/*
===================
R_AddModelSurfaces
Here is where dynamic models actually get instantiated, and necessary
interactions get created. This is all done on a sort-by-model basis
to keep source data in cache (most likely L2) as any interactions and
shadows are generated, since dynamic models will typically be lit by
two or more lights.
===================
*/
void R_AddModelSurfaces( void )
{
viewEntity_t *vEntity;
idInteraction *inter, *next;
idRenderModel *model;
// clear the ambient surface list
tr.viewDef->numDrawSurfs = 0;
tr.viewDef->maxDrawSurfs = 0; // will be set to INITIAL_DRAWSURFS on R_AddDrawSurf
// go through each entity that is either visible to the view, or to
// any light that intersects the view (for shadows)
for( vEntity = tr.viewDef->viewEntitys; vEntity; vEntity = vEntity->next )
{
if( r_useEntityScissors.GetBool() )
{
// calculate the screen area covered by the entity
idScreenRect scissorRect = R_CalcEntityScissorRectangle( vEntity );
// intersect with the portal crossing scissor rectangle
vEntity->scissorRect.Intersect( scissorRect );
if( r_showEntityScissors.GetBool() )
{
R_ShowColoredScreenRect( vEntity->scissorRect, vEntity->entityDef->index );
}
}
float oldFloatTime;
int oldTime;
game->SelectTimeGroup( vEntity->entityDef->parms.timeGroup );
if( vEntity->entityDef->parms.timeGroup )
{
oldFloatTime = tr.viewDef->floatTime;
oldTime = tr.viewDef->renderView.time;
tr.viewDef->floatTime = game->GetTimeGroupTime( vEntity->entityDef->parms.timeGroup ) * 0.001;
tr.viewDef->renderView.time = game->GetTimeGroupTime( vEntity->entityDef->parms.timeGroup );
}
if( tr.viewDef->isXraySubview && vEntity->entityDef->parms.xrayIndex == 1 )
{
if( vEntity->entityDef->parms.timeGroup )
{
tr.viewDef->floatTime = oldFloatTime;
tr.viewDef->renderView.time = oldTime;
}
continue;
}
else if( !tr.viewDef->isXraySubview && vEntity->entityDef->parms.xrayIndex == 2 )
{
if( vEntity->entityDef->parms.timeGroup )
{
tr.viewDef->floatTime = oldFloatTime;
tr.viewDef->renderView.time = oldTime;
}
continue;
}
// add the ambient surface if it has a visible rectangle
if( !vEntity->scissorRect.IsEmpty() )
{
model = R_EntityDefDynamicModel( vEntity->entityDef );
if( model == NULL || model->NumSurfaces() <= 0 )
{
if( vEntity->entityDef->parms.timeGroup )
{
tr.viewDef->floatTime = oldFloatTime;
tr.viewDef->renderView.time = oldTime;
}
continue;
}
R_AddAmbientDrawsurfs( vEntity );
tr.pc.c_visibleViewEntities++;
}
else
{
tr.pc.c_shadowViewEntities++;
}
// for all the entity / light interactions on this entity, add them to the view
if( tr.viewDef->isXraySubview )
{
if( vEntity->entityDef->parms.xrayIndex == 2 )
{
for( inter = vEntity->entityDef->firstInteraction; inter != NULL && !inter->IsEmpty(); inter = next )
{
next = inter->entityNext;
if( inter->lightDef->viewCount != tr.viewCount )
{
continue;
}
inter->AddActiveInteraction();
}
}
}
else
{
// all empty interactions are at the end of the list so once the
// first is encountered all the remaining interactions are empty
for( inter = vEntity->entityDef->firstInteraction; inter != NULL && !inter->IsEmpty(); inter = next )
{
next = inter->entityNext;
// skip any lights that aren't currently visible
// this is run after any lights that are turned off have already
// been removed from the viewLights list, and had their viewCount cleared
if( inter->lightDef->viewCount != tr.viewCount )
{
continue;
}
inter->AddActiveInteraction();
}
}
if( vEntity->entityDef->parms.timeGroup )
{
tr.viewDef->floatTime = oldFloatTime;
tr.viewDef->renderView.time = oldTime;
}
}
}
/*
==================
idInteraction::AddActiveInteraction
Create and add any necessary light and shadow triangles
If the model doesn't have any surfaces that need interactions
with this type of light, it can be skipped, but we might need to
instantiate the dynamic model to find out
==================
*/
void idInteraction::AddActiveInteraction( void ) {
viewLight_t * vLight;
viewEntity_t * vEntity;
idScreenRect shadowScissor;
idScreenRect lightScissor;
idVec3 localLightOrigin;
idVec3 localViewOrigin;
vLight = lightDef->viewLight;
vEntity = entityDef->viewEntity;
// do not waste time culling the interaction frustum if there will be no shadows
if ( !HasShadows() ) {
// use the entity scissor rectangle
shadowScissor = vEntity->scissorRect;
// culling does not seem to be worth it for static world models
} else if ( entityDef->parms.hModel->IsStaticWorldModel() ) {
// use the light scissor rectangle
shadowScissor = vLight->scissorRect;
} else {
// try to cull the interaction
// this will also cull the case where the light origin is inside the
// view frustum and the entity bounds are outside the view frustum
if ( CullInteractionByViewFrustum( tr.viewDef->viewFrustum ) ) {
return;
}
// calculate the shadow scissor rectangle
shadowScissor = CalcInteractionScissorRectangle( tr.viewDef->viewFrustum );
}
// get out before making the dynamic model if the shadow scissor rectangle is empty
if ( shadowScissor.IsEmpty() ) {
return;
}
// We will need the dynamic surface created to make interactions, even if the
// model itself wasn't visible. This just returns a cached value after it
// has been generated once in the view.
