BOOST_FORCEINLINE
void await_next(std::size_t depth, Iter iter, boost::mpl::true_,
boost::mpl::false_)
{
typedef
typename boost::fusion::result_of::next<Iter>::type
next_type;
typedef
typename util::decay_unwrap<
typename boost::fusion::result_of::deref<Iter>::type
>::type
future_type;
future_type & f_ =
boost::fusion::deref(iter);
typedef
typename traits::future_traits<
future_type
>::type
future_result_type;
boost::intrusive_ptr<
lcos::detail::future_data<future_result_type>
> next_future_data
= lcos::detail::get_shared_state(f_);
if(!next_future_data->is_ready())
{
next_future_data->execute_deferred();
// execute_deferred might have made the future ready
if (!next_future_data->is_ready())
{
void (dataflow_frame::*f)(
std::size_t, Iter,
boost::mpl::true_, boost::mpl::false_
) = &dataflow_frame::await_next_respawn;
boost::intrusive_ptr<dataflow_frame> this_(this);
next_future_data->set_on_completed(
hpx::util::bind(
f
, std::move(this_)
, ++depth
, std::move(iter)
, boost::mpl::true_()
, boost::mpl::false_()
)
);
return;
}
}
typedef boost::mpl::bool_<
boost::is_same<next_type, end_type>::value
> is_at_end;
// re-spawn on a new thread to avoid stack overflows
if (depth >= HPX_CONTINUATION_MAX_RECURSION_DEPTH)
{
respawn_await(boost::fusion::next(iter), is_at_end());
return;
}
await(++depth, boost::fusion::next(iter), is_at_end());
}
void
main(void)
{
uint32 nrftx = 0, nrxuf = 0;
int i = 0;
static __xdata Rcall c;
uint8 state = Idle;
uint8 waitflag = 0, clearflag = 0;
uint8 laststate, lastflag, lastMARCSTATE;
laststate = state;
lastflag = flag;
lastMARCSTATE = MARCSTATE;
memset(&curcall, 0, sizeof curcall);
SLEEP &= ~SLEEP_OSC_PD;
await(SLEEP & SLEEP_XOSC_S);
CLKCON = (CLKCON & ~(CLKCON_CLKSPD | CLKCON_OSC)) | CLKSPD_DIV_1;
await(!(CLKCON & CLKCON_OSC));
SLEEP |= SLEEP_OSC_PD;
await(SLEEP & SLEEP_XOSC_S);
P1DIR |= LEDBITS;
printinit();
srvinit();
rfinit();
GREEN = RED = 0;
// Enables interrupts. (Go go go)
EA = 1;
wdinit();
dprint("pingrf started.\n");
srvrx();
for(;;){
wdreset();
if(flag&Fpanic){
GREEN = 0;
RED = 0;
for(;;){
RED ^= 1;
sleep(1000);
/* TODO: reset */
}
}
if((flag&clearflag) != 0)
flag &= ~(flag&clearflag);
switch(state){
case Idle:
if(peekcall()->type == Nop)
break;
nextcall(&c);
waitflag = clearflag = 0;
call(&c, &state, &waitflag, &clearflag);
break;
case Reply:
reply(&c);
state = Replying;
break;
case Replying:
if(flag&Ftxcall){
flag &= ~Ftxcall;
state = Idle;
}
// GREEN=1;
break;
default:
if((flag&waitflag) != 0){
waitflag = flag&waitflag;
flag &= ~waitflag;
call(&c, &state, &waitflag, &clearflag);
}
/*
if((flag&waitflag)==waitflag){
flag &= ~waitflag;
call(&c, &state, &waitflag, &clearflag);
}
*/
break;
}
#ifdef DEBUG
if((i++%100000 == 0) || (flag != lastflag || state != laststate | lastMARCSTATE != MARCSTATE)){
//__critical {
wdreset();
switch(state){
case Idle:
dprint("idle"); break;
case Replying:
case Reply:
dprint("replying %d", c.type);
break;
default:
dprint("handling(%d) %d", state, c.type);;
break;
}
lastflag = flag;
laststate = state;
lastMARCSTATE = MARCSTATE;
dprint(" flag=");
printflag(flag);
dprint(" waitflag=");
printflag(waitflag);
dprint(" radio=%s\n", strmarcstate(lastMARCSTATE));
// dprint(" flag=%F waitflag=%F radio=%S\n", flag, waitflag, lastMARCSTATE);
//
// putchar('.');
// putchar('\n');
//}
}
#endif
}
}
void await_range(std::size_t depth, TupleIter iter,
Iter next, Iter end)
{
void (dataflow_frame::*f)(
std::size_t, TupleIter, Iter, Iter
) = &dataflow_frame::await_range_respawn;
for (/**/; next != end; ++next)
{
typedef
typename std::iterator_traits<
Iter
>::value_type
future_type;
typedef
typename traits::future_traits<
future_type
>::type
future_result_type;
boost::intrusive_ptr<
lcos::detail::future_data<future_result_type>
> next_future_data
= lcos::detail::get_shared_state(*next);
if (!next_future_data->is_ready())
{
next_future_data->execute_deferred();
// execute_deferred might have made the future ready
if (!next_future_data->is_ready())
{
boost::intrusive_ptr<dataflow_frame> this_(this);
next_future_data->set_on_completed(
boost::bind(
f
, std::move(this_)
, ++depth
, std::move(iter)
, std::move(next)
, std::move(end)
)
);
return;
}
}
}
typedef
typename boost::fusion::result_of::next<TupleIter>::type
next_type;
typedef boost::mpl::bool_<
boost::is_same<next_type, end_type>::value
> is_at_end;
// re-spawn on a new thread to avoid stack overflows
if (depth >= HPX_CONTINUATION_MAX_RECURSION_DEPTH)
{
respawn_await(boost::fusion::next(iter), is_at_end());
return;
}
await(++depth, boost::fusion::next(iter), is_at_end());
}
Future<Nothing> CurlFetcherPlugin::fetch(
const URI& uri,
const string& directory)
{
// TODO(jieyu): Validate the given URI.
if (!uri.has_path()) {
return Failure("URI path is not specified");
}
Try<Nothing> mkdir = os::mkdir(directory);
if (mkdir.isError()) {
return Failure(
"Failed to create directory '" +
directory + "': " + mkdir.error());
}
// TODO(jieyu): Allow user to specify the name of the output file.
const string output = path::join(directory, Path(uri.path()).basename());
const vector<string> argv = {
"curl",
"-s", // Don’t show progress meter or error messages.
"-S", // Makes curl show an error message if it fails.
"-L", // Follow HTTP 3xx redirects.
"-w", "%{http_code}", // Display HTTP response code on stdout.
