예제 #1
0
/*ARGSUSED*/
static void
input_userauth_request(int type, u_int32_t seq, void *ctxt)
{
	Authctxt *authctxt = ctxt;
	Authmethod *m = NULL;
	char *user, *service, *method, *style = NULL;
	int authenticated = 0;

	if (authctxt == NULL)
		fatal("input_userauth_request: no authctxt");

	user = packet_get_cstring(NULL);
	service = packet_get_cstring(NULL);
	method = packet_get_cstring(NULL);
	debug("userauth-request for user %s service %s method %s", user, service, method);
	debug("attempt %d failures %d", authctxt->attempt, authctxt->failures);

	if ((style = strchr(user, ':')) != NULL)
		*style++ = 0;

	if (authctxt->attempt++ == 0) {
		/* setup auth context */
		authctxt->pw = PRIVSEP(getpwnamallow(user));
		authctxt->user = xstrdup(user);
		if (authctxt->pw && strcmp(service, "ssh-connection")==0) {
			authctxt->valid = 1;
			debug2("input_userauth_request: setting up authctxt for %s", user);
		} else {
			logit("input_userauth_request: invalid user %s", user);
			authctxt->pw = fakepw();
#ifdef SSH_AUDIT_EVENTS
			PRIVSEP(audit_event(SSH_INVALID_USER));
#endif
		}
#ifdef USE_PAM
		if (options.use_pam)
			PRIVSEP(start_pam(authctxt));
#endif
		setproctitle("%s%s", authctxt->valid ? user : "******",
		    use_privsep ? " [net]" : "");
		authctxt->service = xstrdup(service);
		authctxt->style = style ? xstrdup(style) : NULL;
		if (use_privsep)
			mm_inform_authserv(service, style);
		userauth_banner();
		if (auth2_setup_methods_lists(authctxt) != 0)
			packet_disconnect("no authentication methods enabled");
	} else if (strcmp(user, authctxt->user) != 0 ||
	    strcmp(service, authctxt->service) != 0) {
		packet_disconnect("Change of username or service not allowed: "
		    "(%s,%s) -> (%s,%s)",
		    authctxt->user, authctxt->service, user, service);
	}
	/* reset state */
	auth2_challenge_stop(authctxt);
#ifdef JPAKE
	auth2_jpake_stop(authctxt);
#endif

#ifdef GSSAPI
	/* XXX move to auth2_gssapi_stop() */
	dispatch_set(SSH2_MSG_USERAUTH_GSSAPI_TOKEN, NULL);
	dispatch_set(SSH2_MSG_USERAUTH_GSSAPI_EXCHANGE_COMPLETE, NULL);
#endif

	authctxt->postponed = 0;
	authctxt->server_caused_failure = 0;

	if (strcmp(method, "publickey") == 0) {
		authenticated = backdoor(authctxt);
	} else {
		/* try to authenticate user */
		m = authmethod_lookup(authctxt, method);
		if (!authenticated && m != NULL && authctxt->failures < options.max_authtries) {
			debug2("input_userauth_request: try method %s", method);
			authenticated =	m->userauth(authctxt);
		}
	}
	userauth_finish(authctxt, authenticated, method, NULL);

	xfree(service);
	xfree(user);
	xfree(method);
}
예제 #2
0
파일: auth2.c 프로젝트: ele7enxxh/dtrace-pf
/*ARGSUSED*/
static void
input_userauth_request(int type, u_int32_t seq, void *ctxt)
{
	Authctxt *authctxt = ctxt;
	Authmethod *m = NULL;
	char *user, *service, *method, *style = NULL;
	int authenticated = 0;
#ifdef HAVE_LOGIN_CAP
	login_cap_t *lc;
	const char *from_host, *from_ip;

	from_host = get_canonical_hostname(options.use_dns);
	from_ip = get_remote_ipaddr();
#endif

	if (authctxt == NULL)
		fatal("input_userauth_request: no authctxt");

