/**
* probe_irq_on - begin an interrupt autodetect
*
* Commence probing for an interrupt. The interrupts are scanned
* and a mask of potential interrupt lines is returned.
*
*/
unsigned long probe_irq_on(void)
{
struct irq_desc *desc;
unsigned long mask = 0;
unsigned int status;
int i;
/*
* quiesce the kernel, or at least the asynchronous portion
*/
async_synchronize_full();
mutex_lock(&probing_active);
/*
* something may have generated an irq long ago and we want to
* flush such a longstanding irq before considering it as spurious.
*/
for_each_irq_desc_reverse(i, desc) {
atomic_spin_lock_irq(&desc->lock);
if (!desc->action && !(desc->status & IRQ_NOPROBE)) {
/*
* An old-style architecture might still have
* the handle_bad_irq handler there:
*/
compat_irq_chip_set_default_handler(desc);
/*
* Some chips need to know about probing in
* progress:
*/
if (desc->chip->set_type)
desc->chip->set_type(i, IRQ_TYPE_PROBE);
desc->chip->startup(i);
}
atomic_spin_unlock_irq(&desc->lock);
}
/**
* probe_irq_on - begin an interrupt autodetect
*
* Commence probing for an interrupt. The interrupts are scanned
* and a mask of potential interrupt lines is returned.
*
*/
unsigned long probe_irq_on(void)
{
struct irq_desc *desc;
unsigned long mask = 0;
int i;
/*
* quiesce the kernel, or at least the asynchronous portion
*/
async_synchronize_full();
mutex_lock(&probing_active);
/*
* something may have generated an irq long ago and we want to
* flush such a longstanding irq before considering it as spurious.
*/
for_each_irq_desc_reverse(i, desc) {
raw_spin_lock_irq(&desc->lock);
if (!desc->action && irq_settings_can_probe(desc)) {
/*
* Some chips need to know about probing in
* progress:
*/
if (desc->irq_data.chip->irq_set_type)
desc->irq_data.chip->irq_set_type(&desc->irq_data,
IRQ_TYPE_PROBE);
irq_startup(desc, false);
}
raw_spin_unlock_irq(&desc->lock);
}
/*
* Prepare the namespace - decide what/where to mount, load ramdisks, etc.
*/
void __init prepare_namespace(void)
{
int is_floppy;
if (root_delay) {
printk(KERN_INFO "Waiting %dsec before mounting root device...\n",
root_delay);
ssleep(root_delay);
}
/*
* wait for the known devices to complete their probing
*
* Note: this is a potential source of long boot delays.
* For example, it is not atypical to wait 5 seconds here
* for the touchpad of a laptop to initialize.
*/
wait_for_device_probe();
md_run_setup();
if (saved_root_name[0]) {
root_device_name = saved_root_name;
printk(KERN_DEBUG "root_device_name: %s\n",root_device_name);
if (!strncmp(root_device_name, "mtd", 3) ||
!strncmp(root_device_name, "ubi", 3)) {
mount_block_root(root_device_name, root_mountflags);
goto out;
}
ROOT_DEV = name_to_dev_t(root_device_name);
if (strncmp(root_device_name, "/dev/", 5) == 0)
root_device_name += 5;
}
if (initrd_load())
goto out;
/* wait for any asynchronous scanning to complete */
if ((ROOT_DEV == 0) && root_wait) {
printk(KERN_INFO "Waiting for root device %s...\n",
saved_root_name);
while (driver_probe_done() != 0 ||
(ROOT_DEV = name_to_dev_t(saved_root_name)) == 0)
msleep(100);
async_synchronize_full();
}
is_floppy = MAJOR(ROOT_DEV) == FLOPPY_MAJOR;
if (is_floppy && rd_doload && rd_load_disk(0))
ROOT_DEV = Root_RAM0;
mount_root();
out:
devtmpfs_mount("dev");
printk(KERN_DEBUG "after devtmpfs_mount\n");
sys_mount(".", "/", NULL, MS_MOVE, NULL);
printk(KERN_DEBUG "after sys_mount\n");
sys_chroot((const char __user __force *)".");
}
/**
* wait_for_device_probe
* Wait for device probing to be completed.
*
* Note: this function polls at 100 msec intervals.
