/**
* Create a TCP segment with prefilled header.
*
* Called by tcp_write and tcp_enqueue_flags.
*
* @param pcb Protocol control block for the TCP connection.
* @param p pbuf that is used to hold the TCP header.
* @param flags TCP flags for header.
* @param seqno TCP sequence number of this packet
* @param optflags options to include in TCP header
* @return a new tcp_seg pointing to p, or NULL.
* The TCP header is filled in except ackno and wnd.
* p is freed on failure.
*/
static struct tcp_seg *
tcp_create_segment(struct tcp_pcb *pcb, struct pbuf *p, u8_t flags, u32_t seqno, u8_t optflags)
{
struct tcp_seg *seg;
u8_t optlen = LWIP_TCP_OPT_LENGTH(optflags);
if ((seg = (struct tcp_seg *)memp_malloc(MEMP_TCP_SEG)) == NULL) {
LWIP_DEBUGF(TCP_OUTPUT_DEBUG | 2, ("tcp_create_segment: no memory.\n"));
pbuf_free(p);
return NULL;
}
seg->flags = optflags;
seg->next = NULL;
seg->p = p;
seg->dataptr = p->payload;
seg->len = p->tot_len - optlen;
#if TCP_OVERSIZE_DBGCHECK
seg->oversize_left = 0;
#endif /* TCP_OVERSIZE_DBGCHECK */
#if TCP_CHECKSUM_ON_COPY
seg->chksum = 0;
seg->chksum_swapped = 0;
/* check optflags */
LWIP_ASSERT("invalid optflags passed: TF_SEG_DATA_CHECKSUMMED",
(optflags & TF_SEG_DATA_CHECKSUMMED) == 0);
#endif /* TCP_CHECKSUM_ON_COPY */
/* build TCP header */
if (pbuf_header(p, TCP_HLEN)) {
LWIP_DEBUGF(TCP_OUTPUT_DEBUG | 2, ("tcp_create_segment: no room for TCP header in pbuf.\n"));
TCP_STATS_INC(tcp.err);
tcp_seg_free(seg);
return NULL;
}
seg->tcphdr = (struct tcp_hdr *)seg->p->payload;
seg->tcphdr->src = htons(pcb->local_port);
seg->tcphdr->dest = htons(pcb->remote_port);
seg->tcphdr->seqno = htonl(seqno);
/* ackno is set in tcp_output */
TCPH_HDRLEN_FLAGS_SET(seg->tcphdr, (5 + optlen / 4), flags);
/* wnd and chksum are set in tcp_output */
seg->tcphdr->urgp = 0;
return seg;
}
/** Send an ACK without data.
*
* @param pcb Protocol control block for the TCP connection to send the ACK
*/
err_t
tcp_send_empty_ack(struct tcp_pcb *pcb)
{
struct pbuf *p;
struct tcp_hdr *tcphdr;
u8_t optlen = 0;
u32_t *opts;
#if LWIP_TCP_TIMESTAMPS
if (pcb->flags & TF_TIMESTAMP) {
optlen = LWIP_TCP_OPT_LENGTH(TF_SEG_OPTS_TS);
}
#endif
p = tcp_output_alloc_header(pcb, optlen, 0, htonl(pcb->snd_nxt));
if (p == NULL) {
LWIP_DEBUGF(TCP_OUTPUT_DEBUG, ("tcp_output: (ACK) could not allocate pbuf\n"));
return ERR_BUF;
}
tcphdr = (struct tcp_hdr *)p->payload;
LWIP_DEBUGF(TCP_OUTPUT_DEBUG,
("tcp_output: sending ACK for %"U32_F"\n", pcb->rcv_nxt));
/* remove ACK flags from the PCB, as we send an empty ACK now */
pcb->flags &= ~(TF_ACK_DELAY | TF_ACK_NOW);
opts = (u32_t *)(void *)(tcphdr + 1);
/* NB. MSS option is only sent on SYNs, so ignore it here */
#if LWIP_TCP_TIMESTAMPS
pcb->ts_lastacksent = pcb->rcv_nxt;
if (pcb->flags & TF_TIMESTAMP) {
tcp_build_timestamp_option(pcb, opts );
opts += 3;
}
#endif
pcb->ip_output(p, pcb, 0);
tcp_tx_pbuf_free(pcb, p);
(void)opts; /* Fix warning -Wunused-but-set-variable */
return ERR_OK;
}
/**
* Enqueue TCP options for transmission.
