예제 #1
0
파일: fsync.c 프로젝트: 710leo/LVS
int ext4_sync_file(struct file *file, struct dentry *dentry, int datasync)
{
	struct inode *inode = dentry->d_inode;
	struct ext4_inode_info *ei = EXT4_I(inode);
	journal_t *journal = EXT4_SB(inode->i_sb)->s_journal;
	int ret;
	tid_t commit_tid;

	J_ASSERT(ext4_journal_current_handle() == NULL);

	trace_ext4_sync_file(file, dentry, datasync);

	if (inode->i_sb->s_flags & MS_RDONLY)
		return 0;

	ret = flush_aio_dio_completed_IO(inode);
	if (ret < 0)
		return ret;

	if (!journal)
		return simple_fsync(file, dentry, datasync);

	/*
	 * data=writeback,ordered:
	 *  The caller's filemap_fdatawrite()/wait will sync the data.
	 *  Metadata is in the journal, we wait for proper transaction to
	 *  commit here.
	 *
	 * data=journal:
	 *  filemap_fdatawrite won't do anything (the buffers are clean).
	 *  ext4_force_commit will write the file data into the journal and
	 *  will wait on that.
	 *  filemap_fdatawait() will encounter a ton of newly-dirtied pages
	 *  (they were dirtied by commit).  But that's OK - the blocks are
	 *  safe in-journal, which is all fsync() needs to ensure.
	 */
	if (ext4_should_journal_data(inode))
		return ext4_force_commit(inode->i_sb);

	commit_tid = datasync ? ei->i_datasync_tid : ei->i_sync_tid;
	if (jbd2_log_start_commit(journal, commit_tid)) {
		/*
		 * When the journal is on a different device than the
		 * fs data disk, we need to issue the barrier in
		 * writeback mode.  (In ordered mode, the jbd2 layer
		 * will take care of issuing the barrier.  In
		 * data=journal, all of the data blocks are written to
		 * the journal device.)
		 */
		if (ext4_should_writeback_data(inode) &&
		    (journal->j_fs_dev != journal->j_dev) &&
		    (journal->j_flags & JBD2_BARRIER))
			blkdev_issue_flush(inode->i_sb->s_bdev, NULL);
		ret = jbd2_log_wait_commit(journal, commit_tid);
	} else if (journal->j_flags & JBD2_BARRIER)
		blkdev_issue_flush(inode->i_sb->s_bdev, NULL);
	return ret;
}
예제 #2
0
int ext3_sync_file(struct file *file, loff_t start, loff_t end, int datasync)
{
	struct inode *inode = file->f_mapping->host;
	struct ext3_inode_info *ei = EXT3_I(inode);
	journal_t *journal = EXT3_SB(inode->i_sb)->s_journal;
	int ret, needs_barrier = 0;
	tid_t commit_tid;

	trace_ext3_sync_file_enter(file, datasync);

	if (inode->i_sb->s_flags & MS_RDONLY)
		return 0;

	ret = filemap_write_and_wait_range(inode->i_mapping, start, end);
	if (ret)
		goto out;

	J_ASSERT(ext3_journal_current_handle() == NULL);

	/*
	 * data=writeback,ordered:
	 *  The caller's filemap_fdatawrite()/wait will sync the data.
	 *  Metadata is in the journal, we wait for a proper transaction
	 *  to commit here.
	 *
	 * data=journal:
	 *  filemap_fdatawrite won't do anything (the buffers are clean).
	 *  ext3_force_commit will write the file data into the journal and
	 *  will wait on that.
	 *  filemap_fdatawait() will encounter a ton of newly-dirtied pages
	 *  (they were dirtied by commit).  But that's OK - the blocks are
	 *  safe in-journal, which is all fsync() needs to ensure.
	 */
	if (ext3_should_journal_data(inode)) {
		ret = ext3_force_commit(inode->i_sb);
		goto out;
	}

	if (datasync)
		commit_tid = atomic_read(&ei->i_datasync_tid);
	else
		commit_tid = atomic_read(&ei->i_sync_tid);

	if (test_opt(inode->i_sb, BARRIER) &&
	    !journal_trans_will_send_data_barrier(journal, commit_tid))
		needs_barrier = 1;
	log_start_commit(journal, commit_tid);
	ret = log_wait_commit(journal, commit_tid);

