VOID asic_write_bcn_buf(RTMP_ADAPTER *pAd, UCHAR *tmac_info, INT info_len, UCHAR *bcn_buf, INT buf_len, UINT32 hw_addr)
{
INT i;
UCHAR *ptr = tmac_info;
UINT32 longValue, reg_base = hw_addr;
#ifdef RT_BIG_ENDIAN
RTMPWIEndianChange(pAd, tmac_info, TYPE_TXWI);
#endif
for (i = 0; i < info_len; i += 4)
{
longValue = *ptr + (*(ptr+1)<<8) + (*(ptr+2)<<16) + (*(ptr+3)<<24);
RTMP_CHIP_UPDATE_BEACON(pAd, reg_base + i, longValue, 4);
ptr += 4;
}
/* update BEACON frame content. start right after the TXWI field. */
ptr = bcn_buf;
#ifdef RT_BIG_ENDIAN
RTMPFrameEndianChange(pAd, ptr, DIR_WRITE, FALSE);
#endif
reg_base = hw_addr + info_len;
for (i= 0; i< buf_len; i+=4)
{
longValue = *ptr + (*(ptr+1)<<8) + (*(ptr+2)<<16) + (*(ptr+3)<<24);
RTMP_CHIP_UPDATE_BEACON(pAd, reg_base + i, longValue, 4);
ptr += 4;
}
}
VOID APMakeAllBssBeacon(RTMP_ADAPTER *pAd)
{
INT i;
UCHAR NumOfBcns;
/* choose the Beacon number */
NumOfBcns = GetBcnNum(pAd);
#if defined(RTMP_MAC) || defined(RLT_MAC)
if ((pAd->chipCap.hif_type == HIF_RTMP) || (pAd->chipCap.hif_type == HIF_RLT)) {
INT j;
/*
before MakeBssBeacon, clear all beacon TxD's valid bit
Note: can not use MAX_MBSSID_NUM here, or
1. when MBSS_SUPPORT is enabled;
2. MAX_MBSSID_NUM will be 8;
3. if HW_BEACON_OFFSET is 0x0200,
we will overwrite other shared memory of chip.
use pAd->ApCfg.BssidNum to avoid the case is best
*/
UINT8 TXWISize = pAd->chipCap.TXWISize;
for (i=0; i<HW_BEACON_MAX_COUNT(pAd); i++)
{
for (j=0; j < TXWISize; j+=4)
{
RTMP_CHIP_UPDATE_BEACON(pAd, pAd->BeaconOffset[i] + j, 0, 4);
}
}
}
#endif /* defined(RTMP_MAC) || defined(RLT_MAC) */
for(i=0; i<pAd->ApCfg.BssidNum; i++)
APMakeBssBeacon(pAd, i);
AsicSetMbssMode(pAd, NumOfBcns);
}
VOID APMakeAllBssBeacon(
IN PRTMP_ADAPTER pAd)
{
INT i, j;
UINT32 regValue;
UCHAR NumOfMacs;
UCHAR NumOfBcns;
UINT8 TXWISize = pAd->chipCap.TXWISize;
/* before MakeBssBeacon, clear all beacon TxD's valid bit */
/* Note: can not use MAX_MBSSID_NUM here, or
1. when MBSS_SUPPORT is enabled;
2. MAX_MBSSID_NUM will be 8;
3. if HW_BEACON_OFFSET is 0x0200,
we will overwrite other shared memory SRAM of chip */
/* use pAd->ApCfg.BssidNum to avoid the case is best */
/* choose the Beacon number */
NumOfBcns = GetBcnNum(pAd);
for (i=0; i<HW_BEACON_MAX_COUNT(pAd); i++)
{
for (j=0; j < TXWISize; j+=4)
{
RTMP_CHIP_UPDATE_BEACON(pAd, pAd->BeaconOffset[i] + j, 0, 4);
}
}
for(i=0; i<pAd->ApCfg.BssidNum; i++)
{
APMakeBssBeacon(pAd, i);
}
RTMP_IO_READ32(pAd, MAC_BSSID_DW1, ®Value);
regValue &= 0x0000FFFF;
/*
Note:
1.The MAC address of Mesh and AP-Client link are different from Main BSSID.
2.If the Mesh link is included, its MAC address shall follow the last MBSSID's MAC by increasing 1.
3.If the AP-Client link is included, its MAC address shall follow the Mesh interface MAC by increasing 1.
*/
NumOfMacs = pAd->ApCfg.BssidNum + MAX_MESH_NUM + MAX_APCLI_NUM;
/* set Multiple BSSID mode */
if (NumOfMacs <= 1)
{
pAd->ApCfg.MacMask = ~(1-1);
/*regValue |= 0x0; */
}
else if (NumOfMacs <= 2)
{
if ((pAd->CurrentAddress[5] % 2 != 0)
)
DBGPRINT(RT_DEBUG_ERROR, ("The 2-BSSID mode is enabled, the BSSID byte5 MUST be the multiple of 2\n"));
regValue |= (1<<16);
pAd->ApCfg.MacMask = ~(2-1);
}
else if (NumOfMacs <= 4)
{
if (pAd->CurrentAddress[5] % 4 != 0)
DBGPRINT(RT_DEBUG_ERROR, ("The 4-BSSID mode is enabled, the BSSID byte5 MUST be the multiple of 4\n"));
regValue |= (2<<16);
pAd->ApCfg.MacMask = ~(4-1);
}
else if (NumOfMacs <= 8)
{
if (pAd->CurrentAddress[5] % 8 != 0)
DBGPRINT(RT_DEBUG_ERROR, ("The 8-BSSID mode is enabled, the BSSID byte5 MUST be the multiple of 8\n"));
regValue |= (3<<16);
pAd->ApCfg.MacMask = ~(8-1);
}
else if (NumOfMacs <= 16)
{
/* Set MULTI_BSSID_MODE_BIT4 in MAC register 0x1014 */
regValue |= (1<<22);
pAd->ApCfg.MacMask = ~(16-1);
}
/* set Multiple BSSID Beacon number */
if (NumOfBcns > 1)
{
if (NumOfBcns > 8)
regValue |= (((NumOfBcns - 1) >> 3) << 23);
regValue |= (((NumOfBcns - 1) & 0x7) << 18);
}
/* set as 0/1 bit-21 of MAC_BSSID_DW1(offset: 0x1014)
to disable/enable the new MAC address assignment. */
if (pAd->chipCap.MBSSIDMode >= MBSSID_MODE1)
{
regValue |= (1 << 21);
#ifdef ENHANCE_NEW_MBSSID_MODE
if (pAd->chipCap.MBSSIDMode == MBSSID_MODE2)
regValue |= (1 << 24);
else if (pAd->chipCap.MBSSIDMode == MBSSID_MODE3)
regValue |= (2 << 24);
else if (pAd->chipCap.MBSSIDMode == MBSSID_MODE4)
regValue |= (3 << 24);
else if (pAd->chipCap.MBSSIDMode == MBSSID_MODE5)
regValue |= (4 << 24);
else if (pAd->chipCap.MBSSIDMode == MBSSID_MODE6)
regValue |= (5 << 24);
#endif /* ENHANCE_NEW_MBSSID_MODE */
}
RTMP_IO_WRITE32(pAd, MAC_BSSID_DW1, regValue);
#ifdef HDR_TRANS_SUPPORT
/*
point WCID MAC table to 0x1800
This is for debug.
But HDR_TRANS doesn't work if you remove it.
Check after IC formal release.
*/
regValue |= 0x18000000;
RTMP_IO_WRITE32(pAd, HT_MAC_BSSID_DW1, regValue);
#endif /* HDR_TRANS_SUPPORT */
}
/*
==========================================================================
Description:
Pre-build a BEACON frame in the shared memory
==========================================================================
*/
VOID APMakeBssBeacon(RTMP_ADAPTER *pAd, INT apidx)
{
UCHAR DsLen = 1, SsidLen;
HEADER_802_11 BcnHdr;
LARGE_INTEGER FakeTimestamp;
ULONG FrameLen = 0;
PUCHAR pBeaconFrame = (PUCHAR)pAd->ApCfg.MBSSID[apidx].BeaconBuf;
UCHAR *ptr;
UINT i;
UINT32 longValue, reg_base;
HTTRANSMIT_SETTING BeaconTransmit = {.word = 0}; /* MGMT frame PHY rate setting when operatin at Ht rate. */
UCHAR PhyMode, SupRateLen;
UINT8 TXWISize = pAd->chipCap.TXWISize;
if(!BeaconTransmitRequired(pAd, apidx, &pAd->ApCfg.MBSSID[apidx]))
return;
PhyMode = pAd->ApCfg.MBSSID[apidx].PhyMode;
if (pAd->ApCfg.MBSSID[apidx].bHideSsid)
SsidLen = 0;
else
SsidLen = pAd->ApCfg.MBSSID[apidx].SsidLen;
MgtMacHeaderInit(pAd, &BcnHdr, SUBTYPE_BEACON, 0, BROADCAST_ADDR,
pAd->ApCfg.MBSSID[apidx].Bssid);
/* for update framelen to TxWI later. */
SupRateLen = pAd->CommonCfg.SupRateLen;
if (PhyMode == WMODE_B)
SupRateLen = 4;
MakeOutgoingFrame(pBeaconFrame, &FrameLen,
sizeof(HEADER_802_11), &BcnHdr,
TIMESTAMP_LEN, &FakeTimestamp,
2, &pAd->CommonCfg.BeaconPeriod,
2, &pAd->ApCfg.MBSSID[apidx].CapabilityInfo,
1, &SsidIe,
1, &SsidLen,
SsidLen, pAd->ApCfg.MBSSID[apidx].Ssid,
1, &SupRateIe,
1, &SupRateLen,
SupRateLen, pAd->CommonCfg.SupRate,
1, &DsIe,
1, &DsLen,
1, &pAd->CommonCfg.Channel,
END_OF_ARGS);
if ((pAd->CommonCfg.ExtRateLen) && (PhyMode != WMODE_B))
{
ULONG TmpLen;
MakeOutgoingFrame(pBeaconFrame+FrameLen, &TmpLen,
1, &ExtRateIe,
1, &pAd->CommonCfg.ExtRateLen,
pAd->CommonCfg.ExtRateLen, pAd->CommonCfg.ExtRate,
END_OF_ARGS);
FrameLen += TmpLen;
}
/* add country IE, power constraint IE */
if (pAd->CommonCfg.bCountryFlag)
{
ULONG TmpLen, TmpLen2=0;
UCHAR *TmpFrame = NULL;
UCHAR CountryIe = IE_COUNTRY;
os_alloc_mem(NULL, (UCHAR **)&TmpFrame, 256);
if (TmpFrame != NULL)
{
NdisZeroMemory(TmpFrame, 256);
/* prepare channel information */
#ifdef EXT_BUILD_CHANNEL_LIST
BuildBeaconChList(pAd, TmpFrame, &TmpLen2);
#else
{
UCHAR MaxTxPower = GetCuntryMaxTxPwr(pAd, pAd->CommonCfg.Channel);
MakeOutgoingFrame(TmpFrame+TmpLen2, &TmpLen,
1, &pAd->ChannelList[0].Channel,
1, &pAd->ChannelListNum,
1, &MaxTxPower,
END_OF_ARGS);
TmpLen2 += TmpLen;
}
#endif /* EXT_BUILD_CHANNEL_LIST */
/* need to do the padding bit check, and concatenate it */
if ((TmpLen2%2) == 0)
{
UCHAR TmpLen3 = TmpLen2+4;
MakeOutgoingFrame(pBeaconFrame+FrameLen,&TmpLen,
1, &CountryIe,
1, &TmpLen3,
3, pAd->CommonCfg.CountryCode,
TmpLen2+1, TmpFrame,
END_OF_ARGS);
}
else
{
UCHAR TmpLen3 = TmpLen2+3;
MakeOutgoingFrame(pBeaconFrame+FrameLen,&TmpLen,
1, &CountryIe,
1, &TmpLen3,
3, pAd->CommonCfg.CountryCode,
TmpLen2, TmpFrame,
END_OF_ARGS);
}
FrameLen += TmpLen;
os_free_mem(NULL, TmpFrame);
}
else
DBGPRINT(RT_DEBUG_ERROR, ("%s: Allocate memory fail!!!\n", __FUNCTION__));
}
#ifdef DOT11_N_SUPPORT
/* AP Channel Report */
{
UCHAR APChannelReportIe = IE_AP_CHANNEL_REPORT;
ULONG TmpLen;
/*
802.11n D2.0 Annex J, USA regulatory
class 32, channel set 1~7
class 33, channel set 5-11
*/
UCHAR rclass32[]={32, 1, 2, 3, 4, 5, 6, 7};
UCHAR rclass33[]={33, 5, 6, 7, 8, 9, 10, 11};
UCHAR rclasslen = 8; /*sizeof(rclass32); */
if (PhyMode == (WMODE_B | WMODE_G | WMODE_GN))
{
MakeOutgoingFrame(pBeaconFrame+FrameLen,&TmpLen,
1, &APChannelReportIe,
1, &rclasslen,
rclasslen, rclass32,
1, &APChannelReportIe,
1, &rclasslen,
rclasslen, rclass33,
END_OF_ARGS);
FrameLen += TmpLen;
}
}
#endif /* DOT11_N_SUPPORT */
RTMPWriteTxWI(pAd, &pAd->BeaconTxWI, FALSE, FALSE, TRUE, FALSE, FALSE, TRUE, 0, BSS0Mcast_WCID,
FrameLen, PID_MGMT, 0, 0,IFS_HTTXOP, FALSE, &BeaconTransmit);
/*
step 6. move BEACON TXD and frame content to on-chip memory
*/
ptr = (PUCHAR)&pAd->BeaconTxWI;
#ifdef RT_BIG_ENDIAN
RTMPWIEndianChange(pAd, ptr, TYPE_TXWI);
#endif
reg_base = pAd->BeaconOffset[pAd->ApCfg.MBSSID[apidx].BcnBufIdx];
for (i=0; i < TXWISize; i+=4)
{
longValue = *ptr + (*(ptr+1)<<8) + (*(ptr+2)<<16) + (*(ptr+3)<<24);
RTMP_CHIP_UPDATE_BEACON(pAd, reg_base + i, longValue, 4);
ptr += 4;
}
/* update BEACON frame content. start right after the TXWI field. */
ptr = (PUCHAR)pAd->ApCfg.MBSSID[apidx].BeaconBuf;
#ifdef RT_BIG_ENDIAN
RTMPFrameEndianChange(pAd, ptr, DIR_WRITE, FALSE);
#endif
reg_base = pAd->BeaconOffset[pAd->ApCfg.MBSSID[apidx].BcnBufIdx] + TXWISize;
for (i= 0; i< FrameLen; i+=4)
{
longValue = *ptr + (*(ptr+1)<<8) + (*(ptr+2)<<16) + (*(ptr+3)<<24);
RTMP_CHIP_UPDATE_BEACON(pAd, reg_base + i, longValue, 4);
ptr += 4;
}
pAd->ApCfg.MBSSID[apidx].TimIELocationInBeacon = (UCHAR)FrameLen;
pAd->ApCfg.MBSSID[apidx].CapabilityInfoLocationInBeacon = sizeof(HEADER_802_11) + TIMESTAMP_LEN + 2;
}
/*
==========================================================================
Description:
Update the BEACON frame in the shared memory. Because TIM IE is variable
length. other IEs after TIM has to shift and total frame length may change
for each BEACON period.