*
* Called by tcp_connect(), tcp_listen_input(), and tcp_send_ctrl().
*
* @param pcb Protocol control block for the TCP connection.
* @param flags TCP header flags to set in the outgoing segment.
* @param optdata pointer to TCP options, or NULL.
* @param optlen length of TCP options in bytes.
*/
err_t
tcp_enqueue_flags(struct tcp_pcb *pcb, u8_t flags)
{
struct pbuf *p;
struct tcp_seg *seg;
u8_t optflags = 0;
u8_t optlen = 0;
LWIP_DEBUGF(TCP_QLEN_DEBUG, ("tcp_enqueue_flags: queuelen: %"U16_F"\n", (u16_t)pcb->snd_queuelen));
LWIP_ASSERT("tcp_enqueue_flags: need either TCP_SYN or TCP_FIN in flags (programmer violates API)",
(flags & (TCP_SYN | TCP_FIN)) != 0);
/* check for configured max queuelen and possible overflow (FIN flag should always come through!)*/
if (((pcb->snd_queuelen >= pcb->max_unsent_len) || (pcb->snd_queuelen > TCP_SNDQUEUELEN_OVERFLOW)) &&
((flags & TCP_FIN) == 0)) {
LWIP_DEBUGF(TCP_OUTPUT_DEBUG | 3, ("tcp_enqueue_flags: too long queue %"U16_F" (max %"U16_F")\n",
pcb->snd_queuelen, pcb->max_unsent_len));
TCP_STATS_INC(tcp.memerr);
pcb->flags |= TF_NAGLEMEMERR;
return ERR_MEM;
}
if (flags & TCP_SYN) {
optflags = TF_SEG_OPTS_MSS;
if(enable_wnd_scale) optflags |= TF_SEG_OPTS_WNDSCALE;
#if LWIP_TCP_TIMESTAMPS
if (pcb->enable_ts_opt && !(flags & TCP_ACK)) {
// enable initial timestamp announcement only for the connecting side. accepting side reply accordingly.
optflags |= TF_SEG_OPTS_TS;
}
#endif
}
#if LWIP_TCP_TIMESTAMPS
if ((pcb->flags & TF_TIMESTAMP)) {
optflags |= TF_SEG_OPTS_TS;
}
#endif /* LWIP_TCP_TIMESTAMPS */
optlen = LWIP_TCP_OPT_LENGTH(optflags);
/* tcp_enqueue_flags is always called with either SYN or FIN in flags.
* We need one available snd_buf byte to do that.
