int do_accel_calibration(int mavlink_fd)
{
int fd;
int32_t device_id[max_sens];
mavlink_and_console_log_info(mavlink_fd, CAL_STARTED_MSG, sensor_name);
mavlink_and_console_log_info(mavlink_fd, "You need to put the system on all six sides");
sleep(3);
mavlink_and_console_log_info(mavlink_fd, "Follow the instructions on the screen");
sleep(5);
struct accel_scale accel_scale = {
0.0f,
1.0f,
0.0f,
1.0f,
0.0f,
1.0f,
};
int res = OK;
char str[30];
/* reset all sensors */
for (unsigned s = 0; s < max_sens; s++) {
sprintf(str, "%s%u", ACCEL_BASE_DEVICE_PATH, s);
/* reset all offsets to zero and all scales to one */
fd = open(str, 0);
if (fd < 0) {
continue;
}
device_id[s] = ioctl(fd, DEVIOCGDEVICEID, 0);
res = ioctl(fd, ACCELIOCSSCALE, (long unsigned int)&accel_scale);
close(fd);
if (res != OK) {
mavlink_and_console_log_critical(mavlink_fd, CAL_FAILED_RESET_CAL_MSG);
}
}
float accel_offs[max_sens][3];
float accel_T[max_sens][3][3];
unsigned active_sensors;
if (res == OK) {
/* measure and calculate offsets & scales */
res = do_accel_calibration_measurements(mavlink_fd, accel_offs, accel_T, &active_sensors);
}
if (res != OK || active_sensors == 0) {
mavlink_and_console_log_critical(mavlink_fd, CAL_FAILED_SENSOR_MSG);
return ERROR;
}
/* measurements completed successfully, rotate calibration values */
param_t board_rotation_h = param_find("SENS_BOARD_ROT");
int32_t board_rotation_int;
param_get(board_rotation_h, &(board_rotation_int));
enum Rotation board_rotation_id = (enum Rotation)board_rotation_int;
math::Matrix<3, 3> board_rotation;
get_rot_matrix(board_rotation_id, &board_rotation);
math::Matrix<3, 3> board_rotation_t = board_rotation.transposed();
for (unsigned i = 0; i < active_sensors; i++) {
/* handle individual sensors, one by one */
math::Vector<3> accel_offs_vec(accel_offs[i]);
math::Vector<3> accel_offs_rotated = board_rotation_t * accel_offs_vec;
math::Matrix<3, 3> accel_T_mat(accel_T[i]);
math::Matrix<3, 3> accel_T_rotated = board_rotation_t * accel_T_mat * board_rotation;
accel_scale.x_offset = accel_offs_rotated(0);
accel_scale.x_scale = accel_T_rotated(0, 0);
accel_scale.y_offset = accel_offs_rotated(1);
accel_scale.y_scale = accel_T_rotated(1, 1);
accel_scale.z_offset = accel_offs_rotated(2);
accel_scale.z_scale = accel_T_rotated(2, 2);
bool failed = false;
/* set parameters */
(void)sprintf(str, "CAL_ACC%u_XOFF", i);
failed |= (OK != param_set(param_find(str), &(accel_scale.x_offset)));
(void)sprintf(str, "CAL_ACC%u_YOFF", i);
failed |= (OK != param_set(param_find(str), &(accel_scale.y_offset)));
(void)sprintf(str, "CAL_ACC%u_ZOFF", i);
failed |= (OK != param_set(param_find(str), &(accel_scale.z_offset)));
(void)sprintf(str, "CAL_ACC%u_XSCALE", i);
failed |= (OK != param_set(param_find(str), &(accel_scale.x_scale)));
(void)sprintf(str, "CAL_ACC%u_YSCALE", i);
failed |= (OK != param_set(param_find(str), &(accel_scale.y_scale)));
(void)sprintf(str, "CAL_ACC%u_ZSCALE", i);
failed |= (OK != param_set(param_find(str), &(accel_scale.z_scale)));
