int ResetTarget(void)
{
SWJ_WriteAP(MDM_CTRL, 0x08);
DelayMs(10);
SWJ_SetTargetState(RESET_RUN);
DelayMs(10);
}
uint8_t TFlash_UnlockSequence(void)
{
uint32_t val, i;
/* verify the result */
SWJ_ReadAP(MDM_IDR, &val);
if ((val != KINETIS_KK_MCU_ID) && (val != KINETIS_KL_MCU_ID))
{
printf("MCU_ID does not match!0x%X\r\n", val);
return 1;
}
SWJ_ReadAP(MDM_STATUS, &val);
/* flash in secured mode */
if (val & (1 << 2))
{
printf("system is secured mode\r\n");
/* hold the device in reset */
SWJ_SetTargetState(RESET_HOLD);
// SWJ_WriteAP(MDM_CTRL, 0x08);
// DelayMs(20);
// SWJ_SetTargetState(RESET_RUN);
// SWJ_InitDebug();
// SWJ_SetTargetState(RESET_HOLD);
/* write the mass-erase enable bit */
if(SWJ_WriteAP(MDM_CTRL, 1))
{
printf("write mass erase enable failed\r\n");
return 1;
}
SWJ_ReadAP(MDM_CTRL, &val);
printf("MDM_CTRL:0x%X\r\n", MDM_CTRL);
while (1)
{
/* wait until mass erase is started */
if(SWJ_ReadAP(MDM_STATUS, &val))
{
printf("read satatus failed\r\n");
return 2;
}
if (val & 1) break;
}
/* mass erase in progress */
while (1)
{
/* keep reading until procedure is complete */
if(SWJ_ReadAP(MDM_CTRL, &val))
return 3;
if (val == 0)
break;
}
}
return 0;
}
uint8_t TFlash_UnlockSequence(void)
{
uint32_t val;
/* read the device ID */
if(SWJ_ReadAP(MDM_IDR, &val))
{
printf("readID failed:0x%08X\r\n", val);
return 1;
}
/* verify the result */
if ((val != KINETIS_KK_MCU_ID) && (val != KINETIS_KL_MCU_ID))
{
printf("MCU_ID does not match!0x%X\r\n", val);
return 1;
}
if(SWJ_ReadAP(MDM_STATUS, &val))
{
printf("read mem_status error\r\n");
return 3;
}
printf("MEMSTATUS:0x%X\r\n", val);
/* flash in secured mode */
// if (val & (1 << 2))
{
printf("system is secured mode\r\n");
/* hold the device in reset */
//SWJ_SetTargetState(RESET_PROGRAM);
SWJ_SetTargetState(RESET_HOLD);
/* write the mass-erase enable bit */
if(SWJ_WriteAP(MDM_CTRL, 1))
{
printf("write enable failed\r\n");
return 1;
}
while (1)
{
//SWJ_WriteAP(MDM_CTRL, 1);
/* wait until mass erase is started */
if(SWJ_ReadAP(MDM_STATUS, &val))
{
printf("read satatus failed\r\n");
return 2;
}
if (val & 1) break;
}
/* mass erase in progress */
while (1)
{
/* keep reading until procedure is complete */
if(SWJ_ReadAP(MDM_CTRL, &val))
return 3;
if (val == 0)
break;
}
}
return 0;
}
