static PyObject *Proxy_remainder(PyObject *o1, PyObject *o2)
{
Proxy__WRAPPED_REPLACE_OR_RETURN_NULL(o1);
Proxy__WRAPPED_REPLACE_OR_RETURN_NULL(o2);
return PyNumber_Remainder(o1, o2);
}
inline CObject operator% (const CObject& a, const CObject& b)
{
PyObject* tmp_obj = PyNumber_Remainder(a.Get(), b.Get());
if ( !tmp_obj ) {
throw CArithmeticError("PyNumber_Remainder");
}
return CObject(tmp_obj, eTakeOwnership);
}
/* Assumes (PyLong_CheckExact(ob) || PyBool_Check(ob)) */
static int
range_contains_long(rangeobject *r, PyObject *ob)
{
int cmp1, cmp2, cmp3;
PyObject *tmp1 = NULL;
PyObject *tmp2 = NULL;
PyObject *zero = NULL;
int result = -1;
zero = PyLong_FromLong(0);
if (zero == NULL) /* MemoryError in int(0) */
goto end;
/* Check if the value can possibly be in the range. */
cmp1 = PyObject_RichCompareBool(r->step, zero, Py_GT);
if (cmp1 == -1)
goto end;
if (cmp1 == 1) { /* positive steps: start <= ob < stop */
cmp2 = PyObject_RichCompareBool(r->start, ob, Py_LE);
cmp3 = PyObject_RichCompareBool(ob, r->stop, Py_LT);
}
else { /* negative steps: stop < ob <= start */
cmp2 = PyObject_RichCompareBool(ob, r->start, Py_LE);
cmp3 = PyObject_RichCompareBool(r->stop, ob, Py_LT);
}
if (cmp2 == -1 || cmp3 == -1) /* TypeError */
goto end;
if (cmp2 == 0 || cmp3 == 0) { /* ob outside of range */
result = 0;
goto end;
}
/* Check that the stride does not invalidate ob's membership. */
tmp1 = PyNumber_Subtract(ob, r->start);
if (tmp1 == NULL)
goto end;
tmp2 = PyNumber_Remainder(tmp1, r->step);
if (tmp2 == NULL)
goto end;
/* result = (int(ob) - start % step) == 0 */
result = PyObject_RichCompareBool(tmp2, zero, Py_EQ);
end:
Py_XDECREF(tmp1);
Py_XDECREF(tmp2);
Py_XDECREF(zero);
return result;
}
#include "Python.h"
static PyObject *__Pyx_UnpackItem(PyObject *, int);
static int __Pyx_EndUnpack(PyObject *, int);
static int __Pyx_PrintItem(PyObject *);
static int __Pyx_PrintNewline(void);
static void __Pyx_ReRaise(void);
static void __Pyx_RaiseWithTraceback(PyObject *, PyObject *, PyObject *);
static PyObject *__Pyx_Import(PyObject *name, PyObject *from_list);
static PyObject *__Pyx_GetExcValue(void);
static PyObject *__Pyx_GetName(PyObject *dict, char *name);
static PyObject *__pyx_m;
static PyObject *__pyx_b;
PyObject *__pyx_f_blowup(PyObject *__pyx_self, PyObject *__pyx_args); /*proto*/
PyObject *__pyx_f_blowup(PyObject *__pyx_self, PyObject *__pyx_args) {
PyObject *__pyx_v_p = 0;
PyObject *__pyx_v_q = 0;
int __pyx_v_n;
int __pyx_v_i;
PyObject *__pyx_r;
PyObject *__pyx_1 = 0;
PyObject *__pyx_2 = 0;
PyObject *__pyx_3 = 0;
PyObject *__pyx_4 = 0;
if (!PyArg_ParseTuple(__pyx_args, "OO", &__pyx_v_p, &__pyx_v_q)) return 0;
Py_INCREF(__pyx_v_p);
Py_INCREF(__pyx_v_q);
/* "ProjectsA:Python:Pyrex:Tests:Bugs:jeff_epler_1.pyx":2 */
/* "ProjectsA:Python:Pyrex:Tests:Bugs:jeff_epler_1.pyx":3 */
__pyx_3 = PyInt_FromLong(__pyx_v_n); if (!__pyx_3) goto __pyx_L1;
__pyx_1 = PyInt_FromLong(__pyx_v_i); if (!__pyx_1) goto __pyx_L1;
__pyx_2 = PyObject_GetItem(__pyx_v_p, __pyx_1); if (!__pyx_2) goto __pyx_L1;
Py_DECREF(__pyx_1); __pyx_1 = 0;
__pyx_4 = PyNumber_Remainder(__pyx_3, __pyx_2); if (!__pyx_4) goto __pyx_L1;
Py_DECREF(__pyx_3); __pyx_3 = 0;
Py_DECREF(__pyx_2); __pyx_2 = 0;
__pyx_r = __pyx_4;
__pyx_4 = 0;
goto __pyx_L0;
__pyx_r = Py_None; Py_INCREF(__pyx_r);
goto __pyx_L0;
__pyx_L1:;
Py_XDECREF(__pyx_1);
Py_XDECREF(__pyx_2);
Py_XDECREF(__pyx_3);
Py_XDECREF(__pyx_4);
__pyx_r = 0;
__pyx_L0:;
Py_DECREF(__pyx_v_p);
Py_DECREF(__pyx_v_q);
return __pyx_r;
}
/* Replace LOAD_CONST c1. LOAD_CONST c2 BINOP
with LOAD_CONST binop(c1,c2)
The consts table must still be in list form so that the
new constant can be appended.
Called with codestr pointing to the first LOAD_CONST.
Abandons the transformation if the folding fails (i.e. 1+'a').
