//
// Main application entry point.
//
int main(void)
{
#if defined(APP_USE_IPERF)
static uint8_t iperfOk = 0;
#endif
static SYS_TICK startTick = 0;
static IP_ADDR dwLastIP[sizeof (TCPIP_HOSTS_CONFIGURATION) / sizeof (*TCPIP_HOSTS_CONFIGURATION)];
uint8_t i;
// perform system initialization
if(!SYS_Initialize())
{
return 0;
}
SYS_CONSOLE_MESSAGE("\r\n\n\n --- Unified TCPIP Demo Starts! --- \r\n");
SYS_OUT_MESSAGE("TCPStack " TCPIP_STACK_VERSION " "" ");
#if defined(TCPIP_STACK_USE_MPFS) || defined(TCPIP_STACK_USE_MPFS2)
MPFSInit();
#endif
// Initiates board setup process if button is depressed
// on startup
if(BUTTON0_IO == 0u)
{
#if defined(TCPIP_STACK_USE_STORAGE) && (defined(SPIFLASH_CS_TRIS) || defined(EEPROM_CS_TRIS))
// Invalidate the EEPROM contents if BUTTON0 is held down for more than 4 seconds
SYS_TICK StartTime = SYS_TICK_Get();
LED_PUT(0x00);
while(BUTTON0_IO == 0u)
{
if(SYS_TICK_Get() - StartTime > 4*SYS_TICK_TicksPerSecondGet())
{
TCPIP_STORAGE_HANDLE hStorage;
// just in case we execute this before the stack is initialized
TCPIP_STORAGE_Init(0);
hStorage = TCPIP_STORAGE_Open(0, false); // no refresh actually needed
if(hStorage)
{
TCPIP_STORAGE_Erase(hStorage);
SYS_CONSOLE_MESSAGE("\r\n\r\nBUTTON0 held for more than 4 seconds. Default settings restored.\r\n\r\n");
TCPIP_STORAGE_Close(hStorage);
}
else
{
SYS_ERROR(SYS_ERROR_WARN, "\r\n\r\nCould not restore the default settings!!!.\r\n\r\n");
}
TCPIP_STORAGE_DeInit(0);
LED_PUT(0x0F);
// wait 4.5 seconds here then reset
while((SYS_TICK_Get() - StartTime) <= (9*SYS_TICK_TicksPerSecondGet()/2));
LED_PUT(0x00);
while(BUTTON0_IO == 0u);
SYS_Reboot();
break;
}
}
#endif // defined(TCPIP_STACK_USE_STORAGE) && (defined(SPIFLASH_CS_TRIS) || defined(EEPROM_CS_TRIS))
}
// Initialize the TCPIP stack
if(!TCPIP_STACK_Init(TCPIP_HOSTS_CONFIGURATION, sizeof(TCPIP_HOSTS_CONFIGURATION)/sizeof(*TCPIP_HOSTS_CONFIGURATION),
TCPIP_STACK_MODULE_CONFIG_TBL, sizeof(TCPIP_STACK_MODULE_CONFIG_TBL)/sizeof(*TCPIP_STACK_MODULE_CONFIG_TBL) ))
{
return 0;
}
#if defined(TCPIP_STACK_USE_TELNET_SERVER)
TelnetRegisterCallback(ProcessIO);
#endif // defined(TCPIP_STACK_USE_TELNET_SERVER)
#if defined (TCPIP_STACK_USE_IPV6)
TCPIP_ICMPV6_RegisterCallback (ICMPv6Callback);
#endif
#if defined(TCPIP_STACK_USE_ICMP_CLIENT) || defined(TCPIP_STACK_USE_ICMP_SERVER)
ICMPRegisterCallback (PingProcessIPv4);
#endif
#if defined(TCPIP_STACK_USE_EVENT_NOTIFICATION)
TCPIP_NET_HANDLE hWiFi = TCPIP_STACK_NetHandle("MRF24W");
if(hWiFi)
{
TCPIP_STACK_SetNotifyEvents(hWiFi, TCPIP_EV_RX_ALL|TCPIP_EV_TX_ALL|TCPIP_EV_RXTX_ERRORS);
TCPIP_STACK_SetNotifyHandler(hWiFi, StackNotification, 0);
}
#endif // defined(TCPIP_STACK_USE_EVENT_NOTIFICATION)
#if defined(APP_USE_IPERF)
IperfConsoleInit();
iperfOk = IperfAppInit(TCPIP_HOSTS_CONFIGURATION[0].interface);
#endif
// Now that all items are initialized, begin the co-operative
// multitasking loop. This infinite loop will continuously
// execute all stack-related tasks, as well as your own
// application's functions. Custom functions should be added
// at the end of this loop.
// Note that this is a "co-operative mult-tasking" mechanism
// where every task performs its tasks (whether all in one shot
// or part of it) and returns so that other tasks can do their
// job.
// If a task needs very long time to do its job, it must be broken
// down into smaller pieces so that other tasks can have CPU time.
while(1)
{
// Blink LED0 (right most one) every second.
if(SYS_TICK_Get() - startTick >= SYS_TICK_TicksPerSecondGet()/2ul)
{
startTick = SYS_TICK_Get();
LED0_IO ^= 1;
}
// This task performs normal stack task including checking
// for incoming packet, type of packet and calling
// appropriate stack entity to process it.
TCPIP_STACK_Task();
// Process application specific tasks here.
// For this demo app, this will include the Generic TCP
// client and servers, and the SNMP, Ping, and SNMP Trap
// demos. Following that, we will process any IO from
// the inputs on the board itself.
// Any custom modules or processing you need to do should
// go here.
#if defined(TCPIP_STACK_USE_GENERIC_TCP_CLIENT_EXAMPLE)
GenericTCPClient();
#endif
#if defined(TCPIP_STACK_USE_GENERIC_TCP_SERVER_EXAMPLE)
GenericTCPServer();
#endif
#if defined(TCPIP_STACK_USE_SMTP_CLIENT)
SMTPDemo();
#endif
#if defined(TCPIP_STACK_USE_ICMP_CLIENT) || defined (TCPIP_STACK_USE_ICMP_SERVER) || defined (TCPIP_STACK_USE_IPV6)
// use ping on the default interface
PingDemoTask();
#endif
#if defined(TCPIP_STACK_USE_SNMP_SERVER) && !defined(SNMP_TRAP_DISABLED)
//User should use one of the following SNMP demo
// This routine demonstrates V1 or V2 trap formats with one variable binding.
SNMPTrapDemo();
#if defined(SNMP_STACK_USE_V2_TRAP) || defined(SNMP_V1_V2_TRAP_WITH_SNMPV3)
//This routine provides V2 format notifications with multiple (3) variable bindings
//User should modify this routine to send v2 trap format notifications with the required varbinds.
//SNMPV2TrapDemo();
#endif
if(gSendTrapFlag)
SNMPSendTrap();
#endif
#if defined(TCPIP_STACK_USE_BERKELEY_API)
BerkeleyTCPClientDemo();
BerkeleyTCPServerDemo();
BerkeleyUDPClientDemo(0);
#endif
#if defined(APP_USE_IPERF)
IperfConsoleProcess();
if (iperfOk) IperfAppCall(); // Only running in case of init succeed
IperfConsoleProcessEpilogue();
#endif
// If the local IP address has changed (ex: due to DHCP lease change)
// write the new IP address to the console display, UART, and Announce
// service
// We use the default interface
for (i = 0; i < sizeof(TCPIP_HOSTS_CONFIGURATION)/sizeof(*TCPIP_HOSTS_CONFIGURATION); i++)
{
TCPIP_NET_HANDLE netH = TCPIP_STACK_NetHandle(TCPIP_HOSTS_CONFIGURATION[i].interface);
if((uint32_t)dwLastIP[i].Val != TCPIP_STACK_NetAddress(netH))
{
dwLastIP[i].Val = TCPIP_STACK_NetAddress(netH);
SYS_CONSOLE_MESSAGE(TCPIP_HOSTS_CONFIGURATION[i].interface);
SYS_CONSOLE_MESSAGE(" new IP Address: ");
DisplayIPValue(dwLastIP[i]);
SYS_CONSOLE_MESSAGE("\r\n");
}
}
#if defined(TCPIP_STACK_USE_EVENT_NOTIFICATION)
if(stackNotifyCnt)
{
stackNotifyCnt = 0;
ProcessNotification(stackNotifyHandle);
}
#endif // defined(TCPIP_STACK_USE_EVENT_NOTIFICATION)
}
}
int main(void)
#endif
{
BYTE i;
static DWORD t = 0;
static DWORD dwLastIP = 0;
static UINT8 updateDisplay = 0;
#if defined (EZ_CONFIG_STORE)
static DWORD ButtonPushStart = 0;
#endif
#if (MY_DEFAULT_NETWORK_TYPE == WF_SOFT_AP)
UINT8 channelList[] = MY_DEFAULT_CHANNEL_LIST_PRESCAN; // WF_PRESCAN
tWFScanResult bssDesc;
#endif
// Initialize application specific hardware
InitializeBoard();
// Initiates board setup process if button is depressed
// on startup
if (BUTTON1_IO == 0u) {
while (BUTTON1_IO == 0);
SelfTestMode();
}
//#if defined(USE_LCD)
/*******************************************************************/
// Initialize the LCD
/*******************************************************************/
ConfigureLCD_SPI();
LCDInit();
/*******************************************************************/
// Display Start-up Splash Screen
/*******************************************************************/
LCDBacklightON();
LEDS_ON();
LCDErase();
sprintf((char *) LCDText, (char*) " MiWi - WiFi ");
sprintf((char *) &(LCDText[16]), (char*) " Gateway Demo");
LCDUpdate();
/*******************************************************************/
// Initialize the MiWi Protocol Stack. The only input parameter indicates
// if previous network configuration should be restored.