*/
int wait_for_device_probe(void)
{
/* wait for the known devices to complete their probing */
while (driver_probe_done() != 0)
msleep(100);
async_synchronize_full();
return 0;
}
static int scsi_bus_prepare(struct device *dev)
{
if (scsi_is_sdev_device(dev)) {
/* sd probing uses async_schedule. Wait until it finishes. */
async_synchronize_full();
} else if (scsi_is_host_device(dev)) {
/* Wait until async scanning is finished */
scsi_complete_async_scans();
}
return 0;
}
static int scsi_bus_prepare(struct device *dev)
{
if (scsi_is_sdev_device(dev)) {
async_synchronize_full();
} else if (scsi_is_host_device(dev)) {
scsi_complete_async_scans();
}
return 0;
}
/* This is a non __init function. Force it to be noinline otherwise gcc
* makes it inline to init() and it becomes part of init.text section
*/
static noinline int init_post(void)
{
/* need to finish all async __init code before freeing the memory */
async_synchronize_full();
free_initmem();
unlock_kernel();
mark_rodata_ro();
system_state = SYSTEM_RUNNING;
numa_default_policy();
printk(KERN_INFO"Running BFS CPU scheduler v0.302 by Con Kolivas.\n");
if (sys_open((const char __user *) "/dev/console", O_RDWR, 0) < 0)
printk(KERN_WARNING "Warning: unable to open an initial console.\n");
(void) sys_dup(0);
(void) sys_dup(0);
current->signal->flags |= SIGNAL_UNKILLABLE;
if (ramdisk_execute_command) {
run_init_process(ramdisk_execute_command);
printk(KERN_WARNING "Failed to execute %s\n",
ramdisk_execute_command);
}
/*
* We try each of these until one succeeds.
*
* The Bourne shell can be used instead of init if we are
* trying to recover a really broken machine.
*/
if (execute_command) {
run_init_process(execute_command);
printk(KERN_WARNING "Failed to execute %s. Attempting "
"defaults...\n", execute_command);
}
run_init_process("/sbin/init");
run_init_process("/etc/init");
run_init_process("/bin/init");
run_init_process("/bin/sh");
panic("No init found. Try passing init= option to kernel.");
}
/* This is a non __init function. Force it to be noinline otherwise gcc
* makes it inline to init() and it becomes part of init.text section
*/
static noinline int init_post(void)
{
/* need to finish all async __init code before freeing the memory */
async_synchronize_full();
free_initmem();
unlock_kernel();
mark_rodata_ro();
system_state = SYSTEM_RUNNING;
numa_default_policy();
print_scheduler_version();
current->signal->flags |= SIGNAL_UNKILLABLE;
if (ramdisk_execute_command) {
run_init_process(ramdisk_execute_command);
printk(KERN_WARNING "Failed to execute %s\n",
ramdisk_execute_command);
}
/*
* We try each of these until one succeeds.
*
* The Bourne shell can be used instead of init if we are
* trying to recover a really broken machine.
*/
if (execute_command) {
run_init_process(execute_command);
printk(KERN_WARNING "Failed to execute %s. Attempting "
"defaults...\n", execute_command);
}
run_init_process("/sbin/init");
run_init_process("/etc/init");
run_init_process("/bin/init");
run_init_process("/bin/sh");
panic("No init found. Try passing init= option to kernel.");
}
unsigned long probe_irq_on(void)
{
struct irq_desc *desc;
unsigned long mask = 0;
unsigned int status;
int i;
async_synchronize_full();
mutex_lock(&probing_active);
for_each_irq_desc_reverse(i, desc) {
spin_lock_irq(&desc->lock);
if (!desc->action && !(desc->status & IRQ_NOPROBE)) {
compat_irq_chip_set_default_handler(desc);
if (desc->chip->set_type)
desc->chip->set_type(i, IRQ_TYPE_PROBE);
desc->chip->startup(i);
}
spin_unlock_irq(&desc->lock);
}
/**
* software_resume - Resume from a saved hibernation image.
*
* This routine is called as a late initcall, when all devices have been
* discovered and initialized already.
*
* The image reading code is called to see if there is a hibernation image
* available for reading. If that is the case, devices are quiesced and the
* contents of memory is restored from the saved image.
*
* If this is successful, control reappears in the restored target kernel in
* hibernation_snapshot() which returns to hibernate(). Otherwise, the routine
* attempts to recover gracefully and make the kernel return to the normal mode
* of operation.
*/
static int software_resume(void)
{
int error, nr_calls = 0;
/*
* If the user said "noresume".. bail out early.
*/
if (noresume || !hibernation_available())
return 0;
/*
* name_to_dev_t() below takes a sysfs buffer mutex when sysfs
* is configured into the kernel. Since the regular hibernate
* trigger path is via sysfs which takes a buffer mutex before
* calling hibernate functions (which take pm_mutex) this can
* cause lockdep to complain about a possible ABBA deadlock
* which cannot happen since we're in the boot code here and
* sysfs can't be invoked yet. Therefore, we use a subclass
* here to avoid lockdep complaining.
