예제 #1
0
bool handleNumInput(bContext *C, NumInput *n, const wmEvent *event)
{
	const char *utf8_buf = NULL;
	char ascii[2] = {'\0', '\0'};
	bool updated = false;
	short idx = n->idx, idx_max = n->idx_max;
	short dir = STRCUR_DIR_NEXT, mode = STRCUR_JUMP_NONE;
	int cur;
	double val;

	switch (event->type) {
		case EVT_MODAL_MAP:
			if (ELEM(event->val, NUM_MODAL_INCREMENT_UP, NUM_MODAL_INCREMENT_DOWN)) {
				n->val[idx] += (event->val == NUM_MODAL_INCREMENT_UP) ? n->val_inc[idx] : -n->val_inc[idx];
				value_to_editstr(n, idx);
				n->val_flag[idx] |= NUM_EDITED;
				updated = true;
			}
			else {
				/* might be a char too... */
				utf8_buf = event->utf8_buf;
				ascii[0] = event->ascii;
			}
			break;
		case BACKSPACEKEY:
			/* Part specific to backspace... */
			if (!(n->val_flag[idx] & NUM_EDITED)) {
				copy_v3_v3(n->val, n->val_org);
				n->val_flag[0] &= ~NUM_EDITED;
				n->val_flag[1] &= ~NUM_EDITED;
				n->val_flag[2] &= ~NUM_EDITED;
				updated = true;
				break;
			}
			else if (event->shift || !n->str[0]) {
				n->val[idx] = n->val_org[idx];
				n->val_flag[idx] &= ~NUM_EDITED;
				n->str[0] = '\0';
				n->str_cur = 0;
				updated = true;
				break;
			}
			/* Else, common behavior with DELKEY, only difference is remove char(s) before/after the cursor. */
			dir = STRCUR_DIR_PREV;
			/* fall-through */
		case DELKEY:
			if ((n->val_flag[idx] & NUM_EDITED) && n->str[0]) {
				int t_cur = cur = n->str_cur;
				if (event->ctrl) {
					mode = STRCUR_JUMP_DELIM;
				}
				BLI_str_cursor_step_utf8(n->str, strlen(n->str), &t_cur, dir, mode, true);
				if (t_cur != cur) {
					if (t_cur < cur) {
						SWAP(int, t_cur, cur);
						n->str_cur = cur;
					}
					memmove(&n->str[cur], &n->str[t_cur], strlen(&n->str[t_cur]) + 1);  /* +1 for trailing '\0'. */
					updated = true;
				}
			}
			else {
				return false;
			}
			break;
		case LEFTARROWKEY:
			dir = STRCUR_DIR_PREV;
			/* fall-through */
		case RIGHTARROWKEY:
			cur = n->str_cur;
			if (event->ctrl) {
				mode = STRCUR_JUMP_DELIM;
			}
			BLI_str_cursor_step_utf8(n->str, strlen(n->str), &cur, dir, mode, true);
			if (cur != n->str_cur) {
				n->str_cur = cur;
				return true;
			}
			return false;
		case HOMEKEY:
			if (n->str[0]) {
				n->str_cur = 0;
				return true;
			}
			return false;
		case ENDKEY:
			if (n->str[0]) {
				n->str_cur = strlen(n->str);
				return true;
			}
			return false;
		case TABKEY:
			n->val_org[idx] = n->val[idx];
			n->val_flag[idx] &= ~(NUM_NEGATE | NUM_INVERSE);

