/**
* \brief Initialize ADC.
*/
static void demo_config_adc( void )
{
/* Enable peripheral clock. */
pmc_enable_periph_clk(ID_ADC);
/* Initialize ADC. */
/*
* Formula: ADCClock = MCK / ( (PRESCAL+1) * 2 )
* For example, MCK = 64MHZ, PRESCAL = 4, then:
* ADCClock = 64 / ((4+1) * 2) = 6.4MHz;
*/
/* Formula:
* Startup Time = startup value / ADCClock
* Startup time = 64 / 6.4MHz = 10 us
*/
adc_init(ADC, sysclk_get_cpu_hz(), 6400000, ADC_STARTUP_TIME_4);
/* Formula:
* Transfer Time = (TRANSFER * 2 + 3) / ADCClock
* Tracking Time = (TRACKTIM + 1) / ADCClock
* Settling Time = settling value / ADCClock
*
* Transfer Time = (1 * 2 + 3) / 6.4MHz = 781 ns
* Tracking Time = (1 + 1) / 6.4MHz = 312 ns
* Settling Time = 3 / 6.4MHz = 469 ns
*/
adc_configure_timing(ADC, TRACKING_TIME, ADC_SETTLING_TIME_3, TRANSFER_PERIOD);
adc_check(ADC, sysclk_get_cpu_hz());
/* Hardware trigger TIOA0. */
adc_configure_trigger(ADC, ADC_TRIG_TIO_CH_1, 0);
/* Enable channels for x,y and z. */
adc_enable_channel(ADC, ADC_CHANNEL_POTENTIOMETER);
/* Configure TC. */
demo_configure_tc0();
}
/**
* \brief Initialize ADC.
*/
static void demo_config_adc( void )
{
/* Enable peripheral clock. */
pmc_enable_periph_clk(ID_ADC);
/* Initialize ADC. */
/* startup = 10: 640 periods of ADCClock
* for prescale = 4
* prescale: ADCClock = MCK / ( (PRESCAL+1) * 2 ) => 64MHz /
* ((4+1)*2) = 6.4MHz
* ADC clock = 6.4 MHz
*/
adc_init(ADC, sysclk_get_cpu_hz(), 6400000, 10);
adc_configure_timing(ADC, 0, ADC_SETTLING_TIME_3, 1);
adc_check(ADC, sysclk_get_cpu_hz());
/* Hardware trigger TIOA0. */
adc_configure_trigger(ADC, ADC_TRIG_TIO_CH_1, 0);
/* Enable channels for x,y and z. */
adc_enable_channel(ADC, ADC_CHANNEL_POTENTIOMETER);
/* Configure TC. */
demo_configure_tc0();
}
/**
* \brief adc_temp_sensor Application entry point.
*
* Initialize adc to 12-bit, enable channel 15,turn on
* temp sensor, pdc channel interrupt for temp sensor
* and start conversion.
*
* \return Unused (ANSI-C compatibility).
*/
int main(void)
{
/* Initialize the SAM system. */
sysclk_init();
board_init();
/* Disable watchdog. */
WDT->WDT_MR = WDT_MR_WDDIS;
configure_console();
/* Output example information. */
puts(STRING_HEADER);
/* 10 ms timer */
if (SysTick_Config(sysclk_get_cpu_hz() / 100)) {
puts("-F- Systick configuration error\r");
while (1) {
}
}
/* Enable peripheral clock. */
pmc_enable_periph_clk(ID_ADC);
/* Initialize ADC. */
/* startup = 8: 512 periods of ADCClock
* for prescale = 4
* prescale: ADCClock = MCK / ( (PRESCAL+1) * 2 ) => 64MHz / ((4+1)*2) = 6.4MHz
* ADC clock = 6.4 MHz
*/
adc_init(ADC, sysclk_get_cpu_hz(), 6400000, 8);
adc_configure_timing(ADC, 0, ADC_SETTLING_TIME_3, 1);
adc_configure_trigger(ADC, ADC_TRIG_SW, 0);
adc_check(ADC, sysclk_get_cpu_hz());
/* Enable channel for potentiometer. */
adc_enable_channel(ADC, ADC_TEMPERATURE_SENSOR);
/* Enable the temperature sensor. */
adc_enable_ts(ADC);
/* Enable ADC interrupt. */
NVIC_EnableIRQ(ADC_IRQn);
/* Start conversion. */
adc_start(ADC);
adc_read_buffer(ADC, gs_s_adc_values, BUFFER_SIZE);
/* Enable PDC channel interrupt. */
adc_enable_interrupt(ADC, ADC_ISR_RXBUFF);
while (1) {
}
}
void rt_adc_thread_entry(void* parameter)
{
rt_thread_t init_thread;
u16 k;
rt_hw_adc_init();
//adc_io_pin_init();
while(1)
{
adc_check();
rt_thread_delay(RT_TICK_PER_SECOND/2);
}
}
void poll_adc(void)
{
uint8_t i = poll_this;
adc_t *pp;
if (i >= N_ADC) {
i=0;
adc_changed_cache = max_seen;
max_seen=0;
}
pp = &adcs[i];
if (adc_check(pp)) {
i += 1;
if (pp->flags & (ADC_IS_ALERT_L|ADC_IS_ALERT_H))
max_seen = i;
}
poll_this=i;
}
/**
* \brief Example entry point.
