/**
* Connect a pcb contained inside a netconn
* Called from netconn_connect.
*
* @param msg the api_msg_msg pointing to the connection and containing
* the IP address and port to connect to
*/
void
lwip_netconn_do_connect(struct api_msg_msg *msg)
{
if (msg->conn->pcb.tcp == NULL) {
/* This may happen when calling netconn_connect() a second time */
msg->err = ERR_CLSD;
if (NETCONNTYPE_GROUP(msg->conn->type) == NETCONN_TCP) {
/* For TCP, netconn_connect() calls tcpip_apimsg(), so signal op_completed here. */
sys_sem_signal(&msg->conn->op_completed);
return;
}
} else {
switch (NETCONNTYPE_GROUP(msg->conn->type)) {
#if LWIP_RAW
case NETCONN_RAW:
msg->err = raw_connect(msg->conn->pcb.raw, API_EXPR_REF(msg->msg.bc.ipaddr));
break;
#endif /* LWIP_RAW */
#if LWIP_UDP
case NETCONN_UDP:
msg->err = udp_connect(msg->conn->pcb.udp, API_EXPR_REF(msg->msg.bc.ipaddr), msg->msg.bc.port);
break;
#endif /* LWIP_UDP */
#if LWIP_TCP
case NETCONN_TCP:
/* Prevent connect while doing any other action. */
if (msg->conn->state != NETCONN_NONE) {
msg->err = ERR_ISCONN;
} else {
setup_tcp(msg->conn);
msg->err = tcp_connect(msg->conn->pcb.tcp, API_EXPR_REF(msg->msg.bc.ipaddr),
msg->msg.bc.port, lwip_netconn_do_connected);
if (msg->err == ERR_OK) {
u8_t non_blocking = netconn_is_nonblocking(msg->conn);
msg->conn->state = NETCONN_CONNECT;
SET_NONBLOCKING_CONNECT(msg->conn, non_blocking);
if (non_blocking) {
msg->err = ERR_INPROGRESS;
} else {
msg->conn->current_msg = msg;
/* sys_sem_signal() is called from lwip_netconn_do_connected (or err_tcp()),
* when the connection is established! */
return;
}
}
}
/* For TCP, netconn_connect() calls tcpip_apimsg(), so signal op_completed here. */
sys_sem_signal(&msg->conn->op_completed);
return;
#endif /* LWIP_TCP */
default:
LWIP_ERROR("Invalid netconn type", 0, do{ msg->err = ERR_VAL; }while(0));
break;
}
}
/* For all other protocols, netconn_connect() calls TCPIP_APIMSG(),
so use TCPIP_APIMSG_ACK() here. */
TCPIP_APIMSG_ACK(msg);
}
/**
* Connect a pcb contained inside a netconn
* Called from netconn_connect.
*
* @param msg the api_msg_msg pointing to the connection and containing
* the IP address and port to connect to
*/
void
do_connect(struct api_msg_msg *msg)
{
if (msg->conn->pcb.tcp == NULL) {
/* This may happen when calling netconn_connect() a second time */
msg->err = ERR_CLSD;
} else {
switch (NETCONNTYPE_GROUP(msg->conn->type)) {
#if LWIP_RAW
case NETCONN_RAW:
msg->err = raw_connect(msg->conn->pcb.raw, msg->msg.bc.ipaddr);
break;
#endif /* LWIP_RAW */
#if LWIP_UDP
case NETCONN_UDP:
msg->err = udp_connect(msg->conn->pcb.udp, msg->msg.bc.ipaddr, msg->msg.bc.port);
break;
#endif /* LWIP_UDP */
#if LWIP_TCP
case NETCONN_TCP:
/* Prevent connect while doing any other action. */
if (msg->conn->state != NETCONN_NONE) {
msg->err = ERR_ISCONN;
} else {
setup_tcp(msg->conn);
msg->err = tcp_connect(msg->conn->pcb.tcp, msg->msg.bc.ipaddr,
msg->msg.bc.port, do_connected);
if (msg->err == ERR_OK) {
u8_t non_blocking = netconn_is_nonblocking(msg->conn);
msg->conn->state = NETCONN_CONNECT;
SET_NONBLOCKING_CONNECT(msg->conn, non_blocking);
if (non_blocking) {
msg->err = ERR_WOULDBLOCK/*ERR_INPROGRESS*/;
} else {
msg->conn->current_msg = msg;
/* sys_sem_signal() is called from do_connected (or err_tcp()),
* when the connection is established! */
return;
}
}
}
break;
#endif /* LWIP_TCP */
default:
LWIP_ERROR("Invalid netconn type", 0, do{ msg->err = ERR_VAL; }while(0));
break;
}
}
sys_sem_signal(&msg->conn->op_completed);
}
/**
* TCP callback function if a connection (opened by tcp_connect/do_connect) has
* been established (or reset by the remote host).