* This means we can't send FIN while snd_buf==0. A better fix would be to
* not include SYN and FIN sequence numbers in the snd_buf count. */
/*if (pcb->snd_buf == 0) {
LWIP_DEBUGF(TCP_OUTPUT_DEBUG | 3, ("tcp_enqueue_flags: no send buffer available\n"));
TCP_STATS_INC(tcp.memerr);
return ERR_MEM;
}*/ //to consider snd_buf for syn or fin, unmarked sections with SND_BUF_FOR_SYN_FIN
/* Allocate pbuf with room for TCP header + options */
if ((p = tcp_tx_pbuf_alloc(pcb, optlen, PBUF_RAM)) == NULL) {
pcb->flags |= TF_NAGLEMEMERR;
TCP_STATS_INC(tcp.memerr);
return ERR_MEM;
}
LWIP_ASSERT("tcp_enqueue_flags: check that first pbuf can hold optlen",
(p->len >= optlen));
/* Allocate memory for tcp_seg, and fill in fields. */
if ((seg = tcp_create_segment(pcb, p, flags, pcb->snd_lbb, optflags)) == NULL) {
pcb->flags |= TF_NAGLEMEMERR;
TCP_STATS_INC(tcp.memerr);
return ERR_MEM;
}
LWIP_ASSERT("tcp_enqueue_flags: invalid segment length", seg->len == 0);
LWIP_DEBUGF(TCP_OUTPUT_DEBUG | LWIP_DBG_TRACE,
("tcp_enqueue_flags: queueing %"U32_F":%"U32_F" (0x%"X16_F")\n",
ntohl(seg->tcphdr->seqno),
ntohl(seg->tcphdr->seqno) + TCP_TCPLEN(seg),
(u16_t)flags));
/* Now append seg to pcb->unsent queue */
if (pcb->unsent == NULL) {
pcb->unsent = seg;
} else {
struct tcp_seg *useg;
for (useg = pcb->unsent; useg->next != NULL; useg = useg->next);
useg->next = seg;
}
#if TCP_OVERSIZE
/* The new unsent tail has no space */
pcb->unsent_oversize = 0;
#endif /* TCP_OVERSIZE */
/* SYN and FIN bump the sequence number */
if ((flags & TCP_SYN) || (flags & TCP_FIN)) {
pcb->snd_lbb++;
/* optlen does not influence snd_buf */
// pcb->snd_buf--; SND_BUF_FOR_SYN_FIN
}
if (flags & TCP_FIN) {
pcb->flags |= TF_FIN;
}
/* update number of segments on the queues */
pcb->snd_queuelen += pbuf_clen(seg->p);
LWIP_DEBUGF(TCP_QLEN_DEBUG, ("tcp_enqueue_flags: %"S16_F" (after enqueued)\n", pcb->snd_queuelen));
if (pcb->snd_queuelen != 0) {
LWIP_ASSERT("tcp_enqueue_flags: invalid queue length",
pcb->unacked != NULL || pcb->unsent != NULL);
}
return ERR_OK;
}
/**
* Create a TCP segment with prefilled header.
*
* Called by tcp_write and tcp_enqueue_flags.
*
* @param pcb Protocol control block for the TCP connection.
* @param p pbuf that is used to hold the TCP header.
* @param flags TCP flags for header.
* @param seqno TCP sequence number of this packet
* @param optflags options to include in TCP header
* @return a new tcp_seg pointing to p, or NULL.
* The TCP header is filled in except ackno and wnd.
* p is freed on failure.
*/
static struct tcp_seg *
tcp_create_segment(struct tcp_pcb *pcb, struct pbuf *p, u8_t flags, u32_t seqno, u8_t optflags)
{
struct tcp_seg *seg;
u8_t optlen = LWIP_TCP_OPT_LENGTH(optflags);
#if LWIP_3RD_PARTY_BUFS
if ((seg = external_tcp_seg_alloc(pcb)) == NULL) {
#else
if ((seg = (struct tcp_seg *)memp_malloc(MEMP_TCP_SEG)) == NULL) {
#endif
LWIP_DEBUGF(TCP_OUTPUT_DEBUG | 2, ("tcp_create_segment: no memory.\n"));
tcp_tx_pbuf_free(pcb, p);
return NULL;
}
seg->flags = optflags;
seg->next = NULL;
seg->p = p;
seg->dataptr = p->payload;
seg->len = p->tot_len - optlen;
#if TCP_OVERSIZE_DBGCHECK
seg->oversize_left = 0;
#endif /* TCP_OVERSIZE_DBGCHECK */
#if TCP_CHECKSUM_ON_COPY
seg->chksum = 0;
seg->chksum_swapped = 0;
/* check optflags */
LWIP_ASSERT("invalid optflags passed: TF_SEG_DATA_CHECKSUMMED",
(optflags & TF_SEG_DATA_CHECKSUMMED) == 0);
#endif /* TCP_CHECKSUM_ON_COPY */
seg->seqno = seqno;
/* build TCP header */
if (pbuf_header(p, TCP_HLEN)) {
LWIP_DEBUGF(TCP_OUTPUT_DEBUG | 2, ("tcp_create_segment: no room for TCP header in pbuf.\n"));
TCP_STATS_INC(tcp.err);
tcp_tx_seg_free(pcb, seg);
return NULL;
}
seg->tcphdr = (struct tcp_hdr *)seg->p->payload;
seg->tcphdr->src = htons(pcb->local_port);
seg->tcphdr->dest = htons(pcb->remote_port);
seg->tcphdr->seqno = htonl(seqno);
/* ackno is set in tcp_output */
TCPH_HDRLEN_FLAGS_SET(seg->tcphdr, (5 + optlen / 4), flags);
/* wnd and chksum are set in tcp_output */
seg->tcphdr->urgp = 0;
return seg;
}
/**
* Allocate a PBUF_RAM pbuf, perhaps with extra space at the end.