If the new constant is a sequence, only folds when the size
is below a threshold value. That keeps pyc files from
becoming large in the presence of code like: (None,)*1000.
*/
static int
fold_binops_on_constants(unsigned char *codestr, PyObject *consts)
{
PyObject *newconst, *v, *w;
Py_ssize_t len_consts, size;
int opcode;
/* Pre-conditions */
assert(PyList_CheckExact(consts));
assert(codestr[0] == LOAD_CONST);
assert(codestr[3] == LOAD_CONST);
/* Create new constant */
v = PyList_GET_ITEM(consts, GETARG(codestr, 0));
w = PyList_GET_ITEM(consts, GETARG(codestr, 3));
opcode = codestr[6];
switch (opcode) {
case BINARY_POWER:
newconst = PyNumber_Power(v, w, Py_None);
break;
case BINARY_MULTIPLY:
newconst = PyNumber_Multiply(v, w);
break;
case BINARY_TRUE_DIVIDE:
newconst = PyNumber_TrueDivide(v, w);
break;
case BINARY_FLOOR_DIVIDE:
newconst = PyNumber_FloorDivide(v, w);
break;
case BINARY_MODULO:
newconst = PyNumber_Remainder(v, w);
break;
case BINARY_ADD:
newconst = PyNumber_Add(v, w);
break;
case BINARY_SUBTRACT:
newconst = PyNumber_Subtract(v, w);
break;
case BINARY_SUBSCR:
/* #5057: if v is unicode, there might be differences between
wide and narrow builds in cases like '\U00012345'[0] or
'\U00012345abcdef'[3], so it's better to skip the optimization
in order to produce compatible pycs.
*/
if (PyUnicode_Check(v))
return 0;
newconst = PyObject_GetItem(v, w);
break;
case BINARY_LSHIFT:
newconst = PyNumber_Lshift(v, w);
break;
case BINARY_RSHIFT:
newconst = PyNumber_Rshift(v, w);
break;
case BINARY_AND:
newconst = PyNumber_And(v, w);
break;
case BINARY_XOR:
newconst = PyNumber_Xor(v, w);
break;
case BINARY_OR:
newconst = PyNumber_Or(v, w);
break;
default:
/* Called with an unknown opcode */
PyErr_Format(PyExc_SystemError,
"unexpected binary operation %d on a constant",
opcode);
return 0;
}
if (newconst == NULL) {
if(!PyErr_ExceptionMatches(PyExc_KeyboardInterrupt))
PyErr_Clear();
return 0;
}
size = PyObject_Size(newconst);
if (size == -1) {
if (PyErr_ExceptionMatches(PyExc_KeyboardInterrupt))
return 0;
PyErr_Clear();
} else if (size > 20) {
Py_DECREF(newconst);
return 0;
}
/* Append folded constant into consts table */
len_consts = PyList_GET_SIZE(consts);
if (PyList_Append(consts, newconst)) {
Py_DECREF(newconst);
return 0;
}
Py_DECREF(newconst);
/* Write NOP NOP NOP NOP LOAD_CONST newconst */
memset(codestr, NOP, 4);
codestr[4] = LOAD_CONST;
SETARG(codestr, 4, len_consts);
return 1;
}
/* Replace LOAD_CONST c1. LOAD_CONST c2 BINOP
with LOAD_CONST binop(c1,c2)
The consts table must still be in list form so that the
new constant can be appended.
Called with codestr pointing to the BINOP.
Abandons the transformation if the folding fails (i.e. 1+'a').
If the new constant is a sequence, only folds when the size
is below a threshold value. That keeps pyc files from
becoming large in the presence of code like: (None,)*1000.
*/
static int
fold_binops_on_constants(unsigned char *codestr, PyObject *consts, PyObject **objs)
{
PyObject *newconst, *v, *w;
Py_ssize_t len_consts, size;
int opcode;
/* Pre-conditions */
assert(PyList_CheckExact(consts));
/* Create new constant */
v = objs[0];
w = objs[1];
opcode = codestr[0];
switch (opcode) {
case BINARY_POWER:
newconst = PyNumber_Power(v, w, Py_None);
break;
case BINARY_MULTIPLY:
newconst = PyNumber_Multiply(v, w);
break;
case BINARY_TRUE_DIVIDE:
newconst = PyNumber_TrueDivide(v, w);
break;
case BINARY_FLOOR_DIVIDE:
newconst = PyNumber_FloorDivide(v, w);
break;
case BINARY_MODULO:
newconst = PyNumber_Remainder(v, w);
break;
case BINARY_ADD:
newconst = PyNumber_Add(v, w);
break;
case BINARY_SUBTRACT:
newconst = PyNumber_Subtract(v, w);
break;
case BINARY_SUBSCR:
newconst = PyObject_GetItem(v, w);
break;
case BINARY_LSHIFT:
newconst = PyNumber_Lshift(v, w);
break;
case BINARY_RSHIFT:
newconst = PyNumber_Rshift(v, w);
break;
case BINARY_AND:
newconst = PyNumber_And(v, w);
break;
case BINARY_XOR:
newconst = PyNumber_Xor(v, w);
break;
case BINARY_OR:
newconst = PyNumber_Or(v, w);
break;
default:
/* Called with an unknown opcode */
PyErr_Format(PyExc_SystemError,
"unexpected binary operation %d on a constant",
opcode);
return 0;
}
if (newconst == NULL) {
if(!PyErr_ExceptionMatches(PyExc_KeyboardInterrupt))
PyErr_Clear();
return 0;
}
size = PyObject_Size(newconst);
if (size == -1) {
if (PyErr_ExceptionMatches(PyExc_KeyboardInterrupt))
return 0;
PyErr_Clear();
} else if (size > 20) {
Py_DECREF(newconst);
return 0;
}
/* Append folded constant into consts table */
len_consts = PyList_GET_SIZE(consts);
if (PyList_Append(consts, newconst)) {
Py_DECREF(newconst);
return 0;
}
Py_DECREF(newconst);
/* Write NOP NOP NOP NOP LOAD_CONST newconst */
codestr[-2] = LOAD_CONST;
SETARG(codestr, -2, len_consts);
return 1;
}
/* Replace LOAD_CONST c1. LOAD_CONST c2 BINOP
with LOAD_CONST binop(c1,c2)
The consts table must still be in list form so that the
new constant can be appended.