idRenderModel *model = R_EntityDefDynamicModel( entityDef );
if ( model == NULL || model->NumSurfaces() <= 0 ) {
return;
}
// the dynamic model may have changed since we built the surface list
if ( !IsDeferred() && entityDef->dynamicModelFrameCount != dynamicModelFrameCount ) {
FreeSurfaces();
}
dynamicModelFrameCount = entityDef->dynamicModelFrameCount;
// actually create the interaction if needed, building light and shadow surfaces as needed
if ( IsDeferred() ) {
CreateInteraction( model );
}
R_GlobalPointToLocal( vEntity->modelMatrix, lightDef->globalLightOrigin, localLightOrigin );
R_GlobalPointToLocal( vEntity->modelMatrix, tr.viewDef->renderView.vieworg, localViewOrigin );
// calculate the scissor as the intersection of the light and model rects
// this is used for light triangles, but not for shadow triangles
lightScissor = vLight->scissorRect;
lightScissor.Intersect( vEntity->scissorRect );
bool lightScissorsEmpty = lightScissor.IsEmpty();
// for each surface of this entity / light interaction
for ( int i = 0; i < numSurfaces; i++ ) {
surfaceInteraction_t *sint = &surfaces[i];
// see if the base surface is visible, we may still need to add shadows even if empty
if ( !lightScissorsEmpty && sint->ambientTris && sint->ambientTris->ambientViewCount == tr.viewCount ) {
// make sure we have created this interaction, which may have been deferred
// on a previous use that only needed the shadow
if ( sint->lightTris == LIGHT_TRIS_DEFERRED ) {
sint->lightTris = R_CreateLightTris( vEntity->entityDef, sint->ambientTris, vLight->lightDef, sint->shader, sint->cullInfo );
R_FreeInteractionCullInfo( sint->cullInfo );
}
srfTriangles_t *lightTris = sint->lightTris;
if ( lightTris ) {
// try to cull before adding
// FIXME: this may not be worthwhile. We have already done culling on the ambient,
// but individual surfaces may still be cropped somewhat more
if ( !R_CullLocalBox( lightTris->bounds, vEntity->modelMatrix, 5, tr.viewDef->frustum ) ) {
// make sure the original surface has its ambient cache created
srfTriangles_t *tri = sint->ambientTris;
if ( !tri->ambientCache ) {
if ( !R_CreateAmbientCache( tri, sint->shader->ReceivesLighting() ) ) {
// skip if we were out of vertex memory
continue;
}
}
// reference the original surface's ambient cache
lightTris->ambientCache = tri->ambientCache;
// touch the ambient surface so it won't get purged
vertexCache.Touch(lightTris->ambientCache);
if (!lightTris->indexCache) {
vertexCache.Alloc(lightTris->indexes, lightTris->numIndexes * sizeof(lightTris->indexes[0]), &lightTris->indexCache, true);
vertexCache.Touch(lightTris->indexCache);
}
// add the surface to the light list
const idMaterial *shader = sint->shader;
R_GlobalShaderOverride(&shader);
// there will only be localSurfaces if the light casts shadows and
// there are surfaces with NOSELFSHADOW
if ( sint->shader->Coverage() == MC_TRANSLUCENT ) {
R_LinkLightSurf( &vLight->translucentInteractions, lightTris,
vEntity, lightDef, shader, lightScissor, false );
} else if ( !lightDef->parms.noShadows && sint->shader->TestMaterialFlag(MF_NOSELFSHADOW) ) {
R_LinkLightSurf( &vLight->localInteractions, lightTris,
vEntity, lightDef, shader, lightScissor, false );
} else {
R_LinkLightSurf( &vLight->globalInteractions, lightTris,
vEntity, lightDef, shader, lightScissor, false );
}
}
}
}
srfTriangles_t *shadowTris = sint->shadowTris;
// the shadows will always have to be added, unless we can tell they
// are from a surface in an unconnected area
if ( shadowTris ) {
// check for view specific shadow suppression (player shadows, etc)
if ( !r_skipSuppress.GetBool() ) {
if ( entityDef->parms.suppressShadowInViewID &&
entityDef->parms.suppressShadowInViewID == tr.viewDef->renderView.viewID ) {
continue;
}
if ( entityDef->parms.suppressShadowInLightID &&
entityDef->parms.suppressShadowInLightID == lightDef->parms.lightId ) {
continue;
}
}
// cull static shadows that have a non-empty bounds
// dynamic shadows that use the turboshadow code will not have valid
// bounds, because the perspective projection extends them to infinity
if ( r_useShadowCulling.GetBool() && !shadowTris->bounds.IsCleared() ) {
if ( R_CullLocalBox( shadowTris->bounds, vEntity->modelMatrix, 5, tr.viewDef->frustum ) ) {
continue;
}
}
// copy the shadow vertexes to the vertex cache if they have been purged
// if we are using shared shadowVertexes and letting a vertex program fix them up,
// get the shadowCache from the parent ambient surface
if ( !shadowTris->shadowVertexes ) {
// the data may have been purged, so get the latest from the "home position"
shadowTris->shadowCache = sint->ambientTris->shadowCache;
}
// if we have been purged, re-upload the shadowVertexes
if ( !shadowTris->shadowCache ) {
if ( shadowTris->shadowVertexes ) {
// each interaction has unique vertexes
R_CreatePrivateShadowCache( shadowTris );
} else {
R_CreateVertexProgramShadowCache( sint->ambientTris );
shadowTris->shadowCache = sint->ambientTris->shadowCache;
}
// if we are out of vertex cache space, skip the interaction
if ( !shadowTris->shadowCache ) {
continue;
}
}
// touch the shadow surface so it won't get purged
vertexCache.Touch( shadowTris->shadowCache );
if ( !shadowTris->indexCache ) {
vertexCache.Alloc( shadowTris->indexes, shadowTris->numIndexes * sizeof( shadowTris->indexes[0] ), &shadowTris->indexCache, true );
vertexCache.Touch( shadowTris->indexCache );
}
// see if we can avoid using the shadow volume caps
bool inside = R_PotentiallyInsideInfiniteShadow( sint->ambientTris, localViewOrigin, localLightOrigin );
if ( sint->shader->TestMaterialFlag( MF_NOSELFSHADOW ) ) {
R_LinkLightSurf( &vLight->localShadows,
shadowTris, vEntity, lightDef, NULL, shadowScissor, inside );
} else {
R_LinkLightSurf( &vLight->globalShadows,
shadowTris, vEntity, lightDef, NULL, shadowScissor, inside );
}
}
}
}
/*
===================
R_AddSingleModel
May be run in parallel.