(void)sprintf(str, "CAL_ACC%u_ID", i);
failed |= (OK != param_set(param_find(str), &(device_id[i])));
if (failed) {
mavlink_and_console_log_critical(mavlink_fd, CAL_FAILED_SET_PARAMS_MSG);
return ERROR;
}
sprintf(str, "%s%u", ACCEL_BASE_DEVICE_PATH, i);
fd = open(str, 0);
if (fd < 0) {
mavlink_and_console_log_critical(mavlink_fd, "sensor does not exist");
res = ERROR;
} else {
res = ioctl(fd, ACCELIOCSSCALE, (long unsigned int)&accel_scale);
close(fd);
}
if (res != OK) {
mavlink_and_console_log_critical(mavlink_fd, CAL_FAILED_APPLY_CAL_MSG);
}
}
if (res == OK) {
/* auto-save to EEPROM */
res = param_save_default();
if (res != OK) {
mavlink_and_console_log_critical(mavlink_fd, CAL_FAILED_SAVE_PARAMS_MSG);
}
mavlink_and_console_log_info(mavlink_fd, CAL_DONE_MSG, sensor_name);
} else {
mavlink_and_console_log_critical(mavlink_fd, CAL_FAILED_MSG, sensor_name);
}
return res;
}
int do_accel_calibration(orb_advert_t *mavlink_log_pub)
{
#if !defined(__PX4_QURT) && !defined(__PX4_POSIX_EAGLE) && !defined(__PX4_POSIX_RPI)
int fd;
#endif
calibration_log_info(mavlink_log_pub, CAL_QGC_STARTED_MSG, sensor_name);
struct accel_calibration_s accel_scale;
accel_scale.x_offset = 0.0f;
accel_scale.x_scale = 1.0f;
accel_scale.y_offset = 0.0f;
accel_scale.y_scale = 1.0f;
accel_scale.z_offset = 0.0f;
accel_scale.z_scale = 1.0f;
int res = OK;
char str[30];
/* reset all sensors */
for (unsigned s = 0; s < max_accel_sens; s++) {
#if !defined(__PX4_QURT) && !defined(__PX4_POSIX_EAGLE) && !defined(__PX4_POSIX_RPI)
sprintf(str, "%s%u", ACCEL_BASE_DEVICE_PATH, s);
/* reset all offsets to zero and all scales to one */
fd = px4_open(str, 0);
if (fd < 0) {
continue;
}
device_id[s] = px4_ioctl(fd, DEVIOCGDEVICEID, 0);
res = px4_ioctl(fd, ACCELIOCSSCALE, (long unsigned int)&accel_scale);
px4_close(fd);
if (res != OK) {
calibration_log_critical(mavlink_log_pub, CAL_ERROR_RESET_CAL_MSG, s);
}
#else
(void)sprintf(str, "CAL_ACC%u_XOFF", s);
res = param_set(param_find(str), &accel_scale.x_offset);
if (res != OK) {
PX4_ERR("unable to reset %s", str);
}
(void)sprintf(str, "CAL_ACC%u_YOFF", s);
res = param_set(param_find(str), &accel_scale.y_offset);
if (res != OK) {
PX4_ERR("unable to reset %s", str);
}
(void)sprintf(str, "CAL_ACC%u_ZOFF", s);
res = param_set(param_find(str), &accel_scale.z_offset);
if (res != OK) {
PX4_ERR("unable to reset %s", str);
}
(void)sprintf(str, "CAL_ACC%u_XSCALE", s);
res = param_set(param_find(str), &accel_scale.x_scale);
if (res != OK) {
PX4_ERR("unable to reset %s", str);
}
(void)sprintf(str, "CAL_ACC%u_YSCALE", s);
res = param_set(param_find(str), &accel_scale.y_scale);
if (res != OK) {
PX4_ERR("unable to reset %s", str);
}
(void)sprintf(str, "CAL_ACC%u_ZSCALE", s);
res = param_set(param_find(str), &accel_scale.z_scale);
if (res != OK) {
PX4_ERR("unable to reset %s", str);
}
#endif
}
float accel_offs[max_accel_sens][3];
float accel_T[max_accel_sens][3][3];
unsigned active_sensors;
/* measure and calculate offsets & scales */
