matObj *OPS_GetMaterial(int *matTag, int *matType)
{
if (*matType == OPS_UNIAXIAL_MATERIAL_TYPE) {
UniaxialMaterial *theUniaxialMaterial = OPS_getUniaxialMaterial(*matTag);
if (theUniaxialMaterial != 0) {
UniaxialMaterial *theCopy = theUniaxialMaterial->getCopy();
// uniaxialMaterialObjectCount++;
// theUniaxialMaterials[uniaxialMaterialObjectCount] = theCopy;
matObject *theMatObject = new matObject;
theMatObject->tag = *matTag;
theMatObject->nParam = 1;
theMatObject->nState = 0;
theMatObject->theParam = new double[1];
// theMatObject->theParam[0] = uniaxialMaterialObjectCount;
theMatObject->theParam[0] = 1; // code for uniaxial material
theMatObject->tState = 0;
theMatObject->cState = 0;
theMatObject->matFunctPtr = OPS_InvokeMaterialObject;
theMatObject->matObjectPtr = theCopy;
return theMatObject;
}
fprintf(stderr,"getMaterial - no uniaxial material exists with tag %d\n", *matTag);
return 0;
} else if (*matType == OPS_SECTION_TYPE) {
fprintf(stderr,"getMaterial - not yet implemented for Section\n");
return 0;
} else {
// NDMaterial *theNDMaterial = theModelBuilder->getNDMaterial(*matTag);
// if (theNDMaterial != 0)
// theNDMaterial = theNDMaterial->getCopy(matType);
// else {
// fprintf(stderr,"getMaterial - no nd material exists with tag %d\n", *matTag);
// return 0;
// }
// if (theNDMaterial == 0) {
// fprintf(stderr,"getMaterial - material with tag %d cannot deal with %d\n", *matTag, matType);
// return 0;
// }
fprintf(stderr,"getMaterial - not yet implemented for nDMaterial\n");
return 0;
}
fprintf(stderr,"getMaterial - unknown material type\n");
return 0;
}
void* OPS_PathIndependentMaterial()
{
int numdata = OPS_GetNumRemainingInputArgs();
if (numdata < 2) {
opserr << "WARNING insufficient arguments\n";
opserr << "Want: uniaxialMaterial PathIndependent tag? matTag?" << endln;
return 0;
}
int tag[2];
numdata = 2;
if (OPS_GetIntInput(&numdata,tag) < 0) {
return 0;
}
UniaxialMaterial* theMat = OPS_getUniaxialMaterial(tag[1]);
if (theMat == 0) {
opserr << "WARNING material does not exist\n";
opserr << "material: " << tag[1];
opserr << "\nuniaxialMaterial PathIndependent: " << tag[0] << endln;
return 0;
}
UniaxialMaterial* mat = new PathIndependentMaterial(tag[0],*theMat);
if (mat == 0) {
opserr << "WARNING: failed to create PathIndependentmaterial material\n";
return 0;
}
return mat;
}
int OPS_testUniaxialMaterial()
{
if (OPS_GetNumRemainingInputArgs() != 1) {
opserr<<"testUniaxialMaterial - You must provide a material tag.\n";
return -1;
}
int tag;
int numData = 1;
if (OPS_GetIntInput(&numData, &tag) < 0) {
opserr<<"invalid int value\n";
return -1;
}
UniaxialMaterial* mat =OPS_getUniaxialMaterial(tag);
if (mat == 0) {
opserr<<"testUniaxialMaterial - Material Not Found.\n";
return -1;
}
theTestingUniaxialMaterial = mat;
return 0;
}
int
TclModelBuilder_addZeroLengthND(ClientData clientData, Tcl_Interp *interp,
int argc, TCL_Char **argv,
Domain *theDomain,
TclModelBuilder *theBuilder) {
int ndm = theBuilder->getNDM(); // the spatial dimension of the problem
//
// first scan the command line to obtain eleID, iNode, jNode, material ID's
// and their directions, and the orientation of ele xPrime and yPrime not
// along the global x and y axis
//
int eleTag, iNode, jNode;
// a quick check on number of args
if (argc < 6) {
opserr << "WARNING too few arguments %s %s %s\n" <<
"want - element zeroLengthND eleTag? iNode? jNode? " <<
"NDTag? <1DTag?>" <<
"<-orient x1? x2? x3? y1? y2? y3?>\n";
return TCL_ERROR;
}
// get the ele tag
if (Tcl_GetInt(interp, argv[2], &eleTag) != TCL_OK) {
opserr << "WARNING invalied eleTag " <<
argv[2] << " - element zeroLengthND eleTag? iNode? jNode? NDTag? <1DTag?> <-orient x1? x2? x3? y1? y2? y3?>\n";
return TCL_ERROR;
}
// get the two end nodes
if (Tcl_GetInt(interp, argv[3], &iNode) != TCL_OK) {
opserr << "WARNING invalied iNode " <<
argv[3] <<
"- element zeroLengthND eleTag? iNode? jNode? " <<
"NDTag? <1DTag?>" <<
"<-orient x1? x2? x3? y1? y2? y3?>\n";
return TCL_ERROR;
}
if (Tcl_GetInt(interp, argv[4], &jNode) != TCL_OK) {
opserr << "WARNING invalid jNode " <<
argv[4] << "- element zeroLengthND eleTag? iNode? jNode? " <<
"NDTag? <1DTag?> <-orient x1? x2? x3? y1? y2? y3?>\n";
return TCL_ERROR;
}
int NDTag;
if (Tcl_GetInt(interp, argv[5], &NDTag) != TCL_OK) {
opserr << "WARNING invalid NDTag %s %s %s %s\n" <<
argv[5] << "- element zeroLengthND eleTag? iNode? jNode? " <<
"NDTag? <1DTag?> <-orient x1? x2? x3? y1? y2? y3?>\n";
return TCL_ERROR;
}
UniaxialMaterial *the1DMat = 0;
int argi = 6;
if (argc > 6 && strcmp(argv[6],"-orient") != 0) {
int uniTag;
if (Tcl_GetInt(interp, argv[6], &uniTag) != TCL_OK) {
opserr << "WARNING invalid NDTag " <<
argv[5] << "- element zeroLengthND eleTag? iNode? jNode? " <<
"NDTag? <1DTag?> <-orient x1? x2? x3? y1? y2? y3?>\n";
return TCL_ERROR;
}
the1DMat = OPS_getUniaxialMaterial(uniTag);
if (the1DMat == 0)
opserr << "WARNING UniaxialMaterial " << uniTag << " not found in model, proceeding without\n";
argi = 7;
}
// create the vectors for the element orientation
Vector x(3); x(0) = 1.0; x(1) = 0.0; x(2) = 0.0;
Vector y(3); y(0) = 0.0; y(1) = 1.0; y(2) = 0.0;
// finally check the command line to see if user specified orientation
if (argi < argc) {
if (strcmp(argv[argi],"-orient") == 0) {
if (argc < (argi+7)) {
opserr << "WARNING not enough parameters after -orient flag for ele " <<
eleTag << "- element zeroLengthND eleTag? iNode? jNode? " <<
"NDTag? <1DTag?> <-orient x1? x2? x3? y1? y2? y3?>\n";
return TCL_ERROR;
} else {
argi++;
double value;
// read the x values
for (int i=0; i<3; i++) {
if (Tcl_GetDouble(interp, argv[argi], &value) != TCL_OK) {
opserr << "WARNING invalid -orient value for ele " <<
eleTag << argv[argi] << "- element zeroLengthND eleTag? iNode? jNode? " <<
"NDTag? <1DTag?> <-orient x1? x2? x3? y1? y2? y3?>\n";
return TCL_ERROR;
} else {
argi++;
x(i) = value;
}
}
// read the y values
for (int j=0; j<3; j++) {
if (Tcl_GetDouble(interp, argv[argi], &value) != TCL_OK) {
opserr << "WARNING invalid -orient value for ele " <<
eleTag << " " << argv[argi] <<
"- element zeroLengthND eleTag? iNode? jNode? " <<
"NDTag? <1DTag?> <-orient x1? x2? x3? y1? y2? y3?>\n";
return TCL_ERROR;
} else {
argi++;
y(j) = value;
}
}
}
}
}
//
// now we create the element and add it to the domain
//
NDMaterial *theNDMat = OPS_getNDMaterial(NDTag);
if (theNDMat == 0) {
opserr << "zeroLengthND -- no NDMaterial with tag " << NDTag << " exists in Domain\n";
return TCL_ERROR;
}
Element *theEle = 0;
if (the1DMat == 0)
theEle = new ZeroLengthND(eleTag, ndm, iNode, jNode, x, y, *theNDMat);
else
theEle = new ZeroLengthND(eleTag, ndm, iNode, jNode, x, y, *theNDMat, *the1DMat);
if (theEle == 0)
return TCL_ERROR;
if (theDomain->addElement(theEle) == false)
return TCL_ERROR;
return TCL_OK;
}
int
TclModelBuilder_addZeroLength(ClientData clientData, Tcl_Interp *interp,
int argc, TCL_Char **argv,
Domain *theDomain,
TclModelBuilder *theBuilder) {
int ndm = theBuilder->getNDM(); // the spatial dimension of the problem
//
// first scan the command line to obtain eleID, iNode, jNode, material ID's
// and their directions, and the orientation of ele xPrime and yPrime not
// along the global x and y axis
//
int eleTag, iNode, jNode;