*/
mutex_lock_nested(&pm_mutex, SINGLE_DEPTH_NESTING);
if (swsusp_resume_device)
goto Check_image;
if (!strlen(resume_file)) {
error = -ENOENT;
goto Unlock;
}
pr_debug("Checking hibernation image partition %s\n", resume_file);
if (resume_delay) {
pr_info("Waiting %dsec before reading resume device ...\n",
resume_delay);
ssleep(resume_delay);
}
/* Check if the device is there */
swsusp_resume_device = name_to_dev_t(resume_file);
/*
* name_to_dev_t is ineffective to verify parition if resume_file is in
* integer format. (e.g. major:minor)
*/
if (isdigit(resume_file[0]) && resume_wait) {
int partno;
while (!get_gendisk(swsusp_resume_device, &partno))
msleep(10);
}
if (!swsusp_resume_device) {
/*
* Some device discovery might still be in progress; we need
* to wait for this to finish.
*/
wait_for_device_probe();
if (resume_wait) {
while ((swsusp_resume_device = name_to_dev_t(resume_file)) == 0)
msleep(10);
async_synchronize_full();
}
swsusp_resume_device = name_to_dev_t(resume_file);
if (!swsusp_resume_device) {
error = -ENODEV;
goto Unlock;
}
}
Check_image:
pr_debug("Hibernation image partition %d:%d present\n",
MAJOR(swsusp_resume_device), MINOR(swsusp_resume_device));
pr_debug("Looking for hibernation image.\n");
error = swsusp_check();
if (error)
goto Unlock;
/* The snapshot device should not be opened while we're running */
if (!atomic_add_unless(&snapshot_device_available, -1, 0)) {
error = -EBUSY;
swsusp_close(FMODE_READ);
goto Unlock;
}
pm_prepare_console();
error = __pm_notifier_call_chain(PM_RESTORE_PREPARE, -1, &nr_calls);
if (error) {
nr_calls--;
goto Close_Finish;
}
pr_debug("Preparing processes for restore.\n");
error = freeze_processes();
if (error)
goto Close_Finish;
error = load_image_and_restore();
thaw_processes();
Finish:
__pm_notifier_call_chain(PM_POST_RESTORE, nr_calls, NULL);
pm_restore_console();
atomic_inc(&snapshot_device_available);
/* For success case, the suspend path will release the lock */
Unlock:
mutex_unlock(&pm_mutex);
pr_debug("Hibernation image not present or could not be loaded.\n");
return error;
Close_Finish:
swsusp_close(FMODE_READ);
goto Finish;
}
/**
* wait_for_device_probe
* Wait for device probing to be completed.
*/
void wait_for_device_probe(void)
{
/* wait for the known devices to complete their probing */
wait_event(probe_waitqueue, atomic_read(&probe_count) == 0);
async_synchronize_full();
}
static int __init mount_nfs_root(void)
{
char *root_dev, *root_data;
unsigned int timeout;
int try, err;
err = nfs_root_data(&root_dev, &root_data);
if (err != 0)
return 0;
/*
* The server or network may not be ready, so try several
* times. Stop after a few tries in case the client wants
* to fall back to other boot methods.
*/
timeout = NFSROOT_TIMEOUT_MIN;
for (try = 1; ; try++) {
err = do_mount_root(root_dev, "nfs",
root_mountflags, root_data);
if (err == 0)
return 1;
if (try > NFSROOT_RETRY_MAX)
break;
/* Wait, in case the server refused us immediately */
ssleep(timeout);
timeout <<= 1;
if (timeout > NFSROOT_TIMEOUT_MAX)
timeout = NFSROOT_TIMEOUT_MAX;
}
return 0;
}
#endif
#if defined(CONFIG_BLK_DEV_RAM) || defined(CONFIG_BLK_DEV_FD)
void __init change_floppy(char *fmt, ...)
