RTDECL(uint32_t) RTMpGetMaxFrequency(RTCPUID idCpu)
{
char szFreqLevels[20]; /* Should be enough to get the highest level which is always the first. */
size_t cbFreqLevels = sizeof(szFreqLevels);
if (!RTMpIsCpuOnline(idCpu))
return 0;
memset(szFreqLevels, 0, sizeof(szFreqLevels));
/*
* CPU 0 has the freq levels entry. ENOMEM is ok as we don't need all supported
* levels but only the first one.
*/
int rc = sysctlbyname("dev.cpu.0.freq_levels", szFreqLevels, &cbFreqLevels, NULL, NULL);
if ( (rc && (errno != ENOMEM))
|| (cbFreqLevels == 0))
return 0;
/* Clear everything starting from the '/' */
unsigned i = 0;
do
{
if (szFreqLevels[i] == '/')
{
memset(&szFreqLevels[i], 0, sizeof(szFreqLevels) - i);
break;
}
i++;
} while (i < sizeof(szFreqLevels));
/* Returns 0 on failure. */
return RTStrToUInt32(szFreqLevels);
}
DECLINLINE(int) vboxNetAdpGetUnitByName(const char *pcszName)
{
uint32_t iUnit = RTStrToUInt32(pcszName + sizeof(VBOXNETADP_NAME) - 1);
bool fOld;
if (iUnit >= VBOXNETADP_MAX_UNITS)
return -1;
fOld = ASMAtomicBitTestAndSet(g_aUnits, iUnit);
return fOld ? -1 : (int)iUnit;
}
/**
* Returns a 32-bit unsigned integer of a specified key.
*
* @return IPRT status code. VERR_NOT_FOUND if key was not found.
* @param pszKey Name of key to get the value for.
* @param puVal Pointer to value to return.
*/
int GuestProcessStreamBlock::GetUInt32Ex(const char *pszKey, uint32_t *puVal) const
{
AssertPtrReturn(pszKey, VERR_INVALID_POINTER);
AssertPtrReturn(puVal, VERR_INVALID_POINTER);
const char *pszValue = GetString(pszKey);
if (pszValue)
{
*puVal = RTStrToUInt32(pszValue);
return VINF_SUCCESS;
}
return VERR_NOT_FOUND;
}
int localMappings(const ComNatPtr& nat, AddressToOffsetMapping& mapping)
{
mapping.clear();
ComBstrArray strs;
size_t cStrs;
HRESULT hrc = nat->COMGETTER(LocalMappings)(ComSafeArrayAsOutParam(strs));
if ( SUCCEEDED(hrc)
&& (cStrs = strs.size()))
{
for (size_t i = 0; i < cStrs; ++i)
{
char szAddr[17];
RTNETADDRIPV4 ip4addr;
char *pszTerm;
uint32_t u32Off;
com::Utf8Str strLo2Off(strs[i]);
const char *pszLo2Off = strLo2Off.c_str();
RT_ZERO(szAddr);
pszTerm = RTStrStr(pszLo2Off, "=");
if ( pszTerm
&& (pszTerm - pszLo2Off) <= INET_ADDRSTRLEN)
{
memcpy(szAddr, pszLo2Off, (pszTerm - pszLo2Off));
int rc = RTNetStrToIPv4Addr(szAddr, &ip4addr);
if (RT_SUCCESS(rc))
{
u32Off = RTStrToUInt32(pszTerm + 1);
if (u32Off != 0)
mapping.insert(
AddressToOffsetMapping::value_type(ip4addr, u32Off));
}
}
}
}
else
return VERR_NOT_FOUND;
return VINF_SUCCESS;
}
uint32_t CollectorSolaris::getInstance(const char *pszIfaceName, char *pszDevName)
{
/*
* Get the instance number from the interface name, then clip it off.
