void bli_trmm_lu_blk_var1( obj_t* alpha,
obj_t* a,
obj_t* b,
obj_t* beta,
obj_t* c,
trmm_t* cntl )
{
obj_t a1, a1_pack;
obj_t b_pack;
obj_t c1, c1_pack;
dim_t i;
dim_t b_alg;
dim_t mT_trans;
// Initialize all pack objects that are passed into packm_init().
bli_obj_init_pack( &a1_pack );
bli_obj_init_pack( &b_pack );
bli_obj_init_pack( &c1_pack );
// If A is [upper] triangular, use the diagonal offset of A to determine
// the length of the non-zero region.
if ( bli_obj_is_triangular( *a ) )
mT_trans = bli_abs( bli_obj_diag_offset_after_trans( *a ) ) +
bli_obj_width_after_trans( *a );
else // if ( bli_obj_is_general( *a )
mT_trans = bli_obj_length_after_trans( *a );
// Scale C by beta (if instructed).
bli_scalm_int( beta,
c,
cntl_sub_scalm( cntl ) );
// Initialize object for packing B.
bli_packm_init( b, &b_pack,
cntl_sub_packm_b( cntl ) );
// Pack B and scale by alpha (if instructed).
bli_packm_int( alpha,
b, &b_pack,
cntl_sub_packm_b( cntl ) );
// Partition along the m dimension.
for ( i = 0; i < mT_trans; i += b_alg )
{
// Determine the current algorithmic blocksize.
b_alg = bli_determine_blocksize_f( i, mT_trans, a,
cntl_blocksize( cntl ) );
// Acquire partitions for A1 and C1.
bli_acquire_mpart_t2b( BLIS_SUBPART1,
i, b_alg, a, &a1 );
bli_acquire_mpart_t2b( BLIS_SUBPART1,
i, b_alg, c, &c1 );
// Initialize objects for packing A1 and C1.
bli_packm_init( &a1, &a1_pack,
cntl_sub_packm_a( cntl ) );
bli_packm_init( &c1, &c1_pack,
cntl_sub_packm_c( cntl ) );
// Pack A1 and scale by alpha (if instructed).
bli_packm_int( alpha,
&a1, &a1_pack,
cntl_sub_packm_a( cntl ) );
// Pack C1 and scale by beta (if instructed).
bli_packm_int( beta,
&c1, &c1_pack,
cntl_sub_packm_c( cntl ) );
// Perform trmm subproblem.
bli_trmm_int( BLIS_LEFT,
alpha,
&a1_pack,
&b_pack,
beta,
&c1_pack,
cntl_sub_trmm( cntl ) );
// Unpack C1 (if C1 was packed).
bli_unpackm_int( &c1_pack, &c1,
cntl_sub_unpackm_c( cntl ) );
}
// If any packing buffers were acquired within packm, release them back
// to the memory manager.
bli_obj_release_pack( &a1_pack );
bli_obj_release_pack( &b_pack );
bli_obj_release_pack( &c1_pack );
}
void bli_gemm_blk_var3f( obj_t* a,
obj_t* b,
obj_t* c,
gemm_t* cntl )
{
obj_t a1, a1_pack;
obj_t b1, b1_pack;
obj_t c_pack;
dim_t i;
dim_t b_alg;
dim_t k_trans;
// Initialize all pack objects that are passed into packm_init().
bli_obj_init_pack( &a1_pack );
bli_obj_init_pack( &b1_pack );
bli_obj_init_pack( &c_pack );
// Query dimension in partitioning direction.
k_trans = bli_obj_width_after_trans( *a );
// Scale C by beta (if instructed).
bli_scalm_int( &BLIS_ONE,
c,
cntl_sub_scalm( cntl ) );
// Initialize object for packing C.
bli_packm_init( c, &c_pack,
cntl_sub_packm_c( cntl ) );
// Pack C (if instructed).
bli_packm_int( c, &c_pack,
cntl_sub_packm_c( cntl ) );
// Partition along the k dimension.
for ( i = 0; i < k_trans; i += b_alg )
{
// Determine the current algorithmic blocksize.
// NOTE: Use of b (for execution datatype) is intentional!
// This causes the right blocksize to be used if c and a are
// complex and b is real.
b_alg = bli_determine_blocksize_f( i, k_trans, b,
cntl_blocksize( cntl ) );
// Acquire partitions for A1 and B1.
bli_acquire_mpart_l2r( BLIS_SUBPART1,
i, b_alg, a, &a1 );
bli_acquire_mpart_t2b( BLIS_SUBPART1,
i, b_alg, b, &b1 );
// Initialize objects for packing A1 and B1.
bli_packm_init( &a1, &a1_pack,
cntl_sub_packm_a( cntl ) );
bli_packm_init( &b1, &b1_pack,
cntl_sub_packm_b( cntl ) );
// Pack A1 (if instructed).
bli_packm_int( &a1, &a1_pack,
cntl_sub_packm_a( cntl ) );
// Pack B1 (if instructed).
bli_packm_int( &b1, &b1_pack,
cntl_sub_packm_b( cntl ) );
// Perform gemm subproblem.
bli_gemm_int( &BLIS_ONE,
&a1_pack,
&b1_pack,
&BLIS_ONE,
&c_pack,
cntl_sub_gemm( cntl ) );
// This variant executes multiple rank-k updates. Therefore, if the
// internal beta scalar on matrix C is non-zero, we must use it
// only for the first iteration (and then BLIS_ONE for all others).
// And since c_pack is a local obj_t, we can simply overwrite the
// internal beta scalar with BLIS_ONE once it has been used in the
// first iteration.
if ( i == 0 ) bli_obj_scalar_reset( &c_pack );
}
// Unpack C (if C was packed).
bli_unpackm_int( &c_pack, c,
cntl_sub_unpackm_c( cntl ) );
// If any packing buffers were acquired within packm, release them back
// to the memory manager.
bli_obj_release_pack( &a1_pack );
bli_obj_release_pack( &b1_pack );
bli_obj_release_pack( &c_pack );
}
void bli_ger_blk_var2( obj_t* alpha,
obj_t* x,
obj_t* y,
obj_t* a,
cntx_t* cntx,
ger_t* cntl )
{
obj_t a1, a1_pack;
obj_t y1, y1_pack;
dim_t i;
dim_t b_alg;
dim_t n_trans;
// Initialize objects for packing.
bli_obj_init_pack( &a1_pack );
bli_obj_init_pack( &y1_pack );
// Query dimension in partitioning direction.
n_trans = bli_obj_width_after_trans( *a );
// Partition along the n dimension.
for ( i = 0; i < n_trans; i += b_alg )
{
// Determine the current algorithmic blocksize.
b_alg = bli_determine_blocksize_f( i, n_trans, a,
bli_cntl_bszid( cntl ), cntx );
// Acquire partitions for A1 and y1.
bli_acquire_mpart_l2r( BLIS_SUBPART1,
i, b_alg, a, &a1 );
bli_acquire_vpart_f2b( BLIS_SUBPART1,
i, b_alg, y, &y1 );
// Initialize objects for packing A1 and y1 (if needed).
bli_packm_init( &a1, &a1_pack,
cntx, bli_cntl_sub_packm_a( cntl ) );
bli_packv_init( &y1, &y1_pack,
cntx, bli_cntl_sub_packv_y( cntl ) );
// Copy/pack A1, y1 (if needed).
bli_packm_int( &a1, &a1_pack,
cntx, bli_cntl_sub_packm_a( cntl ),
&BLIS_PACKM_SINGLE_THREADED );
bli_packv_int( &y1, &y1_pack,
cntx, bli_cntl_sub_packv_y( cntl ) );
// A1 = A1 + alpha * x * y1;
bli_ger_int( BLIS_NO_CONJUGATE,
BLIS_NO_CONJUGATE,
alpha,
x,
&y1_pack,
&a1_pack,
cntx,
bli_cntl_sub_ger( cntl ) );
// Copy/unpack A1 (if A1 was packed).
bli_unpackm_int( &a1_pack, &a1,
cntx, bli_cntl_sub_unpackm_a( cntl ),
&BLIS_PACKM_SINGLE_THREADED );
}
// If any packing buffers were acquired within packm, release them back
// to the memory manager.
bli_packm_release( &a1_pack, bli_cntl_sub_packm_a( cntl ) );
bli_packv_release( &y1_pack, bli_cntl_sub_packv_y( cntl ) );
}
void bli_trsm_blk_var3b( obj_t* a,
obj_t* b,
obj_t* c,
trsm_t* cntl,
trsm_thrinfo_t* thread )
{
obj_t c_pack_s;
obj_t a1_pack_s, b1_pack_s;
obj_t a1, b1;
obj_t* a1_pack = NULL;
obj_t* b1_pack = NULL;
obj_t* c_pack = NULL;
dim_t i;
dim_t b_alg;
dim_t k_trans;
// Prune any zero region that exists along the partitioning dimension.
bli_trsm_prune_unref_mparts_k( a, b, c );
// Initialize pack objects for C that are passed into packm_init().
if( thread_am_ochief( thread ) ) {
bli_obj_init_pack( &c_pack_s );
// Initialize object for packing C.
bli_packm_init( c, &c_pack_s,
cntl_sub_packm_c( cntl ) );
// Scale C by beta (if instructed).
bli_scalm_int( &BLIS_ONE,
c,
cntl_sub_scalm( cntl ) );
}
c_pack = thread_obroadcast( thread, &c_pack_s );
if( thread_am_ichief( thread ) ) {
bli_obj_init_pack( &a1_pack_s );
bli_obj_init_pack( &b1_pack_s );
}
a1_pack = thread_ibroadcast( thread, &a1_pack_s );
b1_pack = thread_ibroadcast( thread, &b1_pack_s );
// Pack C (if instructed).
bli_packm_int( c, c_pack,
cntl_sub_packm_c( cntl ),
trsm_thread_sub_opackm( thread ) );
// Query dimension in partitioning direction.
k_trans = bli_obj_width_after_trans( *a );
// Partition along the k dimension.
for ( i = 0; i < k_trans; i += b_alg )
{
// Determine the current algorithmic blocksize.
// NOTE: We call a trsm-specific function to determine the kc
// blocksize so that we can implement the "nudging" of kc to be
// a multiple of mr, as needed.
b_alg = bli_trsm_determine_kc_b( i, k_trans, b,
cntl_blocksize( cntl ) );
// Acquire partitions for A1 and B1.
bli_acquire_mpart_r2l( BLIS_SUBPART1,
i, b_alg, a, &a1 );
bli_acquire_mpart_b2t( BLIS_SUBPART1,
i, b_alg, b, &b1 );
// Initialize objects for packing A1 and B1.
if( thread_am_ichief( thread ) ) {
bli_packm_init( &a1, a1_pack,
cntl_sub_packm_a( cntl ) );
bli_packm_init( &b1, b1_pack,
cntl_sub_packm_b( cntl ) );
}
thread_ibarrier( thread );
// Pack A1 (if instructed).
bli_packm_int( &a1, a1_pack,
cntl_sub_packm_a( cntl ),
trsm_thread_sub_ipackm( thread ) );
// Pack B1 (if instructed).
bli_packm_int( &b1, b1_pack,
cntl_sub_packm_b( cntl ),
trsm_thread_sub_ipackm( thread ) );
// Perform trsm subproblem.
bli_trsm_int( &BLIS_ONE,
a1_pack,
b1_pack,
&BLIS_ONE,
c_pack,
cntl_sub_trsm( cntl ),
trsm_thread_sub_trsm( thread ) );
// This variant executes multiple rank-k updates. Therefore, if the
// internal alpha scalars on A/B and C are non-zero, we must ensure
// that they are only used in the first iteration.
thread_ibarrier( thread );
if ( i == 0 && thread_am_ichief( thread ) ) {
bli_obj_scalar_reset( a );
bli_obj_scalar_reset( b );
bli_obj_scalar_reset( c_pack );
}
}
thread_obarrier( thread );
// Unpack C (if C was packed).
bli_unpackm_int( c_pack, c,
cntl_sub_unpackm_c( cntl ),
trsm_thread_sub_opackm( thread ) );
// If any packing buffers were acquired within packm, release them back
// to the memory manager.
if( thread_am_ochief( thread ) ) {
bli_packm_release( c_pack, cntl_sub_packm_c( cntl ) );
}
if( thread_am_ichief( thread ) ) {
bli_packm_release( a1_pack, cntl_sub_packm_a( cntl ) );
bli_packm_release( b1_pack, cntl_sub_packm_b( cntl ) );
}
}
void bli_trmm_blk_var2f( obj_t* a,
obj_t* b,
obj_t* c,
trmm_t* cntl )
{
obj_t a_pack;
obj_t b1, b1_pack;
obj_t c1, c1_pack;
dim_t i;
dim_t b_alg;
dim_t n_trans;
// Initialize all pack objects that are passed into packm_init().
bli_obj_init_pack( &a_pack );
bli_obj_init_pack( &b1_pack );
bli_obj_init_pack( &c1_pack );
// Query dimension in partitioning direction.
n_trans = bli_obj_width_after_trans( *b );
// Scale C by beta (if instructed).
bli_scalm_int( &BLIS_ONE,
c,
cntl_sub_scalm( cntl ) );
// Initialize object for packing A.
bli_packm_init( a, &a_pack,
cntl_sub_packm_a( cntl ) );
// Pack A (if instructed).
bli_packm_int( a, &a_pack,
cntl_sub_packm_a( cntl ) );
// Partition along the n dimension.
for ( i = 0; i < n_trans; i += b_alg )
{
// Determine the current algorithmic blocksize.
b_alg = bli_determine_blocksize_f( i, n_trans, b,
cntl_blocksize( cntl ) );
// Acquire partitions for B1 and C1.
bli_acquire_mpart_l2r( BLIS_SUBPART1,
i, b_alg, b, &b1 );
bli_acquire_mpart_l2r( BLIS_SUBPART1,
i, b_alg, c, &c1 );
// Initialize objects for packing A1 and B1.