			idx += event->ctrl ? -1 : 1;
			idx %= idx_max + 1;
			n->idx = idx;
			n->val[idx] = n->val_org[idx];
			if (n->val_flag[idx] & NUM_EDITED) {
				value_to_editstr(n, idx);
			}
			else {
				n->str[0] = '\0';
				n->str_cur = 0;
			}
			return true;
		case PADPERIOD:
			/* Force numdot, some OSs/countries generate a comma char in this case, sic...  (T37992) */
			ascii[0] = '.';
			utf8_buf = ascii;
			break;
		case EQUALKEY:
		case PADASTERKEY:
			if (!(n->flag & NUM_EDIT_FULL)) {
				n->flag |= NUM_EDIT_FULL;
				n->val_flag[idx] |= NUM_EDITED;
				return true;
			}
			else if (event->ctrl) {
				n->flag &= ~NUM_EDIT_FULL;
				return true;
			}
			/* fall-through */
		case PADMINUS:
		case MINUSKEY:
			if (event->ctrl || !(n->flag & NUM_EDIT_FULL)) {
				n->val_flag[idx] ^= NUM_NEGATE;
				updated = true;
				break;
			}
			/* fall-through */
		case PADSLASHKEY:
		case SLASHKEY:
			if (event->ctrl || !(n->flag & NUM_EDIT_FULL)) {
				n->val_flag[idx] ^= NUM_INVERSE;
				updated = true;
				break;
			}
			/* fall-through */
		case CKEY:
			if (event->ctrl) {
				/* Copy current str to the copypaste buffer. */
				WM_clipboard_text_set(n->str, 0);
				updated = true;
				break;
			}
			/* fall-through */
		case VKEY:
			if (event->ctrl) {
				/* extract the first line from the clipboard */
				int pbuf_len;
				char *pbuf = WM_clipboard_text_get_firstline(false, &pbuf_len);

				if (pbuf) {
					bool success;

					success = editstr_insert_at_cursor(n, pbuf, pbuf_len);

					MEM_freeN(pbuf);
					if (!success) {
						return false;
					}

					n->val_flag[idx] |= NUM_EDITED;
				}
				updated = true;
				break;
			}
			/* fall-through */
		default:
			utf8_buf = event->utf8_buf;
			ascii[0] = event->ascii;
			break;
	}

	if (utf8_buf && !utf8_buf[0] && ascii[0]) {
		/* Fallback to ascii. */
		utf8_buf = ascii;
	}

	if (utf8_buf && utf8_buf[0]) {
		if (!(n->flag & NUM_EDIT_FULL)) {
			/* In simple edit mode, we only keep a few chars as valid! */
			/* no need to decode unicode, ascii is first char only */
			if (!editstr_is_simple_numinput(utf8_buf[0])) {
				return false;
			}
		}

		if (!editstr_insert_at_cursor(n, utf8_buf, BLI_str_utf8_size(utf8_buf))) {
			return false;
		}

		n->val_flag[idx] |= NUM_EDITED;
	}
	else if (!updated) {
		return false;
	}

	/* At this point, our value has changed, try to interpret it with python (if str is not empty!). */
	if (n->str[0]) {
#ifdef WITH_PYTHON
		char str_unit_convert[NUM_STR_REP_LEN * 6];  /* Should be more than enough! */
		const char *default_unit = NULL;

		/* Make radian default unit when needed. */
		if (n->unit_use_radians && n->unit_type[idx] == B_UNIT_ROTATION)
			default_unit = "r";

		BLI_strncpy(str_unit_convert, n->str, sizeof(str_unit_convert));

		bUnit_ReplaceString(str_unit_convert, sizeof(str_unit_convert), default_unit, 1.0,
		                    n->unit_sys, n->unit_type[idx]);

		/* Note: with angles, we always get values as radians here... */
		if (BPY_button_exec(C, str_unit_convert, &val, false) != -1) {
			n->val[idx] = (float)val;
			n->val_flag[idx] &= ~NUM_INVALID;
		}
		else {
			n->val_flag[idx] |= NUM_INVALID;
		}
#else  /* Very unlikely, but does not harm... */
		n->val[idx] = (float)atof(n->str);
#endif  /* WITH_PYTHON */

		if (n->val_flag[idx] & NUM_NEGATE) {
			n->val[idx] = -n->val[idx];
		}
		if (n->val_flag[idx] & NUM_INVERSE) {
			n->val[idx] = 1.0f / n->val[idx];
		}
	}

	/* REDRAW SINCE NUMBERS HAVE CHANGED */
	return true;
}
예제 #2
0
bool handleNumInput(bContext *C, NumInput *n, const wmEvent *event)
{
	const char *utf8_buf = NULL;
	char ascii[2] = {'\0', '\0'};
	bool updated = false;
	short idx = n->idx, idx_max = n->idx_max;
	short dir = STRCUR_DIR_NEXT, mode = STRCUR_JUMP_NONE;
	int cur;