*
* @see tcp.h (struct tcp_pcb.connected) for parameters and return values
*/
static err_t
do_connected(void *arg, struct tcp_pcb *pcb, err_t err)
{
struct netconn *conn;
int was_blocking;
LWIP_UNUSED_ARG(pcb);
conn = (struct netconn *)arg;
if (conn == NULL) {
return ERR_VAL;
}
LWIP_ASSERT("conn->state == NETCONN_CONNECT", conn->state == NETCONN_CONNECT);
LWIP_ASSERT("(conn->current_msg != NULL) || conn->in_non_blocking_connect",
(conn->current_msg != NULL) || IN_NONBLOCKING_CONNECT(conn));
if (conn->current_msg != NULL) {
conn->current_msg->err = err;
}
if ((conn->type == NETCONN_TCP) && (err == ERR_OK)) {
setup_tcp(conn);
}
was_blocking = !IN_NONBLOCKING_CONNECT(conn);
SET_NONBLOCKING_CONNECT(conn, 0);
conn->current_msg = NULL;
conn->state = NETCONN_NONE;
if (!was_blocking) {
SYS_ARCH_DECL_PROTECT(lev);
SYS_ARCH_PROTECT(lev);
if (conn->last_err == ERR_INPROGRESS) {
conn->last_err = ERR_OK;
}
SYS_ARCH_UNPROTECT(lev);
}
API_EVENT(conn, NETCONN_EVT_SENDPLUS, 0);
if (was_blocking) {
sys_sem_signal(&conn->op_completed);
}
return ERR_OK;
}
/**
* TCP callback function if a connection (opened by tcp_connect/lwip_netconn_do_connect) has
* been established (or reset by the remote host).
*
* @see tcp.h (struct tcp_pcb.connected) for parameters and return values
*/
static err_t
lwip_netconn_do_connected(void *arg, struct tcp_pcb *pcb, err_t err)
{
struct netconn *conn;
int was_blocking;
sys_sem_t* op_completed_sem = NULL;
LWIP_UNUSED_ARG(pcb);
conn = (struct netconn *)arg;
if (conn == NULL) {
return ERR_VAL;
}
LWIP_ASSERT("conn->state == NETCONN_CONNECT", conn->state == NETCONN_CONNECT);
LWIP_ASSERT("(conn->current_msg != NULL) || conn->in_non_blocking_connect",
(conn->current_msg != NULL) || IN_NONBLOCKING_CONNECT(conn));
if (conn->current_msg != NULL) {
conn->current_msg->err = err;
op_completed_sem = LWIP_API_MSG_SEM(conn->current_msg);
}
if ((NETCONNTYPE_GROUP(conn->type) == NETCONN_TCP) && (err == ERR_OK)) {
setup_tcp(conn);
}
was_blocking = !IN_NONBLOCKING_CONNECT(conn);
SET_NONBLOCKING_CONNECT(conn, 0);
LWIP_ASSERT("blocking connect state error",
(was_blocking && op_completed_sem != NULL) ||
(!was_blocking && op_completed_sem == NULL));
conn->current_msg = NULL;
conn->state = NETCONN_NONE;
if (!was_blocking) {
NETCONN_SET_SAFE_ERR(conn, ERR_OK);
}
API_EVENT(conn, NETCONN_EVT_SENDPLUS, 0);
if (was_blocking) {
sys_sem_signal(op_completed_sem);
}
return ERR_OK;
}
/**
* TCP callback function if a connection (opened by tcp_connect/do_connect) has
* been established (or reset by the remote host).