"-o", output, // Write output to the file.
strings::trim(stringify(uri))
};
Try<Subprocess> s = subprocess(
"curl",
argv,
Subprocess::PATH("/dev/null"),
Subprocess::PIPE(),
Subprocess::PIPE());
if (s.isError()) {
return Failure("Failed to exec the curl subprocess: " + s.error());
}
return await(
s.get().status(),
io::read(s.get().out().get()),
io::read(s.get().err().get()))
.then([](const tuple<
Future<Option<int>>,
Future<string>,
Future<string>>& t) -> Future<Nothing> {
Future<Option<int>> status = std::get<0>(t);
if (!status.isReady()) {
return Failure(
"Failed to get the exit status of the curl subprocess: " +
(status.isFailed() ? status.failure() : "discarded"));
}
if (status->isNone()) {
return Failure("Failed to reap the curl subprocess");
}
if (status->get() != 0) {
Future<string> error = std::get<2>(t);
if (!error.isReady()) {
return Failure(
"Failed to perform 'curl'. Reading stderr failed: " +
(error.isFailed() ? error.failure() : "discarded"));
}
return Failure("Failed to perform 'curl': " + error.get());
}
Future<string> output = std::get<1>(t);
if (!output.isReady()) {
return Failure(
"Failed to read stdout from 'curl': " +
(output.isFailed() ? output.failure() : "discarded"));
}
// Parse the output and get the HTTP response code.
Try<int> code = numify<int>(output.get());
if (code.isError()) {
return Failure("Unexpected output from 'curl': " + output.get());
}
if (code.get() != http::Status::OK) {
return Failure(
"Unexpected HTTP response code: " +
http::Status::string(code.get()));
}
return Nothing();
});
}
int execute(TREPTR argt, int execflg, int *pf1, int *pf2)
{
/* `stakbot' is preserved by this routine */
register TREPTR t;
STKPTR sav = savstak();
sigchk();
if ((t = argt) && execbrk == 0) {
register int treeflgs;
int oldexit, type;
register char **com;
treeflgs = t->tretyp;
type = treeflgs & COMMSK;
oldexit = exitval;
exitval = 0;
switch (type) {
case TCOM:
{
STRING a1;
int argn, internal;
ARGPTR schain = gchain;
IOPTR io = t->treio;
gchain = 0;
argn = getarg((void *)t);/*FIXME*/
com = scan(argn);
a1 = com[1];
gchain = schain;
if ((internal = syslook(com[0], commands)) || argn == 0)
setlist(((COMPTR) t)->comset, 0);
if (argn && (flags & noexec) == 0) { /* print command if execpr */
if (flags & execpr) {
argn = 0;
prs(execpmsg);
while (com[argn] != ENDARGS) {
prs(com[argn++]);
blank();
}
newline();
}
switch (internal) {
case SYSDOT:
if (a1) {
register int f;
if ((f = pathopen(getpath(a1), a1)) < 0)
failed(a1, notfound);
else
execexp(0, f);
}
break;
case SYSTIMES:
{
struct tms t;
times(&t);
prt(t.tms_cutime);
blank();
prt(t.tms_cstime);
newline();
}
break;
case SYSEXIT:
exitsh(a1 ? stoi(a1) : oldexit);
case SYSNULL:
io = 0;
break;
case SYSCONT:
execbrk = -loopcnt;
break;
case SYSBREAK:
if ((execbrk = loopcnt) && a1)
breakcnt = stoi(a1);
break;
case SYSTRAP:
if (a1) {
BOOL clear;
if ((clear = digit(*a1)) == 0)
++com;
while (*++com) {
int i;
if ((i = stoi(*com)) >= MAXTRAP || i < MINTRAP)
failed(*com, badtrap);
else if (clear)
clrsig(i);
else {
replace(&trapcom[i], a1);
if (*a1)
getsig(i);
else
ignsig(i);
}
}
} else { /* print out current traps */
int i;
for (i = 0; i < MAXTRAP; i++) {
if (trapcom[i]) {
prn(i);
prs(colon);
prs(trapcom[i]);
newline();
}
}
}
break;
case SYSEXEC:
com++;
initio(io);
ioset = 0;
io = 0;
if (a1 == 0)
break;
case SYSLOGIN:
flags |= forked;
oldsigs();
execa((const char **)com);
done();
case SYSCD:
if (flags & rshflg)
failed(com[0], restricted);
else if ((a1 == 0 && (a1 = (char *)homenod.namval) == 0) || chdir(a1) < 0) /* FIXME */
failed(a1, baddir);
break;
case SYSSHFT:
if (dolc < 1)
error(badshift);
else {
dolv++;
dolc--;
}
assnum(&dolladr, dolc);
break;
case SYSWAIT:
await(-1);
break;
case SYSREAD:
exitval = readvar(&com[1]);
break;
/*
case SYSTST:
exitval=testcmd(com);
break;
*/
case SYSSET:
if (a1) {
int argc;
argc = options(argn, (const char **)com);
if (argc > 1)
setargs((const char **)com + argn - argc);
} else if (((COMPTR) t)->comset == 0)
/* Scan name chain and print */
namscan(printnam);
break;
case SYSRDONLY:
exitval = N_RDONLY;
case SYSXPORT:
if (exitval == 0)
exitval = N_EXPORT;;
if (a1) {
while (*++com)
attrib(lookup(*com), exitval);
} else {
namscan(printflg);
}
exitval = 0;
break;
case SYSEVAL:
if (a1)
execexp(a1, (UFD)&com[2]); /* FIXME */
break;
case SYSUMASK:
if (a1) {
int c, i;
i = 0;
while ((c = *a1++) >= '0' && c <= '7')
i = (i << 3) + c - '0';
umask(i);
} else {
int i, j;
umask(i = umask(0));
prc('0');
for (j = 6; j >= 0; j -= 3)
prc(((i >> j) & 07) + '0');
newline();
}
break;
default:
internal = builtin(argn, com);
}
if (internal) {
if (io)
error(illegal);
chktrap();
break;
}
} else if (t->treio == 0)
break;
}
case TFORK:
if (execflg && (treeflgs & (FAMP | FPOU)) == 0)
parent = 0;
else {
while ((parent = fork()) == -1) {
sigchk();
alarm(10);
pause();
}
}
if (parent) { /* This is the parent branch of fork; */
/* it may or may not wait for the child. */
if (treeflgs & FPRS && flags & ttyflg) {
prn(parent);
newline();
}
if (treeflgs & FPCL)
closepipe(pf1);
if ((treeflgs & (FAMP | FPOU)) == 0)
await(parent);
else if ((treeflgs & FAMP) == 0)
post(parent);
else
assnum(&pcsadr, parent);
chktrap();
break;
} else { /* this is the forked branch (child) of execute */
flags |= forked;
iotemp = 0;
postclr();
settmp();
/* Turn off INTR and QUIT if `FINT' */
/* Reset ramaining signals to parent */
/* except for those `lost' by trap */
oldsigs();
if (treeflgs & FINT) {
signal(INTR, SIG_IGN);
signal(QUIT, SIG_IGN);
}
/* pipe in or out */
if (treeflgs & FPIN) {
