void PCB_EDIT_FRAME::ShowDesignRulesEditor( wxCommandEvent& event )
{
DIALOG_DESIGN_RULES dR_editor( this );
int returncode = dR_editor.ShowModal();
if( returncode == wxID_OK ) // New rules, or others changes.
{
ReCreateLayerBox();
ReCreateAuxiliaryToolbar();
OnModify();
}
}
void PCB_EDIT_FRAME::ShowDesignRulesEditor( wxCommandEvent& event )
{
DIALOG_DESIGN_RULES dR_editor( this );
int returncode = dR_editor.ShowModal();
if( returncode == wxID_OK ) // New rules, or others changes.
{
ReCreateLayerBox();
updateTraceWidthSelectBox();
updateViaSizeSelectBox();
OnModify();
}
}
void PCB_EDIT_FRAME::Process_Config( wxCommandEvent& event )
{
int id = event.GetId();
wxFileName fn;
switch( id )
{
case ID_MENU_PCB_SHOW_HIDE_LAYERS_MANAGER_DIALOG:
m_show_layer_manager_tools = ! m_show_layer_manager_tools;
m_auimgr.GetPane( wxT( "m_LayersManagerToolBar" ) ).Show( m_show_layer_manager_tools );
m_auimgr.Update();
GetMenuBar()->SetLabel( ID_MENU_PCB_SHOW_HIDE_LAYERS_MANAGER_DIALOG,
m_show_layer_manager_tools ?
_("Hide &Layers Manager" ) : _("Show &Layers Manager" ));
break;
case ID_MENU_PCB_SHOW_HIDE_MUWAVE_TOOLBAR:
m_show_microwave_tools = ! m_show_microwave_tools;
m_auimgr.GetPane( wxT( "m_microWaveToolBar" ) ).Show( m_show_microwave_tools );
m_auimgr.Update();
GetMenuBar()->SetLabel( ID_MENU_PCB_SHOW_HIDE_MUWAVE_TOOLBAR,
m_show_microwave_tools ?
_( "Hide Microwave Toolbar" ): _( "Show Microwave Toolbar" ));
break;
case ID_PCB_LAYERS_SETUP:
if( InvokeLayerSetup( this, GetBoard() ) )
{
LAYER_ID cur_layer = GetActiveLayer();
// If after showing the dialog the user has removed the active layer,
// then select a new active layer (front copper layer).
if( !GetBoard()->GetEnabledLayers()[ cur_layer ] )
cur_layer = F_Cu;
SetActiveLayer( cur_layer );
OnModify();
ReCreateLayerBox();
ReFillLayerWidget();
if( IsGalCanvasActive() )
static_cast<PCB_DRAW_PANEL_GAL*>( GetGalCanvas() )->SyncLayersVisibility( GetBoard() );
}
break;
case ID_PCB_LIB_WIZARD:
case ID_PCB_LIB_TABLE_EDIT:
{
bool tableChanged = false;
int r = 0;
if( id == ID_PCB_LIB_TABLE_EDIT )
r = InvokePcbLibTableEditor( this, &GFootprintTable, Prj().PcbFootprintLibs() );
else
r = InvokeFootprintWizard( this, &GFootprintTable, Prj().PcbFootprintLibs() );
if( r & 1 )
{
try
{
FILE_OUTPUTFORMATTER sf( FP_LIB_TABLE::GetGlobalTableFileName() );
GFootprintTable.Format( &sf, 0 );
tableChanged = true;
}
catch( const IO_ERROR& ioe )
{
wxString msg = wxString::Format( _(
"Error occurred saving the global footprint library "
"table:\n\n%s" ),
GetChars( ioe.errorText.GetData() )
);
wxMessageBox( msg, _( "File Save Error" ), wxOK | wxICON_ERROR );
}
}
// If no board file is defined, do not save the project specific library table. It
// is kept in memory and created in the path when the new board is saved.
if( (r & 2) && !GetBoard()->GetFileName().IsEmpty() )
{
wxString tblName = Prj().FootprintLibTblName();
try
{
Prj().PcbFootprintLibs()->Save( tblName );
tableChanged = true;
}
catch( const IO_ERROR& ioe )
{
wxString msg = wxString::Format( _(
"Error occurred saving project specific footprint library "
"table:\n\n%s" ),
GetChars( ioe.errorText )
);
wxMessageBox( msg, _( "File Save Error" ), wxOK | wxICON_ERROR );
}
}
FOOTPRINT_VIEWER_FRAME* viewer;
if( tableChanged && (viewer = (FOOTPRINT_VIEWER_FRAME*)Kiway().Player( FRAME_PCB_MODULE_VIEWER, false )) != NULL )
{
viewer->ReCreateLibraryList();
}
}
break;
case ID_PCB_3DSHAPELIB_WIZARD:
#ifdef BUILD_GITHUB_PLUGIN
Invoke3DShapeLibsDownloaderWizard( this );
#endif
break;
case ID_PCB_MASK_CLEARANCE:
{
DIALOG_PADS_MASK_CLEARANCE dlg( this );
if( dlg.ShowModal() == 1 && IsGalCanvasActive() )
{
for( MODULE* module = GetBoard()->m_Modules; module; module = module->Next() )
module->ViewUpdate();
GetGalCanvas()->Refresh();
}
}
break;
case wxID_PREFERENCES:
{
DIALOG_GENERALOPTIONS dlg( this );
dlg.ShowModal();
}
break;
case ID_PCB_PAD_SETUP:
InstallPadOptionsFrame( NULL );
break;
case ID_CONFIG_SAVE:
SaveProjectSettings( true );
break;
case ID_CONFIG_READ:
{
fn = GetBoard()->GetFileName();
fn.SetExt( ProjectFileExtension );
wxFileDialog dlg( this, _( "Read Project File" ), fn.GetPath(),
fn.GetFullName(), ProjectFileWildcard,
wxFD_OPEN | wxFD_FILE_MUST_EXIST | wxFD_CHANGE_DIR );
if( dlg.ShowModal() == wxID_CANCEL )
break;
if( !wxFileExists( dlg.GetPath() ) )
{
wxString msg = wxString::Format( _(
"File %s not found" ),
GetChars( dlg.GetPath() )
);
DisplayError( this, msg );
break;
}
wxString pro_file = dlg.GetPath();
Prj().ConfigLoad( Kiface().KifaceSearch(), GROUP_PCB, GetProjectFileParameters(), pro_file );
}
break;
// Hotkey IDs
case ID_PREFERENCES_HOTKEY_EXPORT_CONFIG:
ExportHotkeyConfigToFile( g_Board_Editor_Hokeys_Descr, wxT( "pcbnew" ) );
break;
case ID_PREFERENCES_HOTKEY_IMPORT_CONFIG:
ImportHotkeyConfigFromFile( g_Board_Editor_Hokeys_Descr, wxT( "pcbnew" ) );
break;
case ID_PREFERENCES_HOTKEY_SHOW_EDITOR:
InstallHotkeyFrame( this, g_Board_Editor_Hokeys_Descr );
break;
case ID_PREFERENCES_HOTKEY_SHOW_CURRENT_LIST:
// Display current hotkey list for Pcbnew.
