void s3c_i2c2_cfg_gpio(struct platform_device *dev)
{
	s3c_gpio_cfgpin(S5PV210_GPD1(4), S3C_GPIO_SFN(2));
	s3c_gpio_setpull(S5PV210_GPD1(4), S3C_GPIO_PULL_NONE);
	s3c_gpio_cfgpin(S5PV210_GPD1(5), S3C_GPIO_SFN(2));
	s3c_gpio_setpull(S5PV210_GPD1(5), S3C_GPIO_PULL_NONE);
}
void s3c_i2c1_cfg_gpio(struct platform_device *dev)
{
	s3c_gpio_cfgpin(S5PV210_GPD1(2), S3C_GPIO_SFN(2));
	s3c_gpio_setpull(S5PV210_GPD1(2), S3C_GPIO_PULL_UP);
	s3c_gpio_cfgpin(S5PV210_GPD1(3), S3C_GPIO_SFN(2));
	s3c_gpio_setpull(S5PV210_GPD1(3), S3C_GPIO_PULL_UP);
}
예제 #3
0
			.ngpio	= S5PV210_GPIO_C1_NR,
			.label	= "GPC1",
		},
	}, {
		.base	= S5PV210_GPD0_BASE,
		.config	= &gpio_cfg,
		.chip	= {
			.base	= S5PV210_GPD0(0),
			.ngpio	= S5PV210_GPIO_D0_NR,
			.label	= "GPD0",
		},
	}, {
		.base	= S5PV210_GPD1_BASE,
		.config	= &gpio_cfg,
		.chip	= {
			.base	= S5PV210_GPD1(0),
			.ngpio	= S5PV210_GPIO_D1_NR,
			.label	= "GPD1",
		},
	}, {
		.base	= S5PV210_GPE0_BASE,
		.config	= &gpio_cfg,
		.chip	= {
			.base	= S5PV210_GPE0(0),
			.ngpio	= S5PV210_GPIO_E0_NR,
			.label	= "GPE0",
		},
	}, {
		.base	= S5PV210_GPE1_BASE,
		.config	= &gpio_cfg,
		.chip	= {
void s3c_i2c2_cfg_gpio(struct platform_device *dev)
{
	s3c_gpio_cfgall_range(S5PV210_GPD1(4), 2,
			      S3C_GPIO_SFN(2), S3C_GPIO_PULL_UP);
}
예제 #5
0
	.data = vd5376_table,
	.ndatas	= ARRAY_SIZE(vd5376_table),
	.scan_ms = 50,
};

static struct platform_device vd5376_mouse_device = {
	.name	= "vd5376-mouse",
	.dev	= {
		.platform_data	= &vd5376_mouse_data,
	},
};
#endif

#ifdef CONFIG_I2C_GPIO
static struct i2c_gpio_platform_data i2c_gpio_platdata = {
	.sda_pin = S5PV210_GPD1(0),
	.scl_pin = S5PV210_GPD1(1),
	.udelay = 10,
	.sda_is_open_drain = 0,
	.scl_is_open_drain = 0,
	.scl_is_output_only = 0
};

static struct platform_device mango_i2c0_gpio = {
	.name	= "i2c-gpio",
	.id	= 0,
	.dev.platform_data = &i2c_gpio_platdata,
};

static struct i2c_gpio_platform_data i2c2_gpio_platdata = {
	.sda_pin = S5PV210_GPD1(4),