/*******************************************************************/
MiApp_ProtocolInit(FALSE);
/*******************************************************************/
// Set Device Communication Channel
/*******************************************************************/
if (MiApp_SetChannel(myChannel) == FALSE) {
LCDDisplay((char *) "ERROR: Unable to Set Channel..", 0, TRUE);
while (1);
}
/*******************************************************************/
// Set the connection mode. The possible connection modes are:
// ENABLE_ALL_CONN: Enable all kinds of connection
// ENABLE_PREV_CONN: Only allow connection already exists in
// connection table
// ENABL_ACTIVE_SCAN_RSP: Allow response to Active scan
// DISABLE_ALL_CONN: Disable all connections.
/*******************************************************************/
MiApp_ConnectionMode(ENABLE_ALL_CONN);
/*******************************************************************/
// Function MiApp_EstablishConnection try to establish a new
// connection with peer device.
// The first parameter is the index to the active scan result,
// which is acquired by discovery process (active scan). If
// the value of the index is 0xFF, try to establish a
// connection with any peer.
// The second parameter is the mode to establish connection,
// either direct or indirect. Direct mode means connection
// within the radio range; indirect mode means connection
// may or may not in the radio range.
/*******************************************************************/
i = MiApp_EstablishConnection(0xFF, CONN_MODE_DIRECT);
/*******************************************************************/
// Display current opertion on LCD of demo board, if applicable
/*******************************************************************/
if (i != 0xFF) {
; // Connected Peer on Channel
} else {
/*******************************************************************/
// If no network can be found and join, we need to start a new
// network by calling function MiApp_StartConnection
//
// The first parameter is the mode of start connection. There are
// two valid connection modes:
// - START_CONN_DIRECT start the connection on current
// channel
// - START_CONN_ENERGY_SCN perform an energy scan first,
// before starting the connection on
// the channel with least noise
// - START_CONN_CS_SCN perform a carrier sense scan
// first, before starting the
// connection on the channel with
// least carrier sense noise. Not
// supported for current radios
//
// The second parameter is the scan duration, which has the same
// definition in Energy Scan. 10 is roughly 1 second. 9 is a
// half second and 11 is 2 seconds. Maximum scan duration is
// 14, or roughly 16 seconds.
//
// The third parameter is the channel map. Bit 0 of the
// double word parameter represents channel 0. For the 2.4GHz
// frequency band, all possible channels are channel 11 to
// channel 26. As the result, the bit map is 0x07FFF800. Stack
// will filter out all invalid channels, so the application
// only needs to pay attention to the channels that are not
// preferred.
/*******************************************************************/
MiApp_StartConnection(START_CONN_DIRECT, 10, 0);
}
// Turn OFF LCD after setting up MiWi Connection
LCDBacklightOFF();
// Initialize stack-related hardware components that may be
// required by the UART configuration routines
TickInit();
#if defined(STACK_USE_MPFS2)
MPFSInit();
#endif
// Initialize Stack and application related NV variables into AppConfig.
InitAppConfig();
dwLastIP = AppConfig.MyIPAddr.Val;
// Initialize core stack layers (MAC, ARP, TCP, UDP) and
// application modules (HTTP, SNMP, etc.)
StackInit();
#if defined ( EZ_CONFIG_SCAN )
WFInitScan();
#endif
#if (MY_DEFAULT_NETWORK_TYPE == WF_SOFT_AP)
// WF_PRESCAN: Pre-scan before starting up as SoftAP mode
WF_CASetScanType(MY_DEFAULT_SCAN_TYPE);
WF_CASetChannelList(channelList, sizeof (channelList));
if (WFStartScan() == WF_SUCCESS) {
SCAN_SET_DISPLAY(SCANCXT.scanState);
SCANCXT.displayIdx = 0;
//putsUART("main: Prescan WFStartScan() success ................. \r\n");
}
// Needed to trigger g_scan_done
WFRetrieveScanResult(0, &bssDesc);
#else
#if defined(WF_CS_TRIS)
WF_Connect();
#endif // defined(WF_CS_TRIS)
#endif // (MY_DEFAULT_NETWORK_TYPE == WF_SOFT_AP)
// Initialize any application-specific modules or functions/
// For this demo application, this only includes the
// UART 2 TCP Bridge
#if defined(STACK_USE_UART2TCP_BRIDGE)
UART2TCPBridgeInit();
#endif
#if defined(STACK_USE_ZEROCONF_LINK_LOCAL)
ZeroconfLLInitialize();
#endif
#if defined(STACK_USE_ZEROCONF_MDNS_SD)
mDNSInitialize(MY_DEFAULT_HOST_NAME);
mDNSServiceRegister(
(const char *) AppConfig.NetBIOSName, // base name of the service
"_http._tcp.local", // type of the service
80, // TCP or UDP port, at which this service is available
((const BYTE *) "path=/index.htm"), // TXT info
1, // auto rename the service when if needed
NULL, // no callback function
NULL // no application context
);
mDNSMulticastFilterRegister();
#endif
#if defined(WF_CONSOLE)
WFConsoleInit();
#endif
// Now that all items are initialized, begin the co-operative
// multitasking loop. This infinite loop will continuously
// execute all stack-related tasks, as well as your own
// application's functions. Custom functions should be added
// at the end of this loop.
// Note that this is a "co-operative mult-tasking" mechanism
// where every task performs its tasks (whether all in one shot
// or part of it) and returns so that other tasks can do their
// job.
// If a task needs very long time to do its job, it must be broken
// down into smaller pieces so that other tasks can have CPU time.
LEDS_OFF();
while (1) {
/*******************************************************************/
// Check Button Events
/*******************************************************************/
if (BUTTON1_IO == 0u) {
while (BUTTON1_IO == 0);
LCDErase();
sprintf((char *) LCDText, (char*) "Erase Room Info?");
sprintf((char *) &(LCDText[16]), (char*) "SW0:Yes SW2:No");
LCDUpdate();
while (1) {
if (BUTTON1_IO == 0u) {
while (BUTTON1_IO == 0);
LCDDisplay((char *) "STATUS: Erasing...", 0, TRUE);
EraseRoomInfo();
DisplaySSID();
break;
} else if (BUTTON2_IO == 0u) {
while (BUTTON2_IO == 0);
DisplaySSID();
break;
}
}
}
// Blink LED0 twice per sec when unconfigured, once per sec after config
if ((TickGet() - t >= TICK_SECOND / (4ul - (CFGCXT.isWifiDoneConfigure * 2ul)))) {
t = TickGet();
LED0_INV();
}
if(CFGCXT.isWifiNeedToConfigure) updateDisplay = 1;
#if (MY_DEFAULT_NETWORK_TYPE == WF_SOFT_AP)
if (g_scan_done) {
if (g_prescan_waiting) {
SCANCXT.displayIdx = 0;
while (IS_SCAN_STATE_DISPLAY(SCANCXT.scanState)) {
WFDisplayScanMgr();
}
#if defined(WF_CS_TRIS)
WF_Connect();
#endif
DisplaySSID();
g_scan_done = 0;
g_prescan_waiting = 0;
}
}
#endif // (MY_DEFAULT_NETWORK_TYPE == WF_SOFT_AP)
// This task performs normal stack task including checking
// for incoming packet, type of packet and calling
// appropriate stack entity to process it.