// a quick check on number of args
if (argc < 9) {
opserr << "WARNING too few arguments " <<
"want - element ZeroLength eleTag? iNode? jNode? " <<
"-mat matID1? ... -dir dirMat1? .. " <<
"<-orient x1? x2? x3? y1? y2? y3?>\n";
return TCL_ERROR;
}
// get the ele tag
if (Tcl_GetInt(interp, argv[2], &eleTag) != TCL_OK) {
opserr << "WARNING invalied eleTag " << argv[2] <<
"- element ZeroLength eleTag? iNode? jNode? -mat matID1? ... -dir dirMat1? .. " <<
"<-orient x1? x2? x3? y1? y2? y3?>\n";
return TCL_ERROR;
}
// get the two end nodes
if (Tcl_GetInt(interp, argv[3], &iNode) != TCL_OK) {
opserr << "WARNING invalied iNode " << argv[3] <<
"- element ZeroLength eleTag? iNode? jNode? " <<
"-mat matID1? ... -dir dirMat1? .. " <<
"<-orient x1? x2? x3? y1? y2? y3?>\n";
return TCL_ERROR;
}
if (Tcl_GetInt(interp, argv[4], &jNode) != TCL_OK) {
opserr << "WARNING invalid jNode " << argv[4] <<
"- element ZeroLength eleTag? iNode? jNode? " <<
"-mat matID1? ... -dir dirMat1? .. " <<
"<-orient x1? x2? x3? y1? y2? y3?>\n";
return TCL_ERROR;
}
// create an array of material pointers, to do this first count
// the materials to create the array then get matID's and from ModelBuilder
// obtain pointers to the material objects
// read the number of materials
int numMat = 0;
if (strcmp(argv[5],"-mat") != 0) {
opserr << "WARNING expecting -mat flag %s %s %s %s\n" << argv[5] <<
"- element ZeroLength eleTag? iNode? jNode? " <<
"-mat matID1? ... -dir dirMat1? .. " <<
"<-orient x1? x2? x3? y1? y2? y3?>\n";
return TCL_ERROR;
}
int argi = 6;
while ((argi < argc) && (strcmp(argv[argi],"-dir") != 0)) {
numMat++;
argi++;
}
if (argi == argc) { // check we encountered the -dirn flag
opserr << "WARNING no -dirn flag encountered " <<
"- element ZeroLength eleTag? iNode? jNode? " <<
"-mat matID1? ... -dir dirMat1? .. " <<
"<-orient x1? x2? x3? y1? y2? y3?>\n";
return TCL_ERROR;
}
if (numMat == 0) {
opserr << "WARNING no materials specified " <<
"- element ZeroLength eleTag? iNode? jNode? " <<
"-mat <matID1? ... -dir irMat1? .. " <<
"<-orient x1? x2? x3? y1? y2? y3?>\n";
return TCL_ERROR;
}
// create the array
UniaxialMaterial **theMats = new UniaxialMaterial *[numMat];
UniaxialMaterial **theDampMats = new UniaxialMaterial *[numMat];
if (theMats == 0) {
opserr << "WARNING out of memory " <<
"creating material array of size " << numMat <<
"- element ZeroLength eleTag? iNode? jNode? " <<
"-mat matID1? ... -dir dirMat1? .. " <<
"<-orient x1? x2? x3? y1? y2? y3?>\n";
return TCL_ERROR;
}
// fill in the material array
argi=6;
for (int i=0; i<numMat; i++) {
theDampMats[i] = 0;
int matID;
// read the material tag
if (Tcl_GetInt(interp, argv[argi], &matID) != TCL_OK) {
opserr << "WARNING invalid matID " << argv[argi] <<
"- element ZeroLength eleTag? iNode? jNode? " <<
"-mat matID1? ... -dir dirMat1? .. " <<
"<-orient x1? x2? x3? y1? y2? y3?>\n";
delete [] theMats;
return TCL_ERROR;
} else {
// get a pointer to the material from the modelbuilder
argi++;
UniaxialMaterial *theMat = OPS_getUniaxialMaterial(matID);
if (theMat == 0) {
opserr << "WARNING no material " << matID <<
"exitsts - element ZeroLength eleTag? iNode? jNode? " <<
"-mat matID1? ... -dir dirMat1? .. " <<
"<-orient x1? x2? x3? y1? y2? y3?>\n" ;
delete [] theMats;
return TCL_ERROR;
} else {
// add the material to the array
theMats[i] = theMat;
}
}
}
// now read the dirn ID's for the materials added
argi = 6 + numMat;
if (strcmp(argv[argi],"-dir") != 0) {
opserr << "WARNING expecting -dirn flag " << argv[argi] <<
"- element ZeroLength eleTag? iNode? jNode? " <<
"-mat matID1? ... -dir dirMat1? .. " <<
"<-orient x1? x2? x3? y1? y2? y3?>\n";
delete [] theMats;
return TCL_ERROR;
}
if ((argi + numMat) > argc) {
opserr << "WARNING not enough directions provided for ele " << eleTag <<
"- element ZeroLength eleTag? iNode? jNode? " <<
"-mat matID1? ... -dir dirMat1? .. " <<
"<-orient x1? x2? x3? y1? y2? y3?>\n";
delete [] theMats;
return TCL_ERROR;
}
// create an ID to hold the directions
ID theDirns(numMat);
argi++;
int dirnID;
// read the dirn identifiers
for (int j=0; j<numMat; j++) {
if (Tcl_GetInt(interp, argv[argi], &dirnID) != TCL_OK) {
opserr << "WARNING invalid directiion " << argv[argi] <<
"- element ZeroLength eleTag? iNode? jNode? " <<
"-mat matID1? ... -dir dirMat1? .. " <<
"<-orient x1? x2? x3? y1? y2? y3?>\n";
delete [] theMats;
return TCL_ERROR;
} else {
theDirns[j] = dirnID -1; // the minus g3 to C++
argi++;
}
}
// create the vectors for the element orientation
Vector x(3); x(0) = 1.0; x(1) = 0.0; x(2) = 0.0;
Vector y(3); y(0) = 0.0; y(1) = 1.0; y(2) = 0.0;
// finally check the command line to see if user specified orientation
int doRayleighDamping = 0;
while (argi < argc) {
if (strcmp(argv[argi],"-orient") == 0) {
if (argc < (argi+7)) {
opserr << "WARNING not enough parameters after -orient flag for ele " << eleTag <<
"- element ZeroLength eleTag? iNode? jNode? " <<
"-mat matID1? ... -dir dirMat1? .. " <<
"<-orient x1? x2? x3? y1? y2? y3?>\n";
delete [] theMats;
return TCL_ERROR;
} else {
argi++;
double value;
// read the x values
for (int i=0; i<3; i++) {
if (Tcl_GetDouble(interp, argv[argi], &value) != TCL_OK) {
opserr << "WARNING invalid -orient value for ele " << eleTag << argv[i] <<
"- element ZeroLength eleTag? iNode? jNode? " <<
"-mat matID1? ... -dir dirMat1? .. " <<
"<-orient x1? x2? x3? y1? y2? y3?>\n";
delete [] theMats;
return TCL_ERROR;
} else {
argi++;
x(i) = value;
}
}
// read the y values
for (int j=0; j<3; j++) {
if (Tcl_GetDouble(interp, argv[argi], &value) != TCL_OK) {
opserr << "WARNING invalid -orient value for ele " <<
eleTag << argv[argi] <<
"- element ZeroLength eleTag? iNode? jNode? " <<
"-mat matID1? ... -dir dirMat1? .. " <<
"<-orient x1? x2? x3? y1? y2? y3?>\n";
delete [] theMats;
return TCL_ERROR;
} else {
argi++;
y(j) = value;
}
}
}
argi++;
} else if (strcmp(argv[argi],"-doRayleigh") == 0) {
doRayleighDamping = 1;
argi++;
if (argi < argc)
if ((Tcl_GetInt(interp, argv[argi], &doRayleighDamping) == TCL_OK))
argi++;
} else if (strcmp(argv[argi],"-dampMats") == 0) {
doRayleighDamping = 2;
argi++;
for (int i=0; i<numMat; i++) {
int matID;
// read the material tag
if (Tcl_GetInt(interp, argv[argi], &matID) != TCL_OK) {
opserr << "WARNING invalid matID " << argv[argi] <<
"- element ZeroLength eleTag? iNode? jNode? " <<
"-mat matID1? ... -dir dirMat1? .. " <<
"<-orient x1? x2? x3? y1? y2? y3?>\n";
delete [] theMats;
return TCL_ERROR;
} else {
UniaxialMaterial *theMat = OPS_getUniaxialMaterial(matID);
if (theMat == 0) {
opserr << "WARNING no material " << matID <<
"exitsts - element ZeroLength eleTag? iNode? jNode? " <<
"-mat matID1? ... -dir dirMat1? .. " <<
"<-orient x1? x2? x3? y1? y2? y3?>\n" ;
delete [] theMats;
return TCL_ERROR;
} else {
theDampMats[i] = theMat;
}
}
argi++;
}
} else
argi++;
}
//
// now we create the element and add it to the domain
//
Element *theEle;
if (doRayleighDamping != 2)
theEle = new ZeroLength(eleTag, ndm, iNode, jNode, x, y, numMat, theMats, theDirns, doRayleighDamping);
else
theEle = new ZeroLength(eleTag, ndm, iNode, jNode, x, y, numMat, theMats, theDampMats, theDirns, doRayleighDamping);
if (theEle == 0) {
delete [] theMats;
return TCL_ERROR;
}