Called with codestr pointing to the first LOAD_CONST.
Abandons the transformation if the folding fails (i.e. 1+'a').
If the new constant is a sequence, only folds when the size
is below a threshold value. That keeps pyc files from
becoming large in the presence of code like: (None,)*1000.
*/
static int
fold_binops_on_constants(unsigned char *codestr, PyObject *consts)
{
PyObject *newconst, *v, *w;
Py_ssize_t len_consts, size;
int opcode;
/* Pre-conditions */
assert(PyList_CheckExact(consts));
assert(codestr[0] == LOAD_CONST);
assert(codestr[3] == LOAD_CONST);
/* Create new constant */
v = PyList_GET_ITEM(consts, GETARG(codestr, 0));
w = PyList_GET_ITEM(consts, GETARG(codestr, 3));
opcode = codestr[6];
switch (opcode) {
case BINARY_POWER:
newconst = PyNumber_Power(v, w, Py_None);
break;
case BINARY_MULTIPLY:
newconst = PyNumber_Multiply(v, w);
break;
case BINARY_DIVIDE:
/* Cannot fold this operation statically since
the result can depend on the run-time presence
of the -Qnew flag */
return 0;
case BINARY_TRUE_DIVIDE:
newconst = PyNumber_TrueDivide(v, w);
break;
case BINARY_FLOOR_DIVIDE:
newconst = PyNumber_FloorDivide(v, w);
break;
case BINARY_MODULO:
newconst = PyNumber_Remainder(v, w);
break;
case BINARY_ADD:
newconst = PyNumber_Add(v, w);
break;
case BINARY_SUBTRACT:
newconst = PyNumber_Subtract(v, w);
break;
case BINARY_SUBSCR:
newconst = PyObject_GetItem(v, w);
/* #5057: if v is unicode, there might be differences between
wide and narrow builds in cases like u'\U00012345'[0].
Wide builds will return a non-BMP char, whereas narrow builds
will return a surrogate. In both the cases skip the
optimization in order to produce compatible pycs.
*/
if (newconst != NULL &&
PyUnicode_Check(v) && PyUnicode_Check(newconst)) {
Py_UNICODE ch = PyUnicode_AS_UNICODE(newconst)[0];
#ifdef Py_UNICODE_WIDE
if (ch > 0xFFFF) {
#else
if (ch >= 0xD800 && ch <= 0xDFFF) {
#endif
Py_DECREF(newconst);
return 0;
}
}
break;
case BINARY_LSHIFT:
newconst = PyNumber_Lshift(v, w);
break;
case BINARY_RSHIFT:
newconst = PyNumber_Rshift(v, w);
break;
case BINARY_AND:
newconst = PyNumber_And(v, w);
break;
case BINARY_XOR:
newconst = PyNumber_Xor(v, w);
break;
case BINARY_OR:
newconst = PyNumber_Or(v, w);
break;
default:
/* Called with an unknown opcode */
PyErr_Format(PyExc_SystemError,
"unexpected binary operation %d on a constant",
opcode);
return 0;
}
if (newconst == NULL) {
PyErr_Clear();
return 0;
}
size = PyObject_Size(newconst);
if (size == -1)
PyErr_Clear();
else if (size > 20) {
Py_DECREF(newconst);
return 0;
}
/* Append folded constant into consts table */
len_consts = PyList_GET_SIZE(consts);
if (PyList_Append(consts, newconst)) {
Py_DECREF(newconst);
return 0;
}
Py_DECREF(newconst);
/* Write NOP NOP NOP NOP LOAD_CONST newconst */
memset(codestr, NOP, 4);
codestr[4] = LOAD_CONST;
SETARG(codestr, 4, len_consts);
return 1;
}
static int
fold_unaryops_on_constants(unsigned char *codestr, PyObject *consts)
{
PyObject *newconst=NULL, *v;
Py_ssize_t len_consts;
int opcode;
/* Pre-conditions */
assert(PyList_CheckExact(consts));
assert(codestr[0] == LOAD_CONST);
/* Create new constant */
v = PyList_GET_ITEM(consts, GETARG(codestr, 0));
opcode = codestr[3];
switch (opcode) {
case UNARY_NEGATIVE:
/* Preserve the sign of -0.0 */
if (PyObject_IsTrue(v) == 1)
newconst = PyNumber_Negative(v);
break;
case UNARY_CONVERT:
newconst = PyObject_Repr(v);
break;
case UNARY_INVERT:
newconst = PyNumber_Invert(v);
break;
default:
/* Called with an unknown opcode */
PyErr_Format(PyExc_SystemError,
"unexpected unary operation %d on a constant",
opcode);
return 0;
}
if (newconst == NULL) {
PyErr_Clear();
return 0;
}
/* Append folded constant into consts table */
len_consts = PyList_GET_SIZE(consts);
if (PyList_Append(consts, newconst)) {
Py_DECREF(newconst);
return 0;
}
Py_DECREF(newconst);
/* Write NOP LOAD_CONST newconst */
codestr[0] = NOP;
codestr[1] = LOAD_CONST;
SETARG(codestr, 1, len_consts);
return 1;
}
static PyObject *
eval_frame(PyFrameObject *f)
{
LOG("> eval_frame\n"); {
PyObject **stack_pointer; /* Next free slot in value stack */
register unsigned char *next_instr;
register int opcode=0; /* Current opcode */
register int oparg=0; /* Current opcode argument, if any */
register enum why_code why; /* Reason for block stack unwind */
register int err; /* Error status -- nonzero if error */
register PyObject *x; /* Result object -- NULL if error */
register PyObject *t, *u, *v; /* Temporary objects popped off stack */
register PyObject *w;
register PyObject **fastlocals, **freevars;
PyObject *retval = NULL; /* Return value */
PyThreadState *tstate = PyThreadState_GET();
PyCodeObject *co;
unsigned char *first_instr;
PyObject *names;
PyObject *consts;
/* Tuple access macros */
#define GETITEM(v, i) PyTuple_GET_ITEM((PyTupleObject *)(v), (i))
/* Code access macros */
#define INSTR_OFFSET() (next_instr - first_instr)
#define NEXTOP() (*next_instr++)
#define NEXTARG() (next_instr += 2, (next_instr[-1]<<8) + next_instr[-2])
#define JUMPTO(x) (next_instr = first_instr + (x))
#define JUMPBY(x) (next_instr += (x))
/* OpCode prediction macros
Some opcodes tend to come in pairs thus making it possible to predict
the second code when the first is run. For example, COMPARE_OP is often
followed by JUMP_IF_FALSE or JUMP_IF_TRUE. And, those opcodes are often
followed by a POP_TOP.