*/
int cbInstance = 0;
int cbIface = strlen(pszIfaceName);
const char *pszEnd = pszIfaceName + cbIface - 1;
for (int i = 0; i < cbIface - 1; i++)
{
if (!RT_C_IS_DIGIT(*pszEnd))
break;
cbInstance++;
pszEnd--;
}
uint32_t uInstance = RTStrToUInt32(pszEnd + 1);
strncpy(pszDevName, pszIfaceName, cbIface - cbInstance);
pszDevName[cbIface - cbInstance] = '\0';
return uInstance;
}
static uint32_t getInterfaceSpeed(const char *pszName)
{
/*
* I wish I could do simple ioctl here, but older kernels require root
* privileges for any ethtool commands.
*/
char szBuf[256];
uint32_t uSpeed = 0;
/* First, we try to retrieve the speed via sysfs. */
RTStrPrintf(szBuf, sizeof(szBuf), "/sys/class/net/%s/speed", pszName);
FILE *fp = fopen(szBuf, "r");
if (fp)
{
if (fscanf(fp, "%u", &uSpeed) != 1)
uSpeed = 0;
fclose(fp);
}
if (uSpeed == 10)
{
/* Check the cable is plugged in at all */
unsigned uCarrier = 0;
RTStrPrintf(szBuf, sizeof(szBuf), "/sys/class/net/%s/carrier", pszName);
fp = fopen(szBuf, "r");
if (fp)
{
if (fscanf(fp, "%u", &uCarrier) != 1 || uCarrier == 0)
uSpeed = 0;
fclose(fp);
}
}
if (uSpeed == 0)
{
/* Failed to get speed via sysfs, go to plan B. */
int rc = NetIfAdpCtlOut(pszName, "speed", szBuf, sizeof(szBuf));
if (RT_SUCCESS(rc))
uSpeed = RTStrToUInt32(szBuf);
}
return uSpeed;
}
RTR3DECL(bool) RTProcIsRunningByName(const char *pszName)
{
/*
* Quick validation.
*/
if (!pszName)
return false;
bool const fWithPath = RTPathHavePath(pszName);
/*
* Enumerate /proc.
*/
RTDIR hDir;
int rc = RTDirOpen(&hDir, "/proc");
AssertMsgRCReturn(rc, ("RTDirOpen on /proc failed: rc=%Rrc\n", rc), false);
if (RT_SUCCESS(rc))
{
RTDIRENTRY DirEntry;
while (RT_SUCCESS(RTDirRead(hDir, &DirEntry, NULL)))
{
/*
* Filter numeric directory entries only.
*/
if ( ( DirEntry.enmType == RTDIRENTRYTYPE_DIRECTORY
|| DirEntry.enmType == RTDIRENTRYTYPE_UNKNOWN)
&& RTStrToUInt32(DirEntry.szName) > 0)
{
/*
* Try readlink on exe first since it's more faster and reliable.
* Fall back on reading the first line in cmdline if that fails
* (access errors typically). cmdline is unreliable as it might
* contain whatever the execv caller passes as argv[0].
*/
char szName[RTPATH_MAX];
RTStrPrintf(szName, sizeof(szName), "/proc/%s/exe", &DirEntry.szName[0]);
char szExe[RTPATH_MAX];
int cchLink = readlink(szName, szExe, sizeof(szExe) - 1);
if ( cchLink > 0
&& (size_t)cchLink < sizeof(szExe))
{
szExe[cchLink] = '\0';
rc = VINF_SUCCESS;
}
else
{
RTStrPrintf(szName, sizeof(szName), "/proc/%s/cmdline", &DirEntry.szName[0]);
PRTSTREAM pStream;
rc = RTStrmOpen(szName, "r", &pStream);
if (RT_SUCCESS(rc))
{
rc = RTStrmGetLine(pStream, szExe, sizeof(szExe));
RTStrmClose(pStream);
}
}
if (RT_SUCCESS(rc))
{
/*
* We are interested on the file name part only.
