ssize_t
DaemonSocketPDU::Receive(int aFd)
{
struct iovec iv;
memset(&iv, 0, sizeof(iv));
iv.iov_base = GetData(0);
iv.iov_len = GetAvailableSpace();
uint8_t cmsgbuf[CMSG_SPACE(sizeof(int)* MAX_NFDS)];
struct msghdr msg;
memset(&msg, 0, sizeof(msg));
msg.msg_iov = &iv;
msg.msg_iovlen = 1;
msg.msg_control = cmsgbuf;
msg.msg_controllen = sizeof(cmsgbuf);
ssize_t res = TEMP_FAILURE_RETRY(recvmsg(aFd, &msg, MSG_NOSIGNAL));
if (res < 0) {
MOZ_ASSERT(errno != EBADF); /* internal error */
OnError("recvmsg", errno);
return -1;
}
if (msg.msg_flags & (MSG_CTRUNC | MSG_OOB | MSG_ERRQUEUE)) {
return -1;
}
SetRange(0, res);
struct cmsghdr* chdr = CMSG_FIRSTHDR(&msg);
for (; chdr; chdr = CMSG_NXTHDR(&msg, chdr)) {
if (NS_WARN_IF(!CMSGHDR_CONTAINS_FD(chdr))) {
continue;
}
// Retrieve sent file descriptors.
size_t fdCount = (chdr->cmsg_len - CMSG_ALIGN(sizeof(struct cmsghdr))) / sizeof(int);
for (size_t i = 0; i < fdCount; i++) {
int* receivedFd = static_cast<int*>(CMSG_DATA(chdr)) + i;
mReceivedFds.AppendElement(*receivedFd);
}
}
return res;
}
ssize_t
DaemonSocketPDU::Receive(int aFd)
{
struct iovec iv;
memset(&iv, 0, sizeof(iv));
iv.iov_base = GetData(0);
iv.iov_len = GetAvailableSpace();
uint8_t cmsgbuf[CMSG_SPACE(sizeof(int))];
struct msghdr msg;
memset(&msg, 0, sizeof(msg));
msg.msg_iov = &iv;
msg.msg_iovlen = 1;
msg.msg_control = cmsgbuf;
msg.msg_controllen = sizeof(cmsgbuf);
ssize_t res = TEMP_FAILURE_RETRY(recvmsg(aFd, &msg, MSG_NOSIGNAL));
if (res < 0) {
MOZ_ASSERT(errno != EBADF); /* internal error */
OnError("recvmsg", errno);
return -1;
}
if (msg.msg_flags & (MSG_CTRUNC | MSG_OOB | MSG_ERRQUEUE)) {
return -1;
}
SetRange(0, res);
struct cmsghdr *chdr = CMSG_FIRSTHDR(&msg);
for (; chdr; chdr = CMSG_NXTHDR(&msg, chdr)) {
if (NS_WARN_IF(!CMSGHDR_CONTAINS_FD(chdr))) {
continue;
}
// Retrieve sent file descriptor. If multiple file descriptors
// have been sent, we close all but the final one.
mReceivedFd = *(static_cast<int*>(CMSG_DATA(chdr)));
}
return res;
}
PRBool
nsBlockReflowState::FlowAndPlaceFloat(nsFloatCache* aFloatCache,
PRBool* aIsLeftFloat,
nsReflowStatus& aReflowStatus,
PRBool aForceFit)
{
aReflowStatus = NS_FRAME_COMPLETE;
// Save away the Y coordinate before placing the float. We will
// restore mY at the end after placing the float. This is
// necessary because any adjustments to mY during the float
// placement are for the float only, not for any non-floating
// content.
nscoord saveY = mY;
nsPlaceholderFrame* placeholder = aFloatCache->mPlaceholder;
nsIFrame* floatFrame = placeholder->GetOutOfFlowFrame();
// Grab the float's display information
const nsStyleDisplay* floatDisplay = floatFrame->GetStyleDisplay();
// The float's old region, so we can propagate damage.
nsRect oldRegion = aFloatCache->mRegion;
// Enforce CSS2 9.5.1 rule [2], i.e., make sure that a float isn't
// ``above'' another float that preceded it in the flow.
mY = NS_MAX(mSpaceManager->GetLowestRegionTop() + BorderPadding().top, mY);
// See if the float should clear any preceding floats...