DisplayHotkeyList( this, g_Board_Editor_Hokeys_Descr );
break;
default:
DisplayError( this, wxT( "PCB_EDIT_FRAME::Process_Config error" ) );
}
}
bool PCB_EDIT_FRAME::OpenProjectFiles( const std::vector<wxString>& aFileSet, int aCtl )
{
// This is for python:
if( aFileSet.size() != 1 )
{
UTF8 msg = StrPrintf( "Pcbnew:%s() takes only a single filename", __func__ );
DisplayError( this, msg );
return false;
}
wxString fullFileName( aFileSet[0] );
// We insist on caller sending us an absolute path, if it does not, we say it's a bug.
wxASSERT_MSG( wxFileName( fullFileName ).IsAbsolute(),
wxT( "bug in single_top.cpp or project manager." ) );
if( !LockFile( fullFileName ) )
{
wxString msg = wxString::Format( _(
"PCB file '%s' is already open." ),
GetChars( fullFileName )
);
DisplayError( this, msg );
return false;
}
if( GetScreen()->IsModify() )
{
int response = YesNoCancelDialog( this, _(
"The current board has been modified. Do you wish to save the changes?" ),
wxEmptyString,
_( "Save and Load" ),
_( "Load Without Saving" )
);
if( response == wxID_CANCEL )
return false;
else if( response == wxID_YES )
SavePcbFile( GetBoard()->GetFileName(), CREATE_BACKUP_FILE );
else
{
// response == wxID_NO, fall thru
}
}
wxFileName pro = fullFileName;
pro.SetExt( ProjectFileExtension );
bool is_new = !wxFileName::IsFileReadable( fullFileName );
// If its a non-existent schematic and caller thinks it exists
if( is_new && !( aCtl & KICTL_CREATE ) )
{
// notify user that fullFileName does not exist, ask if user wants to create it.
wxString ask = wxString::Format( _(
"Board '%s' does not exist. Do you wish to create it?" ),
GetChars( fullFileName )
);
if( !IsOK( this, ask ) )
return false;
}
Clear_Pcb( false ); // pass false since we prompted above for a modified board
IO_MGR::PCB_FILE_T pluginType = plugin_type( fullFileName, aCtl );
bool converted = pluginType != IO_MGR::LEGACY && pluginType != IO_MGR::KICAD;
if( !converted )
{
// PROJECT::SetProjectFullName() is an impactful function. It should only be
// called under carefully considered circumstances.
// The calling code should know not to ask me here to change projects unless
// it knows what consequences that will have on other KIFACEs running and using
// this same PROJECT. It can be very harmful if that calling code is stupid.
Prj().SetProjectFullName( pro.GetFullPath() );
// load project settings before BOARD
LoadProjectSettings();
}
if( is_new )
{
OnModify();
}
else
{
BOARD* loadedBoard = 0; // it will be set to non-NULL if loaded OK
PLUGIN::RELEASER pi( IO_MGR::PluginFind( pluginType ) );
try
{
PROPERTIES props;
char xbuf[30];
char ybuf[30];
// EAGLE_PLUGIN can use this info to center the BOARD, but it does not yet.
sprintf( xbuf, "%d", GetPageSizeIU().x );
sprintf( ybuf, "%d", GetPageSizeIU().y );
props["page_width"] = xbuf;
props["page_height"] = ybuf;
#if USE_INSTRUMENTATION
// measure the time to load a BOARD.