if (theDomain->addElement(theEle) == false) {
delete [] theMats;
return TCL_ERROR;
}
// return the memory we stole and return OK
delete [] theMats;
delete [] theDampMats;
return TCL_OK;
}
int TclModelBuilder_addElastomericBearingPlasticity(ClientData clientData,
Tcl_Interp *interp, int argc, TCL_Char **argv, Domain *theTclDomain,
TclModelBuilder *theTclBuilder, int eleArgStart)
{
// ensure the destructor has not been called
if (theTclBuilder == 0) {
opserr << "WARNING builder has been destroyed - elastomericBearing\n";
return TCL_ERROR;
}
Element *theElement = 0;
int ndm = theTclBuilder->getNDM();
int ndf = theTclBuilder->getNDF();
int tag;
if (ndm == 2) {
// check plane frame problem has 3 dof per node
if (ndf != 3) {
opserr << "WARNING invalid ndf: " << ndf;
opserr << ", for plane problem need 3 - elastomericBearing\n";
return TCL_ERROR;
}
// check the number of arguments is correct
if ((argc-eleArgStart) < 13) {
opserr << "WARNING insufficient arguments\n";
printCommand(argc, argv);
opserr << "Want: elastomericBearing eleTag iNode jNode kInit fy alpha1 alpha2 mu -P matTag -Mz matTag <-orient x1 x2 x3 y1 y2 y3> <-shearDist sDratio> <-doRayleigh> <-mass m>\n";
return TCL_ERROR;
}
// get the id and end nodes
int iNode, jNode, matTag, argi, j;
int recvMat = 0;
double kInit, fy, alpha1;
double alpha2 = 0.0;
double mu = 2.0;
double shearDistI = 0.5;
int doRayleigh = 0;
double mass = 0.0;
if (Tcl_GetInt(interp, argv[1+eleArgStart], &tag) != TCL_OK) {
opserr << "WARNING invalid elastomericBearing eleTag\n";
return TCL_ERROR;
}
if (Tcl_GetInt(interp, argv[2+eleArgStart], &iNode) != TCL_OK) {
opserr << "WARNING invalid iNode\n";
opserr << "elastomericBearing element: " << tag << endln;
return TCL_ERROR;
}
if (Tcl_GetInt(interp, argv[3+eleArgStart], &jNode) != TCL_OK) {
opserr << "WARNING invalid jNode\n";
opserr << "elastomericBearing element: " << tag << endln;
return TCL_ERROR;
}
if (Tcl_GetDouble(interp, argv[4+eleArgStart], &kInit) != TCL_OK) {
opserr << "WARNING invalid kInit\n";
opserr << "elastomericBearing element: " << tag << endln;
return TCL_ERROR;
}
if (Tcl_GetDouble(interp, argv[5+eleArgStart], &fy) != TCL_OK) {
opserr << "WARNING invalid fy\n";
opserr << "elastomericBearing element: " << tag << endln;
return TCL_ERROR;
}
if (Tcl_GetDouble(interp, argv[6+eleArgStart], &alpha1) != TCL_OK) {
opserr << "WARNING invalid alpha1\n";
opserr << "elastomericBearing element: " << tag << endln;
return TCL_ERROR;
}
if (Tcl_GetDouble(interp, argv[7+eleArgStart], &alpha2) != TCL_OK) {
opserr << "WARNING invalid alpha2\n";
opserr << "elastomericBearing element: " << tag << endln;
return TCL_ERROR;
}
if (Tcl_GetDouble(interp, argv[8+eleArgStart], &mu) != TCL_OK) {
opserr << "WARNING invalid mu\n";
opserr << "elastomericBearing element: " << tag << endln;
return TCL_ERROR;
}
UniaxialMaterial *theMaterials[2];
for (int i = 9+eleArgStart; i < argc; i++) {
if (i+1 < argc && strcmp(argv[i], "-P") == 0) {
theMaterials[0] = 0;
if (Tcl_GetInt(interp, argv[i+1], &matTag) != TCL_OK) {
opserr << "WARNING invalid matTag\n";
opserr << "elastomericBearing element: " << tag << endln;
return TCL_ERROR;
}
theMaterials[0] = OPS_getUniaxialMaterial(matTag);
if (theMaterials[0] == 0) {
opserr << "WARNING material model not found\n";
opserr << "uniaxialMaterial: " << matTag << endln;
opserr << "elastomericBearing element: " << tag << endln;
return TCL_ERROR;
}
recvMat++;
}
}
for (int i = 9+eleArgStart; i < argc; i++) {
if (i+1 < argc && strcmp(argv[i], "-Mz") == 0) {
if (Tcl_GetInt(interp, argv[i+1], &matTag) != TCL_OK) {
opserr << "WARNING invalid matTag\n";
opserr << "elastomericBearing element: " << tag << endln;
return TCL_ERROR;
}
theMaterials[1] = OPS_getUniaxialMaterial(matTag);
if (theMaterials[1] == 0) {
opserr << "WARNING material model not found\n";
opserr << "uniaxialMaterial: " << matTag << endln;
opserr << "elastomericBearing element: " << tag << endln;
return TCL_ERROR;
}
recvMat++;
}
}
if (recvMat != 2) {
opserr << "WARNING wrong number of materials\n";
opserr << "got " << recvMat << " materials, but want 2 materials\n";
opserr << "elastomericBearing element: " << tag << endln;
return TCL_ERROR;
}
// check for optional arguments
Vector x = 0;
Vector y = 0;
for (int i = 9+eleArgStart; i < argc; i++) {
if (strcmp(argv[i],"-orient") == 0) {
j = i+1;
int numOrient = 0;
while (j < argc &&
strcmp(argv[j],"-shearDist") != 0 &&
strcmp(argv[j],"-doRayleigh") != 0 &&
strcmp(argv[j],"-mass") != 0) {
numOrient++;
j++;
}
if (numOrient == 6) {
argi = i+1;
x.resize(3);
y.resize(3);
double value;
// read the x values
for (j=0; j<3; j++) {
if (Tcl_GetDouble(interp, argv[argi], &value) != TCL_OK) {
opserr << "WARNING invalid -orient value\n";
opserr << "elastomericBearing element: " << tag << endln;
return TCL_ERROR;
} else {
argi++;
x(j) = value;
}
}
// read the y values
for (j=0; j<3; j++) {
if (Tcl_GetDouble(interp, argv[argi], &value) != TCL_OK) {
opserr << "WARNING invalid -orient value\n";
opserr << "elastomericBearing element: " << tag << endln;
return TCL_ERROR;
} else {
argi++;
y(j) = value;
}
}
}
else {
opserr << "WARNING insufficient arguments after -orient flag\n";
opserr << "elastomericBearing element: " << tag << endln;
return TCL_ERROR;
}
}
}
for (int i = 9+eleArgStart; i < argc; i++) {
if (i+1 < argc && strcmp(argv[i], "-shearDist") == 0) {
if (Tcl_GetDouble(interp, argv[i+1], &shearDistI) != TCL_OK) {
opserr << "WARNING invalid -shearDist value\n";
opserr << "elastomericBearing element: " << tag << endln;
return TCL_ERROR;
}
}
}
for (int i = 9+eleArgStart; i < argc; i++) {
if (strcmp(argv[i], "-doRayleigh") == 0)
doRayleigh = 1;
}
for (int i = 9+eleArgStart; i < argc; i++) {
if (i+1 < argc && strcmp(argv[i], "-mass") == 0) {
if (Tcl_GetDouble(interp, argv[i+1], &mass) != TCL_OK) {
opserr << "WARNING invalid -mass value\n";
opserr << "elastomericBearing element: " << tag << endln;
return TCL_ERROR;
}
}
}
// now create the elastomericBearing
theElement = new ElastomericBearingPlasticity2d(tag, iNode, jNode, kInit, fy,
alpha1, theMaterials, y, x, alpha2, mu, shearDistI, doRayleigh, mass);
if (theElement == 0) {
opserr << "WARNING ran out of memory creating element\n";
opserr << "elastomericBearing element: " << tag << endln;
return TCL_ERROR;
}
// then add the elastomericBearing to the domain
if (theTclDomain->addElement(theElement) == false) {
opserr << "WARNING could not add element to the domain\n";
opserr << "elastomericBearing element: " << tag << endln;
delete theElement;
return TCL_ERROR;
}
}
else if (ndm == 3) {
// check space frame problem has 6 dof per node
if (ndf != 6) {
opserr << "WARNING invalid ndf: " << ndf;
opserr << ", for space problem need 6 - elastomericBearing \n";
return TCL_ERROR;
}
// check the number of arguments is correct
if ((argc-eleArgStart) < 17) {
opserr << "WARNING insufficient arguments\n";
printCommand(argc, argv);
opserr << "Want: elastomericBearing eleTag iNode jNode kInit fy alpha1 alpha2 mu -P matTag -T matTag -My matTag -Mz matTag <-orient <x1 x2 x3> y1 y2 y3> <-shearDist sDratio> <-mass m>\n";
return TCL_ERROR;
}
// get the id and end nodes
int iNode, jNode, matTag, argi, i, j;
int recvMat = 0;
double kInit, fy, alpha1;