*
* Initialize ADC to 12-bit, enable channel "ADC_CHANNEL_POTENTIOMETER", then
* enable hardware trigger with TIOA0 every second. Finally, start conversion.
*
* \return Unused (ANSI-C compatibility).
*/
int main(void)
{
uint8_t c_choice;
int16_t s_adc_value;
int16_t s_threshold = 0;
/* Initialize the SAM system. */
sysclk_init();
board_init();
configure_console();
/* Output example information. */
puts(STRING_HEADER);
/* Initialize threshold. */
gs_us_low_threshold = 0x0;
gs_us_high_threshold = MAX_DIGITAL;
/* Enable peripheral clock. */
pmc_enable_periph_clk(ID_ADC);
/* Initialize ADC. */
/* startup = 10: 640 periods of ADCClock
* for prescale = 4
* prescale: ADCClock = MCK / ( (PRESCAL+1) * 2 ) => 64MHz / ((4+1)*2) = 6.4MHz
* ADC clock = 6.4 MHz
*/
adc_init(ADC, sysclk_get_cpu_hz(), 6400000, 10);
#if SAM3S || SAM3XA || SAM4S
adc_configure_timing(ADC, 0, ADC_SETTLING_TIME_3, 1);
#elif SAM3N
adc_configure_timing(ADC, 0);
#endif
adc_check(ADC, sysclk_get_cpu_hz());
/* Hardware trigger TIOA0. */
adc_configure_trigger(ADC, ADC_TRIG_TIO_CH_0, 0);
/* Enable channels for x,y and z. */
adc_enable_channel(ADC, ADC_CHANNEL_POTENTIOMETER);
/* Configure TC. */
configure_tc0();
/* Channel 5 has to be compared. */
adc_set_comparison_channel(ADC, ADC_CHANNEL_POTENTIOMETER);
/* Compare mode, in the window. */
adc_set_comparison_mode(ADC, ADC_EMR_CMPMODE_IN);
/* Set up Threshold. */
adc_set_comparison_window(ADC, gs_us_high_threshold, gs_us_low_threshold);
/* Enable ADC interrupt. */
NVIC_EnableIRQ(ADC_IRQn);
/* Start TC0 and hardware trigger. */
tc_start(TC0, 0);
/* Display main menu. */
display_menu();
while (1) {
while (uart_read(CONSOLE_UART, &c_choice)) {
}
printf("%c\r\n", c_choice);
switch (c_choice) {
case '0':
s_adc_value = adc_get_channel_value(ADC,
ADC_CHANNEL_POTENTIOMETER);
printf("-I- Current voltage is %d mv, %d%% of ADVREF\n\r",
(s_adc_value * VOLT_REF / MAX_DIGITAL), (s_adc_value * 100 / MAX_DIGITAL));
break;
case '1':
puts("Low threshold is set to(mv):");
s_threshold = get_voltage();
puts("\r");
if (s_threshold >= 0) {
s_adc_value = s_threshold * MAX_DIGITAL /
VOLT_REF;
adc_set_comparison_window(ADC, s_adc_value,
gs_us_high_threshold);
/* Renew low threshold. */
gs_us_low_threshold = s_adc_value;
float f_low_threshold = (float)gs_us_low_threshold * VOLT_REF / MAX_DIGITAL;
uint32_t ul_low_threshold = f_to_int(f_low_threshold);
printf("Setting low threshold to %u mv (reg value to 0x%x ~%d%%)\n\r",
ul_low_threshold,
gs_us_low_threshold,
gs_us_low_threshold * 100 / MAX_DIGITAL);
}
break;
case '2':
puts("High threshold is set to(mv):");
s_threshold = get_voltage();
puts("\r");
if (s_threshold >= 0) {
s_adc_value = s_threshold * MAX_DIGITAL /
VOLT_REF;
adc_set_comparison_window(ADC, gs_us_low_threshold,
s_adc_value);
/* Renew high threshold. */
gs_us_high_threshold = s_adc_value;
float f_high_threshold = (float)gs_us_high_threshold * VOLT_REF / MAX_DIGITAL;
uint32_t ul_high_threshold = f_to_int(f_high_threshold);
printf("Setting high threshold to %u mv (reg value to 0x%x ~%d%%)\n\r",
ul_high_threshold,
gs_us_high_threshold,
gs_us_high_threshold * 100 / MAX_DIGITAL);
}
break;
case '3':
puts("-a. Below low threshold.\n\r"
"-b. Above high threshold.\n\r"
"-c. In the comparison window.\n\r"
"-d. Out of the comparison window.\n\r"
"-q. Quit the setting.\r");
c_choice = get_comparison_mode();
adc_set_comparison_mode(ADC, c_choice);
printf("Comparison mode is %c.\n\r", 'a' + c_choice);
break;
case 'm':
case 'M':
display_menu();
break;
case 'i':
case 'I':
display_info();
break;
case 's':
case 'S':
enter_asleep();
break;
}
puts("Press \'m\' or \'M\' to display the main menu again!\r");
}
}
