int unmount_sdcard()
{
_mqx_uint param;
_mqx_int error_code;
boolean readonly = FALSE;
char filesystem_name[] = "a:";
char partman_name[] = "pm:";
printf("unmounte sd card +\n");
_lwsem_wait(&SD_MFS_IO_SEM);
if( ! sd_mounted) {
_lwsem_post(&SD_MFS_IO_SEM);
return 0;
}
/* Close the filesystem */
if (MQX_OK != fclose (filesystem_handle)) {
printf("Error closing filesystem.\n");
_task_block();
}
filesystem_handle = NULL;
/* Uninstall MFS */
error_code = _io_dev_uninstall(filesystem_name);
if (error_code != MFS_NO_ERROR) {
printf("Error uninstalling filesystem.\n");
_task_block();
}
/* Close partition manager */
if (MQX_OK != fclose (partman_handle)) {
printf("Unable to close partition manager.\n");
_task_block();
}
partman_handle = NULL;
/* Uninstall partition manager */
error_code = _io_dev_uninstall(partman_name);
if (error_code != MFS_NO_ERROR) {
printf("Error uninstalling partition manager.\n");
_task_block();
}
/* Close the SD card device */
if (MQX_OK != fclose (sdcard_handle)) {
printf("Unable to close SD card device.\n");
_task_block();
}
sdcard_handle = NULL;
sd_mounted = 0;
printf("unmounted sd card -\n");
_lwsem_post(&SD_MFS_IO_SEM);
return 0;
}
/*TASK*-----------------------------------------------------------------
*
* Function Name : sdcard_task
* Returned Value : void
* Comments :
*
*END------------------------------------------------------------------*/
void sdcard_task(uint_32 temp)
{
boolean inserted = TRUE, readonly = FALSE, last = FALSE;
_mqx_int error_code;
_mqx_uint param;
MQX_FILE_PTR com_handle, sdcard_handle, filesystem_handle, partman_handle;
char filesystem_name[] = "a:";// 文件系统 名字
char partman_name[] = "pm:";// 分区管理 名字
#if defined BSP_SDCARD_GPIO_DETECT
#if ! BSP_SDCARD_GPIO_DETECT_INT
LWGPIO_STRUCT sd_detect;
#else
LWGPIO_STRUCT sd_detect;
/************************dx 20121210**********************************************
*/
GPIO_PIN_STRUCT sd_detect_int[] = {
BSP_SDCARD_GPIO_DETECT | GPIO_PIN_IRQ_FALLING | GPIO_PIN_IRQ_RISING,
GPIO_LIST_END
};
MQX_FILE_PTR port_file_sd_detect_int;
/***********************************************************************************/
#endif
#endif
#if defined BSP_SDCARD_GPIO_PROTECT
LWGPIO_STRUCT sd_protect;
#endif
#ifdef BSP_SDCARD_GPIO_CS
LWGPIO_STRUCT sd_cs;
SPI_CS_CALLBACK_STRUCT callback;
#endif
/* Open low level communication device */
com_handle = fopen (SDCARD_COM_CHANNEL, NULL);// 打开"esdhc:"模块底层驱动
if (NULL == com_handle)
{
printf("Error installing communication handle.\n");
_task_block();
}
#ifdef BSP_SDCARD_GPIO_CS
/* Open GPIO file for SPI CS signal emulation */
error_code = lwgpio_init(&sd_cs, BSP_SDCARD_GPIO_CS, LWGPIO_DIR_OUTPUT, LWGPIO_VALUE_NOCHANGE);// 安装简单引脚用于spi片选
if (!error_code)
{
printf("Initializing GPIO with associated pins failed.\n");
_task_block();
}
lwgpio_set_functionality(&sd_cs,BSP_SDCARD_CS_MUX_GPIO);
lwgpio_set_attribute(&sd_cs, LWGPIO_ATTR_PULL_UP, LWGPIO_AVAL_ENABLE);
/* Set CS callback */
callback.MASK = BSP_SDCARD_SPI_CS;
callback.CALLBACK = set_CS;
callback.USERDATA = &sd_cs;
if (SPI_OK != ioctl (com_handle, IO_IOCTL_SPI_SET_CS_CALLBACK, &callback))
{
printf ("Setting CS callback failed.\n");
_task_block();