	/*
	 * In case we didn't commit a transaction, we have to flush
	 * disk caches manually so that data really is on persistent
	 * storage
	 */
	if (needs_barrier)
		blkdev_issue_flush(inode->i_sb->s_bdev, GFP_KERNEL, NULL);
out:
	trace_ext3_sync_file_exit(inode, ret);
	return ret;
}
예제 #3
0
파일: checkpoint.c 프로젝트: 020gzh/linux
int jbd2_cleanup_journal_tail(journal_t *journal)
{
	tid_t		first_tid;
	unsigned long	blocknr;

	if (is_journal_aborted(journal))
		return -EIO;

	if (!jbd2_journal_get_log_tail(journal, &first_tid, &blocknr))
		return 1;
	J_ASSERT(blocknr != 0);

	/*
	 * We need to make sure that any blocks that were recently written out
	 * --- perhaps by jbd2_log_do_checkpoint() --- are flushed out before
	 * we drop the transactions from the journal. It's unlikely this will
	 * be necessary, especially with an appropriately sized journal, but we
	 * need this to guarantee correctness.  Fortunately
	 * jbd2_cleanup_journal_tail() doesn't get called all that often.
	 */
	if (journal->j_flags & JBD2_BARRIER)
		blkdev_issue_flush(journal->j_fs_dev, GFP_NOFS, NULL);

	return __jbd2_update_log_tail(journal, first_tid, blocknr);
}
예제 #4
0
int jbd2_cleanup_journal_tail(journal_t *journal)
{
	tid_t		first_tid;
	unsigned long	blocknr;

	if (is_journal_aborted(journal))
		return 1;

	if (!jbd2_journal_get_log_tail(journal, &first_tid, &blocknr))
		return 1;
	J_ASSERT(blocknr != 0);

	/*
                                                                       
                                                                      
                                                                      
                                                                        
                                                    
                                                                  
  */
	if (journal->j_flags & JBD2_BARRIER)
		blkdev_issue_flush(journal->j_fs_dev, GFP_KERNEL, NULL);

	__jbd2_update_log_tail(journal, first_tid, blocknr);
	return 0;
}
예제 #5
0
int ext3_sync_file(struct file * file, struct dentry *dentry, int datasync)
{
	struct inode *inode = dentry->d_inode;
	int ret = 0;

	J_ASSERT(ext3_journal_current_handle() == 0);

	/*
	 * data=writeback:
	 *  The caller's filemap_fdatawrite()/wait will sync the data.
	 *  sync_inode() will sync the metadata
	 *
	 * data=ordered:
	 *  The caller's filemap_fdatawrite() will write the data and
	 *  sync_inode() will write the inode if it is dirty.  Then the caller's
	 *  filemap_fdatawait() will wait on the pages.
	 *
	 * data=journal:
	 *  filemap_fdatawrite won't do anything (the buffers are clean).
	 *  ext3_force_commit will write the file data into the journal and
	 *  will wait on that.
	 *  filemap_fdatawait() will encounter a ton of newly-dirtied pages
	 *  (they were dirtied by commit).  But that's OK - the blocks are
	 *  safe in-journal, which is all fsync() needs to ensure.
	 */
	if (ext3_should_journal_data(inode)) {
		ret = ext3_force_commit(inode->i_sb);
		goto out;
	}

	if (datasync && !(inode->i_state & I_DIRTY_DATASYNC))
		goto flush;

	/*
	 * The VFS has written the file data.  If the inode is unaltered
	 * then we need not start a commit.
	 */
	if (inode->i_state & (I_DIRTY_SYNC|I_DIRTY_DATASYNC)) {
		struct writeback_control wbc = {
			.sync_mode = WB_SYNC_ALL,
			.nr_to_write = 0, /* sys_fsync did this */
		};
		ret = sync_inode(inode, &wbc);
		goto out;
	}
flush:
	/*
	 * In case we didn't commit a transaction, we have to flush
	 * disk caches manually so that data really is on persistent
	 * storage
	 */
	if (test_opt(inode->i_sb, BARRIER))
		blkdev_issue_flush(inode->i_sb->s_bdev, NULL);
out:
	return ret;
}
예제 #6
0
int ext4_sync_file(struct file *file, int datasync)
{
    struct inode *inode = file->f_mapping->host;
    struct ext4_inode_info *ei = EXT4_I(inode);
    journal_t *journal = EXT4_SB(inode->i_sb)->s_journal;
    int ret;
    tid_t commit_tid;
    bool needs_barrier = false;

