void memory_c::push_dram_sch_queue()
{
if(dram_in_queue.empty()) return;
list<mem_req_s *>::iterator cii;
for(cii=dram_in_queue.begin();cii!=dram_in_queue.end();)
{
mem_req_s* ii = (*cii);
// cout << "\nPUSHING IN DRAM ";
if((ii)->m_state == MEM_DRAM_IN){
// (ii)->m_state = MEM_DRAM_SCH;
//mem_req_s* temp = (ii);//get_new_mem_request();
//insert temp into dram back;
int temp = (ii)->m_addr/((KNOB(KNOB_DRAM_PAGE_SIZE))->getValue()*1024);
int bank_id = temp%(KNOB(KNOB_DRAM_BANK_NUM)->getValue());
//mem_req_s *temp = (ii);
dram_bank_sch_queue[bank_id].push_back(ii);
cii = dram_in_queue.erase(cii);
break;
}
else{
cii++;
continue;}
}
/* For Lab #2, you need to fill out this function */
}
bool run_a_cycle(){
int i = 0;
for (;;) {
if (((KNOB(KNOB_MAX_SIM_COUNT)->getValue() && (cycle_count >= KNOB(KNOB_MAX_SIM_COUNT)->getValue())) || (KNOB(KNOB_MAX_INST_COUNT)->getValue() && (retired_instruction >= KNOB(KNOB_MAX_INST_COUNT)->getValue())) || (sim_end_condition)))
{
// please complete sim_end_condition
// finish the simulation
print_heartbeat();
print_stats();
return TRUE;
}
cycle_count++;
if (!(cycle_count%5000))
{
print_heartbeat();
}
WB_stage();
MEM_stage();
EX_stage();
ID_stage();
FE_stage();
if (KNOB(KNOB_PRINT_PIPE_FREQ)->getValue() && !(cycle_count%KNOB(KNOB_PRINT_PIPE_FREQ)->getValue())) print_pipeline();
}
return TRUE;
}
void init_structures(memory_c *main_memory) // please modify init_structures function argument /** NEW-LAB2 */
{
init_op_pool();
init_op_latency();
init_latches();
init_registers(); // initializing processor registers to TRUE since no data dependency when processor is powered on
main_memory->init_mem(); // initializing DRAM and MSHR
cache_init(data_cache, KNOB(KNOB_DCACHE_SIZE)->getValue(), KNOB(KNOB_BLOCK_SIZE)->getValue(), KNOB(KNOB_DCACHE_WAY)->getValue(), "L1 Cache"); // initializing cache
}
void init_structures(memory_c *main_memory) // please modify init_structures function argument /** NEW-LAB2 */
{
init_op_pool();
init_op_latency();
/* please initialize other data stucturs */
/* you must complete the function */
init_latches();
init_register_file(); //fn added by apkarande
main_memory->init_mem(); //initialize main memory
cache_init(data_cache,KNOB(KNOB_DCACHE_SIZE)->getValue(),KNOB(KNOB_BLOCK_SIZE)->getValue(),KNOB(KNOB_DCACHE_WAY)->getValue(),"L1 dcache"); //initialize data cache
}
int get_dram_bank_id(ADDRINT addr) // NEW-LAB2
{
// NEW-LAB2
// NEW-LAB2
/* utility functions that you might want to implement */ // NEW-LAB2
/* if you want to use it, you should find the right math! */ // NEW-LAB2
return (((addr)/((KNOB(KNOB_DRAM_PAGE_SIZE)->getValue()) * 1024)) % (KNOB(KNOB_DRAM_BANK_NUM)->getValue()));
// (addr >> 6); // NEW-LAB2
// return 1; // NEW-LAB2
} // NEW-LAB2
void memory_c::dram_schedule()
{
// Traverse all entries in all the dram_bank_sch_queues.
// If there is an unscheduled memory request, check the corresponding DRAM bank and see whether the DRAM bank is available.