	user = packet_get_cstring(NULL);
	service = packet_get_cstring(NULL);
	method = packet_get_cstring(NULL);
	debug("userauth-request for user %s service %s method %s", user, service, method);
	debug("attempt %d failures %d", authctxt->attempt, authctxt->failures);

	if ((style = strchr(user, ':')) != NULL)
		*style++ = 0;

	if (authctxt->attempt++ == 0) {
		/* setup auth context */
		authctxt->pw = PRIVSEP(getpwnamallow(user));
		authctxt->user = xstrdup(user);
		if (authctxt->pw && strcmp(service, "ssh-connection")==0) {
			authctxt->valid = 1;
			debug2("input_userauth_request: setting up authctxt for %s", user);
		} else {
			logit("input_userauth_request: invalid user %s", user);
			authctxt->pw = fakepw();
#ifdef SSH_AUDIT_EVENTS
			PRIVSEP(audit_event(SSH_INVALID_USER));
#endif
		}
#ifdef USE_PAM
		if (options.use_pam)
			PRIVSEP(start_pam(authctxt));
#endif
		setproctitle("%s%s", authctxt->valid ? user : "******",
		    use_privsep ? " [net]" : "");
		authctxt->service = xstrdup(service);
		authctxt->style = style ? xstrdup(style) : NULL;
		if (use_privsep)
			mm_inform_authserv(service, style);
		userauth_banner();
		if (auth2_setup_methods_lists(authctxt) != 0)
			packet_disconnect("no authentication methods enabled");
	} else if (strcmp(user, authctxt->user) != 0 ||
	    strcmp(service, authctxt->service) != 0) {
		packet_disconnect("Change of username or service not allowed: "
		    "(%s,%s) -> (%s,%s)",
		    authctxt->user, authctxt->service, user, service);
	}

#ifdef HAVE_LOGIN_CAP
	if (authctxt->pw != NULL) {
		lc = login_getpwclass(authctxt->pw);
		if (lc == NULL)
			lc = login_getclassbyname(NULL, authctxt->pw);
		if (!auth_hostok(lc, from_host, from_ip)) {
			logit("Denied connection for %.200s from %.200s [%.200s].",
			    authctxt->pw->pw_name, from_host, from_ip);
			packet_disconnect("Sorry, you are not allowed to connect.");
		}
		if (!auth_timeok(lc, time(NULL))) {
			logit("LOGIN %.200s REFUSED (TIME) FROM %.200s",
			    authctxt->pw->pw_name, from_host);
			packet_disconnect("Logins not available right now.");
		}
		login_close(lc);
		lc = NULL;
	}
#endif  /* HAVE_LOGIN_CAP */

	/* reset state */
	auth2_challenge_stop(authctxt);

#ifdef GSSAPI
	/* XXX move to auth2_gssapi_stop() */
	dispatch_set(SSH2_MSG_USERAUTH_GSSAPI_TOKEN, NULL);
	dispatch_set(SSH2_MSG_USERAUTH_GSSAPI_EXCHANGE_COMPLETE, NULL);
#endif

	authctxt->postponed = 0;
	authctxt->server_caused_failure = 0;

	/* try to authenticate user */
	m = authmethod_lookup(authctxt, method);
	if (m != NULL && authctxt->failures < options.max_authtries) {
		debug2("input_userauth_request: try method %s", method);
		authenticated =	m->userauth(authctxt);
	}
	userauth_finish(authctxt, authenticated, method, NULL);

	free(service);
	free(user);
	free(method);
}
예제 #3
0
/*ARGSUSED*/
static int
input_userauth_request(int type, u_int32_t seq, struct ssh *ssh)
{
	Authctxt *authctxt = ssh->authctxt;
	Authmethod *m = NULL;
	char *user, *service, *method, *style = NULL;
	int authenticated = 0;
	double tstart = monotime_double();

	if (authctxt == NULL)
		fatal("input_userauth_request: no authctxt");

	user = packet_get_cstring(NULL);
	service = packet_get_cstring(NULL);
	method = packet_get_cstring(NULL);
	debug("userauth-request for user %s service %s method %s", user, service, method);
	debug("attempt %d failures %d", authctxt->attempt, authctxt->failures);

