//--------------------------------------------------------------
USBH_Status USBH_Get_CfgDesc(USB_OTG_CORE_HANDLE *pdev,
USBH_HOST *phost,
uint16_t length)
{
USBH_Status status;
uint16_t index = 0;
if((status = USBH_GetDescriptor(pdev,
phost,
USB_REQ_RECIPIENT_DEVICE | USB_REQ_TYPE_STANDARD,
USB_DESC_CONFIGURATION,
pdev->host.Rx_Buffer,
length)) == USBH_OK)
{
/*save Cfg descriptor for class parsing usage */
for( ; index < length ; index ++)
{
USBH_CfgDesc[index] = pdev->host.Rx_Buffer[index];
}
/* Commands successfully sent and Response Received */
USBH_ParseCfgDesc (&phost->device_prop.Cfg_Desc,
phost->device_prop.Itf_Desc,
phost->device_prop.Ep_Desc,
pdev->host.Rx_Buffer,
length);
}
return status;
}
/**
* @brief USBH_Get_CfgDesc
* Issues Configuration Descriptor to the device. Once the response
* received, it parses the configuartion descriptor and updates the
* status.
* @param phost: Host Handle
* @param length: Length of the descriptor
* @retval USBH Status
*/
USBH_StatusTypeDef USBH_Get_CfgDesc(USBH_HandleTypeDef *phost,
uint16_t length)
{
USBH_StatusTypeDef status;
uint8_t *pData;
#if (USBH_KEEP_CFG_DESCRIPTOR == 1)
pData = phost->device.CfgDesc_Raw;
#else
pData = phost->device.Data;
#endif
if((status = USBH_GetDescriptor(phost,
USB_REQ_RECIPIENT_DEVICE | USB_REQ_TYPE_STANDARD,
USB_DESC_CONFIGURATION,
pData,
length)) == USBH_OK)
{
/* Commands successfully sent and Response Received */
USBH_ParseCfgDesc (&phost->device.CfgDesc,
pData,
length);
}
return status;
}
/**
* @brief USBH_Get_CfgDesc
* Issues Configuration Descriptor to the device. Once the response
* received, it parses the configuration descriptor and updates the
* status.
* @param pdev: Selected device
* @param cfg_desc: Configuration Descriptor address
* @param itf_desc: Interface Descriptor address
* @param ep_desc: Endpoint Descriptor address
* @param length: Length of the descriptor
* @retval Status
*/
USBH_Status USBH_Get_CfgDesc(USB_OTG_CORE_HANDLE *pdev,
USBH_HOST *phost,
uint16_t length)
{
USBH_Status status, result;
if((status = USBH_GetDescriptor(pdev,
phost,
USB_REQ_RECIPIENT_DEVICE | USB_REQ_TYPE_STANDARD,
USB_DESC_CONFIGURATION,
Cfg_Rx_Buffer,
length)) == USBH_OK)
{
/* Commands successfully sent and Response Received */
result = USBH_ParseCfgDesc (&phost->device_prop.Cfg_Desc,
phost->device_prop.Itf_Desc,
phost->device_prop.Ep_Desc,
Cfg_Rx_Buffer,
length);
if (result != USBH_OK) status= result;
}
return status;
}
uint8_t USBPTD_SetupStage(USB_OTG_CORE_HANDLE* pcore, USB_SETUP_REQ* req)
{
// store for later use from another function
memcpy(USBPT_LastSetupPacket, pcore->dev.setup_packet, 24);
// print for monitoring
USBPT_printf("\b\r\n USBPT:SETUP:");
for (uint8_t i = 0; i < 8; i++) {
USBPT_printf(" 0x%02X", USBPT_LastSetupPacket[i]);
}
USBPT_printf("\r\n");
// prepare to be sent to the device
memcpy(USBPT_Dev->Control.setup.d8, USBPT_LastSetupPacket, 8);
// set address must be handled explicitly
if ((req->bmRequest & 0x7F) == (USB_REQ_RECIPIENT_DEVICE | USB_REQ_TYPE_STANDARD) && req->bRequest == USB_REQ_SET_ADDRESS)
{
// let the internal code handle it for the device interface
USBD_StdDevReq(pcore, req);
// pass it to the downstream device
USBH_CtlReq_Blocking(&USB_OTG_Core_host, USBPT_Dev, 0, 0, 100);
USBD_CtlSendStatus(pcore);
// modifiy our host channel to match