	switch (event->type) {
		case EVT_MODAL_MAP:
			if (ELEM(event->val, NUM_MODAL_INCREMENT_UP, NUM_MODAL_INCREMENT_DOWN)) {
				n->val[idx] += (event->val == NUM_MODAL_INCREMENT_UP) ? n->val_inc[idx] : -n->val_inc[idx];
				value_to_editstr(n, idx);
				n->val_flag[idx] |= NUM_EDITED;
				updated = true;
			}
			else {
				/* might be a char too... */
				utf8_buf = event->utf8_buf;
				ascii[0] = event->ascii;
			}
			break;
		case BACKSPACEKEY:
			/* Part specific to backspace... */
			if (!(n->val_flag[idx] & NUM_EDITED)) {
				copy_v3_v3(n->val, n->val_org);
				n->val_flag[0] &= ~NUM_EDITED;
				n->val_flag[1] &= ~NUM_EDITED;
				n->val_flag[2] &= ~NUM_EDITED;
				n->flag |= NUM_FAKE_EDITED;
				updated = true;
				break;
			}
			else if (event->shift || !n->str[0]) {
				n->val[idx] = n->val_org[idx];
				n->val_flag[idx] &= ~NUM_EDITED;
				n->str[0] = '\0';
				n->str_cur = 0;
				updated = true;
				break;
			}
			/* Else, common behavior with DELKEY, only difference is remove char(s) before/after the cursor. */
			dir = STRCUR_DIR_PREV;
			ATTR_FALLTHROUGH;
		case DELKEY:
			if ((n->val_flag[idx] & NUM_EDITED) && n->str[0]) {
				int t_cur = cur = n->str_cur;
				if (event->ctrl) {
					mode = STRCUR_JUMP_DELIM;
				}
				BLI_str_cursor_step_utf8(n->str, strlen(n->str), &t_cur, dir, mode, true);
				if (t_cur != cur) {
					if (t_cur < cur) {
						SWAP(int, t_cur, cur);
						n->str_cur = cur;
					}
					memmove(&n->str[cur], &n->str[t_cur], strlen(&n->str[t_cur]) + 1);  /* +1 for trailing '\0'. */
					updated = true;
				}
				if (!n->str[0]) {
					n->val[idx] = n->val_org[idx];
				}
			}
			else {
				return false;
			}
			break;
		case LEFTARROWKEY:
			dir = STRCUR_DIR_PREV;
			ATTR_FALLTHROUGH;
		case RIGHTARROWKEY:
			cur = n->str_cur;
			if (event->ctrl) {
				mode = STRCUR_JUMP_DELIM;
			}
			BLI_str_cursor_step_utf8(n->str, strlen(n->str), &cur, dir, mode, true);
			if (cur != n->str_cur) {
				n->str_cur = cur;
				return true;
			}
			return false;
		case HOMEKEY:
			if (n->str[0]) {
				n->str_cur = 0;
				return true;
			}
			return false;
		case ENDKEY:
			if (n->str[0]) {
				n->str_cur = strlen(n->str);
				return true;
			}
			return false;
		case TABKEY:
			n->val_flag[idx] &= ~(NUM_NEGATE | NUM_INVERSE);

			idx = (idx + idx_max + (event->ctrl ? 0 : 2)) % (idx_max + 1);
			n->idx = idx;
			if (n->val_flag[idx] & NUM_EDITED) {
				value_to_editstr(n, idx);
			}
			else {
				n->str[0] = '\0';
				n->str_cur = 0;
			}
			return true;
		case PADPERIOD:
		case PERIODKEY:
			/* Force numdot, some OSs/countries generate a comma char in this case, sic...  (T37992) */
			ascii[0] = '.';
			utf8_buf = ascii;
			break;
#if 0
		/* Those keys are not directly accessible in all layouts, preventing to generate matching events.
		 * So we use a hack (ascii value) instead, see below.
		 */
		case EQUALKEY:
		case PADASTERKEY:
			if (!(n->flag & NUM_EDIT_FULL)) {
				n->flag |= NUM_EDIT_FULL;
				n->val_flag[idx] |= NUM_EDITED;
				return true;
			}
			else if (event->ctrl) {
				n->flag &= ~NUM_EDIT_FULL;
				return true;
			}
			break;
#endif
		case PADMINUS:
		case MINUSKEY:
			if (event->ctrl || !(n->flag & NUM_EDIT_FULL)) {
				n->val_flag[idx] ^= NUM_NEGATE;
				updated = true;
			}
			break;
		case PADSLASHKEY:
		case SLASHKEY:
			if (event->ctrl || !(n->flag & NUM_EDIT_FULL)) {
				n->val_flag[idx] ^= NUM_INVERSE;
				updated = true;
			}
			break;
		case CKEY:
			if (event->ctrl) {
				/* Copy current str to the copypaste buffer. */
				WM_clipboard_text_set(n->str, 0);
				updated = true;
			}
			break;
		case VKEY:
			if (event->ctrl) {
				/* extract the first line from the clipboard */
				int pbuf_len;
				char *pbuf = WM_clipboard_text_get_firstline(false, &pbuf_len);

				if (pbuf) {
					const bool success = editstr_insert_at_cursor(n, pbuf, pbuf_len);

