/*********************************************************************
* @fn MT_NwkCommandProcessing
*
* @brief
*
* Process all the NWK commands that are issued by test tool
*
* @param cmd_id - Command ID
* @param len - Length of received SPI data message
* @param pData - pointer to received SPI data message
*
* @return void
*/
void MT_NwkCommandProcessing( uint16 cmd_id , byte len , byte *pData )
{
byte ret;
#if defined ( MT_NWK_FUNC )
uint8 dummyExPANID[Z_EXTADDR_LEN] = { 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF };
uint16 dstAddr;
#endif
#if defined ( MT_NWK_FUNC ) //NWK commands
byte attr;
byte index;
byte dataLen;
byte *dataPtr;
uint32 channelList;
byte databuf[SPI_RESP_LEN_NWK_DEFAULT + NWK_DEFAULT_GET_RESPONSE_LEN];
#if defined( ZDO_COORDINATOR )
uint16 panId;
#else
byte i,j;
#endif
#endif // MT_NWK_FUNC
len = SPI_0DATA_MSG_LEN + SPI_RESP_LEN_NWK_DEFAULT;
ret = (byte)ZSuccess;
switch (cmd_id)
{
#if defined( RTR_NWK )
case SPI_CMD_NLME_PERMIT_JOINING_REQ:
//The only information is PermitDuration
ret = (byte)NLME_PermitJoiningRequest( *pData );
break;
#endif
#if defined ( MT_NWK_FUNC ) //NWK commands
case SPI_CMD_NWK_INIT:
nwk_init( NWK_TaskID );
break;
case SPI_CMD_NLDE_DATA_REQ:
//First read the DstAddr
dstAddr = BUILD_UINT16( pData[1], pData[0] );
pData += sizeof( dstAddr );
//Get the NSDU details
dataLen = *pData++;
dataPtr = pData;
/* For now, skip a length of ZTEST_DEFAULT_DATA_LEN, instead of dataLen.
In future ZTOOL releases the data buffer will be only as long as dataLen */
//pData += dataLen;
pData += ZTEST_DEFAULT_DATA_LEN;
/* pData[0] = NSDUHandlde
pData[1] = NSDUHandleOptions
pData[3] = SecurityEnable
pData[4] = DiscoverRoute
pData[5] = RadiusCounter */
ret = (byte)MT_Nwk_DataRequest( dstAddr, dataLen, dataPtr, pData[0],
BUILD_UINT16( pData[2], pData[1] ),
pData[3], pData[4], pData[5]);
break;
#if defined( ZDO_COORDINATOR )
case SPI_CMD_NLME_INIT_COORD_REQ:
panId = BUILD_UINT16( pData[1], pData[0] );
MT_ReverseBytes( &pData[2], 4 );
channelList = osal_build_uint32( &pData[2], 4 );
ret = (byte)NLME_NetworkFormationRequest( panId, channelList, pData[6], pData[7],
pData[8], pData[9] );
break;
#endif // ZDO
#if defined( RTR_NWK )
case SPI_CMD_NLME_START_ROUTER_REQ:
// NOTE: first two parameters are not used, see NLMEDE.h for details
ret = (byte)NLME_StartRouterRequest( pData[0], pData[1], pData[2] );
break;
#endif // RTR
case SPI_CMD_NLME_JOIN_REQ:
ret = (byte)NLME_JoinRequest( dummyExPANID, BUILD_UINT16( pData[1], pData[0] ), pData[2], pData[3] );
if ( pData[3] & CAPINFO_RCVR_ON_IDLE )
{
// The receiver is on, turn network layer polling off.
NLME_SetPollRate( 0 );
NLME_SetQueuedPollRate( 0 );
NLME_SetResponseRate( 0 );
}
break;
case SPI_CMD_NLME_LEAVE_REQ:
{
NLME_LeaveReq_t req;
// if extAddr is all zeros, it means null pointer..