if (res == OK) {
calibrate_return cal_return = do_accel_calibration_measurements(mavlink_log_pub, accel_offs, accel_T, &active_sensors);
if (cal_return == calibrate_return_cancelled) {
// Cancel message already displayed, nothing left to do
return ERROR;
} else if (cal_return == calibrate_return_ok) {
res = OK;
} else {
res = ERROR;
}
}
if (res != OK) {
if (active_sensors == 0) {
calibration_log_critical(mavlink_log_pub, CAL_ERROR_SENSOR_MSG);
}
return ERROR;
}
/* measurements completed successfully, rotate calibration values */
param_t board_rotation_h = param_find("SENS_BOARD_ROT");
int32_t board_rotation_int;
param_get(board_rotation_h, &(board_rotation_int));
enum Rotation board_rotation_id = (enum Rotation)board_rotation_int;
math::Matrix<3, 3> board_rotation;
get_rot_matrix(board_rotation_id, &board_rotation);
math::Matrix<3, 3> board_rotation_t = board_rotation.transposed();
for (unsigned i = 0; i < active_sensors; i++) {
/* handle individual sensors, one by one */
math::Vector<3> accel_offs_vec(accel_offs[i]);
math::Vector<3> accel_offs_rotated = board_rotation_t * accel_offs_vec;
math::Matrix<3, 3> accel_T_mat(accel_T[i]);
math::Matrix<3, 3> accel_T_rotated = board_rotation_t * accel_T_mat * board_rotation;
accel_scale.x_offset = accel_offs_rotated(0);
accel_scale.x_scale = accel_T_rotated(0, 0);
accel_scale.y_offset = accel_offs_rotated(1);
accel_scale.y_scale = accel_T_rotated(1, 1);
accel_scale.z_offset = accel_offs_rotated(2);
accel_scale.z_scale = accel_T_rotated(2, 2);
bool failed = false;
failed = failed || (OK != param_set_no_notification(param_find("CAL_ACC_PRIME"), &(device_id_primary)));
PX4_DEBUG("found offset %d: x: %.6f, y: %.6f, z: %.6f", i,
(double)accel_scale.x_offset,
(double)accel_scale.y_offset,
(double)accel_scale.z_offset);
PX4_DEBUG("found scale %d: x: %.6f, y: %.6f, z: %.6f", i,
(double)accel_scale.x_scale,
(double)accel_scale.y_scale,
(double)accel_scale.z_scale);
/* set parameters */
(void)sprintf(str, "CAL_ACC%u_XOFF", i);
failed |= (OK != param_set_no_notification(param_find(str), &(accel_scale.x_offset)));
(void)sprintf(str, "CAL_ACC%u_YOFF", i);
failed |= (OK != param_set_no_notification(param_find(str), &(accel_scale.y_offset)));
(void)sprintf(str, "CAL_ACC%u_ZOFF", i);
failed |= (OK != param_set_no_notification(param_find(str), &(accel_scale.z_offset)));
(void)sprintf(str, "CAL_ACC%u_XSCALE", i);
failed |= (OK != param_set_no_notification(param_find(str), &(accel_scale.x_scale)));
(void)sprintf(str, "CAL_ACC%u_YSCALE", i);
failed |= (OK != param_set_no_notification(param_find(str), &(accel_scale.y_scale)));
(void)sprintf(str, "CAL_ACC%u_ZSCALE", i);
failed |= (OK != param_set_no_notification(param_find(str), &(accel_scale.z_scale)));
(void)sprintf(str, "CAL_ACC%u_ID", i);
failed |= (OK != param_set_no_notification(param_find(str), &(device_id[i])));
if (failed) {
calibration_log_critical(mavlink_log_pub, CAL_ERROR_SET_PARAMS_MSG, i);
return ERROR;
}