*/
char const *pszProcName = fWithPath ? szExe : RTPathFilename(szExe);
if (RTStrCmp(pszProcName, pszName) == 0)
{
/* Found it! */
RTDirClose(hDir);
return true;
}
}
}
}
RTDirClose(hDir);
}
return false;
}
int main(int argc, char **argv)
{
int rcRet = 0;
int i;
int rc;
int cIterations = argc > 1 ? RTStrToUInt32(argv[1]) : 32;
if (cIterations == 0)
cIterations = 64;
/*
* Init.
*/
RTR3InitExe(argc, &argv, 0);
PSUPDRVSESSION pSession;
rc = SUPR3Init(&pSession);
rcRet += rc != 0;
RTPrintf("tstInt: SUPR3Init -> rc=%Rrc\n", rc);
char szFile[RTPATH_MAX];
if (!rc)
{
rc = RTPathExecDir(szFile, sizeof(szFile) - sizeof("/VMMR0.r0"));
}
char szAbsFile[RTPATH_MAX];
if (RT_SUCCESS(rc))
{
strcat(szFile, "/VMMR0.r0");
rc = RTPathAbs(szFile, szAbsFile, sizeof(szAbsFile));
}
if (RT_SUCCESS(rc))
{
/*
* Load VMM code.
*/
rc = SUPR3LoadVMM(szAbsFile);
if (RT_SUCCESS(rc))
{
/*
* Create a fake 'VM'.
*/
PVMR0 pVMR0 = NIL_RTR0PTR;
PVM pVM = NULL;
const unsigned cPages = RT_ALIGN_Z(sizeof(*pVM), PAGE_SIZE) >> PAGE_SHIFT;
PSUPPAGE paPages = (PSUPPAGE)RTMemAllocZ(cPages * sizeof(SUPPAGE));
if (paPages)
rc = SUPR3LowAlloc(cPages, (void **)&pVM, &pVMR0, &paPages[0]);
else
rc = VERR_NO_MEMORY;
if (RT_SUCCESS(rc))
{
pVM->pVMRC = 0;
pVM->pVMR3 = pVM;
pVM->pVMR0 = pVMR0;
pVM->paVMPagesR3 = paPages;
pVM->pSession = pSession;
pVM->enmVMState = VMSTATE_CREATED;
rc = SUPR3SetVMForFastIOCtl(pVMR0);
if (!rc)
{
/*
* Call VMM code with invalid function.
*/
for (i = cIterations; i > 0; i--)
{
rc = SUPR3CallVMMR0(pVMR0, NIL_VMCPUID, VMMR0_DO_SLOW_NOP, NULL);
if (rc != VINF_SUCCESS)
{
RTPrintf("tstInt: SUPR3CallVMMR0 -> rc=%Rrc i=%d Expected VINF_SUCCESS!\n", rc, i);
rcRet++;
break;
}
}
RTPrintf("tstInt: Performed SUPR3CallVMMR0 %d times (rc=%Rrc)\n", cIterations, rc);
/*
* The fast path.
*/
if (rc == VINF_SUCCESS)
{
RTTimeNanoTS();
uint64_t StartTS = RTTimeNanoTS();
uint64_t StartTick = ASMReadTSC();
uint64_t MinTicks = UINT64_MAX;
for (i = 0; i < 1000000; i++)
{
uint64_t OneStartTick = ASMReadTSC();
rc = SUPR3CallVMMR0Fast(pVMR0, VMMR0_DO_NOP, 0);
uint64_t Ticks = ASMReadTSC() - OneStartTick;
if (Ticks < MinTicks)
MinTicks = Ticks;
if (RT_UNLIKELY(rc != VINF_SUCCESS))
{
RTPrintf("tstInt: SUPR3CallVMMR0Fast -> rc=%Rrc i=%d Expected VINF_SUCCESS!\n", rc, i);
rcRet++;
break;
}
}
uint64_t Ticks = ASMReadTSC() - StartTick;
uint64_t NanoSecs = RTTimeNanoTS() - StartTS;
RTPrintf("tstInt: SUPR3CallVMMR0Fast - %d iterations in %llu ns / %llu ticks. %llu ns / %#llu ticks per iteration. Min %llu ticks.\n",
i, NanoSecs, Ticks, NanoSecs / i, Ticks / i, MinTicks);
/*
* The ordinary path.
