static void _mali_osk_wq_delayed_work_func( struct work_struct *work )
{
mali_osk_wq_delayed_work_object_t *work_object;
work_object = _MALI_OSK_CONTAINER_OF(work, mali_osk_wq_delayed_work_object_t, work.work);
work_object->handler(work_object->data);
}
static void _mali_osk_wq_work_func( struct work_struct *work )
{
mali_osk_wq_work_object_t *work_object;
work_object = _MALI_OSK_CONTAINER_OF(work, mali_osk_wq_work_object_t, work_handle);
/* We want higher priority than the Dynamic Priority, setting it to the lowest of the RT priorities */
if (MALI_TRUE == work_object->high_pri) {
set_user_nice(current, -19);
}
work_object->handler(work_object->data);
}
static void _mali_osk_wq_work_func( struct work_struct *work )
{
mali_osk_wq_work_object_t *work_object;
work_object = _MALI_OSK_CONTAINER_OF(work, mali_osk_wq_work_object_t, work_handle);
#if MALI_LICENSE_IS_GPL
#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,36)
/* We want higher priority than the Dynamic Priority, setting it to the lowest of the RT priorities */
if (MALI_TRUE == work_object->high_pri) {
set_user_nice(current, -19);
}
#endif
#endif /* MALI_LICENSE_IS_GPL */
work_object->handler(work_object->data);
}
static void irq_handler_bottom_half ( void * input )
#endif
{
mali_osk_irq_object_t *irq_object;
#if defined(INIT_DELAYED_WORK)
irq_object = _MALI_OSK_CONTAINER_OF(work, mali_osk_irq_object_t, work_queue_irq_handle);
#else
if ( NULL == input )
{
MALI_PRINT_ERROR(("IRQ: Null pointer! Illegal!"));
return; /* Error */
}
irq_object = (mali_osk_irq_object_t *) input;
#endif
irq_object->bhandler(irq_object->data);
}
static void _mali_osk_wq_work_func(struct work_struct *work)
{
mali_osk_wq_work_object_t *work_object;
work_object = _MALI_OSK_CONTAINER_OF(work, mali_osk_wq_work_object_t, work_handle);
#if MALI_LICENSE_IS_GPL
#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,36)
/* We want highest Dynamic priority of the thread so that the Jobs depending
** on this thread could be scheduled in time. Without this, this thread might
** sometimes need to wait for some threads in user mode to finish its round-robin
** time, causing *bubble* in the Mali pipeline. Thanks to the new implementation
** of high-priority workqueue in new kernel, this only happens in older kernel.
*/
if (MALI_TRUE == work_object->high_pri) {
set_user_nice(current, -19);
}
#endif
#endif /* MALI_LICENSE_IS_GPL */
work_object->handler(work_object->data);
}
/* Start this job on this core. Return MALI_TRUE if the job was started. */
static _mali_osk_errcode_t subsystem_mali200_start_job(mali_core_job * job, mali_core_renderunit * core)
{
mali200_job *job200;
/* The local extended version of the general structs */
job200 = _MALI_OSK_CONTAINER_OF(job, mali200_job, embedded_core_job);
if ( (0 == job200->user_input.frame_registers[0]) ||
(0 == job200->user_input.frame_registers[1]) )
{
MALI_DEBUG_PRINT(4, ("Mali PP: Job: 0x%08x WILL NOT START SINCE JOB HAS ILLEGAL ADDRESSES\n",
(u32)job200->user_input.user_job_ptr));
MALI_ERROR(_MALI_OSK_ERR_FAULT);
}
MALI_DEBUG_PRINT(4, ("Mali PP: Job: 0x%08x START_RENDER Tile_list: 0x%08x\n",
(u32)job200->user_input.user_job_ptr,
job200->user_input.frame_registers[0]));
MALI_DEBUG_PRINT(6, ("Mali PP: RSW base addr: 0x%08x Vertex base addr: 0x%08x\n",
job200->user_input.frame_registers[1], job200->user_input.frame_registers[2]));
/* Frame registers. Copy from mem to physical registers */
mali_core_renderunit_register_write_array(
core,
MALI200_REG_ADDR_FRAME,
&(job200->user_input.frame_registers[0]),
MALI200_NUM_REGS_FRAME);
