static int acpi_pci_bind(struct acpi_device *device)
{
ACPI_STATUS status;
ACPI_HANDLE handle;
struct pci_bus *bus;
struct pci_dev *dev;
dev = acpi_get_pci_dev(device->handle);
if (!dev)
return 0;
device->pci_dev = dev;
dev->acpi_dev = device;
dbgprintf("bind ACPI %s PCI_%x_%x\n", device->pnp.bus_id,
dev->vendor, dev->device);
// pci_acpi_add_pm_notifier(device, dev);
// if (device->wakeup.flags.run_wake)
// device_set_run_wake(&dev->dev, true);
/*
* Install the 'bind' function to facilitate callbacks for
* children of the P2P bridge.
*/
if (dev->subordinate) {
ACPI_DEBUG_PRINT((ACPI_DB_INFO,
"Device %04x:%02x:%02x.%d is a PCI bridge\n",
pci_domain_nr(dev->bus), dev->bus->number,
PCI_SLOT(dev->devfn), PCI_FUNC(dev->devfn)));
device->ops.bind = acpi_pci_bind;
device->ops.unbind = acpi_pci_unbind;
}
/*
* Evaluate and parse _PRT, if exists. This code allows parsing of
* _PRT objects within the scope of non-bridge devices. Note that
* _PRTs within the scope of a PCI bridge assume the bridge's
* subordinate bus number.
*
* TBD: Can _PRTs exist within the scope of non-bridge PCI devices?
*/
status = AcpiGetHandle(device->handle, METHOD_NAME__PRT, &handle);
if (ACPI_FAILURE(status))
goto out;
if (dev->subordinate)
bus = dev->subordinate;
else
bus = dev->bus;
acpi_pci_irq_add_prt(device->handle, bus);
out:
// pci_dev_put(dev);
return 0;
}
static int acpi_pci_bind(struct acpi_device *device)
{
acpi_status status;
acpi_handle handle;
unsigned char bus;
struct pci_dev *dev;
dev = acpi_get_pci_dev(device->handle);
if (!dev)
return 0;
pci_acpi_add_pm_notifier(device, dev);
acpi_power_resource_register_device(&dev->dev, device->handle);
if (device->wakeup.flags.run_wake)
device_set_run_wake(&dev->dev, true);
/*
* Install the 'bind' function to facilitate callbacks for
* children of the P2P bridge.
*/
if (dev->subordinate) {
ACPI_DEBUG_PRINT((ACPI_DB_INFO,
"Device %04x:%02x:%02x.%d is a PCI bridge\n",
pci_domain_nr(dev->bus), dev->bus->number,
PCI_SLOT(dev->devfn), PCI_FUNC(dev->devfn)));
device->ops.bind = acpi_pci_bind;
device->ops.unbind = acpi_pci_unbind;
}
/*
* Evaluate and parse _PRT, if exists. This code allows parsing of
* _PRT objects within the scope of non-bridge devices. Note that
* _PRTs within the scope of a PCI bridge assume the bridge's
* subordinate bus number.
*
* TBD: Can _PRTs exist within the scope of non-bridge PCI devices?
*/
status = acpi_get_handle(device->handle, METHOD_NAME__PRT, &handle);
if (ACPI_FAILURE(status))
goto out;
if (dev->subordinate)
bus = dev->subordinate->number;
else
bus = dev->bus->number;
acpi_pci_irq_add_prt(device->handle, pci_domain_nr(dev->bus), bus);
out:
pci_dev_put(dev);
return 0;
}
int acpi_pci_bind(struct acpi_device *device)
{
int result = 0;
acpi_status status;
struct acpi_pci_data *data;
struct acpi_pci_data *pdata;
struct acpi_buffer buffer = { ACPI_ALLOCATE_BUFFER, NULL };
acpi_handle handle;
if (!device || !device->parent)
return -EINVAL;
data = kzalloc(sizeof(struct acpi_pci_data), GFP_KERNEL);
if (!data)
return -ENOMEM;
status = acpi_get_name(device->handle, ACPI_FULL_PATHNAME, &buffer);
if (ACPI_FAILURE(status)) {
kfree(data);
return -ENODEV;
}
ACPI_DEBUG_PRINT((ACPI_DB_INFO, "Binding PCI device [%s]...\n",
(char *)buffer.pointer));
/*
* Segment & Bus
* -------------
* These are obtained via the parent device's ACPI-PCI context.