Here is where dynamic models actually get instantiated, and necessary
interaction surfaces get created. This is all done on a sort-by-model
basis to keep source data in cache (most likely L2) as any interactions
and shadows are generated, since dynamic models will typically be lit by
two or more lights.
===================
*/
void R_AddSingleModel( viewEntity_t* vEntity )
{
// we will add all interaction surfs here, to be chained to the lights in later serial code
vEntity->drawSurfs = NULL;
vEntity->staticShadowVolumes = NULL;
vEntity->dynamicShadowVolumes = NULL;
// globals we really should pass in...
const viewDef_t* viewDef = tr.viewDef;
idRenderEntityLocal* entityDef = vEntity->entityDef;
const renderEntity_t* renderEntity = &entityDef->parms;
const idRenderWorldLocal* world = entityDef->world;
if( viewDef->isXraySubview && entityDef->parms.xrayIndex == 1 )
{
return;
}
else if( !viewDef->isXraySubview && entityDef->parms.xrayIndex == 2 )
{
return;
}
SCOPED_PROFILE_EVENT( renderEntity->hModel == NULL ? "Unknown Model" : renderEntity->hModel->Name() );
// calculate the znear for testing whether or not the view is inside a shadow projection
const float znear = ( viewDef->renderView.cramZNear ) ? ( r_znear.GetFloat() * 0.25f ) : r_znear.GetFloat();
// if the entity wasn't seen through a portal chain, it was added just for light shadows
const bool modelIsVisible = !vEntity->scissorRect.IsEmpty();
const bool addInteractions = modelIsVisible && ( !viewDef->isXraySubview || entityDef->parms.xrayIndex == 2 );
const int entityIndex = entityDef->index;
//---------------------------
// Find which of the visible lights contact this entity
//
// If the entity doesn't accept light or cast shadows from any surface,
// this can be skipped.
//
// OPTIMIZE: world areas can assume all referenced lights are used
//---------------------------
int numContactedLights = 0;
static const int MAX_CONTACTED_LIGHTS = 128;
viewLight_t* contactedLights[MAX_CONTACTED_LIGHTS];
idInteraction* staticInteractions[MAX_CONTACTED_LIGHTS];
if( renderEntity->hModel == NULL ||
renderEntity->hModel->ModelHasInteractingSurfaces() ||
renderEntity->hModel->ModelHasShadowCastingSurfaces() )
{
SCOPED_PROFILE_EVENT( "Find lights" );
for( viewLight_t* vLight = viewDef->viewLights; vLight != NULL; vLight = vLight->next )
{
if( vLight->scissorRect.IsEmpty() )
{
continue;
}
if( vLight->entityInteractionState != NULL )
{
// new code path, everything was done in AddLight
if( vLight->entityInteractionState[entityIndex] == viewLight_t::INTERACTION_YES )
{
contactedLights[numContactedLights] = vLight;
staticInteractions[numContactedLights] = world->interactionTable[vLight->lightDef->index * world->interactionTableWidth + entityIndex];
if( ++numContactedLights == MAX_CONTACTED_LIGHTS )
{
break;
}
}
continue;
}
const idRenderLightLocal* lightDef = vLight->lightDef;
if( !lightDef->globalLightBounds.IntersectsBounds( entityDef->globalReferenceBounds ) )
{
continue;
}
if( R_CullModelBoundsToLight( lightDef, entityDef->localReferenceBounds, entityDef->modelRenderMatrix ) )
{
continue;
}
if( !modelIsVisible )
{
// some lights have their center of projection outside the world
if( lightDef->areaNum != -1 )
{
// if no part of the model is in an area that is connected to
// the light center (it is behind a solid, closed door), we can ignore it
bool areasConnected = false;
for( areaReference_t* ref = entityDef->entityRefs; ref != NULL; ref = ref->ownerNext )
{
if( world->AreasAreConnected( lightDef->areaNum, ref->area->areaNum, PS_BLOCK_VIEW ) )
{
areasConnected = true;
break;
}
}
if( areasConnected == false )
{
// can't possibly be seen or shadowed
continue;
}
}
// check more precisely for shadow visibility
idBounds shadowBounds;
R_ShadowBounds( entityDef->globalReferenceBounds, lightDef->globalLightBounds, lightDef->globalLightOrigin, shadowBounds );
// this doesn't say that the shadow can't effect anything, only that it can't
// effect anything in the view
if( idRenderMatrix::CullBoundsToMVP( viewDef->worldSpace.mvp, shadowBounds ) )
{
continue;
}
}
contactedLights[numContactedLights] = vLight;
staticInteractions[numContactedLights] = world->interactionTable[vLight->lightDef->index * world->interactionTableWidth + entityIndex];
if( ++numContactedLights == MAX_CONTACTED_LIGHTS )
{
break;
}
}
}
// if we aren't visible and none of the shadows stretch into the view,
// we don't need to do anything else
if( !modelIsVisible && numContactedLights == 0 )
{
return;
}
//---------------------------
// create a dynamic model if the geometry isn't static
//---------------------------
idRenderModel* model = R_EntityDefDynamicModel( entityDef );