unsigned startTime = GetRunningMicroSecs();
#endif
loadedBoard = pi->Load( fullFileName, NULL, &props );
#if USE_INSTRUMENTATION
unsigned stopTime = GetRunningMicroSecs();
printf( "PLUGIN::Load(): %u usecs\n", stopTime - startTime );
#endif
}
catch( const IO_ERROR& ioe )
{
wxString msg = wxString::Format( _(
"Error loading board.\n%s" ),
GetChars( ioe.errorText )
);
DisplayError( this, msg );
return false;
}
SetBoard( loadedBoard );
// we should not ask PLUGINs to do these items:
loadedBoard->BuildListOfNets();
loadedBoard->SynchronizeNetsAndNetClasses();
SetStatusText( wxEmptyString );
BestZoom();
// update the layer names in the listbox
ReCreateLayerBox( false );
GetScreen()->ClrModify();
{
wxFileName fn = fullFileName;
CheckForAutoSaveFile( fullFileName, fn.GetExt() );
}
if( pluginType == IO_MGR::LEGACY &&
loadedBoard->GetFileFormatVersionAtLoad() < LEGACY_BOARD_FILE_VERSION )
{
DisplayInfoMessage( this,
_( "This file was created by an older version of Pcbnew.\n"
"It will be stored in the new file format when you save this file again." ) );
}
}
{
wxFileName fn = fullFileName;
if( converted )
fn.SetExt( PcbFileExtension );
wxString fname = fn.GetFullPath();
fname.Replace( WIN_STRING_DIR_SEP, UNIX_STRING_DIR_SEP );
GetBoard()->SetFileName( fname );
}
UpdateTitle();
if( !converted )
UpdateFileHistory( GetBoard()->GetFileName() );
// Rebuild the new pad list (for drc and ratsnet control ...)
GetBoard()->m_Status_Pcb = 0;
// Update info shown by the horizontal toolbars
SetCurrentNetClass( NETCLASS::Default );
ReFillLayerWidget();
ReCreateLayerBox();
// upate the layer widget to match board visibility states, both layers and render columns.
syncLayerVisibilities();
syncLayerWidgetLayer();
syncRenderStates();
// Update the tracks / vias available sizes list:
ReCreateAuxiliaryToolbar();
// Update the RATSNEST items, which were not loaded at the time
// BOARD::SetVisibleElements() was called from within any PLUGIN.
// See case RATSNEST_VISIBLE: in BOARD::SetElementVisibility()
GetBoard()->SetVisibleElements( GetBoard()->GetVisibleElements() );
// Display the loaded board:
Zoom_Automatique( false );
// Compile ratsnest and displays net info
{
wxBusyCursor dummy; // Displays an Hourglass while building connectivity
Compile_Ratsnest( NULL, true );
GetBoard()->GetRatsnest()->ProcessBoard();
}
SetMsgPanel( GetBoard() );
// Refresh the 3D view, if any
if( m_Draw3DFrame )
m_Draw3DFrame->NewDisplay();
#if 0 && defined(DEBUG)
// Output the board object tree to stdout, but please run from command prompt:
GetBoard()->Show( 0, std::cout );
#endif
// from EDA_APPL which was first loaded BOARD only:
{
/* For an obscure reason the focus is lost after loading a board file
* when starting up the process.
* (seems due to the recreation of the layer manager after loading the file)
* Give focus to main window and Drawpanel
* must be done for these 2 windows (for an obscure reason ...)
* Linux specific
* This is more a workaround than a fix.
*/
SetFocus();
GetCanvas()->SetFocus();
}
return true;
}
void PCB_EDIT_FRAME::Files_io_from_id( int id )
{
wxString msg;
// If an edition is in progress, stop it.
// For something else than save, get rid of current tool.
if( id == ID_SAVE_BOARD )
m_canvas->EndMouseCapture( -1, m_canvas->GetDefaultCursor() );
else
m_canvas->EndMouseCapture( ID_NO_TOOL_SELECTED, m_canvas->GetDefaultCursor() );
switch( id )
{
case ID_LOAD_FILE:
{
// LoadOnePcbFile( GetBoard()->GetFileName(), append=false, aForceFileDialog=true );
int open_ctl;
wxString fileName = Prj().AbsolutePath( GetBoard()->GetFileName() );
if( !AskLoadBoardFileName( this, &open_ctl, &fileName ) )
return;
OpenProjectFiles( std::vector<wxString>( 1, fileName ), open_ctl );
}
break;
case ID_MENU_READ_BOARD_BACKUP_FILE:
case ID_MENU_RECOVER_BOARD_AUTOSAVE:
{
wxFileName currfn = Prj().AbsolutePath( GetBoard()->GetFileName() );
wxFileName fn = currfn;
if( id == ID_MENU_RECOVER_BOARD_AUTOSAVE )
{
wxString rec_name = wxString( autosavePrefix ) + fn.GetName();