// If the corresponding bank is idle, check the last row buffer number.
// If the memory request has the same row id, its a row buffer hit. So, you set req->m_rdy_cycle = cycle_count + KNOB_MEM_LATENCY_ROW_HIT
// Else if row buffer miss, you set req->m_rdy_cycle = cycle_count + KNOB_MEM_LATENCY_ROW_MISS, and also set row buffer id as the row id of the memory request.
// You also set dram_bank_rdy_cycle = req->m_rdy_cycle;
int req_dram_row_id;
list<mem_req_s *>::const_iterator cii;
for(int i=0;i<m_dram_bank_num;i++)
{
if(dram_bank_sch_queue[i].empty())
continue;
for (cii= dram_bank_sch_queue[i].begin() ; cii != dram_bank_sch_queue[i].end(); cii++)
{
mem_req_s* m_req = (*cii);
if(m_req->m_state==MEM_DRAM_SCH) // unscheduled memory request waiting to be scheduled
{
if (dram_bank_rdy_cycle[i] < cycle_count) // DRAM bank output is available in row buffer
{
req_dram_row_id=get_dram_row_id(m_req->m_addr);
if(dram_bank_open_row[i]==req_dram_row_id) // ASK: is this right way of comparing??? row buffer hit
{
m_req->m_rdy_cycle = cycle_count + KNOB(KNOB_MEM_LATENCY_ROW_HIT)->getValue();
dram_row_buffer_hit_count++;
}
else
{
dram_row_buffer_miss_count++;
m_req->m_rdy_cycle = cycle_count + KNOB(KNOB_MEM_LATENCY_ROW_MISS)->getValue();
}
dram_bank_open_row[i]=req_dram_row_id;
dram_bank_rdy_cycle[i] = m_req->m_rdy_cycle;
m_req->m_state=MEM_DRAM_DONE;
break; // since only 1 mem request in a particular bank can be scheduled
}
else
break; // dont iterate through the rest of the mem requests since cycle_count is < dram_bank_rdy_cycle[i] for all of them.
}
}
}
}
int get_dram_bank_id(ADDRINT addr) // NEW-LAB2
{ // NEW-LAB2
// (addr >> 6); // NEW-LAB2
int dram_page_size,dram_bank_num,dram_bank_id;
dram_page_size = KNOB(KNOB_DRAM_PAGE_SIZE)->getValue();
dram_bank_num = KNOB(KNOB_DRAM_BANK_NUM)->getValue();
dram_bank_id=(addr/(dram_page_size*1024))%dram_bank_num;
return dram_bank_id;
//return 1; // NEW-LAB2
} // NEW-LAB2
bool get_op(Op *op)
{
static UINT64 unique_count = 0;
Trace_op trace_op;
bool success = FALSE;
// read trace
// fill out op info
// return FALSE if the end of trace
//success = (gzread(g_stream, &trace_op, sizeof(Trace_op)) >0 );
success = (gzread(g_stream, &trace_op, sizeof(Trace_op)) == sizeof(Trace_op));
/* copy trace structure to op */
if (success) {
if (KNOB(KNOB_PRINT_INST)->getValue()) dprint_trace(&trace_op);
copy_trace_op(&trace_op, op);
op->inst_id = unique_count++;
op->valid = TRUE;
last_inst_id = op->inst_id + 1;
}
else
{
if(unique_count == 0)
{
//cout << "Error in trace file" << endl;
exit(0);
}
//last_inst_id = unique_count - 1;
trace_over = true;
}
return success;
}
void memory_c::run_a_cycle()
{
if (KNOB(KNOB_PRINT_MEM_DEBUG)->getValue()) {
dprint_queues();
dprint_dram_banks();
}
/* This function is called from run_a_cycle() every cycle */
/* You do not add new code here */
/* insert D-cache/I-cache (D-cache for only Lab #2) and wakes up instructions */
fill_queue();
/* move memory requests from dram to cache and MSHR*/ /* out queue */
send_bus_out_queue();
/* memory requests are scheduled */
