};
#ifdef CONFIG_MACH_TREO680
static unsigned long treo680_pin_config[] __initdata = {
GPIO33_GPIO, /* SD read only */
/* MATRIX KEYPAD - different wake up source */
GPIO100_KP_MKIN_0 | WAKEUP_ON_LEVEL_HIGH,
GPIO99_KP_MKIN_5,
};
#endif /* CONFIG_MACH_TREO680 */
#ifdef CONFIG_MACH_CENTRO
static unsigned long centro685_pin_config[] __initdata = {
/* Bluetooth attached to BT UART*/
MFP_CFG_OUT(GPIO80, AF0, DRIVE_LOW), /* power: LOW = off */
GPIO42_BTUART_RXD,
GPIO43_BTUART_TXD,
GPIO44_BTUART_CTS,
GPIO45_BTUART_RTS,
/* MATRIX KEYPAD - different wake up source */
GPIO100_KP_MKIN_0,
GPIO99_KP_MKIN_5 | WAKEUP_ON_LEVEL_HIGH,
};
#endif /* CONFIG_MACH_CENTRO */
/******************************************************************************
* SD/MMC card controller
******************************************************************************/
#ifdef CONFIG_MACH_TREO680
GPIO17_PWM1_OUT, GPIO94_GPIO, GPIO95_GPIO, GPIO96_GPIO, GPIO97_GPIO, GPIO15_GPIO, GPIO18_RDY, GPIO0_GPIO, GPIO104_GPIO, GPIO12_GPIO, GPIO13_SSP2_TXD, GPIO14_SSP2_SFRM, MFP_CFG_OUT(GPIO19, AF1, DRIVE_LOW), GPIO22_SSP2_SCLK, GPIO81_SSP3_TXD, GPIO82_SSP3_RXD, GPIO83_SSP3_SFRM, GPIO84_SSP3_SCLK, GPIO20_GPIO, GPIO32_MMC_CLK, GPIO92_MMC_DAT_0, GPIO109_MMC_DAT_1, GPIO110_MMC_DAT_2, GPIO111_MMC_DAT_3, GPIO112_MMC_CMD, GPIO100_GPIO,
GPIO17_PWM1_OUT, /* or GPIO5 */ GPIO94_GPIO, /* GPIO6 */ GPIO95_GPIO, /* GPIO7 */ GPIO96_GPIO, /* GPIO8 */ GPIO97_GPIO, /* GPIO9 */ GPIO15_GPIO, /* EXP_IRQ */ GPIO18_RDY, /* EXP_WAIT */ GPIO0_GPIO, /* PWR_INT */ GPIO104_GPIO, /* PWR_OFF */ GPIO12_GPIO, /* touch irq */ GPIO13_SSP2_TXD, GPIO14_SSP2_SFRM, MFP_CFG_OUT(GPIO19, AF1, DRIVE_LOW),/* SSP2_SYSCLK */ GPIO22_SSP2_SCLK, GPIO81_SSP3_TXD, GPIO82_SSP3_RXD, GPIO83_SSP3_SFRM, GPIO84_SSP3_SCLK, GPIO20_GPIO, /* SDIO int */ GPIO32_MMC_CLK, GPIO92_MMC_DAT_0, GPIO109_MMC_DAT_1, GPIO110_MMC_DAT_2, GPIO111_MMC_DAT_3, GPIO112_MMC_CMD, GPIO100_GPIO, /* SD CD */
#include <mach/udc.h>
#include <mach/pxa27x-udc.h>
#include <mach/camera.h>
#include <mach/audio.h>
#include <media/soc_camera.h>
#include <mach/mioa701.h>
#include "generic.h"
#include "devices.h"
static unsigned long mioa701_pin_config[] = {
/* Mio global */
MIO_CFG_OUT(GPIO9_CHARGE_EN, AF0, DRIVE_LOW),
MIO_CFG_OUT(GPIO18_POWEROFF, AF0, DRIVE_LOW),
MFP_CFG_OUT(GPIO3, AF0, DRIVE_HIGH),
MFP_CFG_OUT(GPIO4, AF0, DRIVE_HIGH),
MIO_CFG_IN(GPIO80_MAYBE_CHARGE_VDROP, AF0),
/* Backlight PWM 0 */
GPIO16_PWM0_OUT,
/* MMC */
GPIO32_MMC_CLK,
GPIO92_MMC_DAT_0,
GPIO109_MMC_DAT_1,
GPIO110_MMC_DAT_2,
GPIO111_MMC_DAT_3,
GPIO112_MMC_CMD,
MIO_CFG_IN(GPIO78_SDIO_RO, AF0),
MIO_CFG_IN(GPIO15_SDIO_INSERT, AF0),
GPIO63_LCD_LDD_5,
GPIO64_LCD_LDD_6,
GPIO65_LCD_LDD_7,
GPIO66_LCD_LDD_8,
GPIO67_LCD_LDD_9,
GPIO68_LCD_LDD_10,
GPIO69_LCD_LDD_11,
GPIO70_LCD_LDD_12,
GPIO71_LCD_LDD_13,
GPIO72_LCD_LDD_14,
GPIO73_LCD_LDD_15,
GPIO74_LCD_FCLK,
GPIO75_LCD_LCLK,
GPIO76_LCD_PCLK,
GPIO77_LCD_BIAS,
MFP_CFG_OUT(GPIO16, AF0, DRIVE_LOW), /* backlight */
/* NIC */
GPIO33_nCS_5,
GPIO49_nPWE,
};
static int pcm027_devices_init(void)
{
void *cfi_iospace;
add_generic_device("smc91c111", DEVICE_ID_DYNAMIC, NULL, 0x14000300, 16,
IORESOURCE_MEM, NULL);
cfi_iospace = map_io_sections(0x0, (void *)0xe0000000, SZ_32M);
add_cfi_flash_device(DEVICE_ID_DYNAMIC, (unsigned long)cfi_iospace, SZ_32M, 0);
