C++ (Cpp) S98_put 예제들

예제 #1

파일: board26k.c 프로젝트: aliaspider/np2

static void IOOUTCALL opn_o18a(UINT port, REG8 dat) {

	UINT	addr;

	g_opn.data1 = dat;
	addr = g_opn.addr1l;
	S98_put(NORMAL2608, addr, dat);
	g_opn.reg[addr] = dat;
	if (addr < 0x10) {
		psggen_setreg(&g_psg1, addr, dat);
	}
	else if (addr < 0x100) {
		if (addr < 0x30) {
			if (addr == 0x28) {
				if ((dat & 0x0f) < 3) {
					opngen_keyon(&g_opngen, dat & 0x0f, dat);
				}
			}
			else {
				fmtimer_setreg(addr, dat);
				if (addr == 0x27) {
					g_opngen.opnch[2].extop = dat & 0xc0;
				}
			}
		}
		else if (addr < 0xc0) {
			opngen_setreg(&g_opngen, 0, addr, dat);
		}
	}
	(void)port;
}

예제 #2

파일: boardx2.c 프로젝트: histat/dc-np2

static void IOOUTCALL opna_o18e(UINT port, REG8 dat) {

    UINT	addr;

    if (!opn.extend) {
        return;
    }
    addr = opn.addr - 0x100;
    if (addr >= 0x100) {
        return;
    }
    S98_put(EXTEND2608, addr, dat);
    opn.reg[addr + 0x100] = dat;
    if (addr >= 0x30) {
        opngen_setreg(6, addr, dat);
    }
    else {
        if (addr == 0x10) {
            if (!(dat & 0x80)) {
                opn.adpcmmask = ~(dat & 0x1c);
            }
        }
    }
    (void)port;
}

예제 #3

파일: board118.c 프로젝트: aliaspider/np2

static void IOOUTCALL ymf_o18e(UINT port, REG8 dat) {

	UINT	addr;

	if (!g_opn.extend) {
		return;
	}
	g_opn.data1 = dat;

	if (g_opn.addr1h != 1) {
		return;
	}
	addr = g_opn.addr1l;
	S98_put(EXTEND2608, addr, dat);
	g_opn.reg[addr + 0x100] = dat;
	if (addr >= 0x30) {
		opngen_setreg(&g_opngen, 3, addr, dat);
	}
	else {
		if (addr == 0x10) {
			if (!(dat & 0x80)) {
				g_opn.adpcmmask = ~(dat & 0x1c);
			}
		}
	}
	(void)port;
}

예제 #4

파일: opna.cpp 프로젝트: takamichih/np2_t

/**
 * Writes extended register
 * @param[in] opna The instance
 * @param[in] nAddress The address
 * @param[in] cData The data
 */
void opna_writeExtendedRegister(POPNA opna, UINT nAddress, REG8 cData)
{
	opna->s.reg[nAddress + 0x100] = cData;

	if (opna->s.cCaps & OPNA_S98)
	{
		S98_put(EXTEND2608, nAddress, cData);
	}

	writeExtendedRegister(opna, nAddress, cData);
}

예제 #5

파일: opna.cpp 프로젝트: takamichih/np2_t

/**
 * Writes register
 * @param[in] opna The instance
 * @param[in] nAddress The address
 * @param[in] cData The data
 */
void opna_writeRegister(POPNA opna, UINT nAddress, REG8 cData)
{
	opna->s.reg[nAddress] = cData;

	if (opna->s.cCaps & OPNA_S98)
	{
		S98_put(NORMAL2608, nAddress, cData);
	}

	writeRegister(opna, nAddress, cData);
}

예제 #6

파일: boardx2.c 프로젝트: histat/dc-np2

static void IOOUTCALL opna_o18a(UINT port, REG8 dat) {

    UINT	addr;