}
#endif
#if defined BSP_SDCARD_GPIO_DETECT
#if ! BSP_SDCARD_GPIO_DETECT_INT
/* Init GPIO pins for other SD card signals */
error_code = lwgpio_init(&sd_detect, BSP_SDCARD_GPIO_DETECT, LWGPIO_DIR_INPUT, LWGPIO_VALUE_NOCHANGE);// 安装简单引脚用于插入检测
if (!error_code)
{
printf("Initializing GPIO with sdcard detect pin failed.\n");
_task_block();
}
/*Set detect and protect pins as GPIO Function */
lwgpio_set_functionality(&sd_detect,BSP_SDCARD_DETECT_MUX_GPIO);
lwgpio_set_attribute(&sd_detect, LWGPIO_ATTR_PULL_UP, LWGPIO_AVAL_ENABLE);
#else
/******************dx 20121210***********************************************/
if (NULL == (port_file_sd_detect_int = fopen("gpio:read", (char_ptr) &sd_detect_int )))
{
printf("Opening port_file_sd_detect_int GPIO with associated button1_int failed.\n");
_task_block();
}
ioctl(port_file_sd_detect_int, GPIO_IOCTL_SET_IRQ_FUNCTION, (pointer)sd_detect_int__callback);
_lwevent_create(&SD_Event,0); // 创建轻量级事件用于检测SD插入
/****************************************************************************/
#endif
#endif
#if defined BSP_SDCARD_GPIO_PROTECT
/* Init GPIO pins for other SD card signals */
error_code = lwgpio_init(&sd_protect, BSP_SDCARD_GPIO_PROTECT, LWGPIO_DIR_INPUT, LWGPIO_VALUE_NOCHANGE);// 安装简单引脚用于只读检测
if (!error_code)
{
printf("Initializing GPIO with sdcard protect pin failed.\n");
_task_block();
}
/*Set detect and protect pins as GPIO Function */
lwgpio_set_functionality(&sd_protect,BSP_SDCARD_PROTECT_MUX_GPIO);
lwgpio_set_attribute(&sd_protect, LWGPIO_ATTR_PULL_UP, LWGPIO_AVAL_ENABLE);
#endif
/* Install SD card device */
error_code = _io_sdcard_install("sdcard:", (pointer)&_bsp_sdcard0_init, com_handle);// 安装SD卡驱动，基于"esdhc:"模块
if ( error_code != MQX_OK )
{
printf("Error installing SD card device (0x%x)\n", error_code);
_task_block();
}
/*使用内部IOCTL命令测试SD卡是否已经插入 dx20121223*/
uint_32 sd_param;
sd_param = 0;
if (ESDHC_OK != ioctl (com_handle, IO_IOCTL_ESDHC_GET_CARD, &sd_param))
{
printf("Error get SD card device type.\n");
_task_block();
}
if (ESDHC_CARD_NONE != sd_param)
{
inserted = TRUE; // 已插入SD卡
printf("inserted = 1 -> %d\n",(int)sd_param);
}else
{
inserted = FALSE; // 无SD卡
printf("inserted = 0 -> %d\n",(int)sd_param);
}
for (;;)/////////////////////////////////////////////////////////////////////////////循环
{
#if defined BSP_SDCARD_GPIO_PROTECT
/* Get value of protect pin */
readonly = lwgpio_get_value(&sd_protect);// 检测磁盘是否只读////////////////////////////////////////
#endif
#ifdef BSP_MPC8308RDB
/* Set function as SD_CD which indicate that card is present in Present State Register */
lwgpio_set_functionality(&sd_detect,BSP_SDCARD_DETECT_MUX_SD_CD);
lwgpio_set_attribute(&sd_detect, LWGPIO_ATTR_PULL_UP, LWGPIO_AVAL_ENABLE);
#endif
if (last != inserted)
{
if (inserted)// 插入磁盘
{
// _time_delay (200);// 将活动的任务挂起指定的毫秒数
/* Open the device which MFS will be installed on */
sdcard_handle = fopen("sdcard:", 0);// 打开SD卡层驱动
if ( sdcard_handle == NULL )
{
printf("Unable to open SD card device.\n");
_task_block();
}
/* Set read only flag as needed */
param = 0;
if (readonly)
{
param = IO_O_RDONLY;
}
if (IO_OK != ioctl(sdcard_handle, IO_IOCTL_SET_FLAGS, (char_ptr) ¶m))
{
