void analogout_init(dac_t *obj, PinName pin)
{
DAC_ChannelConfTypeDef sConfig;
// Get the peripheral name from the pin and assign it to the object
obj->dac = (DACName)pinmap_peripheral(pin, PinMap_DAC);
MBED_ASSERT(obj->dac != (DACName)NC);
// Configure GPIO
pinmap_pinout(pin, PinMap_DAC);
// Save the pin for future use
obj->pin = pin;
// Enable DAC clock
__DAC1_CLK_ENABLE();
// Configure DAC
DacHandle.Instance = (DAC_TypeDef *)(obj->dac);
sConfig.DAC_Trigger = DAC_TRIGGER_NONE;
sConfig.DAC_OutputBuffer = DAC_OUTPUTBUFFER_DISABLE;
HAL_DAC_ConfigChannel(&DacHandle, &sConfig, DAC_CHANNEL_1);
analogout_write_u16(obj, 0);
}
/** Initialize the analogout peripheral
*
* Configures the pin used by analogout.
* @param obj The analogout object to initialize
* @param pin The analogout pin name
*/
void analogout_init(dac_t *obj, PinName pin)
{
/* get the peripheral name from the pin and assign it to the object */
obj->dac = (DACName)pinmap_peripheral(pin, PinMap_DAC);
MBED_ASSERT(obj->dac != (DACName)NC);
/* get the pin function and assign the used channel to the object */
uint32_t function = pinmap_function(pin, PinMap_DAC);
MBED_ASSERT(function != (uint32_t)NC);
obj->channel = GD_PIN_CHANNEL_GET(function);
MBED_ASSERT(obj->channel <= DAC1);
/* configure GPIO */
pinmap_pinout(pin, PinMap_DAC);
/* save the pin for future use */
obj->pin = pin;
/* enable DAC clock */
rcu_periph_clock_enable(RCU_DAC);
/* configure DAC */
dac_wave_mode_config(obj->channel, DAC_WAVE_DISABLE);
dac_trigger_disable(obj->channel);
dac_output_buffer_enable(obj->channel);
analogout_write_u16(obj, 0);
}
void analogout_init(dac_t *obj, PinName pin) {
DAC_ChannelConfTypeDef sConfig;
DacHandle.Instance = DAC;
// Get the peripheral name (DAC_1, ...) from the pin and assign it to the object
obj->dac = (DACName)pinmap_peripheral(pin, PinMap_DAC);
if (obj->dac == (DACName)NC) {
error("DAC pin mapping failed");
}
// Configure GPIO
pinmap_pinout(pin, PinMap_DAC);
// Save the channel for future use
obj->pin = pin;
// Enable DAC clock
__DAC_CLK_ENABLE();
// Configure DAC
sConfig.DAC_Trigger = DAC_TRIGGER_NONE;
sConfig.DAC_OutputBuffer = DAC_OUTPUTBUFFER_DISABLE;
HAL_DAC_ConfigChannel(&DacHandle, &sConfig, DAC_CHANNEL_1);
analogout_write_u16(obj, 0);
}
void analogout_init(dac_t *obj, PinName pin)
{
DAC_ChannelConfTypeDef sConfig;
DacHandle.Instance = DAC;
// Get the peripheral name (DAC_1, ...) from the pin and assign it to the object
obj->dac = (DACName)pinmap_peripheral(pin, PinMap_DAC);
MBED_ASSERT(obj->dac != (DACName)NC);
// Configure GPIO
pinmap_pinout(pin, PinMap_DAC);
// Save the channel for future use
obj->pin = pin;
// Enable DAC clock
__DAC_CLK_ENABLE();
// Configure DAC
sConfig.DAC_Trigger = DAC_TRIGGER_NONE;
sConfig.DAC_OutputBuffer = DAC_OUTPUTBUFFER_DISABLE;
if (pin == PA_4) {
HAL_DAC_ConfigChannel(&DacHandle, &sConfig, DAC_CHANNEL_1);
pa4_used = 1;
} else { // PA_5
HAL_DAC_ConfigChannel(&DacHandle, &sConfig, DAC_CHANNEL_2);
pa5_used = 1;
}
analogout_write_u16(obj, 0);
}
void analogout_init(dac_t *obj, PinName pin) {
DAC_TypeDef *dac;
DAC_InitTypeDef DAC_InitStructure;
// Get the peripheral name (DAC_1, ...) from the pin and assign it to the object
