static void __init dir_615c1_setup(void)
{
ar71xx_add_device_mdio(0x0);
ar71xx_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RMII;
ar71xx_eth0_data.phy_mask = 0xf;
ar71xx_eth0_data.speed = SPEED_100;
ar71xx_eth0_data.duplex = DUPLEX_FULL;
ar71xx_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_RMII;
ar71xx_eth1_data.phy_mask = 0x10;
ar71xx_add_device_eth(0);
ar71xx_add_device_eth(1);
ar71xx_add_device_m25p80(&dir_615c1_flash_data);
ar71xx_add_device_leds_gpio(-1, ARRAY_SIZE(dir_615c1_leds_gpio),
dir_615c1_leds_gpio);
ar71xx_add_device_gpio_buttons(-1, DIR_615C1_BUTTONS_POLL_INTERVAL,
ARRAY_SIZE(dir_615c1_gpio_buttons),
dir_615c1_gpio_buttons);
ar913x_add_device_wmac();
}
static void __init mzk_w300nh_setup(void)
{
u8 *mac = (u8 *) KSEG1ADDR(0x1fff1000);
ar71xx_set_mac_base(mac);
ar71xx_add_device_mdio(0x0);
ar71xx_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RMII;
ar71xx_eth0_data.phy_mask = 0xf;
ar71xx_eth0_data.speed = SPEED_100;
ar71xx_eth0_data.duplex = DUPLEX_FULL;
ar71xx_eth0_data.has_ar8216 = 1;
ar71xx_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_RMII;
ar71xx_eth1_data.phy_mask = 0x10;
ar71xx_add_device_eth(0);
ar71xx_add_device_eth(1);
ar71xx_add_device_spi(NULL, mzk_w300nh_spi_info,
ARRAY_SIZE(mzk_w300nh_spi_info));
ar71xx_add_device_leds_gpio(-1, ARRAY_SIZE(mzk_w300nh_leds_gpio),
mzk_w300nh_leds_gpio);
ar71xx_add_device_gpio_buttons(-1, MZK_W04NU_BUTTONS_POLL_INTERVAL,
ARRAY_SIZE(mzk_w300nh_gpio_buttons),
mzk_w300nh_gpio_buttons);
ar91xx_add_device_wmac();
}
static void __init ubnt_m_setup(void)
{
u8 *mac1 = (u8 *) KSEG1ADDR(0x1fff0000);
u8 *mac2 = (u8 *) KSEG1ADDR(0x1fff0000 + ETH_ALEN);
u8 *ee = (u8 *) KSEG1ADDR(0x1fff1000);
ar71xx_add_device_m25p80(NULL);
ar71xx_add_device_mdio(~0);
ar71xx_init_mac(ar71xx_eth0_data.mac_addr, mac1, 0);
ar71xx_init_mac(ar71xx_eth1_data.mac_addr, mac2, 0);
ar71xx_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_MII;
ar71xx_eth0_data.speed = SPEED_100;
ar71xx_eth0_data.duplex = DUPLEX_FULL;
ar71xx_eth0_data.fifo_cfg1 = 0x0010ffff;
ar71xx_eth0_data.fifo_cfg2 = 0x015500aa;
ar71xx_eth0_data.fifo_cfg3 = 0x01f00140;
ar71xx_add_device_eth(0);
ap91_pci_init(ee, NULL);
ar71xx_add_device_leds_gpio(-1, ARRAY_SIZE(ubnt_m_leds_gpio),
ubnt_m_leds_gpio);
ar71xx_add_device_gpio_buttons(-1, UBNT_BUTTONS_POLL_INTERVAL,
ARRAY_SIZE(ubnt_m_gpio_buttons),
ubnt_m_gpio_buttons);
}
static void __init tl_wa901nd_setup(void)
{
u8 *mac = (u8 *) KSEG1ADDR(0x1f01fc00);
u8 *ee = (u8 *) KSEG1ADDR(0x1fff1000);
/*
* ar71xx_eth0 would be the WAN port, but is not connected on
* the TL-WA901ND. ar71xx_eth1 connects to the internal switch chip,
* however we have a single LAN port only.