StackTask();
WiFiTask();
// This tasks invokes each of the core stack application tasks
StackApplications();
#if defined(STACK_USE_ZEROCONF_LINK_LOCAL)
ZeroconfLLProcess();
#endif
#if defined(STACK_USE_ZEROCONF_MDNS_SD)
mDNSProcess();
// Use this function to exercise service update function
// HTTPUpdateRecord();
#endif
// Process application specific tasks here.
// For this demo app, this will include the Generic TCP
// client and servers, and the SNMP, Ping, and SNMP Trap
// demos. Following that, we will process any IO from
// the inputs on the board itself.
// Any custom modules or processing you need to do should
// go here.
#if defined(WF_CONSOLE)
//WFConsoleProcess();
// #if !defined(STACK_USE_EZ_CONFIG)
// IperfAppCall();
// #endif
//WFConsoleProcessEpilogue();
wait_console_input:
#endif
#if defined(STACK_USE_GENERIC_TCP_CLIENT_EXAMPLE)
GenericTCPClient();
#endif
#if defined(STACK_USE_GENERIC_TCP_SERVER_EXAMPLE)
GenericTCPServer();
#endif
#if defined(STACK_USE_SMTP_CLIENT)
SMTPDemo();
#endif
#if defined(STACK_USE_ICMP_CLIENT)
PingDemo();
//PingConsole();
#endif
#if defined(STACK_USE_SNMP_SERVER) && !defined(SNMP_TRAP_DISABLED)
//User should use one of the following SNMP demo
// This routine demonstrates V1 or V2 trap formats with one variable binding.
SNMPTrapDemo();
#if defined(SNMP_STACK_USE_V2_TRAP) || defined(SNMP_V1_V2_TRAP_WITH_SNMPV3)
//This routine provides V2 format notifications with multiple (3) variable bindings
//User should modify this routine to send v2 trap format notifications with the required varbinds.
//SNMPV2TrapDemo();
#endif
if (gSendTrapFlag)
SNMPSendTrap();
#endif
#if defined ( WF_CONSOLE ) && defined ( EZ_CONFIG_SCAN )
WFDisplayScanMgr();
#endif
#if defined(STACK_USE_BERKELEY_API)
BerkeleyTCPClientDemo();
BerkeleyTCPServerDemo();
BerkeleyUDPClientDemo();
#endif
if((updateDisplay && CFGCXT.isWifiDoneConfigure) || (dwLastIP != AppConfig.MyIPAddr.Val))
{
if(dwLastIP != AppConfig.MyIPAddr.Val)
dwLastIP = AppConfig.MyIPAddr.Val;
if(updateDisplay && CFGCXT.isWifiDoneConfigure)
updateDisplay = 0;
#if defined(STACK_USE_ANNOUNCE)
AnnounceIP();
#endif
#if defined(STACK_USE_ZEROCONF_MDNS_SD)
mDNSFillHostRecord();
#endif
DisplaySSID();
}
}
}
//
// Main application entry point.
//
int main(void)
{
#if defined(HOST_CM_TEST)
DWORD t1 = 0;
char st[80];
BOOL host_scan = FALSE;
UINT16 scan_count = 0;
#endif
static IPV4_ADDR dwLastIP[sizeof (TCPIP_HOSTS_CONFIGURATION) / sizeof (*TCPIP_HOSTS_CONFIGURATION)];
int i, nNets;
#if defined(SYS_USERIO_ENABLE)
static SYS_TICK startTick = 0;
int32_t LEDstate=SYS_USERIO_LED_DEASSERTED;
#endif // defined(SYS_USERIO_ENABLE)
TCPIP_NET_HANDLE netH;
const char *netName=0;
const char *netBiosName;
#if defined (TCPIP_STACK_USE_ZEROCONF_MDNS_SD)
char mDNSServiceName[] = "MyWebServiceNameX "; // base name of the service Must not exceed 16 bytes long
// the last digit will be incremented by interface
#endif // defined (TCPIP_STACK_USE_ZEROCONF_MDNS_SD)
// perform system initialization
if(!SYS_Initialize())
{
return 0;
}
SYS_CONSOLE_MESSAGE("\r\n\n\n --- TCPIP Demo Starts! --- \r\n");
SYS_OUT_MESSAGE("TCPIPStack " TCPIP_STACK_VERSION " "" ");
// Initialize the TCPIP stack
if (!TCPIP_STACK_Init(TCPIP_HOSTS_CONFIGURATION, sizeof (TCPIP_HOSTS_CONFIGURATION) / sizeof (*TCPIP_HOSTS_CONFIGURATION),
TCPIP_STACK_MODULE_CONFIG_TBL, sizeof (TCPIP_STACK_MODULE_CONFIG_TBL) / sizeof (*TCPIP_STACK_MODULE_CONFIG_TBL)))
{
return 0;
}
// Display the names associated with each interface
// Perform mDNS registration if mDNS is enabled
nNets = TCPIP_STACK_NetworksNo();
for(i = 0; i < nNets; i++)
{
netH = TCPIP_STACK_IxToNet(i);
netName = TCPIP_STACK_NetName(netH);
netBiosName = TCPIP_STACK_NetBIOSName(netH);
#if defined(TCPIP_STACK_USE_NBNS)
SYS_CONSOLE_PRINT(" Interface %s on host %s - NBNS enabled\r\n", netName, netBiosName);
#else
SYS_CONSOLE_PRINT(" Interface %s on host %s - NBNS disabled\r\n", netName, netBiosName);
#endif // defined(TCPIP_STACK_USE_NBNS)
#if defined (TCPIP_STACK_USE_ZEROCONF_MDNS_SD)
mDNSServiceName[sizeof(mDNSServiceName) - 2] = '1' + i;
mDNSServiceRegister( netH
, mDNSServiceName // name of the service
,"_http._tcp.local" // type of the service
,80 // TCP or UDP port, at which this service is available
,((const BYTE *)"path=/index.htm") // TXT info
,1 // auto rename the service when if needed
,NULL // no callback function
,NULL); // no application context
#endif //TCPIP_STACK_USE_ZEROCONF_MDNS_SD
}
#if defined (TCPIP_STACK_USE_IPV6)
TCPIP_ICMPV6_RegisterCallback(ICMPv6Callback);
#endif
#if defined(TCPIP_STACK_USE_ICMP_CLIENT)
ICMPRegisterCallback(PingProcessIPv4);
#endif
#if defined(TCPIP_STACK_USE_EVENT_NOTIFICATION)
TCPIP_NET_HANDLE hWiFi = TCPIP_STACK_NetHandle("MRF24W");
if (hWiFi)
{
TCPIP_STACK_RegisterHandler(hWiFi, TCPIP_EV_RX_ALL | TCPIP_EV_TX_ALL | TCPIP_EV_RXTX_ERRORS, StackNotification, 0);
}
#endif // defined(TCPIP_STACK_USE_EVENT_NOTIFICATION)
#if defined(WF_UPDATE_FIRMWARE_UART_24G)
extern bool WF_FirmwareUpdate_Uart_24G(void);
WF_FirmwareUpdate_Uart_24G();
#endif
// Now that all items are initialized, begin the co-operative
// multitasking loop. This infinite loop will continuously
// execute all stack-related tasks, as well as your own
// application's functions. Custom functions should be added
// at the end of this loop.
// Note that this is a "co-operative mult-tasking" mechanism
// where every task performs its tasks (whether all in one shot
// or part of it) and returns so that other tasks can do their
// job.
// If a task needs very long time to do its job, it must be broken
// down into smaller pieces so that other tasks can have CPU time.
while (1)
{
SYS_Tasks();
#if defined(SYS_USERIO_ENABLE)
// Blink LED0 (right most one) every second.
if (SYS_TICK_Get() - startTick >= SYS_TICK_TicksPerSecondGet() / 2ul)
{
startTick = SYS_TICK_Get();
LEDstate ^= SYS_USERIO_LED_ASSERTED;
SYS_USERIO_SetLED(SYS_USERIO_LED_0, LEDstate);
}
#endif // defined(SYS_USERIO_ENABLE)
// This task performs normal stack task including checking
// for incoming packet, type of packet and calling
// appropriate stack entity to process it.
TCPIP_STACK_Task();
// Process application specific tasks here.
// For this demo app, this will include the Generic TCP
// client and servers, and the SNMP, Ping, and SNMP Trap
// demos. Following that, we will process any IO from
// the inputs on the board itself.
// Any custom modules or processing you need to do should
// go here.