sh_rename(pf1[INPIPE], 0);
close(pf1[OTPIPE]);
}
if (treeflgs & FPOU) {
sh_rename(pf2[OTPIPE], 1);
close(pf2[INPIPE]);
}
/* default std input for & */
if (treeflgs & FINT && ioset == 0)
sh_rename(chkopen(devnull), 0);
/* io redirection */
initio(t->treio);
if (type != TCOM)
execute(((FORKPTR) t)->forktre, 1, NULL, NULL);
else if (com[0] != ENDARGS) {
setlist(((COMPTR) t)->comset, N_EXPORT);
execa((const char **)com);
}
done();
}
case TPAR:
sh_rename(dup(2), output);
execute(((PARPTR) t)->partre, execflg, NULL, NULL);
done();
case TFIL:
{
int pv[2];
chkpipe(pv);
if (execute(((LSTPTR) t)->lstlef, 0, pf1, pv) == 0)
execute(((LSTPTR) t)->lstrit, execflg, pv, pf2);
else
closepipe(pv);
break;
}
case TLST:
execute(((LSTPTR) t)->lstlef, 0, NULL, NULL);
execute(((LSTPTR) t)->lstrit, execflg, NULL, NULL);
break;
case TAND:
if (execute(((LSTPTR) t)->lstlef, 0, NULL, NULL) == 0)
execute(((LSTPTR) t)->lstrit, execflg, NULL, NULL);
break;
case TORF:
if (execute(((LSTPTR) t)->lstlef, 0, NULL, NULL) != 0)
execute(((LSTPTR) t)->lstrit, execflg, NULL, NULL);
break;
case TFOR:
{
NAMPTR n = lookup(((FORPTR) t)->fornam);
char **args;
DOLPTR argsav = 0;
if (((FORPTR) t)->forlst == 0) {
args = (char **)dolv + 1;
argsav = useargs();
} else {
ARGPTR schain = gchain;
gchain = 0;
trim((args = scan(getarg(((FORPTR) t)->forlst)))[0]);
gchain = schain;
}
loopcnt++;
while (*args != ENDARGS && execbrk == 0) {
assign(n, *args++);
execute(((FORPTR) t)->fortre, 0, NULL, NULL);
if (execbrk < 0) {
execbrk = 0;
}
}
if (breakcnt)
breakcnt--;
execbrk = breakcnt;
loopcnt--;
argfor = freeargs(argsav);
break;
}
case TWH:
case TUN:
{
int i = 0;
loopcnt++;
while (execbrk == 0 && (execute(((WHPTR) t)->whtre, 0, NULL, NULL) == 0) == (type == TWH)) {
i = execute(((WHPTR) t)->dotre, 0, NULL, NULL);
if (execbrk < 0)
execbrk = 0;
}
if (breakcnt)
breakcnt--;
execbrk = breakcnt;
loopcnt--;
exitval = i;
break;
}
case TIF:
if (execute(((IFPTR) t)->iftre, 0, NULL, NULL) == 0)
execute(((IFPTR) t)->thtre, execflg, NULL, NULL);
else
execute(((IFPTR) t)->eltre, execflg, NULL, NULL);
break;
case TSW:
{
register char *r = mactrim(((SWPTR) t)->swarg);
t = (TREPTR) ((SWPTR) t)->swlst;
while (t) {
ARGPTR rex = ((REGPTR) t)->regptr;
while (rex) {
register char *s;
if (gmatch(r, s = macro(rex->argval)) || (trim(s), eq(r, s))) {
execute(((REGPTR)t)->regcom, 0, NULL, NULL);
t = 0;
break;
} else
rex = ((ARGPTR)rex)->argnxt;
}
if (t)
t = (TREPTR) ((REGPTR) t)->regnxt;
}
}
break;
}
exitset();
}
/*ARGSUSED*/
scsi_ret_t
scdisk_open(
target_info_t *tgt,
io_req_t req)
{
register int i;
register scsi_ret_t ret = SCSI_RET_SUCCESS;
unsigned int disk_size, secs_per_cyl, sector_size;
unsigned int nsectors, ntracks, ncylinders;
scsi_rcap_data_t *cap;
struct disklabel *label = 0;
io_req_t ior;
void (*readfun)(
target_info_t *tgt,
unsigned int secno,
io_req_t ior) = scdisk_read;
char *data, *rdata = 0;
boolean_t look_for_label;
if (tgt->flags & TGT_ONLINE)
return SCSI_RET_SUCCESS;
tgt->lun = rzlun(req->io_unit);
/*
* Dummy ior for proper sync purposes
*/
io_req_alloc(ior);
bzero((char *)ior, sizeof(*ior));
simple_lock_init(&(ior)->io_req_lock, ETAP_IO_REQ);
#if 0
/*
* Set the LBN to tgt->block_size with a MODE SELECT.
* xxx do a MODE SENSE instead ?
*/
/*
* Ugh. Can't use tgt->block_size here -- not set up
* yet. Also can't use DEV_BSIZE. So...since MK6
* dispenses with this command entirely, let's do
* so as well.
*/
for (i = 0; i < 5; i++) {
ior->io_op = IO_INTERNAL;
ior->io_error = 0;
ret = scdisk_mode_select(tgt, tgt->block_size, ior,0,0,FALSE);
if (ret == SCSI_RET_SUCCESS)
break;
if (ret == SCSI_RET_RETRY) {
timeout((timeout_fcn_t)wakeup, tgt, 2*hz);
await(tgt);
}
if (ret == SCSI_RET_DEVICE_DOWN)
goto done;
}
if (ret != SCSI_RET_SUCCESS) {
scsi_error( tgt, SCSI_ERR_MSEL, ret, 0);
ret = D_INVALID_SIZE;
goto done;
}
#endif
#ifdef hp_pa
if (tgt->flags & TGT_REMOVABLE_MEDIA) {
scsi_mode_sense_page5_t *page5;
unsigned char mode_save[0xff];
scsi_mode_select_param_t *parm;
int length;
if((ret = scsi_mode_sense(tgt, 0x05, 0xff, 0))
!= SCSI_RET_SUCCESS)
goto done;
length = *tgt->cmd_ptr + 1;
bcopy(tgt->cmd_ptr, mode_save, length);
page5 = (scsi_mode_sense_page5_t *)(mode_save + 4 + mode_save[3]);
#if 1
/* force sector size to 512 */
parm = (scsi_mode_select_param_t *)mode_save;
parm->reserved1 = 0;
parm->medium_type = 2;
parm->device_spec &= ~0x90;
parm->descs[0].density_code = 2;
parm->descs[0].nblocks1 = 0;
parm->descs[0].nblocks2 = 0;
parm->descs[0].nblocks3 = 0;
parm->descs[0].reclen1 = 0x2;
parm->descs[0].reclen2 = 0;
parm->descs[0].reclen3 = 0;
page5->ps = 0;
page5->page_code &= ~0x80;
page5->sectors_per_track = page5->sectors_per_track *
(page5->bytes_per_sector_msb << 8 |
page5->bytes_per_sector_lsb) /
512;
page5->bytes_per_sector_msb = 2;
page5->bytes_per_sector_lsb = 0;
length -= parm->desc_len;
parm->desc_len = 0;
bcopy((const char*)page5, mode_save+4, sizeof(*page5));
if((ret = scdisk_mode_select(tgt, 0, 0, mode_save, length, 0))
!= SCSI_RET_SUCCESS)
goto done;
if((ret = scsi_mode_sense(tgt, 0x05, 0xff, 0))
!= SCSI_RET_SUCCESS)
goto done;
length = *tgt->cmd_ptr + 1;
bcopy(tgt->cmd_ptr, mode_save, length);
#endif
ntracks = page5->number_of_heads;
nsectors = page5->sectors_per_track;
sector_size = page5->bytes_per_sector_msb << 8 |
page5->bytes_per_sector_lsb;
ncylinders = page5->number_of_cylinders_msb << 8 |
page5->number_of_cylinders_lsb;
secs_per_cyl = nsectors * ntracks;
look_for_label = FALSE;
geom_done = TRUE;
}
#endif
/*
* Do a READ CAPACITY to get max size. Check LBN too.
