/**
* @brief Initialize the I2C registers according to the specified parameters in I2C_InitStruct.
* @param I2Cx I2C Instance.
* @param I2C_InitStruct pointer to a @ref LL_I2C_InitTypeDef structure.
* @retval An ErrorStatus enumeration value:
* - SUCCESS: I2C registers are initialized
* - ERROR: Not applicable
*/
uint32_t LL_I2C_Init(I2C_TypeDef *I2Cx, LL_I2C_InitTypeDef *I2C_InitStruct)
{
/* Check the I2C Instance I2Cx */
assert_param(IS_I2C_ALL_INSTANCE(I2Cx));
/* Check the I2C parameters from I2C_InitStruct */
assert_param(IS_LL_I2C_PERIPHERAL_MODE(I2C_InitStruct->PeripheralMode));
assert_param(IS_LL_I2C_ANALOG_FILTER(I2C_InitStruct->AnalogFilter));
assert_param(IS_LL_I2C_DIGITAL_FILTER(I2C_InitStruct->DigitalFilter));
assert_param(IS_LL_I2C_OWN_ADDRESS1(I2C_InitStruct->OwnAddress1));
assert_param(IS_LL_I2C_TYPE_ACKNOWLEDGE(I2C_InitStruct->TypeAcknowledge));
assert_param(IS_LL_I2C_OWN_ADDRSIZE(I2C_InitStruct->OwnAddrSize));
/* Disable the selected I2Cx Peripheral */
LL_I2C_Disable(I2Cx);
/*---------------------------- I2Cx CR1 Configuration ------------------------
* Configure the analog and digital noise filters with parameters :
* - AnalogFilter: I2C_CR1_ANFOFF bit
* - DigitalFilter: I2C_CR1_DNF[3:0] bits
*/
LL_I2C_ConfigFilters(I2Cx, I2C_InitStruct->AnalogFilter, I2C_InitStruct->DigitalFilter);
/*---------------------------- I2Cx TIMINGR Configuration --------------------
* Configure the SDA setup, hold time and the SCL high, low period with parameter :
* - Timing: I2C_TIMINGR_PRESC[3:0], I2C_TIMINGR_SCLDEL[3:0], I2C_TIMINGR_SDADEL[3:0],
* I2C_TIMINGR_SCLH[7:0] and I2C_TIMINGR_SCLL[7:0] bits
*/
LL_I2C_SetTiming(I2Cx, I2C_InitStruct->Timing);
/* Enable the selected I2Cx Peripheral */
LL_I2C_Enable(I2Cx);
/*---------------------------- I2Cx OAR1 Configuration -----------------------
* Disable, Configure and Enable I2Cx device own address 1 with parameters :
* - OwnAddress1: I2C_OAR1_OA1[9:0] bits
* - OwnAddrSize: I2C_OAR1_OA1MODE bit
*/
LL_I2C_DisableOwnAddress1(I2Cx);
LL_I2C_SetOwnAddress1(I2Cx, I2C_InitStruct->OwnAddress1, I2C_InitStruct->OwnAddrSize);
LL_I2C_EnableOwnAddress1(I2Cx);
/*---------------------------- I2Cx MODE Configuration -----------------------
* Configure I2Cx peripheral mode with parameter :
* - PeripheralMode: I2C_CR1_SMBDEN and I2C_CR1_SMBHEN bits
*/
LL_I2C_SetMode(I2Cx, I2C_InitStruct->PeripheralMode);
/*---------------------------- I2Cx CR2 Configuration ------------------------
* Configure the ACKnowledge or Non ACKnowledge condition
* after the address receive match code or next received byte with parameter :
* - TypeAcknowledge: I2C_CR2_NACK bit
*/
LL_I2C_AcknowledgeNextData(I2Cx, I2C_InitStruct->TypeAcknowledge);
return SUCCESS;
}
/**
* @brief Initialize the I2C registers according to the specified parameters in I2C_InitStruct.
* @param I2Cx I2C Instance.
* @param I2C_InitStruct pointer to a @ref LL_I2C_InitTypeDef structure.
* @retval An ErrorStatus enumeration value:
* - SUCCESS: I2C registers are initialized
* - ERROR: Not applicable
*/
uint32_t LL_I2C_Init(I2C_TypeDef *I2Cx, LL_I2C_InitTypeDef *I2C_InitStruct)
{
LL_RCC_ClocksTypeDef rcc_clocks;
/* Check the I2C Instance I2Cx */
assert_param(IS_I2C_ALL_INSTANCE(I2Cx));
/* Check the I2C parameters from I2C_InitStruct */
assert_param(IS_LL_I2C_PERIPHERAL_MODE(I2C_InitStruct->PeripheralMode));
assert_param(IS_LL_I2C_CLOCK_SPEED(I2C_InitStruct->ClockSpeed));
assert_param(IS_LL_I2C_DUTY_CYCLE(I2C_InitStruct->DutyCycle));
assert_param(IS_LL_I2C_OWN_ADDRESS1(I2C_InitStruct->OwnAddress1));
assert_param(IS_LL_I2C_TYPE_ACKNOWLEDGE(I2C_InitStruct->TypeAcknowledge));
assert_param(IS_LL_I2C_OWN_ADDRSIZE(I2C_InitStruct->OwnAddrSize));
/* Disable the selected I2Cx Peripheral */
LL_I2C_Disable(I2Cx);
/* Retrieve Clock frequencies */
LL_RCC_GetSystemClocksFreq(&rcc_clocks);
/*---------------------------- I2Cx SCL Clock Speed Configuration ------------
* Configure the SCL speed :
* - ClockSpeed: I2C_CR2_FREQ[5:0], I2C_TRISE_TRISE[5:0], I2C_CCR_FS,
* and I2C_CCR_CCR[11:0] bits
* - DutyCycle: I2C_CCR_DUTY[7:0] bits
*/
LL_I2C_ConfigSpeed(I2Cx, rcc_clocks.PCLK1_Frequency, I2C_InitStruct->ClockSpeed, I2C_InitStruct->DutyCycle);
/*---------------------------- I2Cx OAR1 Configuration -----------------------
* Disable, Configure and Enable I2Cx device own address 1 with parameters :
* - OwnAddress1: I2C_OAR1_ADD[9:8], I2C_OAR1_ADD[7:1] and I2C_OAR1_ADD0 bits
* - OwnAddrSize: I2C_OAR1_ADDMODE bit
*/
LL_I2C_SetOwnAddress1(I2Cx, I2C_InitStruct->OwnAddress1, I2C_InitStruct->OwnAddrSize);
/*---------------------------- I2Cx MODE Configuration -----------------------
* Configure I2Cx peripheral mode with parameter :
* - PeripheralMode: I2C_CR1_SMBUS, I2C_CR1_SMBTYPE and I2C_CR1_ENARP bits
*/
LL_I2C_SetMode(I2Cx, I2C_InitStruct->PeripheralMode);
/* Enable the selected I2Cx Peripheral */
LL_I2C_Enable(I2Cx);
/*---------------------------- I2Cx CR2 Configuration ------------------------
* Configure the ACKnowledge or Non ACKnowledge condition
* after the address receive match code or next received byte with parameter :
* - TypeAcknowledge: I2C_CR2_NACK bit
*/
LL_I2C_AcknowledgeNextData(I2Cx, I2C_InitStruct->TypeAcknowledge);
return SUCCESS;
}