*/
ar71xx_init_mac(ar71xx_eth1_data.mac_addr, mac, 0);
ar71xx_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_RMII;
ar71xx_eth1_data.speed = SPEED_1000;
ar71xx_eth1_data.duplex = DUPLEX_FULL;
ar71xx_eth1_data.has_ar7240_switch = 1;
ar71xx_add_device_mdio(0x0);
ar71xx_add_device_eth(1);
ar71xx_add_device_m25p80(&tl_wa901nd_flash_data);
ar71xx_add_device_leds_gpio(-1, ARRAY_SIZE(tl_wa901nd_leds_gpio),
tl_wa901nd_leds_gpio);
ar71xx_add_device_gpio_buttons(-1, TL_WA901ND_BUTTONS_POLL_INTERVAL,
ARRAY_SIZE(tl_wa901nd_gpio_buttons),
tl_wa901nd_gpio_buttons);
ap91_pci_init(ee, mac);
}
static void __init tl_wr941nd_setup(void)
{
u8 *mac = (u8 *) KSEG1ADDR(0x1f01fc00);
ar71xx_set_mac_base(mac);
ar71xx_add_device_mdio(0x0);
ar71xx_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RMII;
ar71xx_eth0_data.phy_mask = 0x0;
ar71xx_eth0_data.speed = SPEED_100;
ar71xx_eth0_data.duplex = DUPLEX_FULL;
ar71xx_add_device_eth(0);
ar71xx_add_device_dsa(0, &tl_wr941nd_dsa_data);
ar71xx_add_device_spi(NULL, tl_wr941nd_spi_info,
ARRAY_SIZE(tl_wr941nd_spi_info));
ar71xx_add_device_leds_gpio(-1, ARRAY_SIZE(tl_wr941nd_leds_gpio),
tl_wr941nd_leds_gpio);
ar71xx_add_device_gpio_buttons(-1, TL_WR941ND_BUTTONS_POLL_INTERVAL,
ARRAY_SIZE(tl_wr941nd_gpio_buttons),
tl_wr941nd_gpio_buttons);
ar91xx_add_device_wmac();
}
static void __init wzrhpg300nh_setup(void)
{
u8 *eeprom = (u8 *) KSEG1ADDR(0x1fff1000);
ar71xx_set_mac_base(eeprom + WZRHPG300NH_MAC_OFFSET);
ar71xx_eth0_pll_data.pll_1000 = 0x1e000100;
ar71xx_eth0_data.mii_bus_dev = &wzrhpg300nh_rtl8366s_device.dev;
ar71xx_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII;
ar71xx_eth0_data.speed = SPEED_1000;
ar71xx_eth0_data.duplex = DUPLEX_FULL;
ar71xx_eth1_pll_data.pll_1000 = 0x1e000100;
ar71xx_eth1_data.mii_bus_dev = &wzrhpg300nh_rtl8366s_device.dev;
ar71xx_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII;
ar71xx_eth1_data.phy_mask = 0x10;
ar71xx_add_device_eth(0);
ar71xx_add_device_eth(1);
ar71xx_add_device_usb();
ar913x_add_device_wmac(eeprom, NULL);
platform_device_register(&wzrhpg300nh_74hc153_device);
platform_device_register(&wzrhpg300nh_flash_device);
platform_device_register(&wzrhpg300nh_rtl8366s_device);
ar71xx_add_device_leds_gpio(-1, ARRAY_SIZE(wzrhpg300nh_leds_gpio),
wzrhpg300nh_leds_gpio);
ar71xx_add_device_gpio_buttons(-1, WZRHPG300NH_BUTTONS_POLL_INTERVAL,
ARRAY_SIZE(wzrhpg300nh_gpio_buttons),
wzrhpg300nh_gpio_buttons);
}
static void __init tew_632brp_setup(void)
{
ar71xx_add_device_mdio(0x0);
ar71xx_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RMII;
ar71xx_eth0_data.phy_mask = 0xf;
ar71xx_eth0_data.speed = SPEED_100;
ar71xx_eth0_data.duplex = DUPLEX_FULL;