printf("Setting device read only failed.\n");
_task_block();
}
/* Install partition manager over SD card driver */
error_code = _io_part_mgr_install(sdcard_handle, partman_name, 0);// 分区管理
if (error_code != MFS_NO_ERROR)
{
printf("Error installing partition manager: %s\n", MFS_Error_text((uint_32)error_code));
_task_block();
}
/* Open partition manager */
partman_handle = fopen(partman_name, NULL);// 打开分区
if (partman_handle == NULL)
{
error_code = ferror(partman_handle);
printf("Error opening partition manager: %s\n", MFS_Error_text((uint_32)error_code));
_task_block();
}
/* Validate partition 1 */
param = 1;
error_code = _io_ioctl(partman_handle, IO_IOCTL_VAL_PART, ¶m);// 控制分区
if (error_code == MQX_OK)
{
/* Install MFS over partition 1 */
error_code = _io_mfs_install(partman_handle, filesystem_name, param);/////安装文件系统，基于分区
if (error_code != MFS_NO_ERROR)
{
printf("Error initializing MFS over partition: %s\n", MFS_Error_text((uint_32)error_code));
_task_block();
}
} else {
/* Install MFS over SD card driver */
error_code = _io_mfs_install(sdcard_handle, filesystem_name, (_file_size)0);////////安装文件系统，无分区
if (error_code != MFS_NO_ERROR)
{
printf("Error initializing MFS: %s\n", MFS_Error_text((uint_32)error_code));
_task_block();
}
}
/* Open file system */
filesystem_handle = fopen(filesystem_name, NULL);// 打开文件系统
error_code = ferror (filesystem_handle);
if ((error_code != MFS_NO_ERROR) && (error_code != MFS_NOT_A_DOS_DISK))
{
printf("Error opening filesystem: %s\n", MFS_Error_text((uint_32)error_code));
_task_block();
}
if ( error_code == MFS_NOT_A_DOS_DISK )
{
printf("NOT A DOS DISK! You must format to continue.\n");
}
printf ("SD card installed to %s\n", filesystem_name);
if (readonly)
{
printf ("SD card is locked (read only).\n");
}
}
else // 拔出磁盘
{
/* Close the filesystem */
if (MQX_OK != fclose (filesystem_handle))
{
printf("Error closing filesystem.\n");
_task_block();
}
filesystem_handle = NULL;
/* Uninstall MFS */
error_code = _io_dev_uninstall(filesystem_name);
if (error_code != MFS_NO_ERROR)
{
printf("Error uninstalling filesystem.\n");
_task_block();
}
/* Close partition manager */
if (MQX_OK != fclose (partman_handle))
{
printf("Unable to close partition manager.\n");
_task_block();
}
partman_handle = NULL;
/* Uninstall partition manager */
error_code = _io_dev_uninstall(partman_name);
if (error_code != MFS_NO_ERROR)
{
printf("Error uninstalling partition manager.\n");
_task_block();
}
/* Close the SD card device */
if (MQX_OK != fclose (sdcard_handle))
{
printf("Unable to close SD card device.\n");
_task_block();
}
sdcard_handle = NULL;
printf ("SD card uninstalled.\n");
printf ("sd unOK dx.\n");/////////////////////////dx
}
}
last = inserted;
// _time_delay (200);// 将活动的任务挂起指定的毫秒数
// #if defined BSP_SDCARD_GPIO_DETECT
// #if BSP_SDCARD_GPIO_DETECT_INT
// /****************dx 20121211************************************************************/
// _lwevent_wait_ticks(&SD_Event,SD_EVENT_DETECT,FALSE,0);///////////等待事件USB_EVENT
// _lwevent_clear(&SD_Event,SD_EVENT_DETECT);
// /****************************************************************************************/
// #endif
// #endif
/*使用SD外部端口测试SD卡是否已经插入*/