*/
for (i = 0; i < 5; i++) {
ior->io_op = IO_INTERNAL;
ior->io_error = 0;
ret = scsi_read_capacity(tgt, 0, ior);
if (ret == SCSI_RET_SUCCESS)
break;
if (ret == SCSI_RET_RETRY) {
timeout((timeout_fcn_t)wakeup, tgt, 2*hz);
await(tgt);
}
if (ret == SCSI_RET_DEVICE_DOWN)
goto done;
}
if (ret != SCSI_RET_SUCCESS) {
scsi_error( tgt, SCSI_ERR_MSEL, ret, 0);
ret = D_INVALID_SIZE;
goto done;
}
cap = (scsi_rcap_data_t*) tgt->cmd_ptr;
disk_size = (cap->lba1<<24) |
(cap->lba2<<16) |
(cap->lba3<< 8) |
cap->lba4 + 1;
if (scsi_debug)
printf("rz%d holds %d blocks\n", tgt->unit_no, disk_size);
tgt->block_size = (cap->blen1<<24) |
(cap->blen2<<16) |
(cap->blen3<<8 ) |
cap->blen4;
if (scsi_debug) {
printf("rz%d block size is %d bytes/block\n",
tgt->unit_no, tgt->block_size);
}
if (tgt->block_size > RZDISK_MAX_SECTOR || tgt->block_size <= 0) {
ret = D_INVALID_SIZE;
goto done;
}
rdata = (char *) kalloc(2*tgt->block_size);
if (round_page(rdata) == round_page(rdata + tgt->block_size))
data = rdata;
else
data = (char *)round_page(rdata);
#ifdef POWERMAC
/* XXX TODO NMGS remove! must be cache aligned for now */
if ((unsigned long)data & 0x1f)
data = (char*)((unsigned long)(data + 0x1f) & ~0x1f);
if (round_page(data) != round_page(data + tgt->block_size))
data = (char *)round_page(data);
#endif /* POWERMAC */
if (disk_size > SCSI_CMD_READ_MAX_LBA)
tgt->flags |= TGT_BIG;
/*
* Mandatory long-form commands ?
*/
if (BGET(scsi_use_long_form,(unsigned char)tgt->masterno,tgt->target_id))
tgt->flags |= TGT_BIG;
if (tgt->flags & TGT_BIG)
readfun = scsi_long_read;
ior->io_op = IO_INTERNAL;
ior->io_error = 0;
#ifdef hp_pa
if(geom_done)
goto setup_label;
#endif
/*
* Find out about the phys disk geometry
*/
#if PARAGON860
/*
* The NCR RAID controller does not support a read capacity command
* with the Partial Medium Indicator (PMI) bit set. Therefore we
* have to calculate the number of sectors per cylinder from data
* in the mode select pages. This method should work for standalone
* disks as well.
*/
/*
* Read page 3 to find the number of sectors/track and bytes/sector
*/
ret = scsi_mode_sense(tgt, 0x03, 0xff, ior);
/* scsi_error(...) */
{
scsi_mode_sense_page3_t *page3;
page3 = (scsi_mode_sense_page3_t *)
(((scsi_mode_sense_data_t *)tgt->cmd_ptr) + 1);
nsectors = (page3->sectors_per_track_msb << 8) |
page3->sectors_per_track_lsb;
sector_size = (page3->bytes_per_sector_msb << 8) |
page3->bytes_per_sector_lsb;
}
ior->io_op = IO_INTERNAL;
ior->io_error = 0;
/*
* Read page 4 to find the number of cylinders and tracks/cylinder
*/
ret = scsi_mode_sense(tgt, 0x04, 0xff, ior);
/* scsi_error(...) */
{
scsi_mode_sense_page4_t *page4;
page4 = (scsi_mode_sense_page4_t *)
(((scsi_mode_sense_data_t *)tgt->cmd_ptr) + 1);
ncylinders = (page4->number_of_cylinders_msb << 16) |
(page4->number_of_cylinders << 8) |
page4->number_of_cylinders_lsb;
ntracks = page4->number_of_heads;
}
/*
* Calculate the sectors per cylinder (sec/track * tracks/cyl)
*/
secs_per_cyl = nsectors * ntracks;
if (scsi_debug) {
printf("rz%d: %d bytes/sec %d sec/track\n", tgt->unit_no,
sector_size, nsectors);
printf(" %d tracks/cyl %d cyl/unit\n",
ntracks, ncylinders);
}
#else /* PARAGON860 */
/* Read page one to get read / write error recovery info */
ret = scsi_mode_sense(tgt, 0x01, 0xff, ior);
if(ret == SCSI_RET_SUCCESS) {
scsi_mode_sense_page1_t *page1;
unsigned char mode_save[0xff];
int length;
length = *tgt->cmd_ptr + 1;
bcopy(tgt->cmd_ptr, mode_save, length);
page1 = (scsi_mode_sense_page1_t *)(mode_save + 4 + mode_save[3]);
*mode_save = 0; /* mode data length */
page1->ps = 0;
page1->flags = PAGE1_AWRE | PAGE1_ARRE | PAGE1_TB | PAGE1_PER;
/*
* Enable automatic reallocation of bad blocks,
* Report any recovered errors.