// XXX We need to mark this float somehow so that it gets reflowed
// when floats are inserted before it.
if (NS_STYLE_CLEAR_NONE != floatDisplay->mBreakType) {
// XXXldb Does this handle vertical margins correctly?
mY = ClearFloats(mY, floatDisplay->mBreakType);
}
// Get the band of available space
GetAvailableSpace(mY, aForceFit);
NS_ASSERTION(floatFrame->GetParent() == mBlock,
"Float frame has wrong parent");
// Reflow the float
nsMargin floatMargin;
mBlock->ReflowFloat(*this, placeholder, floatMargin, aReflowStatus);
#ifdef DEBUG
if (nsBlockFrame::gNoisyReflow) {
nsRect region = floatFrame->GetRect();
nsFrame::IndentBy(stdout, nsBlockFrame::gNoiseIndent);
printf("flowed float: ");
nsFrame::ListTag(stdout, floatFrame);
printf(" (%d,%d,%d,%d)\n",
region.x, region.y, region.width, region.height);
}
#endif
nsSize floatSize = floatFrame->GetSize() +
nsSize(floatMargin.LeftRight(), floatMargin.TopBottom());
// Find a place to place the float. The CSS2 spec doesn't want
// floats overlapping each other or sticking out of the containing
// block if possible (CSS2 spec section 9.5.1, see the rule list).
NS_ASSERTION((NS_STYLE_FLOAT_LEFT == floatDisplay->mFloats) ||
(NS_STYLE_FLOAT_RIGHT == floatDisplay->mFloats),
"invalid float type");
// Can the float fit here?
PRBool keepFloatOnSameLine = PR_FALSE;
while (!CanPlaceFloat(floatSize, floatDisplay->mFloats, aForceFit)) {
if (mAvailSpaceRect.height <= 0) {
// No space, nowhere to put anything.
mY = saveY;
return PR_FALSE;
}
// Nope. try to advance to the next band.
if (NS_STYLE_DISPLAY_TABLE != floatDisplay->mDisplay ||
eCompatibility_NavQuirks != mPresContext->CompatibilityMode() ) {
mY += mAvailSpaceRect.height;
GetAvailableSpace(mY, aForceFit);
} else {
// This quirk matches the one in nsBlockFrame::ReflowFloat
// IE handles float tables in a very special way
// see if the previous float is also a table and has "align"
nsFloatCache* fc = mCurrentLineFloats.Head();
nsIFrame* prevFrame = nsnull;
while (fc) {
if (fc->mPlaceholder->GetOutOfFlowFrame() == floatFrame) {
break;
}
prevFrame = fc->mPlaceholder->GetOutOfFlowFrame();
fc = fc->Next();
}
if(prevFrame) {
//get the frame type
if (nsGkAtoms::tableOuterFrame == prevFrame->GetType()) {
//see if it has "align="
// IE makes a difference between align and he float property
nsIContent* content = prevFrame->GetContent();
if (content) {
// we're interested only if previous frame is align=left
// IE messes things up when "right" (overlapping frames)
if (content->AttrValueIs(kNameSpaceID_None, nsGkAtoms::align,
NS_LITERAL_STRING("left"), eIgnoreCase)) {
keepFloatOnSameLine = PR_TRUE;
// don't advance to next line (IE quirkie behaviour)
// it breaks rule CSS2/9.5.1/1, but what the hell
// since we cannot evangelize the world
break;
}
}
}
}
// the table does not fit anymore in this line so advance to next band
mY += mAvailSpaceRect.height;
GetAvailableSpace(mY, aForceFit);
// reflow the float again now since we have more space
// XXXldb We really don't need to Reflow in a loop, we just need
// to ComputeSize in a loop (once ComputeSize depends on
// availableWidth, which should make this work again).