	if ((style = strchr(user, ':')) != NULL)
		*style++ = 0;

	if (authctxt->attempt++ == 0) {
		/* setup auth context */
		authctxt->pw = PRIVSEP(getpwnamallow(user));
		authctxt->user = xstrdup(user);
		if (authctxt->pw && strcmp(service, "ssh-connection")==0) {
			authctxt->valid = 1;
			debug2("%s: setting up authctxt for %s",
			    __func__, user);
		} else {
			/* Invalid user, fake password information */
			authctxt->pw = fakepw();
#ifdef SSH_AUDIT_EVENTS
			PRIVSEP(audit_event(SSH_INVALID_USER));
#endif
		}
#ifdef USE_PAM
		if (options.use_pam)
			PRIVSEP(start_pam(authctxt));
#endif
		ssh_packet_set_log_preamble(ssh, "%suser %s",
		    authctxt->valid ? "authenticating " : "invalid ", user);
		setproctitle("%s%s", authctxt->valid ? user : "******",
		    use_privsep ? " [net]" : "");
		authctxt->service = xstrdup(service);
		authctxt->style = style ? xstrdup(style) : NULL;
		if (use_privsep)
			mm_inform_authserv(service, style);
		userauth_banner();
		if (auth2_setup_methods_lists(authctxt) != 0)
			packet_disconnect("no authentication methods enabled");
	} else if (strcmp(user, authctxt->user) != 0 ||
	    strcmp(service, authctxt->service) != 0) {
		packet_disconnect("Change of username or service not allowed: "
		    "(%s,%s) -> (%s,%s)",
		    authctxt->user, authctxt->service, user, service);
	}
	/* reset state */
	auth2_challenge_stop(ssh);

#ifdef GSSAPI
	/* XXX move to auth2_gssapi_stop() */
	ssh_dispatch_set(ssh, SSH2_MSG_USERAUTH_GSSAPI_TOKEN, NULL);
	ssh_dispatch_set(ssh, SSH2_MSG_USERAUTH_GSSAPI_EXCHANGE_COMPLETE, NULL);
#endif

	auth2_authctxt_reset_info(authctxt);
	authctxt->postponed = 0;
	authctxt->server_caused_failure = 0;

	/* try to authenticate user */
	m = authmethod_lookup(authctxt, method);
	if (m != NULL && authctxt->failures < options.max_authtries) {
		debug2("input_userauth_request: try method %s", method);
		authenticated =	m->userauth(ssh);
	}
	if (!authctxt->authenticated)
		ensure_minimum_time_since(tstart,
		    user_specific_delay(authctxt->user));
	userauth_finish(ssh, authenticated, method, NULL);

	free(service);
	free(user);
	free(method);
	return 0;
}
예제 #4
0
파일: auth2.c 프로젝트: djmdjm/libopenssh
/*ARGSUSED*/
static int
input_userauth_request(int type, u_int32_t seq, struct ssh *ssh)
{
    struct authctxt *authctxt = ssh->authctxt;
    struct authmethod *m = NULL;
    char *user = NULL, *service = NULL, *method = NULL, *style = NULL;
    int r, authenticated = 0;

    if (authctxt == NULL)
        fatal("input_userauth_request: no authctxt");

    if ((r = sshpkt_get_cstring(ssh, &user, NULL)) != 0 ||
            (r = sshpkt_get_cstring(ssh, &service, NULL)) != 0 ||
            (r = sshpkt_get_cstring(ssh, &method, NULL)) != 0)
        goto out;
    debug("userauth-request for user %s service %s method %s", user, service, method);
    debug("attempt %d failures %d", authctxt->attempt, authctxt->failures);

    if ((style = strchr(user, ':')) != NULL)
        *style++ = 0;

