uint32_t UART_Init(UART_TypeDef *UARTx, UART_InitTypeDef* UART_InitStruct)
{
float baud_divisor;
uint32_t tmpreg=0x00, uartclock=0x00;
uint32_t integer_baud = 0x00, fractional_baud = 0x00;
assert_param(IS_UART_01_PERIPH(UARTx));
assert_param(IS_UART_WORD_LENGTH(UART_InitStruct->UART_WordLength));
assert_param(IS_UART_PARITY(UART_InitStruct->UART_Parity));
assert_param(IS_UART_STOPBITS(UART_InitStruct->UART_StopBits));
assert_param(IS_UART_HARDWARE_FLOW_CONTROL(UART_InitStruct->UART_HardwareFlowControl));
assert_param(IS_UART_MODE(UART_InitStruct->UART_Mode));
UARTx->CR &= ~(UART_CR_UARTEN);
// Set baudrate
CRG->UARTCLK_SSR = CRG_UARTCLK_SSR_RCLK; // Set UART Clock using internal Oscilator ( 8MHz )
//CRG->UARTCLK_SSR = CRG_UARTCLK_SSR_OCLK; // Set UART Clock using external Oscilator
uartclock = (8000000UL) / (1 << CRG->UARTCLK_PVSR);
baud_divisor = ((float)uartclock / (16 * UART_InitStruct->UART_BaudRate));
integer_baud = (uint32_t)baud_divisor;
fractional_baud = (uint32_t)((baud_divisor - integer_baud) * 64 + 0.5);
UARTx->IBRD = integer_baud;
UARTx->FBRD = fractional_baud;
tmpreg = UARTx->LCR_H;
tmpreg &= ~(0x00EE);
tmpreg |= (UART_InitStruct->UART_WordLength | UART_InitStruct->UART_StopBits | UART_InitStruct->UART_Parity);
UARTx->LCR_H |= tmpreg;
tmpreg = UARTx->CR;
tmpreg &= ~(UART_CR_CTSEn | UART_CR_RTSEn | UART_CR_RXE | UART_CR_TXE | UART_CR_UARTEN);
tmpreg |= (UART_InitStruct->UART_Mode | UART_InitStruct->UART_HardwareFlowControl);
UARTx->CR |= tmpreg;
UARTx->CR |= UART_CR_UARTEN;
return 0;
}
/** @brief: set registers acc to info in huart
* @details: used in HAL_UART3Debug_Init, private
****************************************************************/
static void MyUARTSetConfig(UART_HandleTypeDef * huart) {
uint32_t tmpreg = 0x00;
/* Check the parameters */
assert_param(IS_UART_BAUDRATE(huart->Init.BaudRate));
assert_param(IS_UART_STOPBITS(huart->Init.StopBits));
assert_param(IS_UART_PARITY(huart->Init.Parity));
assert_param(IS_UART_MODE(huart->Init.Mode));
/*------- UART-associated USART registers setting : CR2 Configuration ------*/
/* Configure the UART Stop Bits: Set STOP[13:12] bits according
* to huart->Init.StopBits value */
MODIFY_REG(huart->Instance->CR2, USART_CR2_STOP, huart->Init.StopBits);
/*------- UART-associated USART registers setting : CR1 Configuration ------*/
/* Configure the UART Word Length, Parity and mode:
Set the M bits according to huart->Init.WordLength value
Set PCE and PS bits according to huart->Init.Parity value
Set TE and RE bits according to huart->Init.Mode value */
tmpreg = (uint32_t) huart->Init.WordLength | huart->Init.Parity
| huart->Init.Mode;
MODIFY_REG(huart->Instance->CR1,
(uint32_t)(USART_CR1_M | USART_CR1_PCE | USART_CR1_PS | USART_CR1_TE | USART_CR1_RE),
tmpreg);
/*------- UART-associated USART registers setting : CR3 Configuration ------*/
/* Configure the UART HFC: Set CTSE and RTSE bits according to huart->Init.HwFlowCtl value */
MODIFY_REG(huart->Instance->CR3, (USART_CR3_RTSE | USART_CR3_CTSE),
huart->Init.HwFlowCtl);
/*------- UART-associated USART registers setting : BRR Configuration ------*/
if ((huart->Instance == USART1)) {
huart->Instance->BRR = UART_BRR_SAMPLING16(HAL_RCC_GetPCLK2Freq(),
huart->Init.BaudRate);
} else {