mBlock->ReflowFloat(*this, placeholder, floatMargin, aReflowStatus);
// Get the floats bounding box and margin information
floatSize = floatFrame->GetSize() +
nsSize(floatMargin.LeftRight(), floatMargin.TopBottom());
}
}
// If the float is continued, it will get the same absolute x value as its prev-in-flow
// We don't worry about the geometry of the prev in flow, let the continuation
// place and size itself as required.
// Assign an x and y coordinate to the float. Note that the x,y
// coordinates are computed <b>relative to the translation in the
// spacemanager</b> which means that the impacted region will be
// <b>inside</b> the border/padding area.
PRBool isLeftFloat;
nscoord floatX, floatY;
if (NS_STYLE_FLOAT_LEFT == floatDisplay->mFloats) {
isLeftFloat = PR_TRUE;
floatX = mAvailSpaceRect.x;
}
else {
isLeftFloat = PR_FALSE;
if (!keepFloatOnSameLine) {
floatX = mAvailSpaceRect.XMost() - floatSize.width;
}
else {
// this is the IE quirk (see few lines above)
// the table is kept in the same line: don't let it overlap the
// previous float
floatX = mAvailSpaceRect.x;
}
}
*aIsLeftFloat = isLeftFloat;
const nsMargin& borderPadding = BorderPadding();
floatY = mY - borderPadding.top;
if (floatY < 0) {
// CSS2 spec, 9.5.1 rule [4]: "A floating box's outer top may not
// be higher than the top of its containing block." (Since the
// containing block is the content edge of the block box, this
// means the margin edge of the float can't be higher than the
// content edge of the block that contains it.)
floatY = 0;
}
// Place the float in the space manager
// if the float split, then take up all of the vertical height
if (NS_FRAME_IS_NOT_COMPLETE(aReflowStatus) &&
(NS_UNCONSTRAINEDSIZE != mContentArea.height)) {
floatSize.height = PR_MAX(floatSize.height, mContentArea.height - floatY);
}
nsRect region(floatX, floatY, floatSize.width, floatSize.height);
// Don't send rectangles with negative margin-box width or height to
// the space manager; it can't deal with them.
if (region.width < 0) {
// Preserve the right margin-edge for left floats and the left
// margin-edge for right floats
if (isLeftFloat) {
region.x = region.XMost();
}
region.width = 0;
}
if (region.height < 0) {
region.height = 0;
}
#ifdef DEBUG
nsresult rv =
#endif
mSpaceManager->AddRectRegion(floatFrame, region);
NS_ABORT_IF_FALSE(NS_SUCCEEDED(rv), "bad float placement");
// Save away the floats region in the spacemanager, after making
// it relative to the containing block's frame instead of relative
// to the spacemanager translation (which is inset by the
// border+padding).
// XXX Maybe RecoverFloats should calc/add in the borderPadding itself?
// It's kind of confusing to have the spacemanager translation be different
// depending on what stage of reflow we're in.
aFloatCache->mRegion = region +
nsPoint(borderPadding.left, borderPadding.top);
// If the float's dimensions have changed, note the damage in the
// space manager.
if (aFloatCache->mRegion != oldRegion) {
// XXXwaterson conservative: we could probably get away with noting
// less damage; e.g., if only height has changed, then only note the
// area into which the float has grown or from which the float has
// shrunk.