*/
ior->io_op = IO_INTERNAL;
ior->io_error = 0;
ret = scdisk_mode_select(tgt, 0, ior, mode_save, length, 0);
if(ret != SCSI_RET_SUCCESS) {
if (scsi_debug)
printf("rz%d: Can't change error recovery parameters\n",
tgt->unit_no);
}
}
ior->io_op = IO_INTERNAL;
ior->io_error = 0;
#ifdef POWERMAC
tgt->flags |= TGT_OPTIONAL_CMD;
#endif
ret = scsi_read_capacity( tgt, 1, ior);
#ifdef POWERMAC
tgt->flags &= ~TGT_OPTIONAL_CMD;
#endif
/* scsi_error(...) */
if (ret) {
secs_per_cyl = 16;
sector_size = tgt->block_size;
} else {
cap = (scsi_rcap_data_t*) tgt->cmd_ptr;
secs_per_cyl = (cap->lba1<<24) | (cap->lba2<<16) |
(cap->lba3<< 8) | cap->lba4;
secs_per_cyl += 1;
sector_size = (cap->blen1<<24) | (cap->blen2<<16) |
(cap->blen3<<8 ) | cap->blen4;
}
if (scsi_debug)
printf("rz%d: %d sect/cyl %d bytes/sec\n", tgt->unit_no,
secs_per_cyl, sector_size);
#endif /* PARAGON860 */
#if NSCSI2 > 0
/*
* ... and a bunch of other things for scsi2
*/
#endif /* NSCSI2 > 0 */
/*
* Get partition table off pack
*/
if (tgt->dev_ops == &scsi_devsw[SCSI_CDROM]) {
/* no label on a CD-ROM */
look_for_label = FALSE;
} else {
look_for_label = TRUE;
}
setup_label:
if (look_for_label) {
/* first look for a BSD label */
ior->io_data = data;
ior->io_count = tgt->block_size;
ior->io_op = IO_READ;
ior->io_error = 0;
tgt->ior = ior;
(*readfun)( tgt, LABELOFFSET/tgt->block_size, ior);
iowait(ior);
if (!ior->io_error) {
/* Search for BSD label, might be a bit further along */
register int j;
for (i = LABELOFFSET % tgt->block_size;
i < (tgt->block_size-sizeof(struct disklabel));
i += sizeof(int)) {
label = (struct disklabel *) &data[i];
if (label->d_magic == DISKMAGIC &&
label->d_magic2 == DISKMAGIC) {
break;
} else
label = (struct disklabel *) 0;
}
}
} else {
label = (struct disklabel *) 0;
}
if (label) {
if (scsi_debug)
printf("{Using BSD label}");
tgt->dev_info.disk.l = *label;
} else {
/* then look for a vendor's label, but first
fill in defaults and what we found */
label = &tgt->dev_info.disk.l;
*label = scsi_default_label;
label->d_secsize = sector_size;
label->d_nsectors = nsectors;
label->d_ntracks = ntracks;
label->d_ncylinders = ncylinders;
label->d_secpercyl = secs_per_cyl;
label->d_secperunit = disk_size;
ior->io_data = data;
if (!look_for_label || !rz_vendor_label(tgt, label, ior)) {
if (look_for_label) {
printf("%s rz%d, %s\n",
"WARNING: No valid disk label on",
tgt->unit_no,
"using defaults");
}
/* Validate partitions a and c for initialization */
tgt->dev_info.disk.l.d_partitions[0].p_offset = 0;
tgt->dev_info.disk.l.d_partitions[0].p_size = disk_size;
tgt->dev_info.disk.l.d_partitions[2].p_offset = 0;
tgt->dev_info.disk.l.d_partitions[2].p_size = disk_size;
tgt->dev_info.disk.l.d_partitions[MAXPARTITIONS].p_offset = 0;
tgt->dev_info.disk.l.d_partitions[MAXPARTITIONS].p_size = -1;
}
label->d_checksum = 0;
label->d_checksum = dkcksum(label);
}
ret = SCSI_RET_SUCCESS;
done:
if (rdata)
kfree((vm_offset_t) rdata, 2 * tgt->block_size);
io_req_free(ior);
return ret;
}
static void *Worker( void *arg ) {
TYPE id = (size_t)arg;
uint64_t entry;
int other = inv( id ); // int is better than TYPE
#ifdef FAST
unsigned int cnt = 0, oid = id;
#endif // FAST
for ( int r = 0; r < RUNS; r += 1 ) {
entry = 0;
while ( stop == 0 ) {
for ( ;; ) {
#ifdef FLICKER
for ( int i = 0; i < 100; i += 1 ) intents[id] = i % 2; // flicker
#endif // FLICKER
intents[id] = WantIn; // declare intent
// Necessary to prevent the read of intents[other] from floating above the assignment
// intents[id] = WantIn, when the hardware determines the two subscripts are different.
Fence(); // force store before more loads
if ( FASTPATH( intents[other] == DontWantIn ) ) break;
if ( last == id ) {
#ifdef FLICKER
for ( int i = 0; i < 100; i += 1 ) intents[id] = i % 2; // flicker
#endif // FLICKER
intents[id] = DontWantIn;
// Optional fence to prevent LD of "last" from being lifted above store of
// intends[id]=DontWantIn. Because a thread only writes its own id into "last",
// and because of eventual consistency (writes eventually become visible),
// the fence is conservative.
//Fence(); // force store before more loads
await( last != id ); // low priority busy wait
} // if
} // for
CriticalSection( id );
#ifdef FLICKER
for ( int i = id; i < 100; i += 1 ) last = i % 2; // flicker
#endif // FLICKER
last = id; // exit protocol
#ifdef FLICKER
for ( int i = 0; i < 100; i += 1 ) intents[id] = i % 2; // flicker
#endif // FLICKER
intents[id] = DontWantIn;
#ifdef FAST
id = startpoint( cnt ); // different starting point each experiment
other = inv( id );
cnt = cycleUp( cnt, NoStartPoints );
#endif // FAST
entry += 1;
} // while
#ifdef FAST
id = oid;
other = inv( id );
#endif // FAST
entries[r][id] = entry;
__sync_fetch_and_add( &Arrived, 1 );
while ( stop != 0 ) Pause();
__sync_fetch_and_add( &Arrived, -1 );
} // for
return NULL;
} // Worker
int
oscmdwait(void*, char *buf, int n)
{
return await(buf, n);
}
static inline void blink(void) {
GPIO_SET(1 << PIN);
await(1000000);
GPIO_CLR(1 << PIN);
}
/// Same as await()
pubnub_res get() {
return await();
}
/// Just wait for the transaction to end, don't get the
/// outcome
void wait() /*const*/ {
await();
}
static int
sys(char *str)
{
char *s, *t;
char *argv[100], path[100];
char *inname, *outname;
int append = 0;
int wait_pid;
int argc;
if(debugflag)
fprintf(diagfile, "%s\n", str);
inname = NULL;
outname = NULL;
argv[0] = shellname;
argc = 1;
t = str;
while( isspace((int)*t) )
++t;
while(*t) {
if(*t == '<')
inname = t+1;
else if(*t == '>') {
if(t[1] == '>') {
append = YES;
outname = t+2;
} else {
append = NO;
outname = t+1;
}
} else
argv[argc++] = t;
while( !isspace((int)*t) && *t!='\0' )
++t;
if(*t) {
*t++ = '\0';
while( isspace((int)*t) )
++t;
}
}
if(argc == 1) /* no command */
return(-1);
argv[argc] = 0;
s = path;
t = "/usr/bin/";
while(*t)
*s++ = *t++;
for(t = argv[1] ; (*s++ = *t++) ; )
;
if((wait_pid = fork()) == 0) {
if(inname)
freopen(inname, "r", stdin);
if(outname)
freopen(outname, (append ? "a" : "w"), stdout);
enbint(SIG_DFL);
texec(path+9, argv); /* command */
texec(path+4, argv); /* /bin/command */
texec(path , argv); /* /usr/bin/command */
fatal1("Cannot load %s",path+9);
}
return( await(wait_pid) );
}
int main()
{
char const *msg;
enum pubnub_res res;