obj->dac = (DACName)pinmap_peripheral(pin, PinMap_DAC);
if (obj->dac == (DACName)NC) {
error("DAC pin mapping failed");
}
dac = (DAC_TypeDef *)(obj->dac);
// Configure GPIO
pinmap_pinout(pin, PinMap_DAC);
// Save the channel for future use
obj->pin = pin;
// Enable DAC clock
RCC_APB1PeriphClockCmd(RCC_APB1Periph_DAC, ENABLE);
// Configure and enable DAC channel
DAC_StructInit(&DAC_InitStructure);
DAC_Init(dac, DAC_Channel_1, &DAC_InitStructure);
DAC_Cmd(dac, DAC_Channel_1, ENABLE);
analogout_write_u16(obj, 0);
}
void analogout_init(dac_t *obj, PinName pin)
{
DAC_ChannelConfTypeDef sConfig;
// Get the peripheral name from the pin and assign it to the object
obj->dac = (DACName)pinmap_peripheral(pin, PinMap_DAC);
MBED_ASSERT(obj->dac != (DACName)NC);
// Get the pin function and assign the used channel to the object
uint32_t function = pinmap_function(pin, PinMap_DAC);
MBED_ASSERT(function != (uint32_t)NC);
obj->channel = STM_PIN_CHANNEL(function);
// Configure GPIO
pinmap_pinout(pin, PinMap_DAC);
// Save the pin for future use
obj->pin = pin;
// Enable DAC clock
if (obj->dac == DAC_1) {
__DAC1_CLK_ENABLE();
}
#if defined(DAC2)
if (obj->dac == DAC_2) {
__DAC2_CLK_ENABLE();
}
#endif
// Configure DAC
DacHandle.Instance = (DAC_TypeDef *)(obj->dac);
sConfig.DAC_Trigger = DAC_TRIGGER_NONE;
sConfig.DAC_OutputBuffer = DAC_OUTPUTBUFFER_DISABLE;
if (pin == PA_4) {
HAL_DAC_ConfigChannel(&DacHandle, &sConfig, DAC_CHANNEL_1);
pa4_used = 1;
}
#if defined(DAC_CHANNEL_2)
if (pin == PA_5) {
HAL_DAC_ConfigChannel(&DacHandle, &sConfig, DAC_CHANNEL_2);
pa5_used = 1;
}
#endif
if (pin == PA_6) {
HAL_DAC_ConfigChannel(&DacHandle, &sConfig, DAC_CHANNEL_1);
}
analogout_write_u16(obj, 0);
}
void analogout_init(dac_t *obj, PinName pin) {
obj->dac = (DACName)pinmap_peripheral(pin, PinMap_DAC);
MBED_ASSERT(obj->dac != (DACName)NC);
// DAC enable bit must be set
LPC_IOCON->P0_26 |= (1 << 16); // DACEN
// map out (must be done before accessing registers)
pinmap_pinout(pin, PinMap_DAC);
analogout_write_u16(obj, 0);
}
void analogout_init(dac_t *obj, PinName pin) {
if (pin != P0_12) {
error("DAC pin mapping failed");
}
LPC_SYSCON->SYSAHBCLKCTRL0 |= (1 << 29);
LPC_SYSCON->PDRUNCFG &= ~(1 << 12);
LPC_IOCON->PIO0_12 = 0;
LPC_SWM->PINENABLE0 &= ~(1 << 24);
LPC_DAC->CTRL = 0;
analogout_write_u16(obj, 0);
}
void analogout_init(dac_t *obj, PinName pin) {
DAC_ChannelConfTypeDef sConfig = {0};
// Get the peripheral name (DAC_1, ...) from the pin and assign it to the object
obj->dac = (DACName)pinmap_peripheral(pin, PinMap_DAC);
// Get the functions (dac channel) from the pin and assign it to the object
uint32_t function = pinmap_function(pin, PinMap_DAC);
MBED_ASSERT(function != (uint32_t)NC);
// Save the channel for the write and read functions
switch (STM_PIN_CHANNEL(function)) {
case 1:
obj->channel = DAC_CHANNEL_1;
break;
#if defined(DAC_CHANNEL_2)
case 2:
obj->channel = DAC_CHANNEL_2;
break;
#endif
default:
error("Unknown DAC channel");
break;
}
if (obj->dac == (DACName)NC) {
error("DAC pin mapping failed");
}
// Configure GPIO
pinmap_pinout(pin, PinMap_DAC);
__HAL_RCC_GPIOA_CLK_ENABLE();
__HAL_RCC_DAC_CLK_ENABLE();
obj->handle.Instance = DAC;