if( model == NULL || model->NumSurfaces() <= 0 )
{
return;
}
// add the lightweight blood decal surfaces if the model is directly visible
if( modelIsVisible )
{
assert( !vEntity->scissorRect.IsEmpty() );
if( entityDef->decals != NULL && !r_skipDecals.GetBool() )
{
entityDef->decals->CreateDeferredDecals( model );
unsigned int numDrawSurfs = entityDef->decals->GetNumDecalDrawSurfs();
for( unsigned int i = 0; i < numDrawSurfs; i++ )
{
drawSurf_t* decalDrawSurf = entityDef->decals->CreateDecalDrawSurf( vEntity, i );
if( decalDrawSurf != NULL )
{
decalDrawSurf->linkChain = NULL;
decalDrawSurf->nextOnLight = vEntity->drawSurfs;
vEntity->drawSurfs = decalDrawSurf;
}
}
}
if( entityDef->overlays != NULL && !r_skipOverlays.GetBool() )
{
entityDef->overlays->CreateDeferredOverlays( model );
unsigned int numDrawSurfs = entityDef->overlays->GetNumOverlayDrawSurfs();
for( unsigned int i = 0; i < numDrawSurfs; i++ )
{
drawSurf_t* overlayDrawSurf = entityDef->overlays->CreateOverlayDrawSurf( vEntity, model, i );
if( overlayDrawSurf != NULL )
{
overlayDrawSurf->linkChain = NULL;
overlayDrawSurf->nextOnLight = vEntity->drawSurfs;
vEntity->drawSurfs = overlayDrawSurf;
}
}
}
}
//---------------------------
// copy matrix related stuff for back-end use
// and setup a render matrix for faster culling
//---------------------------
vEntity->modelDepthHack = renderEntity->modelDepthHack;
vEntity->weaponDepthHack = renderEntity->weaponDepthHack;
vEntity->skipMotionBlur = renderEntity->skipMotionBlur;
memcpy( vEntity->modelMatrix, entityDef->modelMatrix, sizeof( vEntity->modelMatrix ) );
R_MatrixMultiply( entityDef->modelMatrix, viewDef->worldSpace.modelViewMatrix, vEntity->modelViewMatrix );
idRenderMatrix viewMat;
idRenderMatrix::Transpose( *( idRenderMatrix* )vEntity->modelViewMatrix, viewMat );
idRenderMatrix::Multiply( viewDef->projectionRenderMatrix, viewMat, vEntity->mvp );
if( renderEntity->weaponDepthHack )
{
idRenderMatrix::ApplyDepthHack( vEntity->mvp );
}
if( renderEntity->modelDepthHack != 0.0f )
{
idRenderMatrix::ApplyModelDepthHack( vEntity->mvp, renderEntity->modelDepthHack );
}
// local light and view origins are used to determine if the view is definitely outside
// an extruded shadow volume, which means we can skip drawing the end caps
idVec3 localViewOrigin;
R_GlobalPointToLocal( vEntity->modelMatrix, viewDef->renderView.vieworg, localViewOrigin );
//---------------------------
// add all the model surfaces
//---------------------------
for( int surfaceNum = 0; surfaceNum < model->NumSurfaces(); surfaceNum++ )
{
const modelSurface_t* surf = model->Surface( surfaceNum );
// for debugging, only show a single surface at a time
if( r_singleSurface.GetInteger() >= 0 && surfaceNum != r_singleSurface.GetInteger() )
{
continue;
}
srfTriangles_t* tri = surf->geometry;
if( tri == NULL )
{
continue;
}
if( tri->numIndexes == 0 )
{
continue; // happens for particles
}
const idMaterial* shader = surf->shader;
if( shader == NULL )
{
continue;
}
if( !shader->IsDrawn() )
{
continue; // collision hulls, etc
}
// RemapShaderBySkin
if( entityDef->parms.customShader != NULL )
{
// this is sort of a hack, but causes deformed surfaces to map to empty surfaces,
// so the item highlight overlay doesn't highlight the autosprite surface
if( shader->Deform() )
{
continue;
}
shader = entityDef->parms.customShader;
}
else if( entityDef->parms.customSkin )
{
shader = entityDef->parms.customSkin->RemapShaderBySkin( shader );
if( shader == NULL )
{
continue;
}
if( !shader->IsDrawn() )
{
continue;
}
}
// optionally override with the renderView->globalMaterial
if( tr.primaryRenderView.globalMaterial != NULL )
{
shader = tr.primaryRenderView.globalMaterial;
}
SCOPED_PROFILE_EVENT( shader->GetName() );
// debugging tool to make sure we have the correct pre-calculated bounds
if( r_checkBounds.GetBool() )
{
for( int j = 0; j < tri->numVerts; j++ )
{
int k;
for( k = 0; k < 3; k++ )
{
if( tri->verts[j].xyz[k] > tri->bounds[1][k] + CHECK_BOUNDS_EPSILON
|| tri->verts[j].xyz[k] < tri->bounds[0][k] - CHECK_BOUNDS_EPSILON )
{
common->Printf( "bad tri->bounds on %s:%s\n", entityDef->parms.hModel->Name(), shader->GetName() );
break;
}
if( tri->verts[j].xyz[k] > entityDef->localReferenceBounds[1][k] + CHECK_BOUNDS_EPSILON
|| tri->verts[j].xyz[k] < entityDef->localReferenceBounds[0][k] - CHECK_BOUNDS_EPSILON )
{
common->Printf( "bad referenceBounds on %s:%s\n", entityDef->parms.hModel->Name(), shader->GetName() );
break;
}
}
if( k != 3 )
{
break;
}
}
}
// view frustum culling for the precise surface bounds, which is tighter
// than the entire entity reference bounds
// If the entire model wasn't visible, there is no need to check the
// individual surfaces.