double alpha2 = 0.0;
double mu = 2.0;
double shearDistI = 0.5;
int doRayleigh = 0;
double mass = 0.0;
if (Tcl_GetInt(interp, argv[1+eleArgStart], &tag) != TCL_OK) {
opserr << "WARNING invalid elastomericBearing eleTag\n";
return TCL_ERROR;
}
if (Tcl_GetInt(interp, argv[2+eleArgStart], &iNode) != TCL_OK) {
opserr << "WARNING invalid iNode\n";
opserr << "elastomericBearing element: " << tag << endln;
return TCL_ERROR;
}
if (Tcl_GetInt(interp, argv[3+eleArgStart], &jNode) != TCL_OK) {
opserr << "WARNING invalid jNode\n";
opserr << "elastomericBearing element: " << tag << endln;
return TCL_ERROR;
}
if (Tcl_GetDouble(interp, argv[4+eleArgStart], &kInit) != TCL_OK) {
opserr << "WARNING invalid kInit\n";
opserr << "elastomericBearing element: " << tag << endln;
return TCL_ERROR;
}
if (Tcl_GetDouble(interp, argv[5+eleArgStart], &fy) != TCL_OK) {
opserr << "WARNING invalid fy\n";
opserr << "elastomericBearing element: " << tag << endln;
return TCL_ERROR;
}
if (Tcl_GetDouble(interp, argv[6+eleArgStart], &alpha1) != TCL_OK) {
opserr << "WARNING invalid alpha1\n";
opserr << "elastomericBearing element: " << tag << endln;
return TCL_ERROR;
}
if (Tcl_GetDouble(interp, argv[7+eleArgStart], &alpha2) != TCL_OK) {
opserr << "WARNING invalid alpha2\n";
opserr << "elastomericBearing element: " << tag << endln;
return TCL_ERROR;
}
if (Tcl_GetDouble(interp, argv[8+eleArgStart], &mu) != TCL_OK) {
opserr << "WARNING invalid mu\n";
opserr << "elastomericBearing element: " << tag << endln;
return TCL_ERROR;
}
UniaxialMaterial *theMaterials[4];
for (i = 9+eleArgStart; i < argc; i++) {
if (i+1 < argc && strcmp(argv[i], "-P") == 0) {
if (Tcl_GetInt(interp, argv[i+1], &matTag) != TCL_OK) {
opserr << "WARNING invalid axial matTag\n";
opserr << "elastomericBearing element: " << tag << endln;
return TCL_ERROR;
}
theMaterials[0] = OPS_getUniaxialMaterial(matTag);
if (theMaterials[0] == 0) {
opserr << "WARNING material model not found\n";
opserr << "uniaxialMaterial: " << matTag << endln;
opserr << "elastomericBearing element: " << tag << endln;
return TCL_ERROR;
}
recvMat++;
}
}
for (i = 9+eleArgStart; i < argc; i++) {
if (i+1 < argc && strcmp(argv[i], "-T") == 0) {
if (Tcl_GetInt(interp, argv[i+1], &matTag) != TCL_OK) {
opserr << "WARNING invalid torsional matTag\n";
opserr << "elastomericBearing element: " << tag << endln;
return TCL_ERROR;
}
theMaterials[1] = OPS_getUniaxialMaterial(matTag);
if (theMaterials[1] == 0) {
opserr << "WARNING material model not found\n";
opserr << "uniaxialMaterial: " << matTag << endln;
opserr << "elastomericBearing element: " << tag << endln;
return TCL_ERROR;
}
recvMat++;
}
}
for (i = 9+eleArgStart; i < argc; i++) {
if (i+1 < argc && strcmp(argv[i], "-My") == 0) {
if (Tcl_GetInt(interp, argv[i+1], &matTag) != TCL_OK) {
opserr << "WARNING invalid moment y matTag\n";
opserr << "elastomericBearing element: " << tag << endln;
return TCL_ERROR;
}
theMaterials[2] = OPS_getUniaxialMaterial(matTag);
if (theMaterials[2] == 0) {
opserr << "WARNING material model not found\n";
opserr << "uniaxialMaterial: " << matTag << endln;
opserr << "elastomericBearing element: " << tag << endln;
return TCL_ERROR;
}
recvMat++;
}
}
for (i = 9+eleArgStart; i < argc; i++) {
if (i+1 < argc && strcmp(argv[i], "-Mz") == 0) {
if (Tcl_GetInt(interp, argv[i+1], &matTag) != TCL_OK) {
opserr << "WARNING invalid moment z matTag\n";
opserr << "elastomericBearing element: " << tag << endln;
return TCL_ERROR;
}
theMaterials[3] = OPS_getUniaxialMaterial(matTag);
if (theMaterials[3] == 0) {
opserr << "WARNING material model not found\n";
opserr << "uniaxialMaterial: " << matTag << endln;
opserr << "elastomericBearing element: " << tag << endln;
return TCL_ERROR;
}
recvMat++;
}
}
if (recvMat != 4) {
opserr << "WARNING wrong number of materials\n";
opserr << "got " << recvMat << " materials, but want 4 materials\n";
opserr << "elastomericBearing element: " << tag << endln;
return TCL_ERROR;
}
// check for optional arguments
Vector x(0);
Vector y(3); y(0) = 0.0; y(1) = 1.0; y(2) = 0.0;
for (i = 9+eleArgStart; i < argc; i++) {
if (strcmp(argv[i],"-orient") == 0) {
j = i+1;
int numOrient = 0;
while (j < argc &&
strcmp(argv[j],"-shearDist") != 0 &&
strcmp(argv[j],"-doRayleigh") != 0 &&
strcmp(argv[j],"-mass") != 0) {
numOrient++;
j++;
}
if (numOrient == 3) {
argi = i+1;
double value;
// read the y values
for (j=0; j<3; j++) {
if (Tcl_GetDouble(interp, argv[argi], &value) != TCL_OK) {
opserr << "WARNING invalid -orient value\n";
opserr << "elastomericBearing element: " << tag << endln;
return TCL_ERROR;
} else {
argi++;
y(j) = value;
}
}
}
else if (numOrient == 6) {
argi = i+1;
x.resize(3);
double value;
// read the x values
for (j=0; j<3; j++) {
if (Tcl_GetDouble(interp, argv[argi], &value) != TCL_OK) {
opserr << "WARNING invalid -orient value\n";
opserr << "elastomericBearing element: " << tag << endln;
return TCL_ERROR;
} else {
argi++;
x(j) = value;
}
}
// read the y values
for (j=0; j<3; j++) {
if (Tcl_GetDouble(interp, argv[argi], &value) != TCL_OK) {
opserr << "WARNING invalid -orient value\n";
opserr << "elastomericBearing element: " << tag << endln;
return TCL_ERROR;
} else {
argi++;
y(j) = value;
}
}
}
else {
opserr << "WARNING insufficient arguments after -orient flag\n";
opserr << "elastomericBearing element: " << tag << endln;
return TCL_ERROR;
}
}
}
for (i = 9+eleArgStart; i < argc; i++) {
if (i+1 < argc && strcmp(argv[i], "-shearDist") == 0) {
if (Tcl_GetDouble(interp, argv[i+1], &shearDistI) != TCL_OK) {
opserr << "WARNING invalid -shearDist value\n";
opserr << "elastomericBearing element: " << tag << endln;
return TCL_ERROR;
}
}
}
for (i = 9+eleArgStart; i < argc; i++) {
if (i+1 < argc && strcmp(argv[i], "-doRayleigh") == 0)
doRayleigh = 1;
}
for (i = 9+eleArgStart; i < argc; i++) {
if (i+1 < argc && strcmp(argv[i], "-mass") == 0) {
if (Tcl_GetDouble(interp, argv[i+1], &mass) != TCL_OK) {
opserr << "WARNING invalid -mass value\n";
opserr << "elastomericBearing element: " << tag << endln;
return TCL_ERROR;
}
}
}
// now create the elastomericBearing
theElement = new ElastomericBearingPlasticity3d(tag, iNode, jNode, kInit, fy,
alpha1, theMaterials, y, x, alpha2, mu, shearDistI, doRayleigh, mass);
if (theElement == 0) {
opserr << "WARNING ran out of memory creating element\n";
opserr << "elastomericBearing element: " << tag << endln;
return TCL_ERROR;
}
// then add the elastomericBearing to the domain
if (theTclDomain->addElement(theElement) == false) {
opserr << "WARNING could not add element to the domain\n";
opserr << "elastomericBearing element: " << tag << endln;
delete theElement;
return TCL_ERROR;
}
}
else {
opserr << "WARNING elastomericBearing command only works when ndm is 2 or 3, ndm: ";
opserr << ndm << endln;
return TCL_ERROR;
}
// if get here we have sucessfully created the elastomericBearing and added it to the domain
return TCL_OK;
}
void *
OPS_ParallelMaterial(void)
{
// Pointer to a uniaxial material that will be returned
UniaxialMaterial *theMaterial = 0;
Vector *theFactors = 0;
int argc = OPS_GetNumRemainingInputArgs();
if (argc < 2) {
opserr << "Invalid #args, want: uniaxialMaterial Parallel $tag $tag1 $tag2 ... <-factors $fact1 $fact2 ...>" << endln;
return 0;
}