ar71xx_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_RMII;
ar71xx_eth1_data.phy_mask = 0x10;
ar71xx_add_device_eth(0);
ar71xx_add_device_eth(1);
ar71xx_add_device_spi(NULL, tew_632brp_spi_info,
ARRAY_SIZE(tew_632brp_spi_info));
ar71xx_add_device_leds_gpio(-1, ARRAY_SIZE(tew_632brp_leds_gpio),
tew_632brp_leds_gpio);
ar71xx_add_device_gpio_buttons(-1, TEW_632BRP_BUTTONS_POLL_INTERVAL,
ARRAY_SIZE(tew_632brp_gpio_buttons),
tew_632brp_gpio_buttons);
ar91xx_add_device_wmac();
}
static void __init mzk_w04nu_setup(void)
{
u8 *eeprom = (u8 *) KSEG1ADDR(0x1fff1000);
ar71xx_set_mac_base(eeprom);
ar71xx_add_device_mdio(0x0);
ar71xx_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RMII;
ar71xx_eth0_data.speed = SPEED_100;
ar71xx_eth0_data.duplex = DUPLEX_FULL;
ar71xx_eth0_data.has_ar8216 = 1;
ar71xx_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_RMII;
ar71xx_eth1_data.phy_mask = 0x10;
ar71xx_add_device_eth(0);
ar71xx_add_device_eth(1);
ar71xx_add_device_m25p80(&mzk_w04nu_flash_data);
ar71xx_add_device_leds_gpio(-1, ARRAY_SIZE(mzk_w04nu_leds_gpio),
mzk_w04nu_leds_gpio);
ar71xx_add_device_gpio_buttons(-1, MZK_W04NU_BUTTONS_POLL_INTERVAL,
ARRAY_SIZE(mzk_w04nu_gpio_buttons),
mzk_w04nu_gpio_buttons);
ar71xx_add_device_usb();
ar913x_add_device_wmac(eeprom, NULL);
}
static void __init rb493_setup(void)
{
rb4xx_add_device_spi();
ar71xx_add_device_mdio(0x3fffff00);
ar71xx_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_MII;
ar71xx_eth0_data.phy_mask = 0;
ar71xx_eth0_data.speed = SPEED_100;
ar71xx_eth0_data.duplex = DUPLEX_FULL;
ar71xx_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_RMII;
ar71xx_eth1_data.phy_mask = 0x00000001;
ar71xx_add_device_eth(0);
ar71xx_add_device_eth(1);
ar71xx_add_device_leds_gpio(-1, ARRAY_SIZE(rb4xx_leds_gpio),
rb4xx_leds_gpio);
ar71xx_add_device_gpio_buttons(-1, RB4XX_BUTTONS_POLL_INTERVAL,
ARRAY_SIZE(rb4xx_gpio_buttons),
rb4xx_gpio_buttons);
platform_device_register(&rb4xx_nand_device);
ar71xx_pci_init(ARRAY_SIZE(rb4xx_pci_irqs), rb4xx_pci_irqs);
}
static void __init wrt400n_setup(void)
{
u8 *art = (u8 *) KSEG1ADDR(0x1fff0000);
u8 *mac = art + WRT400N_MAC_ADDR_OFFSET;
ar71xx_add_device_mdio(0x0);
ar71xx_init_mac(ar71xx_eth0_data.mac_addr, mac, 1);
ar71xx_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RMII;
ar71xx_eth0_data.speed = SPEED_100;
ar71xx_eth0_data.duplex = DUPLEX_FULL;
ar71xx_init_mac(ar71xx_eth1_data.mac_addr, mac, 2);
ar71xx_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_RMII;
ar71xx_eth1_data.phy_mask = 0x10;
ar71xx_add_device_eth(0);
ar71xx_add_device_eth(1);
ar71xx_add_device_m25p80(&wrt400n_flash_data);
ar71xx_add_device_leds_gpio(-1, ARRAY_SIZE(wrt400n_leds_gpio),