for( index = 0; ( ( index < Z_EXTADDR_LEN ) &&
( pData[index] == 0 ) ) ; index++ );
if ( index == Z_EXTADDR_LEN )
{
req.extAddr = NULL;
}
else
{
MT_ReverseBytes( pData, Z_EXTADDR_LEN );
req.extAddr = pData;
}
pData += Z_EXTADDR_LEN;
req.removeChildren = FALSE;
req.rejoin = FALSE;
req.silent = FALSE;
ret = (byte)NLME_LeaveReq( &req );
}
break;
case SPI_CMD_NLME_RESET_REQ:
//Its a direct call to reset NWK
ret = (byte)NLME_ResetRequest();
break;
case SPI_CMD_NLME_GET_REQ:
attr = *pData++;
index = *pData;
databuf[0] = (byte)NLME_GetRequest( (ZNwkAttributes_t )attr, index, &databuf[1] );
len = SPI_0DATA_MSG_LEN + SPI_RESP_LEN_NWK_DEFAULT + NWK_DEFAULT_GET_RESPONSE_LEN;
MT_BuildAndSendZToolResponse( len, (SPI_RESPONSE_BIT | SPI_CMD_NLME_GET_REQ),
(SPI_RESP_LEN_NWK_DEFAULT + NWK_DEFAULT_GET_RESPONSE_LEN), databuf );
return; // Don't return to this function
case SPI_CMD_NLME_SET_REQ:
ret = (byte)NLME_SetRequest( (ZNwkAttributes_t)pData[0], pData[1], &pData[2] );
osal_start_timerEx( ZDAppTaskID, ZDO_NWK_UPDATE_NV, 1000 );
break;
case SPI_CMD_NLME_NWK_DISC_REQ:
MT_ReverseBytes( pData, 4 );
ret = (byte)NLME_NetworkDiscoveryRequest( osal_build_uint32( pData, 4 ), pData[4] );
break;
#if !defined( ZDO_COORDINATOR )
case SPI_CMD_NLME_ORPHAN_JOIN_REQ:
// Channel list bit mask
MT_ReverseBytes( pData, 4 );
channelList = osal_build_uint32( pData, 4 );
// Count number of channels
j = attr = 0;
for ( i = 0; i < ED_SCAN_MAXCHANNELS; i++ )
{
if ( channelList & (1 << i) )
{
j++;
attr = i;
}
}
// If only one channel specified...
if ( j == 1 )
{
_NIB.scanDuration = pData[4];
_NIB.nwkLogicalChannel = attr;
_NIB.channelList = channelList;
if ( !_NIB.CapabilityInfo )
_NIB.CapabilityInfo = ZDO_Config_Node_Descriptor.CapabilityFlags;
devState = DEV_NWK_ORPHAN;
ret = (byte)NLME_OrphanJoinRequest( channelList, pData[4] );
}
else
ret = ZNwkInvalidParam;
break;
#endif // !ZDO
#if defined (RTR_NWK)
case SPI_CMD_NLME_ROUTE_DISC_REQ:
ret = (byte)NLME_RouteDiscoveryRequest( BUILD_UINT16( pData[1], pData[0] ), pData[2] );
break;
case SPI_CMD_NLME_DIRECT_JOIN_REQ:
MT_ReverseBytes( pData, 8 );
ret = (byte)NLME_DirectJoinRequest( pData, pData[8] );
break;
#endif // RTR
#endif // MT_NWK_FUNC
default:
ret = (byte)ZUnsupportedMode;
break;
}
#if defined ( MT_NWK_FUNC )
MT_SendSPIRespMsg( ret, cmd_id, len, SPI_RESP_LEN_NWK_DEFAULT );
#endif
(void)len;
(void)ret;
}
/*********************************************************************
* @fn MT_afCommandProcessing
*
* @brief
*
* Process all the AF commands that are issued by test tool
*
* @param cmd_id - Command ID
* @param len - Length of received SPI data message
* @param data - pointer to received SPI data message
*
* @return none
*/
void MT_afCommandProcessing( uint16 cmd_id , byte len , byte *pData )
{
byte i;
endPointDesc_t *epDesc;
uint8 af_stat = afStatus_FAILED;
switch (cmd_id)
{
case SPI_CMD_AF_INIT:
afInit();
//No response for this command
break;
case SPI_CMD_AF_REGISTER:
// First allocate memory for the AF structure epIntDesc
epDesc = ( endPointDesc_t * )
osal_mem_alloc( sizeof( endPointDesc_t ) );
if ( epDesc )
{
//Assemble the AF structures with the data received
//First the Endpoint
epDesc->simpleDesc = ( SimpleDescriptionFormat_t * )
osal_mem_alloc( sizeof( SimpleDescriptionFormat_t ) );
if ( epDesc->simpleDesc )
{
epDesc->endPoint = *pData++;
epDesc->simpleDesc->EndPoint = epDesc->endPoint;
epDesc->task_id = &MT_TaskID;
//Now for the simple description part
epDesc->simpleDesc->AppProfId = BUILD_UINT16( pData[1],pData[0]);
pData += sizeof( uint16 );
epDesc->simpleDesc->AppDeviceId = BUILD_UINT16( pData[1],pData[0]);
pData += sizeof( uint16 );
epDesc->simpleDesc->AppDevVer = (*pData++) & AF_APP_DEV_VER_MASK ;
epDesc->simpleDesc->Reserved = (*pData++) & AF_APP_FLAGS_MASK ;
epDesc->simpleDesc->AppNumInClusters = *pData++;
if (epDesc->simpleDesc->AppNumInClusters)
{
epDesc->simpleDesc->pAppInClusterList = (uint16 *)
osal_mem_alloc(ZTEST_DEFAULT_PARAM_LEN*sizeof(uint16));
for (i=0; i<ZTEST_DEFAULT_PARAM_LEN; i++) {
epDesc->simpleDesc->pAppInClusterList[i] = BUILD_UINT16(*pData, 0);
pData++;
}
}
else
{
pData += ZTEST_DEFAULT_PARAM_LEN;
}
epDesc->simpleDesc->AppNumOutClusters = *pData++;
if (epDesc->simpleDesc->AppNumOutClusters)
{
epDesc->simpleDesc->pAppOutClusterList = (uint16 *)
osal_mem_alloc(ZTEST_DEFAULT_PARAM_LEN*sizeof(uint16));
for (i=0; i<ZTEST_DEFAULT_PARAM_LEN; i++) {
epDesc->simpleDesc->pAppOutClusterList[i] = BUILD_UINT16(*pData, 0);
pData++;
}
}
else
{
pData += ZTEST_DEFAULT_PARAM_LEN;
}
epDesc->latencyReq = (afNetworkLatencyReq_t)*pData;
if ( afFindEndPointDesc( epDesc->endPoint ) == NULL )
{
af_stat = afRegister( epDesc );
}
}
else
{
osal_mem_free( epDesc );
af_stat = afStatus_MEM_FAIL;
}
}
len = SPI_0DATA_MSG_LEN + SPI_RESP_LEN_AF_DEFAULT;
MT_SendSPIRespMsg( af_stat, SPI_CMD_AF_REGISTER, len, SPI_RESP_LEN_AF_DEFAULT );
break;
case SPI_CMD_AF_SENDMSG:
{
#if ( AF_KVP_SUPPORT )
afKVPCommandFormat_t kvp;
afAddOrSend_t addOrSend;
byte frameType;
#else
endPointDesc_t *epDesc;
byte transId;
#endif
afAddrType_t dstAddr;
cId_t cId;
byte txOpts, radius, srcEP;
#if ( AF_KVP_SUPPORT )
frameType = *pData;
#endif
pData++;
txOpts = *pData++;
radius = *pData++;
// Fill the AF structures with the data received.
dstAddr.addrMode = afAddr16Bit;
dstAddr.addr.shortAddr = BUILD_UINT16( pData[1], pData[0] );
pData += 2;
dstAddr.endPoint = *pData++;
srcEP = *pData++;
cId = BUILD_UINT16( pData[1], pData[0] );
pData += 2;
#if ( AF_KVP_SUPPORT )
addOrSend = (afAddOrSend_t)(*pData++);
kvp.TransSeqNumber = *pData++;
kvp.CommandType = *pData++;
kvp.AttribDataType = *pData++;
kvp.AttribId = BUILD_UINT16( pData[1], pData[0] );
pData += 2;
kvp.ErrorCode = *pData++;
kvp.DataLength = *pData++;
kvp.Data = pData;
af_stat = afAddOrSendMessage( &dstAddr, srcEP, cId,
addOrSend, frameType, &kvp.TransSeqNumber,
kvp.CommandType, kvp.AttribDataType, kvp.AttribId, kvp.ErrorCode,