Verifying the prediction costs a single high-speed test of register
variable against a constant. If the pairing was good, then the
processor has a high likelihood of making its own successful branch
prediction which results in a nearly zero overhead transition to the
next opcode.
A successful prediction saves a trip through the eval-loop including
its two unpredictable branches, the HASARG test and the switch-case.
*/
#define PREDICT(op) if (*next_instr == op) goto PRED_##op
#define PREDICTED(op) PRED_##op: next_instr++
#define PREDICTED_WITH_ARG(op) PRED_##op: oparg = (next_instr[2]<<8) + \
next_instr[1]; next_instr += 3
/* Stack manipulation macros */
#define STACK_LEVEL() (stack_pointer - f->f_valuestack)
#define EMPTY() (STACK_LEVEL() == 0)
#define TOP() (stack_pointer[-1])
#define SECOND() (stack_pointer[-2])
#define THIRD() (stack_pointer[-3])
#define FOURTH() (stack_pointer[-4])
#define SET_TOP(v) (stack_pointer[-1] = (v))
#define SET_SECOND(v) (stack_pointer[-2] = (v))
#define SET_THIRD(v) (stack_pointer[-3] = (v))
#define SET_FOURTH(v) (stack_pointer[-4] = (v))
#define BASIC_STACKADJ(n) (stack_pointer += n)
#define BASIC_PUSH(v) (*stack_pointer++ = (v))
#define BASIC_POP() (*--stack_pointer)
#define PUSH(v) BASIC_PUSH(v)
#define POP() BASIC_POP()
#define STACKADJ(n) BASIC_STACKADJ(n)
/* Local variable macros */
#define GETLOCAL(i) (fastlocals[i])
/* The SETLOCAL() macro must not DECREF the local variable in-place and
then store the new value; it must copy the old value to a temporary
value, then store the new value, and then DECREF the temporary value.
This is because it is possible that during the DECREF the frame is
accessed by other code (e.g. a __del__ method or gc.collect()) and the
variable would be pointing to already-freed memory. */
#define SETLOCAL(i, value) do { PyObject *tmp = GETLOCAL(i); \
GETLOCAL(i) = value; \
Py_XDECREF(tmp); } while (0)
/* Start of code */
if (f == NULL)
return NULL;
/* push frame */
if (++tstate->recursion_depth > recursion_limit) {
--tstate->recursion_depth;
/* ERROR */
tstate->frame = f->f_back;
return NULL;
}
tstate->frame = f;
/* tracing elided */
co = f->f_code;
names = co->co_names;
consts = co->co_consts;
fastlocals = f->f_localsplus;
freevars = f->f_localsplus + f->f_nlocals;
_PyCode_GETCODEPTR(co, &first_instr);
/* An explanation is in order for the next line.
f->f_lasti now refers to the index of the last instruction
executed. You might think this was obvious from the name, but
this wasn't always true before 2.3! PyFrame_New now sets
f->f_lasti to -1 (i.e. the index *before* the first instruction)
and YIELD_VALUE doesn't fiddle with f_lasti any more. So this
does work. Promise. */
next_instr = first_instr + f->f_lasti + 1;
stack_pointer = f->f_stacktop;
f->f_stacktop = NULL; /* remains NULL unless yield suspends frame */
why = WHY_NOT;
err = 0;
x = Py_None; /* Not a reference, just anything non-NULL */
w = NULL;
for (;;) {
/* Do periodic things. Doing this every time through
the loop would add too much overhead, so we do it
only every Nth instruction. We also do it if
``things_to_do'' is set, i.e. when an asynchronous
event needs attention (e.g. a signal handler or
async I/O handler); see Py_AddPendingCall() and
Py_MakePendingCalls() above. */
if (--_Py_Ticker < 0) {
/* @@@ check for SETUP_FINALLY elided */
_Py_Ticker = _Py_CheckInterval;
tstate->tick_counter++;
if (things_to_do) {
if (Py_MakePendingCalls() < 0) {
why = WHY_EXCEPTION;
goto on_error;
}
}
}
fast_next_opcode:
f->f_lasti = INSTR_OFFSET();
/* Extract opcode and argument */
opcode = NEXTOP();
if (HAS_ARG(opcode))
oparg = NEXTARG();
/* Main switch on opcode */
switch (opcode) {
/* BEWARE!