const bool surfaceDirectlyVisible = modelIsVisible && !idRenderMatrix::CullBoundsToMVP( vEntity->mvp, tri->bounds );
// RB: added check wether GPU skinning is available at all
const bool gpuSkinned = ( tri->staticModelWithJoints != NULL && r_useGPUSkinning.GetBool() && glConfig.gpuSkinningAvailable );
// RB end
//--------------------------
// base drawing surface
//--------------------------
drawSurf_t* baseDrawSurf = NULL;
if( surfaceDirectlyVisible )
{
// make sure we have an ambient cache and all necessary normals / tangents
if( !vertexCache.CacheIsCurrent( tri->indexCache ) )
{
tri->indexCache = vertexCache.AllocIndex( tri->indexes, ALIGN( tri->numIndexes * sizeof( triIndex_t ), INDEX_CACHE_ALIGN ) );
}
if( !vertexCache.CacheIsCurrent( tri->ambientCache ) )
{
// we are going to use it for drawing, so make sure we have the tangents and normals
if( shader->ReceivesLighting() && !tri->tangentsCalculated )
{
assert( tri->staticModelWithJoints == NULL );
R_DeriveTangents( tri );
// RB: this was hit by parametric particle models ..
//assert( false ); // this should no longer be hit
// RB end
}
tri->ambientCache = vertexCache.AllocVertex( tri->verts, ALIGN( tri->numVerts * sizeof( idDrawVert ), VERTEX_CACHE_ALIGN ) );
}
// add the surface for drawing
// we can re-use some of the values for light interaction surfaces
baseDrawSurf = ( drawSurf_t* )R_FrameAlloc( sizeof( *baseDrawSurf ), FRAME_ALLOC_DRAW_SURFACE );
baseDrawSurf->frontEndGeo = tri;
baseDrawSurf->space = vEntity;
baseDrawSurf->scissorRect = vEntity->scissorRect;
baseDrawSurf->extraGLState = 0;
baseDrawSurf->renderZFail = 0;
R_SetupDrawSurfShader( baseDrawSurf, shader, renderEntity );
// Check for deformations (eyeballs, flares, etc)
const deform_t shaderDeform = shader->Deform();
if( shaderDeform != DFRM_NONE )
{
drawSurf_t* deformDrawSurf = R_DeformDrawSurf( baseDrawSurf );
if( deformDrawSurf != NULL )
{
// any deforms may have created multiple draw surfaces
for( drawSurf_t* surf = deformDrawSurf, * next = NULL; surf != NULL; surf = next )
{
next = surf->nextOnLight;
surf->linkChain = NULL;
surf->nextOnLight = vEntity->drawSurfs;
vEntity->drawSurfs = surf;
}
}
}
// Most deform source surfaces do not need to be rendered.
// However, particles are rendered in conjunction with the source surface.
if( shaderDeform == DFRM_NONE || shaderDeform == DFRM_PARTICLE || shaderDeform == DFRM_PARTICLE2 )
{
// copy verts and indexes to this frame's hardware memory if they aren't already there
if( !vertexCache.CacheIsCurrent( tri->ambientCache ) )
{
tri->ambientCache = vertexCache.AllocVertex( tri->verts, ALIGN( tri->numVerts * sizeof( tri->verts[0] ), VERTEX_CACHE_ALIGN ) );
}
if( !vertexCache.CacheIsCurrent( tri->indexCache ) )
{
tri->indexCache = vertexCache.AllocIndex( tri->indexes, ALIGN( tri->numIndexes * sizeof( tri->indexes[0] ), INDEX_CACHE_ALIGN ) );
}
R_SetupDrawSurfJoints( baseDrawSurf, tri, shader );
baseDrawSurf->numIndexes = tri->numIndexes;
baseDrawSurf->ambientCache = tri->ambientCache;
baseDrawSurf->indexCache = tri->indexCache;
baseDrawSurf->shadowCache = 0;
baseDrawSurf->linkChain = NULL; // link to the view
baseDrawSurf->nextOnLight = vEntity->drawSurfs;
vEntity->drawSurfs = baseDrawSurf;
}
}
//----------------------------------------
// add all light interactions
//----------------------------------------
for( int contactedLight = 0; contactedLight < numContactedLights; contactedLight++ )
{
viewLight_t* vLight = contactedLights[contactedLight];
const idRenderLightLocal* lightDef = vLight->lightDef;
const idInteraction* interaction = staticInteractions[contactedLight];
// check for a static interaction
surfaceInteraction_t* surfInter = NULL;
if( interaction > INTERACTION_EMPTY && interaction->staticInteraction )
{
// we have a static interaction that was calculated accurately
assert( model->NumSurfaces() == interaction->numSurfaces );
surfInter = &interaction->surfaces[surfaceNum];
}
else
{
// try to do a more precise cull of this model surface to the light
if( R_CullModelBoundsToLight( lightDef, tri->bounds, entityDef->modelRenderMatrix ) )
{
continue;
}
}
// "invisible ink" lights and shaders (imp spawn drawing on walls, etc)
if( shader->Spectrum() != lightDef->lightShader->Spectrum() )
{
continue;
}
// Calculate the local light origin to determine if the view is inside the shadow
// projection and to calculate the triangle facing for dynamic shadow volumes.