*
* @see tcp.h (struct tcp_pcb.connected) for parameters and return values
*/
static err_t
do_connected(void *arg, struct tcp_pcb *pcb, err_t err)
{
struct netconn *conn;
int was_blocking;
LWIP_UNUSED_ARG(pcb);
conn = (struct netconn *)arg;
if (conn == NULL) {
return ERR_VAL;
}
LWIP_ASSERT("conn->state == NETCONN_CONNECT", conn->state == NETCONN_CONNECT);
LWIP_ASSERT("(conn->current_msg != NULL) || conn->in_non_blocking_connect",
(conn->current_msg != NULL) || IN_NONBLOCKING_CONNECT(conn));
if (conn->current_msg != NULL) {
conn->current_msg->err = err;
}
if ((conn->type == NETCONN_TCP) && (err == ERR_OK)) {
setup_tcp(conn);
}
was_blocking = !IN_NONBLOCKING_CONNECT(conn);
SET_NONBLOCKING_CONNECT(conn, 0);
conn->current_msg = NULL;
conn->state = NETCONN_NONE;
if (!was_blocking) {
NETCONN_SET_SAFE_ERR(conn, ERR_OK);
}
API_EVENT(conn, NETCONN_EVT_SENDPLUS, 0);
if (was_blocking) {
conn_op_completed(conn);
}
return ERR_OK;
}
/**
* Receive callback function for UDP netconns.
* Posts the packet to conn->recvmbox or deletes it on memory error.
*
* @see udp.h (struct udp_pcb.recv) for parameters
*/
static void
recv_udp(void *arg, struct udp_pcb *pcb, struct pbuf *p,
ip_addr_t *addr, u16_t port)
{
struct netbuf *buf;
struct netconn *conn;
u16_t len;
#if LWIP_SO_RCVBUF
int recv_avail;
#endif /* LWIP_SO_RCVBUF */
LWIP_UNUSED_ARG(pcb); /* only used for asserts... */
LWIP_ASSERT("recv_udp must have a pcb argument", pcb != NULL);
LWIP_ASSERT("recv_udp must have an argument", arg != NULL);
conn = (struct netconn *)arg;
LWIP_ASSERT("recv_udp: recv for wrong pcb!", conn->pcb.udp == pcb);
#if LWIP_SO_RCVBUF
SYS_ARCH_GET(conn->recv_avail, recv_avail);
if ((conn == NULL) || !sys_mbox_valid(&conn->recvmbox) ||
((recv_avail + (int)(p->tot_len)) > conn->recv_bufsize)) {
#else /* LWIP_SO_RCVBUF */
if ((conn == NULL) || !sys_mbox_valid(&conn->recvmbox)) {
#endif /* LWIP_SO_RCVBUF */
pbuf_free(p);
return;
}
buf = (struct netbuf *)memp_malloc(MEMP_NETBUF);
if (buf == NULL) {
pbuf_free(p);
return;
} else {
buf->p = p;
buf->ptr = p;
ip_addr_set(&buf->addr, addr);
buf->port = port;
#if LWIP_NETBUF_RECVINFO
{
const struct ip_hdr* iphdr = ip_current_header();
/* get the UDP header - always in the first pbuf, ensured by udp_input */
const struct udp_hdr* udphdr = (void*)(((char*)iphdr) + IPH_LEN(iphdr));
#if LWIP_CHECKSUM_ON_COPY
buf->flags = NETBUF_FLAG_DESTADDR;
#endif /* LWIP_CHECKSUM_ON_COPY */
ip_addr_set(&buf->toaddr, ip_current_dest_addr());
buf->toport_chksum = udphdr->dest;
}
#endif /* LWIP_NETBUF_RECVINFO */
}
len = p->tot_len;
if (sys_mbox_trypost(&conn->recvmbox, buf) != ERR_OK) {
netbuf_delete(buf);
return;
} else {
#if LWIP_SO_RCVBUF
SYS_ARCH_INC(conn->recv_avail, len);
#endif /* LWIP_SO_RCVBUF */
/* Register event with callback */
API_EVENT(conn, NETCONN_EVT_RCVPLUS, len);
}
}
#endif /* LWIP_UDP */
#if LWIP_TCP
/**
* Receive callback function for TCP netconns.
