예제 #1
0
/**
 *      dev_mc_unsync   - Remove synchronized addresses from the destination
 *			  device
 *	@to: destination device
 *	@from: source device
 *
 *	Remove all addresses that were added to the destination device by
 *	dev_mc_sync(). This function is intended to be called from the
 *	dev->stop function of layered software devices.
 */
void dev_mc_unsync(struct net_device *to, struct net_device *from)
{
	struct dev_addr_list *da, *next, *da_to;

	netif_tx_lock_bh(from);
	netif_tx_lock_bh(to);

	da = from->mc_list;
	while (da != NULL) {
		bool synced = false;
		next = da->next;
		da_to = to->mc_list;
		/* 2.6.22 does not have da->da_synced so lets take the long route */
		while (da_to != NULL) {
			if (memcmp(da_to->da_addr, da->da_addr, da_to->da_addrlen) == 0 &&
				da->da_addrlen == da_to->da_addrlen)
				synced = true;
				break;
		}
		if (!synced) {
			da = next;
			continue;
		}
		__dev_addr_delete(&to->mc_list, &to->mc_count,
			da->da_addr, da->da_addrlen, 0);
		__dev_addr_delete(&from->mc_list, &from->mc_count,
			da->da_addr, da->da_addrlen, 0);
		da = next;
	}
	__dev_set_rx_mode(to);

	netif_tx_unlock_bh(to);
	netif_tx_unlock_bh(from);
}
int __dev_addr_sync(struct dev_addr_list **to, int *to_count,
		    struct dev_addr_list **from, int *from_count)
{
	struct dev_addr_list *da, *next;
	int err = 0;

	da = *from;
	while (da != NULL) {
		next = da->next;
		if (!da->da_synced) {
			err = __dev_addr_add(to, to_count,
					     da->da_addr, da->da_addrlen, 0);
			if (err < 0)
				break;
			da->da_synced = 1;
			da->da_users++;
		} else if (da->da_users == 1) {
			__dev_addr_delete(to, to_count,
					  da->da_addr, da->da_addrlen, 0);
			__dev_addr_delete(from, from_count,
					  da->da_addr, da->da_addrlen, 0);
		}
		da = next;
	}
	return err;
}
예제 #3
0
파일: dev_mcast.c 프로젝트: cilynx/dd-wrt
/**
 *	dev_mc_sync	- Synchronize device's multicast list to another device
 *	@to: destination device
 *	@from: source device
 *
 * 	Add newly added addresses to the destination device and release
 * 	addresses that have no users left. The source device must be
 * 	locked by netif_tx_lock_bh.
 *
 *	This function is intended to be called from the dev->set_multicast_list
 *	function of layered software devices.
 */
int dev_mc_sync(struct net_device *to, struct net_device *from)
{
	struct dev_addr_list *da, *next;
	int err = 0;

	netif_tx_lock_bh(to);
	da = from->mc_list;
	while (da != NULL) {
		next = da->next;
		if (!da->da_synced) {
			err = __dev_addr_add(&to->mc_list, &to->mc_count,
					     da->da_addr, da->da_addrlen, 0);
			if (err < 0)
				break;
			da->da_synced = 1;
			da->da_users++;
		} else if (da->da_users == 1) {
			__dev_addr_delete(&to->mc_list, &to->mc_count,
					  da->da_addr, da->da_addrlen, 0);
			__dev_addr_delete(&from->mc_list, &from->mc_count,
					  da->da_addr, da->da_addrlen, 0);
		}
		da = next;
	}
	if (!err)
		__dev_set_rx_mode(to);
	netif_tx_unlock_bh(to);

	return err;
}
void __dev_addr_unsync(struct dev_addr_list **to, int *to_count,
		       struct dev_addr_list **from, int *from_count)
{
	struct dev_addr_list *da, *next;

	da = *from;
	while (da != NULL) {
		next = da->next;
		if (da->da_synced) {
			__dev_addr_delete(to, to_count,
					  da->da_addr, da->da_addrlen, 0);
			da->da_synced = 0;
			__dev_addr_delete(from, from_count,
					  da->da_addr, da->da_addrlen, 0);
		}
		da = next;
	}
}
예제 #5
0
/**
 *	dev_mc_sync	- Synchronize device's multicast list to another device
 *	@to: destination device
 *	@from: source device
 *
 * 	Add newly added addresses to the destination device and release
 * 	addresses that have no users left. The source device must be
 * 	locked by netif_tx_lock_bh.
 *
 *	This function is intended to be called from the dev->set_multicast_list
 *	function of layered software devices.
 */
int dev_mc_sync(struct net_device *to, struct net_device *from)
{
	struct dev_addr_list *da, *next, *da_to;
	int err = 0;

	netif_tx_lock_bh(to);
	da = from->mc_list;
	while (da != NULL) {
		int synced = 0;
		next = da->next;
		da_to = to->mc_list;
		/* 2.6.22 does not have da->da_synced so lets take the long route */
		while (da_to != NULL) {
			if (memcmp(da_to->da_addr, da->da_addr, da_to->da_addrlen) == 0 &&
				da->da_addrlen == da_to->da_addrlen)
				synced = 1;
				break;
		}
		if (!synced) {
			err = __dev_addr_add(&to->mc_list, &to->mc_count,
					     da->da_addr, da->da_addrlen, 0);
			if (err < 0)
				break;
			da->da_users++;
		} else if (da->da_users == 1) {
			__dev_addr_delete(&to->mc_list, &to->mc_count,
					  da->da_addr, da->da_addrlen, 0);
			__dev_addr_delete(&from->mc_list, &from->mc_count,
					  da->da_addr, da->da_addrlen, 0);
		}
		da = next;
	}
	if (!err)
		__dev_set_rx_mode(to);
	netif_tx_unlock_bh(to);

	return err;
}
예제 #6
0
파일: dev_mcast.c 프로젝트: cilynx/dd-wrt
/**
 * 	dev_mc_unsync	- Remove synchronized addresses from the destination
 * 			  device
 *	@to: destination device
 *	@from: source device
 *
 * 	Remove all addresses that were added to the destination device by
 * 	dev_mc_sync(). This function is intended to be called from the
 * 	dev->stop function of layered software devices.
 */
void dev_mc_unsync(struct net_device *to, struct net_device *from)
{
	struct dev_addr_list *da, *next;

	netif_tx_lock_bh(from);
	netif_tx_lock_bh(to);

	da = from->mc_list;
	while (da != NULL) {
		next = da->next;
		if (!da->da_synced)
			continue;
		__dev_addr_delete(&to->mc_list, &to->mc_count,
				  da->da_addr, da->da_addrlen, 0);
		da->da_synced = 0;
		__dev_addr_delete(&from->mc_list, &from->mc_count,
				  da->da_addr, da->da_addrlen, 0);
		da = next;
	}
	__dev_set_rx_mode(to);

	netif_tx_unlock_bh(to);
	netif_tx_unlock_bh(from);
}
예제 #7
0
int dev_mc_delete(struct net_device *dev, void *addr, int alen, int glbl)
{
	int err;

	netif_addr_lock_bh(dev);
	err = __dev_addr_delete(&dev->mc_list, &dev->mc_count,
				addr, alen, glbl);
	if (!err) {
		/*
		 *	We have altered the list, so the card
		 *	loaded filter is now wrong. Fix it
		 */

		__dev_set_rx_mode(dev);
	}
	netif_addr_unlock_bh(dev);
	return err;
}