#if !defined(__PX4_QURT) && !defined(__PX4_POSIX_EAGLE) && !defined(__PX4_POSIX_RPI)
sprintf(str, "%s%u", ACCEL_BASE_DEVICE_PATH, i);
fd = px4_open(str, 0);
if (fd < 0) {
calibration_log_critical(mavlink_log_pub, CAL_QGC_FAILED_MSG, "sensor does not exist");
res = ERROR;
} else {
res = px4_ioctl(fd, ACCELIOCSSCALE, (long unsigned int)&accel_scale);
px4_close(fd);
}
if (res != OK) {
calibration_log_critical(mavlink_log_pub, CAL_ERROR_APPLY_CAL_MSG, i);
}
#endif
}
if (res == OK) {
/* auto-save to EEPROM */
res = param_save_default();
if (res != OK) {
calibration_log_critical(mavlink_log_pub, CAL_ERROR_SAVE_PARAMS_MSG);
}
/* if there is a any preflight-check system response, let the barrage of messages through */
usleep(200000);
calibration_log_info(mavlink_log_pub, CAL_QGC_DONE_MSG, sensor_name);
} else {
calibration_log_critical(mavlink_log_pub, CAL_QGC_FAILED_MSG, sensor_name);
}
/* give this message enough time to propagate */
usleep(600000);
return res;
}
int do_accel_calibration(orb_advert_t *mavlink_log_pub)
{
#ifdef __PX4_NUTTX
int fd;
#endif
calibration_log_info(mavlink_log_pub, CAL_QGC_STARTED_MSG, sensor_name);
struct accel_calibration_s accel_scale;
accel_scale.x_offset = 0.0f;
accel_scale.x_scale = 1.0f;
accel_scale.y_offset = 0.0f;
accel_scale.y_scale = 1.0f;
accel_scale.z_offset = 0.0f;
accel_scale.z_scale = 1.0f;
int res = PX4_OK;
char str[30];
/* reset all sensors */
for (unsigned s = 0; s < max_accel_sens; s++) {
#ifdef __PX4_NUTTX
sprintf(str, "%s%u", ACCEL_BASE_DEVICE_PATH, s);
/* reset all offsets to zero and all scales to one */
fd = px4_open(str, 0);
if (fd < 0) {
continue;
}
device_id[s] = px4_ioctl(fd, DEVIOCGDEVICEID, 0);
res = px4_ioctl(fd, ACCELIOCSSCALE, (long unsigned int)&accel_scale);
px4_close(fd);
if (res != PX4_OK) {
calibration_log_critical(mavlink_log_pub, CAL_ERROR_RESET_CAL_MSG, s);
}
#else
(void)sprintf(str, "CAL_ACC%u_XOFF", s);
res = param_set_no_notification(param_find(str), &accel_scale.x_offset);
if (res != PX4_OK) {
PX4_ERR("unable to reset %s", str);
}
(void)sprintf(str, "CAL_ACC%u_YOFF", s);
res = param_set_no_notification(param_find(str), &accel_scale.y_offset);
if (res != PX4_OK) {
PX4_ERR("unable to reset %s", str);
}
(void)sprintf(str, "CAL_ACC%u_ZOFF", s);
res = param_set_no_notification(param_find(str), &accel_scale.z_offset);
if (res != PX4_OK) {
PX4_ERR("unable to reset %s", str);
}
(void)sprintf(str, "CAL_ACC%u_XSCALE", s);
res = param_set_no_notification(param_find(str), &accel_scale.x_scale);
if (res != PX4_OK) {
PX4_ERR("unable to reset %s", str);
}
(void)sprintf(str, "CAL_ACC%u_YSCALE", s);
res = param_set_no_notification(param_find(str), &accel_scale.y_scale);
if (res != PX4_OK) {
PX4_ERR("unable to reset %s", str);
}
(void)sprintf(str, "CAL_ACC%u_ZSCALE", s);
res = param_set_no_notification(param_find(str), &accel_scale.z_scale);
if (res != PX4_OK) {
PX4_ERR("unable to reset %s", str);
}
param_notify_changes();
#endif
}
float accel_offs[max_accel_sens][3];
float accel_T[max_accel_sens][3][3];