* Posts the packet to conn->recvmbox, but doesn't delete it on errors.
*
* @see tcp.h (struct tcp_pcb.recv) for parameters and return value
*/
static err_t
recv_tcp(void *arg, struct tcp_pcb *pcb, struct pbuf *p, err_t err)
{
struct netconn *conn;
u16_t len;
LWIP_UNUSED_ARG(pcb);
LWIP_ASSERT("recv_tcp must have a pcb argument", pcb != NULL);
LWIP_ASSERT("recv_tcp must have an argument", arg != NULL);
conn = (struct netconn *)arg;
LWIP_ASSERT("recv_tcp: recv for wrong pcb!", conn->pcb.tcp == pcb);
if (conn == NULL) {
return ERR_VAL;
}
if (!sys_mbox_valid(&conn->recvmbox)) {
/* recvmbox already deleted */
if (p != NULL) {
tcp_recved(pcb, p->tot_len);
pbuf_free(p);
}
return ERR_OK;
}
/* Unlike for UDP or RAW pcbs, don't check for available space
using recv_avail since that could break the connection
(data is already ACKed) */
/* don't overwrite fatal errors! */
NETCONN_SET_SAFE_ERR(conn, err);
if (p != NULL) {
len = p->tot_len;
} else {
len = 0;
}
if (sys_mbox_trypost(&conn->recvmbox, p) != ERR_OK) {
/* don't deallocate p: it is presented to us later again from tcp_fasttmr! */
return ERR_MEM;
} else {
#if LWIP_SO_RCVBUF
SYS_ARCH_INC(conn->recv_avail, len);
#endif /* LWIP_SO_RCVBUF */
/* Register event with callback */
API_EVENT(conn, NETCONN_EVT_RCVPLUS, len);
}
return ERR_OK;
}
/**
* Poll callback function for TCP netconns.
* Wakes up an application thread that waits for a connection to close
* or data to be sent. The application thread then takes the
* appropriate action to go on.
*
* Signals the conn->sem.
* netconn_close waits for conn->sem if closing failed.
*
* @see tcp.h (struct tcp_pcb.poll) for parameters and return value
*/
static err_t
poll_tcp(void *arg, struct tcp_pcb *pcb)
{
struct netconn *conn = (struct netconn *)arg;
LWIP_UNUSED_ARG(pcb);
LWIP_ASSERT("conn != NULL", (conn != NULL));
if (conn->state == NETCONN_WRITE) {
do_writemore(conn);
} else if (conn->state == NETCONN_CLOSE) {
do_close_internal(conn);
}
/* @todo: implement connect timeout here? */
/* Did a nonblocking write fail before? Then check available write-space. */
if (conn->flags & NETCONN_FLAG_CHECK_WRITESPACE) {
/* If the queued byte- or pbuf-count drops below the configured low-water limit,
let select mark this pcb as writable again. */
if ((conn->pcb.tcp != NULL) && (tcp_sndbuf(conn->pcb.tcp) > TCP_SNDLOWAT) &&
(tcp_sndqueuelen(conn->pcb.tcp) < TCP_SNDQUEUELOWAT)) {
conn->flags &= ~NETCONN_FLAG_CHECK_WRITESPACE;
API_EVENT(conn, NETCONN_EVT_SENDPLUS, 0);
}
}
return ERR_OK;
}
/**
* Sent callback function for TCP netconns.
* Signals the conn->sem and calls API_EVENT.
* netconn_write waits for conn->sem if send buffer is low.