*/
RTTimeNanoTS();
StartTS = RTTimeNanoTS();
StartTick = ASMReadTSC();
MinTicks = UINT64_MAX;
for (i = 0; i < 1000000; i++)
{
uint64_t OneStartTick = ASMReadTSC();
rc = SUPR3CallVMMR0Ex(pVMR0, NIL_VMCPUID, VMMR0_DO_SLOW_NOP, 0, NULL);
uint64_t OneTicks = ASMReadTSC() - OneStartTick;
if (OneTicks < MinTicks)
MinTicks = OneTicks;
if (RT_UNLIKELY(rc != VINF_SUCCESS))
{
RTPrintf("tstInt: SUPR3CallVMMR0Ex -> rc=%Rrc i=%d Expected VINF_SUCCESS!\n", rc, i);
rcRet++;
break;
}
}
Ticks = ASMReadTSC() - StartTick;
NanoSecs = RTTimeNanoTS() - StartTS;
RTPrintf("tstInt: SUPR3CallVMMR0Ex - %d iterations in %llu ns / %llu ticks. %llu ns / %#llu ticks per iteration. Min %llu ticks.\n",
i, NanoSecs, Ticks, NanoSecs / i, Ticks / i, MinTicks);
}
}
else
{
RTPrintf("tstInt: SUPR3SetVMForFastIOCtl failed: %Rrc\n", rc);
rcRet++;
}
}
else
{
RTPrintf("tstInt: SUPR3ContAlloc(%#zx,,) failed\n", sizeof(*pVM));
rcRet++;
}
/*
* Unload VMM.
*/
rc = SUPR3UnloadVMM();
if (rc)
{
RTPrintf("tstInt: SUPR3UnloadVMM failed with rc=%Rrc\n", rc);
rcRet++;
}
}
else
{
RTPrintf("tstInt: SUPR3LoadVMM failed with rc=%Rrc\n", rc);
rcRet++;
}
/*
* Terminate.
*/
rc = SUPR3Term(false /*fForced*/);
rcRet += rc != 0;
RTPrintf("tstInt: SUPR3Term -> rc=%Rrc\n", rc);
}
/** @note To be called only from #AssignMachine() */
HRESULT Session::grabIPCSemaphore()
{
HRESULT rc = E_FAIL;
/* open the IPC semaphore based on the sessionId and try to grab it */
Bstr ipcId;
rc = mControl->GetIPCId(ipcId.asOutParam());
AssertComRCReturnRC(rc);
LogFlowThisFunc(("ipcId='%ls'\n", ipcId.raw()));
#if defined(RT_OS_WINDOWS)
/*
* Since Session is an MTA object, this method can be executed on
* any thread, and this thread will not necessarily match the thread on
* which close() will be called later. Therefore, we need a separate
* thread to hold the IPC mutex and then release it in close().