dram_schedule();
/* memory requests are moved from bus_queue to DRAM scheduler */
push_dram_sch_queue();
/* new memory requests send from MSRH to in_bus_queue */
send_bus_in_queue();
}
bool icache_access(uint32_t addr) {
/* For Lab #1, you assume that all I-cache hit */
bool hit = FALSE;
if (KNOB(KNOB_PERFECT_ICACHE)->getValue()) hit = TRUE;
return hit;
}
bool icache_access(ADDRINT addr) { /** please change uint32_t to ADDRINT NEW-LAB2 */
/* For Lab #1, you assume that all I-cache hit */
bool hit = FALSE;
if (KNOB(KNOB_PERFECT_ICACHE)->getValue()) hit = TRUE;
return hit;
}
void memory_c::init_mem()
{
/* For Lab #2, you do not need to modify this code */
/* you can add other code here if you want */
/* init mshr */
m_mshr_size = KNOB(KNOB_MSHR_SIZE)->getValue();
m_dram_bank_num = KNOB(KNOB_DRAM_BANK_NUM)->getValue();
m_block_size = KNOB(KNOB_BLOCK_SIZE)->getValue();
for (int ii = 0 ; ii < m_mshr_size; ii++)
{
m_mshr_entry_s* entry = new m_mshr_entry_s;
entry->m_mem_req = new mem_req_s; // create a memory rquest data structure here
entry->valid = false;
entry->insert_time = 0;
m_mshr_free_list.push_back(entry);
}
/* init DRAM scheduler queues */
dram_in_queue.clear();
dram_out_queue.clear();
//cout << "SIZE OF DRAM IN AND OUT" << dram_in_queue.size() << dram_out_queue.size();
// cout << "INIT MEM\n";
dram_bank_sch_queue = new list<mem_req_s*>[m_dram_bank_num];
dram_bank_open_row = new int64_t[m_dram_bank_num];
dram_bank_rdy_cycle = new uint64_t[m_dram_bank_num];
for(int ii=0;ii<m_dram_bank_num;ii++)
{
dram_bank_open_row[ii] = -1;
dram_bank_rdy_cycle[ii] = 0;
}
//dram_bank_rdy_cycle[i] = -1;
}
void memory_c::dram_schedule()
{
/* For Lab #2, you need to fill out this function */
list<mem_req_s *>::const_iterator cii;
/* if the in queue is empty, return */
// if(dram_in_queue.empty())
// return;
/* iterate over dram_bank_sch_queue to get elements */
for(int bank_id = 0 ; bank_id < m_dram_bank_num ; bank_id++)
{
if(dram_bank_sch_queue[bank_id].empty())
continue;
for(cii = dram_bank_sch_queue[bank_id].begin() ; cii != dram_bank_sch_queue[bank_id].end() ; cii++)
{
mem_req_s *req = (*cii);
if(req && (req->m_state == MEM_DRAM_SCH) && (dram_bank_rdy_cycle[bank_id] < cycle_count))
{
/* bank is available. we can schedule it */
/* check for row buffer hit */
int64_t reqd_row_id = get_dram_row_id(req->m_addr);
// int reqd_row_id = ((req->m_addr)/((KNOB(KNOB_DRAM_PAGE_SIZE)->getValue())*1024));
if(reqd_row_id == dram_bank_open_row[bank_id])
{
/* row buffer hit */
req->m_rdy_cycle = cycle_count + (KNOB(KNOB_MEM_LATENCY_ROW_HIT)->getValue());
dram_row_buffer_hit_count++;
}
else
{
/* row buffer miss */
req->m_rdy_cycle = cycle_count + (KNOB(KNOB_MEM_LATENCY_ROW_MISS)->getValue());
dram_bank_open_row[bank_id] = reqd_row_id;
dram_row_buffer_miss_count++;
}
dram_bank_rdy_cycle[bank_id] = req->m_rdy_cycle;
req->m_state = MEM_DRAM_DONE;
break;
}
}
}
}
bool dcache_access(ADDRINT addr) { /** please change uint32_t to ADDRINT NEW-LAB2 */
/* For Lab #1, you assume that all D-cache hit */