It is essential that any operation that fails sets either
x to NULL, err to nonzero, or why to anything but WHY_NOT,
and that no operation that succeeds does this! */
/* case STOP_CODE: this is an error! */
case LOAD_FAST:
x = GETLOCAL(oparg);
if (x != NULL) {
Py_INCREF(x);
PUSH(x);
goto fast_next_opcode;
}
/* ERROR? */
break;
case STORE_FAST:
v = POP();
SETLOCAL(oparg, v);
continue;
case LOAD_CONST:
x = GETITEM(consts, oparg);
Py_INCREF(x);
PUSH(x);
goto fast_next_opcode;
PREDICTED(POP_TOP);
case POP_TOP:
v = POP();
Py_DECREF(v);
goto fast_next_opcode;
case UNARY_NOT:
v = TOP();
err = PyObject_IsTrue(v);
Py_DECREF(v);
if (err == 0) {
Py_INCREF(Py_True);
SET_TOP(Py_True);
continue;
}
else if (err > 0) {
Py_INCREF(Py_False);
SET_TOP(Py_False);
err = 0;
continue;
}
STACKADJ(-1);
break;
case BINARY_MODULO:
w = POP();
v = TOP();
x = PyNumber_Remainder(v, w);
Py_DECREF(v);
Py_DECREF(w);
SET_TOP(x);
if (x != NULL) continue;
break;
case BINARY_ADD:
w = POP();
v = TOP();
if (PyInt_CheckExact(v) && PyInt_CheckExact(w)) {
/* INLINE: int + int */
register long a, b, i;
a = PyInt_AS_LONG(v);
b = PyInt_AS_LONG(w);
i = a + b;
if ((i^a) < 0 && (i^b) < 0)
goto slow_add;
x = PyInt_FromLong(i);
}
else {
slow_add:
Py_FatalError("slow add not supported.");
}
Py_DECREF(v);
Py_DECREF(w);
SET_TOP(x);
if (x != NULL) continue;
break;
case STORE_SLICE+0:
case STORE_SLICE+1:
case STORE_SLICE+2:
case STORE_SLICE+3:
if ((opcode-STORE_SLICE) & 2)
w = POP();
else
w = NULL;
if ((opcode-STORE_SLICE) & 1)
v = POP();
else
v = NULL;
u = POP();
t = POP();
err = assign_slice(u, v, w, t); /* u[v:w] = t */
Py_DECREF(t);
Py_DECREF(u);
Py_XDECREF(v);
Py_XDECREF(w);
if (err == 0) continue;
break;
case STORE_SUBSCR:
w = POP();
v = POP();
u = POP();
/* v[w] = u */
err = PyObject_SetItem(v, w, u);
Py_DECREF(u);
Py_DECREF(v);
Py_DECREF(w);
if (err == 0) continue;
break;
case BINARY_SUBSCR:
w = POP();
v = TOP();
if (PyList_CheckExact(v) && PyInt_CheckExact(w)) {
/* INLINE: list[int] */
long i = PyInt_AsLong(w);
if (i < 0)
i += PyList_GET_SIZE(v);
if (i < 0 ||
i >= PyList_GET_SIZE(v)) {
/* ERROR */
printf("list index out of range\n");
x = NULL;
}
else {
x = PyList_GET_ITEM(v, i);
Py_INCREF(x);
}
}
else
x = PyObject_GetItem(v, w);
Py_DECREF(v);
Py_DECREF(w);
SET_TOP(x);
if (x != NULL) continue;
break;
case BINARY_AND:
w = POP();
v = TOP();
x = PyNumber_And(v, w);
Py_DECREF(v);
Py_DECREF(w);
SET_TOP(x);
if (x != NULL) continue;
break;
case PRINT_ITEM:
v = POP();
PyObject_Print(v);
Py_DECREF(v);
break;
case PRINT_NEWLINE:
printf("\n");
break;
case RETURN_VALUE:
retval = POP();
why = WHY_RETURN;
break;
case POP_BLOCK:
{
PyTryBlock *b = PyFrame_BlockPop(f);
while (STACK_LEVEL() > b->b_level) {
v = POP();
Py_DECREF(v);
}
}
break;
case STORE_NAME:
w = GETITEM(names, oparg);
v = POP();
if ((x = f->f_locals) == NULL) {
/* ERROR */
printf("STORE_NAME ERROR\n");
break;
}
err = PyDict_SetItem(x, w, v);
Py_DECREF(v);
break;
case LOAD_NAME:
w = GETITEM(names, oparg);
if ((x = f->f_locals) == NULL) {
/* ERROR */
printf("LOAD_NAME ERROR\n");
break;
}
x = PyDict_GetItem(x, w);
if (x == NULL) {
x = PyDict_GetItem(f->f_globals, w);
if (x == NULL) {
x = PyDict_GetItem(f->f_builtins, w);
if (x == NULL) {
printf("can't find %s\n", ((PyStringObject *)w)->ob_sval);
/* format_exc_check_arg */
break;
}
}
}
Py_INCREF(x);
PUSH(x);
break;
case LOAD_GLOBAL:
w = GETITEM(names, oparg);
if (PyString_CheckExact(w)) {
/* Inline the PyDict_GetItem() calls.
WARNING: this is an extreme speed hack.
