C++ (Cpp) MAL_Config 예제들

예제 #1

/*******************************************************************************
* Function Name  : Set_System
* Description    : Configures Main system clocks & power
* Input          : None.
* Return         : None.
*******************************************************************************/
void Set_System(void) {
  #if defined (USE_STM3210B_EVAL) || defined (USE_STM3210E_EVAL)  
  /* Enable and Disconnect Line GPIO clock */
//    USB_Disconnect_Config();
  #endif /* (USE_STM3210B_EVAL) || (USE_STM3210E_EVAL) */

  /* MAL configuration */
  MAL_Config();
}

예제 #2

파일: hw_config.c 프로젝트: RTOS-Developers/TRTOS

/*******************************************************************************
* Function Name  : Set_System
* Description    : Configures Main system clocks & power
* Input          : None.
* Return         : None.
*******************************************************************************/
void Set_System(void)
{

  /* RCC configuration */
  RCC_Config();
  GPIO_Config();
  /* MAL configuration */
  MAL_Config();
}

예제 #3

파일: hw_config.c 프로젝트: neirons/pythondatalogger

/*******************************************************************************
* Function Name  : Set_System
* Description    : Configures Main system clocks & power
* Input          : None.
* Return         : None.
*******************************************************************************/
void Set_System(void)
{
  /* RCC configuration */
  RCC_Config();

  /* Enable and GPIOD clock */
  USB_Disconnect_Config();

  /* MAL configuration */
  MAL_Config();
}

예제 #4

파일: mass_storage.c 프로젝트: neirons/pythondatalogger

/*******************************************************************************
* Function Name  : Mass_Storage_Start
* Description    : Starts the mass storage demo.
* Input          : None
* Output         : None
* Return         : None
*******************************************************************************/
void Mass_Storage_Start (void)
{
  NVIC_InitTypeDef NVIC_InitStructure;
  
#if 1  
  /* Enable and GPIOD clock */
  USB_Disconnect_Config();
#endif  

  

  /* MAL configuration */
  MAL_Config();

  Set_USBClock();

  NVIC_InitStructure.NVIC_IRQChannel = USB_LP_CAN1_RX0_IRQn;
  NVIC_InitStructure.NVIC_IRQChannelPreemptionPriority = 1;
  NVIC_InitStructure.NVIC_IRQChannelSubPriority = 1;
  NVIC_InitStructure.NVIC_IRQChannelCmd = ENABLE;
  NVIC_Init(&NVIC_InitStructure);

  NVIC_InitStructure.NVIC_IRQChannel = USB_HP_CAN1_TX_IRQn;
  NVIC_InitStructure.NVIC_IRQChannelPreemptionPriority = 1;
  NVIC_InitStructure.NVIC_IRQChannelSubPriority = 0;
  NVIC_InitStructure.NVIC_IRQChannelCmd = ENABLE;
  NVIC_Init(&NVIC_InitStructure);
  
  NVIC_InitStructure.NVIC_IRQChannel = SDIO_IRQn;
  NVIC_InitStructure.NVIC_IRQChannelPreemptionPriority = 0;
  NVIC_InitStructure.NVIC_IRQChannelSubPriority = 0;
  NVIC_InitStructure.NVIC_IRQChannelCmd = ENABLE;
  NVIC_Init(&NVIC_InitStructure);

  USB_Init();

  

}

예제 #5

파일: usb.c 프로젝트: 593141477/3DPrinter-firmware

void USBDevice_Connect()
{
    /* MAL configuration */
    MAL_Config();
    USB_Init();
}

예제 #6

파일: mass_storage.c 프로젝트: freemanqiu/STM3210E_Demo

/*******************************************************************************
* Function Name  : Mass_Storage_Start
* Description    : Starts the mass storage demo.
* Input          : None
* Output         : None
* Return         : None
*******************************************************************************/
void Mass_Storage_Start (void)
{
  NVIC_InitTypeDef NVIC_InitStructure;

  /* Disble the JoyStick interrupts */
  IntExtOnOffConfig(DISABLE);


  while(ReadKey() != NOKEY)
  {
  }

  RCC_AHBPeriphClockCmd(RCC_AHBPeriph_FSMC, ENABLE);
  /* Clear the LCD screen */
  LCD_Clear(White);

  LCD_SetDisplayWindow(160, 223, 128, 128);
 
  LCD_NORDisplay(USB_ICON);
  RCC_AHBPeriphClockCmd(RCC_AHBPeriph_FSMC, ENABLE);
  /* Disable LCD Window mode */
  LCD_WindowModeDisable();
  
  /* Set the Back Color */
  LCD_SetBackColor(Blue);
  /* Set the Text Color */
  LCD_SetTextColor(White); 

  
  /* Display the "  Plug the USB   " message */
  LCD_DisplayStringLine(Line8, " Plug the USB Cable ");
  LCD_DisplayStringLine(Line9, "Exit:  Push JoyStick");
    
  /* Enable and GPIOD clock */
  USB_Disconnect_Config();
  
  /* MAL configuration */
  MAL_Config();

  Set_USBClock();

  NVIC_InitStructure.NVIC_IRQChannel = USB_LP_CAN1_RX0_IRQn;
  NVIC_InitStructure.NVIC_IRQChannelPreemptionPriority = 1;
  NVIC_InitStructure.NVIC_IRQChannelSubPriority = 1;
  NVIC_InitStructure.NVIC_IRQChannelCmd = ENABLE;
  NVIC_Init(&NVIC_InitStructure);

  NVIC_InitStructure.NVIC_IRQChannel = USB_HP_CAN1_TX_IRQn;
  NVIC_InitStructure.NVIC_IRQChannelPreemptionPriority = 1;
  NVIC_InitStructure.NVIC_IRQChannelSubPriority = 0;
  NVIC_InitStructure.NVIC_IRQChannelCmd = ENABLE;
  NVIC_Init(&NVIC_InitStructure);
  
  NVIC_InitStructure.NVIC_IRQChannel = SDIO_IRQn;
  NVIC_InitStructure.NVIC_IRQChannelPreemptionPriority = 0;
  NVIC_InitStructure.NVIC_IRQChannelSubPriority = 0;
  NVIC_InitStructure.NVIC_IRQChannelCmd = ENABLE;
  NVIC_Init(&NVIC_InitStructure);

  USB_Init();

  while (bDeviceState != CONFIGURED)
  {
    if(ReadKey() != NOKEY)
    {
      PowerOff();
      LCD_Clear(White);
      DisplayMenu();
      IntExtOnOffConfig(ENABLE);
      return;
    }
  }

  LCD_ClearLine(Line9);
  /* Display the "To stop Press SEL" message */
  LCD_DisplayStringLine(Line8, "  To stop Press SEL ");

  /* Loop until SEL key pressed */
  while(ReadKey() != SEL)
  {
  }

  PowerOff();
  
  LCD_Clear(White);
  DisplayMenu();
  IntExtOnOffConfig(ENABLE);
}