#if defined(TCPIP_STACK_USE_TCP) && defined(APP_USE_FTP_CLIENT_DEMO)
FTPClient();
#endif
#if defined(TCPIP_STACK_USE_TCP) && defined(APP_USE_GENERIC_TCP_CLIENT_DEMO)
GenericTCPClient();
#endif
#if defined(TCPIP_STACK_USE_TCP) && defined(APP_USE_GENERIC_TCP_SERVER_DEMO)
GenericTCPServer();
#endif
#if defined(TCPIP_STACK_USE_SMTP_CLIENT) && defined(APP_USE_SMTP_CLIENT_DEMO)
SMTPDemo();
#endif
#if (defined(TCPIP_STACK_USE_ICMP_CLIENT) || defined (TCPIP_STACK_USE_IPV6)) && defined(APP_USE_PING_DEMO)
// use ping on the default interface
PingDemoTask();
#endif
#if defined(TCPIP_STACK_USE_SNMP_SERVER) && !defined(SNMP_TRAP_DISABLED)
// User should use one of the following SNMP demo
// This routine demonstrates V1 or V2 trap formats with one variable binding.
//SNMPTrapDemo(); //This function sends the both SNMP trap version1 and 2 type of notifications
#if defined(SNMP_STACK_USE_V2_TRAP) || defined(SNMP_V1_V2_TRAP_WITH_SNMPV3)
//This routine provides V2 format notifications with multiple (3) variable bindings
//User should modify this routine to send v2 trap format notifications with the required varbinds.
SNMPV2TrapDemo(); //This function sends the SNMP trap version 2 type of notifications
#endif
/*
SNMPSendTrap() is used to send trap notification to previously configured ip address if trap notification is enabled.
There are different trap notification code. The current implementation sends trap for authentication failure (4).
PreCondition: If application defined event occurs to send the trap. Declare a notification flag and update as the event occurs.
Uncomment the below function if the application requires.
if(notification flag is updated by the application as a predefined event occured)
{
SNMPSendTrap();
}
*/
#endif
#if defined(TCPIP_STACK_USE_BERKELEY_API) && defined(APP_USE_BERKELEY_API_DEMO)
BerkeleyTCPClientDemo();
BerkeleyTCPServerDemo();
BerkeleyUDPClientDemo(0);
#endif
// If the local IP address has changed (ex: due to DHCP lease change)
// write the new IP address to the console display, UART, and Announce
// service
// We use the default interface
for (i = 0; i < sizeof (TCPIP_HOSTS_CONFIGURATION) / sizeof (*TCPIP_HOSTS_CONFIGURATION); i++)
{
netH = TCPIP_STACK_NetHandle(TCPIP_HOSTS_CONFIGURATION[i].interface);
if ((uint32_t) dwLastIP[i].Val != TCPIP_STACK_NetAddress(netH))
{
dwLastIP[i].Val = TCPIP_STACK_NetAddress(netH);
SYS_CONSOLE_PRINT("Interface Name is: %s\r\n", TCPIP_HOSTS_CONFIGURATION[i].interface);
SYS_CONSOLE_MESSAGE("New IP Address is: "); DisplayIPValue(dwLastIP[i]);
SYS_CONSOLE_MESSAGE("\r\n");
}
}
#if defined(TCPIP_STACK_USE_EVENT_NOTIFICATION)
if (stackNotifyCnt)
{
stackNotifyCnt = 0;
ProcessNotification(stackNotifyHandle);
}
#endif // defined(TCPIP_STACK_USE_EVENT_NOTIFICATION)
#if defined(WF_UPDATE_FIRMWARE_TCPCLIENT_24G)
void WF_FirmwareUpdate_TcpClient_24G(void);
WF_FirmwareUpdate_TcpClient_24G();
#endif //defined(WF_UPDATE_FIRMWARE_TCPCLIENT_24G)
#if defined(HOST_CM_TEST)
switch (g_event)
{
case WF_EVENT_CONNECTION_PERMANENTLY_LOST:
case WF_EVENT_CONNECTION_FAILED:
g_event = 0xff; // clear current event
// if host scan is active, it can be forced inactive by connection/re-connection process
// so just reset host scan state to inactive.
host_scan = FALSE; // host scan inactive
SYS_CONSOLE_MESSAGE("Reconnecting....\r\n");
WF_Connect();
break;
case WF_EVENT_CONNECTION_SUCCESSFUL:
g_event = 0xff; // clear current event
// if host scan is active, it can be forced inactive by connection/re-connection process
// so just reset host scan state to inactive.
host_scan = FALSE; // host scan inactive
break;
case WF_EVENT_SCAN_RESULTS_READY:
g_event = 0xff; // clear current event
host_scan = FALSE; // host scan inactive
// Scan results are valid - OK to retrieve
if (SCANCXT.numScanResults > 0)
{
SCAN_SET_DISPLAY(SCANCXT.scanState);
SCANCXT.displayIdx = 0;
while (IS_SCAN_STATE_DISPLAY(SCANCXT.scanState))
WFDisplayScanMgr();
}
break;
case WF_EVENT_CONNECTION_TEMPORARILY_LOST:
// This event can happened when CM in module is enabled.
g_event = 0xff; // clear current event
// if host scan is active, it can be forced inactive by connection/re-connection process
// so just reset host scan state to inactive.
host_scan = FALSE; // host scan inactive
break;
default:
//sprintf(st,"skip event = %d\r\n",g_event);
//SYS_CONSOLE_MESSAGE(st);
break;
}
if (g_DhcpSuccessful)
{
/* Send and Receive UDP packets */
if(UDPIsOpened(socket1))
{
// UDP TX every 10 msec
if(SYS_TICK_Get() - timeudp >= SYS_TICK_TicksPerSecondGet() / 100)
{
timeudp = SYS_TICK_Get();
tx_number++;
LED0_IO ^= 1;
sprintf(str,"rem=%12lu",tx_number);
for(cntstr=16;cntstr<999;cntstr++)
str[cntstr]=cntstr;
str[999]=0;
// Send tx_number (formatted in a string)
if(UDPIsTxPutReady(socket1,1000)!=0)
{
UDPPutString(socket1,(BYTE *)str);
UDPFlush(socket1);
SYS_CONSOLE_MESSAGE(".");
}
}
// UDP RX tx_number of remote board
if(UDPIsGetReady(socket1)!=0)
{
LED1_IO ^= 1;
UDPGetArray(socket1,(BYTE *)str,1000);
str[16]=0;
//sprintf((char*)LCDText,"%sloc=%12lu",str,tx_number); // Write on EXP16 LCD local and remote TX number
//strcpypgm2ram(LCDText,str);
//LCDUpdate();
SYS_CONSOLE_MESSAGE("Rx");
}
}
// Do host scan
if((SYS_TICK_Get() - t1) >= SYS_TICK_TicksPerSecondGet() * 20)
{
t1 = SYS_TICK_Get();
if (!host_scan) // allow host scan if currently inactive
{
sprintf(st,"%d Scanning ..... event = %d\r\n",++scan_count, g_event);
SYS_CONSOLE_MESSAGE(st);
host_scan = TRUE; // host scan active
WF_Scan(0xff); // scan on all channels
}
}
} // DHCP status
#endif //HOST_CM_TEST
}
}
int main(void)
#endif
{
// static DWORD t = 0;
static DWORD dwLastIP = 0;
#if defined (EZ_CONFIG_STORE)
// static DWORD ButtonPushStart = 0;
#endif
// Initialize application specific hardware
InitializeBoard();
// Initialize stack-related hardware components that may be
// required by the UART configuration routines
TickInit();
MPFSInit();
InitDataBuffers();
Slave_SpiInit();
// Initialize Stack and application related NV variables into AppConfig.