#if defined BSP_SDCARD_GPIO_DETECT
#ifdef BSP_MPC8308RDB
/* Set function as GPIO to detect sdcard */
lwgpio_set_functionality(&sd_detect,BSP_SDCARD_DETECT_MUX_GPIO);
lwgpio_set_attribute(&sd_detect, LWGPIO_ATTR_PULL_UP, LWGPIO_AVAL_ENABLE);
#endif
#if ! BSP_SDCARD_GPIO_DETECT_INT
inserted = !lwgpio_get_value(&sd_detect);// 检测磁盘是否插入/////////////////////////////////////////
#else
/****************dx 20121211************************************************************/
_lwevent_wait_ticks(&SD_Event,SD_EVENT_DETECT,FALSE,0);///////////等待事件USB_EVENT
_lwevent_clear(&SD_Event,SD_EVENT_DETECT);
ioctl(port_file_sd_detect_int, GPIO_IOCTL_READ, (char_ptr) &sd_detect_int);
inserted = !( sd_detect_int[0] & GPIO_PIN_STATUS);
/****************************************************************************************/
#endif
#endif
}/////////////////////////////////////////////////////////////////////////////循环
}
void usb_filesystem_uninstall( USB_FILESYSTEM_STRUCT_PTR usb_fs_ptr)
{
int_32 error_code;
uint_32 mfs_status;
if (usb_fs_ptr == NULL) {
return;
}
_int_disable();
printf("\nDevice removed, starting device cleanup");
printf("\n--->Closing MFS");
if (usb_fs_ptr->FS_FD_PTR) {
error_code = fclose(usb_fs_ptr->FS_FD_PTR);
if ( error_code != IO_OK ) {
printf("\nError closing MFS device: 0x%X.", error_code);
}
}
printf("\n--->Uninstalling %s",usb_fs_ptr->FS_NAME);
if (usb_fs_ptr->FS_NAME) {
mfs_status = _io_mfs_uninstall(usb_fs_ptr->FS_NAME);
if ((mfs_status != MFS_NO_ERROR) && (mfs_status !=IO_DEVICE_DOES_NOT_EXIST)) {
printf("\nError while uninstalling MFS on device");
}
}
if (usb_fs_ptr->PM_FD_PTR != NULL) {
/* Close partition device */
printf("\n--->Closing partition");
error_code = fclose(usb_fs_ptr->PM_FD_PTR);
if ( error_code != IO_OK ) {
printf("\nError closing Partition device %s: 0x%X.", usb_fs_ptr->PM_NAME, error_code);
}
}
if (usb_fs_ptr->PM_NAME) {
/* Uninstall the partition manager */
printf("\n--->Uninstalling PM");
error_code = _io_part_mgr_uninstall(usb_fs_ptr->PM_NAME);
if (( error_code != IO_OK ) && (mfs_status !=IO_DEVICE_DOES_NOT_EXIST)) {
printf("\nError uninstalling Partition device %s: 0x%X.", usb_fs_ptr->PM_NAME, error_code);
}
}
/* USB mass storage link device */
if (usb_fs_ptr->DEV_FD_PTR) {
printf("\n--->Closing disk");
error_code = fclose(usb_fs_ptr->DEV_FD_PTR);
if ( error_code != IO_OK ) {
printf("\nError closing disk (0x%X)", error_code);
}
}
_int_enable();
if (usb_fs_ptr->DEV_NAME) {
printf("\n--->Closing USB MFS");
_io_dev_uninstall(usb_fs_ptr->DEV_NAME);
}
_mem_free(usb_fs_ptr);
}
/*TASK*-----------------------------------------------------------------
*
* Function Name : sdcard_task
* Returned Value : void
* Comments :
*
*END------------------------------------------------------------------*/
void sdcard_task(uint_32 temp)
{
boolean inserted = TRUE, readonly = FALSE, last = FALSE;
_mqx_int error_code;
_mqx_uint param;
MQX_FILE_PTR com_handle, sdcard_handle, filesystem_handle, partition_handle;
char filesystem_name[] = "a:";
char partman_name[] = "pm:";
char partition_name[] = "pm:1";
#if defined BSP_SDCARD_GPIO_DETECT
LWGPIO_STRUCT sd_detect;
#endif
#if defined BSP_SDCARD_GPIO_PROTECT