struct UserData user_data;
struct UserData user_data_2;
char const *chan = "hello_world";
pubnub_t *pbp = pubnub_alloc();
pubnub_t *pbp_2 = pubnub_alloc();
if (NULL == pbp) {
printf("Failed to allocate Pubnub context!\n");
return -1;
}
if (NULL == pbp_2) {
printf("Failed to allocate Pubnub context!\n");
return -1;
}
InitUserData(&user_data, pbp);
InitUserData(&user_data_2, pbp_2);
pubnub_init(pbp, "demo", "demo");
pubnub_register_callback(pbp, sample_callback, &user_data);
pubnub_init(pbp_2, "demo", "demo");
pubnub_register_callback(pbp_2, sample_callback, &user_data_2);
puts("-----------------------");
puts("Subscribing...");
puts("-----------------------");
/* First subscribe, to get the time token */
res = pubnub_subscribe(pbp, chan, NULL);
if (res != PNR_STARTED) {
printf("pubnub_subscribe() returned unexpected: %d\n", res);
pubnub_free(pbp);
pubnub_free(pbp_2);
return -1;
}
puts("Await subscribe");
res = await(&user_data);
if (res == PNR_STARTED) {
printf("await() returned unexpected: PNR_STARTED(%d)\n", res);
pubnub_free(pbp);
pubnub_free(pbp_2);
return -1;
}
if (PNR_OK == res) {
puts("Subscribed!");
}
else {
printf("Subscribing failed with code: %d\n", res);
}
/* The "real" subscribe, with the just acquired time token */
res = pubnub_subscribe(pbp, chan, NULL);
if (res != PNR_STARTED) {
printf("pubnub_subscribe() returned unexpected: %d\n", res);
pubnub_free(pbp);
pubnub_free(pbp_2);
return -1;
}
/* Don't do "full" await here, because we didn't publish anything yet! */
start_await(&user_data);
puts("-----------------------");
puts("Publishing...");
puts("-----------------------");
/* Since the subscribe is ongoing in the `pbp` context, we can't
publish on it, so we use a different context to publish
*/
res = pubnub_publish(pbp_2, chan, "\"Hello world from subscribe-publish callback sample!\"");
if (res != PNR_STARTED) {
printf("pubnub_publish() returned unexpected: %d\n", res);
pubnub_free(pbp);
pubnub_free(pbp_2);
return -1;
}
puts("Await publish");
res = await(&user_data_2);
if (res == PNR_STARTED) {
printf("await() returned unexpected: PNR_STARTED(%d)\n", res);
pubnub_free(pbp);
pubnub_free(pbp_2);
return -1;
}
if (PNR_OK == res) {
printf("Published! Response from Pubnub: %s\n", pubnub_last_publish_result(pbp_2));
}
else if (PNR_PUBLISH_FAILED == res) {
printf("Published failed on Pubnub, description: %s\n", pubnub_last_publish_result(pbp_2));
}
else {
printf("Publishing failed with code: %d\n", res);
}
/* Don't need `pbp_2` no more */
if (pubnub_free(pbp_2) != 0) {
printf("Failed to free the Pubnub context `pbp_2`\n");
}
/* Now we await the subscribe on `pbp` */
puts("Await subscribe");
res = end_await(&user_data);
if (res == PNR_STARTED) {
printf("await() returned unexpected: PNR_STARTED(%d)\n", res);
pubnub_free(pbp);
return -1;
}
if (PNR_OK == res) {
puts("Subscribed! Got messages:");
for (;;) {
msg = pubnub_get(pbp);
if (NULL == msg) {
break;
}
puts(msg);
}
}
else {
printf("Subscribing failed with code: %d\n", res);
}
/* We're done */
if (pubnub_free(pbp) != 0) {
printf("Failed to free the Pubnub context `pbp`\n");
}
puts("Pubnub subscribe-publish callback demo over.");
return 0;
}
/*
* Start/completion routine for disks
*/
void
scdisk_start(
target_info_t *tgt,
boolean_t done)
{
register io_req_t ior = tgt->ior;
#ifdef CHECKSUM
register unsigned secno;
#endif
register io_req_t rdone = NULL;
register unsigned part, secno;
scsi_ret_t ret;
if (ior == 0)
return;
if (tgt->flags & TGT_BBR_ACTIVE) {
scdisk_bbr_start(tgt, done);
return;
}
if (done) {
unsigned int xferred;
unsigned int max_dma_data;
max_dma_data = scsi_softc[(unsigned char)tgt->masterno]->max_dma_data;
/* see if we must retry */
if ((tgt->done == SCSI_RET_RETRY) &&
((ior->io_op & IO_INTERNAL) == 0)) {
if(tgt->dev_info.disk.b.retry_count++ == DISK_RETRIES) {
tgt->done = SCSI_RET_DEVICE_DOWN;
} else {
timeout((timeout_fcn_t)wakeup, tgt, hz);
await(tgt);
goto start;
}
}
/* got a bus reset ? pifff.. */
if ((tgt->done == (SCSI_RET_ABORTED|SCSI_RET_RETRY)) &&
((ior->io_op & IO_INTERNAL) == 0)) {
if (xferred = ior->io_residual) {
/*
* No special thing to do for
* chained IOs, should work as well
*/
ior->io_data -= xferred;
ior->io_count += xferred;
ior->io_recnum -= xferred / tgt->block_size;
ior->io_residual = 0;
}
goto start;
} else if ((tgt->cur_cmd == SCSI_CMD_REQUEST_SENSE) &&
(!rzpassthru(ior->io_unit))) {
/*
* Quickly check for errors: if anything goes wrong
* we do a request sense, see if that is what we did.
*/
scsi_sense_data_t *sns;
unsigned int blockno;
char *outcome;
ior->io_op = ior->io_temporary;
sns = (scsi_sense_data_t *)tgt->cmd_ptr;
if (sns->addr_valid)
blockno = sns->u.xtended.info0 << 24 |
sns->u.xtended.info1 << 16 |
sns->u.xtended.info2 << 8 |
sns->u.xtended.info3;
else {
part = rzpartition(ior->io_unit);
blockno = tgt->dev_info.disk.l.d_partitions[part].p_offset
* (tgt->dev_info.disk.l.d_secsize / tgt->block_size);
blockno += ior->io_recnum;
}
if ((blockno + btodb(ior->io_count + tgt->block_size - 1)
>= tgt->dev_info.disk.l.d_secperunit)) {
ior->io_error = D_INVALID_RECNUM;
ior->io_op |= IO_ERROR;
outcome = "Unrecoverable";
} else if (scsi_check_sense_data(tgt, sns)) {
ior->io_error = 0;
if ((tgt->done == SCSI_RET_RETRY) &&
((ior->io_op & IO_INTERNAL) == 0)) {
timeout((timeout_fcn_t)wakeup, tgt, hz);
await(tgt);
goto start;
}
outcome = "Recovered";
#if CHAINED_IOS
} else if (ior->io_op & IO_CHAINED) {
/*
* Since multiple IOs are chained, split them
* and restart prior to error handling
*/
simple_lock(&tgt->target_lock);
split_io_reqs(ior);
simple_unlock(&tgt->target_lock);
ior->io_residual = 0;
goto start;
#endif /* CHAINED_IOS */
} else {
outcome = "Unrecoverable";
ior->io_error = D_IO_ERROR;
ior->io_op |= IO_ERROR;
}
if ((tgt->flags & TGT_OPTIONAL_CMD) == 0) {
printf("%s Error, rz%d: %s%s%d\n", outcome,
tgt->target_id + (tgt->masterno * 8),
(ior->io_op & IO_READ) ? "Read" :
((ior->io_op & IO_INTERNAL) ? "(command)" : "Write"),
" disk error, phys block no. ", blockno);
scsi_print_sense_data(sns); printf("\n");
#ifndef POWERMAC
/*
* On fatal read/write errors try replacing the
* bad block. The bbr routine will return TRUE
* iff it took control over the target for all
* subsequent operations. In this event, the
* queue of requests is effectively frozen.