*
* @see tcp.h (struct tcp_pcb.sent) for parameters and return value
*/
static err_t
sent_tcp(void *arg, struct tcp_pcb *pcb, u16_t len)
{
struct netconn *conn = (struct netconn *)arg;
LWIP_UNUSED_ARG(pcb);
LWIP_ASSERT("conn != NULL", (conn != NULL));
if (conn->state == NETCONN_WRITE) {
do_writemore(conn);
} else if (conn->state == NETCONN_CLOSE) {
do_close_internal(conn);
}
if (conn) {
/* If the queued byte- or pbuf-count drops below the configured low-water limit,
let select mark this pcb as writable again. */
if ((conn->pcb.tcp != NULL) && (tcp_sndbuf(conn->pcb.tcp) > TCP_SNDLOWAT) &&
(tcp_sndqueuelen(conn->pcb.tcp) < TCP_SNDQUEUELOWAT)) {
conn->flags &= ~NETCONN_FLAG_CHECK_WRITESPACE;
API_EVENT(conn, NETCONN_EVT_SENDPLUS, len);
}
}
return ERR_OK;
}
/**
* Error callback function for TCP netconns.
* Signals conn->sem, posts to all conn mboxes and calls API_EVENT.
* The application thread has then to decide what to do.
*
* @see tcp.h (struct tcp_pcb.err) for parameters
*/
static void
err_tcp(void *arg, err_t err)
{
struct netconn *conn;
enum netconn_state old_state;
SYS_ARCH_DECL_PROTECT(lev);
conn = (struct netconn *)arg;
LWIP_ASSERT("conn != NULL", (conn != NULL));
conn->pcb.tcp = NULL;
/* no check since this is always fatal! */
SYS_ARCH_PROTECT(lev);
conn->last_err = err;
SYS_ARCH_UNPROTECT(lev);
/* reset conn->state now before waking up other threads */
old_state = conn->state;
conn->state = NETCONN_NONE;
/* Notify the user layer about a connection error. Used to signal
select. */
API_EVENT(conn, NETCONN_EVT_ERROR, 0);
/* Try to release selects pending on 'read' or 'write', too.
They will get an error if they actually try to read or write. */
API_EVENT(conn, NETCONN_EVT_RCVPLUS, 0);
API_EVENT(conn, NETCONN_EVT_SENDPLUS, 0);
/* pass NULL-message to recvmbox to wake up pending recv */
if (sys_mbox_valid(&conn->recvmbox)) {
/* use trypost to prevent deadlock */
sys_mbox_trypost(&conn->recvmbox, NULL);
}
/* pass NULL-message to acceptmbox to wake up pending accept */
if (sys_mbox_valid(&conn->acceptmbox)) {
/* use trypost to preven deadlock */
sys_mbox_trypost(&conn->acceptmbox, NULL);
}
if ((old_state == NETCONN_WRITE) || (old_state == NETCONN_CLOSE) ||
(old_state == NETCONN_CONNECT)) {
/* calling do_writemore/do_close_internal is not necessary
since the pcb has already been deleted! */
int was_nonblocking_connect = IN_NONBLOCKING_CONNECT(conn);
SET_NONBLOCKING_CONNECT(conn, 0);
if (!was_nonblocking_connect) {
/* set error return code */
LWIP_ASSERT("conn->current_msg != NULL", conn->current_msg != NULL);
conn->current_msg->err = err;
conn->current_msg = NULL;
/* wake up the waiting task */
sys_sem_signal(&conn->op_completed);
}
} else {
LWIP_ASSERT("conn->current_msg == NULL", conn->current_msg == NULL);
}
}
/**
* Setup a tcp_pcb with the correct callback function pointers
* and their arguments.
*
* @param conn the TCP netconn to setup
*/
static void
setup_tcp(struct netconn *conn)
{
struct tcp_pcb *pcb;
pcb = conn->pcb.tcp;
tcp_arg(pcb, conn);
tcp_recv(pcb, recv_tcp);
tcp_sent(pcb, sent_tcp);
tcp_poll(pcb, poll_tcp, 4);
tcp_err(pcb, err_tcp);
}
/**
* Accept callback function for TCP netconns.
* Allocates a new netconn and posts that to conn->acceptmbox.
