void OnePole::setup (double scale,
double pole,
double zero)
{
setOnePole (pole, zero);
applyScale (scale);
}
void Transformation::applySizeTransformation(SDL_Size size){
SDL_Point p;
p.x = size.width;
p.y = size.height;
applyScale(p);
size.width=p.x;
size.height=p.y;
}
void Transformation::applySizeTransformation(Uint16 &w, Uint16 &h) {
SDL_Point p;
p.x = w;
p.y = h;
applyScale(p);
w = p.x;
h = p.y;
}
void TwoPole::setup (double scale,
double poleRho,
double poleTheta,
double zeroRho,
double zeroTheta)
{
complex_t pole = std::polar (poleRho, poleTheta);
complex_t zero = std::polar (zeroRho, zeroTheta);
setTwoPole (pole, zero, std::conj(pole), std::conj(zero));
applyScale (scale);
}
void Cascade::setLayout (const LayoutBase& proto)
{
const int numPoles = proto.getNumPoles();
m_numStages = (numPoles + 1)/ 2;
assert (m_numStages <= m_maxStages);
Biquad* stage = m_stageArray;
for (int i = 0; i < m_numStages; ++i, ++stage)
stage->setPoleZeroPair (proto[i]);
applyScale (proto.getNormalGain() /
std::abs (response (proto.getNormalW() / (2 * doublePi))));
}
void Cascade::setLayout (const LayoutBase& proto)
{
const int numPoles = proto.getNumPoles();
m_numStages = (numPoles + 1)/ 2;
if (m_numStages > m_maxStages)
throw std::invalid_argument("Number of stages is larger than the max stages.");
Biquad* stage = m_stageArray;
for (int i = 0; i < m_numStages; ++i, ++stage)
stage->setPoleZeroPair (proto[i]);
applyScale (proto.getNormalGain() /
std::abs (response (proto.getNormalW() / (2 * doublePi))));
}
FITSHistogram::FITSHistogram(QWidget *parent) : QDialog(parent)
{
ui = new histogramUI(this);
tab = static_cast<FITSTab *> (parent);
type = FITS_AUTO;
customPlot = ui->histogramPlot;
customPlot->setBackground(QBrush(Qt::black));
customPlot->xAxis->setBasePen(QPen(Qt::white, 1));
customPlot->yAxis->setBasePen(QPen(Qt::white, 1));
customPlot->xAxis->setTickPen(QPen(Qt::white, 1));
customPlot->yAxis->setTickPen(QPen(Qt::white, 1));
customPlot->xAxis->setSubTickPen(QPen(Qt::white, 1));
customPlot->yAxis->setSubTickPen(QPen(Qt::white, 1));
customPlot->xAxis->setTickLabelColor(Qt::white);
customPlot->yAxis->setTickLabelColor(Qt::white);
customPlot->xAxis->setLabelColor(Qt::white);
customPlot->yAxis->setLabelColor(Qt::white);
customPlot->xAxis->grid()->setPen(QPen(QColor(140, 140, 140), 1, Qt::DotLine));
customPlot->yAxis->grid()->setPen(QPen(QColor(140, 140, 140), 1, Qt::DotLine));
customPlot->xAxis->grid()->setSubGridPen(QPen(QColor(80, 80, 80), 1, Qt::DotLine));
customPlot->yAxis->grid()->setSubGridPen(QPen(QColor(80, 80, 80), 1, Qt::DotLine));
customPlot->xAxis->grid()->setZeroLinePen(Qt::NoPen);
customPlot->yAxis->grid()->setZeroLinePen(Qt::NoPen);
r_graph = customPlot->addGraph();
r_graph->setBrush(QBrush(QColor(170, 40, 80)));
r_graph->setPen(QPen(Qt::red));
//r_graph->setLineStyle(QCPGraph::lsImpulse);
connect(ui->applyB, SIGNAL(clicked()), this, SLOT(applyScale()));
connect(customPlot, SIGNAL(mouseMove(QMouseEvent*)), this, SLOT(updateValues(QMouseEvent*)));
connect(ui->minEdit, SIGNAL(valueChanged(double)), this, SLOT(updateLimits(double)));
connect(ui->maxEdit, SIGNAL(valueChanged(double)), this, SLOT(updateLimits(double)));
connect(customPlot->xAxis, SIGNAL(rangeChanged(QCPRange)), this, SLOT(checkRangeLimit(QCPRange)));
constructHistogram();
}
FITSHistogram::FITSHistogram(QWidget *parent) : QDialog(parent)
{