wrt400n_leds_gpio);
ar71xx_add_device_gpio_buttons(-1, WRT400N_BUTTONS_POLL_INTERVAL,
ARRAY_SIZE(wrt400n_gpio_buttons),
wrt400n_gpio_buttons);
ap94_pci_init(art + WRT400N_CALDATA0_OFFSET, NULL,
art + WRT400N_CALDATA1_OFFSET, NULL);
}
static void __init pb44_init(void)
{
ar71xx_add_device_mdio(~PB44_MDIO_PHYMASK);
ar71xx_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII;
ar71xx_eth0_data.phy_mask = PB44_WAN_PHYMASK;
ar71xx_add_device_eth(0);
ar71xx_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII;
ar71xx_eth1_data.phy_mask = PB44_LAN_PHYMASK;
ar71xx_eth1_data.speed = SPEED_1000;
ar71xx_eth1_data.duplex = DUPLEX_FULL;
ar71xx_eth1_pll_data.pll_1000 = 0x110000;
ar71xx_add_device_eth(1);
ar71xx_add_device_usb();
ar71xx_pci_init(ARRAY_SIZE(pb44_pci_irqs), pb44_pci_irqs);
i2c_register_board_info(0, pb44_i2c_board_info,
ARRAY_SIZE(pb44_i2c_board_info));
platform_device_register(&pb44_i2c_gpio_device);
spi_register_board_info(pb44_spi_info, ARRAY_SIZE(pb44_spi_info));
platform_device_register(&pb44_spi_device);
ar71xx_add_device_leds_gpio(-1, ARRAY_SIZE(pb44_leds_gpio),
pb44_leds_gpio);
ar71xx_add_device_gpio_buttons(-1, 20, ARRAY_SIZE(pb44_gpio_buttons),
pb44_gpio_buttons);
}
static void __init ubnt_generic_setup(void)
{
ar71xx_add_device_m25p80(NULL);
ar71xx_add_device_gpio_buttons(-1, UBNT_BUTTONS_POLL_INTERVAL,
ARRAY_SIZE(ubnt_gpio_buttons),
ubnt_gpio_buttons);
pb42_pci_init();
}
static void __init rb4xx_generic_setup(void)
{
ar71xx_gpio_function_enable(GPIO_FUNC_SPI_CS1_EN |
GPIO_FUNC_SPI_CS2_EN);
ar71xx_add_device_leds_gpio(-1, ARRAY_SIZE(rb4xx_leds_gpio),
rb4xx_leds_gpio);
ar71xx_add_device_gpio_buttons(-1, RB4XX_BUTTONS_POLL_INTERVAL,
ARRAY_SIZE(rb4xx_gpio_buttons),
rb4xx_gpio_buttons);
platform_device_register(&rb4xx_nand_device);
}
static void __init dir825b1_setup(void)
{
u8 mac[6], i;
memcpy(mac, (u8*)KSEG1ADDR(DIR825B1_MAC_LOCATION_1), 6);
for(i = 5; i >= 3; i--)
if(++mac[i] != 0x00) break;
ar71xx_set_mac_base(mac);
ar71xx_add_device_mdio(0x0);
ar71xx_eth0_data.mii_bus_dev = &dir825b1_rtl8366s_device.dev;
ar71xx_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII;
ar71xx_eth0_data.speed = SPEED_1000;
ar71xx_eth0_data.duplex = DUPLEX_FULL;
ar71xx_eth0_pll_data.pll_1000 = 0x11110000;
ar71xx_eth1_data.mii_bus_dev = &dir825b1_rtl8366s_device.dev;
ar71xx_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII;
ar71xx_eth1_data.phy_mask = 0x10;
ar71xx_eth1_pll_data.pll_1000 = 0x11110000;
ar71xx_add_device_eth(0);
ar71xx_add_device_eth(1);
ar71xx_add_device_m25p80(&dir825b1_flash_data);
ar71xx_add_device_leds_gpio(-1, ARRAY_SIZE(dir825b1_leds_gpio),
dir825b1_leds_gpio);