Output:
pAd->ApCfg.MBSSID[apidx].CapabilityInfo
pAd->ApCfg.ErpIeContent
==========================================================================
*/
VOID APUpdateBeaconFrame(RTMP_ADAPTER *pAd, INT apidx)
{
UCHAR *pBeaconFrame = (PUCHAR)pAd->ApCfg.MBSSID[apidx].BeaconBuf;
UCHAR *ptr;
ULONG FrameLen = pAd->ApCfg.MBSSID[apidx].TimIELocationInBeacon;
ULONG UpdatePos = pAd->ApCfg.MBSSID[apidx].TimIELocationInBeacon;
UCHAR RSNIe=IE_WPA, RSNIe2=IE_WPA2;
UCHAR ID_1B, TimFirst, TimLast, *pTim;
MULTISSID_STRUCT *pMbss;
COMMON_CONFIG *pComCfg;
UCHAR PhyMode;
BOOLEAN bHasWpsIE = FALSE;
UINT i;
HTTRANSMIT_SETTING BeaconTransmit = {.word = 0}; /* MGMT frame PHY rate setting when operatin at Ht rate. */
pMbss = &pAd->ApCfg.MBSSID[apidx];
pComCfg = &pAd->CommonCfg;
PhyMode = pMbss->PhyMode;
if(!BeaconTransmitRequired(pAd, apidx, pMbss))
return;
/*
step 1 - update BEACON's Capability
*/
ptr = pBeaconFrame + pMbss->CapabilityInfoLocationInBeacon;
*ptr = (UCHAR)(pMbss->CapabilityInfo & 0x00ff);
*(ptr+1) = (UCHAR)((pMbss->CapabilityInfo & 0xff00) >> 8);
/*
step 2 - update TIM IE
TODO: enlarge TIM bitmap to support up to 64 STAs
TODO: re-measure if RT2600 TBTT interrupt happens faster than BEACON sent out time
*/
ptr = pBeaconFrame + pMbss->TimIELocationInBeacon;
*ptr = IE_TIM;
*(ptr + 2) = pAd->ApCfg.DtimCount;
*(ptr + 3) = pAd->ApCfg.DtimPeriod;
/* find the smallest AID (PS mode) */
TimFirst = 0; /* record first TIM byte != 0x00 */
TimLast = 0; /* record last TIM byte != 0x00 */
pTim = pMbss->TimBitmaps;
for(ID_1B=0; ID_1B<WLAN_MAX_NUM_OF_TIM; ID_1B++)
{
/* get the TIM indicating PS packets for 8 stations */
UCHAR tim_1B = pTim[ID_1B];
if (ID_1B == 0)
tim_1B &= 0xfe; /* skip bit0 bc/mc */
if (tim_1B == 0)
continue; /* find next 1B */
if (TimFirst == 0)
TimFirst = ID_1B;
TimLast = ID_1B;
}
/* fill TIM content to beacon buffer */
if (TimFirst & 0x01)
TimFirst --; /* find the even offset byte */
*(ptr + 1) = 3+(TimLast-TimFirst+1); /* TIM IE length */
*(ptr + 4) = TimFirst;
for(i=TimFirst; i<=TimLast; i++)
*(ptr + 5 + i - TimFirst) = pTim[i];
/* bit0 means backlogged mcast/bcast */
if (pAd->ApCfg.DtimCount == 0)
*(ptr + 4) |= (pMbss->TimBitmaps[WLAN_CT_TIM_BCMC_OFFSET] & 0x01);
/* adjust BEACON length according to the new TIM */
FrameLen += (2 + *(ptr+1));
#ifdef HOSTAPD_SUPPORT
if ( pAd->ApCfg.MBSSID[apidx].HostapdWPS && (pAd->ApCfg.MBSSID[apidx].WscIEBeacon.ValueLen))
bHasWpsIE = TRUE;
#endif
#ifdef WSC_AP_SUPPORT
/* add Simple Config Information Element */
if (((pAd->ApCfg.MBSSID[apidx].WscControl.WscConfMode >= 1) && (pAd->ApCfg.MBSSID[apidx].WscIEBeacon.ValueLen)))
{
bHasWpsIE = TRUE;
}
#endif /* WSC_AP_SUPPORT */
if (bHasWpsIE)
{
ULONG WscTmpLen = 0;
MakeOutgoingFrame(pBeaconFrame+FrameLen, &WscTmpLen,
pAd->ApCfg.MBSSID[apidx].WscIEBeacon.ValueLen, pAd->ApCfg.MBSSID[apidx].WscIEBeacon.Value,
END_OF_ARGS);
FrameLen += WscTmpLen;
}
#ifdef WSC_AP_SUPPORT
if ((pAd->ApCfg.MBSSID[apidx].WscControl.WscConfMode != WSC_DISABLE) &&
#ifdef DOT1X_SUPPORT
(pAd->ApCfg.MBSSID[apidx].IEEE8021X == FALSE) &&
#endif /* DOT1X_SUPPORT */
(pAd->ApCfg.MBSSID[apidx].WepStatus == Ndis802_11WEPEnabled))
{
/*
Non-WPS Windows XP and Vista PCs are unable to determine if a WEP enalbed network is static key based
or 802.1X based. If the legacy station gets an EAP-Rquest/Identity from the AP, it assume the WEP
network is 802.1X enabled & will prompt the user for 802.1X credentials. If the legacy station doesn't
receive anything after sending an EAPOL-Start, it will assume the WEP network is static key based and
prompt user for the WEP key. <<from "WPS and Static Key WEP Networks">>
A WPS enabled AP should include this IE in the beacon when the AP is hosting a static WEP key network.