unsigned active_sensors = 0;
/* measure and calculate offsets & scales */
if (res == PX4_OK) {
calibrate_return cal_return = do_accel_calibration_measurements(mavlink_log_pub, accel_offs, accel_T, &active_sensors);
if (cal_return == calibrate_return_cancelled) {
// Cancel message already displayed, nothing left to do
return PX4_ERROR;
} else if (cal_return == calibrate_return_ok) {
res = PX4_OK;
} else {
res = PX4_ERROR;
}
}
if (res != PX4_OK) {
if (active_sensors == 0) {
calibration_log_critical(mavlink_log_pub, CAL_ERROR_SENSOR_MSG);
}
return PX4_ERROR;
}
/* measurements completed successfully, rotate calibration values */
param_t board_rotation_h = param_find("SENS_BOARD_ROT");
int32_t board_rotation_int;
param_get(board_rotation_h, &(board_rotation_int));
enum Rotation board_rotation_id = (enum Rotation)board_rotation_int;
math::Matrix<3, 3> board_rotation;
get_rot_matrix(board_rotation_id, &board_rotation);
math::Matrix<3, 3> board_rotation_t = board_rotation.transposed();
bool tc_locked[3] = {false}; // true when the thermal parameter instance has already been adjusted by the calibrator
for (unsigned uorb_index = 0; uorb_index < active_sensors; uorb_index++) {
/* handle individual sensors, one by one */
math::Vector<3> accel_offs_vec(accel_offs[uorb_index]);
math::Vector<3> accel_offs_rotated = board_rotation_t * accel_offs_vec;
math::Matrix<3, 3> accel_T_mat(accel_T[uorb_index]);
math::Matrix<3, 3> accel_T_rotated = board_rotation_t * accel_T_mat * board_rotation;
accel_scale.x_offset = accel_offs_rotated(0);
accel_scale.x_scale = accel_T_rotated(0, 0);
accel_scale.y_offset = accel_offs_rotated(1);
accel_scale.y_scale = accel_T_rotated(1, 1);
accel_scale.z_offset = accel_offs_rotated(2);
accel_scale.z_scale = accel_T_rotated(2, 2);
bool failed = false;
failed = failed || (PX4_OK != param_set_no_notification(param_find("CAL_ACC_PRIME"), &(device_id_primary)));
PX4_INFO("found offset %d: x: %.6f, y: %.6f, z: %.6f", uorb_index,
(double)accel_scale.x_offset,
(double)accel_scale.y_offset,
(double)accel_scale.z_offset);
PX4_INFO("found scale %d: x: %.6f, y: %.6f, z: %.6f", uorb_index,
(double)accel_scale.x_scale,
(double)accel_scale.y_scale,
(double)accel_scale.z_scale);
/* check if thermal compensation is enabled */
int32_t tc_enabled_int;
param_get(param_find("TC_A_ENABLE"), &(tc_enabled_int));
if (tc_enabled_int == 1) {
/* Get struct containing sensor thermal compensation data */
struct sensor_correction_s sensor_correction; /**< sensor thermal corrections */
memset(&sensor_correction, 0, sizeof(sensor_correction));
int sensor_correction_sub = orb_subscribe(ORB_ID(sensor_correction));
orb_copy(ORB_ID(sensor_correction), sensor_correction_sub, &sensor_correction);
orb_unsubscribe(sensor_correction_sub);
/* don't allow a parameter instance to be calibrated more than once by another uORB instance */
if (!tc_locked[sensor_correction.accel_mapping[uorb_index]]) {
tc_locked[sensor_correction.accel_mapping[uorb_index]] = true;
