예제 #1
0
static int __devexit adp5520_bl_remove(struct platform_device *pdev)
{
	struct backlight_device *bl = platform_get_drvdata(pdev);
	struct adp5520_bl *data = bl_get_data(bl);

	adp5520_clr_bits(data->master, MODE_STATUS, BL_EN);

	if (data->pdata->en_ambl_sens)
		sysfs_remove_group(&bl->dev.kobj,
				&adp5520_bl_attr_group);

	backlight_device_unregister(bl);
	kfree(data);

	return 0;
}
예제 #2
0
파일: gpio-adp5520.c 프로젝트: 020gzh/linux
static int adp5520_gpio_direction_output(struct gpio_chip *chip,
		unsigned off, int val)
{
	struct adp5520_gpio *dev;
	int ret = 0;
	dev = gpiochip_get_data(chip);

	set_bit(off, &dev->output);

	if (val)
		ret |= adp5520_set_bits(dev->master, ADP5520_GPIO_OUT,
					dev->lut[off]);
	else
		ret |= adp5520_clr_bits(dev->master, ADP5520_GPIO_OUT,
					dev->lut[off]);

	ret |= adp5520_set_bits(dev->master, ADP5520_GPIO_CFG_2,
					dev->lut[off]);

	return ret;
}
예제 #3
0
파일: gpio-adp5520.c 프로젝트: 020gzh/linux
static int adp5520_gpio_probe(struct platform_device *pdev)
{
	struct adp5520_gpio_platform_data *pdata = dev_get_platdata(&pdev->dev);
	struct adp5520_gpio *dev;
	struct gpio_chip *gc;
	int ret, i, gpios;
	unsigned char ctl_mask = 0;

	if (pdata == NULL) {
		dev_err(&pdev->dev, "missing platform data\n");
		return -ENODEV;
	}

	if (pdev->id != ID_ADP5520) {
		dev_err(&pdev->dev, "only ADP5520 supports GPIO\n");
		return -ENODEV;
	}

	dev = devm_kzalloc(&pdev->dev, sizeof(*dev), GFP_KERNEL);
	if (dev == NULL)
		return -ENOMEM;

	dev->master = pdev->dev.parent;

	for (gpios = 0, i = 0; i < ADP5520_MAXGPIOS; i++)
		if (pdata->gpio_en_mask & (1 << i))
			dev->lut[gpios++] = 1 << i;

	if (gpios < 1) {
		ret = -EINVAL;
		goto err;
	}

	gc = &dev->gpio_chip;
	gc->direction_input  = adp5520_gpio_direction_input;
	gc->direction_output = adp5520_gpio_direction_output;
	gc->get = adp5520_gpio_get_value;
	gc->set = adp5520_gpio_set_value;
	gc->can_sleep = true;

	gc->base = pdata->gpio_start;
	gc->ngpio = gpios;
	gc->label = pdev->name;
	gc->owner = THIS_MODULE;

	ret = adp5520_clr_bits(dev->master, ADP5520_GPIO_CFG_1,
		pdata->gpio_en_mask);

	if (pdata->gpio_en_mask & ADP5520_GPIO_C3)
		ctl_mask |= ADP5520_C3_MODE;

	if (pdata->gpio_en_mask & ADP5520_GPIO_R3)
		ctl_mask |= ADP5520_R3_MODE;

	if (ctl_mask)
		ret = adp5520_set_bits(dev->master, ADP5520_LED_CONTROL,
			ctl_mask);

	ret |= adp5520_set_bits(dev->master, ADP5520_GPIO_PULLUP,
		pdata->gpio_pullup_mask);

	if (ret) {
		dev_err(&pdev->dev, "failed to write\n");
		goto err;
	}

	ret = devm_gpiochip_add_data(&pdev->dev, &dev->gpio_chip, dev);
	if (ret)
		goto err;

	platform_set_drvdata(pdev, dev);
	return 0;

err:
	return ret;
}