ar71xx_add_device_gpio_buttons(-1, DIR825B1_BUTTONS_POLL_INTERVAL,
ARRAY_SIZE(dir825b1_gpio_buttons),
dir825b1_gpio_buttons);
ar71xx_add_device_usb();
platform_device_register(&dir825b1_rtl8366s_device);
ap94_pci_setup_wmac_led_pin(0, 5);
ap94_pci_setup_wmac_led_pin(1, 5);
ap94_pci_init((u8 *) KSEG1ADDR(DIR825B1_CAL_LOCATION_0),
(u8 *) KSEG1ADDR(DIR825B1_MAC_LOCATION_0),
(u8 *) KSEG1ADDR(DIR825B1_CAL_LOCATION_1),
(u8 *) KSEG1ADDR(DIR825B1_MAC_LOCATION_1));
}
static void __init wrt160nl_setup(void)
{
const char *nvram = (char *) KSEG1ADDR(WRT160NL_NVRAM_ADDR);
u8 *eeprom = (u8 *) KSEG1ADDR(0x1fff1000);
u8 mac[6];
if (nvram_parse_mac_addr(nvram, WRT160NL_NVRAM_SIZE,
"lan_hwaddr=", mac) == 0) {
ar71xx_init_mac(ar71xx_eth0_data.mac_addr, mac, 0);
ar71xx_init_mac(ar71xx_eth1_data.mac_addr, mac, 1);
}
ar71xx_add_device_mdio(0x0);
ar71xx_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RMII;
ar71xx_eth0_data.phy_mask = 0x01;
ar71xx_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_RMII;
ar71xx_eth1_data.phy_mask = 0x10;
ar71xx_add_device_eth(0);
ar71xx_add_device_eth(1);
ar71xx_add_device_m25p80(&wrt160nl_flash_data);
ar71xx_add_device_usb();
if (nvram_parse_mac_addr(nvram, WRT160NL_NVRAM_SIZE,
"wl0_hwaddr=", mac) == 0)
ar913x_add_device_wmac(eeprom, mac);
else
ar913x_add_device_wmac(eeprom, NULL);
ar71xx_add_device_leds_gpio(-1, ARRAY_SIZE(wrt160nl_leds_gpio),
wrt160nl_leds_gpio);
ar71xx_add_device_gpio_buttons(-1, WRT160NL_BUTTONS_POLL_INTERVAL,
ARRAY_SIZE(wrt160nl_gpio_buttons),
wrt160nl_gpio_buttons);
}
static void __init aw_nr580_setup(void)
{
ar71xx_add_device_mdio(0x0);
ar71xx_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_MII;
ar71xx_eth0_data.speed = SPEED_100;
ar71xx_eth0_data.duplex = DUPLEX_FULL;
ar71xx_add_device_eth(0);
pb42_pci_init();
ar71xx_add_device_m25p80(NULL);
ar71xx_add_device_leds_gpio(-1, ARRAY_SIZE(aw_nr580_leds_gpio),
aw_nr580_leds_gpio);
ar71xx_add_device_gpio_buttons(-1, AW_NR580_BUTTONS_POLL_INTERVAL,
ARRAY_SIZE(aw_nr580_gpio_buttons),
aw_nr580_gpio_buttons);
}
static void __init wp543_setup(void)
{
ar71xx_add_device_spi(NULL, wp543_spi_info, ARRAY_SIZE(wp543_spi_info));
ar71xx_add_device_mdio(0xfffffff7);
ar71xx_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_MII;
ar71xx_eth0_data.phy_mask = 0x00000008;
ar71xx_add_device_eth(0);
ar71xx_add_device_usb();
ar71xx_pci_init(ARRAY_SIZE(wp543_pci_irqs), wp543_pci_irqs);
ar71xx_add_device_leds_gpio(-1, ARRAY_SIZE(wp543_leds_gpio),
wp543_leds_gpio);
ar71xx_add_device_gpio_buttons(-1, WP543_BUTTONS_POLL_INTERVAL,
ARRAY_SIZE(wp543_gpio_buttons),
wp543_gpio_buttons);
}
static void __init dir_600_a1_setup(void)
{