huart->Instance->BRR = UART_BRR_SAMPLING16(HAL_RCC_GetPCLK1Freq(),
huart->Init.BaudRate);
}
}
void S_UART_SetBaud(uint32_t baud)
{
uint32_t uartclock = 0x00, integer_baud = 0x00;
assert_param(IS_UART_MODE(S_UART_InitStruct->UART_Mode));
if(CRG->FCLK_SSR == CRG_FCLK_SSR_RCLK)
{
uartclock = INTERN_XTAL;
}
else if(CRG->FCLK_SSR == CRG_FCLK_SSR_OCLK)
{
uartclock = EXTERN_XTAL;
}
else
{
uartclock = GetSystemClock();
}
integer_baud = (uint32_t)(uartclock / baud);
UART2->BAUDDIV = integer_baud;
}
/** @brief: set registers acc to info in huart
* @details: used in HAL_UART3Debug_Init, private
****************************************************************/
static void MyUARTSetConfig(UART_HandleTypeDef *huart) {
uint32_t tmpreg = 0x00;
/* Check the parameters */
assert_param(IS_UART_BAUDRATE(huart->Init.BaudRate));
assert_param(IS_UART_STOPBITS(huart->Init.StopBits));
assert_param(IS_UART_PARITY(huart->Init.Parity));
assert_param(IS_UART_MODE(huart->Init.Mode));
/*-------------------------- USART CR2 Configuration -----------------------*/
tmpreg = huart->Instance->CR2;
/* Clear STOP[13:12] bits */
tmpreg &= (uint32_t) ~((uint32_t) USART_CR2_STOP);
/* Configure the UART Stop Bits: Set STOP[13:12] bits according to huart->Init.StopBits value */
tmpreg |= (uint32_t) huart->Init.StopBits;
/* Write to USART CR2 */
huart->Instance->CR2 = (uint32_t) tmpreg;
/*-------------------------- USART CR1 Configuration -----------------------*/
tmpreg = huart->Instance->CR1;
/* Clear M, PCE, PS, TE and RE bits */
tmpreg &= (uint32_t) ~((uint32_t) (USART_CR1_M | USART_CR1_PCE
| USART_CR1_PS | USART_CR1_TE | USART_CR1_RE | USART_CR1_OVER8));
/* Configure the UART Word Length, Parity and mode:
Set the M bits according to huart->Init.WordLength value
Set PCE and PS bits according to huart->Init.Parity value
Set TE and RE bits according to huart->Init.Mode value
Set OVER8 bit according to huart->Init.OverSampling value */
tmpreg |= (uint32_t) huart->Init.WordLength | huart->Init.Parity
| huart->Init.Mode | huart->Init.OverSampling;
/* Write to USART CR1 */
huart->Instance->CR1 = (uint32_t) tmpreg;
/*-------------------------- USART CR3 Configuration -----------------------*/
tmpreg = huart->Instance->CR3;
/* Clear CTSE and RTSE bits */
tmpreg &= (uint32_t) ~((uint32_t) (USART_CR3_RTSE | USART_CR3_CTSE));
/* Configure the UART HFC: Set CTSE and RTSE bits according to huart->Init.HwFlowCtl value */
tmpreg |= huart->Init.HwFlowCtl;
/* Write to USART CR3 */
huart->Instance->CR3 = (uint32_t) tmpreg;
/* Check the Over Sampling */
if (huart->Init.OverSampling == UART_OVERSAMPLING_8) {
/*-------------------------- USART BRR Configuration ---------------------*/
if ((huart->Instance == USART1) || (huart->Instance == USART6)) {
huart->Instance->BRR = UART_DIV_SAMPLING8(HAL_RCC_GetPCLK2Freq(),
huart->Init.BaudRate);
} else {
huart->Instance->BRR = UART_DIV_SAMPLING8(HAL_RCC_GetPCLK1Freq(),
huart->Init.BaudRate);
}
} else {
/*-------------------------- USART BRR Configuration ---------------------*/
if ((huart->Instance == USART1) || (huart->Instance == USART6)) {
huart->Instance->BRR = UART_DIV_SAMPLING16(HAL_RCC_GetPCLK2Freq(),
huart->Init.BaudRate);
} else {
huart->Instance->BRR = UART_DIV_SAMPLING16(HAL_RCC_GetPCLK1Freq(),
huart->Init.BaudRate);
}
}
}