/* update the _X0_ terms to include the additional offset */
int32_t handle;
float val;
for (unsigned axis_index = 0; axis_index < 3; axis_index++) {
val = 0.0f;
(void)sprintf(str, "TC_A%u_X0_%u", sensor_correction.accel_mapping[uorb_index], axis_index);
handle = param_find(str);
param_get(handle, &val);
if (axis_index == 0) {
val += accel_scale.x_offset;
} else if (axis_index == 1) {
val += accel_scale.y_offset;
} else if (axis_index == 2) {
val += accel_scale.z_offset;
}
failed |= (PX4_OK != param_set_no_notification(handle, &val));
}
/* update the _SCL_ terms to include the scale factor */
for (unsigned axis_index = 0; axis_index < 3; axis_index++) {
val = 1.0f;
(void)sprintf(str, "TC_A%u_SCL_%u", sensor_correction.accel_mapping[uorb_index], axis_index);
handle = param_find(str);
if (axis_index == 0) {
val = accel_scale.x_scale;
} else if (axis_index == 1) {
val = accel_scale.y_scale;
} else if (axis_index == 2) {
val = accel_scale.z_scale;
}
failed |= (PX4_OK != param_set_no_notification(handle, &val));
}
param_notify_changes();
}
// Ensure the calibration values used by the driver are at default settings when we are using thermal calibration data
accel_scale.x_offset = 0.f;
accel_scale.y_offset = 0.f;
accel_scale.z_offset = 0.f;
accel_scale.x_scale = 1.f;
accel_scale.y_scale = 1.f;
accel_scale.z_scale = 1.f;
}
// save the driver level calibration data
(void)sprintf(str, "CAL_ACC%u_XOFF", uorb_index);
failed |= (PX4_OK != param_set_no_notification(param_find(str), &(accel_scale.x_offset)));
(void)sprintf(str, "CAL_ACC%u_YOFF", uorb_index);
failed |= (PX4_OK != param_set_no_notification(param_find(str), &(accel_scale.y_offset)));
(void)sprintf(str, "CAL_ACC%u_ZOFF", uorb_index);
failed |= (PX4_OK != param_set_no_notification(param_find(str), &(accel_scale.z_offset)));
(void)sprintf(str, "CAL_ACC%u_XSCALE", uorb_index);
failed |= (PX4_OK != param_set_no_notification(param_find(str), &(accel_scale.x_scale)));
(void)sprintf(str, "CAL_ACC%u_YSCALE", uorb_index);
failed |= (PX4_OK != param_set_no_notification(param_find(str), &(accel_scale.y_scale)));
(void)sprintf(str, "CAL_ACC%u_ZSCALE", uorb_index);
failed |= (PX4_OK != param_set_no_notification(param_find(str), &(accel_scale.z_scale)));
(void)sprintf(str, "CAL_ACC%u_ID", uorb_index);
failed |= (PX4_OK != param_set_no_notification(param_find(str), &(device_id[uorb_index])));
if (failed) {
calibration_log_critical(mavlink_log_pub, CAL_ERROR_SET_PARAMS_MSG, uorb_index);
return PX4_ERROR;
}
#ifdef __PX4_NUTTX
sprintf(str, "%s%u", ACCEL_BASE_DEVICE_PATH, uorb_index);
fd = px4_open(str, 0);
if (fd < 0) {
calibration_log_critical(mavlink_log_pub, CAL_QGC_FAILED_MSG, "sensor does not exist");
res = PX4_ERROR;
} else {
res = px4_ioctl(fd, ACCELIOCSSCALE, (long unsigned int)&accel_scale);
px4_close(fd);
}
if (res != PX4_OK) {
calibration_log_critical(mavlink_log_pub, CAL_ERROR_APPLY_CAL_MSG, uorb_index);
}
#endif
}
if (res == PX4_OK) {