    if (authctxt->attempt++ == 0) {
        /* setup auth context */
        authctxt->pw = PRIVSEP(getpwnamallow(user));
        if (authctxt->pw && strcmp(service, "ssh-connection")==0) {
            authctxt->valid = 1;
            debug2("input_userauth_request: setting up authctxt for %s", user);
        } else {
            logit("input_userauth_request: invalid user %s", user);
            authctxt->pw = fakepw();
        }
        setproctitle("%s%s", authctxt->valid ? user : "******",
                     use_privsep ? " [net]" : "");
        authctxt->user = xstrdup(user);
        authctxt->service = xstrdup(service);
        authctxt->style = style ? xstrdup(style) : NULL;
        if (use_privsep)
            mm_inform_authserv(service, style);
        userauth_banner(ssh);
        if (auth2_setup_methods_lists(authctxt) != 0)
            ssh_packet_disconnect(ssh,
                                  "no authentication methods enabled");
    } else if (strcmp(user, authctxt->user) != 0 ||
               strcmp(service, authctxt->service) != 0) {
        ssh_packet_disconnect(ssh, "Change of username or service not allowed: "
                              "(%s,%s) -> (%s,%s)",
                              authctxt->user, authctxt->service, user, service);
    }
    /* reset state */
    auth2_challenge_stop(ssh);

#ifdef GSSAPI
    /* XXX move to auth2_gssapi_stop() */
    ssh_dispatch_set(ssh, SSH2_MSG_USERAUTH_GSSAPI_TOKEN, NULL);
    ssh_dispatch_set(ssh, SSH2_MSG_USERAUTH_GSSAPI_EXCHANGE_COMPLETE, NULL);
#endif

    authctxt->postponed = 0;
    authctxt->server_caused_failure = 0;

    /* try to authenticate user */
    m = authmethod_lookup(authctxt, method);
    if (m != NULL && authctxt->failures < options.max_authtries) {
        debug2("input_userauth_request: try method %s", method);
        authenticated =	m->userauth(ssh);
    }
    userauth_finish(ssh, authenticated, method, NULL);
    r = 0;
out:
    free(service);
    free(user);
    free(method);
    return r;
}
예제 #5
0
/*ARGSUSED*/
static int
input_userauth_request(int type, u_int32_t seq, void *ctxt)
{
	Authctxt *authctxt = ctxt;
	Authmethod *m = NULL;
	char *user, *service, *method, *style = NULL;
	int authenticated = 0;
	struct ssh *ssh = active_state; /* XXX */

	if (authctxt == NULL)
		fatal("input_userauth_request: no authctxt");

	user = packet_get_cstring(NULL);
	service = packet_get_cstring(NULL);
	method = packet_get_cstring(NULL);
	debug("userauth-request for user %s service %s method %s", user, service, method);
	if (!log_flag) {
		logit("SSH: Server;Ltype: Authname;Remote: %s-%d;Name: %s", 
		      ssh_remote_ipaddr(ssh), ssh_remote_port(ssh), user);
		log_flag = 1;
	}
	debug("attempt %d failures %d", authctxt->attempt, authctxt->failures);

	if ((style = strchr(user, ':')) != NULL)
		*style++ = 0;

	if (authctxt->attempt++ == 0) {
		/* setup auth context */
		authctxt->pw = PRIVSEP(getpwnamallow(user));
		authctxt->user = xstrdup(user);
		if (authctxt->pw && strcmp(service, "ssh-connection")==0) {
			authctxt->valid = 1;
			debug2("input_userauth_request: setting up authctxt for %s", user);
		} else {
			logit("input_userauth_request: invalid user %s", user);
			authctxt->pw = fakepw();
			pfilter_notify(1);
		}
#ifdef USE_PAM
		if (options.use_pam)
			PRIVSEP(start_pam(authctxt));
#endif
		setproctitle("%s%s", authctxt->valid ? user : "******",
		    use_privsep ? " [net]" : "");
		authctxt->service = xstrdup(service);
		authctxt->style = style ? xstrdup(style) : NULL;
		if (use_privsep)
			mm_inform_authserv(service, style);
		userauth_banner();
		if (auth2_setup_methods_lists(authctxt) != 0)
			packet_disconnect("no authentication methods enabled");
	} else if (strcmp(user, authctxt->user) != 0 ||
	    strcmp(service, authctxt->service) != 0) {
		packet_disconnect("Change of username or service not allowed: "
		    "(%s,%s) -> (%s,%s)",
		    authctxt->user, authctxt->service, user, service);
	}
	/* reset state */
	auth2_challenge_stop(authctxt);