*/
mIPCThreadSem = ::CreateEvent(NULL, FALSE, FALSE, NULL);
AssertMsgReturn(mIPCThreadSem,
("Cannot create an event sem, err=%d", ::GetLastError()),
E_FAIL);
void *data[3];
data[0] = (void*)(BSTR)ipcId.raw();
data[1] = (void*)mIPCThreadSem;
data[2] = 0; /* will get an output from the thread */
/* create a thread to hold the IPC mutex until signalled to release it */
RTTHREAD tid;
int vrc = RTThreadCreate(&tid, IPCMutexHolderThread, (void*)data, 0, RTTHREADTYPE_MAIN_WORKER, 0, "IPCHolder");
AssertRCReturn(vrc, E_FAIL);
/* wait until thread init is completed */
DWORD wrc = ::WaitForSingleObject(mIPCThreadSem, INFINITE);
AssertMsg(wrc == WAIT_OBJECT_0, ("Wait failed, err=%d\n", ::GetLastError()));
Assert(data[2]);
if (wrc == WAIT_OBJECT_0 && data[2])
{
/* memorize the event sem we should signal in close() */
mIPCSem = (HANDLE)data[2];
rc = S_OK;
}
else
{
::CloseHandle(mIPCThreadSem);
mIPCThreadSem = NULL;
rc = E_FAIL;
}
#elif defined(RT_OS_OS2)
/* We use XPCOM where any message (including close()) can arrive on any
* worker thread (which will not necessarily match this thread that opens
* the mutex). Therefore, we need a separate thread to hold the IPC mutex
* and then release it in close(). */
int vrc = RTSemEventCreate(&mIPCThreadSem);
AssertRCReturn(vrc, E_FAIL);
void *data[3];
data[0] = (void*)ipcId.raw();
data[1] = (void*)mIPCThreadSem;
data[2] = (void*)false; /* will get the thread result here */
/* create a thread to hold the IPC mutex until signalled to release it */
vrc = RTThreadCreate(&mIPCThread, IPCMutexHolderThread, (void *) data,
0, RTTHREADTYPE_MAIN_WORKER, 0, "IPCHolder");
AssertRCReturn(vrc, E_FAIL);
/* wait until thread init is completed */
vrc = RTThreadUserWait (mIPCThread, RT_INDEFINITE_WAIT);
AssertReturn(RT_SUCCESS(vrc) || vrc == VERR_INTERRUPTED, E_FAIL);
/* the thread must succeed */
AssertReturn((bool)data[2], E_FAIL);
#elif defined(VBOX_WITH_SYS_V_IPC_SESSION_WATCHER)
# ifdef VBOX_WITH_NEW_SYS_V_KEYGEN
Utf8Str ipcKey = ipcId;
key_t key = RTStrToUInt32(ipcKey.c_str());
AssertMsgReturn (key != 0,
("Key value of 0 is not valid for IPC semaphore"),
E_FAIL);
# else /* !VBOX_WITH_NEW_SYS_V_KEYGEN */
Utf8Str semName = ipcId;
char *pszSemName = NULL;
RTStrUtf8ToCurrentCP (&pszSemName, semName);
key_t key = ::ftok (pszSemName, 'V');
RTStrFree (pszSemName);
# endif /* !VBOX_WITH_NEW_SYS_V_KEYGEN */
mIPCSem = ::semget (key, 0, 0);
AssertMsgReturn (mIPCSem >= 0,
("Cannot open IPC semaphore, errno=%d", errno),
E_FAIL);
/* grab the semaphore */
::sembuf sop = { 0, -1, SEM_UNDO };
int rv = ::semop (mIPCSem, &sop, 1);
AssertMsgReturn (rv == 0,
("Cannot grab IPC semaphore, errno=%d", errno),
E_FAIL);
#else
# error "Port me!"
#endif
return rc;
}
static int getInterfaceInfo(int iSocket, const char *pszName, PNETIFINFO pInfo)
{
// Zeroing out pInfo is a bad idea as it should contain both short and long names at
// this point. So make sure the structure is cleared by the caller if necessary!