/* For Lab #2, you need to connect cache here */ // NEW-LAB2
bool hit = FALSE;
if (KNOB(KNOB_PERFECT_DCACHE)->getValue()) hit = TRUE;
else
{
hit=cache_access(data_cache,addr);
}
return hit;
}
int64_t get_dram_row_id(ADDRINT addr) // NEW-LAB2
{ // NEW-LAB2
// NEW-LAB2
/* utility functions that you might want to implement */ // NEW-LAB2
/* if you want to use it, you should find the right math! */ // NEW-LAB2
/* pleaes carefull with that DRAM_PAGE_SIZE UNIT !!! */ // NEW-LAB2
// addr >> 6; // NEW-LAB2
return ((addr)/((KNOB(KNOB_DRAM_PAGE_SIZE)->getValue())*1024));
// return 2; // NEW-LAB2
} // NEW-LAB2
void read_trace_file(void) {
g_stream[0] = gzopen((KNOB(KNOB_TRACE_FILE)->getValue()).c_str(), "r");
if ((KNOB(KNOB_RUN_THREAD_NUM)->getValue())<2) return; /** NEW-LAB4 **/
g_stream[1] = gzopen((KNOB(KNOB_TRACE_FILE2)->getValue()).c_str(), "r"); /** NEW-LAB4 **/
if ((KNOB(KNOB_RUN_THREAD_NUM)->getValue())<3) return; /** NEW-LAB4 **/
g_stream[2] = gzopen((KNOB(KNOB_TRACE_FILE3)->getValue()).c_str(), "r"); /** NEW-LAB4 **/
if ((KNOB(KNOB_RUN_THREAD_NUM)->getValue())<4) return; /** NEW-LAB4 **/
g_stream[3] = gzopen((KNOB(KNOB_TRACE_FILE4)->getValue()).c_str(), "r"); /** NEW-LAB4 **/
}
bool run_a_cycle(memory_c *main_memory){ // please modify run_a_cycle function argument /** NEW-LAB2 */
int i = 0;
for (;;) {
if (((KNOB(KNOB_MAX_SIM_COUNT)->getValue() && (cycle_count >= KNOB(KNOB_MAX_SIM_COUNT)->getValue())) ||
(KNOB(KNOB_MAX_INST_COUNT)->getValue() && (retired_instruction >= KNOB(KNOB_MAX_INST_COUNT)->getValue())) || (sim_end_condition))) {
// please complete sim_end_condition
// finish the simulation
print_heartbeat();
print_stats();
return TRUE;
}
cycle_count++;
if (!(cycle_count%5000))
{
print_heartbeat();
}
main_memory->run_a_cycle(); // *NEW-LAB2
WB_stage(main_memory);
MEM_stage(main_memory); // please modify MEM_stage function argument /** NEW-LAB2 */
EX_stage();
ID_stage();
FE_stage();
if (KNOB(KNOB_PRINT_PIPE_FREQ)->getValue() && !(cycle_count%KNOB(KNOB_PRINT_PIPE_FREQ)->getValue())) print_pipeline();
}
return TRUE;
}
int get_dram_row_id(ADDRINT addr) // NEW-LAB2
{
// addr >> 6; // NEW-LAB2
int dram_page_size,dram_row_id;
dram_page_size = KNOB(KNOB_DRAM_PAGE_SIZE)->getValue();
dram_row_id=(addr/(dram_page_size*1024));
return dram_row_id;
// return 2;
}
void print_stats() {
std::ofstream out((KNOB(KNOB_OUTPUT_FILE)->getValue()).c_str());
/* Do not modify this function. This messages will be used for grading */
out << "Total instruction: " << retired_instruction << endl;
out << "Total cycles: " << cycle_count << endl;
float ipc = (cycle_count ? ((float)retired_instruction/(float)cycle_count): 0 );
out << "Total IPC: " << ipc << endl;
out << "Total D-cache miss: " << dcache_miss_count << endl;
out << "Total D-cache hit: " << dcache_hit_count << endl;
out << "Total data hazard: " << data_hazard_count << endl;
out << "Total control hazard : " << control_hazard_count << endl;
out << "Total DRAM ROW BUFFER Hit: " << dram_row_buffer_hit_count << endl;
out << "Total DRAM ROW BUFFER Miss: "<< dram_row_buffer_miss_count << endl;