idVec3 localLightOrigin;
R_GlobalPointToLocal( vEntity->modelMatrix, lightDef->globalLightOrigin, localLightOrigin );
//--------------------------
// surface light interactions
//--------------------------
dynamicShadowVolumeParms_t* dynamicShadowParms = NULL;
if( addInteractions && surfaceDirectlyVisible && shader->ReceivesLighting() )
{
// static interactions can commonly find that no triangles from a surface
// contact the light, even when the total model does
if( surfInter == NULL || surfInter->lightTrisIndexCache > 0 )
{
// create a drawSurf for this interaction
drawSurf_t* lightDrawSurf = ( drawSurf_t* )R_FrameAlloc( sizeof( *lightDrawSurf ), FRAME_ALLOC_DRAW_SURFACE );
if( surfInter != NULL )
{
// optimized static interaction
lightDrawSurf->numIndexes = surfInter->numLightTrisIndexes;
lightDrawSurf->indexCache = surfInter->lightTrisIndexCache;
}
else
{
// throw the entire source surface at it without any per-triangle culling
lightDrawSurf->numIndexes = tri->numIndexes;
lightDrawSurf->indexCache = tri->indexCache;
// optionally cull the triangles to the light volume
if( r_cullDynamicLightTriangles.GetBool() )
{
vertCacheHandle_t lightIndexCache = vertexCache.AllocIndex( NULL, ALIGN( lightDrawSurf->numIndexes * sizeof( triIndex_t ), INDEX_CACHE_ALIGN ) );
if( vertexCache.CacheIsCurrent( lightIndexCache ) )
{
lightDrawSurf->indexCache = lightIndexCache;
dynamicShadowParms = ( dynamicShadowVolumeParms_t* )R_FrameAlloc( sizeof( dynamicShadowParms[0] ), FRAME_ALLOC_SHADOW_VOLUME_PARMS );
dynamicShadowParms->verts = tri->verts;
dynamicShadowParms->numVerts = tri->numVerts;
dynamicShadowParms->indexes = tri->indexes;
dynamicShadowParms->numIndexes = tri->numIndexes;
dynamicShadowParms->silEdges = tri->silEdges;
dynamicShadowParms->numSilEdges = tri->numSilEdges;
dynamicShadowParms->joints = gpuSkinned ? tri->staticModelWithJoints->jointsInverted : NULL;
dynamicShadowParms->numJoints = gpuSkinned ? tri->staticModelWithJoints->numInvertedJoints : 0;
dynamicShadowParms->triangleBounds = tri->bounds;
dynamicShadowParms->triangleMVP = vEntity->mvp;
dynamicShadowParms->localLightOrigin = localLightOrigin;
dynamicShadowParms->localViewOrigin = localViewOrigin;
idRenderMatrix::Multiply( vLight->lightDef->baseLightProject, entityDef->modelRenderMatrix, dynamicShadowParms->localLightProject );
dynamicShadowParms->zNear = znear;
dynamicShadowParms->lightZMin = vLight->scissorRect.zmin;
dynamicShadowParms->lightZMax = vLight->scissorRect.zmax;
dynamicShadowParms->cullShadowTrianglesToLight = false;
dynamicShadowParms->forceShadowCaps = false;
dynamicShadowParms->useShadowPreciseInsideTest = false;
dynamicShadowParms->useShadowDepthBounds = false;
dynamicShadowParms->tempFacing = NULL;
dynamicShadowParms->tempCulled = NULL;
dynamicShadowParms->tempVerts = NULL;
dynamicShadowParms->indexBuffer = NULL;
dynamicShadowParms->shadowIndices = NULL;
dynamicShadowParms->maxShadowIndices = 0;
dynamicShadowParms->numShadowIndices = NULL;
dynamicShadowParms->lightIndices = ( triIndex_t* )vertexCache.MappedIndexBuffer( lightIndexCache );
dynamicShadowParms->maxLightIndices = lightDrawSurf->numIndexes;
dynamicShadowParms->numLightIndices = &lightDrawSurf->numIndexes;
dynamicShadowParms->renderZFail = NULL;
dynamicShadowParms->shadowZMin = NULL;
dynamicShadowParms->shadowZMax = NULL;
dynamicShadowParms->shadowVolumeState = & lightDrawSurf->shadowVolumeState;
lightDrawSurf->shadowVolumeState = SHADOWVOLUME_UNFINISHED;
dynamicShadowParms->next = vEntity->dynamicShadowVolumes;
vEntity->dynamicShadowVolumes = dynamicShadowParms;
}
}
}
lightDrawSurf->ambientCache = tri->ambientCache;
lightDrawSurf->shadowCache = 0;
lightDrawSurf->frontEndGeo = tri;
lightDrawSurf->space = vEntity;
lightDrawSurf->material = shader;
lightDrawSurf->extraGLState = 0;
lightDrawSurf->scissorRect = vLight->scissorRect; // interactionScissor;
lightDrawSurf->sort = 0.0f;
lightDrawSurf->renderZFail = 0;
lightDrawSurf->shaderRegisters = baseDrawSurf->shaderRegisters;
R_SetupDrawSurfJoints( lightDrawSurf, tri, shader );
// Determine which linked list to add the light surface to.