obj->handle.State = HAL_DAC_STATE_RESET;
if (HAL_DAC_Init(&obj->handle) != HAL_OK ) {
error("HAL_DAC_Init failed");
}
sConfig.DAC_Trigger = DAC_TRIGGER_NONE;
sConfig.DAC_OutputBuffer = DAC_OUTPUTBUFFER_ENABLE;
if (HAL_DAC_ConfigChannel(&obj->handle, &sConfig, obj->channel) != HAL_OK) {
error("HAL_DAC_ConfigChannel failed");
}
analogout_write_u16(obj, 0);
}
void analogout_init(dac_t *obj, PinName pin)
{
DAC_ChannelConfTypeDef sConfig = {0};
// Get the peripheral name from the pin and assign it to the object
obj->dac = (DACName)pinmap_peripheral(pin, PinMap_DAC);
MBED_ASSERT(obj->dac != (DACName)NC);
// Get the pin function and assign the used channel to the object
uint32_t function = pinmap_function(pin, PinMap_DAC);
MBED_ASSERT(function != (uint32_t)NC);
obj->channel = STM_PIN_CHANNEL(function);
// Configure GPIO
pinmap_pinout(pin, PinMap_DAC);
// Save the pin for future use
obj->pin = pin;
// Enable DAC clock
__HAL_RCC_DAC1_CLK_ENABLE();
// Configure DAC
DacHandle.Instance = DAC;
if (HAL_DAC_Init(&DacHandle) != HAL_OK) {
error("Cannot initialize DAC\n");
}
sConfig.DAC_SampleAndHold = DAC_SAMPLEANDHOLD_DISABLE;
sConfig.DAC_Trigger = DAC_TRIGGER_NONE;
sConfig.DAC_OutputBuffer = DAC_OUTPUTBUFFER_ENABLE;
sConfig.DAC_ConnectOnChipPeripheral = DAC_CHIPCONNECT_DISABLE;
sConfig.DAC_UserTrimming = DAC_TRIMMING_FACTORY;
if (obj->channel == 2) {
if (HAL_DAC_ConfigChannel(&DacHandle, &sConfig, DAC_CHANNEL_2) != HAL_OK) {
error("Cannot configure DAC channel 2\n");
}
channel2_used = 1;
} else { // channel 1 per default
if (HAL_DAC_ConfigChannel(&DacHandle, &sConfig, DAC_CHANNEL_1) != HAL_OK) {
error("Cannot configure DAC channel 1\n");
}
obj->channel = 1;
channel1_used = 1;
}
analogout_write_u16(obj, 0);
}
void analogout_init(dac_t *obj, PinName pin) {
obj->dac = (DACName)pinmap_peripheral(pin, PinMap_DAC);
if (obj->dac == (DACName)NC) {
error("DAC pin mapping failed");
}
// power is on by default, set DAC clk divider is /4
LPC_SC->PCLKSEL0 &= ~(0x3 << 22);
// map out (must be done before accessing registers)
pinmap_pinout(pin, PinMap_DAC);
analogout_write_u16(obj, 0);
}
void analogout_init(dac_t *obj, PinName pin) {
obj->dac = (DACName)pinmap_peripheral(pin, PinMap_DAC);
if (obj->dac == (uint32_t)NC) {
error("DAC pin mapping failed");
}
// DAC enable bit must be set
LPC_IOCON->P0_26 |= (1 << 16); // DACEN
// map out (must be done before accessing registers)
pinmap_pinout(pin, PinMap_DAC);
analogout_write_u16(obj, 0);
}
void analogout_init(dac_t *obj, PinName pin) {
obj->dac = (DACName)pinmap_peripheral(pin, PinMap_DAC);
if (obj->dac == (DACName)NC) {
error("DAC pin mapping failed");
}
SIM->SCGC2 |= SIM_SCGC2_DAC0_MASK;
DAC0->DAT[obj->dac].DATH = 0;
DAC0->DAT[obj->dac].DATL = 0;
DAC0->C1 = DAC_C1_DACBFMD(2); // One-Time Scan Mode
DAC0->C0 = DAC_C0_DACEN_MASK // Enable
| DAC_C0_DACSWTRG_MASK // Software Trigger
| DAC_C0_DACRFS_MASK; // VDDA selected
analogout_write_u16(obj, 0);
}
void analogout_init(dac_t *obj, PinName pin) {
obj->dac = (DACName)pinmap_peripheral(pin, PinMap_DAC);
if (obj->dac == (uint32_t)NC) {
error("DAC pin mapping failed");
}
#if defined(TARGET_LPC1768) || defined(TARGET_LPC2368)