Do not try this at home. */
long hash = ((PyStringObject *)w)->ob_shash;
if (hash != -1) {
PyDictObject *d;
d = (PyDictObject *)(f->f_globals);
x = d->ma_lookup(d, w, hash)->me_value;
if (x != NULL) {
Py_INCREF(x);
PUSH(x);
continue;
}
d = (PyDictObject *)(f->f_builtins);
x = d->ma_lookup(d, w, hash)->me_value;
if (x != NULL) {
Py_INCREF(x);
PUSH(x);
continue;
}
goto load_global_error;
}
}
/* This is the un-inlined version of the code above */
x = PyDict_GetItem(f->f_globals, w);
if (x == NULL) {
x = PyDict_GetItem(f->f_builtins, w);
if (x == NULL) {
load_global_error:
printf("LOAD_GLOBAL ERROR %s", ((PyStringObject *)w)->ob_sval);
break;
}
}
Py_INCREF(x);
PUSH(x);
break;
case LOAD_ATTR:
w = GETITEM(names, oparg);
v = TOP();
x = PyObject_GetAttr(v, w);
Py_DECREF(v);
SET_TOP(x);
if (x != NULL) continue;
break;
case IMPORT_NAME:
w = GETITEM(names, oparg);
x = PyDict_GetItemString(f->f_builtins, "__import__");
if (x == NULL) {
printf("__import__ not found");
break;
}
u = TOP();
w = Py_BuildValue("(O)", w);
Py_DECREF(u);
if (w == NULL) {
u = POP();
x = NULL;
break;
}
x = PyEval_CallObject(x, w);
Py_DECREF(w);
SET_TOP(x);
if (x != NULL) continue;
break;
case JUMP_FORWARD:
JUMPBY(oparg);
goto fast_next_opcode;
PREDICTED_WITH_ARG(JUMP_IF_FALSE);
case JUMP_IF_FALSE:
w = TOP();
if (w == Py_True) {
PREDICT(POP_TOP);
goto fast_next_opcode;
}
if (w == Py_False) {
JUMPBY(oparg);
goto fast_next_opcode;
}
err = PyObject_IsTrue(w);
if (err > 0)
err = 0;
else if (err == 0)
JUMPBY(oparg);
else
break;
continue;
case JUMP_ABSOLUTE:
JUMPTO(oparg);
continue;
case SETUP_LOOP:
PyFrame_BlockSetup(f, opcode, INSTR_OFFSET() + oparg, STACK_LEVEL());
continue;
case CALL_FUNCTION:
x = call_function(&stack_pointer, oparg);
PUSH(x);
if (x != NULL)
continue;
break;
case MAKE_FUNCTION:
v = POP(); /* code object */
x = PyFunction_New(v, f->f_globals);
Py_DECREF(v);
/* XXX Maybe this should be a separate opcode? */
if (x != NULL && oparg > 0) {
v = PyTuple_New(oparg);
if (v == NULL) {
Py_DECREF(x);
x = NULL;
break;
}
while (--oparg >= 0) {
w = POP();
PyTuple_SET_ITEM(v, oparg, w);
}
err = PyFunction_SetDefaults(x, v);
Py_DECREF(v);
}
PUSH(x);
break;
case SET_LINENO:
break;
default:
printf("opcode: %d\n", opcode);
Py_FatalError("unknown opcode");
} /* switch */
on_error:
if (why == WHY_NOT) {
if (err == 0 && x != NULL) {
continue; /* Normal, fast path */
}
why = WHY_EXCEPTION;
x = Py_None;
err = 0;
}
/* End the loop if we still have an error (or return) */
if (why != WHY_NOT)
break;
} /* main loop */
if (why != WHY_YIELD) {
/* Pop remaining stack entries -- but when yielding */
while (!EMPTY()) {
v = POP();
Py_XDECREF(v);
}
}
if (why != WHY_RETURN && why != WHY_YIELD)
retval = NULL;
/* pop frame */
--tstate->recursion_depth;
tstate->frame = f->f_back;
return retval;
}}
/* "/home/richard/private/Working/snowball/pystemmer/src/Stemmer.pyx":68 */
Py_INCREF(__pyx_v_py_algs);
__pyx_r = __pyx_v_py_algs;
goto __pyx_L0;
__pyx_r = Py_None; Py_INCREF(Py_None);
goto __pyx_L0;
__pyx_L1:;
Py_XDECREF(__pyx_1);
Py_XDECREF(__pyx_3);
Py_XDECREF(__pyx_4);
__Pyx_AddTraceback("Stemmer.algorithms");
__pyx_r = 0;
__pyx_L0:;
Py_DECREF(__pyx_v_py_algs);
Py_DECREF(__pyx_v_aliases);
return __pyx_r;
}
static PyObject *__pyx_f_7Stemmer_version(PyObject *__pyx_self, PyObject *__pyx_args, PyObject *__pyx_kwds); /*proto*/
static char __pyx_doc_7Stemmer_version[] = "Get the version string of the stemming module.\n\n This version number is for the Stemmer module as a whole (not for an\n individual stemming algorithm).\n\n ";
static PyObject *__pyx_f_7Stemmer_version(PyObject *__pyx_self, PyObject *__pyx_args, PyObject *__pyx_kwds) {