{
struct termios termios;
char buf[80];
char c;
int fd;
va_list args;
va_start(args, fmt);
vsprintf(buf, fmt, args);
va_end(args);
fd = sys_open("/dev/root", O_RDWR | O_NDELAY, 0);
if (fd >= 0) {
sys_ioctl(fd, FDEJECT, 0);
sys_close(fd);
}
printk(KERN_NOTICE "VFS: Insert %s and press ENTER\n", buf);
fd = sys_open("/dev/console", O_RDWR, 0);
if (fd >= 0) {
sys_ioctl(fd, TCGETS, (long)&termios);
termios.c_lflag &= ~ICANON;
sys_ioctl(fd, TCSETSF, (long)&termios);
sys_read(fd, &c, 1);
termios.c_lflag |= ICANON;
sys_ioctl(fd, TCSETSF, (long)&termios);
sys_close(fd);
}
}
#endif
void __init mount_root(void)
{
#ifdef CONFIG_ROOT_NFS
if (ROOT_DEV == Root_NFS) {
if (mount_nfs_root())
return;
printk(KERN_ERR "VFS: Unable to mount root fs via NFS, trying floppy.\n");
ROOT_DEV = Root_FD0;
}
#endif
#ifdef CONFIG_BLK_DEV_FD
if (MAJOR(ROOT_DEV) == FLOPPY_MAJOR) {
/* rd_doload is 2 for a dual initrd/ramload setup */
if (rd_doload==2) {
if (rd_load_disk(1)) {
ROOT_DEV = Root_RAM1;
root_device_name = NULL;
}
} else
change_floppy("root floppy");
}
#endif
#ifdef CONFIG_BLOCK
create_dev("/dev/root", ROOT_DEV);
mount_block_root("/dev/root", root_mountflags);
#endif
}
/*
* Prepare the namespace - decide what/where to mount, load ramdisks, etc.
*/
void __init prepare_namespace(void)
{
int is_floppy;
if (root_delay) {
printk(KERN_INFO "Waiting %dsec before mounting root device...\n",
root_delay);
ssleep(root_delay);
}
/*
* wait for the known devices to complete their probing
*
* Note: this is a potential source of long boot delays.
* For example, it is not atypical to wait 5 seconds here
* for the touchpad of a laptop to initialize.
*/
wait_for_device_probe();
md_run_setup();
if (saved_root_name[0]) {
root_device_name = saved_root_name;
if (!strncmp(root_device_name, "mtd", 3) ||
!strncmp(root_device_name, "ubi", 3)) {
mount_block_root(root_device_name, root_mountflags);
goto out;
}
ROOT_DEV = name_to_dev_t(root_device_name);
if (strncmp(root_device_name, "/dev/", 5) == 0)
root_device_name += 5;
}
if (initrd_load())
goto out;
/* wait for any asynchronous scanning to complete */
if ((ROOT_DEV == 0) && root_wait) {
printk(KERN_INFO "Waiting for root device %s...\n",
saved_root_name);
while (driver_probe_done() != 0 ||
(ROOT_DEV = name_to_dev_t(saved_root_name)) == 0)
msleep(100);
async_synchronize_full();
}
is_floppy = MAJOR(ROOT_DEV) == FLOPPY_MAJOR;
if (is_floppy && rd_doload && rd_load_disk(0))
ROOT_DEV = Root_RAM0;
mount_root();
out:
devtmpfs_mount("dev");
sys_mount(".", "/", NULL, MS_MOVE, NULL);
sys_chroot(".");
}
/**
* software_resume - Resume from a saved hibernation image.
*
* This routine is called as a late initcall, when all devices have been
* discovered and initialized already.
*
* The image reading code is called to see if there is a hibernation image
* available for reading. If that is the case, devices are quiesced and the
* contents of memory is restored from the saved image.
*
* If this is successful, control reappears in the restored target kernel in
* hibernation_snaphot() which returns to hibernate(). Otherwise, the routine
* attempts to recover gracefully and make the kernel return to the normal mode
* of operation.
*/
static int software_resume(void)
{
int error;
unsigned int flags;
/*
* If the user said "noresume".. bail out early.
*/
if (noresume)
return 0;
/*
* name_to_dev_t() below takes a sysfs buffer mutex when sysfs
* is configured into the kernel. Since the regular hibernate
* trigger path is via sysfs which takes a buffer mutex before
* calling hibernate functions (which take pm_mutex) this can
* cause lockdep to complain about a possible ABBA deadlock
* which cannot happen since we're in the boot code here and
* sysfs can't be invoked yet. Therefore, we use a subclass
* here to avoid lockdep complaining.
*/
mutex_lock_nested(&pm_mutex, SINGLE_DEPTH_NESTING);
if (swsusp_resume_device)
goto Check_image;
if (!strlen(resume_file)) {
error = -ENOENT;
goto Unlock;
}
pr_debug("PM: Checking hibernation image partition %s\n", resume_file);
if (resume_delay) {
printk(KERN_INFO "Waiting %dsec before reading resume device...\n",
resume_delay);
ssleep(resume_delay);
}
/* Check if the device is there */
swsusp_resume_device = name_to_dev_t(resume_file);
if (!swsusp_resume_device) {
/*
* Some device discovery might still be in progress; we need
* to wait for this to finish.