/* if there is a any preflight-check system response, let the barrage of messages through */
usleep(200000);
calibration_log_info(mavlink_log_pub, CAL_QGC_DONE_MSG, sensor_name);
} else {
calibration_log_critical(mavlink_log_pub, CAL_QGC_FAILED_MSG, sensor_name);
}
/* give this message enough time to propagate */
usleep(600000);
return res;
}
int do_accel_calibration(int mavlink_fd)
{
int fd;
mavlink_log_info(mavlink_fd, CAL_STARTED_MSG, sensor_name);
struct accel_scale accel_scale = {
0.0f,
1.0f,
0.0f,
1.0f,
0.0f,
1.0f,
};
int res = OK;
/* reset all offsets to zero and all scales to one */
fd = open(ACCEL_DEVICE_PATH, 0);
res = ioctl(fd, ACCELIOCSSCALE, (long unsigned int)&accel_scale);
close(fd);
if (res != OK) {
mavlink_log_critical(mavlink_fd, CAL_FAILED_RESET_CAL_MSG);
}
float accel_offs[3];
float accel_T[3][3];
if (res == OK) {
/* measure and calculate offsets & scales */
res = do_accel_calibration_measurements(mavlink_fd, accel_offs, accel_T);
}
if (res == OK) {
/* measurements completed successfully, rotate calibration values */
param_t board_rotation_h = param_find("SENS_BOARD_ROT");
int32_t board_rotation_int;
param_get(board_rotation_h, &(board_rotation_int));
enum Rotation board_rotation_id = (enum Rotation)board_rotation_int;
math::Matrix<3, 3> board_rotation;
get_rot_matrix(board_rotation_id, &board_rotation);
math::Matrix<3, 3> board_rotation_t = board_rotation.transposed();
math::Vector<3> accel_offs_vec(&accel_offs[0]);
math::Vector<3> accel_offs_rotated = board_rotation_t *accel_offs_vec;
math::Matrix<3, 3> accel_T_mat(&accel_T[0][0]);
math::Matrix<3, 3> accel_T_rotated = board_rotation_t *accel_T_mat * board_rotation;
accel_scale.x_offset = accel_offs_rotated(0);
accel_scale.x_scale = accel_T_rotated(0, 0);
accel_scale.y_offset = accel_offs_rotated(1);
accel_scale.y_scale = accel_T_rotated(1, 1);
accel_scale.z_offset = accel_offs_rotated(2);
accel_scale.z_scale = accel_T_rotated(2, 2);
/* set parameters */
if (param_set(param_find("SENS_ACC_XOFF"), &(accel_scale.x_offset))
|| param_set(param_find("SENS_ACC_YOFF"), &(accel_scale.y_offset))
|| param_set(param_find("SENS_ACC_ZOFF"), &(accel_scale.z_offset))
|| param_set(param_find("SENS_ACC_XSCALE"), &(accel_scale.x_scale))
|| param_set(param_find("SENS_ACC_YSCALE"), &(accel_scale.y_scale))
|| param_set(param_find("SENS_ACC_ZSCALE"), &(accel_scale.z_scale))) {
mavlink_log_critical(mavlink_fd, CAL_FAILED_SET_PARAMS_MSG);
res = ERROR;
}
}
if (res == OK) {
/* apply new scaling and offsets */
fd = open(ACCEL_DEVICE_PATH, 0);
res = ioctl(fd, ACCELIOCSSCALE, (long unsigned int)&accel_scale);
close(fd);
if (res != OK) {
mavlink_log_critical(mavlink_fd, CAL_FAILED_APPLY_CAL_MSG);
}
}
if (res == OK) {
/* auto-save to EEPROM */
res = param_save_default();
if (res != OK) {
mavlink_log_critical(mavlink_fd, CAL_FAILED_SAVE_PARAMS_MSG);
}
}
if (res == OK) {
mavlink_log_info(mavlink_fd, CAL_DONE_MSG, sensor_name);
} else {
mavlink_log_info(mavlink_fd, CAL_FAILED_MSG, sensor_name);
}
return res;
}