					MEM_freeN(pbuf);
					if (!success) {
						return false;
					}

					n->val_flag[idx] |= NUM_EDITED;
				}
				updated = true;
			}
			break;
		default:
			break;
	}

	if (!updated && !utf8_buf && (event->utf8_buf[0] || event->ascii)) {
		utf8_buf = event->utf8_buf;
		ascii[0] = event->ascii;
	}

	/* XXX Hack around keyboards without direct access to '=' nor '*'... */
	if (ELEM(ascii[0], '=', '*')) {
		if (!(n->flag & NUM_EDIT_FULL)) {
			n->flag |= NUM_EDIT_FULL;
			n->val_flag[idx] |= NUM_EDITED;
			return true;
		}
		else if (event->ctrl) {
			n->flag &= ~NUM_EDIT_FULL;
			return true;
		}
	}

	/* Up to this point, if we have a ctrl modifier, skip.
	 * This allows to still access most of modals' shortcuts even in numinput mode.
	 */
	if (!updated && event->ctrl) {
		return false;
	}

	if ((!utf8_buf || !utf8_buf[0]) && ascii[0]) {
		/* Fallback to ascii. */
		utf8_buf = ascii;
	}

	if (utf8_buf && utf8_buf[0]) {
		if (!(n->flag & NUM_EDIT_FULL)) {
			/* In simple edit mode, we only keep a few chars as valid! */
			/* no need to decode unicode, ascii is first char only */
			if (!editstr_is_simple_numinput(utf8_buf[0])) {
				return false;
			}
		}

		if (!editstr_insert_at_cursor(n, utf8_buf, BLI_str_utf8_size(utf8_buf))) {
			return false;
		}

		n->val_flag[idx] |= NUM_EDITED;
	}
	else if (!updated) {
		return false;
	}

	/* At this point, our value has changed, try to interpret it with python (if str is not empty!). */
	if (n->str[0]) {
		const float val_prev = n->val[idx];
#ifdef WITH_PYTHON
		Scene *sce = CTX_data_scene(C);
		double val;
		char str_unit_convert[NUM_STR_REP_LEN * 6];  /* Should be more than enough! */
		const char *default_unit = NULL;

		/* Use scale_length if needed! */
		const float fac = (float)BKE_scene_unit_scale(&sce->unit, n->unit_type[idx], 1.0);

		/* Make radian default unit when needed. */
		if (n->unit_use_radians && n->unit_type[idx] == B_UNIT_ROTATION)
			default_unit = "r";

		BLI_strncpy(str_unit_convert, n->str, sizeof(str_unit_convert));

		bUnit_ReplaceString(str_unit_convert, sizeof(str_unit_convert), default_unit, fac,
		                    n->unit_sys, n->unit_type[idx]);

		/* Note: with angles, we always get values as radians here... */
		if (BPY_execute_string_as_number(C, str_unit_convert, false, &val)) {
			n->val[idx] = (float)val;
			n->val_flag[idx] &= ~NUM_INVALID;
		}
		else {
			n->val_flag[idx] |= NUM_INVALID;
		}
#else  /* Very unlikely, but does not harm... */
		n->val[idx] = (float)atof(n->str);
		(void)C;
#endif  /* WITH_PYTHON */

		if (n->val_flag[idx] & NUM_NEGATE) {
			n->val[idx] = -n->val[idx];
		}
		if (n->val_flag[idx] & NUM_INVERSE) {
			n->val[idx] = 1.0f / n->val[idx];
		}

		if (UNLIKELY(!isfinite(n->val[idx]))) {
			n->val[idx] = val_prev;
			n->val_flag[idx] |= NUM_INVALID;
		}
	}

	/* REDRAW SINCE NUMBERS HAVE CHANGED */
	return true;
}