kvp.DataLength, kvp.Data, (txOpts & ~AF_DISCV_ROUTE),
(txOpts & AF_DISCV_ROUTE), radius );
#else
pData++;
transId = *pData++;
pData += 5;
len = *pData++;
epDesc = afFindEndPointDesc( srcEP );
if ( epDesc == NULL )
{
af_stat = afStatus_INVALID_PARAMETER;
}
else
{
af_stat = AF_DataRequest( &dstAddr, epDesc, cId, len, pData,
&transId, txOpts, radius );
}
#endif
len = SPI_0DATA_MSG_LEN + SPI_RESP_LEN_AF_DEFAULT;
MT_SendSPIRespMsg( af_stat, SPI_CMD_AF_SENDMSG,
len, SPI_RESP_LEN_AF_DEFAULT );
}
break;
}
}
/*********************************************************************
* @fn MT_ZdoCommandProcessing
*
* @brief
*
* Process all the ZDO commands that are issued by test tool
*
* @param cmd_id - Command ID
* @param len - Length of received SPI data message
* @param pData - pointer to received SPI data message
*
* @return void
*/
void MT_ZdoCommandProcessing( uint16 cmd_id , byte len , byte *pData )
{
byte i;
byte x;
byte ret;
byte attr;
byte attr1;
uint16 cID;
uint16 shortAddr;
uint16 uAttr;
byte *ptr;
byte *ptr1;
zAddrType_t devAddr;
zAddrType_t dstAddr;
byte respLen;
#if defined ( ZDO_MGMT_NWKDISC_REQUEST )
uint32 scanChans;
#endif
#if defined ( ZDO_USERDESCSET_REQUEST )
UserDescriptorFormat_t userDesc;
#endif
ret = UNSUPPORTED_COMMAND;
len = SPI_0DATA_MSG_LEN + SPI_RESP_LEN_ZDO_DEFAULT;
respLen = SPI_RESP_LEN_ZDO_DEFAULT;
switch (cmd_id)
{
case SPI_CMD_ZDO_AUTO_ENDDEVICEBIND_REQ:
i = *pData; // Get the endpoint/interface
ZDApp_SendEndDeviceBindReq( i );
//Since function type is void, report a succesful operation to the test tool
ret = ZSUCCESS;
break;
case SPI_CMD_ZDO_AUTO_FIND_DESTINATION_REQ:
i = *pData; // Get the endpoint/interface
ZDApp_AutoFindDestination( i );
//Since function type is void, report a succesful operation to the test tool
ret = ZSUCCESS;
break;
#if defined ( ZDO_NWKADDR_REQUEST )
case SPI_CMD_ZDO_NWK_ADDR_REQ:
// Copy and flip incoming 64-bit address
pData = zdo_MT_MakeExtAddr( &devAddr, pData );
ptr = (byte*)&devAddr.addr.extAddr;
attr = *pData++; // RequestType
attr1 = *pData++; // StartIndex
x = *pData;
ret = (byte)ZDP_NwkAddrReq( ptr, attr, attr1, x );
break;
#endif
#if defined ( ZDO_IEEEADDR_REQUEST )
case SPI_CMD_ZDO_IEEE_ADDR_REQ:
shortAddr = BUILD_UINT16( pData[1], pData[0] );
pData += sizeof( shortAddr );
attr = *pData++; // RequestType
attr1 = *pData++; // StartIndex
x = *pData; // SecuritySuite
ret = (byte)ZDP_IEEEAddrReq( shortAddr, attr, attr1, x );
break;
#endif
#if defined ( ZDO_NODEDESC_REQUEST )
case SPI_CMD_ZDO_NODE_DESC_REQ:
// destination address
devAddr.addrMode = Addr16Bit;
devAddr.addr.shortAddr = BUILD_UINT16( pData[1], pData[0] );
pData += 2;
// Network address of interest
shortAddr = BUILD_UINT16( pData[1], pData[0] );
pData += 2;
attr = *pData;
ret = (byte)ZDP_NodeDescReq( &devAddr, shortAddr, attr );
break;
#endif
#if defined ( ZDO_POWERDESC_REQUEST )
case SPI_CMD_ZDO_POWER_DESC_REQ:
// destination address
devAddr.addrMode = Addr16Bit;
devAddr.addr.shortAddr = BUILD_UINT16( pData[1], pData[0] );