/* Write Back unit 0. Copy from mem to physical registers only if the WB unit will be used. */
if (job200->user_input.wb0_registers[0])
{
mali_core_renderunit_register_write_array(
core,
MALI200_REG_ADDR_WB0,
&(job200->user_input.wb0_registers[0]),
MALI200_NUM_REGS_WBx);
}
/* Write Back unit 1. Copy from mem to physical registers only if the WB unit will be used. */
if (job200->user_input.wb1_registers[0])
{
mali_core_renderunit_register_write_array(
core,
MALI200_REG_ADDR_WB1,
&(job200->user_input.wb1_registers[0]),
MALI200_NUM_REGS_WBx);
}
/* Write Back unit 2. Copy from mem to physical registers only if the WB unit will be used. */
if (job200->user_input.wb2_registers[0])
{
mali_core_renderunit_register_write_array(
core,
MALI200_REG_ADDR_WB2,
&(job200->user_input.wb2_registers[0]),
MALI200_NUM_REGS_WBx);
}
/* This selects which performance counters we are reading */
if ( 0 != job200->user_input.perf_counter_flag )
{
if ( job200->user_input.perf_counter_flag & _MALI_PERFORMANCE_COUNTER_FLAG_SRC0_ENABLE)
{
mali_core_renderunit_register_write_relaxed(
core,
MALI200_REG_ADDR_MGMT_PERF_CNT_0_ENABLE,
MALI200_REG_VAL_PERF_CNT_ENABLE);
mali_core_renderunit_register_write_relaxed(
core,
MALI200_REG_ADDR_MGMT_PERF_CNT_0_SRC,
job200->user_input.perf_counter_src0);
}
if ( job200->user_input.perf_counter_flag & _MALI_PERFORMANCE_COUNTER_FLAG_SRC1_ENABLE)
{
mali_core_renderunit_register_write_relaxed(
core,
MALI200_REG_ADDR_MGMT_PERF_CNT_1_ENABLE,
MALI200_REG_VAL_PERF_CNT_ENABLE);
mali_core_renderunit_register_write_relaxed(
core,
MALI200_REG_ADDR_MGMT_PERF_CNT_1_SRC,
job200->user_input.perf_counter_src1);
}
#if defined(USING_MALI400_L2_CACHE)
if ( job200->user_input.perf_counter_flag & (_MALI_PERFORMANCE_COUNTER_FLAG_L2_SRC0_ENABLE|_MALI_PERFORMANCE_COUNTER_FLAG_L2_SRC1_ENABLE) )
{
int force_reset = ( job200->user_input.perf_counter_flag & _MALI_PERFORMANCE_COUNTER_FLAG_L2_RESET ) ? 1 : 0;
u32 src0 = 0;
u32 src1 = 0;
if ( job200->user_input.perf_counter_flag & _MALI_PERFORMANCE_COUNTER_FLAG_L2_SRC0_ENABLE )
{
src0 = job200->user_input.perf_counter_l2_src0;
}
if ( job200->user_input.perf_counter_flag & _MALI_PERFORMANCE_COUNTER_FLAG_L2_SRC1_ENABLE )
{
src1 = job200->user_input.perf_counter_l2_src1;
}
mali_kernel_l2_cache_set_perf_counters(src0, src1, force_reset); /* will activate and possibly reset counters */
/* Now, retrieve the current values, so we can substract them when the job has completed */
mali_kernel_l2_cache_get_perf_counters(&job200->perf_counter_l2_src0,
&job200->perf_counter_l2_val0,
&job200->perf_counter_l2_src1,
&job200->perf_counter_l2_val1);
}
#endif
}
subsystem_flush_mapped_mem_cache();
#if MALI_STATE_TRACKING
_mali_osk_atomic_inc(&job->session->jobs_started);
#endif
/* This is the command that starts the Core */
mali_core_renderunit_register_write(
core,
MALI200_REG_ADDR_MGMT_CTRL_MGMT,
MALI200_REG_VAL_CTRL_MGMT_START_RENDERING);
_mali_osk_write_mem_barrier();
#if MALI_TIMELINE_PROFILING_ENABLED
_mali_profiling_add_event(MALI_PROFILING_EVENT_TYPE_SINGLE | MALI_PROFILING_MAKE_EVENT_CHANNEL_PP(core->core_number) | MALI_PROFILING_EVENT_REASON_SINGLE_HW_FLUSH, job200->user_input.frame_builder_id, job200->user_input.flush_id, 0, 0, 0);
_mali_profiling_add_event(MALI_PROFILING_EVENT_TYPE_START|MALI_PROFILING_MAKE_EVENT_CHANNEL_PP(core->core_number), job200->pid, job200->tid,
#if defined(USING_MALI400_L2_CACHE)
(job200->user_input.perf_counter_l2_src0 << 16) | (job200->user_input.perf_counter_l2_src1 << 24),
job200->perf_counter_l2_val0, job200->perf_counter_l2_val1
#else
0, 0, 0
#endif
);
#endif
MALI_SUCCESS;
}