fn.SetName( rec_name );
}
else
{
wxString backup_ext = fn.GetExt()+ backupSuffix;
fn.SetExt( backup_ext );
}
if( !fn.FileExists() )
{
msg.Printf( _( "Recovery file '%s' not found." ),
GetChars( fn.GetFullPath() ) );
DisplayInfoMessage( this, msg );
break;
}
msg.Printf( _( "OK to load recovery or backup file '%s'" ),
GetChars(fn.GetFullPath() ) );
if( !IsOK( this, msg ) )
break;
GetScreen()->ClrModify(); // do not prompt the user for changes
// LoadOnePcbFile( fn.GetFullPath(), aAppend=false, aForceFileDialog=false );
OpenProjectFiles( std::vector<wxString>( 1, fn.GetFullPath() ) );
// Re-set the name since name or extension was changed
GetBoard()->SetFileName( currfn.GetFullPath() );
UpdateTitle();
}
break;
case ID_APPEND_FILE:
{
int open_ctl;
wxString fileName;
if( !AskLoadBoardFileName( this, &open_ctl, &fileName, true ) )
break;
AppendBoardFile( fileName, open_ctl );
m_canvas->Refresh();
}
break;
case ID_NEW_BOARD:
{
if( !Clear_Pcb( true ) )
break;
wxFileName fn( wxStandardPaths::Get().GetDocumentsDir(), wxT( "noname" ),
ProjectFileExtension );
Prj().SetProjectFullName( fn.GetFullPath() );
fn.SetExt( PcbFileExtension );
GetBoard()->SetFileName( fn.GetFullPath() );
UpdateTitle();
ReCreateLayerBox();
break;
}
case ID_SAVE_BOARD:
if( ! GetBoard()->GetFileName().IsEmpty() )
{
SavePcbFile( Prj().AbsolutePath( GetBoard()->GetFileName() ) );
break;
}
// Fall through
case ID_COPY_BOARD_AS:
case ID_SAVE_BOARD_AS:
{
wxString pro_dir = wxPathOnly( Prj().GetProjectFullName() );
wxFileName fn( pro_dir, _( "noname" ), KiCadPcbFileExtension );
wxString filename = fn.GetFullPath();
if( AskSaveBoardFileName( this, &filename ) )
{
if( id == ID_COPY_BOARD_AS )
SavePcbCopy( filename );
else
SavePcbFile( filename, NO_BACKUP_FILE );
}
}
break;
default:
DisplayError( this, wxT( "File_io Internal Error" ) );
break;
}
}
bool PCB_EDIT_FRAME::AppendBoardFile( const wxString& aFullFileName, int aCtl )
{
IO_MGR::PCB_FILE_T pluginType = plugin_type( aFullFileName, aCtl );
PLUGIN::RELEASER pi( IO_MGR::PluginFind( pluginType ) );
// keep trace of existing items, in order to know what are the new items
// (for undo command for instance)
// Tracks are inserted, not append, so mark existing tracks to know what are
// the new tracks
for( TRACK* track = GetBoard()->m_Track; track; track = track->Next() )
track->SetFlags( FLAG0 );
// Other items are append to the item list, so keep trace to the
// last existing item is enough
MODULE* module = GetBoard()->m_Modules.GetLast();
BOARD_ITEM* drawing = GetBoard()->m_Drawings.GetLast();
int zonescount = GetBoard()->GetAreaCount();
// Keep also the count of copper layers, because we can happen boards
// with different copper layers counts,
// and the enabled layers
int initialCopperLayerCount = GetBoard()->GetCopperLayerCount();
LSET initialEnabledLayers = GetBoard()->GetEnabledLayers();
try
{
PROPERTIES props;
char xbuf[30];
char ybuf[30];
// EAGLE_PLUGIN can use this info to center the BOARD, but it does not yet.
sprintf( xbuf, "%d", GetPageSizeIU().x );
sprintf( ybuf, "%d", GetPageSizeIU().y );
props["page_width"] = xbuf;
props["page_height"] = ybuf;
GetDesignSettings().m_NetClasses.Clear();
pi->Load( aFullFileName, GetBoard(), &props );
}
catch( const IO_ERROR& ioe )
{
for( TRACK* track = GetBoard()->m_Track; track; track = track->Next() )
track->ClearFlags( FLAG0 );
wxString msg = wxString::Format( _(
"Error loading board.\n%s" ),
GetChars( ioe.What() )
);
DisplayError( this, msg );
return false;
}
// Now prepare a block move command to place the new items, and
// prepare the undo command.
BLOCK_SELECTOR& blockmove = GetScreen()->m_BlockLocate;
HandleBlockBegin( NULL, BLOCK_PRESELECT_MOVE, wxPoint( 0, 0) );
PICKED_ITEMS_LIST& blockitemsList = blockmove.GetItems();
PICKED_ITEMS_LIST undoListPicker;
ITEM_PICKER picker( NULL, UR_NEW );
EDA_RECT bbox; // the new items bounding box, for block move
bool bboxInit = true; // true until the bounding box is initialized