*/
status = acpi_get_data(device->parent->handle, acpi_pci_data_handler,
(void **)&pdata);
if (ACPI_FAILURE(status) || !pdata || !pdata->bus) {
ACPI_EXCEPTION((AE_INFO, status,
"Invalid ACPI-PCI context for parent device %s",
acpi_device_bid(device->parent)));
result = -ENODEV;
goto end;
}
data->id.segment = pdata->id.segment;
data->id.bus = pdata->bus->number;
/*
* Device & Function
* -----------------
* These are simply obtained from the device's _ADR method. Note
* that a value of zero is valid.
*/
data->id.device = device->pnp.bus_address >> 16;
data->id.function = device->pnp.bus_address & 0xFFFF;
ACPI_DEBUG_PRINT((ACPI_DB_INFO, "...to %04x:%02x:%02x.%d\n",
data->id.segment, data->id.bus, data->id.device,
data->id.function));
/*
* TBD: Support slot devices (e.g. function=0xFFFF).
*/
/*
* Locate PCI Device
* -----------------
* Locate matching device in PCI namespace. If it doesn't exist
* this typically means that the device isn't currently inserted
* (e.g. docking station, port replicator, etc.).
*/
data->dev = pci_get_slot(pdata->bus,
PCI_DEVFN(data->id.device, data->id.function));
if (!data->dev) {
ACPI_DEBUG_PRINT((ACPI_DB_INFO,
"Device %04x:%02x:%02x.%d not present in PCI namespace\n",
data->id.segment, data->id.bus,
data->id.device, data->id.function));
result = -ENODEV;
goto end;
}
if (!data->dev->bus) {
printk(KERN_ERR PREFIX
"Device %04x:%02x:%02x.%d has invalid 'bus' field\n",
data->id.segment, data->id.bus,
data->id.device, data->id.function);
result = -ENODEV;
goto end;
}
/*
* PCI Bridge?
* -----------
* If so, set the 'bus' field and install the 'bind' function to
* facilitate callbacks for all of its children.
*/
if (data->dev->subordinate) {
ACPI_DEBUG_PRINT((ACPI_DB_INFO,
"Device %04x:%02x:%02x.%d is a PCI bridge\n",
data->id.segment, data->id.bus,
data->id.device, data->id.function));
data->bus = data->dev->subordinate;
device->ops.bind = acpi_pci_bind;
device->ops.unbind = acpi_pci_unbind;
}
/*
* Attach ACPI-PCI Context
* -----------------------
* Thus binding the ACPI and PCI devices.
*/
status = acpi_attach_data(device->handle, acpi_pci_data_handler, data);
if (ACPI_FAILURE(status)) {
ACPI_EXCEPTION((AE_INFO, status,
"Unable to attach ACPI-PCI context to device %s",
acpi_device_bid(device)));
result = -ENODEV;
goto end;
}
/*
* PCI Routing Table
* -----------------
* Evaluate and parse _PRT, if exists. This code is independent of
* PCI bridges (above) to allow parsing of _PRT objects within the
* scope of non-bridge devices. Note that _PRTs within the scope of
* a PCI bridge assume the bridge's subordinate bus number.
*
* TBD: Can _PRTs exist within the scope of non-bridge PCI devices?
*/
status = acpi_get_handle(device->handle, METHOD_NAME__PRT, &handle);
if (ACPI_SUCCESS(status)) {
if (data->bus) /* PCI-PCI bridge */
acpi_pci_irq_add_prt(device->handle, data->id.segment,
data->bus->number);
else /* non-bridge PCI device */
acpi_pci_irq_add_prt(device->handle, data->id.segment,
data->id.bus);
}
end:
kfree(buffer.pointer);
if (result) {
pci_dev_put(data->dev);
kfree(data);
}
return result;
}