bli_packm_init( &b1, &b1_pack,
cntl_sub_packm_b( cntl ) );
bli_packm_init( &c1, &c1_pack,
cntl_sub_packm_c( cntl ) );
// Pack B1 (if instructed).
bli_packm_int( &b1, &b1_pack,
cntl_sub_packm_b( cntl ) );
// Pack C1 (if instructed).
bli_packm_int( &c1, &c1_pack,
cntl_sub_packm_c( cntl ) );
// Perform trmm subproblem.
bli_trmm_int( &BLIS_ONE,
&a_pack,
&b1_pack,
&BLIS_ONE,
&c1_pack,
cntl_sub_trmm( cntl ) );
// Unpack C1 (if C1 was packed).
bli_unpackm_int( &c1_pack, &c1,
cntl_sub_unpackm_c( cntl ) );
}
// If any packing buffers were acquired within packm, release them back
// to the memory manager.
bli_obj_release_pack( &a_pack );
bli_obj_release_pack( &b1_pack );
bli_obj_release_pack( &c1_pack );
}
void bli_trsm_blk_var1b( obj_t* a,
obj_t* b,
obj_t* c,
trsm_t* cntl,
trsm_thrinfo_t* thread )
{
obj_t b_pack_s;
obj_t a1_pack_s;
obj_t a1, c1;
obj_t* b_pack = NULL;
obj_t* a1_pack = NULL;
dim_t i;
dim_t b_alg;
// Prune any zero region that exists along the partitioning dimension.
bli_trsm_prune_unref_mparts_m( a, b, c );
// Initialize object for packing B.
if( thread_am_ochief( thread ) ) {
bli_obj_init_pack( &b_pack_s );
bli_packm_init( b, &b_pack_s,
cntl_sub_packm_b( cntl ) );
}
b_pack = thread_obroadcast( thread, &b_pack_s );
// Initialize object for packing B.
if( thread_am_ichief( thread ) ) {
bli_obj_init_pack( &a1_pack_s );
}
a1_pack = thread_ibroadcast( thread, &a1_pack_s );
// Pack B1 (if instructed).
bli_packm_int( b, b_pack,
cntl_sub_packm_b( cntl ),
trsm_thread_sub_opackm( thread ) );
dim_t my_start, my_end;
num_t dt = bli_obj_execution_datatype( *a );
dim_t bf = ( bli_obj_root_is_triangular( *a ) ?
bli_info_get_default_mr( BLIS_TRSM, dt ) :
bli_info_get_default_nr( BLIS_TRSM, dt ) );
bli_get_range_b2t( thread, a, bf,
&my_start, &my_end );
// Partition along the remaining portion of the m dimension.
for ( i = my_start; i < my_end; i += b_alg )
{
// Determine the current algorithmic blocksize.
b_alg = bli_determine_blocksize_b( i, my_end, a,
cntl_blocksize( cntl ) );
// Acquire partitions for A1 and C1.
bli_acquire_mpart_b2t( BLIS_SUBPART1,
i, b_alg, a, &a1 );
bli_acquire_mpart_b2t( BLIS_SUBPART1,
i, b_alg, c, &c1 );
// Initialize object for packing A1.
if( thread_am_ichief( thread ) ) {
bli_packm_init( &a1, a1_pack,
cntl_sub_packm_a( cntl ) );
}
thread_ibarrier( thread );
// Pack A1 (if instructed).
bli_packm_int( &a1, a1_pack,
cntl_sub_packm_a( cntl ),
trsm_thread_sub_ipackm( thread ) );
// Perform trsm subproblem.
bli_trsm_int( &BLIS_ONE,
a1_pack,
b_pack,
&BLIS_ONE,
&c1,
cntl_sub_trsm( cntl ),
trsm_thread_sub_trsm( thread ) );
thread_ibarrier( thread );
}
// If any packing buffers were acquired within packm, release them back
// to the memory manager.
thread_obarrier( thread );
if( thread_am_ochief( thread ) )
bli_packm_release( b_pack, cntl_sub_packm_b( cntl ) );
if( thread_am_ichief( thread ) )
bli_packm_release( a1_pack, cntl_sub_packm_a( cntl ) );
}
void bli_gemm_blk_var1f( obj_t* a,
obj_t* b,
obj_t* c,
cntx_t* cntx,
gemm_t* cntl,
gemm_thrinfo_t* thread )
{
//The s is for "lives on the stack"
obj_t b_pack_s;
obj_t a1_pack_s, c1_pack_s;
obj_t a1, c1;
obj_t* a1_pack = NULL;
obj_t* b_pack = NULL;
obj_t* c1_pack = NULL;
dim_t i;
dim_t b_alg;
if( thread_am_ochief( thread ) ) {
// Initialize object for packing B.
bli_obj_init_pack( &b_pack_s );
bli_packm_init( b, &b_pack_s,
cntx, cntl_sub_packm_b( cntl ) );
// Scale C by beta (if instructed).
// Since scalm doesn't support multithreading yet, must be done by chief thread (ew)
bli_scalm_int( &BLIS_ONE,
c,
cntx, cntl_sub_scalm( cntl ) );
}
b_pack = thread_obroadcast( thread, &b_pack_s );
// Initialize objects passed into bli_packm_init for A and C
if( thread_am_ichief( thread ) ) {
bli_obj_init_pack( &a1_pack_s );
bli_obj_init_pack( &c1_pack_s );
}
a1_pack = thread_ibroadcast( thread, &a1_pack_s );
c1_pack = thread_ibroadcast( thread, &c1_pack_s );
// Pack B (if instructed).
bli_packm_int( b, b_pack,
cntx, cntl_sub_packm_b( cntl ),
gemm_thread_sub_opackm( thread ) );
dim_t my_start, my_end;
bli_get_range_t2b( thread, a,
bli_cntx_get_bmult( cntl_bszid( cntl ), cntx ),
&my_start, &my_end );
// Partition along the m dimension.
for ( i = my_start; i < my_end; i += b_alg )
{
// Determine the current algorithmic blocksize.
// NOTE: Use of a (for execution datatype) is intentional!
// This causes the right blocksize to be used if c and a are
// complex and b is real.
b_alg = bli_determine_blocksize_f( i, my_end, a,
cntl_bszid( cntl ), cntx );
// Acquire partitions for A1 and C1.
bli_acquire_mpart_t2b( BLIS_SUBPART1,
i, b_alg, a, &a1 );
bli_acquire_mpart_t2b( BLIS_SUBPART1,
i, b_alg, c, &c1 );
// Initialize objects for packing A1 and C1.
if( thread_am_ichief( thread ) ) {
bli_packm_init( &a1, a1_pack,
cntx, cntl_sub_packm_a( cntl ) );
bli_packm_init( &c1, c1_pack,
cntx, cntl_sub_packm_c( cntl ) );
}
thread_ibarrier( thread );
// Pack A1 (if instructed).
bli_packm_int( &a1, a1_pack,
cntx, cntl_sub_packm_a( cntl ),
gemm_thread_sub_ipackm( thread ) );
// Pack C1 (if instructed).
bli_packm_int( &c1, c1_pack,
cntx, cntl_sub_packm_c( cntl ),
gemm_thread_sub_ipackm( thread ) );
// Perform gemm subproblem.
bli_gemm_int( &BLIS_ONE,
a1_pack,
b_pack,
&BLIS_ONE,
c1_pack,
cntx,
cntl_sub_gemm( cntl ),
gemm_thread_sub_gemm( thread ) );
thread_ibarrier( thread );
// Unpack C1 (if C1 was packed).
// Currently must be done by 1 thread
bli_unpackm_int( c1_pack, &c1,
cntx, cntl_sub_unpackm_c( cntl ),
gemm_thread_sub_ipackm( thread ) );
}
// If any packing buffers were acquired within packm, release them back
// to the memory manager.
thread_obarrier( thread );
if( thread_am_ochief( thread ) )
bli_packm_release( b_pack, cntl_sub_packm_b( cntl ) );
if( thread_am_ichief( thread ) ){
bli_packm_release( a1_pack, cntl_sub_packm_a( cntl ) );
bli_packm_release( c1_pack, cntl_sub_packm_c( cntl ) );
}
}
void bli_gemm_blk_var4f( obj_t* a,
obj_t* b,
obj_t* c,
gemm_t* cntl,
gemm_thrinfo_t* thread )
{
extern packm_t* gemm3mh_packa_cntl_ro;
extern packm_t* gemm3mh_packa_cntl_io;
extern packm_t* gemm3mh_packa_cntl_rpi;
packm_t* packa_cntl_ro = gemm3mh_packa_cntl_ro;
packm_t* packa_cntl_io = gemm3mh_packa_cntl_io;
packm_t* packa_cntl_rpi = gemm3mh_packa_cntl_rpi;
//The s is for "lives on the stack"
obj_t b_pack_s;
obj_t a1_pack_s, c1_pack_s;
obj_t a1, c1;
obj_t* a1_pack = NULL;
obj_t* b_pack = NULL;
obj_t* c1_pack = NULL;
dim_t i;
dim_t b_alg;
dim_t m_trans;
if( thread_am_ochief( thread ) ) {
// Initialize object for packing B.
bli_obj_init_pack( &b_pack_s );
bli_packm_init( b, &b_pack_s,
cntl_sub_packm_b( cntl ) );
// Scale C by beta (if instructed).
// Since scalm doesn't support multithreading yet, must be done by chief thread (ew)
bli_scalm_int( &BLIS_ONE,
c,
cntl_sub_scalm( cntl ) );
}
b_pack = thread_obroadcast( thread, &b_pack_s );
// Initialize objects passed into bli_packm_init for A and C
if( thread_am_ichief( thread ) ) {
bli_obj_init_pack( &a1_pack_s );
bli_obj_init_pack( &c1_pack_s );
}
a1_pack = thread_ibroadcast( thread, &a1_pack_s );
c1_pack = thread_ibroadcast( thread, &c1_pack_s );
// Pack B (if instructed).
bli_packm_int( b, b_pack,
cntl_sub_packm_b( cntl ),
gemm_thread_sub_opackm( thread ) );
// Query dimension in partitioning direction.
m_trans = bli_obj_length_after_trans( *a );
dim_t start, end;
bli_get_range_t2b( thread, 0, m_trans,
bli_blksz_get_mult_for_obj( a, cntl_blocksize( cntl ) ),
&start, &end );
// Partition along the m dimension.
for ( i = start; i < end; i += b_alg )
{
// Determine the current algorithmic blocksize.
// NOTE: Use of a (for execution datatype) is intentional!
// This causes the right blocksize to be used if c and a are
// complex and b is real.
b_alg = bli_determine_blocksize_f( i, end, a,
cntl_blocksize( cntl ) );
// Acquire partitions for A1 and C1.
bli_acquire_mpart_t2b( BLIS_SUBPART1,
i, b_alg, a, &a1 );
bli_acquire_mpart_t2b( BLIS_SUBPART1,
i, b_alg, c, &c1 );
// Initialize objects for packing A1 and C1.
if( thread_am_ichief( thread ) ) {
bli_packm_init( &a1, a1_pack,
packa_cntl_ro );
bli_packm_init( &c1, c1_pack,
cntl_sub_packm_c( cntl ) );
}
thread_ibarrier( thread );
// Pack A1 (if instructed).
bli_packm_int( &a1, a1_pack,
packa_cntl_ro,
gemm_thread_sub_ipackm( thread ) );
// Pack C1 (if instructed).
bli_packm_int( &c1, c1_pack,
cntl_sub_packm_c( cntl ),
gemm_thread_sub_ipackm( thread ) );
// Perform gemm subproblem.
bli_gemm_int( &BLIS_ONE,
a1_pack,
b_pack,
&BLIS_ONE,
c1_pack,
cntl_sub_gemm( cntl ),
gemm_thread_sub_gemm( thread ) );
thread_ibarrier( thread );
// Only apply beta within the first of three subproblems.
if ( thread_am_ichief( thread ) ) bli_obj_scalar_reset( c1_pack );
// Initialize objects for packing A1 and C1.
if( thread_am_ichief( thread ) ) {
bli_packm_init( &a1, a1_pack,
packa_cntl_io );
}
thread_ibarrier( thread );
// Pack A1 (if instructed).
bli_packm_int( &a1, a1_pack,
packa_cntl_io,
gemm_thread_sub_ipackm( thread ) );
// Perform gemm subproblem.
bli_gemm_int( &BLIS_ONE,
a1_pack,
b_pack,
&BLIS_ONE,
c1_pack,
cntl_sub_gemm( cntl ),
gemm_thread_sub_gemm( thread ) );
thread_ibarrier( thread );
// Initialize objects for packing A1 and C1.
if( thread_am_ichief( thread ) ) {
bli_packm_init( &a1, a1_pack,
packa_cntl_rpi );
}
thread_ibarrier( thread );
// Pack A1 (if instructed).
bli_packm_int( &a1, a1_pack,
packa_cntl_rpi,
gemm_thread_sub_ipackm( thread ) );
// Perform gemm subproblem.
bli_gemm_int( &BLIS_ONE,
a1_pack,
b_pack,
&BLIS_ONE,
c1_pack,
cntl_sub_gemm( cntl ),
gemm_thread_sub_gemm( thread ) );
thread_ibarrier( thread );
// Unpack C1 (if C1 was packed).