InitAppConfig();
// Initiates board setup process if button is depressed
// on startup
/*
#if defined (WIFI_BOARD_FOC_HUB)
XEEBeginWrite(0x0000);
XEEWrite(0xFF);
XEEWrite(0xFF);
XEEEndWrite();
#else
if(BUTTON0_IO == 0u)
{
#if defined(EEPROM_CS_TRIS) || defined(SPIFLASH_CS_TRIS)
// Invalidate the EEPROM contents if BUTTON0 is held down for more than 4 seconds
DWORD StartTime = TickGet();
LED_PUT(0x00);
while(BUTTON0_IO == 0u)
{
if(TickGet() - StartTime > 4*TICK_SECOND)
{
#if defined(EEPROM_CS_TRIS)
XEEBeginWrite(0x0000);
XEEWrite(0xFF);
XEEWrite(0xFF);
XEEEndWrite();
#elif defined(SPIFLASH_CS_TRIS)
SPIFlashBeginWrite(0x0000);
SPIFlashWrite(0xFF);
SPIFlashWrite(0xFF);
#endif
#if defined(STACK_USE_UART)
putrsUART("\r\n\r\nBUTTON0 held for more than 4 seconds. Default settings restored.\r\n\r\n");
#endif
LED_PUT(0x0F);
while((LONG)(TickGet() - StartTime) <= (LONG)(9*TICK_SECOND/2));
LED_PUT(0x00);
while(BUTTON0_IO == 0u);
Reset();
break;
}
}
#endif
#if defined(STACK_USE_UART)
DoUARTConfig();
#endif
}
#endif
*/
// Initialize core stack layers (MAC, ARP, TCP, UDP) and
// application modules (HTTP, SNMP, etc.)
StackInit();
#if defined ( EZ_CONFIG_SCAN )
WFInitScan();
#endif
#if defined(WF_CS_TRIS)
WF_Connect();
#endif
#if defined(STACK_USE_ZEROCONF_LINK_LOCAL)
ZeroconfLLInitialize();
#endif
#if defined(STACK_USE_ZEROCONF_MDNS_SD)
mDNSInitialize(MY_DEFAULT_HOST_NAME);
mDNSServiceRegister(
(const char *) "DemoWebServer", // base name of the service
"_http._tcp.local", // type of the service
80, // TCP or UDP port, at which this service is available
((const BYTE *)"path=/index.htm"), // TXT info
1, // auto rename the service when if needed
NULL, // no callback function
NULL // no application context
);
mDNSMulticastFilterRegister();
#endif
// Now that all items are initialized, begin the co-operative
// multitasking loop. This infinite loop will continuously
// execute all stack-related tasks, as well as your own
// application's functions. Custom functions should be added
// at the end of this loop.
// Note that this is a "co-operative mult-tasking" mechanism
// where every task performs its tasks (whether all in one shot
// or part of it) and returns so that other tasks can do their
// job.
// If a task needs very long time to do its job, it must be broken
// down into smaller pieces so that other tasks can have CPU time.
while(1)
{
/*
#if defined (EZ_CONFIG_STORE)
// Hold button3 for 4 seconds to reset to defaults.
if (BUTTON3_IO == 0u) { // Button is pressed
if (ButtonPushStart == 0) //Just pressed
ButtonPushStart = TickGet();
else
if(TickGet() - ButtonPushStart > 4*TICK_SECOND)
RestoreWifiConfig();
}
else
{
ButtonPushStart = 0; //Button release reset the clock
}
if (AppConfig.saveSecurityInfo)
{
// set true by WF_ProcessEvent after connecting to a new network
// get the security info, and if required, push the PSK to EEPROM
if ((AppConfig.SecurityMode == WF_SECURITY_WPA_WITH_PASS_PHRASE) ||
(AppConfig.SecurityMode == WF_SECURITY_WPA2_WITH_PASS_PHRASE) ||
(AppConfig.SecurityMode == WF_SECURITY_WPA_AUTO_WITH_PASS_PHRASE))
{
// only need to save when doing passphrase
tWFCPElements profile;
UINT8 connState;
UINT8 connID;
WF_CMGetConnectionState(&connState, &connID);
WF_CPGetElements(connID, &profile);
memcpy((char*)AppConfig.SecurityKey, (char*)profile.securityKey, 32);
AppConfig.SecurityMode--; // the calc psk is exactly one below for each passphrase option
AppConfig.SecurityKeyLength = 32;
SaveAppConfig(&AppConfig);
}
AppConfig.saveSecurityInfo = FALSE;
}
#endif // EZ_CONFIG_STORE
#if defined (STACK_USE_EZ_CONFIG)
// Blink LED0 twice per sec when unconfigured, once per sec after config
if((TickGet() - t >= TICK_SECOND/(4ul - (CFGCXT.isWifiDoneConfigure*2ul))))
#else
// Blink LED0 (right most one) every second.
if(TickGet() - t >= TICK_SECOND/2ul)
#endif // STACK_USE_EZ_CONFIG
{
t = TickGet();
LED0_IO ^= 1;
}
*/
// This task performs normal stack task including checking
// for incoming packet, type of packet and calling
// appropriate stack entity to process it.
StackTask();
// This tasks invokes each of the core stack application tasks
StackApplications();
// Process command received from Motherboad via SPI interface.
//ProcessReceivedSpiCmds();
#if defined(STACK_USE_ZEROCONF_LINK_LOCAL)
ZeroconfLLProcess();
#endif
#if defined(STACK_USE_ZEROCONF_MDNS_SD)
mDNSProcess();
// Use this function to exercise service update function
// HTTPUpdateRecord();
#endif
// Process application specific tasks here.
// For this demo app, this will include the Generic TCP
// client and servers, and the SNMP, Ping, and SNMP Trap
// demos. Following that, we will process any IO from
// the inputs on the board itself.
// Any custom modules or processing you need to do should
// go here.
#if defined (WIFI_BOARD_FOC_HUB)
ProcessWiFiTransfers(); // Handles TCP/IP transfers
DoWiFiWork(); // Handles SPI incoming requests
#endif
#if defined(WF_CONSOLE)
WFConsoleProcess();
IperfAppCall();
WFConsoleProcessEpilogue();
#endif
#if defined(STACK_USE_GENERIC_TCP_CLIENT_EXAMPLE)
GenericTCPClient();
#endif
#if defined(STACK_USE_GENERIC_TCP_SERVER_EXAMPLE)
GenericTCPServer();
#endif
#if defined(STACK_USE_SMTP_CLIENT)
SMTPDemo();
#endif
#if defined(STACK_USE_ICMP_CLIENT)
PingDemo();
#endif
#if defined(STACK_USE_SNMP_SERVER) && !defined(SNMP_TRAP_DISABLED)
//User should use one of the following SNMP demo
// This routine demonstrates V1 or V2 trap formats with one variable binding.
SNMPTrapDemo();
#if defined(SNMP_STACK_USE_V2_TRAP) || defined(SNMP_V1_V2_TRAP_WITH_SNMPV3)
//This routine provides V2 format notifications with multiple (3) variable bindings
//User should modify this routine to send v2 trap format notifications with the required varbinds.
//SNMPV2TrapDemo();
#endif
if(gSendTrapFlag)
SNMPSendTrap();
#endif
#if defined ( WF_CONSOLE ) && defined ( EZ_CONFIG_SCAN )
WFDisplayScanMgr();
#endif
#if defined(STACK_USE_BERKELEY_API)
BerkeleyTCPClientDemo();
BerkeleyTCPServerDemo();
BerkeleyUDPClientDemo();
#endif
// If the local IP address has changed (ex: due to DHCP lease change)
// write the new IP address to the LCD display, UART, and Announce
// service
if(dwLastIP != AppConfig.MyIPAddr.Val)
{
dwLastIP = AppConfig.MyIPAddr.Val;
WiFiInfo.CurrentConfigPtr->MyIPAddr.Val = AppConfig.MyIPAddr.Val;
#if defined(STACK_USE_UART)
putrsUART((ROM char*)"\r\nNew IP Address: ");
#endif
DisplayIPValue(AppConfig.MyIPAddr);
#if defined(STACK_USE_UART)
putrsUART((ROM char*)"\r\n");
#endif
#if defined(STACK_USE_ANNOUNCE)
AnnounceIP();
#endif
#if defined(STACK_USE_ZEROCONF_MDNS_SD)
mDNSFillHostRecord();
#endif
}
}
}
int main(void)
#endif
{
static DWORD t = 0;
static DWORD dwLastIP = 0;
#if defined (EZ_CONFIG_STORE)
static DWORD ButtonPushStart = 0;
#endif
#if (MY_DEFAULT_NETWORK_TYPE == WF_SOFT_AP)
UINT8 channelList[] = MY_DEFAULT_CHANNEL_LIST_PRESCAN; // WF_PRESCAN
tWFScanResult bssDesc;
#endif
// Initialize application specific hardware
InitializeBoard();
#if defined(USE_LCD)
// Initialize and display the stack version on the LCD
LCDInit();
DelayMs(100);
strcpypgm2ram((char*)LCDText, "TCPStack " TCPIP_STACK_VERSION " "
" ");
LCDUpdate();
#endif
// Initialize stack-related hardware components that may be
// required by the UART configuration routines
TickInit();
#if defined(STACK_USE_MPFS2)
MPFSInit();
#endif
// Initialize Stack and application related NV variables into AppConfig.