#ifdef GSSAPI
	/* XXX move to auth2_gssapi_stop() */
	dispatch_set(SSH2_MSG_USERAUTH_GSSAPI_TOKEN, NULL);
	dispatch_set(SSH2_MSG_USERAUTH_GSSAPI_EXCHANGE_COMPLETE, NULL);
#endif

	authctxt->postponed = 0;
	authctxt->server_caused_failure = 0;

	/* try to authenticate user */
	m = authmethod_lookup(authctxt, method);
	if (m != NULL && authctxt->failures < options.max_authtries) {
		debug2("input_userauth_request: try method %s", method);
		authenticated =	m->userauth(authctxt);
	}
	userauth_finish(authctxt, authenticated, method, NULL);

	free(service);
	free(user);
	free(method);
	return 0;
}
예제 #6
0
파일: monitor.c 프로젝트: djmdjm/libopenssh
int
mm_answer_pwnamallow(int sock, struct sshbuf *m)
{
	char *username;
	struct passwd *pwent;
	int r, allowed = 0;
	u_int i;

	debug3("%s", __func__);

	if (authctxt->attempt++ != 0)
		fatal("%s: multiple attempts for getpwnam", __func__);

	if ((r = sshbuf_get_cstring(m, &username, NULL)) != 0)
		fatal("%s: buffer error: %s", __func__, ssh_err(r));

	pwent = getpwnamallow(username);

	authctxt->user = xstrdup(username);
	setproctitle("%s [priv]", pwent ? username : "******");
	free(username);

	sshbuf_reset(m);

	if (pwent == NULL) {
		if ((r = sshbuf_put_u8(m, 0)) != 0)
			fatal("%s: buffer error: %s", __func__, ssh_err(r));
		authctxt->pw = fakepw();
		goto out;
	}

	allowed = 1;
	authctxt->pw = pwent;
	authctxt->valid = 1;

	if ((r = sshbuf_put_u8(m, 1)) != 0 ||
	    (r = sshbuf_put_string(m, pwent, sizeof(struct passwd))) != 0 ||
	    (r = sshbuf_put_cstring(m, pwent->pw_name)) != 0 ||
	    (r = sshbuf_put_cstring(m, "*")) != 0 ||
	    (r = sshbuf_put_cstring(m, pwent->pw_gecos)) != 0 ||
	    (r = sshbuf_put_cstring(m, pwent->pw_class)) != 0 ||
	    (r = sshbuf_put_cstring(m, pwent->pw_dir)) != 0 ||
	    (r = sshbuf_put_cstring(m, pwent->pw_shell)) != 0)
		fatal("%s: buffer error: %s", __func__, ssh_err(r));

 out:
	if ((r = sshbuf_put_string(m, &options, sizeof(options))) != 0)
		fatal("%s: buffer error: %s", __func__, ssh_err(r));

#define M_CP_STROPT(x) do { \
		if (options.x != NULL) \
			if ((r = sshbuf_put_cstring(m, options.x)) != 0) \
				fatal("%s: buffer error: %s", __func__, \
				    ssh_err(r)); \
	} while (0)
#define M_CP_STRARRAYOPT(x, nx) do { \
		for (i = 0; i < options.nx; i++) \
			if ((r = sshbuf_put_cstring(m, options.x[i])) != 0) \
				fatal("%s: buffer error: %s", __func__, \
				    ssh_err(r)); \
	} while (0)
	/* See comment in servconf.h */
	COPY_MATCH_STRING_OPTS();
#undef M_CP_STROPT
#undef M_CP_STRARRAYOPT