// memset(pInfo, 0, sizeof(*pInfo));
struct ifreq Req;
memset(&Req, 0, sizeof(Req));
strncpy(Req.ifr_name, pszName, sizeof(Req.ifr_name) - 1);
if (ioctl(iSocket, SIOCGIFHWADDR, &Req) >= 0)
{
switch (Req.ifr_hwaddr.sa_family)
{
case ARPHRD_ETHER:
pInfo->enmMediumType = NETIF_T_ETHERNET;
break;
default:
pInfo->enmMediumType = NETIF_T_UNKNOWN;
break;
}
/* Generate UUID from name and MAC address. */
RTUUID uuid;
RTUuidClear(&uuid);
memcpy(&uuid, Req.ifr_name, RT_MIN(sizeof(Req.ifr_name), sizeof(uuid)));
uuid.Gen.u8ClockSeqHiAndReserved = (uuid.Gen.u8ClockSeqHiAndReserved & 0x3f) | 0x80;
uuid.Gen.u16TimeHiAndVersion = (uuid.Gen.u16TimeHiAndVersion & 0x0fff) | 0x4000;
memcpy(uuid.Gen.au8Node, &Req.ifr_hwaddr.sa_data, sizeof(uuid.Gen.au8Node));
pInfo->Uuid = uuid;
memcpy(&pInfo->MACAddress, Req.ifr_hwaddr.sa_data, sizeof(pInfo->MACAddress));
if (ioctl(iSocket, SIOCGIFADDR, &Req) >= 0)
memcpy(pInfo->IPAddress.au8,
&((struct sockaddr_in *)&Req.ifr_addr)->sin_addr.s_addr,
sizeof(pInfo->IPAddress.au8));
if (ioctl(iSocket, SIOCGIFNETMASK, &Req) >= 0)
memcpy(pInfo->IPNetMask.au8,
&((struct sockaddr_in *)&Req.ifr_addr)->sin_addr.s_addr,
sizeof(pInfo->IPNetMask.au8));
if (ioctl(iSocket, SIOCGIFFLAGS, &Req) >= 0)
pInfo->enmStatus = Req.ifr_flags & IFF_UP ? NETIF_S_UP : NETIF_S_DOWN;
FILE *fp = fopen("/proc/net/if_inet6", "r");
if (fp)
{
RTNETADDRIPV6 IPv6Address;
unsigned uIndex, uLength, uScope, uTmp;
char szName[30];
for (;;)
{
memset(szName, 0, sizeof(szName));
int n = fscanf(fp,
"%08x%08x%08x%08x"
" %02x %02x %02x %02x %20s\n",
&IPv6Address.au32[0], &IPv6Address.au32[1],
&IPv6Address.au32[2], &IPv6Address.au32[3],
&uIndex, &uLength, &uScope, &uTmp, szName);
if (n == EOF)
break;
if (n != 9 || uLength > 128)
{
Log(("getInterfaceInfo: Error while reading /proc/net/if_inet6, n=%d uLength=%u\n",
n, uLength));
break;
}
if (!strcmp(Req.ifr_name, szName))
{
pInfo->IPv6Address.au32[0] = htonl(IPv6Address.au32[0]);
pInfo->IPv6Address.au32[1] = htonl(IPv6Address.au32[1]);
pInfo->IPv6Address.au32[2] = htonl(IPv6Address.au32[2]);
pInfo->IPv6Address.au32[3] = htonl(IPv6Address.au32[3]);
ASMBitSetRange(&pInfo->IPv6NetMask, 0, uLength);
}
}
fclose(fp);
}
/*
* Don't even try to get speed for non-Ethernet interfaces, it only
* produces errors.
*/
pInfo->uSpeedMbits = 0;
if (pInfo->enmMediumType == NETIF_T_ETHERNET)
{
/*
* I wish I could do simple ioctl here, but older kernels require root
* privileges for any ethtool commands.
*/
char szBuf[256];
/* First, we try to retrieve the speed via sysfs. */
RTStrPrintf(szBuf, sizeof(szBuf), "/sys/class/net/%s/speed", pszName);
fp = fopen(szBuf, "r");
if (fp)
{
if (fscanf(fp, "%u", &pInfo->uSpeedMbits) != 1)
pInfo->uSpeedMbits = 0;
fclose(fp);
}
if (pInfo->uSpeedMbits == 10)
{
/* Check the cable is plugged in at all */
unsigned uCarrier = 0;
RTStrPrintf(szBuf, sizeof(szBuf), "/sys/class/net/%s/carrier", pszName);
fp = fopen(szBuf, "r");
if (fp)
{
if (fscanf(fp, "%u", &uCarrier) != 1 || uCarrier == 0)
pInfo->uSpeedMbits = 0;
fclose(fp);
}
}
if (pInfo->uSpeedMbits == 0)
{
/* Failed to get speed via sysfs, go to plan B. */
int rc = NetIfAdpCtlOut(pszName, "speed", szBuf, sizeof(szBuf));
if (RT_SUCCESS(rc))
pInfo->uSpeedMbits = RTStrToUInt32(szBuf);
}
}
}
return VINF_SUCCESS;
}
/*
* Backend entry points.
