DIALOG_SHIM::DIALOG_SHIM( wxWindow* aParent, wxWindowID id, const wxString& title,
const wxPoint& pos, const wxSize& size, long style, const wxString& name ) :
wxDialog( aParent, id, title, pos, size, style, name ),
KIWAY_HOLDER( 0 ),
m_qmodal_loop( 0 ),
m_qmodal_showing( false ),
m_qmodal_parent_disabler( 0 )
{
// pray that aParent is either a KIWAY_PLAYER or DIALOG_SHIM derivation.
KIWAY_HOLDER* h = dynamic_cast<KIWAY_HOLDER*>( aParent );
// wxASSERT_MSG( h, wxT( "DIALOG_SHIM's parent is NULL or not derived from KIWAY_PLAYER nor DIALOG_SHIM" ) );
if( h )
SetKiway( this, &h->Kiway() );
#ifdef __WINDOWS__
// On Windows, the app top windows can be brought to the foreground
// (at least temporary) in certain circumstances,
// for instance when calling an external tool in Eeschema boom generation.
// So set the parent KIWAY_PLAYER kicad frame (if exists) to top window
// to avoid this annoying behavior
KIWAY_PLAYER* parent_kiwayplayer = dynamic_cast<KIWAY_PLAYER*>( aParent );
if( parent_kiwayplayer )
Pgm().App().SetTopWindow( parent_kiwayplayer );
#endif
#if DLGSHIM_USE_SETFOCUS
Connect( wxEVT_INIT_DIALOG, wxInitDialogEventHandler( DIALOG_SHIM::onInit ) );
#endif
}
DIALOG_SHIM::DIALOG_SHIM( wxWindow* aParent, wxWindowID id, const wxString& title,
const wxPoint& pos, const wxSize& size, long style, const wxString& name ) :
wxDialog( aParent, id, title, pos, size, style, name ),
KIWAY_HOLDER( 0 ),
m_qmodal_loop( 0 ),
m_qmodal_showing( false ),
m_qmodal_parent_disabler( 0 )
{
// pray that aParent is either a KIWAY_PLAYER or DIALOG_SHIM derivation.
KIWAY_HOLDER* h = dynamic_cast<KIWAY_HOLDER*>( aParent );
// wxASSERT_MSG( h, wxT( "DIALOG_SHIM's parent is NULL or not derived from KIWAY_PLAYER nor DIALOG_SHIM" ) );
if( h )
SetKiway( this, &h->Kiway() );
#if DLGSHIM_USE_SETFOCUS
Connect( wxEVT_INIT_DIALOG, wxInitDialogEventHandler( DIALOG_SHIM::onInit ) );
#endif
}
SIM_PLOT_FRAME::SIM_PLOT_FRAME( KIWAY* aKiway, wxWindow* aParent )
: SIM_PLOT_FRAME_BASE( aParent ), m_lastSimPlot( nullptr )
{
SetKiway( this, aKiway );
m_signalsIconColorList = NULL;
m_schematicFrame = (SCH_EDIT_FRAME*) Kiway().Player( FRAME_SCH, false );
if( m_schematicFrame == NULL )
throw std::runtime_error( "There is no schematic window" );
// Give an icon
wxIcon icon;
icon.CopyFromBitmap( KiBitmap( simulator_xpm ) );
SetIcon( icon );
m_simulator = SPICE_SIMULATOR::CreateInstance( "ngspice" );
if( !m_simulator )
{
throw std::runtime_error( "Could not create simulator instance" );
return;
}
m_simulator->Init();
m_reporter = new SIM_THREAD_REPORTER( this );
m_simulator->SetReporter( m_reporter );
updateNetlistExporter();
Connect( wxEVT_CLOSE_WINDOW, wxCloseEventHandler( SIM_PLOT_FRAME::onClose ), NULL, this );