out << "Total Store-load forwarding: " << store_load_forwarding_count << endl;
out << "Total Branch Predictor Mispredictions: " << bpred_mispred_count << endl;
out << "Total Branch Predictor OK predictions: " << bpred_okpred_count << endl;
out << "Total DTLB Hit: " << dtlb_hit_count << endl;
out << "Total DTLB Miss: " << dtlb_miss_count << endl;
out << endl << endl << endl;
for (int ii = 0; ii < (KNOB(KNOB_RUN_THREAD_NUM)->getValue()); ii++ ) {
out << "THREAD instruction: " << retired_instruction_thread[ii] << " Thread id: " << ii << endl;
float thread_ipc = (cycle_count ? ((float)retired_instruction_thread[ii]/(float)cycle_count): 0 );
out << "THREAD IPC: " << thread_ipc << endl;
out << "THREAD D-cache miss: " << dcache_miss_count_thread[ii] << " Thread id: " << ii << endl;
out << "THREAD D-cache hit: " << dcache_hit_count_thread[ii] << " Thread id: " << ii << endl;
out << "THREAD data hazard: " << data_hazard_count_thread[ii] << " Thread id: " << ii << endl;
out << "THREAD control hazard : " << control_hazard_count_thread[ii] << " Thread id: " << ii << endl;
out << "THREAD Store-load forwarding: " << store_load_forwarding_count_thread[ii] << " Thread id: " << ii << endl;
out << "THREAD Branch Predictor Mispredictions: " << bpred_mispred_count_thread[ii] << " Thread id: " << ii << endl;
out << "THREAD Branch Predictor OK predictions: " << bpred_okpred_count_thread[ii] << " Thread id: " << ii << endl;
out << "THREAD DTLB Hit: " << dtlb_hit_count_thread[ii] << " Thread id: " << ii << endl;
out << "THREAD DTLB Miss: " << dtlb_miss_count_thread[ii] << " Thread id: " << ii << endl;
}
out.close();
}
void print_stats() { /* DO NOT MODIFY */
std::ofstream out((KNOB(KNOB_OUTPUT_FILE)->getValue()).c_str());
/* Do not modify this function. This messages will be used for grading */
out << "Total instruction: " << retired_instruction << endl;
out << "Total cycles: " << cycle_count << endl;
float ipc = (cycle_count ? ((float)retired_instruction/(float)cycle_count): 0 );
out << "IPC: " << ipc << endl;
out << "Total I-cache miss: " << icache_miss_count << endl;
out << "Total D-cache miss: " << dcache_miss_count << endl;
out << "Total L2-cache miss: " << l2_cache_miss_count << endl;
out << "Total data hazard: " << data_hazard_count << endl;
out << "Total control hazard : " << control_hazard_count << endl;
out.close();
}
void print_heartbeat()
{
static uint64_t last_cycle_thread[HW_MAX_THREAD] ;
static uint64_t last_inst_count_thread[HW_MAX_THREAD];
for (int ii = 0; ii < (KNOB(KNOB_RUN_THREAD_NUM)->getValue()); ii++ ) {
float temp_ipc = float(retired_instruction_thread[ii] - last_inst_count_thread[ii]) /(float)(cycle_count-last_cycle_thread[ii]) ;
float ipc = float(retired_instruction_thread[ii]) /(float)(cycle_count) ;
/* Do not modify this function. This messages will be used for grading */
cout <<"**Heartbeat** cycle_count: " << cycle_count << " inst:" << retired_instruction_thread[ii] << " IPC: " << temp_ipc << " Overall IPC: " << ipc << " thread_id " << ii << endl;