InitAppConfig();
// Initiates board setup process if button is depressed
// on startup
if(BUTTON0_IO == 0u)
{
#if defined(EEPROM_CS_TRIS) || defined(SPIFLASH_CS_TRIS)
// Invalidate the EEPROM contents if BUTTON0 is held down for more than 4 seconds
DWORD StartTime = TickGet();
LED_PUT(0x00);
while(BUTTON0_IO == 0u)
{
if(TickGet() - StartTime > 4*TICK_SECOND)
{
#if defined(EEPROM_CS_TRIS)
XEEBeginWrite(0x0000);
XEEWrite(0xFF);
XEEWrite(0xFF);
XEEEndWrite();
#elif defined(SPIFLASH_CS_TRIS)
SPIFlashBeginWrite(0x0000);
SPIFlashWrite(0xFF);
SPIFlashWrite(0xFF);
#endif
#if defined(STACK_USE_UART)
putrsUART("\r\n\r\nBUTTON0 held for more than 4 seconds. Default settings restored.\r\n\r\n");
#endif
LED_PUT(0x0F);
while((LONG)(TickGet() - StartTime) <= (LONG)(9*TICK_SECOND/2));
LED_PUT(0x00);
while(BUTTON0_IO == 0u);
Reset();
break;
}
}
#endif
#if defined(STACK_USE_UART)
DoUARTConfig();
#endif
}
// Initialize core stack layers (MAC, ARP, TCP, UDP) and
// application modules (HTTP, SNMP, etc.)
StackInit();
#if defined ( EZ_CONFIG_SCAN )
WFInitScan();
#endif
#if (MY_DEFAULT_NETWORK_TYPE == WF_SOFT_AP)
// WF_PRESCAN: Pre-scan before starting up as SoftAP mode
WF_CASetScanType(MY_DEFAULT_SCAN_TYPE);
WF_CASetChannelList(channelList, sizeof(channelList));
if (WFStartScan() == WF_SUCCESS)
{
SCAN_SET_DISPLAY(SCANCXT.scanState);
SCANCXT.displayIdx = 0;
//putsUART("main: Prescan WFStartScan() success ................. \r\n");
}
// Needed to trigger g_scan_done
WFRetrieveScanResult(0, &bssDesc);
#else
#if defined(WF_CS_TRIS)
WF_Connect();
#endif // defined(WF_CS_TRIS)
#endif // (MY_DEFAULT_NETWORK_TYPE == WF_SOFT_AP)
// Initialize any application-specific modules or functions/
// For this demo application, this only includes the
// UART 2 TCP Bridge
#if defined(STACK_USE_UART2TCP_BRIDGE)
UART2TCPBridgeInit();
#endif
#if defined(STACK_USE_ZEROCONF_LINK_LOCAL)
ZeroconfLLInitialize();
#endif
#if defined(STACK_USE_ZEROCONF_MDNS_SD)
mDNSInitialize(MY_DEFAULT_HOST_NAME);
#if defined(STACK_USE_TCP_MOBILE_APP_SERVER)
mDNSServiceRegister(
(const char *) "HomeControlServer", // base name of the service
"_home-control._tcp.local", // type of the service
27561, // TCP or UDP port, at which this service is available
((const BYTE *)"control home devices"), // TXT info
1, // auto rename the service when if needed
NULL, // no callback function
NULL // no application context
);
#else /* !defined(STACK_USE_TCP_MOBILE_APP_SERVER) */
mDNSServiceRegister(
(const char *) "DemoWebServer", // base name of the service
"_http._tcp.local", // type of the service
80, // TCP or UDP port, at which this service is available
((const BYTE *)"path=/index.htm"), // TXT info
1, // auto rename the service when if needed
NULL, // no callback function
NULL // no application context
);
#endif /* defined(STACK_USE_TCP_MOBILE_APP_SERVER) */
mDNSMulticastFilterRegister();
#endif
#if defined(WF_CONSOLE)
WFConsoleInit();
#endif
// Now that all items are initialized, begin the co-operative
// multitasking loop. This infinite loop will continuously
// execute all stack-related tasks, as well as your own
// application's functions. Custom functions should be added
// at the end of this loop.
// Note that this is a "co-operative mult-tasking" mechanism
// where every task performs its tasks (whether all in one shot
// or part of it) and returns so that other tasks can do their
// job.
// If a task needs very long time to do its job, it must be broken
// down into smaller pieces so that other tasks can have CPU time.
while(1)
{
#if (MY_DEFAULT_NETWORK_TYPE == WF_SOFT_AP)
if (g_scan_done) {
if (g_prescan_waiting) {
putrsUART((ROM char*)"\n SoftAP prescan results ........ \r\n\n");
SCANCXT.displayIdx = 0;
while (IS_SCAN_STATE_DISPLAY(SCANCXT.scanState)) {
WFDisplayScanMgr();
}
putrsUART((ROM char*)"\r\n ");
#if defined(WF_CS_TRIS)
WF_Connect();
#endif
g_scan_done = 0;
g_prescan_waiting = 0;
}
}
#endif // (MY_DEFAULT_NETWORK_TYPE == WF_SOFT_AP)
#if defined(WF_PRE_SCAN_IN_ADHOC)
if(g_prescan_adhoc_done)
{
WFGetScanResults();
g_prescan_adhoc_done = 0;
}
#endif
#if defined (EZ_CONFIG_STORE)
// Hold button3 for 4 seconds to reset to defaults.
if (BUTTON3_IO == 0u) { // Button is pressed
if (ButtonPushStart == 0) //Just pressed
ButtonPushStart = TickGet();
else
if(TickGet() - ButtonPushStart > 4*TICK_SECOND)
RestoreWifiConfig();
}
else
{
ButtonPushStart = 0; //Button release reset the clock
}
if (AppConfig.saveSecurityInfo)
{
// set true by WF_ProcessEvent after connecting to a new network
// get the security info, and if required, push the PSK to EEPROM
if ((AppConfig.SecurityMode == WF_SECURITY_WPA_WITH_PASS_PHRASE) ||
(AppConfig.SecurityMode == WF_SECURITY_WPA2_WITH_PASS_PHRASE) ||
(AppConfig.SecurityMode == WF_SECURITY_WPA_AUTO_WITH_PASS_PHRASE))
{
// only need to save when doing passphrase
tWFCPElements profile;
UINT8 connState;
UINT8 connID;
WF_CMGetConnectionState(&connState, &connID);
WF_CPGetElements(connID, &profile);
memcpy((char*)AppConfig.SecurityKey, (char*)profile.securityKey, 32);
AppConfig.SecurityMode--; // the calc psk is exactly one below for each passphrase option
AppConfig.SecurityKeyLength = 32;
SaveAppConfig(&AppConfig);
}
AppConfig.saveSecurityInfo = FALSE;
}
#endif // EZ_CONFIG_STORE
#if defined (STACK_USE_EZ_CONFIG)
// Blink LED0 twice per sec when unconfigured, once per sec after config
if((TickGet() - t >= TICK_SECOND/(4ul - (CFGCXT.isWifiDoneConfigure*2ul))))
#else
// Blink LED0 (right most one) every second.
if(TickGet() - t >= TICK_SECOND/2ul)
#endif // STACK_USE_EZ_CONFIG
{
t = TickGet();
LED0_IO ^= 1;
}
// This task performs normal stack task including checking
// for incoming packet, type of packet and calling
// appropriate stack entity to process it.
StackTask();
// This tasks invokes each of the core stack application tasks
StackApplications();
#if defined(STACK_USE_ZEROCONF_LINK_LOCAL)
ZeroconfLLProcess();
#endif
#if defined(STACK_USE_ZEROCONF_MDNS_SD)
mDNSProcess();
// Use this function to exercise service update function
// HTTPUpdateRecord();
#endif
// Process application specific tasks here.
// For this demo app, this will include the Generic TCP
// client and servers, and the SNMP, Ping, and SNMP Trap
// demos. Following that, we will process any IO from
// the inputs on the board itself.
// Any custom modules or processing you need to do should
// go here.
#if defined(WF_CONSOLE)
WFConsoleProcess();
WFConsoleProcessEpilogue();
#endif
#if defined(STACK_USE_GENERIC_TCP_CLIENT_EXAMPLE)
GenericTCPClient();
#endif
#if defined(STACK_USE_GENERIC_TCP_SERVER_EXAMPLE)
GenericTCPServer();
#endif
#if defined(STACK_USE_TCP_MOBILE_APP_SERVER)
MobileTCPServer();
#endif
#if defined(STACK_USE_SMTP_CLIENT)
SMTPDemo();
#endif
#if defined(STACK_USE_ICMP_CLIENT)
PingDemo();
PingConsole();
#endif
#if defined(STACK_USE_SNMP_SERVER) && !defined(SNMP_TRAP_DISABLED)
//User should use one of the following SNMP demo
// This routine demonstrates V1 or V2 trap formats with one variable binding.