// There will only be localSurfaces if the light casts shadows and
// there are surfaces with NOSELFSHADOW.
if( shader->Coverage() == MC_TRANSLUCENT )
{
lightDrawSurf->linkChain = &vLight->translucentInteractions;
}
else if( !lightDef->parms.noShadows && shader->TestMaterialFlag( MF_NOSELFSHADOW ) )
{
lightDrawSurf->linkChain = &vLight->localInteractions;
}
else
{
lightDrawSurf->linkChain = &vLight->globalInteractions;
}
lightDrawSurf->nextOnLight = vEntity->drawSurfs;
vEntity->drawSurfs = lightDrawSurf;
}
}
//--------------------------
// surface shadows
//--------------------------
if( !shader->SurfaceCastsShadow() )
{
continue;
}
if( !lightDef->LightCastsShadows() )
{
continue;
}
if( tri->silEdges == NULL )
{
continue; // can happen for beam models (shouldn't use a shadow casting material, though...)
}
// if the static shadow does not have any shadows
if( surfInter != NULL && surfInter->numShadowIndexes == 0 )
{
continue;
}
// some entities, like view weapons, don't cast any shadows
if( entityDef->parms.noShadow )
{
continue;
}
// No shadow if it's suppressed for this light.
if( entityDef->parms.suppressShadowInLightID && entityDef->parms.suppressShadowInLightID == lightDef->parms.lightId )
{
continue;
}
if( lightDef->parms.prelightModel && lightDef->lightHasMoved == false &&
entityDef->parms.hModel->IsStaticWorldModel() && !r_skipPrelightShadows.GetBool() )
{
// static light / world model shadow interacitons
// are always captured in the prelight shadow volume
continue;
}
// If the shadow is drawn (or translucent), but the model isn't, we must include the shadow caps
// because we may be able to see into the shadow volume even though the view is outside it.
// This happens for the player world weapon and possibly some animations in multiplayer.
const bool forceShadowCaps = !addInteractions || r_forceShadowCaps.GetBool();
drawSurf_t* shadowDrawSurf = ( drawSurf_t* )R_FrameAlloc( sizeof( *shadowDrawSurf ), FRAME_ALLOC_DRAW_SURFACE );
if( surfInter != NULL )
{
shadowDrawSurf->numIndexes = 0;
shadowDrawSurf->indexCache = surfInter->shadowIndexCache;
shadowDrawSurf->shadowCache = tri->shadowCache;
shadowDrawSurf->scissorRect = vLight->scissorRect; // default to the light scissor and light depth bounds
shadowDrawSurf->shadowVolumeState = SHADOWVOLUME_DONE; // assume the shadow volume is done in case r_skipStaticShadows is set
if( !r_skipStaticShadows.GetBool() )
{
staticShadowVolumeParms_t* staticShadowParms = ( staticShadowVolumeParms_t* )R_FrameAlloc( sizeof( staticShadowParms[0] ), FRAME_ALLOC_SHADOW_VOLUME_PARMS );
staticShadowParms->verts = tri->staticShadowVertexes;
staticShadowParms->numVerts = tri->numVerts * 2;
staticShadowParms->indexes = surfInter->shadowIndexes;
staticShadowParms->numIndexes = surfInter->numShadowIndexes;
staticShadowParms->numShadowIndicesWithCaps = surfInter->numShadowIndexes;
staticShadowParms->numShadowIndicesNoCaps = surfInter->numShadowIndexesNoCaps;
staticShadowParms->triangleBounds = tri->bounds;
staticShadowParms->triangleMVP = vEntity->mvp;
staticShadowParms->localLightOrigin = localLightOrigin;
staticShadowParms->localViewOrigin = localViewOrigin;
staticShadowParms->zNear = znear;
staticShadowParms->lightZMin = vLight->scissorRect.zmin;
staticShadowParms->lightZMax = vLight->scissorRect.zmax;
staticShadowParms->forceShadowCaps = forceShadowCaps;
staticShadowParms->useShadowPreciseInsideTest = r_useShadowPreciseInsideTest.GetBool();
staticShadowParms->useShadowDepthBounds = r_useShadowDepthBounds.GetBool();
staticShadowParms->numShadowIndices = & shadowDrawSurf->numIndexes;
staticShadowParms->renderZFail = & shadowDrawSurf->renderZFail;
staticShadowParms->shadowZMin = & shadowDrawSurf->scissorRect.zmin;
staticShadowParms->shadowZMax = & shadowDrawSurf->scissorRect.zmax;
staticShadowParms->shadowVolumeState = & shadowDrawSurf->shadowVolumeState;
shadowDrawSurf->shadowVolumeState = SHADOWVOLUME_UNFINISHED;
staticShadowParms->next = vEntity->staticShadowVolumes;
vEntity->staticShadowVolumes = staticShadowParms;
}
}
else
{
// When CPU skinning the dynamic shadow verts of a dynamic model may not have been copied to buffer memory yet.
if( !vertexCache.CacheIsCurrent( tri->shadowCache ) )
{
assert( !gpuSkinned ); // the shadow cache should be static when using GPU skinning
// Extracts just the xyz values from a set of full size drawverts, and
// duplicates them with w set to 0 and 1 for the vertex program to project.
