static void lcd_menu_change_material_select_material()
{
uint8_t count = eeprom_read_byte(EEPROM_MATERIAL_COUNT_OFFSET());
lcd_scroll_menu(PSTR("MATERIAL"), count, lcd_menu_change_material_select_material_callback, lcd_menu_change_material_select_material_details_callback);
if (lcd_lib_button_pressed)
{
lcd_material_set_material(SELECTED_SCROLL_MENU_ITEM(), active_extruder);
lcd_change_to_menu(lcd_menu_material_selected, MAIN_MENU_ITEM_POS(0));
}
}
static void lcd_menu_material_select()
{
uint8_t count = eeprom_read_byte(EEPROM_MATERIAL_COUNT_OFFSET());
lcd_scroll_menu(PSTR("MATERIAL"), count + MATERIAL_PRESETS, lcd_material_select_callback, lcd_material_select_details_callback);
if (lcd_lib_button_pressed)
{
if (IS_SELECTED_SCROLL(0))
lcd_change_to_menu(lcd_menu_material_main);
else
if (IS_SELECTED_SCROLL(count + 1))
lcd_change_to_menu(lcd_menu_material_settings);
else
{
lcd_material_set_material(SELECTED_SCROLL_MENU_ITEM() - 1, active_extruder);
lcd_change_to_menu(lcd_menu_material_selected, MAIN_MENU_ITEM_POS(0));
}
}
}
static void lcd_menu_first_run_material_select_material()
{
LED_GLOW();
uint8_t count = eeprom_read_byte(EEPROM_MATERIAL_COUNT_OFFSET());
lcd_scroll_menu(PSTR("MATERIAL"), count, lcd_material_select_callback, lcd_material_select_details_callback);
CLEAR_PROGRESS_NR(17);
lcd_lib_update_screen();
if (lcd_lib_button_pressed)
{
digipot_current(2, motor_current_setting[2]);//Set E motor power to default.
for(uint8_t e=0; e<EXTRUDERS; e++)
lcd_material_set_material(SELECTED_SCROLL_MENU_ITEM(), e);
SET_FIRST_RUN_DONE();
lcd_change_to_menu(lcd_menu_first_run_material_select_confirm_material);
strcat_P(card.longFilename, PSTR(" as material,"));
}
}
static void lcd_menu_material_settings_store()
{
uint8_t count = eeprom_read_byte(EEPROM_MATERIAL_COUNT_OFFSET());
if (count == EEPROM_MATERIAL_SETTINGS_MAX_COUNT)
count--;
lcd_scroll_menu(PSTR("PRESETS"), 2 + count, lcd_menu_material_settings_store_callback, lcd_menu_material_settings_store_details_callback);
if (lcd_lib_button_pressed)
{
if (!IS_SELECTED_SCROLL(0))
{
uint8_t idx = SELECTED_SCROLL_MENU_ITEM() - 1;
if (idx == count)
{
char buffer[9] = "CUSTOM";
int_to_string(idx - 1, buffer + 6);
eeprom_write_block(buffer, EEPROM_MATERIAL_NAME_OFFSET(idx), 8);
eeprom_write_byte(EEPROM_MATERIAL_COUNT_OFFSET(), idx + 1);
}
lcd_material_store_material(idx);
}
lcd_change_to_menu(lcd_menu_material_settings, SCROLL_MENU_ITEM_POS(6));
}
}
static void lcd_menu_material_settings_store()
{
uint8_t count = eeprom_read_byte(EEPROM_MATERIAL_COUNT_OFFSET());
if (count == EEPROM_MATERIAL_SETTINGS_MAX_COUNT)
count--;
lcd_scroll_menu(PSTR("PRESETS"), MATERIAL_PRESETS + count, lcd_menu_material_settings_store_callback, lcd_menu_material_settings_store_details_callback);
if (lcd_lib_button_pressed)
{
if (!IS_SELECTED_SCROLL(0))
{
uint8_t idx = SELECTED_SCROLL_MENU_ITEM() - 1;
if (idx == count)
{
makeCustomName(idx);
eeprom_write_block(material_name_buf, EEPROM_MATERIAL_NAME_OFFSET(idx), MATERIAL_NAME_LENGTH);
eeprom_write_byte(EEPROM_MATERIAL_COUNT_OFFSET(), idx + 1);
}
lcd_material_store_material(idx);
lcd_lib_beep_ext (600,100);
}
lcd_change_to_menu(lcd_menu_material_settings, SCROLL_MENU_ITEM_POS(6));
}
}
void lcd_menu_print_select()
{
if (!card.sdInserted)
{
LED_GLOW();
lcd_lib_encoder_pos = MAIN_MENU_ITEM_POS(0);
lcd_info_screen(lcd_menu_main);
lcd_lib_draw_string_centerP(15, PSTR("No SD-CARD!"));