// Currently must be done by 1 thread
bli_unpackm_int( c1_pack, &c1,
cntl_sub_unpackm_c( cntl ),
gemm_thread_sub_ipackm( thread ) );
}
// If any packing buffers were acquired within packm, release them back
// to the memory manager.
thread_obarrier( thread );
if( thread_am_ochief( thread ) )
bli_packm_release( b_pack, cntl_sub_packm_b( cntl ) );
if( thread_am_ichief( thread ) ){
// It doesn't matter which packm cntl node we pass in, as long
// as it is valid, packm_release() will release the mem_t entry.
bli_packm_release( a1_pack, packa_cntl_ro );
bli_packm_release( c1_pack, cntl_sub_packm_c( cntl ) );
}
}
void bli_trmm_blk_var2b( obj_t* a,
obj_t* b,
obj_t* c,
cntx_t* cntx,
gemm_t* cntl,
trmm_thrinfo_t* thread )
{
obj_t a_pack_s;
obj_t b1_pack_s, c1_pack_s;
obj_t b1, c1;
obj_t* a_pack = NULL;
obj_t* b1_pack = NULL;
obj_t* c1_pack = NULL;
dim_t i;
dim_t b_alg;
// Prune any zero region that exists along the partitioning dimension.
bli_trmm_prune_unref_mparts_n( a, b, c );
if( thread_am_ochief( thread ) ) {
// Initialize object for packing A
bli_obj_init_pack( &a_pack_s );
bli_packm_init( a, &a_pack_s,
cntx, cntl_sub_packm_a( cntl ) );
// Scale C by beta (if instructed).
bli_scalm_int( &BLIS_ONE,
c,
cntx, cntl_sub_scalm( cntl ) );
}
a_pack = thread_obroadcast( thread, &a_pack_s );
// Initialize pack objects for B and C that are passed into packm_init().
if( thread_am_ichief( thread ) ) {
bli_obj_init_pack( &b1_pack_s );
bli_obj_init_pack( &c1_pack_s );
}
b1_pack = thread_ibroadcast( thread, &b1_pack_s );
c1_pack = thread_ibroadcast( thread, &c1_pack_s );
// Pack A (if instructed).
bli_packm_int( a, a_pack,
cntx, cntl_sub_packm_a( cntl ),
trmm_thread_sub_opackm( thread ) );
dim_t my_start, my_end;
bli_get_range_weighted_r2l( thread, b,
bli_cntx_get_bmult( cntl_bszid( cntl ), cntx ),
&my_start, &my_end );
// Partition along the n dimension.
for ( i = my_start; i < my_end; i += b_alg )
{
// Determine the current algorithmic blocksize.
b_alg = bli_determine_blocksize_b( i, my_end, b,
cntl_bszid( cntl ), cntx );
// Acquire partitions for B1 and C1.
bli_acquire_mpart_r2l( BLIS_SUBPART1,
i, b_alg, b, &b1 );
bli_acquire_mpart_r2l( BLIS_SUBPART1,
i, b_alg, c, &c1 );
// Initialize objects for packing A1 and B1.
if( thread_am_ichief( thread ) ) {
bli_packm_init( &b1, b1_pack,
cntx, cntl_sub_packm_b( cntl ) );
bli_packm_init( &c1, c1_pack,
cntx, cntl_sub_packm_c( cntl ) );
}
thread_ibarrier( thread );
// Pack B1 (if instructed).
bli_packm_int( &b1, b1_pack,
cntx, cntl_sub_packm_b( cntl ),
trmm_thread_sub_ipackm( thread ) );
// Pack C1 (if instructed).
bli_packm_int( &c1, c1_pack,
cntx, cntl_sub_packm_c( cntl ),
trmm_thread_sub_ipackm( thread ) );
// Perform trmm subproblem.
bli_trmm_int( &BLIS_ONE,
a_pack,
b1_pack,
&BLIS_ONE,
c1_pack,
cntx,
cntl_sub_gemm( cntl ),
trmm_thread_sub_trmm( thread ) );
thread_ibarrier( thread );
// Unpack C1 (if C1 was packed).
bli_unpackm_int( c1_pack, &c1,
cntx, cntl_sub_unpackm_c( cntl ),
trmm_thread_sub_ipackm( thread ) );
}
// If any packing buffers were acquired within packm, release them back
// to the memory manager.
thread_obarrier( thread );
if( thread_am_ochief( thread ) )
bli_packm_release( a_pack, cntl_sub_packm_a( cntl ) );
if( thread_am_ichief( thread ) ) {
bli_packm_release( b1_pack, cntl_sub_packm_b( cntl ) );
bli_packm_release( c1_pack, cntl_sub_packm_c( cntl ) );
}
}
void bli_trmm_blk_var3b( obj_t* a,
obj_t* b,
obj_t* c,
gemm_t* cntl,
trmm_thrinfo_t* thread )
{
obj_t c_pack_s;
obj_t a1_pack_s, b1_pack_s;
obj_t a1, b1;
obj_t* a1_pack = NULL;
obj_t* b1_pack = NULL;
obj_t* c_pack = NULL;
dim_t i;
dim_t b_alg;
dim_t k_trans;
if( thread_am_ochief( thread ) ){
// Initialize object for packing C
bli_obj_init_pack( &c_pack_s );
bli_packm_init( c, &c_pack_s,
cntl_sub_packm_c( cntl ) );
// Scale C by beta (if instructed).
bli_scalm_int( &BLIS_ONE,
c,
cntl_sub_scalm( cntl ) );
}
c_pack = thread_obroadcast( thread, &c_pack_s );
// Initialize pack objects for A and B that are passed into packm_init().
if( thread_am_ichief( thread ) ){
bli_obj_init_pack( &a1_pack_s );
bli_obj_init_pack( &b1_pack_s );
}
a1_pack = thread_ibroadcast( thread, &a1_pack_s );
b1_pack = thread_ibroadcast( thread, &b1_pack_s );
// Pack C (if instructed).
bli_packm_int( c, c_pack,
cntl_sub_packm_c( cntl ),
trmm_thread_sub_opackm( thread ) );
// Query dimension in partitioning direction.
k_trans = bli_obj_width_after_trans( *a );
// Partition along the k dimension.
for ( i = 0; i < k_trans; i += b_alg )
{
// Determine the current algorithmic blocksize.
// NOTE: We call a trmm-specific function to determine the kc
// blocksize so that we can implement the "nudging" of kc to be
// a multiple of mr or nr, as needed.
b_alg = bli_trmm_determine_kc_b( i, k_trans, a, b,
cntl_blocksize( cntl ) );
// Acquire partitions for A1 and B1.
bli_acquire_mpart_r2l( BLIS_SUBPART1,
i, b_alg, a, &a1 );
bli_acquire_mpart_b2t( BLIS_SUBPART1,
i, b_alg, b, &b1 );
// Initialize objects for packing A1 and B1.
if( thread_am_ichief( thread ) ) {
bli_packm_init( &a1, a1_pack,
cntl_sub_packm_a( cntl ) );
bli_packm_init( &b1, b1_pack,
cntl_sub_packm_b( cntl ) );
}
thread_ibarrier( thread );
// Pack A1 (if instructed).
bli_packm_int( &a1, a1_pack,
cntl_sub_packm_a( cntl ),
trmm_thread_sub_ipackm( thread ) );
// Pack B1 (if instructed).
bli_packm_int( &b1, b1_pack,
cntl_sub_packm_b( cntl ),
trmm_thread_sub_ipackm( thread ) );
// Perform trmm subproblem.
bli_trmm_int( &BLIS_ONE,
a1_pack,
b1_pack,
&BLIS_ONE,
c_pack,
cntl_sub_gemm( cntl ),
trmm_thread_sub_trmm( thread ) );
thread_ibarrier( thread );
}
thread_obarrier( thread );
// Unpack C (if C was packed).
bli_unpackm_int( c_pack, c,
cntl_sub_unpackm_c( cntl ),
trmm_thread_sub_opackm( thread ) );
// If any packing buffers were acquired within packm, release them back
// to the memory manager.
if( thread_am_ochief( thread ) ){
bli_packm_release( c_pack, cntl_sub_packm_c( cntl ) );
}
if( thread_am_ichief( thread ) ){
bli_packm_release( a1_pack, cntl_sub_packm_a( cntl ) );
bli_packm_release( b1_pack, cntl_sub_packm_b( cntl ) );
}
}
void bli_gemm_blk_var2( obj_t* alpha,
obj_t* a,
obj_t* b,
obj_t* beta,
obj_t* c,
gemm_t* cntl )
{
obj_t a_pack_s;
obj_t b1_pack_s;
obj_t c1_pack_s;
obj_t b1, c1;
obj_t* a_pack = NULL;
obj_t* b1_pack = NULL;
obj_t* c1_pack = NULL;
dim_t i;
dim_t b_alg;
dim_t n_trans;
dim_t num_groups = bli_gemm_num_thread_groups( cntl->thread_info );
dim_t group_id = bli_gemm_group_id( cntl->thread_info );
if( bli_gemm_am_a_master( cntl->thread_info ) ) {
// Initialize object for packing A.
bli_obj_init_pack( &a_pack_s );
bli_packm_init( a, &a_pack_s,
cntl_sub_packm_a( cntl ) );
}
a_pack = bli_gemm_broadcast_a( cntl->thread_info, &a_pack_s );
// Pack A and scale by alpha (if instructed).
bli_packm_int( alpha,
a, a_pack,
cntl_sub_packm_a( cntl ) );
bli_gemm_a_barrier( cntl->thread_info );
if( bli_gemm_am_b_master( cntl->thread_info )) {
bli_obj_init_pack( &b1_pack_s );
}
b1_pack = bli_gemm_broadcast_b( cntl->thread_info, &b1_pack_s );
if( bli_gemm_am_c_master( cntl->thread_info )) {
bli_obj_init_pack( &c1_pack_s );
// Scale C by beta (if instructed).
bli_scalm_int( beta,
c,
cntl_sub_scalm( cntl ) );
}
c1_pack = bli_gemm_broadcast_c( cntl->thread_info, &c1_pack_s );
// Query dimension in partitioning direction.
n_trans = bli_obj_width_after_trans( *b );
dim_t n_pt = n_trans / num_groups;
n_pt = (n_pt * num_groups < n_trans) ? n_pt + 1 : n_pt;
n_pt = (n_pt % 8 == 0) ? n_pt : n_pt + 8 - (n_pt % 8);
dim_t start = group_id * n_pt;
dim_t end = bli_min( start + n_pt, n_trans );
// Partition along the n dimension.
for ( i = start; i < end; i += b_alg )
{
// Determine the current algorithmic blocksize.
// NOTE: Use of b (for execution datatype) is intentional!
// This causes the right blocksize to be used if c and a are
// complex and b is real.
b_alg = bli_determine_blocksize_f( i, end, b,
cntl_blocksize( cntl ) );
// Acquire partitions for C1
bli_acquire_mpart_l2r( BLIS_SUBPART1,
i, b_alg, c, &c1 );
// Acquire partitions for B1
bli_acquire_mpart_l2r( BLIS_SUBPART1,
i, b_alg, b, &b1 );
if( bli_gemm_am_b_master( cntl->thread_info )) {
// Initialize objects for packing B1
bli_packm_init( &b1, &b1_pack_s,
cntl_sub_packm_b( cntl ) );
}
if( bli_gemm_am_c_master( cntl->thread_info )) {
// Initialize objects for packing C1
bli_packm_init( &c1, &c1_pack_s,
cntl_sub_packm_c( cntl ) );
}
bli_gemm_b_barrier( cntl->thread_info );
bli_gemm_c_barrier( cntl->thread_info );
// Pack B1 and scale by alpha (if instructed).
bli_packm_int( alpha,
&b1, b1_pack,
cntl_sub_packm_b( cntl ) );
// Pack C1 and scale by beta (if instructed).
bli_packm_int( beta,
&c1, c1_pack,
cntl_sub_packm_c( cntl ) );
// Packing must be done before computation
bli_gemm_b_barrier( cntl->thread_info );
bli_gemm_c_barrier( cntl->thread_info );
// Perform gemm subproblem.
bli_gemm_int( alpha,
a_pack,
b1_pack,
beta,
c1_pack,
cntl_sub_gemm( cntl ) );
// Unpack C1 (if C1 was packed).
bli_unpackm_int( c1_pack, &c1,
cntl_sub_unpackm_c( cntl ) );
}
// If any packing buffers were acquired within packm, release them back
// to the memory manager.
bli_gemm_a_barrier( cntl->thread_info );
if( bli_gemm_am_a_master( cntl->thread_info ))
bli_obj_release_pack( &a_pack_s );
bli_gemm_b_barrier( cntl->thread_info );
if( bli_gemm_am_b_master( cntl->thread_info )) {
bli_obj_release_pack( &b1_pack_s );
}
bli_gemm_c_barrier( cntl->thread_info );
if( bli_gemm_am_c_master( cntl->thread_info )) {
bli_obj_release_pack( &c1_pack_s );
}
}
void bli_gemm_blk_var4( obj_t* a,
obj_t* b,
obj_t* c,
gemm_t* cntl )
{
obj_t a1, a1_pack;
obj_t b_pack;
obj_t c1, c1_pack;
dim_t i;
dim_t bm_alg;
dim_t m_trans;
// Initialize all pack objects that are passed into packm_init().
bli_obj_init_pack( &a1_pack );
bli_obj_init_pack( &b_pack );
bli_obj_init_pack( &c1_pack );
// Query dimension in partitioning direction.
m_trans = bli_obj_length_after_trans( *a );
// Scale C by beta (if instructed).
bli_scalm_int( &BLIS_ONE,
c,
cntl_sub_scalm( cntl ) );
// Initialize object for packing B.
bli_packm_init( b, &b_pack,
cntl_sub_packm_b( cntl ) );
// Fuse the first iteration with incremental packing and computation.