PyObject *__pyx_r;
static char *__pyx_argnames[] = {0};
if (!PyArg_ParseTupleAndKeywords(__pyx_args, __pyx_kwds, "", __pyx_argnames)) return 0;
Py_INCREF(__pyx_k2p);
__pyx_r = __pyx_k2p;
goto __pyx_L0;
__pyx_r = Py_None; Py_INCREF(Py_None);
__pyx_L0:;
return __pyx_r;
}
static int __pyx_f_7Stemmer_7Stemmer___init__(PyObject *__pyx_v_self, PyObject *__pyx_args, PyObject *__pyx_kwds); /*proto*/
static int __pyx_f_7Stemmer_7Stemmer___init__(PyObject *__pyx_v_self, PyObject *__pyx_args, PyObject *__pyx_kwds) {
PyObject *__pyx_v_algorithm = 0;
int __pyx_v_maxCacheSize;
int __pyx_r;
char *__pyx_1;
int __pyx_2;
PyObject *__pyx_3 = 0;
PyObject *__pyx_4 = 0;
static char *__pyx_argnames[] = {"algorithm","maxCacheSize",0};
__pyx_v_maxCacheSize = __pyx_d2;
if (!PyArg_ParseTupleAndKeywords(__pyx_args, __pyx_kwds, "O|i", __pyx_argnames, &__pyx_v_algorithm, &__pyx_v_maxCacheSize)) return -1;
Py_INCREF(__pyx_v_self);
Py_INCREF(__pyx_v_algorithm);
/* "/home/richard/private/Working/snowball/pystemmer/src/Stemmer.pyx":118 */
__pyx_1 = PyString_AsString(__pyx_v_algorithm); if (!__pyx_1) {__pyx_filename = __pyx_f[0]; __pyx_lineno = 118; goto __pyx_L1;}
((struct __pyx_obj_7Stemmer_Stemmer *)__pyx_v_self)->cobj = sb_stemmer_new(__pyx_1,__pyx_k3);
/* "/home/richard/private/Working/snowball/pystemmer/src/Stemmer.pyx":119 */
__pyx_2 = (((struct __pyx_obj_7Stemmer_Stemmer *)__pyx_v_self)->cobj == NULL);
if (__pyx_2) {
__pyx_3 = PyNumber_Remainder(__pyx_k4p, __pyx_v_algorithm); if (!__pyx_3) {__pyx_filename = __pyx_f[0]; __pyx_lineno = 120; goto __pyx_L1;}
__pyx_4 = PyTuple_New(1); if (!__pyx_4) {__pyx_filename = __pyx_f[0]; __pyx_lineno = 120; goto __pyx_L1;}
PyTuple_SET_ITEM(__pyx_4, 0, __pyx_3);
__pyx_3 = 0;
__pyx_3 = PyObject_CallObject(PyExc_KeyError, __pyx_4); if (!__pyx_3) {__pyx_filename = __pyx_f[0]; __pyx_lineno = 120; goto __pyx_L1;}
Py_DECREF(__pyx_4); __pyx_4 = 0;
__Pyx_Raise(__pyx_3, 0, 0);
Py_DECREF(__pyx_3); __pyx_3 = 0;
{__pyx_filename = __pyx_f[0]; __pyx_lineno = 120; goto __pyx_L1;}
goto __pyx_L2;
}
__pyx_L2:;
/* "/home/richard/private/Working/snowball/pystemmer/src/Stemmer.pyx":121 */
((struct __pyx_obj_7Stemmer_Stemmer *)__pyx_v_self)->max_cache_size = __pyx_v_maxCacheSize;
/* "/home/richard/private/Working/snowball/pystemmer/src/Stemmer.pyx":122 */
__pyx_4 = PyInt_FromLong(0); if (!__pyx_4) {__pyx_filename = __pyx_f[0]; __pyx_lineno = 122; goto __pyx_L1;}
Py_DECREF(((struct __pyx_obj_7Stemmer_Stemmer *)__pyx_v_self)->counter);
((struct __pyx_obj_7Stemmer_Stemmer *)__pyx_v_self)->counter = __pyx_4;
__pyx_4 = 0;
/* "/home/richard/private/Working/snowball/pystemmer/src/Stemmer.pyx":123 */
__pyx_3 = PyDict_New(); if (!__pyx_3) {__pyx_filename = __pyx_f[0]; __pyx_lineno = 123; goto __pyx_L1;}
Py_DECREF(((struct __pyx_obj_7Stemmer_Stemmer *)__pyx_v_self)->cache);
((struct __pyx_obj_7Stemmer_Stemmer *)__pyx_v_self)->cache = __pyx_3;
__pyx_3 = 0;
__pyx_r = 0;
goto __pyx_L0;
__pyx_L1:;
Py_XDECREF(__pyx_3);
Py_XDECREF(__pyx_4);
__Pyx_AddTraceback("Stemmer.Stemmer.__init__");
__pyx_r = -1;
__pyx_L0:;
Py_DECREF(__pyx_v_self);
Py_DECREF(__pyx_v_algorithm);
return __pyx_r;
}
/* Replace LOAD_CONST c1. LOAD_CONST c2 BINOP
with LOAD_CONST binop(c1,c2)
The consts table must still be in list form so that the
new constant can be appended.
Called with codestr pointing to the first LOAD_CONST.
Abandons the transformation if the folding fails (i.e. 1+'a').
If the new constant is a sequence, only folds when the size
is below a threshold value. That keeps pyc files from
becoming large in the presence of code like: (None,)*1000.