The IE would be 7 bytes long with the Extended Capability field set to 0 (all bits zero)
http:msdn.microsoft.com/library/default.asp?url=/library/en-us/randz/protocol/securing_public_wi-fi_hotspots.asp
*/
ULONG TempLen = 0;
UCHAR PROVISION_SERVICE_IE[7] = {0xDD, 0x05, 0x00, 0x50, 0xF2, 0x05, 0x00};
MakeOutgoingFrame(pBeaconFrame+FrameLen, &TempLen,
7, PROVISION_SERVICE_IE,
END_OF_ARGS);
FrameLen += TempLen;
}
#endif /* WSC_AP_SUPPORT */
/* Update ERP */
if ((pComCfg->ExtRateLen) && (PhyMode != WMODE_B))
{
/* fill ERP IE */
ptr = (UCHAR *)pBeaconFrame + FrameLen; /* pTxD->DataByteCnt; */
*ptr = IE_ERP;
*(ptr + 1) = 1;
*(ptr + 2) = pAd->ApCfg.ErpIeContent;
FrameLen += 3;
}
#ifdef A_BAND_SUPPORT
/* fill up Channel Switch Announcement Element */
if ((pComCfg->Channel > 14)
&& (pComCfg->bIEEE80211H == 1)
&& (pAd->Dot11_H.RDMode == RD_SWITCHING_MODE))
{
ptr = pBeaconFrame + FrameLen;
*ptr = IE_CHANNEL_SWITCH_ANNOUNCEMENT;
*(ptr + 1) = 3;
*(ptr + 2) = 1;
*(ptr + 3) = pComCfg->Channel;
*(ptr + 4) = (pAd->Dot11_H.CSPeriod - pAd->Dot11_H.CSCount - 1);
ptr += 5;
FrameLen += 5;
#ifdef DOT11_N_SUPPORT
/* Extended Channel Switch Announcement Element */
if (pComCfg->bExtChannelSwitchAnnouncement)
{
HT_EXT_CHANNEL_SWITCH_ANNOUNCEMENT_IE HtExtChannelSwitchIe;
build_ext_channel_switch_ie(pAd, &HtExtChannelSwitchIe);
NdisMoveMemory(ptr, &HtExtChannelSwitchIe, sizeof(HT_EXT_CHANNEL_SWITCH_ANNOUNCEMENT_IE));
ptr += sizeof(HT_EXT_CHANNEL_SWITCH_ANNOUNCEMENT_IE);
FrameLen += sizeof(HT_EXT_CHANNEL_SWITCH_ANNOUNCEMENT_IE);
}
#endif /* DOT11_N_SUPPORT */
}
#endif /* A_BAND_SUPPORT */
#ifdef DOT11_N_SUPPORT
/* step 5. Update HT. Since some fields might change in the same BSS. */
if (WMODE_CAP_N(PhyMode) && (pMbss->DesiredHtPhyInfo.bHtEnable))
{
ULONG TmpLen;
UCHAR HtLen, HtLen1;
/*UCHAR i; */
#ifdef RT_BIG_ENDIAN
HT_CAPABILITY_IE HtCapabilityTmp;
ADD_HT_INFO_IE addHTInfoTmp;
/* USHORT b2lTmp, b2lTmp2; // no use */
#endif
/* add HT Capability IE */
HtLen = sizeof(pComCfg->HtCapability);
HtLen1 = sizeof(pComCfg->AddHTInfo);
#ifndef RT_BIG_ENDIAN
MakeOutgoingFrame(pBeaconFrame+FrameLen, &TmpLen,
1, &HtCapIe,
1, &HtLen,
HtLen, &pComCfg->HtCapability,
1, &AddHtInfoIe,
1, &HtLen1,
HtLen1, &pComCfg->AddHTInfo,
END_OF_ARGS);
#else
NdisMoveMemory(&HtCapabilityTmp, &pComCfg->HtCapability, HtLen);
*(USHORT *)(&HtCapabilityTmp.HtCapInfo) = SWAP16(*(USHORT *)(&HtCapabilityTmp.HtCapInfo));
#ifdef UNALIGNMENT_SUPPORT
{
EXT_HT_CAP_INFO extHtCapInfo;
NdisMoveMemory((PUCHAR)(&extHtCapInfo), (PUCHAR)(&HtCapabilityTmp.ExtHtCapInfo), sizeof(EXT_HT_CAP_INFO));
*(USHORT *)(&extHtCapInfo) = cpu2le16(*(USHORT *)(&extHtCapInfo));
NdisMoveMemory((PUCHAR)(&HtCapabilityTmp.ExtHtCapInfo), (PUCHAR)(&extHtCapInfo), sizeof(EXT_HT_CAP_INFO));
}
#else
*(USHORT *)(&HtCapabilityTmp.ExtHtCapInfo) = SWAP16(*(USHORT *)(&HtCapabilityTmp.ExtHtCapInfo));
#endif /* UNALIGNMENT_SUPPORT */
NdisMoveMemory(&addHTInfoTmp, &pComCfg->AddHTInfo, HtLen1);
*(USHORT *)(&addHTInfoTmp.AddHtInfo2) = SWAP16(*(USHORT *)(&addHTInfoTmp.AddHtInfo2));
*(USHORT *)(&addHTInfoTmp.AddHtInfo3) = SWAP16(*(USHORT *)(&addHTInfoTmp.AddHtInfo3));
MakeOutgoingFrame(pBeaconFrame+FrameLen, &TmpLen,
1, &HtCapIe,
1, &HtLen,
HtLen, &HtCapabilityTmp,
1, &AddHtInfoIe,
1, &HtLen1,
HtLen1, &addHTInfoTmp,
END_OF_ARGS);
#endif
FrameLen += TmpLen;
#ifdef DOT11N_DRAFT3
/*
P802.11n_D3.03, 7.3.2.60 Overlapping BSS Scan Parameters IE
*/
if ((pComCfg->Channel <= 14) &&
(pComCfg->HtCapability.HtCapInfo.ChannelWidth == 1))
{
OVERLAP_BSS_SCAN_IE OverlapScanParam;
ULONG TmpLen;
UCHAR OverlapScanIE, ScanIELen;
OverlapScanIE = IE_OVERLAPBSS_SCAN_PARM;
ScanIELen = 14;
OverlapScanParam.ScanPassiveDwell = cpu2le16(pComCfg->Dot11OBssScanPassiveDwell);
OverlapScanParam.ScanActiveDwell = cpu2le16(pComCfg->Dot11OBssScanActiveDwell);
OverlapScanParam.TriggerScanInt = cpu2le16(pComCfg->Dot11BssWidthTriggerScanInt);
OverlapScanParam.PassiveTalPerChannel = cpu2le16(pComCfg->Dot11OBssScanPassiveTotalPerChannel);
OverlapScanParam.ActiveTalPerChannel = cpu2le16(pComCfg->Dot11OBssScanActiveTotalPerChannel);
OverlapScanParam.DelayFactor = cpu2le16(pComCfg->Dot11BssWidthChanTranDelayFactor);
OverlapScanParam.ScanActThre = cpu2le16(pComCfg->Dot11OBssScanActivityThre);
MakeOutgoingFrame(pBeaconFrame + FrameLen, &TmpLen,
1, &OverlapScanIE,
1, &ScanIELen,
ScanIELen, &OverlapScanParam,
END_OF_ARGS);
FrameLen += TmpLen;
}
#endif /* DOT11N_DRAFT3 */
#ifdef DOT11_VHT_AC
if (WMODE_CAP_AC(PhyMode) && (pComCfg->Channel > 14))
{
int _len = build_vht_ies(pAd, (UCHAR *)(pBeaconFrame+FrameLen), SUBTYPE_BEACON);
FrameLen += _len;
}
#endif /* DOT11_VHT_AC */
}
#endif /* DOT11_N_SUPPORT */
#if defined(DOT11N_DRAFT3) || defined(DOT11V_WNM_SUPPORT)
/* 7.3.2.27 Extended Capabilities IE */
{
ULONG TmpLen, infoPos;
PUCHAR pInfo;
UCHAR extInfoLen;
BOOLEAN bNeedAppendExtIE = FALSE;
EXT_CAP_INFO_ELEMENT extCapInfo;
extInfoLen = sizeof(EXT_CAP_INFO_ELEMENT);
NdisZeroMemory(&extCapInfo, extInfoLen);
#ifdef DOT11_N_SUPPORT
#ifdef DOT11N_DRAFT3
/* P802.11n_D1.10, HT Information Exchange Support */
if (WMODE_CAP_N(PhyMode) && (pComCfg->Channel <= 14) &&
(pMbss->DesiredHtPhyInfo.bHtEnable) &&
(pComCfg->bBssCoexEnable == TRUE)
)
{
extCapInfo.BssCoexistMgmtSupport = 1;
}
#endif /* DOT11N_DRAFT3 */
#endif /* DOT11_N_SUPPORT */
pInfo = (PUCHAR)(&extCapInfo);
for (infoPos = 0; infoPos < extInfoLen; infoPos++)
{
if (pInfo[infoPos] != 0)
{
bNeedAppendExtIE = TRUE;
break;
}
}
if (bNeedAppendExtIE == TRUE)
{
MakeOutgoingFrame(pBeaconFrame+FrameLen, &TmpLen,
1, &ExtCapIe,
1, &extInfoLen,
extInfoLen, &extCapInfo,
END_OF_ARGS);
FrameLen += TmpLen;
}
}
#endif /* defined(DOT11N_DRAFT3) || defined(DOT11V_WNM_SUPPORT) */
if ((pMbss->AuthMode == Ndis802_11AuthModeWPA) ||
(pMbss->AuthMode == Ndis802_11AuthModeWPAPSK))
RSNIe = IE_WPA;
else if ((pMbss->AuthMode == Ndis802_11AuthModeWPA2) ||
(pMbss->AuthMode == Ndis802_11AuthModeWPA2PSK))
RSNIe = IE_WPA2;
#ifdef WAPI_SUPPORT
else if ((pMbss->AuthMode == Ndis802_11AuthModeWAICERT) ||
(pMbss->AuthMode == Ndis802_11AuthModeWAIPSK))
RSNIe = IE_WAPI;
#endif /* WAPI_SUPPORT */
/* Append RSN_IE when WPA OR WPAPSK, */
if ((pMbss->AuthMode == Ndis802_11AuthModeWPA1WPA2) ||
(pMbss->AuthMode == Ndis802_11AuthModeWPA1PSKWPA2PSK))
{
ULONG TmpLen;
MakeOutgoingFrame(pBeaconFrame+FrameLen, &TmpLen,
1, &RSNIe,
1, &pMbss->RSNIE_Len[0],
pMbss->RSNIE_Len[0], pMbss->RSN_IE[0],
1, &RSNIe2,
1, &pMbss->RSNIE_Len[1],
pMbss->RSNIE_Len[1], pMbss->RSN_IE[1],
END_OF_ARGS);
FrameLen += TmpLen;
}
else if (pMbss->AuthMode >= Ndis802_11AuthModeWPA)
{
ULONG TmpLen;
MakeOutgoingFrame(pBeaconFrame+FrameLen, &TmpLen,
1, &RSNIe,
1, &pMbss->RSNIE_Len[0],
pMbss->RSNIE_Len[0], pMbss->RSN_IE[0],
END_OF_ARGS);
FrameLen += TmpLen;
}
/* add WMM IE here */
if (pMbss->bWmmCapable)
{
ULONG TmpLen;
UCHAR i;
UCHAR WmeParmIe[26] = {IE_VENDOR_SPECIFIC, 24, 0x00, 0x50, 0xf2, 0x02, 0x01, 0x01, 0, 0};
UINT8 AIFSN[4];
WmeParmIe[8] = pAd->ApCfg.BssEdcaParm.EdcaUpdateCount & 0x0f;
#ifdef UAPSD_SUPPORT
UAPSD_MR_IE_FILL(WmeParmIe[8], &pMbss->UapsdInfo);
#endif /* UAPSD_SUPPORT */
NdisMoveMemory(AIFSN, pAd->ApCfg.BssEdcaParm.Aifsn, sizeof(AIFSN));
for (i=QID_AC_BE; i<=QID_AC_VO; i++)
{
WmeParmIe[10+ (i*4)] = (i << 5) + /* b5-6 is ACI */
((UCHAR)pAd->ApCfg.BssEdcaParm.bACM[i] << 4) + /* b4 is ACM */
(AIFSN[i] & 0x0f); /* b0-3 is AIFSN */
WmeParmIe[11+ (i*4)] = (pAd->ApCfg.BssEdcaParm.Cwmax[i] << 4) + /* b5-8 is CWMAX */
(pAd->ApCfg.BssEdcaParm.Cwmin[i] & 0x0f); /* b0-3 is CWMIN */
WmeParmIe[12+ (i*4)] = (UCHAR)(pAd->ApCfg.BssEdcaParm.Txop[i] & 0xff); /* low byte of TXOP */
WmeParmIe[13+ (i*4)] = (UCHAR)(pAd->ApCfg.BssEdcaParm.Txop[i] >> 8); /* high byte of TXOP */
}
MakeOutgoingFrame(pBeaconFrame+FrameLen, &TmpLen,
26, WmeParmIe,
END_OF_ARGS);
FrameLen += TmpLen;
}
#ifdef AP_QLOAD_SUPPORT
if (pAd->FlgQloadEnable != 0)
{
FrameLen += QBSS_LoadElementAppend(pAd, pBeaconFrame+FrameLen);
}
#endif /* AP_QLOAD_SUPPORT */
#ifdef A_BAND_SUPPORT
/*
Only 802.11a APs that comply with 802.11h are required to include a
Power Constrint Element(IE=32) in beacons and probe response frames
*/
if (((pComCfg->Channel > 14) && pComCfg->bIEEE80211H == TRUE)
)
{
ULONG TmpLen;
UINT8 PwrConstraintIE = IE_POWER_CONSTRAINT;
UINT8 PwrConstraintLen = 1;
UINT8 PwrConstraint = pComCfg->PwrConstraint;
/* prepare power constraint IE */
MakeOutgoingFrame(pBeaconFrame+FrameLen, &TmpLen,
1, &PwrConstraintIE,
1, &PwrConstraintLen,
1, &PwrConstraint,
END_OF_ARGS);
FrameLen += TmpLen;
}
#endif /* A_BAND_SUPPORT */
#ifdef DOT11_N_SUPPORT
if (WMODE_CAP_N(PhyMode) &&
(pMbss->DesiredHtPhyInfo.bHtEnable))
{
ULONG TmpLen;
UCHAR HtLen, HtLen1;
/*UCHAR i; */
#ifdef RT_BIG_ENDIAN
HT_CAPABILITY_IE HtCapabilityTmp;