USBPT_Dev->device_prop.address = (uint8_t)(req->wValue) & 0x7F;
USBH_Modify_Channel (&USB_OTG_Core_host,
USBPT_Dev->Control.hc_num_in,
USBPT_Dev->device_prop.address,
0,
0,
0);
USBH_Modify_Channel (&USB_OTG_Core_host,
USBPT_Dev->Control.hc_num_out,
USBPT_Dev->device_prop.address,
0,
0,
0);
// modify all other channels to match
for (uint8_t i = 0; i < USBPTH_MAX_LISTENERS; i++)
{
USBPTH_HC_EP_t* pl = &USBPTH_Listeners[i];
uint8_t hc = pl->hc;
if (hc != 0 && hc != HC_ERROR) // if listener is actually allocated
{
USBH_EpDesc_TypeDef* epDesc = pl->epDesc;
uint8_t epType = 0;
if ((epDesc->bmAttributes & USB_EP_TYPE_INTR) == USB_EP_TYPE_INTR) {
epType = EP_TYPE_INTR;
}
else if ((epDesc->bmAttributes & USB_EP_TYPE_INTR) == USB_EP_TYPE_BULK) {
epType = EP_TYPE_BULK;
}
else if ((epDesc->bmAttributes & USB_EP_TYPE_INTR) == USB_EP_TYPE_ISOC) {
epType = EP_TYPE_ISOC;
}
else if ((epDesc->bmAttributes & USB_EP_TYPE_INTR) == USB_EP_TYPE_CTRL) {
epType = EP_TYPE_CTRL;
}
USBH_Modify_Channel( &USB_OTG_Core_host,
USBPTH_Listeners[i].hc,
USBPT_Dev->device_prop.address,
USBPT_Dev->device_prop.speed,
epType,
USBPTH_Listeners[i].epDesc->wMaxPacketSize);
}
}
// note: out direction channels are dynamically allocated only when needed
// so we don't need to modify those channel addresses
return USBD_OK;
}
// no data means we can just directly relay the data
if (req->wLength == 0) {
USBH_CtlReq_Blocking(&USB_OTG_Core_host, USBPT_Dev, 0, 0, 100);
USBD_CtlSendStatus(pcore);
return USBD_OK;
}
// there is extra data later
USBPT_CtrlDataLen = req->wLength;
if (USBPT_CtrlData != 0) free(USBPT_CtrlData);
USBPT_CtrlData = malloc(USBPT_CtrlDataLen);
USBH_Status status;
// wait until previous req is finished
delay_1ms_cnt = 100;
while (delay_1ms_cnt > 0 &&
USBPT_Dev->Control.state != CTRL_COMPLETE &&
USBPT_Dev->Control.state != CTRL_IDLE &&
USBPT_Dev->Control.state != CTRL_ERROR &&
USBPT_Dev->Control.state != CTRL_STALLED);
{
status = USBH_HandleControl(&USB_OTG_Core_host, USBPT_Dev);
}
// finalize previous ctrl req
if (USBPT_Dev->RequestState == CMD_WAIT) {
USBH_CtlReq(&USB_OTG_Core_host, USBPT_Dev, 0 , 0 );
}
// prepare new setup
USBH_SubmitSetupRequest(USBPT_Dev, USBPT_CtrlData, USBPT_CtrlDataLen);
USBPT_Dev->RequestState = CMD_WAIT;
USBH_CtlSendSetup (&USB_OTG_Core_host, USBPT_Dev->Control.setup.d8, USBPT_Dev->Control.hc_num_out);
USBPT_Dev->Control.state = CTRL_SETUP_WAIT;
USBPT_Dev->Control.timer = HCD_GetCurrentFrame(pcore);
USBPT_Dev->Control.timeout = 50;
if ((req->bmRequest & 0x80) == 0)
{ // H2D
// we need to obtain the data from EP0_RxReady first
USBD_CtlPrepareRx (pcore, USBPT_CtrlData, USBPT_CtrlDataLen);
return USBD_OK;
}
else
{ // D2H
// wait for request to finish
delay_1ms_cnt = 100;
do
{
status = USBH_CtlReq(&USB_OTG_Core_host, USBPT_Dev, USBPT_CtrlData , USBPT_CtrlDataLen );
if (status == USBH_OK || status == USBH_FAIL || status == USBH_STALL || status == USBH_NOT_SUPPORTED) {
break;
}
else
{
status = USBH_HandleControl(&USB_OTG_Core_host, USBPT_Dev);
if (status == USBH_FAIL || status == USBH_STALL || status == USBH_NOT_SUPPORTED) {
break;
}
}
}
while (delay_1ms_cnt > 0);
if (delay_1ms_cnt == 0)
{
// timeout
dbg_printf(DBGMODE_ERR, "USBPT Setup Timed Out \r\n");
USBD_CtlSendStatus(pcore); // we reply with nothing to simulate a timeout
return USBH_OK;
}