{
obj_t b_inc, b_pack_inc;
obj_t c1_pack_inc;
dim_t j;
dim_t bn_inc;
dim_t n_trans;
// Query dimension in partitioning direction.
n_trans = bli_obj_width( b_pack );
// Determine the current algorithmic blocksize.
bm_alg = bli_determine_blocksize_f( 0, m_trans, a,
cntl_blocksize( cntl ) );
// Acquire partitions for A1 and C1.
bli_acquire_mpart_t2b( BLIS_SUBPART1,
0, bm_alg, a, &a1 );
bli_acquire_mpart_t2b( BLIS_SUBPART1,
0, bm_alg, c, &c1 );
// Initialize objects for packing A1 and C1.
bli_packm_init( &a1, &a1_pack, cntl_sub_packm_a( cntl ) );
bli_packm_init( &c1, &c1_pack, cntl_sub_packm_c( cntl ) );
// Pack A1 (if instructed).
bli_packm_int( &a1, &a1_pack, cntl_sub_packm_a( cntl ) );
// Pack C1 (if instructed).
bli_packm_int( &c1, &c1_pack, cntl_sub_packm_c( cntl ) );
// Partition along the n dimension.
for ( j = 0; j < n_trans; j += bn_inc )
{
// Determine the current incremental packing blocksize.
bn_inc = bli_determine_blocksize_f( j, n_trans, b,
cntl_blocksize_aux( cntl ) );
// Acquire partitions.
bli_acquire_mpart_l2r( BLIS_SUBPART1,
j, bn_inc, b, &b_inc );
bli_acquire_mpart_l2r( BLIS_SUBPART1,
j, bn_inc, &b_pack, &b_pack_inc );
bli_acquire_mpart_l2r( BLIS_SUBPART1,
j, bn_inc, &c1_pack, &c1_pack_inc );
// Pack B1 (if instructed).
bli_packm_int( &b_inc, &b_pack_inc, cntl_sub_packm_b( cntl ) );
// Perform gemm subproblem.
bli_gemm_int( &BLIS_ONE,
&a1_pack,
&b_pack_inc,
&BLIS_ONE,
&c1_pack_inc,
cntl_sub_gemm( cntl ) );
}
// Unpack C1 (if C1 was packed).
bli_unpackm_int( &c1_pack, &c1, cntl_sub_unpackm_c( cntl ) );
}
// Partition along the remaining portion of the m dimension.
for ( i = bm_alg; i < m_trans; i += bm_alg )
{
// Determine the current algorithmic blocksize.
// NOTE: Use of a (for execution datatype) is intentional!
// This causes the right blocksize to be used if c and a are
// complex and b is real.
bm_alg = bli_determine_blocksize_f( i, m_trans, a,
cntl_blocksize( cntl ) );
// Acquire partitions for A1 and C1.
bli_acquire_mpart_t2b( BLIS_SUBPART1,
i, bm_alg, a, &a1 );
bli_acquire_mpart_t2b( BLIS_SUBPART1,
i, bm_alg, c, &c1 );
// Initialize objects for packing A1 and C1.
bli_packm_init( &a1, &a1_pack,
cntl_sub_packm_a( cntl ) );
bli_packm_init( &c1, &c1_pack,
cntl_sub_packm_c( cntl ) );
// Pack A1 (if instructed).
bli_packm_int( &a1, &a1_pack,
cntl_sub_packm_a( cntl ) );
// Pack C1 (if instructed).
bli_packm_int( &c1, &c1_pack,
cntl_sub_packm_c( cntl ) );
// Perform gemm subproblem.
bli_gemm_int( &BLIS_ONE,
&a1_pack,
&b_pack,
&BLIS_ONE,
&c1_pack,
cntl_sub_gemm( cntl ) );
// Unpack C1 (if C1 was packed).
bli_unpackm_int( &c1_pack, &c1,
cntl_sub_unpackm_c( cntl ) );
}
// If any packing buffers were acquired within packm, release them back
// to the memory manager.
bli_obj_release_pack( &a1_pack );
bli_obj_release_pack( &b_pack );
bli_obj_release_pack( &c1_pack );
}
void bli_her2_blk_var3( conj_t conjh,
obj_t* alpha,
obj_t* alpha_conj,
obj_t* x,
obj_t* y,
obj_t* c,
her2_t* cntl )
{
obj_t c11, c11_pack;
obj_t c10;
obj_t c21;
obj_t x1, x1_pack;
obj_t y1, y1_pack;
obj_t y0;
obj_t y2;
dim_t mn;
dim_t ij;
dim_t b_alg;
// Even though this blocked algorithm is expressed only in terms of the
// lower triangular case, the upper triangular case is still supported:
// when bli_acquire_mpart_tl2br() is passed a matrix that is stored in
// in the upper triangle, and the requested subpartition resides in the
// lower triangle (as is the case for this algorithm), the routine fills
// the request as if the caller had actually requested the corresponding
// "mirror" subpartition in the upper triangle, except that it marks the
// subpartition for transposition (and conjugation).
// Initialize objects for packing.
bli_obj_init_pack( &c11_pack );
bli_obj_init_pack( &x1_pack );
bli_obj_init_pack( &y1_pack );
// Query dimension.
mn = bli_obj_length( *c );
// Partition diagonally.
for ( ij = 0; ij < mn; ij += b_alg )
{
// Determine the current algorithmic blocksize.
b_alg = bli_determine_blocksize_f( ij, mn, c,
cntl_blocksize( cntl ) );
// Acquire partitions for C11, C10, C21, x1, y1, y0, and y2.
bli_acquire_mpart_tl2br( BLIS_SUBPART11,
ij, b_alg, c, &c11 );
bli_acquire_mpart_tl2br( BLIS_SUBPART10,
ij, b_alg, c, &c10 );
bli_acquire_mpart_tl2br( BLIS_SUBPART21,
ij, b_alg, c, &c21 );
bli_acquire_vpart_f2b( BLIS_SUBPART1,
ij, b_alg, x, &x1 );
bli_acquire_vpart_f2b( BLIS_SUBPART1,
ij, b_alg, y, &y1 );
bli_acquire_vpart_f2b( BLIS_SUBPART0,
ij, b_alg, y, &y0 );
bli_acquire_vpart_f2b( BLIS_SUBPART2,
ij, b_alg, y, &y2 );
// Initialize objects for packing C11, x1, and y1 (if needed).
bli_packm_init( &c11, &c11_pack,
cntl_sub_packm_c11( cntl ) );
bli_packv_init( &x1, &x1_pack,
cntl_sub_packv_x1( cntl ) );
bli_packv_init( &y1, &y1_pack,
cntl_sub_packv_y1( cntl ) );
// Copy/pack C11, x1, y1 (if needed).
bli_packm_int( &c11, &c11_pack,
cntl_sub_packm_c11( cntl ),
&BLIS_PACKM_SINGLE_THREADED );
bli_packv_int( &x1, &x1_pack,
cntl_sub_packv_x1( cntl ) );
bli_packv_int( &y1, &y1_pack,
cntl_sub_packv_y1( cntl ) );
// C10 = C10 + alpha * x1 * y0';
bli_ger_int( BLIS_NO_CONJUGATE,
conjh,
alpha,
&x1_pack,
&y0,
&c10,
cntl_sub_ger_rp( cntl ) );
// C21 = C21 + conj(alpha) * y2 * x1';
bli_ger_int( BLIS_NO_CONJUGATE,
conjh,
alpha_conj,
&y2,
&x1_pack,
&c21,
cntl_sub_ger_cp( cntl ) );
// C11 = C11 + alpha * x1 * y1' + conj(alpha) * y1 * x1';
bli_her2_int( conjh,
alpha,
alpha_conj,
&x1_pack,
&y1_pack,
&c11_pack,
cntl_sub_her2( cntl ) );
// Copy/unpack C11 (if C11 was packed).
bli_unpackm_int( &c11_pack, &c11,
cntl_sub_unpackm_c11( cntl ),
&BLIS_PACKM_SINGLE_THREADED );
}
// If any packing buffers were acquired within packm, release them back
// to the memory manager.
bli_obj_release_pack( &c11_pack );
bli_obj_release_pack( &x1_pack );
bli_obj_release_pack( &y1_pack );
}
void bli_trsm_blk_var1f( obj_t* a,
obj_t* b,
obj_t* c,
trsm_t* cntl )
{
obj_t a1, a1_pack;
obj_t b_pack;
obj_t c1;
dim_t i;
dim_t b_alg;
dim_t m_trans;
dim_t offA;
// Initialize all pack objects that are passed into packm_init().
bli_obj_init_pack( &a1_pack );
bli_obj_init_pack( &b_pack );
// Set the default length of and offset to the non-zero part of A.
m_trans = bli_obj_length_after_trans( *a );
offA = 0;
// If A is lower triangular, we have to adjust where the non-zero part of
// A begins.
if ( bli_obj_is_lower( *a ) )
offA = bli_abs( bli_obj_diag_offset_after_trans( *a ) );
// Initialize object for packing B.
bli_packm_init( b, &b_pack,
cntl_sub_packm_b( cntl ) );
// Pack B1 (if instructed).
bli_packm_int( b, &b_pack,
cntl_sub_packm_b( cntl ) );
// Partition along the remaining portion of the m dimension.
for ( i = offA; i < m_trans; i += b_alg )
{
// Determine the current algorithmic blocksize.
b_alg = bli_determine_blocksize_f( i, m_trans, a,
cntl_blocksize( cntl ) );
// Acquire partitions for A1 and C1.
bli_acquire_mpart_t2b( BLIS_SUBPART1,
i, b_alg, a, &a1 );
bli_acquire_mpart_t2b( BLIS_SUBPART1,
i, b_alg, c, &c1 );
// Initialize object for packing A1.
bli_packm_init( &a1, &a1_pack,
cntl_sub_packm_a( cntl ) );
// Pack A1 (if instructed).
bli_packm_int( &a1, &a1_pack,
cntl_sub_packm_a( cntl ) );
// Perform trsm subproblem.
bli_trsm_int( &BLIS_ONE,
&a1_pack,
&b_pack,
&BLIS_ONE,
&c1,
cntl_sub_trsm( cntl ) );
}
// If any packing buffers were acquired within packm, release them back
// to the memory manager.
bli_obj_release_pack( &a1_pack );
bli_obj_release_pack( &b_pack );
}
void bli_gemv_blk_var1( obj_t* alpha,
obj_t* a,
obj_t* x,
obj_t* beta,
obj_t* y,
gemv_t* cntl )
{
obj_t a1, a1_pack;
obj_t y1, y1_pack;
dim_t m_trans;
dim_t i;
dim_t b_alg;
// Initialize objects for packing.
bli_obj_init_pack( &a1_pack );
bli_obj_init_pack( &y1_pack );
// Query dimension in partitioning direction.
m_trans = bli_obj_length_after_trans( *a );
// Partition along the m dimension.
for ( i = 0; i < m_trans; i += b_alg )
{
// Determine the current algorithmic blocksize.
b_alg = bli_determine_blocksize_f( i, m_trans, a,
cntl_blocksize( cntl ) );
// Acquire partitions for A1 and y1.
bli_acquire_mpart_t2b( BLIS_SUBPART1,
i, b_alg, a, &a1 );
bli_acquire_vpart_f2b( BLIS_SUBPART1,
i, b_alg, y, &y1 );
// Initialize objects for packing A1 and y1 (if needed).
bli_packm_init( &a1, &a1_pack,
cntl_sub_packm_a( cntl ) );
bli_packv_init( &y1, &y1_pack,
cntl_sub_packv_y( cntl ) );
// Copy/pack A1, y1 (if needed).
bli_packm_int( &a1, &a1_pack,
cntl_sub_packm_a( cntl ),
&BLIS_PACKM_SINGLE_THREADED );
bli_packv_int( &y1, &y1_pack,
cntl_sub_packv_y( cntl ) );
// y1 = beta * y1 + alpha * A1 * x;
bli_gemv_int( BLIS_NO_TRANSPOSE,
BLIS_NO_CONJUGATE,
alpha,
&a1_pack,
x,
beta,
&y1_pack,
cntl_sub_gemv( cntl ) );
// Copy/unpack y1 (if y1 was packed).
bli_unpackv_int( &y1_pack, &y1,
cntl_sub_unpackv_y( cntl ) );
}
// If any packing buffers were acquired within packm, release them back
// to the memory manager.
bli_packm_release( &a1_pack, cntl_sub_packm_a( cntl ) );
bli_packv_release( &y1_pack, cntl_sub_packv_y( cntl ) );
}
void bli_trmm_blk_var1f( obj_t* a,
obj_t* b,
obj_t* c,
gemm_t* cntl,
trmm_thrinfo_t* thread )
{
obj_t b_pack_s;
obj_t a1_pack_s, c1_pack_s;
obj_t a1, c1;
obj_t* a1_pack = NULL;
obj_t* b_pack = NULL;
obj_t* c1_pack = NULL;
dim_t i;
dim_t b_alg;
// Prune any zero region that exists along the partitioning dimension.
bli_trmm_prune_unref_mparts_m( a, b, c );
if( thread_am_ochief( thread ) ) {
// Initialize object for packing B.
bli_obj_init_pack( &b_pack_s );
bli_packm_init( b, &b_pack_s,
cntl_sub_packm_b( cntl ) );
// Scale C by beta (if instructed).
// Since scalm doesn't support multithreading yet, must be done by chief thread (ew)
bli_scalm_int( &BLIS_ONE,
c,
cntl_sub_scalm( cntl ) );
}
b_pack = thread_obroadcast( thread, &b_pack_s );
// Initialize all pack objects that are passed into packm_init().
if( thread_am_ichief( thread ) ) {
bli_obj_init_pack( &a1_pack_s );
bli_obj_init_pack( &c1_pack_s );
}
a1_pack = thread_ibroadcast( thread, &a1_pack_s );
c1_pack = thread_ibroadcast( thread, &c1_pack_s );
// Pack B (if instructed).
bli_packm_int( b, b_pack,
cntl_sub_packm_b( cntl ),
trmm_thread_sub_opackm( thread ) );
// Set the default length of and offset to the non-zero part of A.
//m_trans = bli_obj_length_after_trans( *a );
//offA = 0;
// If A is lower triangular, we have to adjust where the non-zero part of
// A begins. If A is upper triangular, we have to adjust the length of
// the non-zero part. If A is general/dense, then we keep the defaults.