lcd_lib_draw_string_centerP(25, PSTR("Please insert card"));
lcd_lib_update_screen();
card.release();
return;
}
if (!card.isOk())
{
lcd_info_screen(lcd_menu_main);
lcd_lib_draw_string_centerP(16, PSTR("Reading card..."));
lcd_lib_update_screen();
lcd_clear_cache();
card.initsd();
return;
}
if (LCD_CACHE_NR_OF_FILES() == 0xFF)
LCD_CACHE_NR_OF_FILES() = card.getnrfilenames();
if (card.errorCode())
{
LCD_CACHE_NR_OF_FILES() = 0xFF;
return;
}
uint8_t nrOfFiles = LCD_CACHE_NR_OF_FILES();
if (nrOfFiles == 0)
{
if (card.atRoot())
lcd_info_screen(lcd_menu_main, NULL, PSTR("OK"));
else
lcd_info_screen(lcd_menu_print_select, cardUpdir, PSTR("OK"));
lcd_lib_draw_string_centerP(25, PSTR("No files found!"));
lcd_lib_update_screen();
lcd_clear_cache();
return;
}
if (lcd_lib_button_pressed)
{
uint8_t selIndex = uint16_t(SELECTED_SCROLL_MENU_ITEM());
if (selIndex == 0)
{
if (card.atRoot())
{
lcd_change_to_menu(lcd_menu_main);
}else{
lcd_clear_cache();
lcd_lib_beep();
card.updir();
}
}else{
card.getfilename(selIndex - 1);
if (!card.filenameIsDir)
{
//Start print
active_extruder = 0;
card.openFile(card.filename, true);
if (card.isFileOpen() && !is_command_queued())
{
if (led_mode == LED_MODE_WHILE_PRINTING || led_mode == LED_MODE_BLINK_ON_DONE)
analogWrite(LED_PIN, 255 * int(led_brightness_level) / 100);
if (!card.longFilename[0])
strcpy(card.longFilename, card.filename);
card.longFilename[20] = '\0';
if (strchr(card.longFilename, '.')) strchr(card.longFilename, '.')[0] = '\0';
char buffer[64];
card.fgets(buffer, sizeof(buffer));
buffer[sizeof(buffer)-1] = '\0';
while (strlen(buffer) > 0 && buffer[strlen(buffer)-1] < ' ') buffer[strlen(buffer)-1] = '\0';
if (strcmp_P(buffer, PSTR(";FLAVOR:UltiGCode")) != 0)
{
card.fgets(buffer, sizeof(buffer));
buffer[sizeof(buffer)-1] = '\0';
while (strlen(buffer) > 0 && buffer[strlen(buffer)-1] < ' ') buffer[strlen(buffer)-1] = '\0';
}
card.setIndex(0);
if (strcmp_P(buffer, PSTR(";FLAVOR:UltiGCode")) == 0)
{
//New style GCode flavor without start/end code.
// Temperature settings, filament settings, fan settings, start and end-code are machine controlled.
target_temperature_bed = 0;
fanSpeedPercent = 0;
for(uint8_t e=0; e<EXTRUDERS; e++)
{
if (LCD_DETAIL_CACHE_MATERIAL(e) < 1)
continue;
target_temperature[e] = 0;//material[e].temperature;
target_temperature_bed = max(target_temperature_bed, material[e].bed_temperature);
fanSpeedPercent = max(fanSpeedPercent, material[0].fan_speed);
volume_to_filament_length[e] = 1.0 / (M_PI * (material[e].diameter / 2.0) * (material[e].diameter / 2.0));
extrudemultiply[e] = material[e].flow;
}
fanSpeed = 0;
enquecommand_P(PSTR("G28"));
enquecommand_P(PSTR("G1 F12000 X5 Y10"));
lcd_change_to_menu(lcd_menu_print_heatup);
}else{
//Classic gcode file
//Set the settings to defaults so the classic GCode has full control
fanSpeedPercent = 100;
for(uint8_t e=0; e<EXTRUDERS; e++)
{
volume_to_filament_length[e] = 1.0;
extrudemultiply[e] = 100;
}
lcd_change_to_menu(lcd_menu_print_classic_warning, MAIN_MENU_ITEM_POS(0));
}
}
}else{
lcd_lib_beep();
lcd_clear_cache();
card.chdir(card.filename);
SELECT_SCROLL_MENU_ITEM(0);
}
return;//Return so we do not continue after changing the directory or selecting a file. The nrOfFiles is invalid at this point.
}
}
lcd_scroll_menu(PSTR("SD CARD"), nrOfFiles+1, lcd_sd_menu_filename_callback, lcd_sd_menu_details_callback);
}