void USBD_IRQHandler(void)
{
    uint32_t u32IntSts = USBD_GET_INT_FLAG();
    uint32_t u32State = USBD_GET_BUS_STATE();

//------------------------------------------------------------------
    if (u32IntSts & USBD_INTSTS_FLDET)
    {
        // Floating detect
        USBD_CLR_INT_FLAG(USBD_INTSTS_FLDET);

        if (USBD_IS_ATTACHED())
        {
            /* USB Plug In */
            USBD_ENABLE_USB();
        }
        else
        {
            /* USB Un-plug */
            USBD_DISABLE_USB();
        }
    }

//------------------------------------------------------------------
    if (u32IntSts & USBD_INTSTS_BUS)
    {
        /* Clear event flag */
        USBD_CLR_INT_FLAG(USBD_INTSTS_BUS);

        if (u32State & USBD_STATE_USBRST)
        {
            /* Bus reset */
            USBD_ENABLE_USB();
            USBD_SwReset();
        }
        if (u32State & USBD_STATE_SUSPEND)
        {
            /* Enable USB but disable PHY */
            USBD_DISABLE_PHY();
        }
        if (u32State & USBD_STATE_RESUME)
        {
            /* Enable USB and enable PHY */
            USBD_ENABLE_USB();
        }
    }

//------------------------------------------------------------------
    if(u32IntSts & USBD_INTSTS_WAKEUP)
    {
        /* Clear event flag */
        USBD_CLR_INT_FLAG(USBD_INTSTS_WAKEUP);
    }

    if (u32IntSts & USBD_INTSTS_USB)
    {
        extern uint8_t g_usbd_SetupPacket[];
        // USB event
        if (u32IntSts & USBD_INTSTS_SETUP)
        {
            // Setup packet
            /* Clear event flag */
            USBD_CLR_INT_FLAG(USBD_INTSTS_SETUP);

            /* Clear the data IN/OUT ready flag of control end-points */
            USBD_STOP_TRANSACTION(EP0);
            USBD_STOP_TRANSACTION(EP1);

            USBD_ProcessSetupPacket();
        }

        // EP events
        if (u32IntSts & USBD_INTSTS_EP0)
        {
            /* Clear event flag */
            USBD_CLR_INT_FLAG(USBD_INTSTS_EP0);
            // control IN
            USBD_CtrlIn();
        }

        if (u32IntSts & USBD_INTSTS_EP1)
        {
            /* Clear event flag */
            USBD_CLR_INT_FLAG(USBD_INTSTS_EP1);

            // control OUT
            USBD_CtrlOut();

            if(g_usbd_SetupPacket[1] == SET_LINE_CODE)
            {
                if(g_usbd_SetupPacket[4] == 0)  /* VCOM-1 */
                    VCOM_LineCoding(0); /* Apply UART settings */
            }
        }

        if (u32IntSts & USBD_INTSTS_EP2)
        {
            /* Clear event flag */
            USBD_CLR_INT_FLAG(USBD_INTSTS_EP2);
            // Bulk IN
            EP2_Handler();
        }

        if (u32IntSts & USBD_INTSTS_EP3)
        {
            /* Clear event flag */
            USBD_CLR_INT_FLAG(USBD_INTSTS_EP3);
            // Bulk OUT
            EP3_Handler();
        }

        if (u32IntSts & USBD_INTSTS_EP4)
        {
            /* Clear event flag */
            USBD_CLR_INT_FLAG(USBD_INTSTS_EP4);
        }

        if (u32IntSts & USBD_INTSTS_EP5)
        {
            /* Clear event flag */
            USBD_CLR_INT_FLAG(USBD_INTSTS_EP5);
            // Interrupt IN
            EP5_Handler();
        }
    }
}
/*--------------------------------------------------------------------------*/
void USBD_IRQHandler(void)
{
    uint32_t u32IntSts = USBD_GET_INT_FLAG();
    uint32_t u32State = USBD_GET_BUS_STATE();

//------------------------------------------------------------------
    if (u32IntSts & USBD_INTSTS_FLDET)
    {
        // Floating detect
        USBD_CLR_INT_FLAG(USBD_INTSTS_FLDET);

        if (USBD_IS_ATTACHED())
        {
            /* USB Plug In */
            USBD_ENABLE_USB();
        }
        else
        {
            /* USB Un-plug */
            USBD_DISABLE_USB();
        }
    }

//------------------------------------------------------------------
    if (u32IntSts & USBD_INTSTS_BUS)
    {
        /* Clear event flag */
        USBD_CLR_INT_FLAG(USBD_INTSTS_BUS);

        if (u32State & USBD_STATE_USBRST)
        {
            /* Bus reset */
            USBD_ENABLE_USB();
            USBD_SwReset();
        }
        if (u32State & USBD_STATE_SUSPEND)
        {
            /* Enable USB but disable PHY */
            USBD_DISABLE_PHY();
        }
        if (u32State & USBD_STATE_RESUME)
        {
            /* Enable USB and enable PHY */
            USBD_ENABLE_USB();
        }
    }