//if ( bli_obj_is_lower( *a ) )
// offA = bli_abs( bli_obj_diag_offset_after_trans( *a ) );
//else if ( bli_obj_is_upper( *a ) )
// m_trans = bli_abs( bli_obj_diag_offset_after_trans( *a ) ) +
// bli_obj_width_after_trans( *a );
dim_t my_start, my_end;
bli_get_range_weighted_t2b( thread, a,
bli_blksz_get_mult_for_obj( a, cntl_blocksize( cntl ) ),
&my_start, &my_end );
// Partition along the m dimension.
for ( i = my_start; i < my_end; i += b_alg )
{
// Determine the current algorithmic blocksize.
b_alg = bli_determine_blocksize_f( i, my_end, a,
cntl_blocksize( cntl ) );
// Acquire partitions for A1 and C1.
bli_acquire_mpart_t2b( BLIS_SUBPART1,
i, b_alg, a, &a1 );
bli_acquire_mpart_t2b( BLIS_SUBPART1,
i, b_alg, c, &c1 );
// Initialize objects for packing A1 and C1.
if( thread_am_ichief( thread ) ) {
bli_packm_init( &a1, a1_pack,
cntl_sub_packm_a( cntl ) );
bli_packm_init( &c1, c1_pack,
cntl_sub_packm_c( cntl ) );
}
thread_ibarrier( thread );
// Pack A1 (if instructed).
bli_packm_int( &a1, a1_pack,
cntl_sub_packm_a( cntl ),
trmm_thread_sub_ipackm( thread ) );
// Pack C1 (if instructed).
bli_packm_int( &c1, c1_pack,
cntl_sub_packm_c( cntl ),
trmm_thread_sub_ipackm( thread ) );
// Perform trmm subproblem.
bli_trmm_int( &BLIS_ONE,
a1_pack,
b_pack,
&BLIS_ONE,
c1_pack,
cntl_sub_gemm( cntl ),
trmm_thread_sub_trmm( thread ) );
thread_ibarrier( thread );
// Unpack C1 (if C1 was packed).
bli_unpackm_int( c1_pack, &c1,
cntl_sub_unpackm_c( cntl ),
trmm_thread_sub_ipackm( thread ) );
}
// If any packing buffers were acquired within packm, release them back
// to the memory manager.
thread_obarrier( thread );
if( thread_am_ochief( thread ) )
bli_packm_release( b_pack, cntl_sub_packm_b( cntl ) );
if( thread_am_ichief( thread ) ){
bli_packm_release( a1_pack, cntl_sub_packm_a( cntl ) );
bli_packm_release( c1_pack, cntl_sub_packm_c( cntl ) );
}
}
void bli_trsv_u_blk_var2( obj_t* alpha,
obj_t* a,
obj_t* x,
cntx_t* cntx,
trsv_t* cntl )
{
obj_t a11, a11_pack;
obj_t a01;
obj_t x1, x1_pack;
obj_t x0;
dim_t mn;
dim_t ij;
dim_t b_alg;
// Initialize objects for packing.
bli_obj_init_pack( &a11_pack );
bli_obj_init_pack( &x1_pack );
// Query dimension.
mn = bli_obj_length( a );
// x = alpha * x;
bli_scalv_int( alpha,
x,
cntx, bli_cntl_sub_scalv( cntl ) );
// Partition diagonally.
for ( ij = 0; ij < mn; ij += b_alg )
{
// Determine the current algorithmic blocksize.
b_alg = bli_determine_blocksize_b( ij, mn, a,
bli_cntl_bszid( cntl ), cntx );
// Acquire partitions for A11, A01, x1, and x0.
bli_acquire_mpart_br2tl( BLIS_SUBPART11,
ij, b_alg, a, &a11 );
bli_acquire_mpart_br2tl( BLIS_SUBPART01,
ij, b_alg, a, &a01 );
bli_acquire_vpart_b2f( BLIS_SUBPART1,
ij, b_alg, x, &x1 );
bli_acquire_vpart_b2f( BLIS_SUBPART0,
ij, b_alg, x, &x0 );
// Initialize objects for packing A11 and x1 (if needed).
bli_packm_init( &a11, &a11_pack,
cntx, bli_cntl_sub_packm_a11( cntl ) );
bli_packv_init( &x1, &x1_pack,
cntx, bli_cntl_sub_packv_x1( cntl ) );
// Copy/pack A11, x1 (if needed).
bli_packm_int( &a11, &a11_pack,
cntx, bli_cntl_sub_packm_a11( cntl ),
&BLIS_PACKM_SINGLE_THREADED );
bli_packv_int( &x1, &x1_pack,
cntx, bli_cntl_sub_packv_x1( cntl ) );
// x1 = x1 / tril( A11 );
bli_trsv_int( &BLIS_ONE,
&a11_pack,
&x1_pack,
cntx,
bli_cntl_sub_trsv( cntl ) );
// x0 = x0 - A01 * x1;
bli_gemv_int( BLIS_NO_TRANSPOSE,
BLIS_NO_CONJUGATE,
&BLIS_MINUS_ONE,
&a01,
&x1_pack,
&BLIS_ONE,
&x0,
cntx,
bli_cntl_sub_gemv_cp( cntl ) );
// Copy/unpack x1 (if x1 was packed).
bli_unpackv_int( &x1_pack, &x1,
cntx, bli_cntl_sub_unpackv_x1( cntl ) );
}
// If any packing buffers were acquired within packm, release them back
// to the memory manager.
bli_packm_release( &a11_pack, bli_cntl_sub_packm_a11( cntl ) );
bli_packv_release( &x1_pack, bli_cntl_sub_packv_x1( cntl ) );
}
void bli_trsm_u_blk_var4( obj_t* alpha,
obj_t* a,
obj_t* b,
obj_t* beta,
obj_t* c,
trsm_t* cntl )
{
obj_t a1, a1_pack;
obj_t b_pack;
obj_t c1;
dim_t i;
dim_t bm_alg;
dim_t m_trans;
// Initialize all pack objects that are passed into packm_init().
bli_obj_init_pack( &a1_pack );
bli_obj_init_pack( &b_pack );
// Query dimension in partitioning direction.
m_trans = bli_obj_length_after_trans( *a );
// Initialize object for packing B.
bli_packm_init( b, &b_pack,
cntl_sub_packm_b( cntl ) );
// Find the offset to the first non-zero block of A.
for ( i = 0; i < m_trans; i += bm_alg )
{
// Determine the current algorithmic blocksize.
bm_alg = bli_determine_blocksize_b( i, m_trans, a,
cntl_blocksize( cntl ) );
// Acquire partitions for A1 and C1.
bli_acquire_mpart_b2t( BLIS_SUBPART1,
i, bm_alg, a, &a1 );
if ( !bli_obj_is_zeros( a1 ) ) break;
}
// Fuse the first iteration with incremental packing and computation.
{
obj_t b_inc, b_pack_inc;
obj_t c1_inc;
dim_t j;
dim_t bn_inc;
dim_t n_trans;
// Query dimension in partitioning direction.
n_trans = bli_obj_width( b_pack );
// Determine the current algorithmic blocksize.
bm_alg = bli_determine_blocksize_b( i, m_trans, a,
cntl_blocksize( cntl ) );
// Acquire partitions for A1 and C1.
bli_acquire_mpart_b2t( BLIS_SUBPART1,
i, bm_alg, a, &a1 );
bli_acquire_mpart_b2t( BLIS_SUBPART1,
i, bm_alg, c, &c1 );
// Initialize objects for packing A1 and C1.
bli_packm_init( &a1, &a1_pack, cntl_sub_packm_a( cntl ) );
// Pack A1 and scale by alpha (if instructed).
bli_packm_int( alpha, &a1, &a1_pack, cntl_sub_packm_a( cntl ) );
// Partition along the n dimension.
for ( j = 0; j < n_trans; j += bn_inc )
{
// Determine the current incremental packing blocksize.
bn_inc = bli_determine_blocksize_f( j, n_trans, b,
cntl_blocksize_aux( cntl ) );
// Acquire partitions.
bli_acquire_mpart_l2r( BLIS_SUBPART1,
j, bn_inc, b, &b_inc );
bli_acquire_mpart_l2r( BLIS_SUBPART1,
j, bn_inc, &b_pack, &b_pack_inc );
bli_acquire_mpart_l2r( BLIS_SUBPART1,
j, bn_inc, &c1, &c1_inc );
// Pack B1 and scale by alpha (if instructed).
bli_packm_int( alpha, &b_inc, &b_pack_inc, cntl_sub_packm_b( cntl ) );
// Perform trsm subproblem.
bli_trsm_int( BLIS_LEFT,
alpha,
&a1_pack,
&b_pack_inc,
beta,
&c1_inc,
cntl_sub_trsm( cntl ) );
}
}
// Partition along the remaining portion of the m dimension.
for ( i = i + bm_alg; i < m_trans; i += bm_alg )
{
// Determine the current algorithmic blocksize.
bm_alg = bli_determine_blocksize_b( i, m_trans, a,
cntl_blocksize( cntl ) );
// Acquire partitions for A1 and C1.
bli_acquire_mpart_b2t( BLIS_SUBPART1,
i, bm_alg, a, &a1 );
bli_acquire_mpart_b2t( BLIS_SUBPART1,
i, bm_alg, c, &c1 );
// Initialize object for packing A1.
bli_packm_init( &a1, &a1_pack,
cntl_sub_packm_a( cntl ) );
// Pack A1 and scale by alpha (if instructed).
bli_packm_int( alpha,
&a1, &a1_pack,
cntl_sub_packm_a( cntl ) );
if ( bli_obj_intersects_diag( a1_pack ) )
bli_trsm_int( BLIS_LEFT,
alpha,
&a1_pack,
&b_pack,
beta,
&c1,
cntl_sub_trsm( cntl ) );
else
bli_gemm_int( &BLIS_MINUS_ONE,
&a1_pack,
&b_pack,
&BLIS_ONE,
&c1,
cntl_sub_gemm( cntl ) );
}
// If any packing buffers were acquired within packm, release them back
// to the memory manager.
bli_obj_release_pack( &a1_pack );
bli_obj_release_pack( &b_pack );
}
void bli_trsm_l_blk_var4( obj_t* alpha,
obj_t* a,
obj_t* b,
obj_t* beta,
obj_t* c,
trsm_t* cntl )
{
obj_t a1, a1_pack;
obj_t b_pack;
obj_t c1;
dim_t i;
dim_t bm_alg;
dim_t m_trans;
dim_t offB;
// Initialize all pack objects that are passed into packm_init().
bli_obj_init_pack( &a1_pack );
bli_obj_init_pack( &b_pack );
// Query dimension in partitioning direction.
m_trans = bli_obj_length_after_trans( *a );
// Use the diagonal offset of A to skip over the zero region.
offB = bli_abs( bli_obj_diag_offset_after_trans( *a ) );
// Initialize object for packing B.
bli_packm_init( b, &b_pack,
cntl_sub_packm_b( cntl ) );
// Fuse the first iteration with incremental packing and computation.
{
obj_t b_inc, b_pack_inc;
obj_t c1_inc;
dim_t j;
dim_t bn_inc;
dim_t n_trans;
// Query dimension in partitioning direction.
n_trans = bli_obj_width( b_pack );
// Determine the current algorithmic blocksize.
bm_alg = bli_determine_blocksize_f( offB, m_trans, a,
cntl_blocksize( cntl ) );
// Acquire partitions for A1 and C1.
bli_acquire_mpart_t2b( BLIS_SUBPART1,
offB, bm_alg, a, &a1 );
bli_acquire_mpart_t2b( BLIS_SUBPART1,
offB, bm_alg, c, &c1 );
// Initialize objects for packing A1 and C1.
bli_packm_init( &a1, &a1_pack, cntl_sub_packm_a( cntl ) );
// Pack A1 and scale by alpha (if instructed).
bli_packm_int( alpha, &a1, &a1_pack, cntl_sub_packm_a( cntl ) );
// Partition along the n dimension.
for ( j = 0; j < n_trans; j += bn_inc )
{
// Determine the current incremental packing blocksize.
bn_inc = bli_determine_blocksize_f( j, n_trans, b,
cntl_blocksize_aux( cntl ) );
// Acquire partitions.
bli_acquire_mpart_l2r( BLIS_SUBPART1,
j, bn_inc, b, &b_inc );
bli_acquire_mpart_l2r( BLIS_SUBPART1,
j, bn_inc, &b_pack, &b_pack_inc );
bli_acquire_mpart_l2r( BLIS_SUBPART1,
j, bn_inc, &c1, &c1_inc );
// Pack B1 and scale by alpha (if instructed).
bli_packm_int( alpha, &b_inc, &b_pack_inc, cntl_sub_packm_b( cntl ) );
// Perform trsm subproblem.
bli_trsm_int( BLIS_LEFT,
alpha,
&a1_pack,
&b_pack_inc,
beta,
&c1_inc,
cntl_sub_trsm( cntl ) );
}
// Unpack B to the corresponding region of C. (Note that B and C1 are
// conformal since A1 is square.)