*
* This function is like pbuf_alloc(layer, length, PBUF_RAM) except
* there may be extra bytes available at the end.
*
* @param layer flag to define header size.
* @param length size of the pbuf's payload.
* @param max_length maximum usable size of payload+oversize.
* @param oversize pointer to a u16_t that will receive the number of usable tail bytes.
* @param pcb The TCP connection that willo enqueue the pbuf.
* @param apiflags API flags given to tcp_write.
* @param first_seg true when this pbuf will be used in the first enqueued segment.
* @param
*/
static struct pbuf *
tcp_pbuf_prealloc(u16_t length, u16_t max_length,
u16_t *oversize, struct tcp_pcb *pcb, u8_t apiflags,
u8_t first_seg)
{
struct pbuf *p;
u16_t alloc = length;
if (length < max_length) {
/* Should we allocate an oversized pbuf, or just the minimum
* length required? If tcp_write is going to be called again
* before this segment is transmitted, we want the oversized
* buffer. If the segment will be transmitted immediately, we can
* save memory by allocating only length. We use a simple
* heuristic based on the following information:
*
* Did the user set TCP_WRITE_FLAG_MORE?
*
* Will the Nagle algorithm defer transmission of this segment?
*/
if ((apiflags & TCP_WRITE_FLAG_MORE) ||
(!(pcb->flags & TF_NODELAY) &&
(!first_seg ||
pcb->unsent != NULL ||
pcb->unacked != NULL))) {
alloc = LWIP_MIN(max_length, LWIP_MEM_ALIGN_SIZE(length + pcb->tcp_oversize_val));
}
}
p = tcp_tx_pbuf_alloc(pcb, alloc, PBUF_RAM);
if (p == NULL) {
return NULL;
}
LWIP_ASSERT("need unchained pbuf", p->next == NULL);
*oversize = p->len - length;
/* trim p->len to the currently used size */
p->len = p->tot_len = length;
return p;
}
/** Checks if tcp_write is allowed or not (checks state, snd_buf and snd_queuelen).