ADD_HT_INFO_IE addHTInfoTmp;
/* USHORT b2lTmp, b2lTmp2;*/ /* no use */
#endif
/* add HT Capability IE */
HtLen = sizeof(pComCfg->HtCapability);
HtLen1 = sizeof(pComCfg->AddHTInfo);
if (pAd->bBroadComHT == TRUE)
{
UCHAR epigram_ie_len;
UCHAR BROADCOM_HTC[4] = {0x0, 0x90, 0x4c, 0x33};
UCHAR BROADCOM_AHTINFO[4] = {0x0, 0x90, 0x4c, 0x34};
epigram_ie_len = HtLen + 4;
#ifndef RT_BIG_ENDIAN
MakeOutgoingFrame(pBeaconFrame + FrameLen, &TmpLen,
1, &WpaIe,
1, &epigram_ie_len,
4, &BROADCOM_HTC[0],
HtLen, &pComCfg->HtCapability,
END_OF_ARGS);
#else
NdisMoveMemory(&HtCapabilityTmp, &pComCfg->HtCapability, HtLen);
*(USHORT *)(&HtCapabilityTmp.HtCapInfo) = SWAP16(*(USHORT *)(&HtCapabilityTmp.HtCapInfo));
#ifdef UNALIGNMENT_SUPPORT
{
EXT_HT_CAP_INFO extHtCapInfo;
NdisMoveMemory((PUCHAR)(&extHtCapInfo), (PUCHAR)(&HtCapabilityTmp.ExtHtCapInfo), sizeof(EXT_HT_CAP_INFO));
*(USHORT *)(&extHtCapInfo) = cpu2le16(*(USHORT *)(&extHtCapInfo));
NdisMoveMemory((PUCHAR)(&HtCapabilityTmp.ExtHtCapInfo), (PUCHAR)(&extHtCapInfo), sizeof(EXT_HT_CAP_INFO));
}
#else
*(USHORT *)(&HtCapabilityTmp.ExtHtCapInfo) = SWAP16(*(USHORT *)(&HtCapabilityTmp.ExtHtCapInfo));
#endif /* UNALIGNMENT_SUPPORT */
MakeOutgoingFrame(pBeaconFrame + FrameLen, &TmpLen,
1, &WpaIe,
1, &epigram_ie_len,
4, &BROADCOM_HTC[0],
HtLen, &HtCapabilityTmp,
END_OF_ARGS);
#endif
FrameLen += TmpLen;
epigram_ie_len = HtLen1 + 4;
#ifndef RT_BIG_ENDIAN
MakeOutgoingFrame(pBeaconFrame + FrameLen, &TmpLen,
1, &WpaIe,
1, &epigram_ie_len,
4, &BROADCOM_AHTINFO[0],
HtLen1, &pComCfg->AddHTInfo,
END_OF_ARGS);
#else
NdisMoveMemory(&addHTInfoTmp, &pComCfg->AddHTInfo, HtLen1);
*(USHORT *)(&addHTInfoTmp.AddHtInfo2) = SWAP16(*(USHORT *)(&addHTInfoTmp.AddHtInfo2));
*(USHORT *)(&addHTInfoTmp.AddHtInfo3) = SWAP16(*(USHORT *)(&addHTInfoTmp.AddHtInfo3));
MakeOutgoingFrame(pBeaconFrame + FrameLen, &TmpLen,
1, &WpaIe,
1, &epigram_ie_len,
4, &BROADCOM_AHTINFO[0],
HtLen1, &addHTInfoTmp,
END_OF_ARGS);
#endif
FrameLen += TmpLen;
}
}
#endif /* DOT11_N_SUPPORT */
/* add Ralink-specific IE here - Byte0.b0=1 for aggregation, Byte0.b1=1 for piggy-back */
{
ULONG TmpLen;
UCHAR RalinkSpecificIe[9] = {IE_VENDOR_SPECIFIC, 7, 0x00, 0x0c, 0x43, 0x00, 0x00, 0x00, 0x00};
if (pComCfg->bAggregationCapable)
RalinkSpecificIe[5] |= 0x1;
if (pComCfg->bPiggyBackCapable)
RalinkSpecificIe[5] |= 0x2;
#ifdef DOT11_N_SUPPORT
if (pComCfg->bRdg)
RalinkSpecificIe[5] |= 0x4;
#endif /* DOT11_N_SUPPORT */
MakeOutgoingFrame(pBeaconFrame+FrameLen, &TmpLen,
9, RalinkSpecificIe,
END_OF_ARGS);
FrameLen += TmpLen;
}
/* step 6. Since FrameLen may change, update TXWI. */
#ifdef A_BAND_SUPPORT
if (pAd->CommonCfg.Channel > 14) {
BeaconTransmit.field.MODE = MODE_OFDM;
BeaconTransmit.field.MCS = MCS_RATE_6;
}
#endif /* A_BAND_SUPPORT */
RTMPWriteTxWI(pAd, &pAd->BeaconTxWI, FALSE, FALSE, TRUE, FALSE, FALSE, TRUE, 0, 0xff,
FrameLen, PID_MGMT, QID_MGMT, 0, IFS_HTTXOP, FALSE, &BeaconTransmit);
/* step 7. move BEACON TXWI and frame content to on-chip memory */
RT28xx_UpdateBeaconToAsic(pAd, apidx, FrameLen, UpdatePos);
}
/*
==========================================================================
Description:
Pre-build a BEACON frame in the shared memory
==========================================================================
*/
VOID APMakeBssBeacon(RTMP_ADAPTER *pAd, INT apidx)
{
UCHAR DsLen = 1, SsidLen;
HEADER_802_11 BcnHdr;
LARGE_INTEGER FakeTimestamp;
ULONG FrameLen = 0;
PUCHAR pBeaconFrame = (PUCHAR)pAd->ApCfg.MBSSID[apidx].BeaconBuf;
UCHAR *ptr;
UINT i;
UINT32 longValue, reg_base;
HTTRANSMIT_SETTING BeaconTransmit = {.word = 0}; /* MGMT frame PHY rate setting when operatin at Ht rate. */
UCHAR PhyMode, SupRateLen;
UINT8 TXWISize = pAd->chipCap.TXWISize;
MULTISSID_STRUCT *pMbss = &pAd->ApCfg.MBSSID[apidx];
#ifdef SPECIFIC_TX_POWER_SUPPORT
UCHAR TxPwrAdj = 0;
#endif /* SPECIFIC_TX_POWER_SUPPORT */
if(!BeaconTransmitRequired(pAd, apidx, pMbss))
return;
PhyMode = pMbss->wdev.PhyMode;
if (pMbss->bHideSsid)
SsidLen = 0;
else
SsidLen = pMbss->SsidLen;
MgtMacHeaderInit(pAd, &BcnHdr, SUBTYPE_BEACON, 0, BROADCAST_ADDR,
pMbss->wdev.if_addr,
pMbss->wdev.bssid);
/* for update framelen to TxWI later. */
SupRateLen = pAd->CommonCfg.SupRateLen;
if (PhyMode == WMODE_B)
SupRateLen = 4;
MakeOutgoingFrame(pBeaconFrame, &FrameLen,
sizeof(HEADER_802_11), &BcnHdr,
TIMESTAMP_LEN, &FakeTimestamp,
2, &pAd->CommonCfg.BeaconPeriod,
2, &pMbss->CapabilityInfo,
1, &SsidIe,
1, &SsidLen,
SsidLen, pMbss->Ssid,
1, &SupRateIe,
1, &SupRateLen,
SupRateLen, pAd->CommonCfg.SupRate,
1, &DsIe,
1, &DsLen,
1, &pAd->CommonCfg.Channel,
END_OF_ARGS);
if ((pAd->CommonCfg.ExtRateLen) && (PhyMode != WMODE_B))
{
ULONG TmpLen;
MakeOutgoingFrame(pBeaconFrame+FrameLen, &TmpLen,
1, &ExtRateIe,
1, &pAd->CommonCfg.ExtRateLen,
pAd->CommonCfg.ExtRateLen, pAd->CommonCfg.ExtRate,
END_OF_ARGS);
FrameLen += TmpLen;
}
/* add country IE, power constraint IE */
if (pAd->CommonCfg.bCountryFlag)
{
ULONG TmpLen, TmpLen2=0;
UCHAR *TmpFrame = NULL;
UCHAR CountryIe = IE_COUNTRY;
os_alloc_mem(NULL, (UCHAR **)&TmpFrame, 256);
if (TmpFrame != NULL)
{
NdisZeroMemory(TmpFrame, 256);
/* prepare channel information */
#ifdef EXT_BUILD_CHANNEL_LIST
BuildBeaconChList(pAd, TmpFrame, &TmpLen2);
#else
{
UCHAR MaxTxPower = GetCuntryMaxTxPwr(pAd, pAd->CommonCfg.Channel);
MakeOutgoingFrame(TmpFrame+TmpLen2, &TmpLen,
1, &pAd->ChannelList[0].Channel,
1, &pAd->ChannelListNum,
1, &MaxTxPower,
END_OF_ARGS);
TmpLen2 += TmpLen;
}
#endif /* EXT_BUILD_CHANNEL_LIST */
/* need to do the padding bit check, and concatenate it */
if ((TmpLen2%2) == 0)
{
UCHAR TmpLen3 = TmpLen2+4;
MakeOutgoingFrame(pBeaconFrame+FrameLen,&TmpLen,
1, &CountryIe,
1, &TmpLen3,
3, pAd->CommonCfg.CountryCode,
TmpLen2+1, TmpFrame,
END_OF_ARGS);
}
else
{
UCHAR TmpLen3 = TmpLen2+3;
MakeOutgoingFrame(pBeaconFrame+FrameLen,&TmpLen,
1, &CountryIe,
1, &TmpLen3,
3, pAd->CommonCfg.CountryCode,
TmpLen2, TmpFrame,
END_OF_ARGS);
}
FrameLen += TmpLen;
os_free_mem(NULL, TmpFrame);
}
else
DBGPRINT(RT_DEBUG_ERROR, ("%s: Allocate memory fail!!!\n", __FUNCTION__));
}
#ifdef DOT11_N_SUPPORT
/* AP Channel Report */
{
UCHAR APChannelReportIe = IE_AP_CHANNEL_REPORT;
ULONG TmpLen;
/*
802.11n D2.0 Annex J, USA regulatory
class 32, channel set 1~7
class 33, channel set 5-11
*/
UCHAR rclass32[]={32, 1, 2, 3, 4, 5, 6, 7};
UCHAR rclass33[]={33, 5, 6, 7, 8, 9, 10, 11};
UCHAR rclasslen = 8; /*sizeof(rclass32); */
if (PhyMode == (WMODE_B | WMODE_G | WMODE_GN))
{
MakeOutgoingFrame(pBeaconFrame+FrameLen,&TmpLen,
1, &APChannelReportIe,
1, &rclasslen,
rclasslen, rclass32,
1, &APChannelReportIe,
1, &rclasslen,
rclasslen, rclass33,
END_OF_ARGS);
FrameLen += TmpLen;
}
}
#endif /* DOT11_N_SUPPORT */
BeaconTransmit.word = 0;
#ifdef SPECIFIC_TX_POWER_SUPPORT
/* Specific Power for Long-Range Beacon */
if ((pAd->ApCfg.MBSSID[apidx].TxPwrAdj != -1) /* &&
(BeaconTransmit.field.MODE == MODE_CCK)*/)
{
TxPwrAdj = pAd->ApCfg.MBSSID[apidx].TxPwrAdj;
}
#endif /* SPECIFIC_TX_POWER_SUPPORT */
RTMPWriteTxWI(pAd, &pAd->BeaconTxWI, FALSE, FALSE, TRUE, FALSE, FALSE, TRUE, 0, BSS0Mcast_WCID,
FrameLen, PID_MGMT, 0, 0,IFS_HTTXOP, &BeaconTransmit);
#ifdef SPECIFIC_TX_POWER_SUPPORT
#ifdef RTMP_MAC
if ((IS_RT6352(pAd) || IS_MT76x2(pAd)) && (pAd->chipCap.hif_type == HIF_RTMP))
pAd->BeaconTxWI.TXWI_O.TxPwrAdj = TxPwrAdj;
#endif /* RTMP_MAC */
#ifdef RLT_MAC
if ((IS_RT6352(pAd) || IS_MT76x2(pAd)) && (pAd->chipCap.hif_type == HIF_RLT))
pAd->BeaconTxWI.TXWI_N.TxPwrAdj = TxPwrAdj;
#endif /* RLT_MAC */
#endif /* SPECIFIC_TX_POWER_SUPPORT */
/*
step 6. move BEACON TXD and frame content to on-chip memory
*/
ptr = (PUCHAR)&pAd->BeaconTxWI;
#ifdef RT_BIG_ENDIAN
RTMPWIEndianChange(pAd, ptr, TYPE_TXWI);
#endif
reg_base = pAd->BeaconOffset[pMbss->BcnBufIdx];
for (i=0; i < TXWISize; i+=4)
{
longValue = *ptr + (*(ptr+1)<<8) + (*(ptr+2)<<16) + (*(ptr+3)<<24);
RTMP_CHIP_UPDATE_BEACON(pAd, reg_base + i, longValue, 4);
ptr += 4;
}
/* update BEACON frame content. start right after the TXWI field. */
ptr = (PUCHAR)pMbss->BeaconBuf;
#ifdef RT_BIG_ENDIAN
RTMPFrameEndianChange(pAd, ptr, DIR_WRITE, FALSE);
#endif
reg_base = pAd->BeaconOffset[pMbss->BcnBufIdx] + TXWISize;
for (i= 0; i< FrameLen; i+=4)
{
longValue = *ptr + (*(ptr+1)<<8) + (*(ptr+2)<<16) + (*(ptr+3)<<24);
RTMP_CHIP_UPDATE_BEACON(pAd, reg_base + i, longValue, 4);
ptr += 4;
}
pMbss->TimIELocationInBeacon = (UCHAR)FrameLen;
pMbss->CapabilityInfoLocationInBeacon = sizeof(HEADER_802_11) + TIMESTAMP_LEN + 2;
}
/*
==========================================================================
Description:
Update the BEACON frame in the shared memory. Because TIM IE is variable
length. other IEs after TIM has to shift and total frame length may change
for each BEACON period.