//bli_unpackm_int( &b_pack, &c1,
// cntl_sub_unpackm_c( cntl ) );
}
// Partition along the remaining portion of the m dimension.
for ( i = offB + bm_alg; i < m_trans; i += bm_alg )
{
// Determine the current algorithmic blocksize.
bm_alg = bli_determine_blocksize_f( i, m_trans, a,
cntl_blocksize( cntl ) );
// Acquire partitions for A1 and C1.
bli_acquire_mpart_t2b( BLIS_SUBPART1,
i, bm_alg, a, &a1 );
bli_acquire_mpart_t2b( BLIS_SUBPART1,
i, bm_alg, c, &c1 );
// Initialize object for packing A1.
bli_packm_init( &a1, &a1_pack,
cntl_sub_packm_a( cntl ) );
// Pack A1 and scale by alpha (if instructed).
bli_packm_int( alpha,
&a1, &a1_pack,
cntl_sub_packm_a( cntl ) );
// Perform trsm subproblem.
if ( bli_obj_intersects_diag( a1_pack ) )
bli_trsm_int( BLIS_LEFT,
alpha,
&a1_pack,
&b_pack,
beta,
&c1,
cntl_sub_trsm( cntl ) );
else
bli_gemm_int( &BLIS_MINUS_ONE,
&a1_pack,
&b_pack,
&BLIS_ONE,
&c1,
cntl_sub_gemm( cntl ) );
}
// If any packing buffers were acquired within packm, release them back
// to the memory manager.
bli_obj_release_pack( &a1_pack );
bli_obj_release_pack( &b_pack );
}
void bli_herk_blk_var1f( obj_t* a,
obj_t* ah,
obj_t* c,
herk_t* cntl )
{
obj_t a1, a1_pack;
obj_t ah_pack;
obj_t c1, c1_pack;
dim_t i;
dim_t b_alg;
dim_t m_trans;
// Initialize all pack objects that are passed into packm_init().
bli_obj_init_pack( &a1_pack );
bli_obj_init_pack( &ah_pack );
bli_obj_init_pack( &c1_pack );
// Query dimension in partitioning direction.
m_trans = bli_obj_length_after_trans( *c );
// Scale C by beta (if instructed).
bli_scalm_int( &BLIS_ONE,
c,
cntl_sub_scalm( cntl ) );
// Initialize object for packing A'.
bli_packm_init( ah, &ah_pack,
cntl_sub_packm_b( cntl ) );
// Pack A' (if instructed).
bli_packm_int( ah, &ah_pack,
cntl_sub_packm_b( cntl ) );
// Partition along the m dimension.
for ( i = 0; i < m_trans; i += b_alg )
{
// Determine the current algorithmic blocksize.
b_alg = bli_determine_blocksize_f( i, m_trans, a,
cntl_blocksize( cntl ) );
// Acquire partitions for A1 and C1.
bli_acquire_mpart_t2b( BLIS_SUBPART1,
i, b_alg, a, &a1 );
bli_acquire_mpart_t2b( BLIS_SUBPART1,
i, b_alg, c, &c1 );
// Initialize objects for packing A1 and C1.
bli_packm_init( &a1, &a1_pack,
cntl_sub_packm_a( cntl ) );
bli_packm_init( &c1, &c1_pack,
cntl_sub_packm_c( cntl ) );
// Pack A1 (if instructed).
bli_packm_int( &a1, &a1_pack,
cntl_sub_packm_a( cntl ) );
// Pack C1 (if instructed).
bli_packm_int( &c1, &c1_pack,
cntl_sub_packm_c( cntl ) );
// Perform herk subproblem.
bli_herk_int( &BLIS_ONE,
&a1_pack,
&ah_pack,
&BLIS_ONE,
&c1_pack,
cntl_sub_herk( cntl ) );
// Unpack C1 (if C1 was packed).
bli_unpackm_int( &c1_pack, &c1,
cntl_sub_unpackm_c( cntl ) );
}
// If any packing buffers were acquired within packm, release them back
// to the memory manager.
bli_obj_release_pack( &a1_pack );
bli_obj_release_pack( &ah_pack );
bli_obj_release_pack( &c1_pack );
}
void bli_trsm_blk_var1f( obj_t* a,
obj_t* b,
obj_t* c,
trsm_t* cntl,
trsm_thrinfo_t* thread )
{
obj_t b_pack_s;
obj_t a1_pack_s;
obj_t a1, c1;
obj_t* b_pack = NULL;
obj_t* a1_pack = NULL;
dim_t i;
dim_t b_alg;
dim_t m_trans;
dim_t offA;
// Initialize object for packing B.
if( thread_am_ochief( thread ) ) {
bli_obj_init_pack( &b_pack_s );
bli_packm_init( b, &b_pack_s,
cntl_sub_packm_b( cntl ) );
}
b_pack = thread_obroadcast( thread, &b_pack_s );
// Initialize object for packing B.
if( thread_am_ichief( thread ) ) {
bli_obj_init_pack( &a1_pack_s );
}
a1_pack = thread_ibroadcast( thread, &a1_pack_s );
// Pack B1 (if instructed).
bli_packm_int( b, b_pack,
cntl_sub_packm_b( cntl ),
trsm_thread_sub_opackm( thread ) );
// Set the default length of and offset to the non-zero part of A.
m_trans = bli_obj_length_after_trans( *a );
offA = 0;
// If A is lower triangular, we have to adjust where the non-zero part of
// A begins.
if ( bli_obj_is_lower( *a ) )
offA = bli_abs( bli_obj_diag_offset_after_trans( *a ) );
dim_t start, end;
num_t dt = bli_obj_execution_datatype( *a );
bli_get_range_t2b( thread, offA, m_trans,
//bli_lcm( bli_info_get_default_nr( BLIS_TRSM, dt ), bli_info_get_default_mr( BLIS_TRSM, dt ) ),
bli_info_get_default_mc( BLIS_TRSM, dt ),
&start, &end );
// Partition along the remaining portion of the m dimension.
for ( i = start; i < end; i += b_alg )
{
// Determine the current algorithmic blocksize.
b_alg = bli_determine_blocksize_f( i, end, a,
cntl_blocksize( cntl ) );
// Acquire partitions for A1 and C1.
bli_acquire_mpart_t2b( BLIS_SUBPART1,
i, b_alg, a, &a1 );
bli_acquire_mpart_t2b( BLIS_SUBPART1,
i, b_alg, c, &c1 );
// Initialize object for packing A1.
if( thread_am_ichief( thread ) ) {
bli_packm_init( &a1, a1_pack,
cntl_sub_packm_a( cntl ) );
}
thread_ibarrier( thread );
// Pack A1 (if instructed).
bli_packm_int( &a1, a1_pack,
cntl_sub_packm_a( cntl ),
trsm_thread_sub_ipackm( thread ) );
// Perform trsm subproblem.
bli_trsm_int( &BLIS_ONE,
a1_pack,
b_pack,
&BLIS_ONE,
&c1,
cntl_sub_trsm( cntl ),
trsm_thread_sub_trsm( thread ) );
thread_ibarrier( thread );
}
// If any packing buffers were acquired within packm, release them back
// to the memory manager.
thread_obarrier( thread );
if( thread_am_ochief( thread ) )
bli_packm_release( b_pack, cntl_sub_packm_b( cntl ) );
if( thread_am_ichief( thread ) )
bli_packm_release( a1_pack, cntl_sub_packm_a( cntl ) );
}
void bli_herk_blk_var3f( obj_t* a,
obj_t* ah,
obj_t* c,
herk_t* cntl,
herk_thrinfo_t* thread )
{
obj_t c_pack_s;
obj_t a1_pack_s, ah1_pack_s;
obj_t a1, ah1;
obj_t* a1_pack = NULL;
obj_t* ah1_pack = NULL;
obj_t* c_pack = NULL;
dim_t i;
dim_t b_alg;
dim_t k_trans;
if( thread_am_ochief( thread ) ) {
// Initialize object for packing C.
bli_obj_init_pack( &c_pack_s );
bli_packm_init( c, &c_pack_s,
cntl_sub_packm_c( cntl ) );
// Scale C by beta (if instructed).
bli_scalm_int( &BLIS_ONE,
c,
cntl_sub_scalm( cntl ) );
}
c_pack = thread_obroadcast( thread, &c_pack_s );
// Initialize all pack objects that are passed into packm_init().
if( thread_am_ichief( thread ) ) {
bli_obj_init_pack( &a1_pack_s );
bli_obj_init_pack( &ah1_pack_s );
}
a1_pack = thread_ibroadcast( thread, &a1_pack_s );
ah1_pack = thread_ibroadcast( thread, &ah1_pack_s );
// Pack C (if instructed).
bli_packm_int( c, c_pack,
cntl_sub_packm_c( cntl ),
herk_thread_sub_opackm( thread ) );
// Query dimension in partitioning direction.
k_trans = bli_obj_width_after_trans( *a );
// Partition along the k dimension.
for ( i = 0; i < k_trans; i += b_alg )
{
// Determine the current algorithmic blocksize.
b_alg = bli_determine_blocksize_f( i, k_trans, a,
cntl_blocksize( cntl ) );
// Acquire partitions for A1 and A1'.
bli_acquire_mpart_l2r( BLIS_SUBPART1,
i, b_alg, a, &a1 );
bli_acquire_mpart_t2b( BLIS_SUBPART1,
i, b_alg, ah, &ah1 );
// Initialize objects for packing A1 and A1'.
if( thread_am_ichief( thread ) ) {
bli_packm_init( &a1, a1_pack,
cntl_sub_packm_a( cntl ) );
bli_packm_init( &ah1, ah1_pack,
cntl_sub_packm_b( cntl ) );
}
thread_ibarrier( thread );
// Pack A1 (if instructed).
bli_packm_int( &a1, a1_pack,
cntl_sub_packm_a( cntl ),
herk_thread_sub_ipackm( thread ) );
// Pack B1 (if instructed).
bli_packm_int( &ah1, ah1_pack,
cntl_sub_packm_b( cntl ),
herk_thread_sub_ipackm( thread ) );
// Perform herk subproblem.
bli_herk_int( &BLIS_ONE,
a1_pack,
ah1_pack,
&BLIS_ONE,
c_pack,
cntl_sub_herk( cntl ),
herk_thread_sub_herk( thread ) );
// This variant executes multiple rank-k updates. Therefore, if the
// internal beta scalar on matrix C is non-zero, we must use it
// only for the first iteration (and then BLIS_ONE for all others).
// And since c_pack is a local obj_t, we can simply overwrite the
// internal beta scalar with BLIS_ONE once it has been used in the
// first iteration.
if ( i == 0 ) thread_ibarrier( thread );
if ( i == 0 && thread_am_ichief( thread ) ) bli_obj_scalar_reset( c_pack );
}
thread_obarrier( thread );
// Unpack C (if C was packed).
bli_unpackm_int( c_pack, c,
cntl_sub_unpackm_c( cntl ),
herk_thread_sub_opackm( thread ) );
// If any packing buffers were acquired within packm, release them back
// to the memory manager.
if( thread_am_ochief( thread ) ) {
bli_obj_release_pack( c_pack );
}
if( thread_am_ichief( thread ) ) {
bli_obj_release_pack( a1_pack );
bli_obj_release_pack( ah1_pack );
}
}
void libblis_test_gemmtrsm_ukr_experiment( test_params_t* params,
test_op_t* op,
mt_impl_t impl,
num_t datatype,
char* pc_str,
char* sc_str,
unsigned int p_cur,
double* perf,
double* resid )
{
unsigned int n_repeats = params->n_repeats;
unsigned int i;
double time_min = 1e9;
double time;
dim_t m, n, k;
char sc_a = 'c';
char sc_b = 'r';
side_t side = BLIS_LEFT;
uplo_t uploa;
obj_t kappa;
obj_t alpha;
obj_t a_big, a, b;
obj_t b11, c11;
obj_t ap, bp;
obj_t a1xp, a11p, bx1p, b11p;
obj_t c11_save;
// Map the dimension specifier to actual dimensions.
k = libblis_test_get_dim_from_prob_size( op->dim_spec[0], p_cur );
// Fix m and n to MR and NR, respectively.
m = bli_blksz_for_type( datatype, gemm_mr );
n = bli_blksz_for_type( datatype, gemm_nr );
// Store the register blocksizes so that the driver can retrieve the
// values later when printing results.
op->dim_aux[0] = m;
op->dim_aux[1] = n;
// Map parameter characters to BLIS constants.
bli_param_map_char_to_blis_uplo( pc_str[0], &uploa );
// Create test scalars.
bli_obj_scalar_init_detached( datatype, &kappa );
bli_obj_scalar_init_detached( datatype, &alpha );
// Create test operands (vectors and/or matrices).
libblis_test_mobj_create( params, datatype, BLIS_NO_TRANSPOSE,
sc_a, k+m, k+m, &a_big );
libblis_test_mobj_create( params, datatype, BLIS_NO_TRANSPOSE,
sc_b, k+m, n, &b );
libblis_test_mobj_create( params, datatype, BLIS_NO_TRANSPOSE,
sc_str[0], m, n, &c11 );
libblis_test_mobj_create( params, datatype, BLIS_NO_TRANSPOSE,
sc_str[0], m, n, &c11_save );
// Set alpha.
if ( bli_obj_is_real( b ) )
{
bli_setsc( 2.0, 0.0, &alpha );
}
else
{
bli_setsc( 2.0, 0.0, &alpha );
}
// Set the structure, uplo, and diagonal offset properties of A.
bli_obj_set_struc( BLIS_TRIANGULAR, a_big );
bli_obj_set_uplo( uploa, a_big );
// Randomize A and make it densely triangular.
bli_randm( &a_big );
// Normalize B and save.
bli_randm( &b );
bli_setsc( 1.0/( double )m, 0.0, &kappa );
bli_scalm( &kappa, &b );
// Use the last m rows of A_big as A.
bli_acquire_mpart_t2b( BLIS_SUBPART1, k, m, &a_big, &a );
// Locate the B11 block of B, copy to C11, and save.
if ( bli_obj_is_lower( a ) )
bli_acquire_mpart_t2b( BLIS_SUBPART1, k, m, &b, &b11 );
else
bli_acquire_mpart_t2b( BLIS_SUBPART1, 0, m, &b, &b11 );
bli_copym( &b11, &c11 );
bli_copym( &c11, &c11_save );
// Initialize pack objects.
bli_obj_init_pack( &ap );
bli_obj_init_pack( &bp );
// Create pack objects for a and b.
libblis_test_pobj_create( gemm_mr,
gemm_mr,
BLIS_INVERT_DIAG,
BLIS_PACKED_ROW_PANELS,
BLIS_BUFFER_FOR_A_BLOCK,
&a, &ap );
libblis_test_pobj_create( gemm_mr,
gemm_nr,
BLIS_NO_INVERT_DIAG,
BLIS_PACKED_COL_PANELS,
BLIS_BUFFER_FOR_B_PANEL,
&b, &bp );
// Pack the contents of a to ap.
bli_packm_blk_var3( &a, &ap );
// Pack the contents of b to bp.
bli_packm_blk_var2( &b, &bp );
// Create subpartitions from the a and b panels.
bli_gemmtrsm_ukr_make_subparts( k, &ap, &bp,
&a1xp, &a11p, &bx1p, &b11p );
// Repeat the experiment n_repeats times and record results.
for ( i = 0; i < n_repeats; ++i )
{
bli_copym( &c11_save, &c11 );
// Re-pack the contents of b to bp.
bli_packm_blk_var2( &b, &bp );
time = bli_clock();
libblis_test_gemmtrsm_ukr_impl( impl, side, &alpha,
&a1xp, &a11p, &bx1p, &b11p, &c11 );
time_min = bli_clock_min_diff( time_min, time );
}
// Estimate the performance of the best experiment repeat.