    J_ASSERT(ext4_journal_current_handle() == NULL);

    trace_ext4_sync_file(file, datasync);

    if (inode->i_sb->s_flags & MS_RDONLY)
        return 0;

    ret = flush_completed_IO(inode);
    if (ret < 0)
        return ret;

    if (!journal) {
        ret = generic_file_fsync(file, datasync);
        if (!ret && !list_empty(&inode->i_dentry))
            ext4_sync_parent(inode);
        return ret;
    }

    /*
     * data=writeback,ordered:
     *  The caller's filemap_fdatawrite()/wait will sync the data.
     *  Metadata is in the journal, we wait for proper transaction to
     *  commit here.
     *
     * data=journal:
     *  filemap_fdatawrite won't do anything (the buffers are clean).
     *  ext4_force_commit will write the file data into the journal and
     *  will wait on that.
     *  filemap_fdatawait() will encounter a ton of newly-dirtied pages
     *  (they were dirtied by commit).  But that's OK - the blocks are
     *  safe in-journal, which is all fsync() needs to ensure.
     */
    if (ext4_should_journal_data(inode))
        return ext4_force_commit(inode->i_sb);

    commit_tid = datasync ? ei->i_datasync_tid : ei->i_sync_tid;
    if (journal->j_flags & JBD2_BARRIER &&
            !jbd2_trans_will_send_data_barrier(journal, commit_tid))
        needs_barrier = true;
    jbd2_log_start_commit(journal, commit_tid);
    ret = jbd2_log_wait_commit(journal, commit_tid);
    if (needs_barrier)
        blkdev_issue_flush(inode->i_sb->s_bdev, GFP_KERNEL, NULL,
                           BLKDEV_IFL_WAIT);

    return ret;
}
예제 #7
0
int ext4_sync_file(struct file *file, struct dentry *dentry, int datasync)
{
	struct inode *inode = dentry->d_inode;
	journal_t *journal = EXT4_SB(inode->i_sb)->s_journal;
	int ret = 0;

	J_ASSERT(ext4_journal_current_handle() == NULL);

	trace_mark(ext4_sync_file, "dev %s datasync %d ino %ld parent %ld",
		   inode->i_sb->s_id, datasync, inode->i_ino,
		   dentry->d_parent->d_inode->i_ino);

	/*
	 * data=writeback:
	 *  The caller's filemap_fdatawrite()/wait will sync the data.
	 *  sync_inode() will sync the metadata
	 *
	 * data=ordered:
	 *  The caller's filemap_fdatawrite() will write the data and
	 *  sync_inode() will write the inode if it is dirty.  Then the caller's
	 *  filemap_fdatawait() will wait on the pages.
	 *
	 * data=journal:
	 *  filemap_fdatawrite won't do anything (the buffers are clean).
	 *  ext4_force_commit will write the file data into the journal and
	 *  will wait on that.
	 *  filemap_fdatawait() will encounter a ton of newly-dirtied pages
	 *  (they were dirtied by commit).  But that's OK - the blocks are
	 *  safe in-journal, which is all fsync() needs to ensure.
	 */
	if (ext4_should_journal_data(inode)) {
		ret = ext4_force_commit(inode->i_sb);
		goto out;
	}

	if (datasync && !(inode->i_state & I_DIRTY_DATASYNC))
		goto out;

	/*
	 * The VFS has written the file data.  If the inode is unaltered
	 * then we need not start a commit.
	 */
	if (inode->i_state & (I_DIRTY_SYNC|I_DIRTY_DATASYNC)) {
		struct writeback_control wbc = {
			.sync_mode = WB_SYNC_ALL,
			.nr_to_write = 0, /* sys_fsync did this */
		};
		ret = sync_inode(inode, &wbc);
		if (journal && (journal->j_flags & JBD2_BARRIER))
			blkdev_issue_flush(inode->i_sb->s_bdev, NULL);
	}
out:
	return ret;
}
예제 #8
0
int ext3_sync_file(struct file * file, struct dentry *dentry, int datasync)
{
	struct inode *inode = dentry->d_inode;
	struct ext3_inode_info *ei = EXT3_I(inode);
	journal_t *journal = EXT3_SB(inode->i_sb)->s_journal;
	int ret = 0;
	tid_t commit_tid;

	if (inode->i_sb->s_flags & MS_RDONLY)
		return 0;