Output:
pAd->ApCfg.MBSSID[apidx].CapabilityInfo
pAd->ApCfg.ErpIeContent
==========================================================================
*/
VOID APUpdateBeaconFrame(RTMP_ADAPTER *pAd, INT apidx)
{
UCHAR *pBeaconFrame;
UCHAR *ptr;
ULONG FrameLen;
ULONG UpdatePos;
UCHAR RSNIe=IE_WPA, RSNIe2=IE_WPA2;
UCHAR ID_1B, TimFirst, TimLast, *pTim;
MULTISSID_STRUCT *pMbss;
COMMON_CONFIG *pComCfg;
UCHAR PhyMode;
BOOLEAN bHasWpsIE = FALSE;
UINT i;
HTTRANSMIT_SETTING BeaconTransmit = {.word = 0}; /* MGMT frame PHY rate setting when operatin at Ht rate. */
struct wifi_dev *wdev;
#ifdef SPECIFIC_TX_POWER_SUPPORT
UCHAR TxPwrAdj = 0;
#endif /* SPECIFIC_TX_POWER_SUPPORT */
pComCfg = &pAd->CommonCfg;
pMbss = &pAd->ApCfg.MBSSID[apidx];
wdev = &pMbss->wdev;
pBeaconFrame = (UCHAR *)&pMbss->BeaconBuf[0];
FrameLen = UpdatePos = pMbss->TimIELocationInBeacon;
PhyMode = wdev->PhyMode;
if(!BeaconTransmitRequired(pAd, apidx, pMbss))
return;
/*
step 1 - update BEACON's Capability
*/
ptr = pBeaconFrame + pMbss->CapabilityInfoLocationInBeacon;
*ptr = (UCHAR)(pMbss->CapabilityInfo & 0x00ff);
*(ptr+1) = (UCHAR)((pMbss->CapabilityInfo & 0xff00) >> 8);
/*
step 2 - update TIM IE
TODO: enlarge TIM bitmap to support up to 64 STAs
TODO: re-measure if RT2600 TBTT interrupt happens faster than BEACON sent out time
*/
ptr = pBeaconFrame + pMbss->TimIELocationInBeacon;
*ptr = IE_TIM;
*(ptr + 2) = pAd->ApCfg.DtimCount;
*(ptr + 3) = pAd->ApCfg.DtimPeriod;
/* find the smallest AID (PS mode) */
TimFirst = 0; /* record first TIM byte != 0x00 */
TimLast = 0; /* record last TIM byte != 0x00 */
pTim = pMbss->TimBitmaps;
for(ID_1B=0; ID_1B<WLAN_MAX_NUM_OF_TIM; ID_1B++)
{
/* get the TIM indicating PS packets for 8 stations */
UCHAR tim_1B = pTim[ID_1B];
if (ID_1B == 0)
tim_1B &= 0xfe; /* skip bit0 bc/mc */
if (tim_1B == 0)
continue; /* find next 1B */
if (TimFirst == 0)
TimFirst = ID_1B;
TimLast = ID_1B;
}
/* fill TIM content to beacon buffer */
if (TimFirst & 0x01)
TimFirst --; /* find the even offset byte */
*(ptr + 1) = 3+(TimLast-TimFirst+1); /* TIM IE length */
*(ptr + 4) = TimFirst;
for(i=TimFirst; i<=TimLast; i++)
*(ptr + 5 + i - TimFirst) = pTim[i];
/* bit0 means backlogged mcast/bcast */
if (pAd->ApCfg.DtimCount == 0)
*(ptr + 4) |= (pMbss->TimBitmaps[WLAN_CT_TIM_BCMC_OFFSET] & 0x01);
/* adjust BEACON length according to the new TIM */
FrameLen += (2 + *(ptr+1));
/* move RSN IE from below to here for Ralink Win7 v3.0.0.61 version parse beacon issue. */
/* sync the order with BRCM's AP. */
if ((wdev->AuthMode == Ndis802_11AuthModeWPA) ||
(wdev->AuthMode == Ndis802_11AuthModeWPAPSK))
RSNIe = IE_WPA;
else if ((wdev->AuthMode == Ndis802_11AuthModeWPA2) ||
(wdev->AuthMode == Ndis802_11AuthModeWPA2PSK))
RSNIe = IE_WPA2;
/* Append RSN_IE when WPA OR WPAPSK, */
if ((wdev->AuthMode == Ndis802_11AuthModeWPA1WPA2) ||
(wdev->AuthMode == Ndis802_11AuthModeWPA1PSKWPA2PSK))
{
ULONG TmpLen;
MakeOutgoingFrame(pBeaconFrame+FrameLen, &TmpLen,
1, &RSNIe,
1, &pMbss->RSNIE_Len[0],
pMbss->RSNIE_Len[0], pMbss->RSN_IE[0],
1, &RSNIe2,
1, &pMbss->RSNIE_Len[1],
pMbss->RSNIE_Len[1], pMbss->RSN_IE[1],
END_OF_ARGS);
FrameLen += TmpLen;
}
else if (wdev->AuthMode >= Ndis802_11AuthModeWPA)
{
ULONG TmpLen;
MakeOutgoingFrame(pBeaconFrame+FrameLen, &TmpLen,
1, &RSNIe,
1, &pMbss->RSNIE_Len[0],
pMbss->RSNIE_Len[0], pMbss->RSN_IE[0],
END_OF_ARGS);
FrameLen += TmpLen;
}
#ifdef HOSTAPD_SUPPORT
if (pMbss->HostapdWPS && (pMbss->WscIEBeacon.ValueLen))
bHasWpsIE = TRUE;
#endif
if (bHasWpsIE)
{
ULONG WscTmpLen = 0;
MakeOutgoingFrame(pBeaconFrame+FrameLen, &WscTmpLen,
pMbss->WscIEBeacon.ValueLen, pMbss->WscIEBeacon.Value,
END_OF_ARGS);
FrameLen += WscTmpLen;
}
/* Update ERP */
if ((pComCfg->ExtRateLen) && (PhyMode != WMODE_B))
{
/* fill ERP IE */
ptr = (UCHAR *)pBeaconFrame + FrameLen; /* pTxD->DataByteCnt; */
*ptr = IE_ERP;
*(ptr + 1) = 1;
*(ptr + 2) = pAd->ApCfg.ErpIeContent;
FrameLen += 3;
}
#ifdef A_BAND_SUPPORT
/* fill up Channel Switch Announcement Element */
if ((pComCfg->Channel > 14)
&& (pComCfg->bIEEE80211H == 1)
&& (pAd->Dot11_H.RDMode == RD_SWITCHING_MODE))
{
ptr = pBeaconFrame + FrameLen;
*ptr = IE_CHANNEL_SWITCH_ANNOUNCEMENT;
*(ptr + 1) = 3;
*(ptr + 2) = 1;
*(ptr + 3) = pComCfg->Channel;
*(ptr + 4) = (pAd->Dot11_H.CSPeriod - pAd->Dot11_H.CSCount - 1);
ptr += 5;
FrameLen += 5;
#ifdef DOT11_N_SUPPORT
/* Extended Channel Switch Announcement Element */
if (pComCfg->bExtChannelSwitchAnnouncement)
{
HT_EXT_CHANNEL_SWITCH_ANNOUNCEMENT_IE HtExtChannelSwitchIe;
build_ext_channel_switch_ie(pAd, &HtExtChannelSwitchIe);
NdisMoveMemory(ptr, &HtExtChannelSwitchIe, sizeof(HT_EXT_CHANNEL_SWITCH_ANNOUNCEMENT_IE));
ptr += sizeof(HT_EXT_CHANNEL_SWITCH_ANNOUNCEMENT_IE);
FrameLen += sizeof(HT_EXT_CHANNEL_SWITCH_ANNOUNCEMENT_IE);
}
#ifdef DOT11_VHT_AC
if (WMODE_CAP_AC(PhyMode)) {
INT tp_len, wb_len = 0;
UCHAR *ch_sw_wrapper;
VHT_TXPWR_ENV_IE txpwr_env;
*ptr = IE_CH_SWITCH_WRAPPER;
ch_sw_wrapper = (UCHAR *)(ptr + 1); // reserve for length
ptr += 2; // skip len
if (pComCfg->RegTransmitSetting.field.BW == BW_40) {
WIDE_BW_CH_SWITCH_ELEMENT wb_info;
*ptr = IE_WIDE_BW_CH_SWITCH;
*(ptr + 1) = sizeof(WIDE_BW_CH_SWITCH_ELEMENT);
ptr += 2;
NdisZeroMemory(&wb_info, sizeof(WIDE_BW_CH_SWITCH_ELEMENT));
if (pComCfg->vht_bw == VHT_BW_2040)
wb_info.new_ch_width = 0;
else
wb_info.new_ch_width = 1;
if (pComCfg->vht_bw == VHT_BW_80) {
wb_info.center_freq_1 = vht_cent_ch_freq(pAd, pComCfg->Channel);
wb_info.center_freq_2 = 0;
}
NdisMoveMemory(ptr, &wb_info, sizeof(WIDE_BW_CH_SWITCH_ELEMENT));
wb_len = sizeof(WIDE_BW_CH_SWITCH_ELEMENT);
ptr += wb_len;
wb_len += 2;
}
*ptr = IE_VHT_TXPWR_ENV;
NdisZeroMemory(&txpwr_env, sizeof(VHT_TXPWR_ENV_IE));
tp_len = build_vht_txpwr_envelope(pAd, (UCHAR *)&txpwr_env);
*(ptr + 1) = tp_len;
ptr += 2;
NdisMoveMemory(ptr, &txpwr_env, tp_len);
ptr += tp_len;
tp_len += 2;
*ch_sw_wrapper = wb_len + tp_len;
FrameLen += (2 + wb_len + tp_len);
}
#endif /* DOT11_VHT_AC */
#endif /* DOT11_N_SUPPORT */
}
#endif /* A_BAND_SUPPORT */
#ifdef DOT11_N_SUPPORT
/* step 5. Update HT. Since some fields might change in the same BSS. */
if (WMODE_CAP_N(PhyMode) && (wdev->DesiredHtPhyInfo.bHtEnable))
{
ULONG TmpLen;
UCHAR HtLen, HtLen1;
/*UCHAR i; */
#ifdef RT_BIG_ENDIAN
HT_CAPABILITY_IE HtCapabilityTmp;
ADD_HT_INFO_IE addHTInfoTmp;
/* USHORT b2lTmp, b2lTmp2; // no use */
#endif
/* add HT Capability IE */
HtLen = sizeof(pComCfg->HtCapability);
HtLen1 = sizeof(pComCfg->AddHTInfo);
#ifndef RT_BIG_ENDIAN
MakeOutgoingFrame(pBeaconFrame+FrameLen, &TmpLen,
1, &HtCapIe,
1, &HtLen,
HtLen, &pComCfg->HtCapability,
1, &AddHtInfoIe,
1, &HtLen1,
HtLen1, &pComCfg->AddHTInfo,
END_OF_ARGS);
#else
NdisMoveMemory(&HtCapabilityTmp, &pComCfg->HtCapability, HtLen);
*(USHORT *)(&HtCapabilityTmp.HtCapInfo) = SWAP16(*(USHORT *)(&HtCapabilityTmp.HtCapInfo));
#ifdef UNALIGNMENT_SUPPORT
{
EXT_HT_CAP_INFO extHtCapInfo;
NdisMoveMemory((PUCHAR)(&extHtCapInfo), (PUCHAR)(&HtCapabilityTmp.ExtHtCapInfo), sizeof(EXT_HT_CAP_INFO));
*(USHORT *)(&extHtCapInfo) = cpu2le16(*(USHORT *)(&extHtCapInfo));
NdisMoveMemory((PUCHAR)(&HtCapabilityTmp.ExtHtCapInfo), (PUCHAR)(&extHtCapInfo), sizeof(EXT_HT_CAP_INFO));
}
#else