Connect( EVT_SIM_UPDATE, wxCommandEventHandler( SIM_PLOT_FRAME::onSimUpdate ), NULL, this );
Connect( EVT_SIM_REPORT, wxCommandEventHandler( SIM_PLOT_FRAME::onSimReport ), NULL, this );
Connect( EVT_SIM_STARTED, wxCommandEventHandler( SIM_PLOT_FRAME::onSimStarted ), NULL, this );
Connect( EVT_SIM_FINISHED, wxCommandEventHandler( SIM_PLOT_FRAME::onSimFinished ), NULL, this );
Connect( EVT_SIM_CURSOR_UPDATE, wxCommandEventHandler( SIM_PLOT_FRAME::onCursorUpdate ), NULL, this );
// Toolbar buttons
m_toolSimulate = m_toolBar->AddTool( ID_SIM_RUN, _( "Run/Stop Simulation" ),
KiBitmap( sim_run_xpm ), _( "Run Simulation" ), wxITEM_NORMAL );
m_toolAddSignals = m_toolBar->AddTool( ID_SIM_ADD_SIGNALS, _( "Add Signals" ),
KiBitmap( sim_add_signal_xpm ), _( "Add signals to plot" ), wxITEM_NORMAL );
m_toolProbe = m_toolBar->AddTool( ID_SIM_PROBE, _( "Probe" ),
KiBitmap( sim_probe_xpm ), _( "Probe signals on the schematic" ), wxITEM_NORMAL );
m_toolTune = m_toolBar->AddTool( ID_SIM_TUNE, _( "Tune" ),
KiBitmap( sim_tune_xpm ), _( "Tune component values" ), wxITEM_NORMAL );
m_toolSettings = m_toolBar->AddTool( wxID_ANY, _( "Settings" ),
KiBitmap( sim_settings_xpm ), _( "Simulation settings" ), wxITEM_NORMAL );
Connect( m_toolSimulate->GetId(), wxEVT_COMMAND_TOOL_CLICKED, wxCommandEventHandler( SIM_PLOT_FRAME::onSimulate ), NULL, this );
Connect( m_toolAddSignals->GetId(), wxEVT_COMMAND_TOOL_CLICKED, wxCommandEventHandler( SIM_PLOT_FRAME::onAddSignal ), NULL, this );
Connect( m_toolProbe->GetId(), wxEVT_COMMAND_TOOL_CLICKED, wxCommandEventHandler( SIM_PLOT_FRAME::onProbe ), NULL, this );
Connect( m_toolTune->GetId(), wxEVT_COMMAND_TOOL_CLICKED, wxCommandEventHandler( SIM_PLOT_FRAME::onTune ), NULL, this );
Connect( m_toolSettings->GetId(), wxEVT_COMMAND_TOOL_CLICKED, wxCommandEventHandler( SIM_PLOT_FRAME::onSettings ), NULL, this );
// Bind toolbar buttons event to existing menu event handlers, so they behave the same
Bind( wxEVT_COMMAND_MENU_SELECTED, &SIM_PLOT_FRAME::onSimulate, this, m_runSimulation->GetId() );
Bind( wxEVT_COMMAND_MENU_SELECTED, &SIM_PLOT_FRAME::onAddSignal, this, m_addSignals->GetId() );
Bind( wxEVT_COMMAND_MENU_SELECTED, &SIM_PLOT_FRAME::onProbe, this, m_probeSignals->GetId() );
Bind( wxEVT_COMMAND_MENU_SELECTED, &SIM_PLOT_FRAME::onTune, this, m_tuneValue->GetId() );
Bind( wxEVT_COMMAND_MENU_SELECTED, &SIM_PLOT_FRAME::onSettings, this, m_settings->GetId() );
m_toolBar->Realize();
m_plotNotebook->SetPageText( 0, _( "Welcome!" ) );
// the settings dialog will be created later, on demand.
// if created in the ctor, for some obscure reason, there is an issue
// on Windows: when open it, the simulator frame is sent to the background.