LWGPIO_STRUCT sd_protect;
#endif
#ifdef BSP_SDCARD_GPIO_CS
LWGPIO_STRUCT sd_cs;
SPI_CS_CALLBACK_STRUCT callback;
#endif
/* Open low level communication device */
com_handle = fopen(SDCARD_COM_CHANNEL, (void *)(SPI_FLAG_FULL_DUPLEX));
if (NULL == com_handle)
{
printf("Error opening communication handle %s, check your user_config.h.\n", SDCARD_COM_CHANNEL);
_task_block();
}
#ifdef BSP_SDCARD_GPIO_CS
/* Open GPIO file for SPI CS signal emulation */
error_code = lwgpio_init(&sd_cs, BSP_SDCARD_GPIO_CS, LWGPIO_DIR_OUTPUT, LWGPIO_VALUE_NOCHANGE);
if (!error_code)
{
printf("Initializing GPIO with associated pins failed.\n");
_task_block();
}
lwgpio_set_functionality(&sd_cs,BSP_SDCARD_CS_MUX_GPIO);
lwgpio_set_attribute(&sd_cs, LWGPIO_ATTR_PULL_UP, LWGPIO_AVAL_ENABLE);
/* Set CS callback */
callback.MASK = BSP_SDCARD_SPI_CS;
callback.CALLBACK = set_CS;
callback.USERDATA = &sd_cs;
if (SPI_OK != ioctl(com_handle, IO_IOCTL_SPI_SET_CS_CALLBACK, &callback))
{
printf ("Setting CS callback failed.\n");
_task_block();
}
#endif
#if defined BSP_SDCARD_GPIO_DETECT
/* Init GPIO pins for other SD card signals */
error_code = lwgpio_init(&sd_detect, BSP_SDCARD_GPIO_DETECT, LWGPIO_DIR_INPUT, LWGPIO_VALUE_NOCHANGE);
if (!error_code)
{
printf("Initializing GPIO with sdcard detect pin failed.\n");
_task_block();
}
/*Set detect and protect pins as GPIO Function */
lwgpio_set_functionality(&sd_detect,BSP_SDCARD_DETECT_MUX_GPIO);
lwgpio_set_attribute(&sd_detect, LWGPIO_ATTR_PULL_UP, LWGPIO_AVAL_ENABLE);
#endif
#if defined BSP_SDCARD_GPIO_PROTECT
/* Init GPIO pins for other SD card signals */
error_code = lwgpio_init(&sd_protect, BSP_SDCARD_GPIO_PROTECT, LWGPIO_DIR_INPUT, LWGPIO_VALUE_NOCHANGE);
if (!error_code)
{
printf("Initializing GPIO with sdcard protect pin failed.\n");
_task_block();
}
/*Set detect and protect pins as GPIO Function */
lwgpio_set_functionality(&sd_protect,BSP_SDCARD_PROTECT_MUX_GPIO);
lwgpio_set_attribute(&sd_protect, LWGPIO_ATTR_PULL_UP, LWGPIO_AVAL_ENABLE);
#endif
/* Install SD card device */
error_code = _io_sdcard_install("sdcard:", (pointer)&_bsp_sdcard0_init, com_handle);
if ( error_code != MQX_OK )
{
printf("Error installing SD card device (0x%x)\n", error_code);
_task_block();
}
for (;;)
{
#if defined BSP_SDCARD_GPIO_DETECT
#ifdef BSP_MPC8308RDB
/* Set function as GPIO to detect sdcard */
lwgpio_set_functionality(&sd_detect,BSP_SDCARD_DETECT_MUX_GPIO);
lwgpio_set_attribute(&sd_detect, LWGPIO_ATTR_PULL_UP, LWGPIO_AVAL_ENABLE);
#endif
inserted = !lwgpio_get_value(&sd_detect);
#endif
#if defined BSP_SDCARD_GPIO_PROTECT
/* Get value of protect pin */
readonly = lwgpio_get_value(&sd_protect);
#endif
#ifdef BSP_MPC8308RDB
/* Set function as SD_CD which indicate that card is present in Present State Register */
lwgpio_set_functionality(&sd_detect,BSP_SDCARD_DETECT_MUX_SD_CD);
lwgpio_set_attribute(&sd_detect, LWGPIO_ATTR_PULL_UP, LWGPIO_AVAL_ENABLE);
#endif
if (last != inserted)
{
last = inserted;
if (inserted)
{
_time_delay (200);
/* Open the device which MFS will be installed on */
sdcard_handle = fopen("sdcard:", 0);
if (sdcard_handle == NULL)
{
printf("Unable to open SD card device.\n");
continue;
}