*
* @param pcb the tcp pcb to check for
* @param len length of data to send (checked agains snd_buf)
* @return ERR_OK if tcp_write is allowed to proceed, another err_t otherwise
*/
static err_t
tcp_write_checks(struct tcp_pcb *pcb, u32_t len)
{
/* connection is in invalid state for data transmission? */
if ((get_tcp_state(pcb) != ESTABLISHED) &&
(get_tcp_state(pcb) != CLOSE_WAIT) &&
(get_tcp_state(pcb) != SYN_SENT) &&
(get_tcp_state(pcb) != SYN_RCVD)) {
LWIP_DEBUGF(TCP_OUTPUT_DEBUG | LWIP_DBG_STATE | LWIP_DBG_LEVEL_SEVERE, ("tcp_write() called in invalid state\n"));
return ERR_CONN;
} else if (len == 0) {
return ERR_OK;
}
/* fail on too much data */
if (len > pcb->snd_buf) {
LWIP_DEBUGF(TCP_OUTPUT_DEBUG | 3, ("tcp_write: too much data (len=%"U32_F" > snd_buf=%"U32_F")\n",
len, pcb->snd_buf));
pcb->flags |= TF_NAGLEMEMERR;
return ERR_MEM;
}
LWIP_DEBUGF(TCP_QLEN_DEBUG, ("tcp_write: queuelen: %"U32_F"\n", (u32_t)pcb->snd_queuelen));
/* If total number of pbufs on the unsent/unacked queues exceeds the
* configured maximum, return an error */
/* check for configured max queuelen and possible overflow */
if ((pcb->snd_queuelen >= pcb->max_unsent_len) || (pcb->snd_queuelen > TCP_SNDQUEUELEN_OVERFLOW)) {
LWIP_DEBUGF(TCP_OUTPUT_DEBUG | 3, ("tcp_write: too long queue %"U32_F" (max %"U32_F")\n",
pcb->snd_queuelen, pcb->max_unsent_len));
TCP_STATS_INC(tcp.memerr);
pcb->flags |= TF_NAGLEMEMERR;
return ERR_MEM;
}
if (pcb->snd_queuelen != 0) {
} else {
LWIP_ASSERT("tcp_write: no pbufs on queue => both queues empty",
pcb->unacked == NULL && pcb->unsent == NULL);
}
return ERR_OK;
}
/**
* Write data for sending (but does not send it immediately).
*
* It waits in the expectation of more data being sent soon (as
* it can send them more efficiently by combining them together).
* To prompt the system to send data now, call tcp_output() after
* calling tcp_write().
*
* @param pcb Protocol control block for the TCP connection to enqueue data for.
* @param arg Pointer to the data to be enqueued for sending.
* @param len Data length in bytes
* @param apiflags combination of following flags :
* - TCP_WRITE_FLAG_COPY (0x01) data will be copied into memory belonging to the stack
* - TCP_WRITE_FLAG_MORE (0x02) for TCP connection, PSH flag will be set on last segment sent,
* @return ERR_OK if enqueued, another err_t on error
*/
err_t
tcp_write(struct tcp_pcb *pcb, const void *arg, u32_t len, u8_t apiflags)
{
struct pbuf *concat_p = NULL;
struct tcp_seg *seg = NULL, *prev_seg = NULL, *queue = NULL;
u32_t pos = 0; /* position in 'arg' data */
u32_t queuelen;
u8_t optlen = 0;
u8_t optflags = 0;
#if TCP_OVERSIZE
u16_t oversize = 0;
u16_t oversize_used = 0;
#endif /* TCP_OVERSIZE */
#if TCP_CHECKSUM_ON_COPY
u16_t concat_chksum = 0;
u8_t concat_chksum_swapped = 0;
u16_t concat_chksummed = 0;
#endif /* TCP_CHECKSUM_ON_COPY */
err_t err;
/* don't allocate segments bigger than half the maximum window we ever received */
u16_t mss_local = LWIP_MIN(pcb->mss, pcb->snd_wnd_max/2);
mss_local = mss_local ? mss_local : pcb->mss;
int byte_queued = pcb->snd_nxt - pcb->lastack;
if ( len < pcb->mss)
pcb->snd_sml_add = (pcb->unacked ? pcb->unacked->len : 0) + byte_queued;
#if LWIP_NETIF_TX_SINGLE_PBUF
/* Always copy to try to create single pbufs for TX */
apiflags |= TCP_WRITE_FLAG_COPY;
#endif /* LWIP_NETIF_TX_SINGLE_PBUF */
LWIP_DEBUGF(TCP_OUTPUT_DEBUG, ("tcp_write(pcb=%p, data=%p, len=%"U16_F", apiflags=%"U16_F")\n",
(void *)pcb, arg, len, (u16_t)apiflags));
LWIP_ERROR("tcp_write: arg == NULL (programmer violates API)",
arg != NULL, return ERR_ARG;);
err = tcp_write_checks(pcb, len);
if (err != ERR_OK) {
return err;
}
queuelen = pcb->snd_queuelen;
#if LWIP_TCP_TIMESTAMPS
if ((pcb->flags & TF_TIMESTAMP)) {
optflags = TF_SEG_OPTS_TS;
/* ensure that segments can hold at least one data byte... */
mss_local = LWIP_MAX(mss_local, LWIP_TCP_OPT_LEN_TS + 1);
}
#endif /* LWIP_TCP_TIMESTAMPS */
optlen = LWIP_TCP_OPT_LENGTH( optflags );
/*
* TCP segmentation is done in three phases with increasing complexity:
*
* 1. Copy data directly into an oversized pbuf.