last_cycle_thread[ii] = cycle_count;
last_inst_count_thread[ii] = retired_instruction_thread[ii];
}
}
void memory_c::send_bus_out_queue()
{
//list<mem_req_s *>::iterator ii;
int jj ;
for(jj=0;jj<KNOB(KNOB_DRAM_BANK_NUM)->getValue();jj++){
//cout << "\nKNOB BANKS " << KNOB(KNOB_DRAM_BANK_NUM)->getValue();
//mem_req_s *dii = (*ii);
list<mem_req_s *>::iterator ii;
if(dram_bank_sch_queue[jj].empty())
continue;
//cout << "size is \n" << dram_bank_sch_queue[jj].size();
for(ii=(dram_bank_sch_queue[jj]).begin();ii!=(dram_bank_sch_queue[jj]).end();) //check all enteries and see which one is free.
{
//cout << "\nwithin OUT QUEUE of each bank";
mem_req_s* dii = (*ii);
assert(dii != NULL);
// cout <<"\nREADY CYCLES" << (*ii)->m_rdy_cycle;
if((dii)->m_rdy_cycle < cycle_count && (dii)->m_state==MEM_DRAM_SCH){
(dii)->m_state = MEM_DRAM_DONE;
// cout << (dii)->m_addr << "\nis ready";
dram_out_queue.push_back(dii); //keep pushing al entries into out queue.
(dii)->m_state = MEM_DRAM_OUT;
//dram_bank_rdy_cycle[jj] = 0;
ii = dram_bank_sch_queue[jj].erase(ii);
break;
}
else
ii++;
}
/* For Lab #2, you need to fill out this function */
}
}
void print_stats() {
std::ofstream out((KNOB(KNOB_OUTPUT_FILE)->getValue()).c_str());
/* Do not modify this function. This messages will be used for grading */
out << "Total instruction: " << retired_instruction << endl;
out << "Total cycles: " << cycle_count << endl;
float ipc = (cycle_count ? ((float)retired_instruction/(float)cycle_count): 0 );
out << "IPC: " << ipc << endl;
out << "Total I-cache miss: " << icache_miss_count << endl;
out << "Total D-cache miss: " << dcache_miss_count << endl;
out << "Total D-cache hit: " << dcache_hit_count << endl;
out << "Total data hazard: " << data_hazard_count << endl;
out << "Total control hazard : " << control_hazard_count << endl;
out << "Total DRAM ROW BUFFER Hit: " << dram_row_buffer_hit_count << endl;
out << "Total DRAM ROW BUFFER Miss: "<< dram_row_buffer_miss_count << endl;
out << "Total Store-load forwarding: " << store_load_forwarding_count << endl;
// new for LAB3
out << "Total Branch Predictor Mispredictions: " << bpred_mispred_count << endl;
out << "Total Branch Predictor OK predictions: " << bpred_okpred_count << endl;
out << "Total DTLB Hit: " << dtlb_hit_count << endl;
out << "Total DTLB Miss: " << dtlb_miss_count << endl<< endl;
//new for LAB4
out << "For LAB4 : " << endl << endl;
out << "Total float count: " << float_count << endl;
out << "Total integer count: " << integer_count << endl ;
out << "Total branch count: " << branch_count <<endl;
out << "Total load count: " << load_count << endl;
out << "Total store count: " << store_count << endl;
out << "Total I cache access count: " << retired_instruction << endl;
out << "Total integer register read count: " << int_reg_count << endl;
out << "Total float point register read count: " << fp_reg_count << endl;
out << "Total multiple count: " << multiple_count << endl;
out << "Total D cache read count: " << dcache_read_count << endl;
out << "Total D cache write count: " << dcache_write_count << endl;