const char *nvram = (char *) KSEG1ADDR(DIR_600_A1_NVRAM_ADDR);
u8 *ee = (u8 *) KSEG1ADDR(0x1fff1000);
u8 mac_buff[6];
u8 *mac = NULL;
if (nvram_parse_mac_addr(nvram, DIR_600_A1_NVRAM_SIZE,
"lan_mac=", mac_buff) == 0)
mac = mac_buff;
ar71xx_add_device_m25p80(&dir_600_a1_flash_data);
ar71xx_add_device_leds_gpio(-1, ARRAY_SIZE(dir_600_a1_leds_gpio),
dir_600_a1_leds_gpio);
ar71xx_add_device_gpio_buttons(-1, DIR_600_A1_BUTTONS_POLL_INTERVAL,
ARRAY_SIZE(dir_600_a1_gpio_buttons),
dir_600_a1_gpio_buttons);
ar71xx_eth1_data.has_ar7240_switch = 1;
ar71xx_set_mac_base(mac);
/* WAN port */
ar71xx_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RMII;
ar71xx_eth0_data.speed = SPEED_100;
ar71xx_eth0_data.duplex = DUPLEX_FULL;
ar71xx_eth0_data.phy_mask = BIT(4);
/* LAN ports */
ar71xx_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_RMII;
ar71xx_eth1_data.speed = SPEED_1000;
ar71xx_eth1_data.duplex = DUPLEX_FULL;
ar71xx_add_device_mdio(0x0);
ar71xx_add_device_eth(1);
ar71xx_add_device_eth(0);
ap91_pci_init(ee, mac);
}
static void __init pb42_init(void)
{
ar71xx_add_device_m25p80(NULL);
ar71xx_add_device_mdio(~PB42_MDIO_PHYMASK);
ar71xx_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_MII;
ar71xx_eth0_data.phy_mask = PB42_WAN_PHYMASK;
ar71xx_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_RMII;
ar71xx_eth1_data.speed = SPEED_100;
ar71xx_eth1_data.duplex = DUPLEX_FULL;
ar71xx_add_device_eth(0);
ar71xx_add_device_eth(1);
ar71xx_add_device_gpio_buttons(-1, PB42_BUTTONS_POLL_INTERVAL,
ARRAY_SIZE(pb42_gpio_buttons),
pb42_gpio_buttons);
pb42_pci_init();
}
static void __init rb411_setup(void)
{
rb4xx_add_device_spi();
ar71xx_add_device_mdio(0xfffffffe);
ar71xx_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_MII;
ar71xx_eth0_data.phy_mask = 0x00000001;
ar71xx_add_device_eth(0);
ar71xx_add_device_leds_gpio(-1, ARRAY_SIZE(rb4xx_leds_gpio),
rb4xx_leds_gpio);
ar71xx_add_device_gpio_buttons(-1, RB4XX_BUTTONS_POLL_INTERVAL,
ARRAY_SIZE(rb4xx_gpio_buttons),
rb4xx_gpio_buttons);
platform_device_register(&rb4xx_nand_device);
ar71xx_pci_init(ARRAY_SIZE(rb4xx_pci_irqs), rb4xx_pci_irqs);
}
static void __init wp543_setup(void)
{
ar71xx_add_device_m25p80(NULL);
ar71xx_add_device_mdio(0xfffffff0);
ar71xx_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_MII;
ar71xx_eth0_data.phy_mask = 0x0f;
ar71xx_eth0_data.reset_bit = RESET_MODULE_GE0_MAC |
RESET_MODULE_GE0_PHY;
ar71xx_add_device_eth(0);
ar71xx_add_device_usb();
pb42_pci_init();
ar71xx_add_device_leds_gpio(-1, ARRAY_SIZE(wp543_leds_gpio),
wp543_leds_gpio);
ar71xx_add_device_gpio_buttons(-1, WP543_BUTTONS_POLL_INTERVAL,
ARRAY_SIZE(wp543_gpio_buttons),
wp543_gpio_buttons);
}
static void __init wrt400n_setup(void)