*/
static DECLCALLBACK(int) iface_Open(PREMOTEUSBBACKEND pInstance, const char *pszAddress,
size_t cbAddress, PREMOTEUSBDEVICE *ppDevice)
{
int rc = VINF_SUCCESS;
RemoteUSBBackend *pThis = (RemoteUSBBackend *)pInstance;
REMOTEUSBDEVICE *pDevice = (REMOTEUSBDEVICE *)RTMemAllocZ(sizeof(REMOTEUSBDEVICE));
if (!pDevice)
{
rc = VERR_NO_MEMORY;
}
else
{
/* Parse given address string to find the device identifier.
* The format is "REMOTEUSB0xAAAABBBB&0xCCCCDDDD", where AAAABBBB is hex device identifier
* and CCCCDDDD is hex client id.
*/
if (strncmp(pszAddress, REMOTE_USB_BACKEND_PREFIX_S, REMOTE_USB_BACKEND_PREFIX_LEN) != 0)
{
AssertFailed();
rc = VERR_INVALID_PARAMETER;
}
else
{
/* Initialize the device structure. */
pDevice->pOwner = pThis;
pDevice->fWokenUp = false;
rc = RTCritSectInit(&pDevice->critsect);
AssertRC(rc);
if (RT_SUCCESS(rc))
{
pDevice->id = RTStrToUInt32(&pszAddress[REMOTE_USB_BACKEND_PREFIX_LEN]);
size_t l = strlen(pszAddress);
if (l >= REMOTE_USB_BACKEND_PREFIX_LEN + strlen("0x12345678&0x87654321"))
{
const char *p = &pszAddress[REMOTE_USB_BACKEND_PREFIX_LEN + strlen("0x12345678")];
if (*p == '&')
{
pDevice->u32ClientId = RTStrToUInt32(p + 1);
}
else
{
AssertFailed();
rc = VERR_INVALID_PARAMETER;
}
}
else
{
AssertFailed();
rc = VERR_INVALID_PARAMETER;
}
if (RT_SUCCESS(rc))
{
VRDE_USB_REQ_OPEN_PARM parm;
parm.code = VRDE_USB_REQ_OPEN;
parm.id = pDevice->id;
pThis->VRDPServer()->SendUSBRequest(pDevice->u32ClientId, &parm, sizeof(parm));
}
}
}
}
if (RT_SUCCESS(rc))
{
*ppDevice = pDevice;
pThis->addDevice(pDevice);
}
else
{
RTMemFree(pDevice);
}
return rc;
}
DECLEXPORT(int) pam_sm_authenticate(pam_handle_t *hPAM, int iFlags, int argc, const char **argv)
{
RT_NOREF1(iFlags);
/* Parse arguments. */
for (int i = 0; i < argc; i++)
{
if (!RTStrICmp(argv[i], "debug"))
g_verbosity = 1;
else
pam_vbox_error(hPAM, "pam_vbox_authenticate: unknown command line argument \"%s\"\n", argv[i]);
}
pam_vbox_log(hPAM, "pam_vbox_authenticate called\n");
int rc = pam_vbox_init(hPAM);
if (RT_FAILURE(rc))
return PAM_SUCCESS; /* Jump out as early as we can to not mess around. */
bool fFallback = true;
#ifdef VBOX_WITH_GUEST_PROPS
uint32_t uClientId;
rc = VbglR3GuestPropConnect(&uClientId);
if (RT_SUCCESS(rc))
{
char szVal[256];
rc = pam_vbox_read_prop(hPAM, uClientId,
"/VirtualBox/GuestAdd/PAM/CredsWait",
true /* Read-only on guest */,
szVal, sizeof(szVal));
if (RT_SUCCESS(rc))
{
/* All calls which are checked against rc2 are not critical, e.g. it does
* not matter if they succeed or not. */
uint32_t uTimeoutMS = RT_INDEFINITE_WAIT; /* Wait infinite by default. */
int rc2 = pam_vbox_read_prop(hPAM, uClientId,
"/VirtualBox/GuestAdd/PAM/CredsWaitTimeout",
true /* Read-only on guest */,
szVal, sizeof(szVal));
if (RT_SUCCESS(rc2))