out << "Total memory access count: " << dram_row_buffer_hit_count + dram_row_buffer_miss_count<< endl;
out << "Total integer register write count: " << int_reg_w_count << endl;
out << "Total float point register write count: " << fp_reg_w_count << endl;
out << "Total integer scheduler access count: " << integer_scheduler_count << endl;
out << "Total float point scheduler access count: " << float_scheduler_count << endl;
out.close();
}
bool dcache_access(ADDRINT addr)
{ /** please change uint32_t to ADDRINT NEW-LAB2 */
/* For Lab #1, you assume that all D-cache hit */
/* For Lab #2, you need to connect cache here */ // NEW-LAB2
// bool cache_hit;
bool hit = FALSE;
if (KNOB(KNOB_PERFECT_DCACHE)->getValue())
hit = TRUE;
else
{
// cache_hit=(bool)cache_access(data_cache,addr);
hit=(bool)cache_access(data_cache,addr);
// std::cout<<"cache hit="<<cache_hit;
// return cache_hit;
}
// std::cout<<"cache hit="<<hit;
return hit;
}
void print_stats() {
std::ofstream out((KNOB(KNOB_OUTPUT_FILE)->getValue()).c_str());
/* Do not modify this function. This messages will be used for grading */
out << "Total instruction: " << retired_instruction << endl;
out << "Total cycles: " << cycle_count << endl;
float ipc = (cycle_count ? ((float)retired_instruction/(float)cycle_count): 0 );
out << "IPC: " << ipc << endl;
out << "Total I-cache miss: " << icache_miss_count << endl;
out << "Total D-cache hit: " << dcache_hit_count << endl;
out << "Total D-cache miss: " << dcache_miss_count << endl;
out << "Total L2-cache miss: " << l2_cache_miss_count << endl;
out << "Total data hazard: " << data_hazard_count << endl;
out << "Total control hazard : " << control_hazard_count << endl;
out << "Total DRAM ROW BUFFER Hit: " << dram_row_buffer_hit_count << endl; // NEW-LAB2
out << "Total DRAM ROW BUFFER Miss: "<< dram_row_buffer_miss_count << endl; // NEW-LAB2
out <<" Total Store-load forwarding: " << store_load_forwarding_count << endl; // NEW-LAB2
out.close();
}
bool dcache_access(ADDRINT addr)
{
/** please change uint32_t to ADDRINT NEW-LAB2 */
/* For Lab #1, you assume that all D-cache hit */
/* For Lab #2, you need to connect cache here */ // NEW-LAB2
bool hit = FALSE;
if (KNOB(KNOB_PERFECT_DCACHE)->getValue()) /* always get a hit for perfect dcache */
{
hit = TRUE;
return hit;
}
if(cache_read(data_cache,addr))
{
/* cache hit */
return true;
}
else
return false; /* cache miss */
}
bool get_op(Op *op)
{
static UINT64 unique_count = 0;
Trace_op trace_op;
bool success = FALSE;
// read trace
// fill out op info
// return FALSE if the end of trace
success = (gzread(g_stream, &trace_op, sizeof(Trace_op)) >0 );
if (KNOB(KNOB_PRINT_INST)->getValue()) dprint_trace(&trace_op);
/* copy trace structure to op */
if (success) {
copy_trace_op(&trace_op, op);
op->inst_id = unique_count++;
op->valid = TRUE;
}
return success;
}
/* getOp */
bool get_op(Op *op, int fetch_id)
{
static UINT64 unique_count = 0;
if(end_of_stream[fetch_id])
return false;
Trace_op trace_op;
bool success = false;
// read trace
// fill out op info