SNMPTrapDemo();
#if defined(SNMP_STACK_USE_V2_TRAP) || defined(SNMP_V1_V2_TRAP_WITH_SNMPV3)
//This routine provides V2 format notifications with multiple (3) variable bindings
//User should modify this routine to send v2 trap format notifications with the required varbinds.
//SNMPV2TrapDemo();
#endif
if(gSendTrapFlag)
SNMPSendTrap();
#endif
#if defined(STACK_USE_BERKELEY_API)
BerkeleyTCPClientDemo();
BerkeleyTCPServerDemo();
BerkeleyUDPClientDemo();
#endif
// If the local IP address has changed (ex: due to DHCP lease change)
// write the new IP address to the LCD display, UART, and Announce
// service
if(dwLastIP != AppConfig.MyIPAddr.Val)
{
dwLastIP = AppConfig.MyIPAddr.Val;
#if defined(STACK_USE_UART)
putrsUART((ROM char*)"\r\nNew IP Address: ");
#endif
DisplayIPValue(AppConfig.MyIPAddr);
#if defined(STACK_USE_UART)
putrsUART((ROM char*)"\r\n");
#endif
#if defined(STACK_USE_ANNOUNCE)
AnnounceIP();
#endif
#if defined(STACK_USE_ZEROCONF_MDNS_SD)
mDNSFillHostRecord();
#endif
}
}
}
int main(void)
#endif
{
static DWORD t = 0;
static DWORD dwLastIP = 0;
#if defined(WF_USE_POWER_SAVE_FUNCTIONS)
BOOL PsPollEnabled;
BOOL psConfDone = FALSE;
#endif
// Initialize application specific hardware
InitializeBoard();
#if defined(USE_LCD)
// Initialize and display the stack version on the LCD
LCDInit();
DelayMs(100);
strcpypgm2ram((char*)LCDText, "TCPStack " TCPIP_STACK_VERSION " "
" ");
LCDUpdate();
#endif
// Initialize stack-related hardware components that may be
// required by the UART configuration routines
TickInit();
#if defined(STACK_USE_MPFS2)
MPFSInit();
#endif
// Initialize Stack and application related NV variables into AppConfig.
InitAppConfig();
// Initiates board setup process if button is depressed
// on startup
if(BUTTON0_IO == 0u)
{
#if defined(EEPROM_CS_TRIS) || defined(SPIFLASH_CS_TRIS)
// Invalidate the EEPROM contents if BUTTON0 is held down for more than 4 seconds
DWORD StartTime = TickGet();
LED_PUT(0x00);
while(BUTTON0_IO == 0u)
{
if(TickGet() - StartTime > 4*TICK_SECOND)
{
#if defined(EEPROM_CS_TRIS)
XEEBeginWrite(0x0000);
XEEWrite(0xFF);
XEEWrite(0xFF);
XEEEndWrite();
#elif defined(SPIFLASH_CS_TRIS)
SPIFlashBeginWrite(0x0000);
SPIFlashWrite(0xFF);
SPIFlashWrite(0xFF);
#endif
#if defined(STACK_USE_UART)
putrsUART("\r\n\r\nBUTTON0 held for more than 4 seconds. Default settings restored.\r\n\r\n");
#endif
LED_PUT(0x0F);
while((LONG)(TickGet() - StartTime) <= (LONG)(9*TICK_SECOND/2));
LED_PUT(0x00);
while(BUTTON0_IO == 0u);
Reset();
break;
}
}
#endif
#if defined(STACK_USE_UART)
DoUARTConfig();
#endif
}
// Initialize core stack layers (MAC, ARP, TCP, UDP) and
// application modules (HTTP, SNMP, etc.)
StackInit();
#if defined(WF_CS_TRIS)
WF_Connect();
#endif
// Initialize any application-specific modules or functions/
// For this demo application, this only includes the
// UART 2 TCP Bridge
#if defined(STACK_USE_UART2TCP_BRIDGE)
UART2TCPBridgeInit();
#endif
#if defined(STACK_USE_ZEROCONF_LINK_LOCAL)
ZeroconfLLInitialize();
#endif
#if defined(STACK_USE_ZEROCONF_MDNS_SD)
mDNSInitialize(MY_DEFAULT_HOST_NAME);
mDNSServiceRegister(
(const char *) "DemoWebServer", // base name of the service
"_http._tcp.local", // type of the service
80, // TCP or UDP port, at which this service is available
((const BYTE *)"path=/index.htm"), // TXT info
1, // auto rename the service when if needed
NULL, // no callback function
NULL // no application context
);
mDNSMulticastFilterRegister();
#endif
// Now that all items are initialized, begin the co-operative
// multitasking loop. This infinite loop will continuously
// execute all stack-related tasks, as well as your own
// application's functions. Custom functions should be added
// at the end of this loop.
// Note that this is a "co-operative mult-tasking" mechanism
// where every task performs its tasks (whether all in one shot
// or part of it) and returns so that other tasks can do their
// job.
// If a task needs very long time to do its job, it must be broken
// down into smaller pieces so that other tasks can have CPU time.
while(1)
{
//while (1)
/*{
if(BUTTON0_IO == 0u && LED0_IO == 0)
{
LED0_IO =1;
}
if(BUTTON0_IO == 0u && LED0_IO ==1)
{
LED0_IO =0;
}
}*/
#if defined(WF_USE_POWER_SAVE_FUNCTIONS)
if (!psConfDone && WFisConnected()) {
PsPollEnabled = (MY_DEFAULT_PS_POLL == WF_ENABLED);
if (!PsPollEnabled) {
/* disable low power (PS-Poll) mode */
#if defined(STACK_USE_UART)
putrsUART("Disable PS-Poll\r\n");
#endif
WF_PsPollDisable();
} else {
/* Enable low power (PS-Poll) mode */
#if defined(STACK_USE_UART)
putrsUART("Enable PS-Poll\r\n");
#endif
WF_PsPollEnable(TRUE);
}
psConfDone = TRUE;
}
#endif
// Blink LED0 (right most one) every second.
// if(TickGet() - t >= TICK_SECOND/2ul)
// {
// t = TickGet();
// LED0_IO ^= 1;
// }
// This task performs normal stack task including checking
// for incoming packet, type of packet and calling
// appropriate stack entity to process it.
StackTask();
// This tasks invokes each of the core stack application tasks
StackApplications();
#if defined(STACK_USE_ZEROCONF_LINK_LOCAL)
ZeroconfLLProcess();
#endif
#if defined(STACK_USE_ZEROCONF_MDNS_SD)
mDNSProcess();
// Use this function to exercise service update function
// HTTPUpdateRecord();
#endif
// Process application specific tasks here.
// For this demo app, this will include the Generic TCP
// client and servers, and the SNMP, Ping, and SNMP Trap
// demos. Following that, we will process any IO from
// the inputs on the board itself.
// Any custom modules or processing you need to do should
// go here.
#if defined(STACK_USE_GENERIC_TCP_CLIENT_EXAMPLE)
GenericTCPClient();
#endif
#if defined(STACK_USE_GENERIC_TCP_SERVER_EXAMPLE)
GenericTCPServer();
#endif
#if defined(STACK_USE_SMTP_CLIENT)
SMTPDemo();
#endif
#if defined(STACK_USE_ICMP_CLIENT)
PingDemo();
#endif
#if defined(STACK_USE_SNMP_SERVER) && !defined(SNMP_TRAP_DISABLED)
//User should use one of the following SNMP demo
// This routine demonstrates V1 or V2 trap formats with one variable binding.
SNMPTrapDemo();
#if defined(SNMP_STACK_USE_V2_TRAP) || defined(SNMP_V1_V2_TRAP_WITH_SNMPV3)
//This routine provides V2 format notifications with multiple (3) variable bindings
//User should modify this routine to send v2 trap format notifications with the required varbinds.