{
uTimeoutMS = RTStrToUInt32(szVal);
if (!uTimeoutMS)
{
pam_vbox_error(hPAM, "pam_vbox_authenticate: invalid waiting timeout value specified, defaulting to infinite timeout\n");
uTimeoutMS = RT_INDEFINITE_WAIT;
}
else
uTimeoutMS = uTimeoutMS * 1000; /* Make ms out of s. */
}
rc2 = pam_vbox_read_prop(hPAM, uClientId,
"/VirtualBox/GuestAdd/PAM/CredsMsgWaiting",
true /* Read-only on guest */,
szVal, sizeof(szVal));
const char *pszWaitMsg = NULL;
if (RT_SUCCESS(rc2))
pszWaitMsg = szVal;
rc2 = vbox_set_msg(hPAM, 0 /* Info message */,
pszWaitMsg ? pszWaitMsg : "Waiting for credentials ...");
if (RT_FAILURE(rc2)) /* Not critical. */
pam_vbox_error(hPAM, "pam_vbox_authenticate: error setting waiting information message, rc=%Rrc\n", rc2);
if (RT_SUCCESS(rc))
{
/* Before we actuall wait for credentials just make sure we didn't already get credentials
* set so that we can skip waiting for them ... */
rc = pam_vbox_check_creds(hPAM);
if (rc == VERR_NOT_FOUND)
{
rc = pam_vbox_wait_for_creds(hPAM, uClientId, uTimeoutMS);
if (rc == VERR_TIMEOUT)
{
pam_vbox_log(hPAM, "pam_vbox_authenticate: no credentials given within time\n");
rc2 = pam_vbox_read_prop(hPAM, uClientId,
"/VirtualBox/GuestAdd/PAM/CredsMsgWaitTimeout",
true /* Read-only on guest */,
szVal, sizeof(szVal));
if (RT_SUCCESS(rc2))
{
rc2 = vbox_set_msg(hPAM, 0 /* Info message */, szVal);
AssertRC(rc2);
}
}
else if (rc == VERR_CANCELLED)
{
pam_vbox_log(hPAM, "pam_vbox_authenticate: waiting aborted\n");
rc2 = pam_vbox_read_prop(hPAM, uClientId,
"/VirtualBox/GuestAdd/PAM/CredsMsgWaitAbort",
true /* Read-only on guest */,
szVal, sizeof(szVal));
if (RT_SUCCESS(rc2))
{
rc2 = vbox_set_msg(hPAM, 0 /* Info message */, szVal);
AssertRC(rc2);
}
}
}
/* If we got here we don't need the fallback, so just deactivate it. */
fFallback = false;
}
}
VbglR3GuestPropDisconnect(uClientId);
}
#endif /* VBOX_WITH_GUEST_PROPS */
if (fFallback)
{
pam_vbox_log(hPAM, "pam_vbox_authenticate: falling back to old method\n");
/* If anything went wrong in the code above we just do a credentials
* check like it was before: Try retrieving the stuff and authenticating. */
int rc2 = pam_vbox_check_creds(hPAM);
if (RT_SUCCESS(rc))
rc = rc2;
}
pam_vbox_shutdown(hPAM);
pam_vbox_log(hPAM, "pam_vbox_authenticate: overall result rc=%Rrc\n", rc);
/* Never report an error here because if no credentials from the host are available or something
* went wrong we then let do the authentication by the next module in the stack. */
/* We report success here because this is all we can do right now -- we passed the credentials
* to the next PAM module in the block above which then might do a shadow (like pam_unix/pam_unix2)
* password verification to "really" authenticate the user. */
return PAM_SUCCESS;
}