*/
if (ior->io_error &&
((sns->error_class == SCSI_SNS_XTENDED_SENSE_DATA) &&
((sns->u.xtended.sense_key == SCSI_SNS_HW_ERR) ||
(sns->u.xtended.sense_key == SCSI_SNS_MEDIUM_ERR))) &&
scdisk_bad_block_repl(tgt, blockno))
return;
#endif
}
} else if ((tgt->done != SCSI_RET_SUCCESS) &&
#ifdef POWERMAC
(!rzpassthru(ior->io_unit) && (ior->io_op & IO_INTERNAL) == 0)) {
#else
!rzpassthru(ior->io_unit)) {
#endif
#if CHAINED_IOS
if (ior->io_op & IO_CHAINED) {
/*
* Since multiple IOs are chained, split them
* and restart prior to error handling
*/
simple_lock(&tgt->target_lock);
split_io_reqs(ior);
simple_unlock(&tgt->target_lock);
ior->io_residual = 0;
goto start;
}
#endif /* CHAINED_IOS */
/*
* See if we had errors
*/
if (tgt->done == SCSI_RET_NEED_SENSE) {
ior->io_temporary = ior->io_op;
ior->io_op = IO_INTERNAL;
scsi_request_sense(tgt, ior, 0);
return;
} else if (tgt->done == SCSI_RET_DEVICE_DOWN) {
part = rzpartition(ior->io_unit);
secno = ior->io_recnum;
secno += tgt->dev_info.disk.l.d_partitions[part].p_offset
* (tgt->dev_info.disk.l.d_secsize / tgt->block_size);
secno += btodb(ior->io_count + tgt->block_size - 1);
if (secno >= tgt->dev_info.disk.l.d_secperunit)
ior->io_error = D_INVALID_RECNUM;
else
ior->io_error = D_DEVICE_DOWN;
ior->io_op |= IO_ERROR;
} else {
printf("%s%x\n", "?rz_disk Disk error, ret=x", tgt->done);
ior->io_error = D_IO_ERROR;
ior->io_op |= IO_ERROR;
}
} else if (ior->io_count > (xferred = max_dma_data)) {
/*
* No errors.
* See if we requested more than the max
* (We use io_residual in a flip-side way here)
*/
#if CHAINED_IOS
if (ior->io_op & IO_CHAINED) {
/* Should not happen since we checked
max_data & max_segs before */
panic("chained io to large: 1");
}
#endif /* CHAINED_IOS */
ior->io_residual += xferred;
ior->io_count -= xferred;
ior->io_data += xferred;
ior->io_recnum += xferred / tgt->block_size;
goto start;
} else if (xferred = ior->io_residual) {
#if CHAINED_IOS
if (ior->io_op & IO_CHAINED) {
/* Should not happen since we checked
max_data & max_segs before */
panic("chained io to large: 2");
}
#endif /* CHAINED_IOS */
ior->io_data -= xferred;
ior->io_count += xferred;
ior->io_recnum -= xferred / tgt->block_size;
ior->io_residual = 0;
} /* that's it */
#ifdef CHECKSUM
if ((ior->io_op & IO_READ) && (ior->io_count < max_checksum_size)) {
part = rzpartition(ior->io_unit);
secno = ior->io_recnum
+ tgt->dev_info.disk.l.d_partitions[part].p_offset
* (tgt->dev_info.disk.l.d_secsize / tgt->block_size);
scdisk_bcheck(secno, ior->io_data, ior->io_count);
}
#endif /* CHECKSUM */
/* If this is a pass-through device, save the target result */
if (rzpassthru(ior->io_unit))
ior->io_error = tgt->done;
/* dequeue next one */
{
io_req_t next;
simple_lock(&tgt->target_lock);
next = ior->io_next;
tgt->ior = next;
simple_unlock(&tgt->target_lock);
if (next == 0) {
#if CHAINED_IOS
if (ior->io_op & IO_CHAINED)
chained_iodone(ior);
else
#endif /* CHAINED_IOS */
iodone(ior);
return;
}
rdone = ior;
ior = next;
}
#ifdef CHECKSUM
if (((ior->io_op & IO_READ) == 0) &&
(ior->io_count < max_checksum_size)) {
part = rzpartition(ior->io_unit);
secno = ior->io_recnum
+ tgt->dev_info.disk.l.d_partitions[part].p_offset
* (tgt->dev_info.disk.l.d_secsize / tgt->block_size);
scdisk_checksum(secno, ior->io_data, ior->io_count);
}
#endif /* CHECKSUM */
}
void
pxgstrf_mark_busy_descends(int pnum, int jcol, int *etree,
pxgstrf_shared_t *pxgstrf_shared,
int *bcol, int *lbusy)
{
/*
* -- SuperLU MT routine (version 1.0) --
* Univ. of California Berkeley, Xerox Palo Alto Research Center,
* and Lawrence Berkeley National Lab.
* August 15, 1997
*
* Purpose
* =======
*
* Mark busy panels in local "lbusy" array, used for linear pipelining.
*
* When jcol begins, its busy descendant panels (if any) are bcol and
* all the e-tree ancestors of bcol between bcol and jcol. This routine
* marks those columns in the array lbusy, which is local to this
* processor, to preserve a snapshot regardless of what the other
* processors are doing meanwhile.
*
* Arguments
* =========
*
* jcol (input) int
* Current panel, with leading column jcol.
*
* etree (input) int*
* Elimination tree parent pointers.
*
* bcol (input/output) int*
* Farthest busy descendant of jcol.
* On entry, it is the first column of the farthest busy panel.
* On exit, it may be adjusted to the first column of the
* farthest busy supernode.
*
* lbusy (input/output) int*
* Initially all -1, lbusy(r) = jcol means that r was busy
* at the beginning of computing jcol.
*
*/
GlobalLU_t *Glu = pxgstrf_shared->Glu;
register int w, kcol, fsupc, bcol_reg;
int *xsup;
bcol_reg = *bcol;
if ( bcol_reg < jcol ) {
/* -----------------------------------------------------------
Instead of waiting for the completion of "bcol", we can
pessimistically assume supno[bcol] == supno[bcol-1],
hence always mark as busy the supernode containing "bcol-1".