// count the number of materials
int numMats = -1;
int gotFactors = 0;
while (argc > 0) {
const char *argvLoc = OPS_GetString();
if (strcmp(argvLoc, "-factors") == 0) {
gotFactors = 1;
break;
}
numMats++;
argc = OPS_GetNumRemainingInputArgs();
}
// reset to read from beginning
OPS_ResetCurrentInputArg(2);
int numData = 1+numMats;
int *iData = new int[numData];
UniaxialMaterial **theMats = new UniaxialMaterial *[numMats];
double *dData = 0;
if (gotFactors) {
dData = new double[numMats];
theFactors = new Vector(dData, numMats);
}
if (OPS_GetIntInput(&numData, iData) != 0) {
opserr << "WARNING invalid data for uniaxialMaterial Parallel" << endln;
return 0;
}
for (int i=1; i<numMats+1; i++) {
UniaxialMaterial *theMat = OPS_getUniaxialMaterial(iData[i]);
if (theMat == 0) {
opserr << "WARNING no existing material with tag " << iData[i]
<< " for uniaxialMaterial Parallel" << iData[0] << endln;
delete [] iData;
delete [] theMats;
return 0;
}
theMats[i-1] = theMat;
}
if (gotFactors) {
const char *argvLoc = OPS_GetString();
if (OPS_GetDoubleInput(&numMats, dData) != 0) {
opserr << "WARNING invalid factors for uniaxialMaterial Parallel" << endln;
return 0;
}
}
// Parsing was successful, allocate the material
theMaterial = new ParallelMaterial(iData[0], numMats, theMats, theFactors);
if (theMaterial == 0) {
opserr << "WARNING could not create uniaxialMaterial of type Parallel\n";
return 0;
}
delete [] iData;
delete [] theMats;
if (theFactors != 0)
delete theFactors;
return theMaterial;
}
UniaxialMaterial *OPS_GetUniaxialMaterial(int matTag)
{
return OPS_getUniaxialMaterial(matTag);
}
int OPS_Layer()
{
// num args
if(OPS_GetNumRemainingInputArgs() < 1) {
opserr<<"WARNING insufficient args: layer type ...\n";
return -1;
}
// create patch
ReinfLayer *theLayer = 0;
const char* type = OPS_GetString();
if(strcmp(type,"straight")==0) {
theLayer = (ReinfLayer*) OPS_StraightReinfLayer();
} else if(strcmp(type,"circ")==0 || strcmp(type,"circular")==0) {
theLayer = (ReinfLayer*) OPS_CircReinfLayer();
} else {
opserr<<"ERROR unknow layer type\n";
return -1;
}
if (theLayer == 0) {
opserr<<"WARNING failed to create layer\n";
return -1;
}
// add fibers to the section
int numReinfBars = theLayer->getNumReinfBars();
ReinfBar* reinfBar = theLayer->getReinfBars();
int matTag = theLayer->getMaterialID();
if(reinfBar == 0) {
opserr<<"ERROR out of run to create fibers\n";
delete theLayer;
return -1;
}
for(int j=0; j<numReinfBars; j++) {
// get fiber data
double area = reinfBar[j].getArea();
const Vector& cPos = reinfBar[j].getPosition();
// create fibers
Fiber *theFiber = 0;
UniaxialMaterial *material = 0;
NDMaterial *ndmaterial = 0;
if (theActiveFiberSection2d != 0) {
material = OPS_getUniaxialMaterial(matTag);
if (material == 0) {
opserr << "WARNING material "<<matTag<<" cannot be found\n";
delete theLayer;
return -1;
}
theFiber = new UniaxialFiber2d(j,*material,area,cPos(0));
theActiveFiberSection2d->addFiber(*theFiber);
} else if (theActiveFiberSection2dThermal != 0) {
material = OPS_getUniaxialMaterial(matTag);
if (material == 0) {
opserr << "WARNING material "<<matTag<<" cannot be found\n";
delete theLayer;
return -1;
}
theFiber = new UniaxialFiber2d(j,*material,area,cPos(0));
theActiveFiberSection2dThermal->addFiber(*theFiber);
} else if (theActiveFiberSection3d != 0) {
material = OPS_getUniaxialMaterial(matTag);
if (material == 0) {
opserr << "WARNING material "<<matTag<<" cannot be found\n";
delete theLayer;
return -1;
}
theFiber = new UniaxialFiber3d(j,*material,area,cPos);
theActiveFiberSection3d->addFiber(*theFiber);
} else if (theActiveFiberSection3dThermal != 0) {
material = OPS_getUniaxialMaterial(matTag);
if (material == 0) {
opserr << "WARNING material "<<matTag<<" cannot be found\n";
delete theLayer;
return -1;
}
theFiber = new UniaxialFiber3d(j,*material,area,cPos);
theActiveFiberSection3dThermal->addFiber(*theFiber);
} else if (theActiveFiberSectionGJThermal != 0) {
material = OPS_getUniaxialMaterial(matTag);
if (material == 0) {
opserr << "WARNING material "<<matTag<<" cannot be found\n";
delete theLayer;
return -1;
}
theFiber = new UniaxialFiber3d(j,*material,area,cPos);
theActiveFiberSectionGJThermal->addFiber(*theFiber);
} else if (theActiveNDFiberSection2d != 0) {
ndmaterial = OPS_getNDMaterial(matTag);
if (ndmaterial == 0) {
opserr << "WARNING material "<<matTag<<" cannot be found\n";
delete theLayer;
return -1;
}
theFiber = new NDFiber2d(j,*ndmaterial,area,cPos(0));
theActiveNDFiberSection2d->addFiber(*theFiber);
} else if (theActiveNDFiberSection3d != 0) {
ndmaterial = OPS_getNDMaterial(matTag);
if (ndmaterial == 0) {
opserr << "WARNING material "<<matTag<<" cannot be found\n";
delete theLayer;
return -1;
}
theFiber = new NDFiber3d(j,*ndmaterial,area,cPos(0),cPos(1));
theActiveNDFiberSection3d->addFiber(*theFiber);
}
}
delete [] reinfBar;
delete theLayer;
return 0;
}
int OPS_Patch()
{
// num args
if(OPS_GetNumRemainingInputArgs() < 1) {
opserr<<"WARNING insufficient args: patch type ...\n";
return -1;
}
// create patch
Patch *thePatch = 0;
const char* type = OPS_GetString();
if(strcmp(type,"quad")==0 || strcmp(type,"quadr")==0 || strcmp(type,"quadrilateral")==0) {
thePatch = (QuadPatch*) OPS_QuadPatch();
} else if(strcmp(type,"rect")==0 || strcmp(type,"rectangular")==0) {
thePatch = (QuadPatch*) OPS_RectPatch();
} else if(strcmp(type,"circ")==0 || strcmp(type,"circular")==0) {
thePatch = (CircPatch*) OPS_CircPatch();
} else {
opserr<<"ERROR unknow patch type\n";
return -1;
}
if (thePatch == 0) {
opserr<<"WARNING failed to create patch\n";
return -1;
}
// add fibers to the section
int numCells = thePatch->getNumCells();
int matTag = thePatch->getMaterialID();
Cell** cells = thePatch->getCells();
if(cells == 0) {
opserr << "ERROR out of run to create fibers\n";
delete thePatch;
return -1;
}
for(int j=0; j<numCells; j++) {
// get fiber data
double area = cells[j]->getArea();
const Vector& cPos = cells[j]->getCentroidPosition();
// create fibers
Fiber *theFiber = 0;
UniaxialMaterial *material = 0;
NDMaterial *ndmaterial = 0;
if (theActiveFiberSection2d != 0) {
material = OPS_getUniaxialMaterial(matTag);
if (material == 0) {
opserr << "WARNING material "<<matTag<<" cannot be found\n";
delete thePatch;
return -1;
}
theFiber = new UniaxialFiber2d(j,*material,area,cPos(0));
theActiveFiberSection2d->addFiber(*theFiber);
} else if (theActiveFiberSection2dThermal != 0) {
material = OPS_getUniaxialMaterial(matTag);
if (material == 0) {
opserr << "WARNING material "<<matTag<<" cannot be found\n";
delete thePatch;
return -1;
}
theFiber = new UniaxialFiber2d(j,*material,area,cPos(0));
theActiveFiberSection2dThermal->addFiber(*theFiber);
} else if (theActiveFiberSection3d != 0) {
material = OPS_getUniaxialMaterial(matTag);
if (material == 0) {
opserr << "WARNING material "<<matTag<<" cannot be found\n";
delete thePatch;
return -1;
}
theFiber = new UniaxialFiber3d(j,*material,area,cPos);
theActiveFiberSection3d->addFiber(*theFiber);
} else if (theActiveFiberSection3dThermal != 0) {
material = OPS_getUniaxialMaterial(matTag);
if (material == 0) {
opserr << "WARNING material "<<matTag<<" cannot be found\n";
delete thePatch;
return -1;
}
theFiber = new UniaxialFiber3d(j,*material,area,cPos);