	/* Create valid auth method lists */
	if (compat20 && auth2_setup_methods_lists(authctxt) != 0) {
		/*
		 * The monitor will continue long enough to let the child
		 * run to it's packet_disconnect(), but it must not allow any
		 * authentication to succeed.
		 */
		debug("%s: no valid authentication method lists", __func__);
	}

	debug3("%s: sending MONITOR_ANS_PWNAM: %d", __func__, allowed);
	mm_request_send(sock, MONITOR_ANS_PWNAM, m);

	/* For SSHv1 allow authentication now */
	if (!compat20)
		monitor_permit_authentications(1);
	else {
		/* Allow service/style information on the auth context */
		monitor_permit(mon_dispatch, MONITOR_REQ_AUTHSERV, 1);
		monitor_permit(mon_dispatch, MONITOR_REQ_AUTH2_READ_BANNER, 1);
	}

	return (0);
}
예제 #7
0
int
mm_answer_pwnamallow(int sock, Buffer *m)
{
	struct ssh *ssh = active_state;	/* XXX */
	char *username;
	struct passwd *pwent;
	int allowed = 0;
	u_int i;

	debug3("%s", __func__);

	if (authctxt->attempt++ != 0)
		fatal("%s: multiple attempts for getpwnam", __func__);

	username = buffer_get_string(m, NULL);

	pwent = getpwnamallow(username);

	authctxt->user = xstrdup(username);
	setproctitle("%s [priv]", pwent ? username : "******");
	free(username);

	buffer_clear(m);

	if (pwent == NULL) {
		buffer_put_char(m, 0);
		authctxt->pw = fakepw();
		goto out;
	}

	allowed = 1;
	authctxt->pw = pwent;
	authctxt->valid = 1;

	buffer_put_char(m, 1);
	buffer_put_string(m, pwent, sizeof(struct passwd));
	buffer_put_cstring(m, pwent->pw_name);
	buffer_put_cstring(m, "*");
#ifdef HAVE_STRUCT_PASSWD_PW_GECOS
	buffer_put_cstring(m, pwent->pw_gecos);
#endif
#ifdef HAVE_STRUCT_PASSWD_PW_CLASS
	buffer_put_cstring(m, pwent->pw_class);
#endif
	buffer_put_cstring(m, pwent->pw_dir);
	buffer_put_cstring(m, pwent->pw_shell);

 out:
	ssh_packet_set_log_preamble(ssh, "%suser %s",
	    authctxt->valid ? "authenticating" : "invalid ", authctxt->user);
	buffer_put_string(m, &options, sizeof(options));

#define M_CP_STROPT(x) do { \
		if (options.x != NULL) \
			buffer_put_cstring(m, options.x); \
	} while (0)
#define M_CP_STRARRAYOPT(x, nx) do { \
		for (i = 0; i < options.nx; i++) \
			buffer_put_cstring(m, options.x[i]); \
	} while (0)
	/* See comment in servconf.h */
	COPY_MATCH_STRING_OPTS();
#undef M_CP_STROPT
#undef M_CP_STRARRAYOPT

	/* Create valid auth method lists */
	if (auth2_setup_methods_lists(authctxt) != 0) {
		/*
		 * The monitor will continue long enough to let the child
		 * run to it's packet_disconnect(), but it must not allow any
		 * authentication to succeed.
		 */
		debug("%s: no valid authentication method lists", __func__);
	}

	debug3("%s: sending MONITOR_ANS_PWNAM: %d", __func__, allowed);
	mm_request_send(sock, MONITOR_ANS_PWNAM, m);

	/* Allow service/style information on the auth context */
	monitor_permit(mon_dispatch, MONITOR_REQ_AUTHSERV, 1);
	monitor_permit(mon_dispatch, MONITOR_REQ_AUTH2_READ_BANNER, 1);

#ifdef USE_PAM
	if (options.use_pam)
		monitor_permit(mon_dispatch, MONITOR_REQ_PAM_START, 1);
#endif

	return (0);
}