* 2. Chain a new pbuf to the end of pcb->unsent.
* 3. Create new segments.
*
* We may run out of memory at any point. In that case we must
* return ERR_MEM and not change anything in pcb. Therefore, all
* changes are recorded in local variables and committed at the end
* of the function. Some pcb fields are maintained in local copies:
*
* queuelen = pcb->snd_queuelen
* oversize = pcb->unsent_oversize
*
* These variables are set consistently by the phases:
*
* seg points to the last segment tampered with.
*
* pos records progress as data is segmented.
*/
/* Find the tail of the unsent queue. */
if (pcb->unsent != NULL) {
u16_t space;
u16_t unsent_optlen;
if (!pcb->last_unsent || pcb->last_unsent->next) {
/* @todo: this could be sped up by keeping last_unsent in the pcb */
for (pcb->last_unsent = pcb->unsent; pcb->last_unsent->next != NULL;
pcb->last_unsent = pcb->last_unsent->next);
}
/* Usable space at the end of the last unsent segment */
unsent_optlen = LWIP_TCP_OPT_LENGTH(pcb->last_unsent->flags);
LWIP_ASSERT("mss_local is too small", mss_local >= pcb->last_unsent->len + unsent_optlen);
space = mss_local - (pcb->last_unsent->len + unsent_optlen);
/*
* Phase 1: Copy data directly into an oversized pbuf.
*
* The number of bytes copied is recorded in the oversize_used
* variable. The actual copying is done at the bottom of the
* function.
*/
#if TCP_OVERSIZE
#if TCP_OVERSIZE_DBGCHECK
/* check that pcb->unsent_oversize matches last_unsent->unsent_oversize */
LWIP_ASSERT("unsent_oversize mismatch (pcb vs. last_unsent)",
pcb->unsent_oversize == pcb->last_unsent->oversize_left);
#endif /* TCP_OVERSIZE_DBGCHECK */
oversize = pcb->unsent_oversize;
if (oversize > 0) {
LWIP_ASSERT("inconsistent oversize vs. space", oversize_used <= space);
seg = pcb->last_unsent;
oversize_used = oversize < len ? oversize : len;
pos += oversize_used;
oversize -= oversize_used;
space -= oversize_used;
}
/* now we are either finished or oversize is zero */
LWIP_ASSERT("inconsistend oversize vs. len", (oversize == 0) || (pos == len));
#endif /* TCP_OVERSIZE */
/*
* Phase 2: Chain a new pbuf to the end of pcb->unsent.
*
* We don't extend segments containing SYN/FIN flags or options
* (len==0). The new pbuf is kept in concat_p and pbuf_cat'ed at
* the end.