/* Set read only flag as needed */
param = 0;
if (readonly)
{
param = IO_O_RDONLY;
}
if (IO_OK != ioctl(sdcard_handle, IO_IOCTL_SET_FLAGS, (char_ptr) ¶m))
{
printf("Setting device read only failed.\n");
continue;
}
/* Install partition manager over SD card driver */
error_code = _io_part_mgr_install(sdcard_handle, partman_name, 0);
if (error_code != MFS_NO_ERROR)
{
printf("Error installing partition manager: %s\n", MFS_Error_text((uint_32)error_code));
continue;
}
/* Open partition */
partition_handle = fopen(partition_name, NULL);
if (partition_handle != NULL)
{
printf("Installing MFS over partition...\n");
/* Validate partition */
error_code = _io_ioctl(partition_handle, IO_IOCTL_VAL_PART, NULL);
if (error_code != MFS_NO_ERROR)
{
printf("Error validating partition: %s\n", MFS_Error_text((uint_32)error_code));
printf("Not installing MFS.\n");
continue;
}
/* Install MFS over partition */
error_code = _io_mfs_install(partition_handle, filesystem_name, 0);
if (error_code != MFS_NO_ERROR)
{
printf("Error initializing MFS over partition: %s\n", MFS_Error_text((uint_32)error_code));
}
} else {
printf("Installing MFS over SD card driver...\n");
/* Install MFS over SD card driver */
error_code = _io_mfs_install(sdcard_handle, filesystem_name, (_file_size)0);
if (error_code != MFS_NO_ERROR)
{
printf("Error initializing MFS: %s\n", MFS_Error_text((uint_32)error_code));
}
}
/* Open file system */
if (error_code == MFS_NO_ERROR) {
filesystem_handle = fopen(filesystem_name, NULL);
error_code = ferror(filesystem_handle);
if (error_code == MFS_NOT_A_DOS_DISK)
{
printf("NOT A DOS DISK! You must format to continue.\n");
}
else if (error_code != MFS_NO_ERROR)
{
printf("Error opening filesystem: %s\n", MFS_Error_text((uint_32)error_code));
continue;
}
printf ("SD card installed to %s\n", filesystem_name);
if (readonly)
{
printf ("SD card is locked (read only).\n");
}
}
}
else
{
/* Close the filesystem */
if ((filesystem_handle != NULL) && (MQX_OK != fclose(filesystem_handle)))
{
printf("Error closing filesystem.\n");
}
filesystem_handle = NULL;
/* Uninstall MFS */
error_code = _io_dev_uninstall(filesystem_name);
if (error_code != MFS_NO_ERROR)
{
printf("Error uninstalling filesystem.\n");
}
/* Close partition */
if ((partition_handle != NULL) && (MQX_OK != fclose(partition_handle)))
{
printf("Error closing partition.\n");
}
partition_handle = NULL;
/* Uninstall partition manager */
error_code = _io_dev_uninstall(partman_name);
if (error_code != MFS_NO_ERROR)
{
printf("Error uninstalling partition manager.\n");
}
/* Close the SD card device */
if ((sdcard_handle != NULL) && (MQX_OK != fclose(sdcard_handle)))
{
printf("Unable to close SD card device.\n");
}
sdcard_handle = NULL;
printf ("SD card uninstalled.\n");
}
}
_time_delay (200);
}
}
static void usb_filesystem_cancel_install( USB_FILESYSTEM_STRUCT_PTR usb_fs_ptr,int cancel_flag)
{
int_32 error_code;
if (usb_fs_ptr == NULL) {
return;
}
_int_disable();
switch (cancel_flag) {
case USB_DEV_OPEN_FAIL:
goto Uninstall_USB_device;
case PARTITION_INIT_FAIL:
goto Close_USB_device;
case PARTITION_OPEN_FAIL:
goto Uninstall_partition_manager;
case PARTITION_VALIDATE_FAIL:
goto Close_partition; //Uninstall_partition_manager;
case MFS_INIT_FAIL:
goto Uninstall_MFS;
case MFS_OPEN_FAIL:
goto Close_the_filesystem;
default:
printf("error cancel flag\n");
}
Close_the_filesystem:
/* Close the filesystem */
if ((usb_fs_ptr->FS_FD_PTR != NULL) && (MQX_OK != fclose(usb_fs_ptr->FS_FD_PTR)))
{
printf("Error while closing filesystem.\n");
}
Uninstall_MFS:
/* Uninstall MFS */
error_code = _io_dev_uninstall(usb_fs_ptr->FS_NAME);
if (error_code != MFS_NO_ERROR)
{
printf("Error while uninstalling filesystem.\n");
}
Close_partition:
/* Close partition */
if ((usb_fs_ptr->PM_FD_PTR != NULL) && (MQX_OK != fclose(usb_fs_ptr->PM_FD_PTR)))
{
printf("Error while closing partition.\n");
}
Uninstall_partition_manager:
/* Uninstall partition manager */
error_code = _io_dev_uninstall(usb_fs_ptr->PM_NAME);
if (error_code != MFS_NO_ERROR)
{
printf("Error while uninstalling partition manager.\n");
}
Close_USB_device:
/* Close USB device */
if ((usb_fs_ptr->DEV_FD_PTR != NULL) && (MQX_OK != fclose(usb_fs_ptr->DEV_FD_PTR)))
{
printf("Unable to close USB device.\n");
}
Uninstall_USB_device:
/* Uninstall USB device */
error_code = _io_dev_uninstall(usb_fs_ptr->DEV_NAME);
if (error_code != MQX_OK)
{
printf("Error while uninstalling USB device.\n");
}
_mem_free(usb_fs_ptr);
_int_enable();
printf("USB device removed.\n");
}
void usb_filesystem_uninstall( USB_FILESYSTEM_STRUCT_PTR usb_fs_ptr)
{
int_32 error_code;
if (usb_fs_ptr == NULL) {
return;
}
_int_disable();
/* Close the filesystem */
#if 1
printf("1");
error_code = fclose(usb_fs_ptr->FS_FD_PTR);
if ((usb_fs_ptr->FS_FD_PTR != NULL) && (MQX_OK != error_code))
{
printf("Error while closing filesystem %d.\n",error_code);
}
#else
if (usb_fs_ptr->FS_FD_PTR != NULL)
{
printf("\r\n\r\nWaiting for tasks to close all files.\r\n");
error_code = fclose(usb_fs_ptr->FS_FD_PTR);
/* while */if (error_code == MFS_SHARING_VIOLATION)
{
/*
* Filesystem could not be closed. There are probably still some files opened preventing it.
* Wait for a while (give other tasks a chance to finish their job) and try again.
*/
printf("-");
//_int_enable();
_time_delay(200);
//_int_disable();
printf(".");
error_code = fclose(usb_fs_ptr->FS_FD_PTR);
}
if (error_code != MQX_OK)
{
printf("Error while closing filesystem.\r\n");
}
}
#endif
/* Uninstall MFS */
error_code = _io_dev_uninstall(usb_fs_ptr->FS_NAME);
if (error_code != MFS_NO_ERROR)
{
printf("Error while uninstalling filesystem.\n");
}
/* Close partition */
if ((usb_fs_ptr->PM_FD_PTR != NULL) && (MQX_OK != fclose(usb_fs_ptr->PM_FD_PTR)))
{
printf("Error while closing partition.\n");
}
/* Uninstall partition manager */
error_code = _io_dev_uninstall(usb_fs_ptr->PM_NAME);
if (error_code != MFS_NO_ERROR)
{
printf("Error while uninstalling partition manager.\n");
}
/* Close USB device */
if ((usb_fs_ptr->DEV_FD_PTR != NULL) && (MQX_OK != fclose(usb_fs_ptr->DEV_FD_PTR)))
{
printf("Unable to close USB device.\n");
}
_int_enable();
/* Uninstall USB device */
error_code = _io_dev_uninstall(usb_fs_ptr->DEV_NAME);
if (error_code != MQX_OK)
{
printf("Error while uninstalling USB device.\n");
}
_mem_free(usb_fs_ptr);
printf("USB device removed.\n");
}