ui = new histogramUI(this);
tab = (FITSTab *) parent;
type = FITS_AUTO;
napply = 0;
connect(ui->applyB, SIGNAL(clicked()), this, SLOT(applyScale()));
connect(ui->minOUT, SIGNAL(editingFinished()), this, SLOT(updateLowerLimit()));
connect(ui->maxOUT, SIGNAL(editingFinished()), this, SLOT(updateUpperLimit()));
connect(ui->minSlider, SIGNAL(valueChanged(int)), this, SLOT(minSliderUpdated(int)));
connect(ui->maxSlider, SIGNAL(valueChanged(int)), this, SLOT(maxSliderUpdated(int)));
ui->histFrame->init();
constructHistogram(ui->histFrame->getHistWidth(), ui->histFrame->getHistHeight());
}
void BiquadBase::setPoleZeroForm (const BiquadPoleState& bps)
{
setPoleZeroPair (bps);
applyScale (bps.gain);
}
/**
* align actions
*/
void alignAction(int action) {
vector actionVector;
switch(action) {
case 'a': /* turn animation on or off */
if(TRUE == (animate = !animate)) {
glutTimerFunc(framePeriod, alignTimerEvent, 0);
}
else {
displayImg = 1;
}
redisplay();
break;
case 'c': /* set the rotation center */
settingRotCenter = TRUE;
break;
case 'y': /* speed up the flickering */
switchPeriod -= switchPerIncrement;
if(switchPeriod < 0) switchPeriod = 0;
break;
case 't': /* slow down the flickering */
switchPeriod += switchPerIncrement;
if(switchPeriod > MAX_SWITCH_PERIOD) switchPeriod = MAX_SWITCH_PERIOD;
break;
case 'e': /* toggle previous slice tack display */
showPrevTacks = !showPrevTacks;
redisplay();
break;
case 'w': /* toggle curent slice tack display */
showCurTacks = !showCurTacks;
redisplay();
break;
case 'Q':
displayImg = !displayImg;
redisplay();
break;
case 'p': /* print the action list */
case 'P':
fprintf(stdout,"---------------------------------------\n");
dumpActionList(actions);
fprintf(stdout,"---------------------------------------\n");
break;
/* case 'r': /\* reset the position of the reference image to unmoved *\/ */
/* resetImage(); */
/* break; */
/* case 'u': /\* undo the last action *\/ */
/* case 'U': */
/* undoLastAction(); */
/* break; */
/* fine direction stuff using numeric keypad */
case '1': /* down and left */
actionVector.x = -transIncrX;
actionVector.y = -transIncrY;
applyTranslation(actionVector);
break;
case '2': /* down */
actionVector.x = 0;
actionVector.y = -transIncrY;
applyTranslation(actionVector);
break;
case '3': /* down and right */
actionVector.x = transIncrX;
actionVector.y = -transIncrY;
applyTranslation(actionVector);
break;
case '4': /* left */
actionVector.x = -transIncrX;
actionVector.y = 0;
applyTranslation(actionVector);
break;
case '6': /* right */
actionVector.x = transIncrX;
actionVector.y = 0;
applyTranslation(actionVector);
break;
case '7': /* up and left */
actionVector.x = -transIncrX;
actionVector.y = transIncrY;
applyTranslation(actionVector);
break;
case '8': /* up */
actionVector.x = 0;
actionVector.y = transIncrY;
applyTranslation(actionVector);
break;
case '9': /* up and right */
actionVector.x = transIncrX;
actionVector.y = transIncrY;
applyTranslation(actionVector);
break;
case '=': /* grow the slice */
case '+':
actionVector.x = scaleIncrX;
actionVector.y = scaleIncrY;
applyScale(actionVector);
break;
case '-': /* shrink the slice */
case '_':
actionVector.x = -scaleIncrX;
actionVector.y = -scaleIncrY;
applyScale(actionVector);
break;
default:
break;
}
}
void Transformation::applyTransformation(SDL_Point &p) {
applyTranslation(p);
applyScale(p);
}