pData += 2;
// Network address of interest
shortAddr = BUILD_UINT16( pData[1], pData[0] );
pData += 2;
attr = *pData;
ret = (byte)ZDP_PowerDescReq( &devAddr, shortAddr, attr );
break;
#endif
#if defined ( ZDO_SIMPLEDESC_REQUEST )
case SPI_CMD_ZDO_SIMPLE_DESC_REQ:
// destination address
devAddr.addrMode = Addr16Bit;
devAddr.addr.shortAddr = BUILD_UINT16( pData[1], pData[0] );
pData += 2;
// Network address of interest
shortAddr = BUILD_UINT16( pData[1], pData[0] );
pData += 2;
attr = *pData++; // endpoint/interface
attr1 = *pData; // SecuritySuite
ret = (byte)ZDP_SimpleDescReq( &devAddr, shortAddr, attr, attr1 );
break;
#endif
#if defined ( ZDO_ACTIVEEP_REQUEST )
case SPI_CMD_ZDO_ACTIVE_EPINT_REQ:
// destination address
devAddr.addrMode = Addr16Bit;
devAddr.addr.shortAddr = BUILD_UINT16( pData[1], pData[0] );
pData += 2;
// Network address of interest
shortAddr = BUILD_UINT16( pData[1], pData[0] );
pData += 2;
attr = *pData; // SecuritySuite
ret = (byte)ZDP_ActiveEPReq( &devAddr, shortAddr, attr );
break;
#endif
#if defined ( ZDO_MATCH_REQUEST )
case SPI_CMD_ZDO_MATCH_DESC_REQ:
{
uint16 inC[16], outC[16];
// destination address
devAddr.addrMode = Addr16Bit;
devAddr.addr.shortAddr = BUILD_UINT16( pData[1], pData[0] );
pData += 2;
// Network address of interest
shortAddr = BUILD_UINT16( pData[1], pData[0] );
pData += 2;
uAttr = BUILD_UINT16( pData[1], pData[0] ); // Profile ID
pData += 2;
attr = *pData++; // NumInClusters
for (i=0; i<16; ++i) {
inC[i] = BUILD_UINT16(pData[1], pData[0]);
pData += 2;
}
attr1 = *pData++; // NumOutClusters
for (i=0; i<16; ++i) {
outC[i] = BUILD_UINT16(pData[1], pData[0]);
pData += 2;
}
i = *pData; // SecuritySuite
ret = (byte)ZDP_MatchDescReq( &devAddr, shortAddr, uAttr,
attr, inC, attr1, outC, i );
}
break;
#endif
#if defined ( ZDO_COMPLEXDESC_REQUEST )
case SPI_CMD_ZDO_COMPLEX_DESC_REQ:
// destination address
devAddr.addrMode = Addr16Bit;
devAddr.addr.shortAddr = BUILD_UINT16( pData[1], pData[0] );
pData += 2;
// Network address of interest
shortAddr = BUILD_UINT16( pData[1], pData[0] );
pData += 2;
attr = *pData; // SecuritySuite
ret = (byte)ZDP_ComplexDescReq( &devAddr, shortAddr, attr );
break;
#endif
#if defined ( ZDO_USERDESC_REQUEST )
case SPI_CMD_ZDO_USER_DESC_REQ:
// destination address
devAddr.addrMode = Addr16Bit;
devAddr.addr.shortAddr = BUILD_UINT16( pData[1], pData[0] );
pData += 2;
// Network address of interest
shortAddr = BUILD_UINT16( pData[1], pData[0] );
pData += 2;
attr = *pData; // SecuritySuite
ret = (byte)ZDP_UserDescReq( &devAddr, shortAddr, attr );
break;
#endif
#if defined ( ZDO_ENDDEVICEBIND_REQUEST )
case SPI_CMD_ZDO_END_DEV_BIND_REQ:
//TODO: When ZTool supports 16 bits the code below will need to take it into account
{
uint16 inC[16], outC[16];
// destination address
devAddr.addrMode = Addr16Bit;
devAddr.addr.shortAddr = BUILD_UINT16( pData[1], pData[0] );
pData += 2;
// Network address of interest