nscoord top = NS_MIN(region.y, oldRegion.y);
nscoord bottom = NS_MAX(region.YMost(), oldRegion.YMost());
mSpaceManager->IncludeInDamage(top, bottom);
}
#ifdef NOISY_SPACEMANAGER
nscoord tx, ty;
mSpaceManager->GetTranslation(tx, ty);
nsFrame::ListTag(stdout, mBlock);
printf(": FlowAndPlaceFloat: AddRectRegion: txy=%d,%d (%d,%d) {%d,%d,%d,%d}\n",
tx, ty, mSpaceManagerX, mSpaceManagerY,
aFloatCache->mRegion.x, aFloatCache->mRegion.y,
aFloatCache->mRegion.width, aFloatCache->mRegion.height);
#endif
// Calculate the actual origin of the float frame's border rect
// relative to the parent block; floatX/Y must be converted from space-manager
// coordinates to parent coordinates, and the margin must be added in
// to get the border rect
nsPoint origin(borderPadding.left + floatMargin.left + floatX,
borderPadding.top + floatMargin.top + floatY);
// If float is relatively positioned, factor that in as well
origin += floatFrame->GetRelativeOffset(floatDisplay);
// Position the float and make sure and views are properly
// positioned. We need to explicitly position its child views as
// well, since we're moving the float after flowing it.
floatFrame->SetPosition(origin);
nsContainerFrame::PositionFrameView(floatFrame);
nsContainerFrame::PositionChildViews(floatFrame);
// Update the float combined area state
nsRect combinedArea = floatFrame->GetOverflowRect() + origin;
// XXX Floats should really just get invalidated here if necessary
mFloatCombinedArea.UnionRect(combinedArea, mFloatCombinedArea);
// Now restore mY
mY = saveY;
#ifdef DEBUG
if (nsBlockFrame::gNoisyReflow) {
nsRect r = floatFrame->GetRect();
nsFrame::IndentBy(stdout, nsBlockFrame::gNoiseIndent);
printf("placed float: ");
nsFrame::ListTag(stdout, floatFrame);
printf(" %d,%d,%d,%d\n", r.x, r.y, r.width, r.height);
}
#endif
return PR_TRUE;
}
PRBool
nsBlockReflowState::CanPlaceFloat(const nsSize& aFloatSize,
PRUint8 aFloats, PRBool aForceFit)
{
// If the current Y coordinate is not impacted by any floats
// then by definition the float fits.
PRBool result = PR_TRUE;
if (0 != mBand.GetFloatCount()) {
// XXX We should allow overflow by up to half a pixel here (bug 21193).
if (mAvailSpaceRect.width < aFloatSize.width) {
// The available width is too narrow (and its been impacted by a
// prior float)
result = PR_FALSE;
}
}
if (!result)
return result;
// At this point we know that there is enough horizontal space for
// the float (somewhere). Lets see if there is enough vertical
// space.
if (NSCoordGreaterThan(aFloatSize.height, mAvailSpaceRect.height)) {
// The available height is too short. However, its possible that
// there is enough open space below which is not impacted by a
// float.
//
// Compute the X coordinate for the float based on its float
// type, assuming its placed on the current line. This is
// where the float will be placed horizontally if it can go
// here.
nscoord xa;
if (NS_STYLE_FLOAT_LEFT == aFloats) {
xa = mAvailSpaceRect.x;
}
else {
xa = mAvailSpaceRect.XMost() - aFloatSize.width;
// In case the float is too big, don't go past the left edge
// XXXldb This seems wrong, but we might want to fix bug 6976
// first.
if (xa < mAvailSpaceRect.x) {
xa = mAvailSpaceRect.x;
}
}
nscoord xb = xa + aFloatSize.width;
// Calculate the top and bottom y coordinates, again assuming
// that the float is placed on the current line.
const nsMargin& borderPadding = BorderPadding();
nscoord ya = mY - borderPadding.top;
if (ya < 0) {
// CSS2 spec, 9.5.1 rule [4]: "A floating box's outer top may not
// be higher than the top of its containing block." (Since the
// containing block is the content edge of the block box, this
// means the margin edge of the float can't be higher than the
// content edge of the block that contains it.)