*/
if ((pos < len) && (space > 0) && (pcb->last_unsent->len > 0)) {
u16_t seglen = space < len - pos ? space : len - pos;
seg = pcb->last_unsent;
/* Create a pbuf with a copy or reference to seglen bytes. We
* can use PBUF_RAW here since the data appears in the middle of
* a segment. A header will never be prepended. */
if (apiflags & TCP_WRITE_FLAG_COPY) {
/* Data is copied */
if ((concat_p = tcp_pbuf_prealloc(seglen, space, &oversize, pcb, apiflags, 1)) == NULL) {
LWIP_DEBUGF(TCP_OUTPUT_DEBUG | 2,
("tcp_write : could not allocate memory for pbuf copy size %"U16_F"\n",
seglen));
goto memerr;
}
#if TCP_OVERSIZE_DBGCHECK
pcb->last_unsent->oversize_left += oversize;
#endif /* TCP_OVERSIZE_DBGCHECK */
TCP_DATA_COPY2(concat_p->payload, (u8_t*)arg + pos, seglen, &concat_chksum, &concat_chksum_swapped);
#if TCP_CHECKSUM_ON_COPY
concat_chksummed += seglen;
#endif /* TCP_CHECKSUM_ON_COPY */
} else {
LWIP_ASSERT("tcp_write : we are never here", 0);
goto memerr;
}
pos += seglen;
queuelen += pbuf_clen(concat_p);
}
} else {
#if TCP_OVERSIZE
pcb->last_unsent = NULL;
LWIP_ASSERT("unsent_oversize mismatch (pcb->unsent is NULL)",
pcb->unsent_oversize == 0);
#endif /* TCP_OVERSIZE */
}
/*
* Phase 3: Create new segments.
*
* The new segments are chained together in the local 'queue'
* variable, ready to be appended to pcb->unsent.
*/
while (pos < len) {
struct pbuf *p;
u32_t left = len - pos;
u16_t max_len = mss_local - optlen;
u16_t seglen = left > max_len ? max_len : left;
if (apiflags & TCP_WRITE_FLAG_COPY) {
/* If copy is set, memory should be allocated and data copied
* into pbuf */
if ((p = tcp_pbuf_prealloc(seglen + optlen, mss_local, &oversize, pcb, apiflags, queue == NULL)) == NULL) {
LWIP_DEBUGF(TCP_OUTPUT_DEBUG | 2, ("tcp_write : could not allocate memory for pbuf copy size %"U16_F"\n", seglen));
goto memerr;
}
LWIP_ASSERT("tcp_write: check that first pbuf can hold the complete seglen",
(p->len >= seglen));
TCP_DATA_COPY2((char *)p->payload + optlen, (u8_t*)arg + pos, seglen, &chksum, &chksum_swapped);
} else {
LWIP_ASSERT("tcp_write: we are never here",0);
goto memerr;
}
queuelen += pbuf_clen(p);
/* Now that there are more segments queued, we check again if the
* length of the queue exceeds the configured maximum or
* overflows. */
if ((queuelen > pcb->max_unsent_len) || (queuelen > TCP_SNDQUEUELEN_OVERFLOW)) {
LWIP_DEBUGF(TCP_OUTPUT_DEBUG | 2, ("tcp_write: queue too long %"U32_F" (%"U32_F")\n", queuelen, pcb->max_unsent_len));
tcp_tx_pbuf_free(pcb, p);
goto memerr;
}
if ((seg = tcp_create_segment(pcb, p, 0, pcb->snd_lbb + pos, optflags)) == NULL) {
goto memerr;
}
#if TCP_OVERSIZE_DBGCHECK
seg->oversize_left = oversize;
#endif /* TCP_OVERSIZE_DBGCHECK */
#if TCP_CHECKSUM_ON_COPY
seg->chksum = chksum;
seg->chksum_swapped = chksum_swapped;
seg->flags |= TF_SEG_DATA_CHECKSUMMED;
#endif /* TCP_CHECKSUM_ON_COPY */
/* Fix dataptr for the nocopy case */
if ((apiflags & TCP_WRITE_FLAG_COPY) == 0) {
seg->dataptr = (u8_t*)arg + pos;
}
/* first segment of to-be-queued data? */
if (queue == NULL) {
queue = seg;
} else {
/* Attach the segment to the end of the queued segments */
LWIP_ASSERT("prev_seg != NULL", prev_seg != NULL);
prev_seg->next = seg;
}
/* remember last segment of to-be-queued data for next iteration */
prev_seg = seg;
LWIP_DEBUGF(TCP_OUTPUT_DEBUG | LWIP_DBG_TRACE, ("tcp_write: queueing %"U32_F":%"U32_F"\n",
ntohl(seg->tcphdr->seqno),
ntohl(seg->tcphdr->seqno) + TCP_TCPLEN(seg)));
pos += seglen;
}
/*
* All three segmentation phases were successful. We can commit the
* transaction.