else if (status == USBH_OK)
{
// all good, send back the data
USBD_CtlSendData (pcore, USBPT_CtrlData, USBPT_CtrlDataLen);
// handle config descriptors specially, we need to know what channels to open based on endpoints
if ((req->bmRequest & 0x7F) == (USB_REQ_RECIPIENT_DEVICE | USB_REQ_TYPE_STANDARD) &&
req->bRequest == USB_REQ_GET_DESCRIPTOR &&
req->wValue == USB_DESC_CONFIGURATION &&
req->wLength > USB_CONFIGURATION_DESC_SIZE)
{
// this is a full length configuration descriptor
// we need this info to open as many D2H endpoints to channels
USBH_ParseCfgDesc(&USBPT_Dev->device_prop.Cfg_Desc,
USBPT_Dev->device_prop.Itf_Desc,
USBPT_Dev->device_prop.Ep_Desc,
USBPT_CtrlData,
USBPT_CtrlDataLen);
USBPTH_OutEPCnt = 0;
USBPT_GeneralInDataLen = 0;
for (uint8_t i = 0; i < USBPT_Dev->device_prop.Cfg_Desc.bNumInterfaces && i < USBH_MAX_NUM_INTERFACES; i++)
{
for (uint8_t j = 0; j < USBPT_Dev->device_prop.Itf_Desc[i].bNumEndpoints && j < USBH_MAX_NUM_ENDPOINTS; j++)
{
USBH_EpDesc_TypeDef* epDesc = &USBPT_Dev->device_prop.Ep_Desc[i][j];
for (uint8_t k = 0; k < USBPTH_MAX_LISTENERS; k++)
{
if ((epDesc->bEndpointAddress & USB_EP_DIR_MSK) == USB_D2H && USBPTH_Listeners[k].used == 0)
{
USBPTH_Listeners[k].epDesc = epDesc;
uint8_t epType = 0;
if ((epDesc->bmAttributes & USB_EP_TYPE_INTR) == USB_EP_TYPE_INTR) {
epType = EP_TYPE_INTR;
}
else if ((epDesc->bmAttributes & USB_EP_TYPE_INTR) == USB_EP_TYPE_BULK) {
epType = EP_TYPE_BULK;
}
else if ((epDesc->bmAttributes & USB_EP_TYPE_INTR) == USB_EP_TYPE_ISOC) {
epType = EP_TYPE_ISOC;
}
else if ((epDesc->bmAttributes & USB_EP_TYPE_INTR) == USB_EP_TYPE_CTRL) {
epType = EP_TYPE_CTRL;
}
USBH_Open_Channel( &USB_OTG_Core_host,
&(USBPTH_Listeners[k].hc),
epDesc->bEndpointAddress,
USBPT_Dev->device_prop.address,
USBPT_Dev->device_prop.speed,
epType,
USBPTH_Listeners[k].epDesc->wMaxPacketSize);
if (USBPTH_Listeners[k].hc >= 0)
{
USBPTH_Listeners[k].used = 1;
DCD_EP_Open(&USB_OTG_Core_dev, epDesc->bEndpointAddress, epDesc->wMaxPacketSize, epType);
if (epDesc->wMaxPacketSize > USBPT_GeneralInDataMax) {
USBPT_GeneralInDataMax = epDesc->wMaxPacketSize;
}
}
}
}
if ((epDesc->bEndpointAddress & 0x80) == USB_H2D)
{
USBPTH_OutEPCnt++;
}
}
}
if (USBPT_GeneralInData != 0) free(USBPT_GeneralInData); // release memory if previously allocated
USBPT_GeneralInData = malloc(USBPT_GeneralInDataMax); // only allocate the memory we need
if (USBPTH_OutEP != 0) free(USBPTH_OutEP); // release memory if previously allocated
USBPTH_OutEP = malloc(sizeof(USBH_EpDesc_TypeDef*) * USBPTH_OutEPCnt); // only allocate the memory we need
uint8_t ec = 0;
for (uint8_t i = 0; i < USBPT_Dev->device_prop.Cfg_Desc.bNumInterfaces && i < USBH_MAX_NUM_INTERFACES; i++)
{
for (uint8_t j = 0; j < USBPT_Dev->device_prop.Itf_Desc[i].bNumEndpoints && j < USBH_MAX_NUM_ENDPOINTS; j++)
{
USBH_EpDesc_TypeDef* epDesc = &USBPT_Dev->device_prop.Ep_Desc[i][j];
if ((epDesc->bEndpointAddress & 0x80) == USB_H2D) {
// only save the H2D direction endpoints
USBPTH_OutEP[ec] = epDesc;
ec++;
}
}
}
}
return USBH_OK;
}
else
{
if (status == USBH_STALL || status == USBH_NOT_SUPPORTED) {
dbg_printf(DBGMODE_ERR, "USBPT Setup Stalled \r\n");
USBD_CtlError(pcore , req);
return USBH_OK;
}
}
return USBD_OK;
}
dbg_printf(DBGMODE_ERR, "USBPT Setup Unhandled Error \r\n");
USBD_CtlError(pcore , req);
return USBD_OK;
}