for( TRACK* track = GetBoard()->m_Track; track; track = track->Next() )
{
if( track->GetFlags() & FLAG0 )
{
track->ClearFlags( FLAG0 );
continue;
}
track->SetFlags( IS_MOVED );
picker.SetItem( track );
undoListPicker.PushItem( picker );
blockitemsList.PushItem( picker );
if( bboxInit )
bbox = track->GetBoundingBox();
else
bbox.Merge( track->GetBoundingBox() );
bboxInit = false;
}
if( module )
module = module->Next();
else
module = GetBoard()->m_Modules;
for( ; module; module = module->Next() )
{
module->SetFlags( IS_MOVED );
picker.SetItem( module );
undoListPicker.PushItem( picker );
blockitemsList.PushItem( picker );
if( bboxInit )
bbox = module->GetBoundingBox();
else
bbox.Merge( module->GetBoundingBox() );
bboxInit = false;
}
if( drawing )
drawing = drawing->Next();
else
drawing = GetBoard()->m_Drawings;
for( ; drawing; drawing = drawing->Next() )
{
drawing->SetFlags( IS_MOVED );
picker.SetItem( drawing );
undoListPicker.PushItem( picker );
blockitemsList.PushItem( picker );
if( bboxInit )
bbox = drawing->GetBoundingBox();
else
bbox.Merge( drawing->GetBoundingBox() );
bboxInit = false;
}
for( ZONE_CONTAINER* zone = GetBoard()->GetArea( zonescount ); zone;
zone = GetBoard()->GetArea( zonescount ) )
{
zone->SetFlags( IS_MOVED );
picker.SetItem( zone );
undoListPicker.PushItem( picker );
blockitemsList.PushItem( picker );
zonescount++;
if( bboxInit )
bbox = zone->GetBoundingBox();
else
bbox.Merge( zone->GetBoundingBox() );
bboxInit = false;
}
SaveCopyInUndoList( undoListPicker, UR_NEW );
// we should not ask PLUGINs to do these items:
int copperLayerCount = GetBoard()->GetCopperLayerCount();
if( copperLayerCount > initialCopperLayerCount )
GetBoard()->SetCopperLayerCount( copperLayerCount );
// Enable all used layers, and make them visible:
LSET enabledLayers = GetBoard()->GetEnabledLayers();
enabledLayers |= initialEnabledLayers;
GetBoard()->SetEnabledLayers( enabledLayers );
GetBoard()->SetVisibleLayers( enabledLayers );
ReCreateLayerBox();
ReFillLayerWidget();
if( IsGalCanvasActive() )
static_cast<PCB_DRAW_PANEL_GAL*>( GetGalCanvas() )->SyncLayersVisibility( GetBoard() );
GetBoard()->BuildListOfNets();
GetBoard()->SynchronizeNetsAndNetClasses();
SetStatusText( wxEmptyString );
BestZoom();
// Finish block move command:
wxPoint cpos = GetNearestGridPosition( bbox.Centre() );
blockmove.SetOrigin( bbox.GetOrigin() );
blockmove.SetSize( bbox.GetSize() );
blockmove.SetLastCursorPosition( cpos );
HandleBlockEnd( NULL );
return true;
}
void PCB_EDIT_FRAME::OnLayerColorChange( wxCommandEvent& aEvent )
{
ReCreateLayerBox();
}
void WinEDA_PcbFrame::ReCreateHToolbar(void)
/******************************************/
// Create the main horizontal toolbar
{
int ii;
if ( m_HToolBar != NULL )
{ // simple mise a jour de la liste des fichiers anciens
wxMenuItem * item;
for ( ii = 9; ii >=0 ; ii-- )
{
if( m_FilesMenu->FindItem(ID_LOAD_FILE_1 + ii) )
{
item = m_FilesMenu->Remove(ID_LOAD_FILE_1 + ii);
if ( item ) delete item;
}
}
for ( ii = 0; ii < 10; ii++ )
{
if ( GetLastProject(ii).IsEmpty() ) break;
m_FilesMenu->Append(ID_LOAD_FILE_1 + ii, GetLastProject(ii) );
}
SetToolbars();
return;
}
m_HToolBar = new WinEDA_Toolbar(TOOLBAR_MAIN, this, ID_H_TOOLBAR, TRUE);
m_HToolBar->SetRows(1);
SetToolBar(m_HToolBar);
// Set up toolbar
m_HToolBar->AddTool(ID_NEW_BOARD, wxEmptyString, BITMAP(new_xpm), _("New Board"));
m_HToolBar->AddTool(ID_LOAD_FILE, wxEmptyString, BITMAP(open_xpm), _("Open existing Board"));
m_HToolBar->AddTool(ID_SAVE_BOARD, wxEmptyString, BITMAP(save_xpm), _("Save Board"));
m_HToolBar->AddSeparator();
m_HToolBar->AddTool(ID_SHEET_SET, wxEmptyString, BITMAP(sheetset_xpm), _("page settings (size, texts)") );
m_HToolBar->AddSeparator();
m_HToolBar->AddTool(ID_OPEN_MODULE_EDITOR, wxEmptyString, BITMAP(modedit_xpm),
_("Open Module Editor"));
m_HToolBar->AddSeparator();
m_HToolBar->AddTool(wxID_CUT, wxEmptyString, BITMAP(cut_button), _("Cut selected item"));
#if 0