// return FALSE if the end of trace
int read_size;
read_size = gzread(g_stream[fetch_id], &trace_op, sizeof(Trace_op));
success = read_size>0;
if(read_size!=sizeof(Trace_op) && read_size>0)
{
printf( "ERROR!! gzread reads corrupted op! @cycle:%llu\n", cycle_count);
success = false;
}
if (KNOB(KNOB_PRINT_INST)->getValue())
dprint_trace(&trace_op);
/* copy trace structure to op */
if (success)
{
copy_trace_op(&trace_op, op);
op->inst_id = unique_count++;
op->valid = TRUE;
op->thread_id = fetch_id;
return success; // get op so return
}
else
end_of_stream[fetch_id] = true;
return success;
}
bool run_a_cycle(memory_c *main_memory){
long int retired_instruction_cpy=0;
int terminate_count=0;
bool terminate_program=false;
for (;;) {
if ((KNOB(KNOB_MAX_SIM_COUNT)->getValue() && (cycle_count >= KNOB(KNOB_MAX_SIM_COUNT)->getValue())) ||
(KNOB(KNOB_MAX_INST_COUNT)->getValue() && (retired_instruction >= KNOB(KNOB_MAX_INST_COUNT)->getValue())) || (sim_end_condition) || terminate_program) {
// please complete sim_end_condition
// finish the simulation
print_heartbeat();
print_stats();
return TRUE;
}
cycle_count++;
if (!(cycle_count%5000)) {
print_heartbeat();
}
/*section to terminate the program if it fails to exit normally*/
if(terminate_count>1000)
{
if(retired_instruction_cpy==retired_instruction)
terminate_program=true;
else
{
retired_instruction_cpy=retired_instruction;
terminate_count=0;
}
}
else
terminate_count++;
/*section to terminate the program if it fails to exit normally*/
main_memory->run_a_cycle(); // *NEW-LAB2
WB_stage();
MEM_stage(main_memory); // please modify MEM_stage function argument /** NEW-LAB2 */
EX_stage();
ID_stage();
FE_stage();
if(trace_over && main_memory->all_mem_structures_empty() && pipeline_latches_empty())
sim_end_condition = true;
if (KNOB(KNOB_PRINT_PIPE_FREQ)->getValue() && !(cycle_count%KNOB(KNOB_PRINT_PIPE_FREQ)->getValue())) print_pipeline();
}
return TRUE;
}
void memory_c::init_mem()
{
/* For Lab #2, you do not need to modify this code */
/* you can add other code here if you want */
/* init mshr */
m_mshr_size = KNOB(KNOB_MSHR_SIZE)->getValue();
m_dram_bank_num = KNOB(KNOB_DRAM_BANK_NUM)->getValue();
m_block_size = KNOB(KNOB_BLOCK_SIZE)->getValue();
m_page_size = KNOB(KNOB_DRAM_PAGE_SIZE)->getValue(); //added by apk
m_row_hit_latency=KNOB(KNOB_MEM_LATENCY_ROW_HIT)->getValue(); //added by apk
m_row_miss_latency=KNOB(KNOB_MEM_LATENCY_ROW_MISS)->getValue(); //added by apk
for (int ii = 0 ; ii < m_mshr_size; ii++)
{
m_mshr_entry_s* entry = new m_mshr_entry_s;
entry->m_mem_req = new mem_req_s; // create a memory rquest data structure here
entry->valid = false;
entry->insert_time = 0;
m_mshr_free_list.push_back(entry);
}
/* init DRAM scheduler queues */
dram_in_queue.clear();
dram_out_queue.clear();
dram_bank_sch_queue = new list<mem_req_s*>[m_dram_bank_num];
dram_bank_open_row = new int64_t[m_dram_bank_num];
dram_bank_rdy_cycle = new uint64_t[m_dram_bank_num];
for(int ii=0;ii<m_dram_bank_num;ii++)
{
dram_bank_open_row[ii]=-1;
dram_bank_rdy_cycle[ii] = 0;
}
}