shortAddr = BUILD_UINT16( pData[1], pData[0] );
pData += 2;
x = *pData++; // EPInt
uAttr = BUILD_UINT16( pData[1], pData[0] ); // Profile ID
pData += 2;
attr = *pData++; // NumInClusters
for (i=0; i<16; ++i) {
inC[i] = BUILD_UINT16(pData[1], pData[0]);
pData += 2;
}
attr1 = *pData++; // NumOutClusters
for (i=0; i<16; ++i) {
outC[i] = BUILD_UINT16(pData[1], pData[0]);
pData += 2;
}
i = *pData; // SecuritySuite
ret = (byte)ZDP_EndDeviceBindReq( &devAddr, shortAddr, x, uAttr,
attr, inC, attr1, outC, i );
}
break;
#endif
#if defined ( ZDO_BIND_UNBIND_REQUEST )
case SPI_CMD_ZDO_BIND_REQ:
// destination address
devAddr.addrMode = Addr16Bit;
devAddr.addr.shortAddr = BUILD_UINT16( pData[1], pData[0] );
pData += 2;
MT_ReverseBytes( pData, Z_EXTADDR_LEN );
ptr = pData; // SrcAddress
pData += Z_EXTADDR_LEN;
attr = *pData++; // SrcEPInt
cID = BUILD_UINT16( pData[1], pData[0]); // ClusterID
pData += 2;
dstAddr.addrMode = *pData++;
if ( NLME_GetProtocolVersion() == ZB_PROT_V1_0 )
dstAddr.addrMode = Addr64Bit;
MT_ReverseBytes( pData, Z_EXTADDR_LEN );
if ( dstAddr.addrMode == Addr64Bit )
{
ptr1 = pData; // DstAddress
osal_cpyExtAddr( dstAddr.addr.extAddr, ptr1 );
}
else
{
dstAddr.addr.shortAddr = BUILD_UINT16( pData[0], pData[1] );
}
// The short address occupies lsb two bytes
pData += Z_EXTADDR_LEN;
attr1 = *pData++; // DstEPInt
x = *pData; // SecuritySuite
#if defined ( REFLECTOR )
if ( devAddr.addr.shortAddr == _NIB.nwkDevAddress )
{
ZDApp_BindReqCB( 0, &devAddr, ptr, attr, cID, &dstAddr, attr1, x );
ret = ZSuccess;
}
else
#endif
ret = (byte)ZDP_BindReq( &devAddr, ptr, attr, cID, &dstAddr, attr1, x );
break;
#endif
#if defined ( ZDO_BIND_UNBIND_REQUEST )
case SPI_CMD_ZDO_UNBIND_REQ:
// destination address
devAddr.addrMode = Addr16Bit;
devAddr.addr.shortAddr = BUILD_UINT16( pData[1], pData[0] );
pData += 2;
MT_ReverseBytes( pData, Z_EXTADDR_LEN );
ptr = pData; // SrcAddress
pData += Z_EXTADDR_LEN;
attr = *pData++; // SrcEPInt
cID = BUILD_UINT16( pData[1], pData[0]); // ClusterID
pData += 2;
dstAddr.addrMode = *pData++;
if ( NLME_GetProtocolVersion() == ZB_PROT_V1_0 )
dstAddr.addrMode = Addr64Bit;
MT_ReverseBytes( pData, Z_EXTADDR_LEN );
if ( dstAddr.addrMode == Addr64Bit )
{
ptr1 = pData; // DstAddress
osal_cpyExtAddr( dstAddr.addr.extAddr, ptr1 );
}
else
{
dstAddr.addr.shortAddr = BUILD_UINT16( pData[0], pData[1] );
}
pData += Z_EXTADDR_LEN;
attr1 = *pData++; // DstEPInt
x = *pData; // SecuritySuite
#if defined ( REFLECTOR )
if ( devAddr.addr.shortAddr == _NIB.nwkDevAddress )
{
ZDApp_UnbindReqCB( 0, &devAddr, ptr, attr, cID, &dstAddr, attr1, x );
ret = ZSuccess;
}
else
#endif
{
ret = (byte)ZDP_UnbindReq( &devAddr, ptr, attr, cID, &dstAddr, attr1, x );
}
break;
#endif
#if defined ( ZDO_MGMT_NWKDISC_REQUEST )
case SPI_CMD_ZDO_MGMT_NWKDISC_REQ:
devAddr.addrMode = Addr16Bit;
devAddr.addr.shortAddr = BUILD_UINT16( pData[1], pData[0] );
pData += 2;
scanChans = BUILD_UINT32( pData[3], pData[2], pData[1], pData[0] );