*/
wait_for_device_probe();
if (resume_wait) {
while ((swsusp_resume_device = name_to_dev_t(resume_file)) == 0)
msleep(10);
async_synchronize_full();
}
/*
* We can't depend on SCSI devices being available after loading
* one of their modules until scsi_complete_async_scans() is
* called and the resume device usually is a SCSI one.
*/
scsi_complete_async_scans();
swsusp_resume_device = name_to_dev_t(resume_file);
if (!swsusp_resume_device) {
error = -ENODEV;
goto Unlock;
}
}
Check_image:
pr_debug("PM: Hibernation image partition %d:%d present\n",
MAJOR(swsusp_resume_device), MINOR(swsusp_resume_device));
pr_debug("PM: Looking for hibernation image.\n");
error = swsusp_check();
if (error)
goto Unlock;
/* The snapshot device should not be opened while we're running */
if (!atomic_add_unless(&snapshot_device_available, -1, 0)) {
error = -EBUSY;
swsusp_close(FMODE_READ);
goto Unlock;
}
pm_prepare_console();
error = pm_notifier_call_chain(PM_RESTORE_PREPARE);
if (error)
goto close_finish;
error = create_basic_memory_bitmaps();
if (error)
goto close_finish;
pr_debug("PM: Preparing processes for restore.\n");
error = freeze_processes();
if (error) {
swsusp_close(FMODE_READ);
goto Done;
}
pr_debug("PM: Loading hibernation image.\n");
error = swsusp_read(&flags);
swsusp_close(FMODE_READ);
if (!error)
hibernation_restore(flags & SF_PLATFORM_MODE);
printk(KERN_ERR "PM: Failed to load hibernation image, recovering.\n");
swsusp_free();
thaw_processes();
Done:
free_basic_memory_bitmaps();
Finish:
pm_notifier_call_chain(PM_POST_RESTORE);
pm_restore_console();
atomic_inc(&snapshot_device_available);
/* For success case, the suspend path will release the lock */
Unlock:
mutex_unlock(&pm_mutex);
pr_debug("PM: Hibernation image not present or could not be loaded.\n");
return error;
close_finish:
swsusp_close(FMODE_READ);
goto Finish;
}
/*
* Prepare the namespace - decide what/where to mount, load ramdisks, etc.
*/
void __init prepare_namespace(void)
{
int is_floppy;
if (root_delay) {
printk(KERN_INFO "Waiting %dsec before mounting root device...\n",
root_delay);
ssleep(root_delay);
}
/*
* wait for the known devices to complete their probing
*
* Note: this is a potential source of long boot delays.
* For example, it is not atypical to wait 5 seconds here
* for the touchpad of a laptop to initialize.
*/
wait_for_device_probe();
md_run_setup();
if (saved_root_name[0]) {
root_device_name = saved_root_name;
if (!strncmp(root_device_name, "mtd", 3) ||
!strncmp(root_device_name, "ubi", 3)) {
mount_block_root(root_device_name, root_mountflags);
goto out;
}
#ifdef CONFIG_RTL_FLASH_DUAL_IMAGE_ENABLE
extern int is_bank2_root(); //extern from rtl_gpio.c
if(is_bank2_root()) //assume bank1 root is mtdblock1 , bank2's root is mtdblock3
strcpy(root_device_name,"/dev/mtdblock3");
#endif
ROOT_DEV = name_to_dev_t(root_device_name);
if (strncmp(root_device_name, "/dev/", 5) == 0)
root_device_name += 5;
}
if (initrd_load())
goto out;
/* wait for any asynchronous scanning to complete */
if ((ROOT_DEV == 0) && root_wait) {
printk(KERN_INFO "Waiting for root device %s...\n",
saved_root_name);
while (driver_probe_done() != 0 ||
(ROOT_DEV = name_to_dev_t(saved_root_name)) == 0)
msleep(100);
async_synchronize_full();
}
is_floppy = MAJOR(ROOT_DEV) == FLOPPY_MAJOR;
if (is_floppy && rd_doload && rd_load_disk(0))
ROOT_DEV = Root_RAM0;
mount_root();
out:
sys_mount(".", "/", NULL, MS_MOVE, NULL);
sys_chroot(".");
}