ya = 0;
}
nscoord yb = ya + aFloatSize.height;
nscoord saveY = mY;
for (;;) {
// Get the available space at the new Y coordinate
if (mAvailSpaceRect.height <= 0) {
// there is no more available space. We lose.
result = PR_FALSE;
break;
}
mY += mAvailSpaceRect.height;
GetAvailableSpace(mY, aForceFit);
if (0 != mBand.GetFloatCount()) {
if ((xa < mAvailSpaceRect.x) || (xb > mAvailSpaceRect.XMost())) {
// The float can't go here.
result = PR_FALSE;
break;
}
}
// See if there is now enough height for the float.
if (yb <= mY + mAvailSpaceRect.height) {
// Winner. The bottom Y coordinate of the float is in
// this band.
break;
}
}
// Restore Y coordinate and available space information
// regardless of the outcome.
mY = saveY;
GetAvailableSpace(mY, aForceFit);
}
return result;
}
nsBlockReflowState::nsBlockReflowState(const nsHTMLReflowState& aReflowState,
nsPresContext* aPresContext,
nsBlockFrame* aFrame,
const nsHTMLReflowMetrics& aMetrics,
PRBool aTopMarginRoot,
PRBool aBottomMarginRoot,
PRBool aBlockNeedsSpaceManager)
: mBlock(aFrame),
mPresContext(aPresContext),
mReflowState(aReflowState),
mOverflowTracker(aPresContext, aFrame, PR_FALSE),
mPrevBottomMargin(),
mLineNumber(0),
mFlags(0),
mFloatBreakType(NS_STYLE_CLEAR_NONE)
{
SetFlag(BRS_ISFIRSTINFLOW, aFrame->GetPrevInFlow() == nsnull);
SetFlag(BRS_ISOVERFLOWCONTAINER,
IS_TRUE_OVERFLOW_CONTAINER(aFrame));
const nsMargin& borderPadding = BorderPadding();
if (aTopMarginRoot || 0 != aReflowState.mComputedBorderPadding.top) {
SetFlag(BRS_ISTOPMARGINROOT, PR_TRUE);
}
if (aBottomMarginRoot || 0 != aReflowState.mComputedBorderPadding.bottom) {
SetFlag(BRS_ISBOTTOMMARGINROOT, PR_TRUE);
}
if (GetFlag(BRS_ISTOPMARGINROOT)) {
SetFlag(BRS_APPLYTOPMARGIN, PR_TRUE);
}
if (aBlockNeedsSpaceManager) {
SetFlag(BRS_SPACE_MGR, PR_TRUE);
}
mSpaceManager = aReflowState.mSpaceManager;
NS_ASSERTION(mSpaceManager,
"SpaceManager should be set in nsBlockReflowState" );
if (mSpaceManager) {
// Translate into our content area and then save the
// coordinate system origin for later.
mSpaceManager->Translate(borderPadding.left, borderPadding.top);
mSpaceManager->GetTranslation(mSpaceManagerX, mSpaceManagerY);
}
mReflowStatus = NS_FRAME_COMPLETE;
mPresContext = aPresContext;
mNextInFlow = static_cast<nsBlockFrame*>(mBlock->GetNextInFlow());
NS_ASSERTION(NS_UNCONSTRAINEDSIZE != aReflowState.ComputedWidth(),
"no unconstrained widths should be present anymore");
mContentArea.width = aReflowState.ComputedWidth();
// Compute content area height. Unlike the width, if we have a
// specified style height we ignore it since extra content is
// managed by the "overflow" property. When we don't have a
// specified style height then we may end up limiting our height if
// the availableHeight is constrained (this situation occurs when we
// are paginated).
if (NS_UNCONSTRAINEDSIZE != aReflowState.availableHeight) {
// We are in a paginated situation. The bottom edge is just inside
// the bottom border and padding. The content area height doesn't
// include either border or padding edge.
mBottomEdge = aReflowState.availableHeight - borderPadding.bottom;
mContentArea.height = PR_MAX(0, mBottomEdge - borderPadding.top);
}
else {
// When we are not in a paginated situation then we always use
// an constrained height.