// instead of beeing behind the dialog frame (as it does)
m_settingsDlg = NULL;
}
SIM_PLOT_FRAME::SIM_PLOT_FRAME( KIWAY* aKiway, wxWindow* aParent )
: SIM_PLOT_FRAME_BASE( aParent ), m_lastSimPlot( nullptr )
{
SetKiway( this, aKiway );
m_signalsIconColorList = NULL;
m_schematicFrame = (SCH_EDIT_FRAME*) Kiway().Player( FRAME_SCH, false );
if( m_schematicFrame == NULL )
throw std::runtime_error( "There is no schematic window" );
// Give an icon
wxIcon icon;
icon.CopyFromBitmap( KiBitmap( simulator_xpm ) );
SetIcon( icon );
// Gives a minimal size
SetSizeHints( 500, 400, -1, -1, -1, -1 );
// Get the previous size and position of windows:
LoadSettings( config() );
m_simulator = SPICE_SIMULATOR::CreateInstance( "ngspice" );
if( !m_simulator )
{
throw std::runtime_error( "Could not create simulator instance" );
return;
}
m_simulator->Init();
if( m_savedWorkbooksPath.IsEmpty() )
{
m_savedWorkbooksPath = Prj().GetProjectPath();
}
m_reporter = new SIM_THREAD_REPORTER( this );
m_simulator->SetReporter( m_reporter );
updateNetlistExporter();
Connect( wxEVT_CLOSE_WINDOW, wxCloseEventHandler( SIM_PLOT_FRAME::onClose ), NULL, this );
Connect( EVT_SIM_UPDATE, wxCommandEventHandler( SIM_PLOT_FRAME::onSimUpdate ), NULL, this );
Connect( EVT_SIM_REPORT, wxCommandEventHandler( SIM_PLOT_FRAME::onSimReport ), NULL, this );
Connect( EVT_SIM_STARTED, wxCommandEventHandler( SIM_PLOT_FRAME::onSimStarted ), NULL, this );
Connect( EVT_SIM_FINISHED, wxCommandEventHandler( SIM_PLOT_FRAME::onSimFinished ), NULL, this );
Connect( EVT_SIM_CURSOR_UPDATE, wxCommandEventHandler( SIM_PLOT_FRAME::onCursorUpdate ), NULL, this );
// Toolbar buttons
m_toolSimulate = m_toolBar->AddTool( ID_SIM_RUN, _( "Run/Stop Simulation" ),
KiBitmap( sim_run_xpm ), _( "Run Simulation" ), wxITEM_NORMAL );
m_toolAddSignals = m_toolBar->AddTool( ID_SIM_ADD_SIGNALS, _( "Add Signals" ),
KiBitmap( sim_add_signal_xpm ), _( "Add signals to plot" ), wxITEM_NORMAL );
m_toolProbe = m_toolBar->AddTool( ID_SIM_PROBE, _( "Probe" ),
KiBitmap( sim_probe_xpm ), _( "Probe signals on the schematic" ), wxITEM_NORMAL );
m_toolTune = m_toolBar->AddTool( ID_SIM_TUNE, _( "Tune" ),
KiBitmap( sim_tune_xpm ), _( "Tune component values" ), wxITEM_NORMAL );
m_toolSettings = m_toolBar->AddTool( wxID_ANY, _( "Settings" ),
KiBitmap( sim_settings_xpm ), _( "Simulation settings" ), wxITEM_NORMAL );
Connect( m_toolSimulate->GetId(), wxEVT_COMMAND_TOOL_CLICKED,
wxCommandEventHandler( SIM_PLOT_FRAME::onSimulate ), NULL, this );
Connect( m_toolAddSignals->GetId(), wxEVT_COMMAND_TOOL_CLICKED,
wxCommandEventHandler( SIM_PLOT_FRAME::onAddSignal ), NULL, this );
Connect( m_toolProbe->GetId(), wxEVT_COMMAND_TOOL_CLICKED,
wxCommandEventHandler( SIM_PLOT_FRAME::onProbe ), NULL, this );
Connect( m_toolTune->GetId(), wxEVT_COMMAND_TOOL_CLICKED,
wxCommandEventHandler( SIM_PLOT_FRAME::onTune ), NULL, this );
Connect( m_toolSettings->GetId(), wxEVT_COMMAND_TOOL_CLICKED,
wxCommandEventHandler( SIM_PLOT_FRAME::onSettings ), NULL, this );
// Bind toolbar buttons event to existing menu event handlers, so they behave the same
Bind( wxEVT_COMMAND_MENU_SELECTED, &SIM_PLOT_FRAME::onSimulate, this, m_runSimulation->GetId() );
Bind( wxEVT_COMMAND_MENU_SELECTED, &SIM_PLOT_FRAME::onAddSignal, this, m_addSignals->GetId() );
Bind( wxEVT_COMMAND_MENU_SELECTED, &SIM_PLOT_FRAME::onProbe, this, m_probeSignals->GetId() );
Bind( wxEVT_COMMAND_MENU_SELECTED, &SIM_PLOT_FRAME::onTune, this, m_tuneValue->GetId() );
Bind( wxEVT_COMMAND_MENU_SELECTED, &SIM_PLOT_FRAME::onShowNetlist, this, m_showNetlist->GetId() );
Bind( wxEVT_COMMAND_MENU_SELECTED, &SIM_PLOT_FRAME::onSettings, this, m_settings->GetId() );
m_toolBar->Realize();
m_plotNotebook->SetPageText( 0, _( "Welcome!" ) );
// the settings dialog will be created later, on demand.
