예제 #1
0
파일: sata_via.c 프로젝트: mobilipia/iods
static int vt6420_prepare_host(struct pci_dev *pdev, struct ata_host **r_host)
{
	const struct ata_port_info *ppi[] = { &vt6420_port_info, NULL };
	struct ata_host *host;
	int rc;

	rc = ata_pci_prepare_sff_host(pdev, ppi, &host);
	if (rc)
		return rc;
	*r_host = host;

	rc = pcim_iomap_regions(pdev, 1 << 5, DRV_NAME);
	if (rc) {
		dev_printk(KERN_ERR, &pdev->dev, "failed to iomap PCI BAR 5\n");
		return rc;
	}

	host->ports[0]->ioaddr.scr_addr = svia_scr_addr(host->iomap[5], 0);
	host->ports[1]->ioaddr.scr_addr = svia_scr_addr(host->iomap[5], 1);

	return 0;
}
예제 #2
0
static int sis_init_one (struct pci_dev *pdev, const struct pci_device_id *ent)
{
	static int printed_version;
	struct ata_port_info pi = sis_port_info;
	const struct ata_port_info *ppi[] = { &pi, &pi };
	struct ata_host *host;
	u32 genctl, val;
	u8 pmr;
	u8 port2_start = 0x20;
	int rc;

	if (!printed_version++)
		dev_printk(KERN_INFO, &pdev->dev, "version " DRV_VERSION "\n");

	rc = pcim_enable_device(pdev);
	if (rc)
		return rc;

	/* check and see if the SCRs are in IO space or PCI cfg space */
	pci_read_config_dword(pdev, SIS_GENCTL, &genctl);
	if ((genctl & GENCTL_IOMAPPED_SCR) == 0)
		pi.flags |= SIS_FLAG_CFGSCR;

	/* if hardware thinks SCRs are in IO space, but there are
	 * no IO resources assigned, change to PCI cfg space.
	 */
	if ((!(pi.flags & SIS_FLAG_CFGSCR)) &&
	    ((pci_resource_start(pdev, SIS_SCR_PCI_BAR) == 0) ||
	     (pci_resource_len(pdev, SIS_SCR_PCI_BAR) < 128))) {
		genctl &= ~GENCTL_IOMAPPED_SCR;
		pci_write_config_dword(pdev, SIS_GENCTL, genctl);
		pi.flags |= SIS_FLAG_CFGSCR;
	}

	pci_read_config_byte(pdev, SIS_PMR, &pmr);
	switch (ent->device) {
	case 0x0180:
	case 0x0181:

		/* The PATA-handling is provided by pata_sis */
		switch (pmr & 0x30) {
		case 0x10:
			ppi[1] = &sis_info133_for_sata;
			break;

		case 0x30:
			ppi[0] = &sis_info133_for_sata;
			break;
		}
		if ((pmr & SIS_PMR_COMBINED) == 0) {
			dev_printk(KERN_INFO, &pdev->dev,
				   "Detected SiS 180/181/964 chipset in SATA mode\n");
			port2_start = 64;
		} else {
			dev_printk(KERN_INFO, &pdev->dev,
				   "Detected SiS 180/181 chipset in combined mode\n");
			port2_start=0;
			pi.flags |= ATA_FLAG_SLAVE_POSS;
		}
		break;

	case 0x0182:
	case 0x0183:
		pci_read_config_dword ( pdev, 0x6C, &val);
		if (val & (1L << 31)) {
			dev_printk(KERN_INFO, &pdev->dev, "Detected SiS 182/965 chipset\n");
			pi.flags |= ATA_FLAG_SLAVE_POSS;
		} else {
			dev_printk(KERN_INFO, &pdev->dev, "Detected SiS 182/965L chipset\n");
		}
		break;

	case 0x1182:
		dev_printk(KERN_INFO, &pdev->dev, "Detected SiS 1182/966/680 SATA controller\n");
		pi.flags |= ATA_FLAG_SLAVE_POSS;
		break;

	case 0x1183:
		dev_printk(KERN_INFO, &pdev->dev, "Detected SiS 1183/966/966L/968/680 controller in PATA mode\n");
		ppi[0] = &sis_info133_for_sata;
		ppi[1] = &sis_info133_for_sata;
		break;
	}

	rc = ata_pci_prepare_sff_host(pdev, ppi, &host);
	if (rc)
		return rc;

	if (!(pi.flags & SIS_FLAG_CFGSCR)) {
		void __iomem *mmio;

		rc = pcim_iomap_regions(pdev, 1 << SIS_SCR_PCI_BAR, DRV_NAME);
		if (rc)
			return rc;
		mmio = host->iomap[SIS_SCR_PCI_BAR];

		host->ports[0]->ioaddr.scr_addr = mmio;
		host->ports[1]->ioaddr.scr_addr = mmio + port2_start;
	}

	pci_set_master(pdev);
	pci_intx(pdev, 1);
	return ata_host_activate(host, pdev->irq, ata_interrupt, IRQF_SHARED,
				 &sis_sht);
}