SetFlag(BRS_UNCONSTRAINEDHEIGHT, PR_TRUE);
mContentArea.height = mBottomEdge = NS_UNCONSTRAINEDSIZE;
}
mY = borderPadding.top;
mBand.Init(mSpaceManager, mContentArea);
mPrevChild = nsnull;
mCurrentLine = aFrame->end_lines();
mMinLineHeight = nsHTMLReflowState::CalcLineHeight(aReflowState.rendContext,
aReflowState.frame);
// Calculate mOutsideBulletX
GetAvailableSpace();
// FIXME (bug 25888): need to check the entire region that the first
// line overlaps, not just the top pixel.
mOutsideBulletX =
mReflowState.mStyleVisibility->mDirection == NS_STYLE_DIRECTION_LTR ?
mAvailSpaceRect.x :
PR_MIN(mReflowState.ComputedWidth(), mAvailSpaceRect.XMost()) +
mReflowState.mComputedBorderPadding.LeftRight();
}
// XXXldb This behavior doesn't quite fit with CSS1 and CSS2 --
// technically we're supposed let the current line flow around the
// float as well unless it won't fit next to what we already have.
// But nobody else implements it that way...
PRBool
nsBlockReflowState::AddFloat(nsLineLayout& aLineLayout,
nsPlaceholderFrame* aPlaceholder,
PRBool aInitialReflow,
nsReflowStatus& aReflowStatus)
{
NS_PRECONDITION(mBlock->end_lines() != mCurrentLine, "null ptr");
aReflowStatus = NS_FRAME_COMPLETE;
// Allocate a nsFloatCache for the float
nsFloatCache* fc = mFloatCacheFreeList.Alloc();
fc->mPlaceholder = aPlaceholder;
PRBool placed;
// Now place the float immediately if possible. Otherwise stash it
// away in mPendingFloats and place it later.
if (aLineLayout.CanPlaceFloatNow()) {
// Because we are in the middle of reflowing a placeholder frame
// within a line (and possibly nested in an inline frame or two
// that's a child of our block) we need to restore the space
// manager's translation to the space that the block resides in
// before placing the float.
nscoord ox, oy;
mSpaceManager->GetTranslation(ox, oy);
nscoord dx = ox - mSpaceManagerX;
nscoord dy = oy - mSpaceManagerY;
mSpaceManager->Translate(-dx, -dy);
// And then place it
PRBool isLeftFloat;
// force it to fit if we're at the top of the block and we can't
// break before this
PRBool forceFit = IsAdjacentWithTop() && !aLineLayout.LineIsBreakable();
placed = FlowAndPlaceFloat(fc, &isLeftFloat, aReflowStatus, forceFit);
NS_ASSERTION(placed || !forceFit,
"If we asked for force-fit, it should have been placed");
if (forceFit || (placed && !NS_FRAME_IS_TRUNCATED(aReflowStatus))) {
// Pass on updated available space to the current inline reflow engine
GetAvailableSpace(mY, forceFit);
aLineLayout.UpdateBand(mAvailSpaceRect.x + BorderPadding().left, mY,
mAvailSpaceRect.width,
mAvailSpaceRect.height,
isLeftFloat,
aPlaceholder->GetOutOfFlowFrame());
// Record this float in the current-line list
mCurrentLineFloats.Append(fc);
// If we can't break here, hide the fact that it's truncated
// XXX We can probably do this more cleanly
aReflowStatus &= ~NS_FRAME_TRUNCATED;
}
else {
if (IsAdjacentWithTop()) {
// Pushing the line to the next page won't give us any more space;
// therefore, we break.