theActiveFiberSection3dThermal->addFiber(*theFiber);
} else if (theActiveFiberSectionGJThermal != 0) {
material = OPS_getUniaxialMaterial(matTag);
if (material == 0) {
opserr << "WARNING material "<<matTag<<" cannot be found\n";
delete thePatch;
return -1;
}
theFiber = new UniaxialFiber3d(j,*material,area,cPos);
theActiveFiberSectionGJThermal->addFiber(*theFiber);
} else if (theActiveNDFiberSection2d != 0) {
ndmaterial = OPS_getNDMaterial(matTag);
if (ndmaterial == 0) {
opserr << "WARNING material "<<matTag<<" cannot be found\n";
delete thePatch;
return -1;
}
theFiber = new NDFiber2d(j,*ndmaterial,area,cPos(0));
theActiveNDFiberSection2d->addFiber(*theFiber);
} else if (theActiveNDFiberSection3d != 0) {
ndmaterial = OPS_getNDMaterial(matTag);
if (ndmaterial == 0) {
opserr << "WARNING material "<<matTag<<" cannot be found\n";
delete thePatch;
return -1;
}
theFiber = new NDFiber3d(j,*ndmaterial,area,cPos(0),cPos(1));
theActiveNDFiberSection3d->addFiber(*theFiber);
}
delete cells[j];
}
delete [] cells;
delete thePatch;
return 0;
}
int TclModelBuilder_addRJWatsonEqsBearing(ClientData clientData,
Tcl_Interp *interp, int argc, TCL_Char **argv, Domain *theTclDomain,
TclModelBuilder *theTclBuilder, int eleArgStart)
{
// ensure the destructor has not been called
if (theTclBuilder == 0) {
opserr << "WARNING builder has been destroyed - RJWatsonEqsBearing\n";
return TCL_ERROR;
}
Element *theElement = 0;
int ndm = theTclBuilder->getNDM();
int ndf = theTclBuilder->getNDF();
int tag;
if (ndm == 2) {
// check plane frame problem has 3 dof per node
if (ndf != 3) {
opserr << "WARNING invalid ndf: " << ndf;
opserr << ", for plane problem need 3 - RJWatsonEqsBearing\n";
return TCL_ERROR;
}
// check the number of arguments is correct
if ((argc-eleArgStart) < 13) {
opserr << "WARNING insufficient arguments\n";
printCommand(argc, argv);
opserr << "Want: RJWatsonEqsBearing eleTag iNode jNode frnMdlTag kInit k2 k3 mu -P matTag -Mz matTag <-orient x1 x2 x3 y1 y2 y3> <-shearDist sDratio> <-doRayleigh> <-mass m> <-iter maxIter tol>\n";
return TCL_ERROR;
}
// get the id and end nodes
int iNode, jNode, frnMdlTag, matTag, argi, i, j;
int recvMat = 0;
double kInit, k2;
double k3 = 0.0;
double mu = 2.0;
double shearDistI = 1.0;
int doRayleigh = 0;
double mass = 0.0;
int maxIter = 25;
double tol = 1E-12;
double kFactUplift = 1E-12;
if (Tcl_GetInt(interp, argv[1+eleArgStart], &tag) != TCL_OK) {
opserr << "WARNING invalid RJWatsonEqsBearing eleTag\n";
return TCL_ERROR;
}
if (Tcl_GetInt(interp, argv[2+eleArgStart], &iNode) != TCL_OK) {
opserr << "WARNING invalid iNode\n";
opserr << "RJWatsonEqsBearing element: " << tag << endln;
return TCL_ERROR;
}
if (Tcl_GetInt(interp, argv[3+eleArgStart], &jNode) != TCL_OK) {
opserr << "WARNING invalid jNode\n";
opserr << "RJWatsonEqsBearing element: " << tag << endln;
return TCL_ERROR;
}
if (Tcl_GetInt(interp, argv[4+eleArgStart], &frnMdlTag) != TCL_OK) {
opserr << "WARNING invalid frnMdlTag\n";
opserr << "RJWatsonEqsBearing element: " << tag << endln;
return TCL_ERROR;
}
FrictionModel *theFrnMdl = OPS_getFrictionModel(frnMdlTag);
if (theFrnMdl == 0) {
opserr << "WARNING friction model not found\n";
opserr << "frictionModel: " << frnMdlTag << endln;
opserr << "RJWatsonEqsBearing element: " << tag << endln;
return TCL_ERROR;
}
if (Tcl_GetDouble(interp, argv[5+eleArgStart], &kInit) != TCL_OK) {
opserr << "WARNING invalid kInit\n";
opserr << "RJWatsonEqsBearing element: " << tag << endln;
return TCL_ERROR;
}
if (Tcl_GetDouble(interp, argv[6+eleArgStart], &k2) != TCL_OK) {
opserr << "WARNING invalid k2\n";
opserr << "RJWatsonEqsBearing element: " << tag << endln;
return TCL_ERROR;
}
if (Tcl_GetDouble(interp, argv[7+eleArgStart], &k3) != TCL_OK) {
opserr << "WARNING invalid k3\n";
opserr << "RJWatsonEqsBearing element: " << tag << endln;
return TCL_ERROR;
}
if (Tcl_GetDouble(interp, argv[8+eleArgStart], &mu) != TCL_OK) {
opserr << "WARNING invalid mu\n";
opserr << "RJWatsonEqsBearing element: " << tag << endln;
return TCL_ERROR;
}
UniaxialMaterial *theMaterials[2];
for (i = 9+eleArgStart; i < argc; i++) {
if (i+1 < argc && strcmp(argv[i], "-P") == 0) {
theMaterials[0] = 0;
if (Tcl_GetInt(interp, argv[i+1], &matTag) != TCL_OK) {
opserr << "WARNING invalid matTag\n";
opserr << "RJWatsonEqsBearing element: " << tag << endln;
return TCL_ERROR;
}
theMaterials[0] = OPS_getUniaxialMaterial(matTag);
if (theMaterials[0] == 0) {
opserr << "WARNING material model not found\n";
opserr << "uniaxialMaterial: " << matTag << endln;
opserr << "RJWatsonEqsBearing element: " << tag << endln;
return TCL_ERROR;
}
recvMat++;
}
}
for (i = 9+eleArgStart; i < argc; i++) {
if (i+1 < argc && strcmp(argv[i], "-Mz") == 0) {
if (Tcl_GetInt(interp, argv[i+1], &matTag) != TCL_OK) {
opserr << "WARNING invalid matTag\n";
opserr << "RJWatsonEqsBearing element: " << tag << endln;
return TCL_ERROR;
}
theMaterials[1] = OPS_getUniaxialMaterial(matTag);
if (theMaterials[1] == 0) {
opserr << "WARNING material model not found\n";
opserr << "uniaxialMaterial: " << matTag << endln;
opserr << "RJWatsonEqsBearing element: " << tag << endln;
return TCL_ERROR;
}
recvMat++;
}
}
if (recvMat != 2) {
opserr << "WARNING wrong number of materials\n";
opserr << "got " << recvMat << " materials, but want 2 materials\n";
opserr << "RJWatsonEqsBearing element: " << tag << endln;
return TCL_ERROR;
}
// check for optional arguments
Vector x = 0;
Vector y = 0;
for (i = 9+eleArgStart; i < argc; i++) {
if (strcmp(argv[i],"-orient") == 0) {
j = i+1;
int numOrient = 0;
while (j < argc &&
strcmp(argv[j],"-shearDist") != 0 &&
strcmp(argv[j],"-doRayleigh") != 0 &&
strcmp(argv[j],"-mass") != 0 &&
strcmp(argv[j],"-iter") != 0 &&
strcmp(argv[j],"-kFactUplift") != 0) {
numOrient++;
j++;
}
if (numOrient == 6) {
argi = i+1;
x.resize(3);
y.resize(3);
double value;
// read the x values
for (j=0; j<3; j++) {
if (Tcl_GetDouble(interp, argv[argi], &value) != TCL_OK) {
opserr << "WARNING invalid -orient value\n";
opserr << "RJWatsonEqsBearing element: " << tag << endln;
return TCL_ERROR;
} else {
argi++;
x(j) = value;
}
}
// read the y values
for (j=0; j<3; j++) {
if (Tcl_GetDouble(interp, argv[argi], &value) != TCL_OK) {
opserr << "WARNING invalid -orient value\n";
opserr << "RJWatsonEqsBearing element: " << tag << endln;
return TCL_ERROR;
} else {
argi++;
y(j) = value;
}
}
}
else {
opserr << "WARNING insufficient arguments after -orient flag\n";
opserr << "RJWatsonEqsBearing element: " << tag << endln;
return TCL_ERROR;
}
}
}
for (int i = 9+eleArgStart; i < argc; i++) {
if (i+1 < argc && strcmp(argv[i], "-shearDist") == 0) {
if (Tcl_GetDouble(interp, argv[i+1], &shearDistI) != TCL_OK) {
opserr << "WARNING invalid -shearDist value\n";
opserr << "RJWatsonEqsBearing element: " << tag << endln;
return TCL_ERROR;
}
}
}
for (int i = 9+eleArgStart; i < argc; i++) {
if (strcmp(argv[i], "-doRayleigh") == 0)
doRayleigh = 1;
}
for (int i = 9+eleArgStart; i < argc; i++) {
if (i+1 < argc && strcmp(argv[i], "-mass") == 0) {
if (Tcl_GetDouble(interp, argv[i+1], &mass) != TCL_OK) {
opserr << "WARNING invalid -mass value\n";
opserr << "RJWatsonEqsBearing element: " << tag << endln;
return TCL_ERROR;
}
}
}