{
u8 *art = (u8 *) KSEG1ADDR(0x1fff0000);
u8 mac[6];
int i;
memcpy(mac, art + WRT400N_MAC_ADDR_OFFSET, 6);
for (i = 5; i >= 3; i--)
if (++mac[i] != 0x00) break;
ar71xx_set_mac_base(mac);
ar71xx_add_device_mdio(0x0);
ar71xx_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RMII;
ar71xx_eth0_data.speed = SPEED_100;
ar71xx_eth0_data.duplex = DUPLEX_FULL;
ar71xx_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_RMII;
ar71xx_eth1_data.phy_mask = 0x10;
ar71xx_add_device_eth(0);
ar71xx_add_device_eth(1);
ar71xx_add_device_m25p80(&wrt400n_flash_data);
ar71xx_add_device_leds_gpio(-1, ARRAY_SIZE(wrt400n_leds_gpio),
wrt400n_leds_gpio);
ar71xx_add_device_gpio_buttons(-1, WRT400N_BUTTONS_POLL_INTERVAL,
ARRAY_SIZE(wrt400n_gpio_buttons),
wrt400n_gpio_buttons);
ap94_pci_init(art + WRT400N_CALDATA0_OFFSET, NULL,
art + WRT400N_CALDATA1_OFFSET, NULL);
}
static void __init dir_615c1_setup(void)
{
const char *config = (char *) KSEG1ADDR(DIR_615C1_CONFIG_ADDR);
u8 *eeprom = (u8 *) KSEG1ADDR(0x1fff1000);
u8 mac[6];
u8 *wlan_mac = NULL;
if (nvram_parse_mac_addr(config, DIR_615C1_CONFIG_SIZE,
"lan_mac=", mac) == 0) {
ar71xx_set_mac_base(mac);
wlan_mac = mac;
}
ar71xx_add_device_mdio(0x0);
ar71xx_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RMII;
ar71xx_eth0_data.speed = SPEED_100;
ar71xx_eth0_data.duplex = DUPLEX_FULL;
ar71xx_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_RMII;
ar71xx_eth1_data.phy_mask = 0x10;
ar71xx_add_device_eth(0);
ar71xx_add_device_eth(1);
ar71xx_add_device_m25p80(&dir_615c1_flash_data);
ar71xx_add_device_leds_gpio(-1, ARRAY_SIZE(dir_615c1_leds_gpio),
dir_615c1_leds_gpio);
ar71xx_add_device_gpio_buttons(-1, DIR_615C1_BUTTONS_POLL_INTERVAL,
ARRAY_SIZE(dir_615c1_gpio_buttons),
dir_615c1_gpio_buttons);
ar913x_add_device_wmac(eeprom, wlan_mac);
}
static void __init ap83_generic_setup(void)
{
u8 *eeprom = (u8 *) KSEG1ADDR(0x1fff1000);
ar71xx_set_mac_base(eeprom);
ar71xx_add_device_mdio(0xfffffffe);
ar71xx_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII;
ar71xx_eth0_data.phy_mask = 0x1;
ar71xx_add_device_eth(0);
ar71xx_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII;
ar71xx_eth1_data.speed = SPEED_1000;
ar71xx_eth1_data.duplex = DUPLEX_FULL;
ar71xx_eth1_pll_data.pll_1000 = 0x1f000000;
ar71xx_add_device_eth(1);
ar71xx_add_device_leds_gpio(-1, ARRAY_SIZE(ap83_leds_gpio),
ap83_leds_gpio);
ar71xx_add_device_gpio_buttons(-1, AP83_BUTTONS_POLL_INTERVAL,
ARRAY_SIZE(ap83_gpio_buttons),
ap83_gpio_buttons);
ar71xx_add_device_usb();
ar913x_add_device_wmac(eeprom, NULL);
platform_device_register(&ap83_flash_device);
spi_register_board_info(ap83_spi_info, ARRAY_SIZE(ap83_spi_info));
}