m_HToolBar->AddTool(wxID_COPY, wxEmptyString, BITMAP(copy_button), _("Copy selected item"));
m_HToolBar->AddTool(wxID_PASTE, wxEmptyString, BITMAP(paste_xpm), _("Paste"));
#endif
m_HToolBar->AddTool(ID_UNDO_BUTT, wxEmptyString, BITMAP(undelete_xpm), _("Undelete"));
m_HToolBar->AddSeparator();
m_HToolBar->AddTool(ID_GEN_PRINT, wxEmptyString, BITMAP(print_button), _("Print Board"));
m_HToolBar->AddTool(ID_GEN_PLOT, wxEmptyString, BITMAP(plot_xpm), _("Plot (Hplg, Postscript, or Gerber format)"));
m_HToolBar->AddSeparator();
m_HToolBar->AddTool(ID_ZOOM_PLUS_BUTT, wxEmptyString, BITMAP(zoom_in_xpm), _("zoom + (F1)"));
m_HToolBar->AddTool(ID_ZOOM_MOINS_BUTT, wxEmptyString, BITMAP(zoom_out_xpm), _("zoom - (F2)"));
m_HToolBar->AddTool(ID_ZOOM_REDRAW_BUTT, wxEmptyString, BITMAP(repaint_xpm), _("redraw (F3)"));
m_HToolBar->AddTool(ID_ZOOM_PAGE_BUTT, wxEmptyString, BITMAP(zoom_optimal_xpm), _("auto zoom"));
m_HToolBar->AddSeparator();
m_HToolBar->AddTool(ID_FIND_ITEMS, wxEmptyString, BITMAP(find_xpm), _("Find components and texts"));
m_HToolBar->AddSeparator();
m_HToolBar->AddTool(ID_GET_NETLIST, wxEmptyString, BITMAP(netlist_xpm), _("Read Netlist"));
m_HToolBar->AddTool(ID_DRC_CONTROL, wxEmptyString, BITMAP(erc_xpm), _("Pcb Design Rules Check"));
m_HToolBar->AddSeparator();
ReCreateLayerBox(m_HToolBar);
m_HToolBar->AddSeparator();
m_HToolBar->AddTool(ID_TOOLBARH_PCB_AUTOPLACE, wxEmptyString, BITMAP(mode_module_xpm),
_("Mode Module: Manual and Automatic Move or Place for modules"), wxITEM_CHECK );
m_HToolBar->AddTool(ID_TOOLBARH_PCB_AUTOROUTE, wxEmptyString, BITMAP(mode_track_xpm),
_("Mode Track and Autorouting"), wxITEM_CHECK);
// after adding the buttons to the toolbar, must call Realize() to reflect
// the changes
m_HToolBar->Realize();
SetToolbars();
}
void WinEDA_PcbFrame::SetToolbars(void)
/***************************************/
/*
Active ou desactive les tools des toolbars, en fonction des commandes
en cours
*/
{
int ii, jj;
if ( m_ID_current_state == ID_TRACK_BUTT )
{
if ( Drc_On ) DrawPanel->SetCursor(wxCursor(wxCURSOR_PENCIL));
else DrawPanel->SetCursor(wxCursor(wxCURSOR_QUESTION_ARROW));
}
if( m_HToolBar == NULL ) return;
m_HToolBar->EnableTool(ID_SAVE_BOARD,m_CurrentScreen->IsModify());
if ( m_CurrentScreen->BlockLocate.m_Command == BLOCK_MOVE )
{
m_HToolBar->EnableTool(wxID_CUT,TRUE);
m_HToolBar->EnableTool(wxID_COPY,TRUE);
}
else
{
m_HToolBar->EnableTool(wxID_CUT,FALSE);
m_HToolBar->EnableTool(wxID_COPY,FALSE);
}
if ( g_UnDeleteStackPtr )
{
m_HToolBar->EnableTool(wxID_PASTE,TRUE);
}
else
{
m_HToolBar->EnableTool(wxID_PASTE,FALSE);
}
if ( g_UnDeleteStackPtr )
{
m_HToolBar->EnableTool(ID_UNDO_BUTT,TRUE);
}
else m_HToolBar->EnableTool(ID_UNDO_BUTT,FALSE);
if ( m_OptionsToolBar )
{
m_OptionsToolBar->ToggleTool(ID_TB_OPTIONS_DRC_OFF,
! Drc_On);
m_OptionsToolBar->SetToolShortHelp(ID_TB_OPTIONS_DRC_OFF,
Drc_On ? _("DCR Off (Disable !!!), Currently: DRC is active") : _("DRC On (Currently: DRC is DISABLE !!!)"));
m_OptionsToolBar->ToggleTool(ID_TB_OPTIONS_SELECT_UNIT_MM,
UnitMetric == MILLIMETRE ? TRUE : FALSE);
m_OptionsToolBar->ToggleTool(ID_TB_OPTIONS_SELECT_UNIT_INCH,
UnitMetric == INCHES ? TRUE : FALSE);
m_OptionsToolBar->ToggleTool(ID_TB_OPTIONS_SHOW_POLAR_COORD,
DisplayOpt.DisplayPolarCood);
m_OptionsToolBar->SetToolShortHelp(ID_TB_OPTIONS_SHOW_POLAR_COORD,
DisplayOpt.DisplayPolarCood ? _("Polar Coords not show") : _("Display Polar Coords"));
m_OptionsToolBar->ToggleTool(ID_TB_OPTIONS_SHOW_GRID,
m_Draw_Grid);
m_OptionsToolBar->SetToolShortHelp(ID_TB_OPTIONS_SHOW_GRID,
m_Draw_Grid ? _("Grid not show") : _("Show Grid"));
m_OptionsToolBar->ToggleTool(ID_TB_OPTIONS_SELECT_CURSOR,
g_CursorShape);
m_OptionsToolBar->ToggleTool(ID_TB_OPTIONS_SHOW_RATSNEST,
g_Show_Ratsnest);
m_OptionsToolBar->SetToolShortHelp(ID_TB_OPTIONS_SHOW_RATSNEST,
g_Show_Ratsnest ? _("General ratsnest not show") : _("Show General ratsnest"));
m_OptionsToolBar->ToggleTool(ID_TB_OPTIONS_SHOW_MODULE_RATSNEST,
g_Show_Module_Ratsnest);