// power is on by default, set DAC clk divider is /4
LPC_SC->PCLKSEL0 &= ~(0x3 << 22);
#elif defined(TARGET_LPC4088)
// DAC enable bit must be set
LPC_IOCON->P0_26 |= (1 << 16); // DACEN
#endif
// map out (must be done before accessing registers)
pinmap_pinout(pin, PinMap_DAC);
analogout_write_u16(obj, 0);
}
void analogout_init(dac_t *obj, PinName pin) {
DAC_InitTypeDef DAC_InitStructure;
// Get the peripheral name (DAC_1, ...) from the pin and assign it to the object
obj->dac = (DACName)pinmap_peripheral(pin, PinMap_DAC);
if (obj->dac == (DACName)NC) {
error("DAC pin mapping failed");
}
// Configure GPIO
pinmap_pinout(pin, PinMap_DAC);
// Save the pin for future use
obj->pin = pin;
// Enable DAC clock
RCC_APB1PeriphClockCmd(RCC_APB1Periph_DAC, ENABLE);
// Configure and enable DAC channel
DAC_InitStructure.DAC_Trigger = DAC_Trigger_None;
DAC_InitStructure.DAC_WaveGeneration = DAC_WaveGeneration_None;
DAC_InitStructure.DAC_LFSRUnmask_TriangleAmplitude = DAC_LFSRUnmask_Bit0;
DAC_InitStructure.DAC_OutputBuffer = DAC_OutputBuffer_Disable;
if (obj->pin == PA_4) {
DAC_Init(DAC_Channel_1, &DAC_InitStructure);
DAC_Cmd(DAC_Channel_1, ENABLE);
}
if (obj->pin == PA_5) {
DAC_Init(DAC_Channel_2, &DAC_InitStructure);
DAC_Cmd(DAC_Channel_2, ENABLE);
}
analogout_write_u16(obj, 0);
}
//******************************************************************************
void analogout_write(dac_t *obj, float value)
{
analogout_write_u16(obj, (uint16_t)((value/1.0) * 0xFFFF));
}
void analogout_init(dac_t *obj, PinName pin)
{
DAC_ChannelConfTypeDef sConfig = {0};
// Get the peripheral name from the pin and assign it to the object
obj->dac = (DACName)pinmap_peripheral(pin, PinMap_DAC);
MBED_ASSERT(obj->dac != (DACName)NC);
// Get the pin function and assign the used channel to the object
uint32_t function = pinmap_function(pin, PinMap_DAC);
MBED_ASSERT(function != (uint32_t)NC);
// Save the channel for the write and read functions
switch (STM_PIN_CHANNEL(function)) {
case 1:
obj->channel = DAC_CHANNEL_1;
break;
#if defined(DAC_CHANNEL_2)
case 2:
obj->channel = DAC_CHANNEL_2;
break;
#endif
default:
error("Unknown DAC channel");
break;
}
// Configure GPIO
pinmap_pinout(pin, PinMap_DAC);
// Save the pin for future use
obj->pin = pin;
// Enable DAC clock
if (obj->dac == DAC_1) {
__HAL_RCC_DAC1_CLK_ENABLE();
}
#if defined(DAC2)
if (obj->dac == DAC_2) {
__HAL_RCC_DAC2_CLK_ENABLE();
}
#endif
// Configure DAC
obj->handle.Instance = (DAC_TypeDef *)(obj->dac);
obj->handle.State = HAL_DAC_STATE_RESET;
if (HAL_DAC_Init(&obj->handle) != HAL_OK) {
error("HAL_DAC_Init failed");
}
/* Enable both Buffer and Switch in the configuration,
* letting HAL layer in charge of selecting either one
* or the other depending on the actual DAC instance and
* channel being configured.
*/
sConfig.DAC_Trigger = DAC_TRIGGER_NONE;
sConfig.DAC_OutputBuffer = DAC_OUTPUTBUFFER_ENABLE;
#if defined(DAC_OUTPUTSWITCH_ENABLE)
sConfig.DAC_OutputSwitch = DAC_OUTPUTSWITCH_ENABLE;
#endif
if (pin == PA_4) {
pa4_used = 1;
}
if (pin == PA_5) {
pa5_used = 1;
}
if (HAL_DAC_ConfigChannel(&obj->handle, &sConfig, obj->channel) != HAL_OK) {
error("HAL_DAC_ConfigChannel failed");
}
analogout_write_u16(obj, 0);
}