// This is constant for any number of lights, the vertex program takes care
// of projecting the verts to infinity for a particular light.
tri->shadowCache = vertexCache.AllocVertex( NULL, ALIGN( tri->numVerts * 2 * sizeof( idShadowVert ), VERTEX_CACHE_ALIGN ) );
idShadowVert* shadowVerts = ( idShadowVert* )vertexCache.MappedVertexBuffer( tri->shadowCache );
idShadowVert::CreateShadowCache( shadowVerts, tri->verts, tri->numVerts );
}
const int maxShadowVolumeIndexes = tri->numSilEdges * 6 + tri->numIndexes * 2;
shadowDrawSurf->numIndexes = 0;
shadowDrawSurf->indexCache = vertexCache.AllocIndex( NULL, ALIGN( maxShadowVolumeIndexes * sizeof( triIndex_t ), INDEX_CACHE_ALIGN ) );
shadowDrawSurf->shadowCache = tri->shadowCache;
shadowDrawSurf->scissorRect = vLight->scissorRect; // default to the light scissor and light depth bounds
shadowDrawSurf->shadowVolumeState = SHADOWVOLUME_DONE; // assume the shadow volume is done in case the index cache allocation failed
// if the index cache was successfully allocated then setup the parms to create a shadow volume in parallel
if( vertexCache.CacheIsCurrent( shadowDrawSurf->indexCache ) && !r_skipDynamicShadows.GetBool() )
{
// if the parms were not already allocated for culling interaction triangles to the light frustum
if( dynamicShadowParms == NULL )
{
dynamicShadowParms = ( dynamicShadowVolumeParms_t* )R_FrameAlloc( sizeof( dynamicShadowParms[0] ), FRAME_ALLOC_SHADOW_VOLUME_PARMS );
}
else
{
// the shadow volume will be rendered first so when the interaction surface is drawn the triangles have been culled for sure
*dynamicShadowParms->shadowVolumeState = SHADOWVOLUME_DONE;
}
dynamicShadowParms->verts = tri->verts;
dynamicShadowParms->numVerts = tri->numVerts;
dynamicShadowParms->indexes = tri->indexes;
dynamicShadowParms->numIndexes = tri->numIndexes;
dynamicShadowParms->silEdges = tri->silEdges;
dynamicShadowParms->numSilEdges = tri->numSilEdges;
dynamicShadowParms->joints = gpuSkinned ? tri->staticModelWithJoints->jointsInverted : NULL;
dynamicShadowParms->numJoints = gpuSkinned ? tri->staticModelWithJoints->numInvertedJoints : 0;
dynamicShadowParms->triangleBounds = tri->bounds;
dynamicShadowParms->triangleMVP = vEntity->mvp;
dynamicShadowParms->localLightOrigin = localLightOrigin;
dynamicShadowParms->localViewOrigin = localViewOrigin;
idRenderMatrix::Multiply( vLight->lightDef->baseLightProject, entityDef->modelRenderMatrix, dynamicShadowParms->localLightProject );
dynamicShadowParms->zNear = znear;
dynamicShadowParms->lightZMin = vLight->scissorRect.zmin;
dynamicShadowParms->lightZMax = vLight->scissorRect.zmax;
dynamicShadowParms->cullShadowTrianglesToLight = r_cullDynamicShadowTriangles.GetBool();
dynamicShadowParms->forceShadowCaps = forceShadowCaps;
dynamicShadowParms->useShadowPreciseInsideTest = r_useShadowPreciseInsideTest.GetBool();
dynamicShadowParms->useShadowDepthBounds = r_useShadowDepthBounds.GetBool();
dynamicShadowParms->tempFacing = NULL;
dynamicShadowParms->tempCulled = NULL;
dynamicShadowParms->tempVerts = NULL;
dynamicShadowParms->indexBuffer = NULL;
dynamicShadowParms->shadowIndices = ( triIndex_t* )vertexCache.MappedIndexBuffer( shadowDrawSurf->indexCache );
dynamicShadowParms->maxShadowIndices = maxShadowVolumeIndexes;
dynamicShadowParms->numShadowIndices = & shadowDrawSurf->numIndexes;
// dynamicShadowParms->lightIndices may have already been set for the interaction surface
// dynamicShadowParms->maxLightIndices may have already been set for the interaction surface
// dynamicShadowParms->numLightIndices may have already been set for the interaction surface
dynamicShadowParms->renderZFail = & shadowDrawSurf->renderZFail;
dynamicShadowParms->shadowZMin = & shadowDrawSurf->scissorRect.zmin;
dynamicShadowParms->shadowZMax = & shadowDrawSurf->scissorRect.zmax;
dynamicShadowParms->shadowVolumeState = & shadowDrawSurf->shadowVolumeState;
shadowDrawSurf->shadowVolumeState = SHADOWVOLUME_UNFINISHED;
// if the parms we not already linked for culling interaction triangles to the light frustum
if( dynamicShadowParms->lightIndices == NULL )
{
dynamicShadowParms->next = vEntity->dynamicShadowVolumes;
vEntity->dynamicShadowVolumes = dynamicShadowParms;
}
tr.pc.c_createShadowVolumes++;
}
}
assert( vertexCache.CacheIsCurrent( shadowDrawSurf->shadowCache ) );
assert( vertexCache.CacheIsCurrent( shadowDrawSurf->indexCache ) );
shadowDrawSurf->ambientCache = 0;
shadowDrawSurf->frontEndGeo = NULL;
shadowDrawSurf->space = vEntity;
shadowDrawSurf->material = NULL;
shadowDrawSurf->extraGLState = 0;
shadowDrawSurf->sort = 0.0f;
shadowDrawSurf->shaderRegisters = NULL;
R_SetupDrawSurfJoints( shadowDrawSurf, tri, NULL );
// determine which linked list to add the shadow surface to
shadowDrawSurf->linkChain = shader->TestMaterialFlag( MF_NOSELFSHADOW ) ? &vLight->localShadows : &vLight->globalShadows;
shadowDrawSurf->nextOnLight = vEntity->drawSurfs;
vEntity->drawSurfs = shadowDrawSurf;
}
}
}