m_OptionsToolBar->SetToolShortHelp(ID_TB_OPTIONS_SHOW_MODULE_RATSNEST,
g_Show_Module_Ratsnest ? _("Module ratsnest not show") : _("Show Module ratsnest"));
m_OptionsToolBar->ToggleTool(ID_TB_OPTIONS_AUTO_DEL_TRACK,
g_AutoDeleteOldTrack);
m_OptionsToolBar->SetToolShortHelp(ID_TB_OPTIONS_AUTO_DEL_TRACK,
g_AutoDeleteOldTrack ? _("Disable Auto Delete old Track") : _("Enable Auto Delete old Track"));
m_OptionsToolBar->ToggleTool(ID_TB_OPTIONS_SHOW_ZONES,
DisplayOpt.DisplayZones);
m_OptionsToolBar->SetToolShortHelp(ID_TB_OPTIONS_SHOW_ZONES,
DisplayOpt.DisplayZones ? _("Do not Show Zones") : _("Show Zones"));
m_OptionsToolBar->ToggleTool(ID_TB_OPTIONS_SHOW_PADS_SKETCH,
! m_DisplayPadFill);
m_OptionsToolBar->SetToolShortHelp(ID_TB_OPTIONS_SHOW_PADS_SKETCH,
m_DisplayPadFill ? _("Show Pads Sketch mode") : _("Show pads filled mode"));
m_OptionsToolBar->ToggleTool(ID_TB_OPTIONS_SHOW_TRACKS_SKETCH,
! m_DisplayPcbTrackFill);
m_OptionsToolBar->SetToolShortHelp(ID_TB_OPTIONS_SHOW_TRACKS_SKETCH,
m_DisplayPcbTrackFill ? _("Show Tracks Sketch mode") : _("Show Tracks filled mode"));
m_OptionsToolBar->ToggleTool(ID_TB_OPTIONS_SHOW_HIGHT_CONTRAST_MODE,
DisplayOpt.ContrastModeDisplay);
m_OptionsToolBar->SetToolShortHelp(ID_TB_OPTIONS_SHOW_HIGHT_CONTRAST_MODE,
DisplayOpt.ContrastModeDisplay ? _("Normal Contrast Mode Display") : _("Hight Contrast Mode Display"));
}
if ( m_AuxiliaryToolBar )
{
wxString msg;
if ( m_SelTrackWidthBox && m_SelTrackWidthBox_Changed)
{
m_SelTrackWidthBox_Changed = FALSE;
m_SelTrackWidthBox->Clear();
wxString format = _("Track");
if ( UnitMetric == INCHES ) format += wxT(" %.1f");
else format += wxT(" %.3f");
for ( ii = 0; ii < HIST0RY_NUMBER; ii++)
{
if ( g_DesignSettings.m_TrackWidhtHistory[ii] == 0 ) break; // Fin de liste
double value = To_User_Unit(UnitMetric,
g_DesignSettings.m_TrackWidhtHistory[ii], PCB_INTERNAL_UNIT);
if ( UnitMetric == INCHES )
msg.Printf(format.GetData(), value * 1000);
else
msg.Printf(format.GetData(), value);
m_SelTrackWidthBox->Append(msg);
if ( g_DesignSettings.m_TrackWidhtHistory[ii] == g_DesignSettings.m_CurrentTrackWidth )
m_SelTrackWidthBox->SetSelection(ii);
}
}
if ( m_SelViaSizeBox && m_SelViaSizeBox_Changed )
{
m_SelViaSizeBox_Changed = FALSE;
m_SelViaSizeBox->Clear();
wxString format = _("Via");
if ( UnitMetric == INCHES ) format += wxT(" %.1f");
else format += wxT(" %.3f");
for ( ii = 0; ii < HIST0RY_NUMBER; ii++)
{
if ( g_DesignSettings.m_ViaSizeHistory[ii] == 0 ) break; // Fin de liste
double value = To_User_Unit(UnitMetric,
g_DesignSettings.m_ViaSizeHistory[ii], PCB_INTERNAL_UNIT);
if ( UnitMetric == INCHES )
msg.Printf(format.GetData(), value * 1000);
else
msg.Printf(format.GetData(), value);
m_SelViaSizeBox->Append(msg);
if ( g_DesignSettings.m_ViaSizeHistory[ii] == g_DesignSettings.m_CurrentViaSize )
m_SelViaSizeBox->SetSelection(ii);
}
}
if ( m_SelZoomBox )
{
int kk = m_SelZoomBox->GetSelection();
for ( jj = 0, ii = 1; ii <= 2048; ii <<= 1, jj++ )
{
if ( m_CurrentScreen && (m_CurrentScreen->GetZoom() == ii) )
{
if ( kk != jj )m_SelZoomBox->SetSelection(jj);
kk = jj;
break;
}
}
if ( kk != jj )m_SelZoomBox->SetSelection(-1);
}
if ( m_SelGridBox && m_CurrentScreen)
{
int kk = m_SelGridBox->GetSelection();
for ( ii = 0; g_GridList[ii].x > 0; ii++ )
{
if ( !m_CurrentScreen->m_UserGridIsON &&
(m_CurrentScreen->GetGrid().x == g_GridList[ii].x) &&
(m_CurrentScreen->GetGrid().y == g_GridList[ii].y) )
{
if (kk != ii) m_SelGridBox->SetSelection(ii);
kk = ii;
break;
}
}
if ( kk != ii )
m_SelGridBox->SetSelection(ii); /* User Grid */
}
}
ReCreateLayerBox(NULL);
DisplayUnitsMsg();
}
void PCB_EDIT_FRAME::ReCreateHToolbar()
{
wxString msg;
if( m_mainToolBar )
return;
wxWindowUpdateLocker dummy( this );
m_mainToolBar = new wxAuiToolBar( this, ID_H_TOOLBAR, wxDefaultPosition, wxDefaultSize,
wxAUI_TB_DEFAULT_STYLE | wxAUI_TB_HORZ_LAYOUT );
// Set up toolbar
if( Kiface().IsSingle() )
{
m_mainToolBar->AddTool( ID_NEW_BOARD, wxEmptyString, KiBitmap( new_pcb_xpm ),
_( "New board" ) );