    opn.data = dat;
    addr = opn.addr;
    if (addr >= 0x100) {
        return;
    }
    S98_put(NORMAL2608, addr, dat);
    if (addr < 0x10) {
        if (addr != 0x0e) {
            psggen_setreg(&psg2, addr, dat);
        }
    }
    else {
        if (addr < 0x20) {
            if (opn.extend) {
                rhythm_setreg(&rhythm, addr, dat);
            }
        }
        else if (addr < 0x30) {
            if (addr == 0x28) {
                if ((dat & 0x0f) < 3) {
                    opngen_keyon((dat & 0x0f) + 3, dat);
                }
                else if (((dat & 0x0f) != 3) &&
                         ((dat & 0x0f) < 7)) {
                    opngen_keyon((dat & 0x0f) + 2, dat);
                }
            }
            else {
                fmtimer_setreg(addr, dat);
                if (addr == 0x27) {
                    opnch[2].extop = dat & 0xc0;
                }
            }
        }
        else if (addr < 0xc0) {
            opngen_setreg(3, addr, dat);
        }
        opn.reg[addr] = dat;
    }
    (void)port;
}

예제 #7

파일: boardspb.c 프로젝트: perabuss/np2wii

static void IOOUTCALL spb_o18e(UINT port, REG8 dat) {

	UINT	addr;

	opn.data = dat;
	addr = opn.addr - 0x100;
	if (addr >= 0x100) {
		return;
	}
	S98_put(EXTEND2608, addr, dat);
	opn.reg[addr + 0x100] = dat;
	if (addr >= 0x30) {
		opngen_setreg(3, addr, dat);
	}
	else if (addr < 0x12) {
		adpcm_setreg(&adpcm, addr, dat);
	}
	(void)port;
}

예제 #8

파일: board118.c 프로젝트: histat/dc-np2

static void IOOUTCALL ymf_o18a(UINT port, REG8 dat) {

	UINT	addr;

	opn.data = dat;
	addr = opn.addr;
	if (addr >= 0x100) {
		return;
	}
	S98_put(NORMAL2608, addr, dat);
	if (addr < 0x10) {
		if (addr != 0x0e) {
			psggen_setreg(&psg1, addr, dat);
		}
	}
	else {
		if (addr < 0x20) {
			rhythm_setreg(&rhythm, addr, dat);
		}
		else if (addr < 0x30) {
			if (addr == 0x28) {
				if ((dat & 0x0f) < 3) {
					opngen_keyon(dat & 0x0f, dat);
				}
				else if (((dat & 0x0f) != 3) &&
						((dat & 0x0f) < 7)) {
					opngen_keyon((dat & 0x07) - 1, dat);
				}
			}
			else {
				fmtimer_setreg(addr, dat);
			}
		}
		else if (addr < 0xc0) {
			opngen_setreg(0, addr, dat);
		}
		opn.reg[addr] = dat;
	}
	(void)port;
}

예제 #9

파일: board118.c 프로젝트: aliaspider/np2

static void IOOUTCALL ymf_o18a(UINT port, REG8 dat) {

	UINT	addr;

	g_opn.data1 = dat;
	if (g_opn.addr1h != 0) {
		return;
	}

	addr = g_opn.addr1l;
	S98_put(NORMAL2608, addr, dat);
	g_opn.reg[addr] = dat;
	if (addr < 0x10) {
		psggen_setreg(&g_psg1, addr, dat);
	}
	else {
		if (addr < 0x20) {
			rhythm_setreg(&g_rhythm, addr, dat);
		}
		else if (addr < 0x30) {
			if (addr == 0x28) {
				if ((dat & 0x0f) < 3) {
					opngen_keyon(&g_opngen, dat & 0x0f, dat);
				}
				else if (((dat & 0x0f) != 3) &&
						((dat & 0x0f) < 7)) {
					opngen_keyon(&g_opngen, (dat & 0x07) - 1, dat);
				}
			}
			else {
				fmtimer_setreg(addr, dat);
			}
		}
		else if (addr < 0xc0) {
			opngen_setreg(&g_opngen, 0, addr, dat);
		}
	}
	(void)port;
}