*/
/*
* Phase 1: If data has been added to the preallocated tail of
* last_unsent, we update the length fields of the pbuf chain.
*/
#if TCP_OVERSIZE
if (oversize_used > 0) {
struct pbuf *p;
/* Bump tot_len of whole chain, len of tail */
for (p = pcb->last_unsent->p; p; p = p->next) {
p->tot_len += oversize_used;
if (p->next == NULL) {
TCP_DATA_COPY((char *)p->payload + p->len, arg, oversize_used, pcb->last_unsent);
p->len += oversize_used;
}
}
pcb->last_unsent->len += oversize_used;
#if TCP_OVERSIZE_DBGCHECK
pcb->last_unsent->oversize_left -= oversize_used;
#endif /* TCP_OVERSIZE_DBGCHECK */
}
pcb->unsent_oversize = oversize;
#endif /* TCP_OVERSIZE */
/*
* Phase 2: concat_p can be concatenated onto pcb->last_unsent->p
*/
if (concat_p != NULL) {
LWIP_ASSERT("tcp_write: cannot concatenate when pcb->unsent is empty",
(pcb->last_unsent != NULL));
pbuf_cat(pcb->last_unsent->p, concat_p);
pcb->last_unsent->len += concat_p->tot_len;
#if TCP_CHECKSUM_ON_COPY
if (concat_chksummed) {
tcp_seg_add_chksum(concat_chksum, concat_chksummed, &pcb->last_unsent->chksum,
&pcb->last_unsent->chksum_swapped);
pcb->last_unsent->flags |= TF_SEG_DATA_CHECKSUMMED;
}
#endif /* TCP_CHECKSUM_ON_COPY */
}
/*
* Phase 3: Append queue to pcb->unsent. Queue may be NULL, but that
* is harmless
*/
if (pcb->last_unsent == NULL) {
pcb->unsent = queue;
} else {
pcb->last_unsent->next = queue;
}
pcb->last_unsent = seg;
/*
* Finally update the pcb state.
*/
pcb->snd_lbb += len;
pcb->snd_buf -= len;
pcb->snd_queuelen = queuelen;
LWIP_DEBUGF(TCP_QLEN_DEBUG, ("tcp_write: %"S16_F" (after enqueued)\n",
pcb->snd_queuelen));
if (pcb->snd_queuelen != 0) {
LWIP_ASSERT("tcp_write: valid queue length",
pcb->unacked != NULL || pcb->unsent != NULL);
}
/* Set the PSH flag in the last segment that we enqueued. */
if (seg != NULL && seg->tcphdr != NULL) {
TCPH_SET_FLAG(seg->tcphdr, TCP_PSH);
}
return ERR_OK;
memerr:
pcb->flags |= TF_NAGLEMEMERR;
TCP_STATS_INC(tcp.memerr);
if (concat_p != NULL) {
tcp_tx_pbuf_free(pcb, concat_p);
}
if (queue != NULL) {
tcp_tx_segs_free(pcb, queue);
}
if (pcb->snd_queuelen != 0) {
LWIP_ASSERT("tcp_write: valid queue length", pcb->unacked != NULL ||
pcb->unsent != NULL);
}
LWIP_DEBUGF(TCP_QLEN_DEBUG | LWIP_DBG_STATE, ("tcp_write: %"S16_F" (with mem err)\n", pcb->snd_queuelen));
return ERR_MEM;
}