ret = (byte)ZDP_MgmtNwkDiscReq( &devAddr, scanChans, pData[4], pData[5], false );
break;
#endif
#if defined ( ZDO_MGMT_LQI_REQUEST )
case SPI_CMD_ZDO_MGMT_LQI_REQ:
devAddr.addrMode = Addr16Bit;
devAddr.addr.shortAddr = BUILD_UINT16( pData[1], pData[0] );
ret = (byte)ZDP_MgmtLqiReq( &devAddr, pData[2], false );
break;
#endif
#if defined ( ZDO_MGMT_RTG_REQUEST )
case SPI_CMD_ZDO_MGMT_RTG_REQ:
devAddr.addrMode = Addr16Bit;
devAddr.addr.shortAddr = BUILD_UINT16( pData[1], pData[0] );
ret = (byte)ZDP_MgmtRtgReq( &devAddr, pData[2], false );
break;
#endif
#if defined ( ZDO_MGMT_BIND_REQUEST )
case SPI_CMD_ZDO_MGMT_BIND_REQ:
devAddr.addrMode = Addr16Bit;
devAddr.addr.shortAddr = BUILD_UINT16( pData[1], pData[0] );
ret = (byte)ZDP_MgmtBindReq( &devAddr, pData[2], false );
break;
#endif
#if defined ( ZDO_MGMT_JOINDIRECT_REQUEST )
case SPI_CMD_ZDO_MGMT_DIRECT_JOIN_REQ:
devAddr.addrMode = Addr16Bit;
devAddr.addr.shortAddr = BUILD_UINT16( pData[1], pData[0] );
MT_ReverseBytes( &pData[2], Z_EXTADDR_LEN );
ret = (byte)ZDP_MgmtDirectJoinReq( &devAddr,
&pData[2],
pData[2 + Z_EXTADDR_LEN],
false );
break;
#endif
#if defined ( ZDO_MGMT_LEAVE_REQUEST )
case SPI_CMD_ZDO_MGMT_LEAVE_REQ:
devAddr.addrMode = Addr16Bit;
devAddr.addr.shortAddr = BUILD_UINT16( pData[1], pData[0] );
MT_ReverseBytes( &pData[2], Z_EXTADDR_LEN );
ret = (byte)ZDP_MgmtLeaveReq( &devAddr, &pData[2], false );
break;
#endif
#if defined ( ZDO_MGMT_PERMIT_JOIN_REQUEST )
case SPI_CMD_ZDO_MGMT_PERMIT_JOIN_REQ:
devAddr.addrMode = Addr16Bit;
devAddr.addr.shortAddr = BUILD_UINT16( pData[1], pData[0] );
ret = (byte)ZDP_MgmtPermitJoinReq( &devAddr, pData[2], pData[3], false );
break;
#endif
#if defined ( ZDO_USERDESCSET_REQUEST )
case SPI_CMD_ZDO_USER_DESC_SET:
// destination address
devAddr.addrMode = Addr16Bit;
devAddr.addr.shortAddr = BUILD_UINT16( pData[1], pData[0] );
pData += 2;
// Network address of interest
shortAddr = BUILD_UINT16( pData[1], pData[0] );
pData += 2;
// User descriptor
userDesc.len = *pData++;
osal_memcpy( userDesc.desc, pData, userDesc.len );
pData += 16; // len of user desc
ret =(byte)ZDP_UserDescSet( &devAddr, shortAddr, &userDesc, pData[0] );
break;
#endif
#if defined ( ZDO_ENDDEVICE_ANNCE_REQUEST )
case SPI_CMD_ZDO_END_DEV_ANNCE:
// network address
shortAddr = BUILD_UINT16( pData[1], pData[0] );
pData += 2;
// extended address
ptr = pData;
MT_ReverseBytes( ptr, Z_EXTADDR_LEN );
pData += Z_EXTADDR_LEN;
// security
attr = *pData++;
ret = (byte)ZDP_EndDeviceAnnce( shortAddr, ptr, *pData, attr );
break;
#endif
#if defined (ZDO_SERVERDISC_REQUEST )
case SPI_CMD_ZDO_SERVERDISC_REQ:
// Service Mask
uAttr = BUILD_UINT16( pData[1], pData[0] );
pData += 2;
attr = *pData++; // Security suite
ret = (byte) ZDP_ServerDiscReq( uAttr, attr );
break;
#endif
#if defined (ZDO_NETWORKSTART_REQUEST )
case SPI_CMD_ZDO_NETWORK_START_REQ:
ret = ZDApp_StartUpFromApp( ZDAPP_STARTUP_AUTO );
break;
#endif
default:
break;
}
MT_SendSPIRespMsg( ret, cmd_id, len, respLen );
}