// if created in the ctor, for some obscure reason, there is an issue
// on Windows: when open it, the simulator frame is sent to the background.
// instead of being behind the dialog frame (as it does)
m_settingsDlg = NULL;
// resize the subwindows size. At least on Windows, calling wxSafeYield before
// resizing the subwindows forces the wxSplitWindows size events automatically generated
// by wxWidgets to be executed before our resize code.
// Otherwise, the changes made by setSubWindowsSashSize are overwritten by one these
// events
wxSafeYield();
setSubWindowsSashSize();
}
PCB_CALCULATOR_FRAME::PCB_CALCULATOR_FRAME( KIWAY* aKiway, wxWindow* aParent ) :
PCB_CALCULATOR_FRAME_BASE( aParent )
{
SetKiway( this, aKiway );
m_currTransLine = NULL;
m_currTransLineType = DEFAULT_TYPE;
m_currAttenuator = NULL;
m_RegulatorListChanged = false;
m_Config = GetNewConfig( Pgm().App().GetAppName() );
// Populate transline list ordered like in dialog menu list
const static TRANSLINE_TYPE_ID tltype_list[8] =
{
MICROSTRIP_TYPE, CPW_TYPE, GROUNDED_CPW_TYPE,
RECTWAVEGUIDE_TYPE, COAX_TYPE, C_MICROSTRIP_TYPE,
STRIPLINE_TYPE, TWISTEDPAIR_TYPE
};
for( int ii = 0; ii < 8; ii++ )
m_transline_list.push_back( new TRANSLINE_IDENT( tltype_list[ii] ) );
// Populate attenuator list ordered like in dialog menu list
m_attenuator_list.push_back( new ATTENUATOR_PI() );
m_attenuator_list.push_back( new ATTENUATOR_TEE() );
m_attenuator_list.push_back( new ATTENUATOR_BRIDGE() );
m_attenuator_list.push_back( new ATTENUATOR_SPLITTER() );
m_currAttenuator = m_attenuator_list[0];
ReadConfig();
ReadDataFile();
TranslineTypeSelection( m_currTransLineType );
m_TranslineSelection->SetSelection( m_currTransLineType );
TW_Init();
SetAttenuator( m_AttenuatorsSelection->GetSelection() );
ToleranceSelection( m_rbToleranceSelection->GetSelection() );
BoardClassesUpdateData( m_BoardClassesUnitsSelector->GetUnitScale() );
ElectricalSpacingUpdateData( m_ElectricalSpacingUnitsSelector->GetUnitScale() );
m_choiceRegulatorSelector->Append( m_RegulatorList.GetRegList() );
SelectLastSelectedRegulator();
// Give an icon
wxIcon icon;
icon.CopyFromBitmap( KiBitmap( icon_pcbcalculator_xpm ) );
SetIcon( icon );
GetSizer()->SetSizeHints( this );
// Set previous size and position
SetSize( m_FramePos.x, m_FramePos.y, m_FrameSize.x, m_FrameSize.y );
if( m_FramePos == wxDefaultPosition )
Centre();
}