m_mainToolBar->AddTool( ID_LOAD_FILE, wxEmptyString, KiBitmap( open_brd_file_xpm ),
_( "Open existing board" ) );
}
m_mainToolBar->AddTool( ID_SAVE_BOARD, wxEmptyString, KiBitmap( save_xpm ),
_( "Save board" ) );
m_mainToolBar->AddSeparator();
m_mainToolBar->AddTool( ID_SHEET_SET, wxEmptyString, KiBitmap( sheetset_xpm ),
_( "Page settings for paper size and texts" ) );
m_mainToolBar->AddSeparator();
m_mainToolBar->AddTool( ID_OPEN_MODULE_EDITOR, wxEmptyString,
KiBitmap( module_editor_xpm ),
_( "Open footprint editor" ) );
m_mainToolBar->AddTool( ID_OPEN_MODULE_VIEWER, wxEmptyString,
KiBitmap( modview_icon_xpm ),
_( "Open footprint viewer" ) );
m_mainToolBar->AddSeparator();
msg = AddHotkeyName( HELP_UNDO, g_Board_Editor_Hokeys_Descr, HK_UNDO, IS_COMMENT );
m_mainToolBar->AddTool( wxID_UNDO, wxEmptyString, KiBitmap( undo_xpm ), msg );
msg = AddHotkeyName( HELP_REDO, g_Board_Editor_Hokeys_Descr, HK_REDO, IS_COMMENT );
m_mainToolBar->AddTool( wxID_REDO, wxEmptyString, KiBitmap( redo_xpm ), msg );
m_mainToolBar->AddSeparator();
m_mainToolBar->AddTool( wxID_PRINT, wxEmptyString, KiBitmap( print_button_xpm ),
_( "Print board" ) );
m_mainToolBar->AddTool( ID_GEN_PLOT, wxEmptyString, KiBitmap( plot_xpm ),
_( "Plot (HPGL, PostScript, or GERBER format)" ) );
m_mainToolBar->AddSeparator();
msg = AddHotkeyName( HELP_ZOOM_IN, g_Board_Editor_Hokeys_Descr, HK_ZOOM_IN, IS_COMMENT );
m_mainToolBar->AddTool( ID_ZOOM_IN, wxEmptyString, KiBitmap( zoom_in_xpm ), msg );
msg = AddHotkeyName( HELP_ZOOM_OUT, g_Board_Editor_Hokeys_Descr, HK_ZOOM_OUT, IS_COMMENT );
m_mainToolBar->AddTool( ID_ZOOM_OUT, wxEmptyString, KiBitmap( zoom_out_xpm ), msg );
msg = AddHotkeyName( HELP_ZOOM_REDRAW, g_Board_Editor_Hokeys_Descr, HK_ZOOM_REDRAW,
IS_COMMENT );
m_mainToolBar->AddTool( ID_ZOOM_REDRAW, wxEmptyString, KiBitmap( zoom_redraw_xpm ), msg );
msg = AddHotkeyName( HELP_ZOOM_FIT, g_Board_Editor_Hokeys_Descr, HK_ZOOM_AUTO, IS_COMMENT );
m_mainToolBar->AddTool( ID_ZOOM_PAGE, wxEmptyString, KiBitmap( zoom_fit_in_page_xpm ), msg );
m_mainToolBar->AddSeparator();
msg = AddHotkeyName( HELP_FIND, g_Board_Editor_Hokeys_Descr, HK_FIND_ITEM, IS_COMMENT );
m_mainToolBar->AddTool( ID_FIND_ITEMS, wxEmptyString, KiBitmap( find_xpm ), msg );
m_mainToolBar->AddSeparator();
m_mainToolBar->AddTool( ID_GET_NETLIST, wxEmptyString, KiBitmap( netlist_xpm ),
_( "Read netlist" ) );
m_mainToolBar->AddTool( ID_DRC_CONTROL, wxEmptyString, KiBitmap( erc_xpm ),
_( "Perform design rules check" ) );
m_mainToolBar->AddSeparator();
if( m_SelLayerBox == NULL )
{
m_SelLayerBox = new PCB_LAYER_BOX_SELECTOR( m_mainToolBar, ID_TOOLBARH_PCB_SELECT_LAYER );
m_SelLayerBox->SetBoardFrame( this );
}
ReCreateLayerBox( false );
m_mainToolBar->AddControl( m_SelLayerBox );
PrepareLayerIndicator(); // Initialize the bitmap with current
// active layer colors for the next tool
m_mainToolBar->AddTool( ID_AUX_TOOLBAR_PCB_SELECT_LAYER_PAIR, wxEmptyString,
*LayerPairBitmap, SEL_LAYER_HELP );
m_mainToolBar->AddSeparator();
m_mainToolBar->AddTool( ID_TOOLBARH_PCB_MODE_MODULE, wxEmptyString, KiBitmap( mode_module_xpm ),
_( "Mode footprint: manual and automatic movement and placement" ),
wxITEM_CHECK );
m_mainToolBar->AddTool( ID_TOOLBARH_PCB_MODE_TRACKS, wxEmptyString, KiBitmap( mode_track_xpm ),
_( "Mode track: autorouting" ), wxITEM_CHECK );
// Fast call to FreeROUTE Web Bases router
m_mainToolBar->AddSeparator();
m_mainToolBar->AddTool( ID_TOOLBARH_PCB_FREEROUTE_ACCESS, wxEmptyString,
KiBitmap( web_support_xpm ),
_( "Fast access to the FreeROUTE external advanced router" ) );
// Access to the scripting console
#if defined(KICAD_SCRIPTING_WXPYTHON)
if( IsWxPythonLoaded() )
{
m_mainToolBar->AddSeparator();
m_mainToolBar->AddTool( ID_TOOLBARH_PCB_SCRIPTING_CONSOLE, wxEmptyString,
KiBitmap( py_script_xpm ),
_( "Show/Hide the Python Scripting console" ),
wxITEM_CHECK );
}
#endif
// after adding the buttons to the toolbar, must call Realize() to reflect the changes
m_mainToolBar->Realize();
}