----------------------------------------------------------- */
if (pxgstrf_shared->pan_status[bcol_reg].type == RELAXED_SNODE) {
#if 0
if ( pxgstrf_shared->pan_status[bcol_reg].size < 0 )
fsupc = bcol_reg + pxgstrf_shared->pan_status[bcol_reg].size;
else fsupc = bcol_reg;
#endif
fsupc = bcol_reg;
w = pxgstrf_shared->pan_status[fsupc].size;
bcol_reg += w;
for (kcol = fsupc; kcol < bcol_reg; ++kcol)
lbusy[kcol] = jcol;
} else {
/* Find leading column "fsupc" in the supernode that
contains column "bcol-1" */
#if 0
if ( pxgstrf_shared->spin_locks[bcol_reg] ) /* WORSE PERFORMANCE!! */
await( &pxgstrf_shared->spin_locks[bcol_reg] );
#endif
xsup = Glu->xsup;
fsupc = SUPER_FSUPC ( Glu->supno[bcol_reg-1] );
for (kcol = fsupc; kcol < bcol_reg; ++kcol) lbusy[kcol] = jcol;
}
#if ( DEBUGlevel>=1 )
if (jcol >= LOCOL && jcol <= HICOL)
printf("(%d) mark_busy_descends[1] jcol %d, bcol_reg %d, fsupc %d\n",
pnum, jcol, bcol_reg, fsupc);
#endif
/* Mark as busy all columns on the path between bcol_reg and jcol */
for (kcol = bcol_reg; kcol < jcol; kcol = etree[kcol]) {
lbusy[kcol] = jcol;
}
/* INVARIANT: *bcol must be the first column of the farthest
busy supernode */
*bcol = fsupc;
} /* if bcol_reg < jcol */
}
void tree_barrier_await(tree_barrier_t *b, int id, bool *threadSense){
int me = id;
node_t *myLeaf = b->leaf[me / b->radix];
await(b, myLeaf, threadSense);
}
int main(int argc, char **argv) {
char *options, *path;
int fd, inotify, option, pwd, waitargs;
pid_t pid;
time_t started;
struct sigaction action;
progname = argv[0];
/* Redirect stdin from /dev/null. */
if ((fd = open("/dev/null", O_RDWR)) < 0)
error(EXIT_FAILURE, errno, "open /dev/null");
if (fd != STDIN_FILENO)
if ((dup2(fd, STDIN_FILENO)) < 0)
error(EXIT_FAILURE, errno, "dup2");
/* Redirect stdout and/or stderr to /dev/null if closed. */
while (fd <= STDERR_FILENO)
if ((fd = dup(fd)) < 0)
error(EXIT_FAILURE, errno, "dup");
close(fd);
/* Close all file descriptors apart from stdin, stdout and stderr. */
fd = getdtablesize() - 1;
while (fd > STDERR_FILENO)
close(fd--);
options = "+:cfl:p:ru:w:", waitargs = 0;
while ((option = getopt(argc, argv, options)) > 0)
switch (option) {
case 'c':
command.chdir = 1;
break;
case 'f':
/* On by default; ignored for compatibility with BSD daemon(1). */
break;
case 'l':
logger_setup(optarg);
break;
case 'p':
pidfile_open(optarg);
break;
case 'r':
command.restart = 1;
break;
case 'u':
user_setup(optarg);
break;
case 'w':
waitargs++;
break;
default:
usage(argv[0]);
}
if (argc <= optind)
usage(argv[0]);
switch (fork()) {
case -1:
error(EXIT_FAILURE, errno, "fork");
case 0:
setsid(); /* This should work after forking; ignore errors anyway. */
break;
default:
_exit(EXIT_SUCCESS); /* Don't delete pidfile in atexit() handler. */
}
logger_start();
pidfile_write();
/* We can handle all -w command line arguments now we're daemonized. */
if (waitargs > 0) {
if ((inotify = inotify_init1(IN_CLOEXEC)) < 0)
error(EXIT_FAILURE, errno, "inotify_init1");
/* Open the working directory so we can restore it after each await(). */
if ((pwd = open(".", O_RDONLY | O_DIRECTORY)) < 0)
error(EXIT_FAILURE, errno, "open pwd");
optind = 0; /* Need to reset optind to reprocess arguments. */
while ((option = getopt(argc, argv, options)) > 0)
if (option == 'w') {
if (!(path = strdup(optarg)))
error(EXIT_FAILURE, errno, "strdup");
await(path, inotify, 0);
free(path);
fchdir(pwd);
}
close(inotify);
close(pwd);
}
if (command.chdir && chdir("/") < 0)
error(EXIT_FAILURE, errno, "chdir");
command.argv = argv + optind;
if (!command.restart && !pidfile.path) {
/* We don't need to supervise in this case, so just exec. */
if (command.gid > 0 && setgid(command.gid) < 0)
error(EXIT_FAILURE, errno, "setgid");
if (command.uid > 0 && setuid(command.uid) < 0)
error(EXIT_FAILURE, errno, "setuid");
execvp(command.argv[0], command.argv);
error(EXIT_FAILURE, errno, "exec");
}
/* Handle and pass on HUP, INT, TERM, USR1, USR2 signals. */
sigfillset(&action.sa_mask);
action.sa_flags = SA_RESTART;
action.sa_handler = handler;
sigaction(SIGHUP, &action, NULL);
sigaction(SIGINT, &action, NULL);
sigaction(SIGTERM, &action, NULL);
sigaction(SIGUSR1, &action, NULL);
sigaction(SIGUSR2, &action, NULL);
do {
command.killed = 0; /* Have we signalled the child? */
switch (command.pid = fork()) {
case -1:
error(EXIT_FAILURE, errno, "fork");
case 0:
if (command.gid > 0 && setgid(command.gid) < 0)
error(EXIT_FAILURE, errno, "setgid");
if (command.uid > 0 && setuid(command.uid) < 0)
error(EXIT_FAILURE, errno, "setuid");
setsid(); /* This should work after forking; ignore errors anyway. */
execvp(command.argv[0], command.argv);
error(EXIT_FAILURE, errno, "exec");
}
started = time(NULL);
while (pid = wait(NULL), pid != (pid_t) command.pid)
if (pid < 0 && errno != EINTR)
error(EXIT_FAILURE, errno, "wait");
/* Try to avoid restarting a crashing command in a tight loop. */
if (command.restart && !command.killed && time(NULL) < started + 5)
error(EXIT_FAILURE, 0, "Child died within 5 seconds: not restarting");
} while (command.restart);
return EXIT_SUCCESS;
}
static Future<string> launch(
const string& path,
const vector<string>& argv)
{
Try<Subprocess> s = subprocess(
path,
argv,
Subprocess::PATH("/dev/null"),
Subprocess::PIPE(),
Subprocess::PIPE());
string command = strings::join(
", ",
path,
strings::join(", ", argv));
if (s.isError()) {
return Failure(
"Failed to execute the subprocess '" + command + "': " + s.error());
}
return await(
s.get().status(),
process::io::read(s.get().out().get()),
process::io::read(s.get().err().get()))
.then([command](const tuple<
Future<Option<int>>,
Future<string>,
Future<string>>& t) -> Future<string> {
Future<Option<int>> status = std::get<0>(t);
if (!status.isReady()) {
return Failure(
"Failed to get the exit status of the subprocess: " +
(status.isFailed() ? status.failure() : "discarded"));
}
if (status->isNone()) {
return Failure("Failed to reap the subprocess");
}
if (status->get() != 0) {
Future<string> error = std::get<2>(t);
if (!error.isReady()) {
return Failure(
"Unexpected result from the subprocess: " +
WSTRINGIFY(status->get()) + ", stderr='" +
error.get() + "'");
}
return Failure("Subprocess '" + command + "' failed: " + error.get());
}
Future<string> output = std::get<1>(t);
if (!output.isReady()) {
return Failure(
"Failed to read stdout from '" + command + "': " +
(output.isFailed() ? output.failure() : "discarded"));
}
return output;
});
}