//------------------------------------------------------------------
    if(u32IntSts & USBD_INTSTS_WAKEUP)
    {
        /* Clear event flag */
        USBD_CLR_INT_FLAG(USBD_INTSTS_WAKEUP);
    }

    if (u32IntSts & USBD_INTSTS_USB)
    {
        // USB event
        if (u32IntSts & USBD_INTSTS_SETUP)
        {
            // Setup packet
            /* Clear event flag */
            USBD_CLR_INT_FLAG(USBD_INTSTS_SETUP);

            /* Clear the data IN/OUT ready flag of control end-points */
            USBD_STOP_TRANSACTION(EP0);
            USBD_STOP_TRANSACTION(EP1);

            USBD_ProcessSetupPacket();
        }

        // EP events
        if (u32IntSts & USBD_INTSTS_EP0)
        {
            /* Clear event flag */
            USBD_CLR_INT_FLAG(USBD_INTSTS_EP0);

            // control IN
            USBD_CtrlIn();
        }

        if (u32IntSts & USBD_INTSTS_EP1)
        {
            /* Clear event flag */
            USBD_CLR_INT_FLAG(USBD_INTSTS_EP1);

            // control OUT
            USBD_CtrlOut();
        }

        if (u32IntSts & USBD_INTSTS_EP2)
        {
            /* Clear event flag */
            USBD_CLR_INT_FLAG(USBD_INTSTS_EP2);
        }

        if (u32IntSts & USBD_INTSTS_EP3)
        {
            /* Clear event flag */
            USBD_CLR_INT_FLAG(USBD_INTSTS_EP3);
            // Bulk Out -> receive printer data
            PTR_Data_Receive();
        }

        if (u32IntSts & USBD_INTSTS_EP4)
        {
            /* Clear event flag */
            USBD_CLR_INT_FLAG(USBD_INTSTS_EP4);
        }

        if (u32IntSts & USBD_INTSTS_EP5)
        {
            /* Clear event flag */
            USBD_CLR_INT_FLAG(USBD_INTSTS_EP5);
            // Interrupt IN
            EP5_Handler();
        }

        if (u32IntSts & USBD_INTSTS_EP6)
        {
            /* Clear event flag */
            USBD_CLR_INT_FLAG(USBD_INTSTS_EP6);
            // Interrupt OUT
            EP6_Handler();
        }

        if (u32IntSts & USBD_INTSTS_EP7)
        {
            /* Clear event flag */
            USBD_CLR_INT_FLAG(USBD_INTSTS_EP7);
        }
    }
}
예제 #3
0
/**
 * USB virtual COM interrupt handler.
 * This is an internal function.
 */
static void USB_VirtualCOM_IRQHandler() {
	uint32_t intSts, busState;

	intSts = USBD_GET_INT_FLAG();
	busState = USBD_GET_BUS_STATE();

	if(intSts & USBD_INTSTS_FLDET) {
		if(USBD_IS_ATTACHED()) {
			// USB plugged in
			USBD_ENABLE_USB();
		}
		else {
			// USB unplugged
			USBD_DISABLE_USB();
		}
	}
	else if(intSts & USBD_INTSTS_BUS) {
		if(busState & USBD_STATE_USBRST) {
			// Bus reset
			USBD_ENABLE_USB();
			USBD_SwReset();
		}
		else if(busState & USBD_STATE_SUSPEND) {
			// Suspend: USB enabled, PHY disabled
			USBD_DISABLE_PHY();
		}
		else if(busState & USBD_STATE_RESUME) {
			// Resume: USB enabled, PHY enabled
			USBD_ENABLE_USB();
		}
	}
	else if(intSts & USBD_INTSTS_USB) {
		if(intSts & USBD_INTSTS_SETUP) {
			// Clear IN/OUT data ready flag for control endpoints
			USBD_STOP_TRANSACTION(USB_VCOM_CTRL_IN_EP);
			USBD_STOP_TRANSACTION(USB_VCOM_CTRL_OUT_EP);

			// Handle setup packet
			USBD_ProcessSetupPacket();
		}
		else if(intSts & USB_VCOM_CTRL_IN_INTSTS) {
			// Handle control IN
			USBD_CtrlIn();
		}
		else if(intSts & USB_VCOM_CTRL_OUT_INTSTS) {
			// Handle control OUT
			USBD_CtrlOut();
		}
		else if(intSts & USB_VCOM_BULK_IN_INTSTS) {
			// Handle bulk IN
			USB_VirtualCOM_HandleBulkIn();
		}
		else if(intSts & USB_VCOM_BULK_OUT_INTSTS) {
			// Handle bulk OUT
			USB_VirtualCOM_HandleBulkOut();
		}
	}

	// Clear flag
	USBD_CLR_INT_FLAG(intSts);
}