//SNMPV2TrapDemo();
#endif
if(gSendTrapFlag)
SNMPSendTrap();
#endif
#if defined(STACK_USE_BERKELEY_API)
BerkeleyTCPClientDemo();
BerkeleyTCPServerDemo();
BerkeleyUDPClientDemo();
#endif
ProcessIO();
// If the local IP address has changed (ex: due to DHCP lease change)
// write the new IP address to the LCD display, UART, and Announce
// service
if(dwLastIP != AppConfig.MyIPAddr.Val)
{
dwLastIP = AppConfig.MyIPAddr.Val;
#if defined(STACK_USE_UART)
putrsUART((ROM char*)"\r\nNew IP Address: ");
#endif
DisplayIPValue(AppConfig.MyIPAddr);
#if defined(STACK_USE_UART)
putrsUART((ROM char*)"\r\n");
#endif
#if defined(STACK_USE_ANNOUNCE)
AnnounceIP();
#endif
#if defined(STACK_USE_ZEROCONF_MDNS_SD)
mDNSFillHostRecord();
#endif
}
}
}
int main(void)
#endif
{
unsigned char counter = 0;
static DWORD Ping_Start_Time = 0;
static unsigned char Ping_Counter = 0;
static DWORD t = 0;
static DWORD dwLastIP = 0;
LED0_TRIS = 0;
LED0_IO = 1;
Delay10KTCYx(0);
// Initialize application specific hardware
InitializeBoard();
#ifdef APP_USE_USB
InitializeUSB();
#if defined(USB_INTERRUPT)
USBDeviceAttach();
#endif
#endif
#if defined(USE_LCD)
// Initialize and display the stack version on the LCD
LCDInit();
DelayMs(100);
strcpypgm2ram((char*)LCDText, "TCPStack " VERSION " "
" ");
LCDUpdate();
#endif
// Initialize stack-related hardware components that may be
// required by the UART configuration routines
TickInit();
#if defined(STACK_USE_MPFS) || defined(STACK_USE_MPFS2)
MPFSInit();
#endif
// Initialize Stack and application related NV variables into AppConfig.
InitAppConfig();
// Initiates board setup process if button is depressed
// on startup
if(BUTTON0_IO == 0u)
{
#if defined(EEPROM_CS_TRIS) || defined(SPIFLASH_CS_TRIS)
// Invalidate the EEPROM contents if BUTTON0 is held down for more than 4 seconds
DWORD StartTime = TickGet();
LED_PUT(0x00);
#ifdef TRANSCEIVER_BOARD
#elif defined( SINGLEPHASEMETER_MCU1 )
while(BUTTON0_IO == 0u)
{
if(TickGet() - StartTime > 4*TICK_SECOND)
{
#if defined(EEPROM_CS_TRIS)
XEEBeginWrite(0x0000);
XEEWrite(0xFF);
XEEEndWrite();
#elif defined(SPIFLASH_CS_TRIS)
SPIFlashBeginWrite(0x0000);
SPIFlashWrite(0xFF);
#endif
#if defined(STACK_USE_UART)
putrsUART("\r\n\r\nBUTTON0 held for more than 4 seconds. Default settings restored.\r\n\r\n");
#endif
LED_PUT(0x0F);
while((LONG)(TickGet() - StartTime) <= (LONG)(9*TICK_SECOND/2));
LED_PUT(0x00);
while(BUTTON0_IO == 0u);
Reset();
break;
}
}
#else
#error "No board defined."
#endif
#endif
#if defined(STACK_USE_UART)
DoUARTConfig();
#endif
}
// Initialize core stack layers (MAC, ARP, TCP, UDP) and
// application modules (HTTP, SNMP, etc.)
StackInit();
// Initialize any application-specific modules or functions/
// For this demo application, this only includes the
// UART 2 TCP Bridge
#if defined(STACK_USE_UART2TCP_BRIDGE)
UART2TCPBridgeInit();
#endif
#ifdef SINGLEPHASEMETER_MCU1
MCUOpen();
#endif
#ifdef APP_USE_ZIGBEE
ZigbeeOpen();
#else
//#error no zigbee.
#endif
#ifdef APP_USE_RGB
OpenRGB();
#endif
// ROUTER CODES
#ifdef APP_USE_ROUTER_CODES
{
}
#endif
// END
// Now that all items are initialized, begin the co-operative
// multitasking loop. This infinite loop will continuously
// execute all stack-related tasks, as well as your own
// application's functions. Custom functions should be added
// at the end of this loop.
// Note that this is a "co-operative mult-tasking" mechanism
// where every task performs its tasks (whether all in one shot
// or part of it) and returns so that other tasks can do their
// job.
// If a task needs very long time to do its job, it must be broken
// down into smaller pieces so that other tasks can have CPU time.
while(1)
{
#ifdef SINGLEPHASEMETER_MCU1
MCUTasks();
#endif
#ifdef APP_USE_RGB
RGBTasks();
#endif
/**********************************************/
/**** Handle USB ******************************/
/**********************************************/
#if defined(USB_POLLING)
// Check bus status and service USB interrupts.
USBDeviceTasks(); // Interrupt or polling method. If using polling, must call
// this function periodically. This function will take care
// of processing and responding to SETUP transactions
// (such as during the enumeration process when you first
// plug in). USB hosts require that USB devices should accept
// and process SETUP packets in a timely fashion. Therefore,
// when using polling, this function should be called
// frequently (such as once about every 100 microseconds) at any
// time that a SETUP packet might reasonably be expected to
// be sent by the host to your device. In most cases, the
// USBDeviceTasks() function does not take very long to
// execute (~50 instruction cycles) before it returns.
#endif
// Application-specific tasks.
// Application related code may be added here, or in the ProcessIO() function.
ProcessUSBIO();
/**********************************************/
/**** Handle Zigbee ******************************/
/**********************************************/
#ifdef APP_USE_ZIGBEE
ZigbeeTasks();
{
if( counter++ > 200 )
{
char s[16] = {0x10, 0x01, 0, 0, 0, 0, 0, 0, 0xff, 0xfe, 0xff, 0xfe, 0, 0, 'A', '4'}; // , 0x64};
ZigbeeAPISendString(16, s);
counter = 0;
}
}
#endif
// Main program loop.
// Set up ping and node statuses. A ping is sent every 4 mins and a check is done every minute.
// Nodes that have not pinged within 5 min frame will be delisted as in the network.
if( Ping_Start_Time != 0 && (TickGet() - Ping_Start_Time) > (TICK_MINUTE) )
{
// Check nodes that have not sent their ping within the past 5 minutes.
{}
// Send out a ping if 4 minutes have lapsed.
if( Ping_Counter++ >= 4 )
{}
}
Ping_Start_Time = TickGet();
// Blink LED0 (right most one) every second.
if(TickGet() - t >= TICK_SECOND/2ul)
{
t = TickGet();
LED0_IO ^= 1;
}
// This task performs normal stack task including checking
// for incoming packet, type of packet and calling
// appropriate stack entity to process it.
StackTask();
// This tasks invokes each of the core stack application tasks
StackApplications();
// Process application specific tasks here.
// For this demo app, this will include the Generic TCP
// client and servers, and the SNMP, Ping, and SNMP Trap
// demos. Following that, we will process any IO from
// the inputs on the board itself.
// Any custom modules or processing you need to do should
// go here.
#if defined(STACK_USE_GENERIC_TCP_CLIENT_EXAMPLE)
GenericTCPClient();
#endif
#if defined(STACK_USE_GENERIC_TCP_SERVER_EXAMPLE)
GenericTCPServer();
#endif
#if defined(STACK_USE_SMTP_CLIENT)
SMTPDemo();
#endif
#if defined(STACK_USE_ICMP_CLIENT)
PingDemo();
#endif
#if defined(STACK_USE_SNMP_SERVER) && !defined(SNMP_TRAP_DISABLED)
SNMPTrapDemo();
if(gSendTrapFlag)
SNMPSendTrap();
#endif
#if defined(STACK_USE_BERKELEY_API)
BerkeleyTCPClientDemo();
BerkeleyTCPServerDemo();
BerkeleyUDPClientDemo();
#endif
#ifdef APP_USE_RGB
RGBTasks();
#endif
//ProcessIO();
// If the local IP address has changed (ex: due to DHCP lease change)
// write the new IP address to the LCD display, UART, and Announce
// service
if(dwLastIP != AppConfig.MyIPAddr.Val)
{
dwLastIP = AppConfig.MyIPAddr.Val;
#if defined(STACK_USE_UART)
putrsUART((ROM char*)"\r\nNew IP Address: ");
#endif
DisplayIPValue(AppConfig.MyIPAddr);
#if defined(STACK_USE_UART)
putrsUART((ROM char*)"\r\n");
#endif
#if defined(STACK_USE_ANNOUNCE)
AnnounceIP();
#endif
}
}
}