*(USHORT *)(&HtCapabilityTmp.ExtHtCapInfo) = SWAP16(*(USHORT *)(&HtCapabilityTmp.ExtHtCapInfo));
#endif /* UNALIGNMENT_SUPPORT */
NdisMoveMemory(&addHTInfoTmp, &pComCfg->AddHTInfo, HtLen1);
*(USHORT *)(&addHTInfoTmp.AddHtInfo2) = SWAP16(*(USHORT *)(&addHTInfoTmp.AddHtInfo2));
*(USHORT *)(&addHTInfoTmp.AddHtInfo3) = SWAP16(*(USHORT *)(&addHTInfoTmp.AddHtInfo3));
MakeOutgoingFrame(pBeaconFrame+FrameLen, &TmpLen,
1, &HtCapIe,
1, &HtLen,
HtLen, &HtCapabilityTmp,
1, &AddHtInfoIe,
1, &HtLen1,
HtLen1, &addHTInfoTmp,
END_OF_ARGS);
#endif
FrameLen += TmpLen;
#ifdef DOT11N_DRAFT3
/*
P802.11n_D3.03, 7.3.2.60 Overlapping BSS Scan Parameters IE
*/
if ((pComCfg->Channel <= 14) &&
(pComCfg->HtCapability.HtCapInfo.ChannelWidth == 1))
{
OVERLAP_BSS_SCAN_IE OverlapScanParam;
ULONG TmpLen;
UCHAR OverlapScanIE, ScanIELen;
OverlapScanIE = IE_OVERLAPBSS_SCAN_PARM;
ScanIELen = 14;
OverlapScanParam.ScanPassiveDwell = cpu2le16(pComCfg->Dot11OBssScanPassiveDwell);
OverlapScanParam.ScanActiveDwell = cpu2le16(pComCfg->Dot11OBssScanActiveDwell);
OverlapScanParam.TriggerScanInt = cpu2le16(pComCfg->Dot11BssWidthTriggerScanInt);
OverlapScanParam.PassiveTalPerChannel = cpu2le16(pComCfg->Dot11OBssScanPassiveTotalPerChannel);
OverlapScanParam.ActiveTalPerChannel = cpu2le16(pComCfg->Dot11OBssScanActiveTotalPerChannel);
OverlapScanParam.DelayFactor = cpu2le16(pComCfg->Dot11BssWidthChanTranDelayFactor);
OverlapScanParam.ScanActThre = cpu2le16(pComCfg->Dot11OBssScanActivityThre);
MakeOutgoingFrame(pBeaconFrame + FrameLen, &TmpLen,
1, &OverlapScanIE,
1, &ScanIELen,
ScanIELen, &OverlapScanParam,
END_OF_ARGS);
FrameLen += TmpLen;
}
#endif /* DOT11N_DRAFT3 */
#ifdef DOT11_VHT_AC
if (WMODE_CAP_AC(PhyMode) && (pComCfg->Channel > 14))
{
int _len = build_vht_ies(pAd, (UCHAR *)(pBeaconFrame+FrameLen), SUBTYPE_BEACON);
FrameLen += _len;
}
#endif /* DOT11_VHT_AC */
}
#endif /* DOT11_N_SUPPORT */
/* 7.3.2.27 Extended Capabilities IE */
{
ULONG TmpLen, infoPos;
PUCHAR pInfo;
UCHAR extInfoLen;
BOOLEAN bNeedAppendExtIE = FALSE;
EXT_CAP_INFO_ELEMENT extCapInfo;
extInfoLen = sizeof(EXT_CAP_INFO_ELEMENT);
NdisZeroMemory(&extCapInfo, extInfoLen);
#ifdef DOT11_N_SUPPORT
#ifdef DOT11N_DRAFT3
/* P802.11n_D1.10, HT Information Exchange Support */
if (WMODE_CAP_N(PhyMode) && (pComCfg->Channel <= 14) &&
(pMbss->wdev.DesiredHtPhyInfo.bHtEnable) &&
(pComCfg->bBssCoexEnable == TRUE)
)
{
extCapInfo.BssCoexistMgmtSupport = 1;
}
#endif /* DOT11N_DRAFT3 */
#endif /* DOT11_N_SUPPORT */
#ifdef DOT11_VHT_AC
if (WMODE_CAP_AC(PhyMode) &&
(pAd->CommonCfg.Channel > 14))
extCapInfo.operating_mode_notification = 1;
#endif /* DOT11_VHT_AC */
pInfo = (PUCHAR)(&extCapInfo);
for (infoPos = 0; infoPos < extInfoLen; infoPos++)
{
if (pInfo[infoPos] != 0)
{
bNeedAppendExtIE = TRUE;
break;
}
}
if (bNeedAppendExtIE == TRUE)
{
MakeOutgoingFrame(pBeaconFrame+FrameLen, &TmpLen,
1, &ExtCapIe,
1, &extInfoLen,
extInfoLen, &extCapInfo,
END_OF_ARGS);
FrameLen += TmpLen;
}
}
#ifdef WFA_VHT_PF
if (pAd->force_vht_op_mode == TRUE)
{
ULONG TmpLen;
UCHAR operating_ie = IE_OPERATING_MODE_NOTIFY, operating_len = 1;
OPERATING_MODE operating_mode;
operating_mode.rx_nss_type = 0;
operating_mode.rx_nss = (pAd->vht_pf_op_ss - 1);
operating_mode.ch_width = pAd->vht_pf_op_bw;
MakeOutgoingFrame(pBeaconFrame+FrameLen, &TmpLen,
1, &operating_ie,
1, &operating_len,
1, &operating_mode,
END_OF_ARGS);
FrameLen += TmpLen;
}
#endif /* WFA_VHT_PF */
/* add WMM IE here */
if (pMbss->wdev.bWmmCapable)
{
ULONG TmpLen;
UCHAR i;
UCHAR WmeParmIe[26] = {IE_VENDOR_SPECIFIC, 24, 0x00, 0x50, 0xf2, 0x02, 0x01, 0x01, 0, 0};
UINT8 AIFSN[4];
WmeParmIe[8] = pAd->ApCfg.BssEdcaParm.EdcaUpdateCount & 0x0f;
#ifdef UAPSD_SUPPORT
UAPSD_MR_IE_FILL(WmeParmIe[8], &pMbss->UapsdInfo);
#endif /* UAPSD_SUPPORT */
NdisMoveMemory(AIFSN, pAd->ApCfg.BssEdcaParm.Aifsn, sizeof(AIFSN));
for (i=QID_AC_BE; i<=QID_AC_VO; i++)
{
WmeParmIe[10+ (i*4)] = (i << 5) + /* b5-6 is ACI */
((UCHAR)pAd->ApCfg.BssEdcaParm.bACM[i] << 4) + /* b4 is ACM */
(AIFSN[i] & 0x0f); /* b0-3 is AIFSN */
WmeParmIe[11+ (i*4)] = (pAd->ApCfg.BssEdcaParm.Cwmax[i] << 4) + /* b5-8 is CWMAX */
(pAd->ApCfg.BssEdcaParm.Cwmin[i] & 0x0f); /* b0-3 is CWMIN */
WmeParmIe[12+ (i*4)] = (UCHAR)(pAd->ApCfg.BssEdcaParm.Txop[i] & 0xff); /* low byte of TXOP */
WmeParmIe[13+ (i*4)] = (UCHAR)(pAd->ApCfg.BssEdcaParm.Txop[i] >> 8); /* high byte of TXOP */
}
MakeOutgoingFrame(pBeaconFrame+FrameLen, &TmpLen,
26, WmeParmIe,
END_OF_ARGS);
FrameLen += TmpLen;
}
#ifdef AP_QLOAD_SUPPORT
if (pAd->phy_ctrl.FlgQloadEnable != 0)
FrameLen += QBSS_LoadElementAppend(pAd, pBeaconFrame+FrameLen);
#endif /* AP_QLOAD_SUPPORT */
#ifdef A_BAND_SUPPORT
/*
Only 802.11a APs that comply with 802.11h are required to include a
Power Constrint Element(IE=32) in beacons and probe response frames
*/
if (((pComCfg->Channel > 14) && pComCfg->bIEEE80211H == TRUE)
)
{
ULONG TmpLen;
UINT8 PwrConstraintIE = IE_POWER_CONSTRAINT;
UINT8 PwrConstraintLen = 1;
UINT8 PwrConstraint = pComCfg->PwrConstraint;
/* prepare power constraint IE */
MakeOutgoingFrame(pBeaconFrame+FrameLen, &TmpLen,
1, &PwrConstraintIE,
1, &PwrConstraintLen,
1, &PwrConstraint,
END_OF_ARGS);
FrameLen += TmpLen;
#ifdef DOT11_VHT_AC
if (WMODE_CAP_AC(PhyMode)) {
ULONG TmpLen;
UINT8 vht_txpwr_env_ie = IE_VHT_TXPWR_ENV;
UINT8 ie_len;
VHT_TXPWR_ENV_IE txpwr_env;
ie_len = build_vht_txpwr_envelope(pAd, (UCHAR *)&txpwr_env);
MakeOutgoingFrame(pBeaconFrame+FrameLen, &TmpLen,
1, &vht_txpwr_env_ie,
1, &ie_len,
ie_len, &txpwr_env,
END_OF_ARGS);
FrameLen += TmpLen;
}
#endif /* DOT11_VHT_AC */
}
#endif /* A_BAND_SUPPORT */
#ifdef DOT11_N_SUPPORT
if (WMODE_CAP_N(PhyMode) &&
(wdev->DesiredHtPhyInfo.bHtEnable))
{
ULONG TmpLen;
UCHAR HtLen, HtLen1;
#ifdef RT_BIG_ENDIAN
HT_CAPABILITY_IE HtCapabilityTmp;
ADD_HT_INFO_IE addHTInfoTmp;
#endif
/* add HT Capability IE */
HtLen = sizeof(pComCfg->HtCapability);
HtLen1 = sizeof(pComCfg->AddHTInfo);
if (pAd->bBroadComHT == TRUE)
{
UCHAR epigram_ie_len;
UCHAR BROADCOM_HTC[4] = {0x0, 0x90, 0x4c, 0x33};
UCHAR BROADCOM_AHTINFO[4] = {0x0, 0x90, 0x4c, 0x34};
epigram_ie_len = HtLen + 4;
#ifndef RT_BIG_ENDIAN
MakeOutgoingFrame(pBeaconFrame + FrameLen, &TmpLen,
1, &WpaIe,
1, &epigram_ie_len,
4, &BROADCOM_HTC[0],
HtLen, &pComCfg->HtCapability,
END_OF_ARGS);
#else
NdisMoveMemory(&HtCapabilityTmp, &pComCfg->HtCapability, HtLen);
*(USHORT *)(&HtCapabilityTmp.HtCapInfo) = SWAP16(*(USHORT *)(&HtCapabilityTmp.HtCapInfo));
#ifdef UNALIGNMENT_SUPPORT
{
EXT_HT_CAP_INFO extHtCapInfo;
NdisMoveMemory((PUCHAR)(&extHtCapInfo), (PUCHAR)(&HtCapabilityTmp.ExtHtCapInfo), sizeof(EXT_HT_CAP_INFO));
*(USHORT *)(&extHtCapInfo) = cpu2le16(*(USHORT *)(&extHtCapInfo));
NdisMoveMemory((PUCHAR)(&HtCapabilityTmp.ExtHtCapInfo), (PUCHAR)(&extHtCapInfo), sizeof(EXT_HT_CAP_INFO));
}
#else
*(USHORT *)(&HtCapabilityTmp.ExtHtCapInfo) = SWAP16(*(USHORT *)(&HtCapabilityTmp.ExtHtCapInfo));
#endif /* UNALIGNMENT_SUPPORT */
MakeOutgoingFrame(pBeaconFrame + FrameLen, &TmpLen,
1, &WpaIe,
1, &epigram_ie_len,
4, &BROADCOM_HTC[0],
HtLen, &HtCapabilityTmp,
END_OF_ARGS);
#endif
FrameLen += TmpLen;
epigram_ie_len = HtLen1 + 4;
#ifndef RT_BIG_ENDIAN
MakeOutgoingFrame(pBeaconFrame + FrameLen, &TmpLen,
1, &WpaIe,
1, &epigram_ie_len,