*perf = ( 2.0 * m * n * k + 1.0 * m * m * n ) / time_min / FLOPS_PER_UNIT_PERF;
if ( bli_obj_is_complex( b ) ) *perf *= 4.0;
// Perform checks.
libblis_test_gemmtrsm_ukr_check( side, &alpha,
&a1xp, &a11p, &bx1p, &b11p, &c11, &c11_save, resid );
// Zero out performance and residual if output matrix is empty.
//libblis_test_check_empty_problem( &c11, perf, resid );
// Release packing buffers within pack objects.
bli_obj_release_pack( &ap );
bli_obj_release_pack( &bp );
// Free the test objects.
bli_obj_free( &a_big );
bli_obj_free( &b );
bli_obj_free( &c11 );
bli_obj_free( &c11_save );
}
void bli_herk_blk_var1f( obj_t* a,
obj_t* ah,
obj_t* c,
gemm_t* cntl,
herk_thrinfo_t* thread )
{
obj_t ah_pack_s;
obj_t a1_pack_s, c1_pack_s;
obj_t a1, c1;
obj_t* a1_pack;
obj_t* c1_pack;
obj_t* ah_pack;
dim_t i;
dim_t b_alg;
// Prune any zero region that exists along the partitioning dimension.
bli_herk_prune_unref_mparts_m( a, ah, c );
if( thread_am_ochief( thread ) ) {
// Initialize object for packing A'.
bli_obj_init_pack( &ah_pack_s );
bli_packm_init( ah, &ah_pack_s,
cntl_sub_packm_b( cntl ) );
// Scale C by beta (if instructed).
// Since scalm doesn't support multithreading yet, must be done by chief thread (ew)
bli_scalm_int( &BLIS_ONE,
c,
cntl_sub_scalm( cntl ) );
}
ah_pack = thread_obroadcast( thread, &ah_pack_s );
// Initialize pack objects that are passed into packm_init() for A and C.
if( thread_am_ichief( thread ) ) {
bli_obj_init_pack( &a1_pack_s );
bli_obj_init_pack( &c1_pack_s );
}
a1_pack = thread_ibroadcast( thread, &a1_pack_s );
c1_pack = thread_ibroadcast( thread, &c1_pack_s );
// Pack A' (if instructed).
bli_packm_int( ah, ah_pack,
cntl_sub_packm_b( cntl ),
herk_thread_sub_opackm( thread ) );
dim_t my_start, my_end;
bli_get_range_weighted_t2b( thread, c,
bli_blksz_get_mult_for_obj( a, cntl_blocksize( cntl ) ),
&my_start, &my_end );
// Partition along the m dimension.
for ( i = my_start; i < my_end; i += b_alg )
{
// Determine the current algorithmic blocksize.
b_alg = bli_determine_blocksize_f( i, my_end, a,
cntl_blocksize( cntl ) );
// Acquire partitions for A1 and C1.
bli_acquire_mpart_t2b( BLIS_SUBPART1,
i, b_alg, a, &a1 );
bli_acquire_mpart_t2b( BLIS_SUBPART1,
i, b_alg, c, &c1 );
// Initialize objects for packing A1 and C1.
if( thread_am_ichief( thread ) ) {
bli_packm_init( &a1, a1_pack,
cntl_sub_packm_a( cntl ) );
bli_packm_init( &c1, c1_pack,
cntl_sub_packm_c( cntl ) );
}
thread_ibarrier( thread );
// Pack A1 (if instructed).
bli_packm_int( &a1, a1_pack,
cntl_sub_packm_a( cntl ),
herk_thread_sub_ipackm( thread ) );
// Pack C1 (if instructed).
bli_packm_int( &c1, c1_pack,
cntl_sub_packm_c( cntl ),
herk_thread_sub_ipackm( thread ) );
// Perform herk subproblem.
bli_herk_int( &BLIS_ONE,
a1_pack,
ah_pack,
&BLIS_ONE,
c1_pack,
cntl_sub_gemm( cntl ),
herk_thread_sub_herk( thread ) );
thread_ibarrier( thread );
// Unpack C1 (if C1 was packed).
bli_unpackm_int( c1_pack, &c1,
cntl_sub_unpackm_c( cntl ),
herk_thread_sub_ipackm( thread ) );
}
// If any packing buffers were acquired within packm, release them back
// to the memory manager.
thread_obarrier( thread );
if( thread_am_ochief( thread ) )
bli_packm_release( ah_pack, cntl_sub_packm_b( cntl ) );
if( thread_am_ichief( thread ) ) {
bli_packm_release( a1_pack, cntl_sub_packm_a( cntl ) );
bli_packm_release( c1_pack, cntl_sub_packm_c( cntl ) );
}
}
void bli_hemv_blk_var1( conj_t conjh,
obj_t* alpha,
obj_t* a,
obj_t* x,
obj_t* beta,
obj_t* y,
cntx_t* cntx,
hemv_t* cntl )
{
obj_t a11, a11_pack;
obj_t a10;
obj_t x1, x1_pack;
obj_t x0;
obj_t y1, y1_pack;
obj_t y0;
dim_t mn;
dim_t ij;
dim_t b_alg;
// Even though this blocked algorithm is expressed only in terms of the
// lower triangular case, the upper triangular case is still supported:
// when bli_acquire_mpart_tl2br() is passed a matrix that is stored in
// in the upper triangle, and the requested subpartition resides in the
// lower triangle (as is the case for this algorithm), the routine fills
// the request as if the caller had actually requested the corresponding
// "mirror" subpartition in the upper triangle, except that it marks the
// subpartition for transposition (and conjugation).
// Initialize objects for packing.
bli_obj_init_pack( &a11_pack );
bli_obj_init_pack( &x1_pack );
bli_obj_init_pack( &y1_pack );
// Query dimension.
mn = bli_obj_length( a );
// y = beta * y;
bli_scalv_int( beta,
y,
cntx, bli_cntl_sub_scalv( cntl ) );
// Partition diagonally.
for ( ij = 0; ij < mn; ij += b_alg )
{
// Determine the current algorithmic blocksize.
b_alg = bli_determine_blocksize_f( ij, mn, a,
bli_cntl_bszid( cntl ), cntx );
// Acquire partitions for A11, A10, x1, x0, y1, and y0.
bli_acquire_mpart_tl2br( BLIS_SUBPART11,
ij, b_alg, a, &a11 );
bli_acquire_mpart_tl2br( BLIS_SUBPART10,
ij, b_alg, a, &a10 );
bli_acquire_vpart_f2b( BLIS_SUBPART1,
ij, b_alg, x, &x1 );
bli_acquire_vpart_f2b( BLIS_SUBPART0,
ij, b_alg, x, &x0 );
bli_acquire_vpart_f2b( BLIS_SUBPART1,
ij, b_alg, y, &y1 );
bli_acquire_vpart_f2b( BLIS_SUBPART0,
ij, b_alg, y, &y0 );
// Initialize objects for packing A11, x1, and y1 (if needed).
bli_packm_init( &a11, &a11_pack,
cntx, bli_cntl_sub_packm_a11( cntl ) );
bli_packv_init( &x1, &x1_pack,
cntx, bli_cntl_sub_packv_x1( cntl ) );
bli_packv_init( &y1, &y1_pack,
cntx, bli_cntl_sub_packv_y1( cntl ) );
// Copy/pack A11, x1, y1 (if needed).
bli_packm_int( &a11, &a11_pack,
cntx, bli_cntl_sub_packm_a11( cntl ),
&BLIS_PACKM_SINGLE_THREADED );
bli_packv_int( &x1, &x1_pack,
cntx, bli_cntl_sub_packv_x1( cntl ) );
bli_packv_int( &y1, &y1_pack,
cntx, bli_cntl_sub_packv_y1( cntl ) );
// y0 = y0 + alpha * A10' * x1;
bli_gemv_int( bli_apply_conj( conjh, BLIS_TRANSPOSE ),
BLIS_NO_CONJUGATE,
alpha,
&a10,
&x1_pack,
&BLIS_ONE,
&y0,
cntx,
bli_cntl_sub_gemv_t_rp( cntl ) );
// y1 = y1 + alpha * A11 * x1;
bli_hemv_int( conjh,
alpha,
&a11_pack,
&x1_pack,
&BLIS_ONE,
&y1_pack,
cntx,
bli_cntl_sub_hemv( cntl ) );
// y1 = y1 + alpha * A10 * x0;
bli_gemv_int( BLIS_NO_TRANSPOSE,
BLIS_NO_CONJUGATE,
alpha,
&a10,
&x0,
&BLIS_ONE,
&y1_pack,
cntx,
bli_cntl_sub_gemv_n_rp( cntl ) );
// Copy/unpack y1 (if y1 was packed).
bli_unpackv_int( &y1_pack, &y1,
cntx, bli_cntl_sub_unpackv_y1( cntl ) );
}
// If any packing buffers were acquired within packm, release them back
// to the memory manager.
bli_packm_release( &a11_pack, bli_cntl_sub_packm_a11( cntl ) );
bli_packv_release( &x1_pack, bli_cntl_sub_packv_x1( cntl ) );
bli_packv_release( &y1_pack, bli_cntl_sub_packv_y1( cntl ) );
}
void bli_trsm_blk_var2b( obj_t* a,
obj_t* b,
obj_t* c,
trsm_t* cntl,
trsm_thrinfo_t* thread )
{
obj_t a_pack_s;
obj_t b1_pack_s, c1_pack_s;
obj_t b1, c1;
obj_t* a_pack = NULL;
obj_t* b1_pack = NULL;
obj_t* c1_pack = NULL;
dim_t i;
dim_t b_alg;
dim_t n_trans;
// Initialize pack objects for A that are passed into packm_init().
if( thread_am_ochief( thread ) ) {
bli_obj_init_pack( &a_pack_s );
// Initialize object for packing A.
bli_packm_init( a, &a_pack_s,
cntl_sub_packm_a( cntl ) );
// Scale C by beta (if instructed).
bli_scalm_int( &BLIS_ONE,
c,
cntl_sub_scalm( cntl ) );
}
a_pack = thread_obroadcast( thread, &a_pack_s );
// Initialize pack objects for B and C that are passed into packm_init().
if( thread_am_ichief( thread ) ) {
bli_obj_init_pack( &b1_pack_s );
bli_obj_init_pack( &c1_pack_s );
}
b1_pack = thread_ibroadcast( thread, &b1_pack_s );
c1_pack = thread_ibroadcast( thread, &c1_pack_s );
// Pack A (if instructed).
bli_packm_int( a, a_pack,
cntl_sub_packm_a( cntl ),
trmm_thread_sub_opackm( thread ) );
// Query dimension in partitioning direction.
n_trans = bli_obj_width_after_trans( *b );
dim_t start, end;
num_t dt = bli_obj_execution_datatype( *a );
bli_get_range_r2l( thread, 0, n_trans,
//bli_lcm( bli_info_get_default_nr( BLIS_TRSM, dt ),
// bli_info_get_default_mr( BLIS_TRSM, dt ) ),
bli_lcm( bli_blksz_get_nr( dt, cntl_blocksize( cntl ) ),
bli_blksz_get_mr( dt, cntl_blocksize( cntl ) ) ),
&start, &end );
// Partition along the n dimension.
for ( i = start; i < end; i += b_alg )
{
// Determine the current algorithmic blocksize.
b_alg = bli_determine_blocksize_b( i, end, b,
cntl_blocksize( cntl ) );
// Acquire partitions for B1 and C1.
bli_acquire_mpart_r2l( BLIS_SUBPART1,
i, b_alg, b, &b1 );
bli_acquire_mpart_r2l( BLIS_SUBPART1,
i, b_alg, c, &c1 );
// Initialize objects for packing A1 and B1.
if( thread_am_ichief( thread ) ) {
bli_packm_init( &b1, b1_pack,
cntl_sub_packm_b( cntl ) );
bli_packm_init( &c1, c1_pack,
cntl_sub_packm_c( cntl ) );
}
thread_ibarrier( thread );
// Pack B1 (if instructed).
bli_packm_int( &b1, b1_pack,
cntl_sub_packm_b( cntl ),
trsm_thread_sub_ipackm( thread ) );
// Pack C1 (if instructed).
bli_packm_int( &c1, c1_pack,
cntl_sub_packm_c( cntl ),
trsm_thread_sub_ipackm( thread ) );
// Perform trsm subproblem.
bli_trsm_int( &BLIS_ONE,
a_pack,
b1_pack,
&BLIS_ONE,
c1_pack,
cntl_sub_trsm( cntl ),
trsm_thread_sub_trsm( thread ) );
thread_ibarrier( thread );
// Unpack C1 (if C1 was packed).
bli_unpackm_int( c1_pack, &c1,
cntl_sub_unpackm_c( cntl ),
trsm_thread_sub_ipackm( thread ) );
}
// If any packing buffers were acquired within packm, release them back
// to the memory manager.
thread_obarrier( thread );
if( thread_am_ochief( thread ) )
bli_packm_release( a_pack, cntl_sub_packm_a( cntl ) );
if( thread_am_ichief( thread ) ) {
bli_packm_release( b1_pack, cntl_sub_packm_b( cntl ) );
bli_packm_release( c1_pack, cntl_sub_packm_c( cntl ) );
}
}
void bli_gemv_blk_var2( obj_t* alpha,
obj_t* a,
obj_t* x,
obj_t* beta,
obj_t* y,
cntx_t* cntx,
gemv_t* cntl )
{
obj_t a1, a1_pack;
obj_t x1, x1_pack;
dim_t n_trans;
dim_t i;
dim_t b_alg;
// Initialize objects for packing.
bli_obj_init_pack( &a1_pack );
bli_obj_init_pack( &x1_pack );
// Query dimension in partitioning direction.
n_trans = bli_obj_width_after_trans( a );
// y = beta * y;
bli_scalv_int( beta,
y,
cntx, bli_cntl_sub_scalv( cntl ) );
// Partition along the "k" dimension (n dimension of A).