for (int i = 9+eleArgStart; i < argc; i++) {
if (i+2 < argc && strcmp(argv[i], "-iter") == 0) {
if (Tcl_GetInt(interp, argv[i+1], &maxIter) != TCL_OK) {
opserr << "WARNING invalid maxIter\n";
opserr << "RJWatsonEqsBearing element: " << tag << endln;
return TCL_ERROR;
}
if (Tcl_GetDouble(interp, argv[i+2], &tol) != TCL_OK) {
opserr << "WARNING invalid tol\n";
opserr << "RJWatsonEqsBearing element: " << tag << endln;
return TCL_ERROR;
}
}
}
for (int i = 9+eleArgStart; i < argc; i++) {
if (i+1 < argc && strcmp(argv[i], "-kFactUplift") == 0) {
if (Tcl_GetDouble(interp, argv[i+1], &kFactUplift) != TCL_OK) {
opserr << "WARNING invalid kFactUplift\n";
opserr << "RJWatsonEqsBearing element: " << tag << endln;
return TCL_ERROR;
}
}
}
// now create the RJWatsonEqsBearing
theElement = new RJWatsonEQS2d(tag, iNode, jNode, *theFrnMdl, kInit, k2,
theMaterials, y, x, k3, mu, shearDistI, doRayleigh, mass,
maxIter, tol, kFactUplift);
if (theElement == 0) {
opserr << "WARNING ran out of memory creating element\n";
opserr << "RJWatsonEqsBearing element: " << tag << endln;
return TCL_ERROR;
}
// then add the RJWatsonEqsBearing to the domain
if (theTclDomain->addElement(theElement) == false) {
opserr << "WARNING could not add element to the domain\n";
opserr << "RJWatsonEqsBearing element: " << tag << endln;
delete theElement;
return TCL_ERROR;
}
}
else if (ndm == 3) {
// check space frame problem has 6 dof per node
if (ndf != 6) {
opserr << "WARNING invalid ndf: " << ndf;
opserr << ", for space problem need 6 - RJWatsonEqsBearing \n";
return TCL_ERROR;
}
// check the number of arguments is correct
if ((argc-eleArgStart) < 18) {
opserr << "WARNING insufficient arguments\n";
printCommand(argc, argv);
opserr << "Want: RJWatsonEqsBearing eleTag iNode jNode frnMdlTag kInit -P matTag -Vy matTag -Vz matTag -T matTag -My matTag -Mz matTag <-orient <x1 x2 x3> y1 y2 y3> <-shearDist sDratio> <-doRayleigh> <-mass m> <-iter maxIter tol>\n";
return TCL_ERROR;
}
// get the id and end nodes
int iNode, jNode, frnMdlTag, matTag, argi, i, j;
int recvMat = 0;
double kInit;
double shearDistI = 1.0;
int doRayleigh = 0;
double mass = 0.0;
int maxIter = 25;
double tol = 1E-12;
double kFactUplift = 1E-12;
if (Tcl_GetInt(interp, argv[1+eleArgStart], &tag) != TCL_OK) {
opserr << "WARNING invalid RJWatsonEqsBearing eleTag\n";
return TCL_ERROR;
}
if (Tcl_GetInt(interp, argv[2+eleArgStart], &iNode) != TCL_OK) {
opserr << "WARNING invalid iNode\n";
opserr << "RJWatsonEqsBearing element: " << tag << endln;
return TCL_ERROR;
}
if (Tcl_GetInt(interp, argv[3+eleArgStart], &jNode) != TCL_OK) {
opserr << "WARNING invalid jNode\n";
opserr << "RJWatsonEqsBearing element: " << tag << endln;
return TCL_ERROR;
}
if (Tcl_GetInt(interp, argv[4+eleArgStart], &frnMdlTag) != TCL_OK) {
opserr << "WARNING invalid frnMdlTag\n";
opserr << "RJWatsonEqsBearing element: " << tag << endln;
return TCL_ERROR;
}
FrictionModel *theFrnMdl = OPS_getFrictionModel(frnMdlTag);
if (theFrnMdl == 0) {
opserr << "WARNING friction model not found\n";
opserr << "frictionModel: " << frnMdlTag << endln;
opserr << "RJWatsonEqsBearing element: " << tag << endln;
return TCL_ERROR;
}
if (Tcl_GetDouble(interp, argv[5+eleArgStart], &kInit) != TCL_OK) {
opserr << "WARNING invalid kInit\n";
opserr << "RJWatsonEqsBearing element: " << tag << endln;
return TCL_ERROR;
}
UniaxialMaterial *theMaterials[6];
for (i = 6+eleArgStart; i < argc; i++) {
if (i+1 < argc && strcmp(argv[i], "-P") == 0) {
if (Tcl_GetInt(interp, argv[i+1], &matTag) != TCL_OK) {
opserr << "WARNING invalid axial matTag\n";
opserr << "RJWatsonEqsBearing element: " << tag << endln;
return TCL_ERROR;
}
theMaterials[0] = OPS_getUniaxialMaterial(matTag);
if (theMaterials[0] == 0) {
opserr << "WARNING material model not found\n";
opserr << "uniaxialMaterial: " << matTag << endln;
opserr << "RJWatsonEqsBearing element: " << tag << endln;
return TCL_ERROR;
}
recvMat++;
}
}
for (i = 6+eleArgStart; i < argc; i++) {
if (i+1 < argc && strcmp(argv[i], "-Vy") == 0) {
if (Tcl_GetInt(interp, argv[i+1], &matTag) != TCL_OK) {
opserr << "WARNING invalid shear y matTag\n";
opserr << "RJWatsonEqsBearing element: " << tag << endln;
return TCL_ERROR;
}
theMaterials[1] = OPS_getUniaxialMaterial(matTag);
if (theMaterials[1] == 0) {
opserr << "WARNING material model not found\n";
opserr << "uniaxialMaterial: " << matTag << endln;
opserr << "RJWatsonEqsBearing element: " << tag << endln;
return TCL_ERROR;
}
recvMat++;
}
}
for (i = 6+eleArgStart; i < argc; i++) {
if (i+1 < argc && strcmp(argv[i], "-Vz") == 0) {
if (Tcl_GetInt(interp, argv[i+1], &matTag) != TCL_OK) {
opserr << "WARNING invalid shear z matTag\n";
opserr << "RJWatsonEqsBearing element: " << tag << endln;
return TCL_ERROR;
}
theMaterials[2] = OPS_getUniaxialMaterial(matTag);
if (theMaterials[2] == 0) {
opserr << "WARNING material model not found\n";
opserr << "uniaxialMaterial: " << matTag << endln;
opserr << "RJWatsonEqsBearing element: " << tag << endln;
return TCL_ERROR;
}
recvMat++;
}
}
for (i = 6+eleArgStart; i < argc; i++) {
if (i+1 < argc && strcmp(argv[i], "-T") == 0) {
if (Tcl_GetInt(interp, argv[i+1], &matTag) != TCL_OK) {
opserr << "WARNING invalid torsional matTag\n";
opserr << "RJWatsonEqsBearing element: " << tag << endln;
return TCL_ERROR;
}
theMaterials[3] = OPS_getUniaxialMaterial(matTag);
if (theMaterials[3] == 0) {
opserr << "WARNING material model not found\n";
opserr << "uniaxialMaterial: " << matTag << endln;
opserr << "RJWatsonEqsBearing element: " << tag << endln;
return TCL_ERROR;
}
recvMat++;
}
}
for (i = 6+eleArgStart; i < argc; i++) {
if (i+1 < argc && strcmp(argv[i], "-My") == 0) {
if (Tcl_GetInt(interp, argv[i+1], &matTag) != TCL_OK) {
opserr << "WARNING invalid moment y matTag\n";
opserr << "RJWatsonEqsBearing element: " << tag << endln;
return TCL_ERROR;
}
theMaterials[4] = OPS_getUniaxialMaterial(matTag);
if (theMaterials[4] == 0) {
opserr << "WARNING material model not found\n";
opserr << "uniaxialMaterial: " << matTag << endln;
opserr << "RJWatsonEqsBearing element: " << tag << endln;
return TCL_ERROR;
}
recvMat++;
}
}
for (i = 6+eleArgStart; i < argc; i++) {
if (i+1 < argc && strcmp(argv[i], "-Mz") == 0) {
if (Tcl_GetInt(interp, argv[i+1], &matTag) != TCL_OK) {
opserr << "WARNING invalid moment z matTag\n";
opserr << "RJWatsonEqsBearing element: " << tag << endln;
return TCL_ERROR;
}
theMaterials[5] = OPS_getUniaxialMaterial(matTag);
if (theMaterials[5] == 0) {
opserr << "WARNING material model not found\n";
opserr << "uniaxialMaterial: " << matTag << endln;
opserr << "RJWatsonEqsBearing element: " << tag << endln;
return TCL_ERROR;
}
recvMat++;
}
}
if (recvMat != 6) {
opserr << "WARNING wrong number of materials\n";
opserr << "got " << recvMat << " materials, but want 6 materials\n";
opserr << "RJWatsonEqsBearing element: " << tag << endln;
return TCL_ERROR;
}
// check for optional arguments
Vector x(0);
Vector y(3); y(0) = 0.0; y(1) = 1.0; y(2) = 0.0;
for (i = 6+eleArgStart; i < argc; i++) {
if (strcmp(argv[i],"-orient") == 0) {
j = i+1;
int numOrient = 0;
while (j < argc &&
strcmp(argv[j],"-shearDist") != 0 &&
strcmp(argv[j],"-doRayleigh") != 0 &&
strcmp(argv[j],"-mass") != 0 &&
strcmp(argv[j],"-iter") != 0 &&