*
* @see tcp.h (struct tcp_pcb_listen.accept) for parameters and return value
*/
static err_t
accept_function(void *arg, struct tcp_pcb *newpcb, err_t err)
{
struct netconn *newconn;
struct netconn *conn = (struct netconn *)arg;
LWIP_DEBUGF(API_MSG_DEBUG, ("accept_function: newpcb->tate: %s\n", tcp_debug_state_str(newpcb->state)));
if (!sys_mbox_valid(&conn->acceptmbox)) {
LWIP_DEBUGF(API_MSG_DEBUG, ("accept_function: acceptmbox already deleted\n"));
return ERR_VAL;
}
/* We have to set the callback here even though
* the new socket is unknown. conn->socket is marked as -1. */
newconn = netconn_alloc(conn->type, conn->callback);
if (newconn == NULL) {
return ERR_MEM;
}
newconn->pcb.tcp = newpcb;
setup_tcp(newconn);
/* no protection: when creating the pcb, the netconn is not yet known
to the application thread */
newconn->last_err = err;
if (sys_mbox_trypost(&conn->acceptmbox, newconn) != ERR_OK) {
/* When returning != ERR_OK, the pcb is aborted in tcp_process(),
so do nothing here! */
/* remove all references to this netconn from the pcb */
struct tcp_pcb* pcb = newconn->pcb.tcp;
tcp_arg(pcb, NULL);
tcp_recv(pcb, NULL);
tcp_sent(pcb, NULL);
tcp_poll(pcb, NULL, 4);
tcp_err(pcb, NULL);
/* remove reference from to the pcb from this netconn */
newconn->pcb.tcp = NULL;
/* no need to drain since we know the recvmbox is empty. */
sys_mbox_free(&newconn->recvmbox);
sys_mbox_set_invalid(&newconn->recvmbox);
netconn_free(newconn);
return ERR_MEM;
} else {
/* Register event with callback */
API_EVENT(conn, NETCONN_EVT_RCVPLUS, 0);
}
return ERR_OK;
}
#endif /* LWIP_TCP */
/**
* Create a new pcb of a specific type.
* Called from do_newconn().
*
* @param msg the api_msg_msg describing the connection type
* @return msg->conn->err, but the return value is currently ignored
*/
static void
pcb_new(struct api_msg_msg *msg)
{
LWIP_ASSERT("pcb_new: pcb already allocated", msg->conn->pcb.tcp == NULL);
/* Allocate a PCB for this connection */
switch(NETCONNTYPE_GROUP(msg->conn->type)) {
#if LWIP_RAW
case NETCONN_RAW:
msg->conn->pcb.raw = raw_new(msg->msg.n.proto);
if(msg->conn->pcb.raw == NULL) {
msg->err = ERR_MEM;
break;
}
raw_recv(msg->conn->pcb.raw, recv_raw, msg->conn);
break;
#endif /* LWIP_RAW */
#if LWIP_UDP
case NETCONN_UDP:
msg->conn->pcb.udp = udp_new();
if(msg->conn->pcb.udp == NULL) {
msg->err = ERR_MEM;
break;
}
#if LWIP_UDPLITE
if (msg->conn->type==NETCONN_UDPLITE) {
udp_setflags(msg->conn->pcb.udp, UDP_FLAGS_UDPLITE);
}
#endif /* LWIP_UDPLITE */
if (msg->conn->type==NETCONN_UDPNOCHKSUM) {
udp_setflags(msg->conn->pcb.udp, UDP_FLAGS_NOCHKSUM);
}
udp_recv(msg->conn->pcb.udp, recv_udp, msg->conn);
break;
#endif /* LWIP_UDP */
#if LWIP_TCP
case NETCONN_TCP:
msg->conn->pcb.tcp = tcp_new();
if(msg->conn->pcb.tcp == NULL) {
msg->err = ERR_MEM;
break;
}
setup_tcp(msg->conn);
break;
#endif /* LWIP_TCP */
default:
/* Unsupported netconn type, e.g. protocol disabled */
msg->err = ERR_VAL;
break;
}
}