for ( i = 0; i < n_trans; i += b_alg )
{
// Determine the current algorithmic blocksize.
b_alg = bli_determine_blocksize_f( i, n_trans, a,
bli_cntl_bszid( cntl ), cntx );
// Acquire partitions for A1 and x1.
bli_acquire_mpart_l2r( BLIS_SUBPART1,
i, b_alg, a, &a1 );
bli_acquire_vpart_f2b( BLIS_SUBPART1,
i, b_alg, x, &x1 );
// Initialize objects for packing A1 and x1 (if needed).
bli_packm_init( &a1, &a1_pack,
cntx, bli_cntl_sub_packm_a( cntl ) );
bli_packv_init( &x1, &x1_pack,
cntx, bli_cntl_sub_packv_x( cntl ) );
// Copy/pack A1, x1 (if needed).
bli_packm_int( &a1, &a1_pack,
cntx, bli_cntl_sub_packm_a( cntl ),
&BLIS_PACKM_SINGLE_THREADED );
bli_packv_int( &x1, &x1_pack,
cntx, bli_cntl_sub_packv_x( cntl ) );
// y = y + alpha * A1 * x1;
bli_gemv_int( BLIS_NO_TRANSPOSE,
BLIS_NO_CONJUGATE,
alpha,
&a1_pack,
&x1_pack,
&BLIS_ONE,
y,
cntx,
bli_cntl_sub_gemv( cntl ) );
}
// If any packing buffers were acquired within packm, release them back
// to the memory manager.
bli_packm_release( &a1_pack, bli_cntl_sub_packm_a( cntl ) );
bli_packv_release( &x1_pack, bli_cntl_sub_packv_x( cntl ) );
}
void bli_trmm_lu_blk_var4( obj_t* alpha,
obj_t* a,
obj_t* b,
obj_t* beta,
obj_t* c,
trmm_t* cntl )
{
obj_t a1, a1_pack;
obj_t b_pack;
obj_t c1, c1_pack;
dim_t i;
dim_t bm_alg;
dim_t mT_trans;
// Initialize all pack objects that are passed into packm_init().
bli_obj_init_pack( &a1_pack );
bli_obj_init_pack( &b_pack );
bli_obj_init_pack( &c1_pack );
// Query dimension in partitioning direction. Use the diagonal offset
// to stop short of the zero region.
mT_trans = bli_abs( bli_obj_diag_offset_after_trans( *a ) ) +
bli_obj_width_after_trans( *a );
// Scale C by beta (if instructed).
bli_scalm_int( beta,
c,
cntl_sub_scalm( cntl ) );
// Initialize object for packing B.
bli_packm_init( b, &b_pack,
cntl_sub_packm_b( cntl ) );
// Fuse the first iteration with incremental packing and computation.
{
obj_t b_inc, b_pack_inc;
obj_t c1_pack_inc;
dim_t j;
dim_t bn_inc;
dim_t n_trans;
// Query dimension in partitioning direction.
n_trans = bli_obj_width( b_pack );
// Determine the current algorithmic blocksize.
bm_alg = bli_determine_blocksize_f( 0, mT_trans, a,
cntl_blocksize( cntl ) );
// Acquire partitions for A1 and C1.
bli_acquire_mpart_t2b( BLIS_SUBPART1,
0, bm_alg, a, &a1 );
bli_acquire_mpart_t2b( BLIS_SUBPART1,
0, bm_alg, c, &c1 );
// Initialize objects for packing A1 and C1.
bli_packm_init( &a1, &a1_pack, cntl_sub_packm_a( cntl ) );
bli_packm_init( &c1, &c1_pack, cntl_sub_packm_c( cntl ) );
// Pack A1 and scale by alpha (if instructed).
bli_packm_int( alpha, &a1, &a1_pack, cntl_sub_packm_a( cntl ) );
// Pack C1 and scale by beta (if instructed).
bli_packm_int( beta, &c1, &c1_pack, cntl_sub_packm_c( cntl ) );
// Partition along the n dimension.
for ( j = 0; j < n_trans; j += bn_inc )
{
// Determine the current incremental packing blocksize.
bn_inc = bli_determine_blocksize_f( j, n_trans, b,
cntl_blocksize_aux( cntl ) );
// Acquire partitions.
bli_acquire_mpart_l2r( BLIS_SUBPART1,
j, bn_inc, b, &b_inc );
bli_acquire_mpart_l2r( BLIS_SUBPART1,
j, bn_inc, &b_pack, &b_pack_inc );
bli_acquire_mpart_l2r( BLIS_SUBPART1,
j, bn_inc, &c1_pack, &c1_pack_inc );
// Pack B1 and scale by alpha (if instructed).
bli_packm_int( alpha, &b_inc, &b_pack_inc, cntl_sub_packm_b( cntl ) );
// Perform trmm subproblem.
bli_trmm_int( BLIS_LEFT,
alpha,
&a1_pack,
&b_pack_inc,
beta,
&c1_pack_inc,
cntl_sub_trmm( cntl ) );
}
// Unpack C1 (if C1 was packed).
bli_unpackm_int( &c1_pack, &c1, cntl_sub_unpackm_c( cntl ) );
}
// Partition along the remaining portion of the m dimension.
for ( i = bm_alg; i < mT_trans; i += bm_alg )
{
// Determine the current algorithmic blocksize.
bm_alg = bli_determine_blocksize_f( i, mT_trans, a,
cntl_blocksize( cntl ) );
// Acquire partitions for A1 and C1.
bli_acquire_mpart_t2b( BLIS_SUBPART1,
i, bm_alg, a, &a1 );
bli_acquire_mpart_t2b( BLIS_SUBPART1,
i, bm_alg, c, &c1 );
// Initialize objects for packing A1 and C1.
bli_packm_init( &a1, &a1_pack,
cntl_sub_packm_a( cntl ) );
bli_packm_init( &c1, &c1_pack,
cntl_sub_packm_c( cntl ) );
// Pack A1 and scale by alpha (if instructed).
bli_packm_int( alpha,
&a1, &a1_pack,
cntl_sub_packm_a( cntl ) );
// Pack C1 and scale by beta (if instructed).
bli_packm_int( beta,
&c1, &c1_pack,
cntl_sub_packm_c( cntl ) );
// Perform trmm subproblem.
if ( bli_obj_intersects_diag( a1_pack ) )
bli_trmm_int( BLIS_LEFT,
alpha,
&a1_pack,
&b_pack,
beta,
&c1_pack,
cntl_sub_trmm( cntl ) );
else
bli_gemm_int( alpha,
&a1_pack,
&b_pack,
&BLIS_ONE,
&c1_pack,
cntl_sub_gemm( cntl ) );
// Unpack C1 (if C1 was packed).
bli_unpackm_int( &c1_pack, &c1,
cntl_sub_unpackm_c( cntl ) );
}
// If any packing buffers were acquired within packm, release them back
// to the memory manager.
bli_obj_release_pack( &a1_pack );
bli_obj_release_pack( &b_pack );
bli_obj_release_pack( &c1_pack );
}
void bli_trmv_l_blk_var2( obj_t* alpha,
obj_t* a,
obj_t* x,
trmv_t* cntl )
{
obj_t a11, a11_pack;
obj_t a21;
obj_t x1, x1_pack;
obj_t x2;
dim_t mn;
dim_t ij;
dim_t b_alg;
// Initialize objects for packing.
bli_obj_init_pack( &a11_pack );
bli_obj_init_pack( &x1_pack );
// Query dimension.
mn = bli_obj_length( *a );
// Partition diagonally.
for ( ij = 0; ij < mn; ij += b_alg )
{
// Determine the current algorithmic blocksize.
b_alg = bli_determine_blocksize_b( ij, mn, a,
cntl_blocksize( cntl ) );
// Acquire partitions for A11, A21, x1, and x2.
bli_acquire_mpart_br2tl( BLIS_SUBPART11,
ij, b_alg, a, &a11 );
bli_acquire_mpart_br2tl( BLIS_SUBPART21,
ij, b_alg, a, &a21 );
bli_acquire_vpart_b2f( BLIS_SUBPART1,
ij, b_alg, x, &x1 );
bli_acquire_vpart_b2f( BLIS_SUBPART2,
ij, b_alg, x, &x2 );
// Initialize objects for packing A11 and x1 (if needed).
bli_packm_init( &a11, &a11_pack,
cntl_sub_packm_a11( cntl ) );
bli_packv_init( &x1, &x1_pack,
cntl_sub_packv_x1( cntl ) );
// Copy/pack A11, x1 (if needed).
bli_packm_int( &a11, &a11_pack,
cntl_sub_packm_a11( cntl ),
&BLIS_PACKM_SINGLE_THREADED );
bli_packv_int( &x1, &x1_pack,
cntl_sub_packv_x1( cntl ) );
// x2 = x2 + alpha * A21 * x1;
bli_gemv_int( BLIS_NO_TRANSPOSE,
BLIS_NO_CONJUGATE,
alpha,
&a21,
&x1_pack,
&BLIS_ONE,
&x2,
cntl_sub_gemv_cp( cntl ) );
// x1 = alpha * tril( A11 ) * x1;
bli_trmv_int( alpha,
&a11_pack,
&x1_pack,
cntl_sub_trmv( cntl ) );
// Copy/unpack x1 (if x1 was packed).
bli_unpackv_int( &x1_pack, &x1,
cntl_sub_unpackv_x1( cntl ) );
}
// If any packing buffers were acquired within packm, release them back
// to the memory manager.
bli_obj_release_pack( &a11_pack );
bli_obj_release_pack( &x1_pack );
}
void bli_herk_blk_var2f( obj_t* a,
obj_t* ah,
obj_t* c,
gemm_t* cntl,
herk_thrinfo_t* thread )
{
obj_t a_pack_s;
obj_t ah1_pack_s, c1S_pack_s;
obj_t ah1, c1, c1S;
obj_t aS_pack;
obj_t* a_pack;
obj_t* ah1_pack;
obj_t* c1S_pack;
dim_t i;
dim_t b_alg;
dim_t n_trans;
subpart_t stored_part;
// The upper and lower variants are identical, except for which
// merged subpartition is acquired in the loop body.
if ( bli_obj_is_lower( *c ) ) stored_part = BLIS_SUBPART1B;
else stored_part = BLIS_SUBPART1T;
if( thread_am_ochief( thread ) ) {
// Initialize object for packing A
bli_obj_init_pack( &a_pack_s );
bli_packm_init( a, &a_pack_s,
cntl_sub_packm_a( cntl ) );
// Scale C by beta (if instructed).
bli_scalm_int( &BLIS_ONE,
c,
cntl_sub_scalm( cntl ) );
}
a_pack = thread_obroadcast( thread, &a_pack_s );
// Initialize pack objects for C and A' that are passed into packm_init().
if( thread_am_ichief( thread ) ) {
bli_obj_init_pack( &ah1_pack_s );
bli_obj_init_pack( &c1S_pack_s );
}
ah1_pack = thread_ibroadcast( thread, &ah1_pack_s );
c1S_pack = thread_ibroadcast( thread, &c1S_pack_s );
// Pack A (if instructed).
bli_packm_int( a, a_pack,
cntl_sub_packm_a( cntl ),
herk_thread_sub_opackm( thread ) );
// Query dimension in partitioning direction.
n_trans = bli_obj_width_after_trans( *c );
dim_t start, end;
// Needs to be replaced with a weighted range because triangle
bli_get_range_weighted( thread, 0, n_trans,
bli_blksz_get_mult_for_obj( a, cntl_blocksize( cntl ) ),
bli_obj_is_lower( *c ), &start, &end );
// Partition along the n dimension.
for ( i = start; i < end; i += b_alg )
{
// Determine the current algorithmic blocksize.
b_alg = bli_determine_blocksize_f( i, end, a,
cntl_blocksize( cntl ) );
// Acquire partitions for A1' and C1.
bli_acquire_mpart_l2r( BLIS_SUBPART1,
i, b_alg, ah, &ah1 );
bli_acquire_mpart_l2r( BLIS_SUBPART1,
i, b_alg, c, &c1 );
// Partition off the stored region of C1 and the corresponding region
// of A_pack.
bli_acquire_mpart_t2b( stored_part,
i, b_alg, &c1, &c1S );
bli_acquire_mpart_t2b( stored_part,
i, b_alg, a_pack, &aS_pack );
// Initialize objects for packing A1' and C1.
if( thread_am_ichief( thread ) ) {
bli_packm_init( &ah1, ah1_pack,
cntl_sub_packm_b( cntl ) );
bli_packm_init( &c1S, c1S_pack,
cntl_sub_packm_c( cntl ) );
}
thread_ibarrier( thread ) ;
// Pack A1' (if instructed).
bli_packm_int( &ah1, ah1_pack,
cntl_sub_packm_b( cntl ),
herk_thread_sub_ipackm( thread ) );
// Pack C1 (if instructed).
bli_packm_int( &c1S, c1S_pack,
cntl_sub_packm_c( cntl ),
herk_thread_sub_ipackm( thread ) ) ;
// Perform herk subproblem.
bli_herk_int( &BLIS_ONE,
&aS_pack,
ah1_pack,
&BLIS_ONE,
c1S_pack,
cntl_sub_gemm( cntl ),
herk_thread_sub_herk( thread ) );
thread_ibarrier( thread );
// Unpack C1 (if C1 was packed).
bli_unpackm_int( c1S_pack, &c1S,
cntl_sub_unpackm_c( cntl ),
herk_thread_sub_ipackm( thread ) );
}
// If any packing buffers were acquired within packm, release them back
// to the memory manager.
thread_obarrier( thread );
if( thread_am_ochief( thread ) )
bli_packm_release( a_pack, cntl_sub_packm_a( cntl ) );
if( thread_am_ichief( thread ) ) {
bli_packm_release( ah1_pack, cntl_sub_packm_b( cntl ) );
bli_packm_release( c1S_pack, cntl_sub_packm_c( cntl ) );
}
}