strcmp(argv[j],"-kFactUplift") != 0) {
numOrient++;
j++;
}
if (numOrient == 3) {
argi = i+1;
double value;
// read the y values
for (j=0; j<3; j++) {
if (Tcl_GetDouble(interp, argv[argi], &value) != TCL_OK) {
opserr << "WARNING invalid -orient value\n";
opserr << "RJWatsonEqsBearing element: " << tag << endln;
return TCL_ERROR;
} else {
argi++;
y(j) = value;
}
}
}
else if (numOrient == 6) {
argi = i+1;
x.resize(3);
double value;
// read the x values
for (j=0; j<3; j++) {
if (Tcl_GetDouble(interp, argv[argi], &value) != TCL_OK) {
opserr << "WARNING invalid -orient value\n";
opserr << "RJWatsonEqsBearing element: " << tag << endln;
return TCL_ERROR;
} else {
argi++;
x(j) = value;
}
}
// read the y values
for (j=0; j<3; j++) {
if (Tcl_GetDouble(interp, argv[argi], &value) != TCL_OK) {
opserr << "WARNING invalid -orient value\n";
opserr << "RJWatsonEqsBearing element: " << tag << endln;
return TCL_ERROR;
} else {
argi++;
y(j) = value;
}
}
}
else {
opserr << "WARNING insufficient arguments after -orient flag\n";
opserr << "RJWatsonEqsBearing element: " << tag << endln;
return TCL_ERROR;
}
}
}
for (i = 6+eleArgStart; i < argc; i++) {
if (i+1 < argc && strcmp(argv[i], "-shearDist") == 0) {
if (Tcl_GetDouble(interp, argv[i+1], &shearDistI) != TCL_OK) {
opserr << "WARNING invalid -shearDist value\n";
opserr << "RJWatsonEqsBearing element: " << tag << endln;
return TCL_ERROR;
}
}
}
for (i = 6+eleArgStart; i < argc; i++) {
if (i+1 < argc && strcmp(argv[i], "-doRayleigh") == 0)
doRayleigh = 1;
}
for (i = 6+eleArgStart; i < argc; i++) {
if (i+1 < argc && strcmp(argv[i], "-mass") == 0) {
if (Tcl_GetDouble(interp, argv[i+1], &mass) != TCL_OK) {
opserr << "WARNING invalid -mass value\n";
opserr << "RJWatsonEqsBearing element: " << tag << endln;
return TCL_ERROR;
}
}
}
for (int i = 6+eleArgStart; i < argc; i++) {
if (i+2 < argc && strcmp(argv[i], "-iter") == 0) {
if (Tcl_GetInt(interp, argv[i+1], &maxIter) != TCL_OK) {
opserr << "WARNING invalid maxIter\n";
opserr << "RJWatsonEqsBearing element: " << tag << endln;
return TCL_ERROR;
}
if (Tcl_GetDouble(interp, argv[i+2], &tol) != TCL_OK) {
opserr << "WARNING invalid tol\n";
opserr << "RJWatsonEqsBearing element: " << tag << endln;
return TCL_ERROR;
}
}
}
for (int i = 6+eleArgStart; i < argc; i++) {
if (i+1 < argc && strcmp(argv[i], "-kFactUplift") == 0) {
if (Tcl_GetDouble(interp, argv[i+1], &kFactUplift) != TCL_OK) {
opserr << "WARNING invalid kFactUplift\n";
opserr << "singleFPBearing element: " << tag << endln;
return TCL_ERROR;
}
}
}
// now create the RJWatsonEqsBearing
theElement = new RJWatsonEQS3d(tag, iNode, jNode, *theFrnMdl, kInit,
theMaterials, y, x, shearDistI, doRayleigh, mass, maxIter, tol,
kFactUplift);
if (theElement == 0) {
opserr << "WARNING ran out of memory creating element\n";
opserr << "RJWatsonEqsBearing element: " << tag << endln;
return TCL_ERROR;
}
// then add the RJWatsonEqsBearing to the domain
if (theTclDomain->addElement(theElement) == false) {
opserr << "WARNING could not add element to the domain\n";
opserr << "RJWatsonEqsBearing element: " << tag << endln;
delete theElement;
return TCL_ERROR;
}
}
else {
opserr << "WARNING RJWatsonEqsBearing command only works when ndm is 2 or 3, ndm: ";
opserr << ndm << endln;
return TCL_ERROR;
}
// if get here we have sucessfully created the RJWatsonEqsBearing and added it to the domain
return TCL_OK;
}
void* OPS_ZeroLengthND()
{
int ndm = OPS_GetNDM();
int numdata = OPS_GetNumRemainingInputArgs();
if (numdata < 4) {
opserr << "WARNING too few arguments " <<
"want - element zeroLengthND eleTag? iNode? jNode? " <<
"NDTag? <1DTag?>" <<
"<-orient x1? x2? x3? y1? y2? y3?>\n";
return 0;
}
int idata [4];
numdata = 4;
if (OPS_GetIntInput(&numdata,idata) < 0) {
opserr << "WARNING: failed to get integer data\n";
return 0;
}
NDMaterial* nmat = OPS_getNDMaterial(idata[3]);
if (nmat == 0) {
opserr<<"WARNING: NDMaterial "<<idata[3]<<" is not defined\n";
return 0;
}
UniaxialMaterial* umat = 0;
int uniTag;
if (OPS_GetIntInput(&numdata,&uniTag) >= 0) {
umat = OPS_getUniaxialMaterial(uniTag);
if (umat == 0) {
opserr<<"WARNING: uniaxial material "<<uniTag<<" is not defined\n";
return 0;
}
} else {
OPS_ResetCurrentInputArg(-1);
}
const char* type = OPS_GetString();
Vector x(3); x(0) = 1.0; x(1) = 0.0; x(2) = 0.0;
Vector y(3); y(0) = 0.0; y(1) = 1.0; y(2) = 0.0;
if (strcmp(type,"orient") == 0) {
if (OPS_GetNumRemainingInputArgs() < 6) {
opserr<<"WARNING: insufficient orient values\n";
return 0;
}
numdata = 3;
if (OPS_GetDoubleInput(&numdata,&x(0)) < 0) {
opserr<<"WARNING: invalid double input\n";
return 0;
}
if (OPS_GetDoubleInput(&numdata,&y(0)) < 0) {
opserr<<"WARNING: invalid double input\n";
return 0;
}
}
if (umat == 0) {
return new ZeroLengthND(idata[0],ndm,idata[1],idata[2],x,y,*nmat);
} else {
return new ZeroLengthND(idata[0],ndm,idata[1],idata[2],x,y,*nmat,*umat);
}
}
int
TclModelBuilder_Pipelin2(ClientData clientData, Tcl_Interp *interp, int argc,
TCL_Char **argv, Domain*theTclDomain,
TclModelBuilder *theTclBuilder,
int eleArgStart)
{
//make sure at least one other argument to contain type of system
if (argc!=8 && argc!=9){
interp->result = "WARNING bad command - Pipelin2 eleId iNode jNode matID Area c_3 Gamma";
return TCL_ERROR;
}
//get the id, x_loc, y_loc
int trussId, iNode, jNode, matID;
double A, C_3, Gamma=0.0;
if (Tcl_GetInt(interp,argv[2], &trussId)!= TCL_OK){
interp->result = "WARNING invalid eleId - Pipelin2 eleId iNode jNode matID Area c_3 Gamma";
return TCL_ERROR;
}
if (Tcl_GetInt(interp, argv[3], &iNode) != TCL_OK) {
interp->result = "WARNING invalid iNode - Pipelin2 eleId iNode jNode matID Area c_3 Gamma";
return TCL_ERROR;
}
if (Tcl_GetInt(interp, argv[4], &jNode) != TCL_OK) {
interp->result = "WARNING invalid jNode - Pipelin2 eleId iNode jNode matID Area c_3 Gamma";
return TCL_ERROR;
}
if (Tcl_GetInt(interp, argv[5], &matID) != TCL_OK) {
interp->result = "WARNING invalid matID - Pipelin2 eleId iNode jNode matID Area c_3 Gamma";
return TCL_ERROR;
}
if (Tcl_GetDouble(interp, argv[6], &A) != TCL_OK) {
interp->result = "WARNING invalid Area - Pipelin2 eleId iNode jNode matID Area c_3 Gamma";
return TCL_ERROR;
}
if (Tcl_GetDouble(interp, argv[7], &C_3) != TCL_OK) {
interp->result = "WARNING invalid C_3 - Pipelin2 eleId iNode jNode matID Area c_3 Gamma";
return TCL_ERROR;
}
if (Tcl_GetDouble(interp, argv[8], &Gamma) != TCL_OK) {
interp->result = "WARNING invalid C_3 - Pipelin2 eleId iNode jNode matID Area c_3 gamma";
return TCL_ERROR;
}
UniaxialMaterial *theMaterial = OPS_getUniaxialMaterial(matID);
if (theMaterial ==0) {
opserr << "WARNING TclPipelin2 - Pipelin2 - no Material found with tag ";
opserr << matID << endln;
return TCL_ERROR;
}
//now create the truss and add it to the domain
Element *theTruss = 0;
theTruss=new Pipelin2(trussId,iNode,jNode,*theMaterial,A,C_3,Gamma);
if (theTruss==0) {
opserr << "WARNING TclPipelin2 - Pipelin2 - ran out of memory for node ";
opserr << trussId << endln;
return TCL_ERROR;
}
if (theTclDomain->addElement(theTruss)==false) {
delete theTruss;
opserr << "WARNING TclPipelin2 - Pipelin2 - could not add Pipelin2 to the domain";
opserr << trussId << endln;
return TCL_ERROR;
}
//Everything is OK
return TCL_OK;
}