NS_ASSERTION(aLineLayout.LineIsBreakable(),
"We can't get here unless forceFit is false");
aReflowStatus = NS_INLINE_LINE_BREAK_BEFORE();
} else {
// Make sure we propagate the truncated status; this signals the
// block to push the line to the next page.
aReflowStatus |= NS_FRAME_TRUNCATED;
}
delete fc;
}
// Restore coordinate system
mSpaceManager->Translate(dx, dy);
}
else {
// Always claim to be placed; we don't know whether we fit yet, so we
// deal with this in PlaceBelowCurrentLineFloats
placed = PR_TRUE;
// This float will be placed after the line is done (it is a
// below-current-line float).
mBelowCurrentLineFloats.Append(fc);
if (aPlaceholder->GetNextInFlow()) {
// If the float might not be complete, mark it incomplete now to
// prevent its next-in-flow placeholders being torn down. We will destroy any
// placeholders later if PlaceBelowCurrentLineFloats finds the
// float is complete.
// Note that we could have unconstrained height and yet have
// a next-in-flow placeholder --- for example columns can switch
// from constrained height to unconstrained height.
if (aPlaceholder->GetSplittableType() != NS_FRAME_NOT_SPLITTABLE) {
aReflowStatus = NS_FRAME_NOT_COMPLETE;
}
}
}
return placed;
}
nscoord
nsBlockReflowState::ClearFloats(nscoord aY, PRUint8 aBreakType,
nsIFrame *aReplacedBlock)
{
#ifdef DEBUG
if (nsBlockFrame::gNoisyReflow) {
nsFrame::IndentBy(stdout, nsBlockFrame::gNoiseIndent);
printf("clear floats: in: aY=%d(%d)\n",
aY, aY - BorderPadding().top);
}
#endif
#ifdef NOISY_FLOAT_CLEARING
printf("nsBlockReflowState::ClearFloats: aY=%d breakType=%d\n",
aY, aBreakType);
mSpaceManager->List(stdout);
#endif
const nsMargin& bp = BorderPadding();
nscoord newY = aY;
if (aBreakType != NS_STYLE_CLEAR_NONE) {
newY = bp.top + mSpaceManager->ClearFloats(newY - bp.top, aBreakType);
}
if (aReplacedBlock) {
for (;;) {
GetAvailableSpace(newY, PR_FALSE);
nsBlockFrame::ReplacedElementWidthToClear replacedWidth =
nsBlockFrame::WidthToClearPastFloats(*this, aReplacedBlock);
if (mBand.GetFloatCount() == 0 ||
PR_MAX(mAvailSpaceRect.x, replacedWidth.marginLeft) +
replacedWidth.borderBoxWidth +
PR_MAX(mContentArea.width -
PR_MIN(mContentArea.width, mAvailSpaceRect.XMost()),
replacedWidth.marginRight) <=
mContentArea.width) {
break;
}
// See the analogous code for inlines in nsBlockFrame::DoReflowInlineFrames
if (mAvailSpaceRect.height > 0) {
// See if there's room in the next band.
newY += mAvailSpaceRect.height;
} else {
if (mReflowState.availableHeight != NS_UNCONSTRAINEDSIZE) {
// Stop trying to clear here; we'll just get pushed to the
// next column or page and try again there.
break;
}
NS_NOTREACHED("avail space rect with zero height!");
newY += 1;
}
}
// Restore mBand and mAvailSpaceRect to the way they were. This may
// well not be needed, and we should probably come up with
// well-defined rules about when these members are valid so that
// it's clearly not needed.
GetAvailableSpace();
}
#ifdef DEBUG
if (nsBlockFrame::gNoisyReflow) {
nsFrame::IndentBy(stdout, nsBlockFrame::gNoiseIndent);
printf("clear floats: out: y=%d(%d)\n", newY, newY - bp.top);
}
#endif
return newY;
}