4, &BROADCOM_AHTINFO[0],
HtLen1, &pComCfg->AddHTInfo,
END_OF_ARGS);
#else
NdisMoveMemory(&addHTInfoTmp, &pComCfg->AddHTInfo, HtLen1);
*(USHORT *)(&addHTInfoTmp.AddHtInfo2) = SWAP16(*(USHORT *)(&addHTInfoTmp.AddHtInfo2));
*(USHORT *)(&addHTInfoTmp.AddHtInfo3) = SWAP16(*(USHORT *)(&addHTInfoTmp.AddHtInfo3));
MakeOutgoingFrame(pBeaconFrame + FrameLen, &TmpLen,
1, &WpaIe,
1, &epigram_ie_len,
4, &BROADCOM_AHTINFO[0],
HtLen1, &addHTInfoTmp,
END_OF_ARGS);
#endif
FrameLen += TmpLen;
}
}
#endif /* DOT11_N_SUPPORT */
/* add Ralink-specific IE here - Byte0.b0=1 for aggregation, Byte0.b1=1 for piggy-back */
{
ULONG TmpLen;
UCHAR RalinkSpecificIe[9] = {IE_VENDOR_SPECIFIC, 7, 0x00, 0x0c, 0x43, 0x00, 0x00, 0x00, 0x00};
if (pComCfg->bAggregationCapable)
RalinkSpecificIe[5] |= 0x1;
if (pComCfg->bPiggyBackCapable)
RalinkSpecificIe[5] |= 0x2;
#ifdef DOT11_N_SUPPORT
if (pComCfg->bRdg)
RalinkSpecificIe[5] |= 0x4;
#endif /* DOT11_N_SUPPORT */
#ifdef DOT11_VHT_AC
if (pComCfg->b256QAM_2G && WMODE_2G_ONLY(pComCfg->PhyMode))
RalinkSpecificIe[5] |= 0x8;
#endif /* DOT11_VHT_AC */
MakeOutgoingFrame(pBeaconFrame+FrameLen, &TmpLen,
9, RalinkSpecificIe,
END_OF_ARGS);
FrameLen += TmpLen;
}
/* step 6. Since FrameLen may change, update TXWI. */
#ifdef A_BAND_SUPPORT
if (pAd->CommonCfg.Channel > 14) {
BeaconTransmit.field.MODE = MODE_OFDM;
BeaconTransmit.field.MCS = MCS_RATE_6;
}
#endif /* A_BAND_SUPPORT */
#ifdef SPECIFIC_TX_POWER_SUPPORT
/* Specific Power for Long-Range Beacon */
if ((pAd->ApCfg.MBSSID[apidx].TxPwrAdj != -1) /* &&
(BeaconTransmit.field.MODE == MODE_CCK)*/)
{
TxPwrAdj = pAd->ApCfg.MBSSID[apidx].TxPwrAdj;
}
#endif /* SPECIFIC_TX_POWER_SUPPORT */
RTMPWriteTxWI(pAd, &pAd->BeaconTxWI, FALSE, FALSE, TRUE, FALSE, FALSE, TRUE, 0, RESERVED_WCID,
FrameLen, PID_MGMT, 0 /*QID_MGMT*/, 0, IFS_HTTXOP, &BeaconTransmit);
#ifdef SPECIFIC_TX_POWER_SUPPORT
#ifdef RTMP_MAC
if ((IS_RT6352(pAd) || IS_MT76x2(pAd)) && (pAd->chipCap.hif_type == HIF_RTMP))
pAd->BeaconTxWI.TXWI_O.TxPwrAdj = TxPwrAdj;
#endif /* RTMP_MAC */
#ifdef RLT_MAC
if ((IS_RT6352(pAd) || IS_MT76x2(pAd)) && (pAd->chipCap.hif_type == HIF_RLT))
pAd->BeaconTxWI.TXWI_N.TxPwrAdj = TxPwrAdj;
#endif /* RLT_MAC */
#endif /* SPECIFIC_TX_POWER_SUPPORT */
/* step 7. move BEACON TXWI and frame content to on-chip memory */
RT28xx_UpdateBeaconToAsic(pAd, apidx, FrameLen, UpdatePos);
}
/*
==========================================================================
Description:
Pre-build a BEACON frame in the shared memory
==========================================================================
*/
VOID APMakeBssBeacon(RTMP_ADAPTER *pAd, INT apidx)
{
UCHAR DsLen = 1, SsidLen;
HEADER_802_11 BcnHdr;
LARGE_INTEGER FakeTimestamp;
ULONG FrameLen = 0;
PUCHAR pBeaconFrame = (PUCHAR)pAd->ApCfg.MBSSID[apidx].BeaconBuf;
#if defined(DOT11_N_SUPPORT) && defined(DOT11K_RRM_SUPPORT)
UINT i;
#endif /* defined(DOT11_N_SUPPORT) && defined(DOT11K_RRM_SUPPORT) */
HTTRANSMIT_SETTING BeaconTransmit = {.word = 0}; /* MGMT frame PHY rate setting when operatin at Ht rate. */
UCHAR PhyMode, SupRateLen;
MULTISSID_STRUCT *pMbss = &pAd->ApCfg.MBSSID[apidx];
#ifdef SPECIFIC_TX_POWER_SUPPORT
UCHAR TxPwrAdj = 0;
#endif /* SPECIFIC_TX_POWER_SUPPORT */
if(!BeaconTransmitRequired(pAd, apidx, pMbss))
return;
PhyMode = pMbss->wdev.PhyMode;
if (pMbss->bHideSsid)
SsidLen = 0;
else
SsidLen = pMbss->SsidLen;
MgtMacHeaderInit(pAd, &BcnHdr, SUBTYPE_BEACON, 0, BROADCAST_ADDR,
pMbss->wdev.if_addr,
pMbss->wdev.bssid);
/* for update framelen to TxWI later. */
SupRateLen = pAd->CommonCfg.SupRateLen;
if (PhyMode == WMODE_B)
SupRateLen = 4;
MakeOutgoingFrame(pBeaconFrame, &FrameLen,
sizeof(HEADER_802_11), &BcnHdr,
TIMESTAMP_LEN, &FakeTimestamp,
2, &pAd->CommonCfg.BeaconPeriod,
2, &pMbss->CapabilityInfo,
1, &SsidIe,
1, &SsidLen,
SsidLen, pMbss->Ssid,
1, &SupRateIe,
1, &SupRateLen,
SupRateLen, pAd->CommonCfg.SupRate,
1, &DsIe,
1, &DsLen,
1, &pAd->CommonCfg.Channel,
END_OF_ARGS);
if ((pAd->CommonCfg.ExtRateLen) && (PhyMode != WMODE_B))
{
ULONG TmpLen;
MakeOutgoingFrame(pBeaconFrame+FrameLen, &TmpLen,
1, &ExtRateIe,
1, &pAd->CommonCfg.ExtRateLen,
pAd->CommonCfg.ExtRateLen, pAd->CommonCfg.ExtRate,
END_OF_ARGS);
FrameLen += TmpLen;
}
/* add country IE, power constraint IE */
if (pAd->CommonCfg.bCountryFlag)
{
ULONG TmpLen, TmpLen2=0;
UCHAR *TmpFrame = NULL;
UCHAR CountryIe = IE_COUNTRY;
os_alloc_mem(NULL, (UCHAR **)&TmpFrame, 256);
if (TmpFrame != NULL)
{
NdisZeroMemory(TmpFrame, 256);
/* prepare channel information */
#ifdef EXT_BUILD_CHANNEL_LIST
BuildBeaconChList(pAd, TmpFrame, &TmpLen2);
#else
{
UCHAR MaxTxPower = GetCuntryMaxTxPwr(pAd, pAd->CommonCfg.Channel);
MakeOutgoingFrame(TmpFrame+TmpLen2, &TmpLen,
1, &pAd->ChannelList[0].Channel,
1, &pAd->ChannelListNum,
1, &MaxTxPower,
END_OF_ARGS);
TmpLen2 += TmpLen;
}
#endif /* EXT_BUILD_CHANNEL_LIST */
#ifdef DOT11K_RRM_SUPPORT
if (IS_RRM_ENABLE(pAd, apidx)
&& (pAd->CommonCfg.RegulatoryClass[0] != 0))
{
TmpLen2 = 0;
NdisZeroMemory(TmpFrame, sizeof(TmpFrame));
RguClass_BuildBcnChList(pAd, TmpFrame, &TmpLen2);
}
#endif /* DOT11K_RRM_SUPPORT */
/* need to do the padding bit check, and concatenate it */
if ((TmpLen2%2) == 0)
{
UCHAR TmpLen3 = TmpLen2+4;
MakeOutgoingFrame(pBeaconFrame+FrameLen,&TmpLen,
1, &CountryIe,
1, &TmpLen3,
3, pAd->CommonCfg.CountryCode,
TmpLen2+1, TmpFrame,
END_OF_ARGS);
}
else
{
UCHAR TmpLen3 = TmpLen2+3;
MakeOutgoingFrame(pBeaconFrame+FrameLen,&TmpLen,
1, &CountryIe,
1, &TmpLen3,
3, pAd->CommonCfg.CountryCode,
TmpLen2, TmpFrame,
END_OF_ARGS);
}
FrameLen += TmpLen;
os_free_mem(NULL, TmpFrame);
}
else
DBGPRINT(RT_DEBUG_ERROR, ("%s: Allocate memory fail!!!\n", __FUNCTION__));
}
#ifdef DOT11K_RRM_SUPPORT
if (IS_RRM_ENABLE(pAd, apidx))
{
InsertTpcReportIE(pAd, pBeaconFrame+FrameLen, &FrameLen,
RTMP_GetTxPwr(pAd, pAd->CommonCfg.MlmeTransmit), 0);
RRM_InsertRRMEnCapIE(pAd, pBeaconFrame+FrameLen, &FrameLen, apidx);
}
#endif /* DOT11K_RRM_SUPPORT */
#ifdef DOT11_N_SUPPORT
/* AP Channel Report */
#ifdef DOT11K_RRM_SUPPORT
for (i=0; i<MAX_NUM_OF_REGULATORY_CLASS; i++)
{
if (pAd->CommonCfg.RegulatoryClass[i] == 0)
break;
InsertChannelRepIE(pAd, pBeaconFrame+FrameLen, &FrameLen,
(PSTRING)pAd->CommonCfg.CountryCode,
pAd->CommonCfg.RegulatoryClass[i]);
}
#else
{
UCHAR APChannelReportIe = IE_AP_CHANNEL_REPORT;
ULONG TmpLen;
/*
802.11n D2.0 Annex J, USA regulatory
class 32, channel set 1~7
class 33, channel set 5-11
*/
UCHAR rclass32[]={32, 1, 2, 3, 4, 5, 6, 7};
UCHAR rclass33[]={33, 5, 6, 7, 8, 9, 10, 11};
UCHAR rclasslen = 8; /*sizeof(rclass32); */
if (PhyMode == (WMODE_B | WMODE_G | WMODE_GN))
{
MakeOutgoingFrame(pBeaconFrame+FrameLen,&TmpLen,
1, &APChannelReportIe,
1, &rclasslen,
rclasslen, rclass32,
1, &APChannelReportIe,
1, &rclasslen,
rclasslen, rclass33,
END_OF_ARGS);
FrameLen += TmpLen;
}
}
#endif
#endif /* DOT11_N_SUPPORT */
#ifdef DOT11R_FT_SUPPORT
/* The Mobility Domain information element (MDIE) is present in Beacon
** frame when dot11FastBssTransitionEnable is set to true. */
if (pAd->ApCfg.MBSSID[apidx].FtCfg.FtCapFlag.Dot11rFtEnable)
{
PFT_CFG pFtCfg = &pAd->ApCfg.MBSSID[apidx].FtCfg;
FT_CAP_AND_POLICY FtCap;
NdisZeroMemory(&FtCap, sizeof(FT_CAP_AND_POLICY));