*/
static int
fold_binops_on_constants(unsigned char *codestr, PyObject *consts)
{
PyObject *newconst, *v, *w;
Py_ssize_t len_consts, size;
int opcode;
/* Pre-conditions */
assert(PyList_CheckExact(consts));
assert(codestr[0] == LOAD_CONST);
assert(codestr[3] == LOAD_CONST);
/* Create new constant */
v = PyList_GET_ITEM(consts, GETARG(codestr, 0));
w = PyList_GET_ITEM(consts, GETARG(codestr, 3));
opcode = codestr[6];
switch (opcode) {
case BINARY_POWER:
newconst = PyNumber_Power(v, w, Py_None);
break;
case BINARY_MULTIPLY:
newconst = PyNumber_Multiply(v, w);
break;
case BINARY_DIVIDE:
/* Cannot fold this operation statically since
the result can depend on the run-time presence
of the -Qnew flag */
return 0;
case BINARY_TRUE_DIVIDE:
newconst = PyNumber_TrueDivide(v, w);
break;
case BINARY_FLOOR_DIVIDE:
newconst = PyNumber_FloorDivide(v, w);
break;
case BINARY_MODULO:
newconst = PyNumber_Remainder(v, w);
break;
case BINARY_ADD:
newconst = PyNumber_Add(v, w);
break;
case BINARY_SUBTRACT:
newconst = PyNumber_Subtract(v, w);
break;
case BINARY_SUBSCR:
newconst = PyObject_GetItem(v, w);
break;
case BINARY_LSHIFT:
newconst = PyNumber_Lshift(v, w);
break;
case BINARY_RSHIFT:
newconst = PyNumber_Rshift(v, w);
break;
case BINARY_AND:
newconst = PyNumber_And(v, w);
break;
case BINARY_XOR:
newconst = PyNumber_Xor(v, w);
break;
case BINARY_OR:
newconst = PyNumber_Or(v, w);
break;
default:
/* Called with an unknown opcode */
PyErr_Format(PyExc_SystemError,
"unexpected binary operation %d on a constant",
opcode);
return 0;
}
if (newconst == NULL) {
PyErr_Clear();
return 0;
}
size = PyObject_Size(newconst);
if (size == -1)
PyErr_Clear();
else if (size > 20) {
Py_DECREF(newconst);
return 0;
}
/* Append folded constant into consts table */
len_consts = PyList_GET_SIZE(consts);
if (PyList_Append(consts, newconst)) {
Py_DECREF(newconst);
return 0;
}
Py_DECREF(newconst);
/* Write NOP NOP NOP NOP LOAD_CONST newconst */
memset(codestr, NOP, 4);
codestr[4] = LOAD_CONST;
SETARG(codestr, 4, len_consts);
return 1;
}
static PyObject *__pyx_pf_5hello_say_hello_to(PyObject *__pyx_self, PyObject *__pyx_v_name) {
int __pyx_v_n;
int __pyx_v_m;
PyObject *__pyx_r = NULL;
__Pyx_RefNannyDeclarations
PyObject *__pyx_t_1 = NULL;
PyObject *__pyx_t_2 = NULL;
int __pyx_lineno = 0;
const char *__pyx_filename = NULL;
int __pyx_clineno = 0;
__Pyx_RefNannySetupContext("say_hello_to");
__pyx_self = __pyx_self;
/* "hello.pyx":2
* def say_hello_to(name):
* cdef int n = 18932808299 # <<<<<<<<<<<<<<
* cdef int m = n*n
* print("Hello %s! %s" % (name,m))
*/
__pyx_v_n = 18932808299;
/* "hello.pyx":3
* def say_hello_to(name):
* cdef int n = 18932808299
* cdef int m = n*n # <<<<<<<<<<<<<<
* print("Hello %s! %s" % (name,m))
*/
__pyx_v_m = (__pyx_v_n * __pyx_v_n);
/* "hello.pyx":4
* cdef int n = 18932808299
* cdef int m = n*n
* print("Hello %s! %s" % (name,m)) # <<<<<<<<<<<<<<
*/
__pyx_t_1 = PyInt_FromLong(__pyx_v_m); if (unlikely(!__pyx_t_1)) {__pyx_filename = __pyx_f[0]; __pyx_lineno = 4; __pyx_clineno = __LINE__; goto __pyx_L1_error;}
__Pyx_GOTREF(__pyx_t_1);
__pyx_t_2 = PyTuple_New(2); if (unlikely(!__pyx_t_2)) {__pyx_filename = __pyx_f[0]; __pyx_lineno = 4; __pyx_clineno = __LINE__; goto __pyx_L1_error;}
__Pyx_GOTREF(((PyObject *)__pyx_t_2));
__Pyx_INCREF(__pyx_v_name);
PyTuple_SET_ITEM(__pyx_t_2, 0, __pyx_v_name);
__Pyx_GIVEREF(__pyx_v_name);
PyTuple_SET_ITEM(__pyx_t_2, 1, __pyx_t_1);
__Pyx_GIVEREF(__pyx_t_1);
__pyx_t_1 = 0;
__pyx_t_1 = PyNumber_Remainder(((PyObject *)__pyx_kp_s_1), ((PyObject *)__pyx_t_2)); if (unlikely(!__pyx_t_1)) {__pyx_filename = __pyx_f[0]; __pyx_lineno = 4; __pyx_clineno = __LINE__; goto __pyx_L1_error;}
__Pyx_GOTREF(((PyObject *)__pyx_t_1));
__Pyx_DECREF(((PyObject *)__pyx_t_2)); __pyx_t_2 = 0;
if (__Pyx_PrintOne(0, ((PyObject *)__pyx_t_1)) < 0) {__pyx_filename = __pyx_f[0]; __pyx_lineno = 4; __pyx_clineno = __LINE__; goto __pyx_L1_error;}
__Pyx_DECREF(((PyObject *)__pyx_t_1)); __pyx_t_1 = 0;
__pyx_r = Py_None; __Pyx_INCREF(Py_None);
goto __pyx_L0;
__pyx_L1_error:;
__Pyx_XDECREF(__pyx_t_1);
__Pyx_XDECREF(__pyx_t_2);
__Pyx_AddTraceback("hello.say_hello_to", __pyx_clineno, __pyx_lineno, __pyx_filename);
__pyx_r = NULL;
__pyx_L0:;
__Pyx_XGIVEREF(__pyx_r);
__Pyx_RefNannyFinishContext();
return __pyx_r;
}