FtCap.field.FtOverDs = pFtCfg->FtCapFlag.FtOverDs;
FtCap.field.RsrReqCap = pFtCfg->FtCapFlag.RsrReqCap;
FT_InsertMdIE(pAd, pBeaconFrame + FrameLen, &FrameLen,
pFtCfg->FtMdId, FtCap);
}
#endif /* DOT11R_FT_SUPPORT */
BeaconTransmit.word = 0;
#ifdef SPECIFIC_TX_POWER_SUPPORT
/* Specific Power for Long-Range Beacon */
if ((pAd->ApCfg.MBSSID[apidx].TxPwrAdj != -1) /* &&
(BeaconTransmit.field.MODE == MODE_CCK)*/)
{
TxPwrAdj = pAd->ApCfg.MBSSID[apidx].TxPwrAdj;
}
#endif /* SPECIFIC_TX_POWER_SUPPORT */
RTMPWriteTxWI(pAd, &pAd->BeaconTxWI, FALSE, FALSE, TRUE, FALSE, FALSE, TRUE, 0, BSS0Mcast_WCID,
FrameLen, PID_MGMT, 0, 0,IFS_HTTXOP, &BeaconTransmit);
#ifdef SPECIFIC_TX_POWER_SUPPORT
#ifdef RTMP_MAC
if ((IS_RT6352(pAd) || IS_MT76x2(pAd)) && (pAd->chipCap.hif_type == HIF_RTMP))
pAd->BeaconTxWI.TXWI_O.TxPwrAdj = TxPwrAdj;
#endif /* RTMP_MAC */
#ifdef RLT_MAC
if ((IS_RT6352(pAd) || IS_MT76x2(pAd)) && (pAd->chipCap.hif_type == HIF_RLT))
pAd->BeaconTxWI.TXWI_N.TxPwrAdj = TxPwrAdj;
#endif /* RLT_MAC */
#endif /* SPECIFIC_TX_POWER_SUPPORT */
/*
step 6. move BEACON TXD and frame content to on-chip memory
*/
updateAllBeacon(pAd, apidx, FrameLen);
pMbss->TimIELocationInBeacon = (UCHAR)FrameLen;
pMbss->CapabilityInfoLocationInBeacon = sizeof(HEADER_802_11) + TIMESTAMP_LEN + 2;
}
void updateAllBeacon(RTMP_ADAPTER *pAd, INT apidx, ULONG FrameLen)
{
UCHAR *ptr = NULL;
MULTISSID_STRUCT *pMbss = &pAd->ApCfg.MBSSID[apidx];
UINT32 longValue, reg_base;
UINT i = 0;
UINT8 TXWISize = pAd->chipCap.TXWISize;
ptr = (PUCHAR)&pAd->BeaconTxWI;
#ifdef RT_BIG_ENDIAN
RTMPWIEndianChange(pAd, ptr, TYPE_TXWI);
#endif
reg_base = pAd->BeaconOffset[pMbss->BcnBufIdx];
for (i=0; i < TXWISize; i+=4)
{
longValue = *ptr + (*(ptr+1)<<8) + (*(ptr+2)<<16) + (*(ptr+3)<<24);
RTMP_CHIP_UPDATE_BEACON(pAd, reg_base + i, longValue, 4);
ptr += 4;
}
/* update BEACON frame content. start right after the TXWI field. */
ptr = (PUCHAR)pMbss->BeaconBuf;
#ifdef RT_BIG_ENDIAN
RTMPFrameEndianChange(pAd, ptr, DIR_WRITE, FALSE);
#endif
reg_base = pAd->BeaconOffset[pMbss->BcnBufIdx] + TXWISize;
for (i= 0; i< FrameLen; i+=4)
{
longValue = *ptr + (*(ptr+1)<<8) + (*(ptr+2)<<16) + (*(ptr+3)<<24);
RTMP_CHIP_UPDATE_BEACON(pAd, reg_base + i, longValue, 4);
ptr += 4;
}
}
/*
==========================================================================
Description:
Pre-build a BEACON frame in the shared memory
==========================================================================
*/
VOID APMakeBssBeacon(
IN PRTMP_ADAPTER pAd,
IN INT apidx)
{
UCHAR DsLen = 1, SsidLen;/*, TimLen = 4, */
/*BitmapControl = 0, VirtualBitmap = 0, EmptySsidLen = 0, SsidLen; */
/* UCHAR RSNIe=IE_WPA, RSNIe2=IE_WPA2; */
HEADER_802_11 BcnHdr;
LARGE_INTEGER FakeTimestamp;
ULONG FrameLen = 0;
PTXWI_STRUC pTxWI = &pAd->BeaconTxWI;
PUCHAR pBeaconFrame = (PUCHAR)pAd->ApCfg.MBSSID[apidx].BeaconBuf;
UCHAR *ptr;
UINT i;
UINT32 longValue, reg_base;
HTTRANSMIT_SETTING BeaconTransmit; /* MGMT frame PHY rate setting when operatin at Ht rate. */
UCHAR PhyMode, SupRateLen;
UINT8 TXWISize = pAd->chipCap.TXWISize;
if(!BeaconTransmitRequired(pAd, apidx, &pAd->ApCfg.MBSSID[apidx]))
return;
PhyMode = pAd->ApCfg.MBSSID[apidx].PhyMode;
if (pAd->ApCfg.MBSSID[apidx].bHideSsid)
SsidLen = 0;
else
SsidLen = pAd->ApCfg.MBSSID[apidx].SsidLen;
MgtMacHeaderInit(pAd, &BcnHdr, SUBTYPE_BEACON, 0, BROADCAST_ADDR,
pAd->ApCfg.MBSSID[apidx].Bssid);
/* for update framelen to TxWI later. */
SupRateLen = pAd->CommonCfg.SupRateLen;
if (PhyMode == PHY_11B)
SupRateLen = 4;
MakeOutgoingFrame(pBeaconFrame, &FrameLen,
sizeof(HEADER_802_11), &BcnHdr,
TIMESTAMP_LEN, &FakeTimestamp,
2, &pAd->CommonCfg.BeaconPeriod,
2, &pAd->ApCfg.MBSSID[apidx].CapabilityInfo,
1, &SsidIe,
1, &SsidLen,
SsidLen, pAd->ApCfg.MBSSID[apidx].Ssid,
1, &SupRateIe,
1, &SupRateLen,
SupRateLen, pAd->CommonCfg.SupRate,
1, &DsIe,
1, &DsLen,
1, &pAd->CommonCfg.Channel,
END_OF_ARGS);
if ((pAd->CommonCfg.ExtRateLen) && (PhyMode != PHY_11B))
{
ULONG TmpLen;
MakeOutgoingFrame(pBeaconFrame+FrameLen, &TmpLen,
1, &ExtRateIe,
1, &pAd->CommonCfg.ExtRateLen,
pAd->CommonCfg.ExtRateLen, pAd->CommonCfg.ExtRate,
END_OF_ARGS);
FrameLen += TmpLen;
}
/* add country IE, power constraint IE */
if (pAd->CommonCfg.bCountryFlag)
{
ULONG TmpLen, TmpLen2=0;
/* UCHAR TmpFrame[256]; */
UCHAR *TmpFrame = NULL;
UCHAR CountryIe = IE_COUNTRY;
os_alloc_mem(NULL, (UCHAR **)&TmpFrame, 256);
if (TmpFrame != NULL)
{
NdisZeroMemory(TmpFrame, 256);
/* prepare channel information */
#ifdef EXT_BUILD_CHANNEL_LIST
BuildBeaconChList(pAd, TmpFrame, &TmpLen2);
#else
{
UCHAR MaxTxPower = GetCuntryMaxTxPwr(pAd, pAd->CommonCfg.Channel);
MakeOutgoingFrame(TmpFrame+TmpLen2, &TmpLen,
1, &pAd->ChannelList[0].Channel,
1, &pAd->ChannelListNum,
1, &MaxTxPower,
END_OF_ARGS);
TmpLen2 += TmpLen;
}
#endif /* EXT_BUILD_CHANNEL_LIST */
/* need to do the padding bit check, and concatenate it */
if ((TmpLen2%2) == 0)
{
UCHAR TmpLen3 = TmpLen2+4;
MakeOutgoingFrame(pBeaconFrame+FrameLen,&TmpLen,
1, &CountryIe,
1, &TmpLen3,
3, pAd->CommonCfg.CountryCode,
TmpLen2+1, TmpFrame,
END_OF_ARGS);
}
else
{
UCHAR TmpLen3 = TmpLen2+3;
MakeOutgoingFrame(pBeaconFrame+FrameLen,&TmpLen,
1, &CountryIe,
1, &TmpLen3,
3, pAd->CommonCfg.CountryCode,
TmpLen2, TmpFrame,
END_OF_ARGS);
}
FrameLen += TmpLen;
os_free_mem(NULL, TmpFrame);
}
else
DBGPRINT(RT_DEBUG_ERROR, ("%s: Allocate memory fail!!!\n", __FUNCTION__));
}
#ifdef DOT11_N_SUPPORT
/* AP Channel Report */
{
UCHAR APChannelReportIe = IE_AP_CHANNEL_REPORT;
ULONG TmpLen;
/*
802.11n D2.0 Annex J, USA regulatory
class 32, channel set 1~7
class 33, channel set 5-11
*/
UCHAR rclass32[]={32, 1, 2, 3, 4, 5, 6, 7};
UCHAR rclass33[]={33, 5, 6, 7, 8, 9, 10, 11};
UCHAR rclasslen = 8; /*sizeof(rclass32); */
if (PhyMode == PHY_11BGN_MIXED)
{
MakeOutgoingFrame(pBeaconFrame+FrameLen,&TmpLen,
1, &APChannelReportIe,
1, &rclasslen,
rclasslen, rclass32,
1, &APChannelReportIe,
1, &rclasslen,
rclasslen, rclass33,
END_OF_ARGS);
FrameLen += TmpLen;
}
}
#endif /* DOT11_N_SUPPORT */
BeaconTransmit.word = 0;
RTMPWriteTxWI(pAd, pTxWI, FALSE, FALSE, TRUE, FALSE, FALSE, TRUE, 0, BSS0Mcast_WCID,
FrameLen, PID_MGMT, 0, 0,IFS_HTTXOP, FALSE, &BeaconTransmit);
/*
step 6. move BEACON TXD and frame content to on-chip memory
*/
ptr = (PUCHAR)&pAd->BeaconTxWI;
#ifdef RT_BIG_ENDIAN
RTMPWIEndianChange(pAd, ptr, TYPE_TXWI);
#endif
reg_base = pAd->BeaconOffset[pAd->ApCfg.MBSSID[apidx].BcnBufIdx];
for (i=0; i < TXWISize; i+=4)
{
longValue = *ptr + (*(ptr+1)<<8) + (*(ptr+2)<<16) + (*(ptr+3)<<24);
RTMP_CHIP_UPDATE_BEACON(pAd, reg_base + i, longValue, 4);
ptr += 4;
}
/* update BEACON frame content. start right after the TXWI field. */
ptr = (PUCHAR)pAd->ApCfg.MBSSID[apidx].BeaconBuf;
#ifdef RT_BIG_ENDIAN
RTMPFrameEndianChange(pAd, ptr, DIR_WRITE, FALSE);
#endif
reg_base = pAd->BeaconOffset[pAd->ApCfg.MBSSID[apidx].BcnBufIdx] + TXWISize;
for (i= 0; i< FrameLen; i+=4)
{
longValue = *ptr + (*(ptr+1)<<8) + (*(ptr+2)<<16) + (*(ptr+3)<<24);
RTMP_CHIP_UPDATE_BEACON(pAd, reg_base + i, longValue, 4);
ptr += 4;
}
pAd->ApCfg.MBSSID[apidx].TimIELocationInBeacon = (UCHAR)FrameLen;
pAd->ApCfg.MBSSID[apidx].CapabilityInfoLocationInBeacon = sizeof(HEADER_802_11) + TIMESTAMP_LEN + 2;
}