	J_ASSERT(ext3_journal_current_handle() == NULL);

	/*
	 * data=writeback,ordered:
	 *  The caller's filemap_fdatawrite()/wait will sync the data.
	 *  Metadata is in the journal, we wait for a proper transaction
	 *  to commit here.
	 *
	 * data=journal:
	 *  filemap_fdatawrite won't do anything (the buffers are clean).
	 *  ext3_force_commit will write the file data into the journal and
	 *  will wait on that.
	 *  filemap_fdatawait() will encounter a ton of newly-dirtied pages
	 *  (they were dirtied by commit).  But that's OK - the blocks are
	 *  safe in-journal, which is all fsync() needs to ensure.
	 */
	if (ext3_should_journal_data(inode)) {
		ret = ext3_force_commit(inode->i_sb);
		goto out;
	}

	if (datasync)
		commit_tid = atomic_read(&ei->i_datasync_tid);
	else
		commit_tid = atomic_read(&ei->i_sync_tid);

	if (log_start_commit(journal, commit_tid)) {
		log_wait_commit(journal, commit_tid);
		goto out;
	}

	/*
	 * In case we didn't commit a transaction, we have to flush
	 * disk caches manually so that data really is on persistent
	 * storage
	 */
	if (test_opt(inode->i_sb, BARRIER))
		blkdev_issue_flush(inode->i_sb->s_bdev, GFP_KERNEL, NULL,
                           BLKDEV_IFL_WAIT);
out:
	return ret;
}
예제 #9
0
파일: recovery.c 프로젝트: bagana/e2fsprogs
/**
 * journal_recover - recovers a on-disk journal
 * @journal: the journal to recover
 *
 * The primary function for recovering the log contents when mounting a
 * journaled device.
 *
 * Recovery is done in three passes.  In the first pass, we look for the
 * end of the log.  In the second, we assemble the list of revoke
 * blocks.  In the third and final pass, we replay any un-revoked blocks
 * in the log.
 */
int journal_recover(journal_t *journal)
{
	int			err, err2;
	journal_superblock_t *	sb;

	struct recovery_info	info;

	memset(&info, 0, sizeof(info));
	sb = journal->j_superblock;

	/*
	 * The journal superblock's s_start field (the current log head)
	 * is always zero if, and only if, the journal was cleanly
	 * unmounted.
	 */

	if (!sb->s_start) {
		jbd_debug(1, "No recovery required, last transaction %d\n",
			  ext2fs_be32_to_cpu(sb->s_sequence));
		journal->j_transaction_sequence = ext2fs_be32_to_cpu(sb->s_sequence) + 1;
		return 0;
	}

	err = do_one_pass(journal, &info, PASS_SCAN);
	if (!err)
		err = do_one_pass(journal, &info, PASS_REVOKE);
	if (!err)
		err = do_one_pass(journal, &info, PASS_REPLAY);

	jbd_debug(1, "JBD2: recovery, exit status %d, "
		  "recovered transactions %u to %u\n",
		  err, info.start_transaction, info.end_transaction);
	jbd_debug(1, "JBD2: Replayed %d and revoked %d/%d blocks\n",
		  info.nr_replays, info.nr_revoke_hits, info.nr_revokes);

	/* Restart the log at the next transaction ID, thus invalidating
	 * any existing commit records in the log. */
	journal->j_transaction_sequence = ++info.end_transaction;

	journal_clear_revoke(journal);
	err2 = sync_blockdev(journal->j_fs_dev);
	if (!err)
		err = err2;
	/* Make sure all replayed data is on permanent storage */
	if (journal->j_flags & JFS_BARRIER) {
		err2 = blkdev_issue_flush(journal->j_fs_dev, GFP_KERNEL, NULL);
		if (!err)
			err = err2;
	}
	return err;
}
예제 #10
0
int jbd2_journal_recover(journal_t *journal)
{
	int			err, err2;
	journal_superblock_t *	sb;

	struct recovery_info	info;

	memset(&info, 0, sizeof(info));
	sb = journal->j_superblock;


	if (!sb->s_start) {
		jbd_debug(1, "No recovery required, last transaction %d\n",
			  be32_to_cpu(sb->s_sequence));
		journal->j_transaction_sequence = be32_to_cpu(sb->s_sequence) + 1;
		return 0;
	}

	err = do_one_pass(journal, &info, PASS_SCAN);
	if (!err)
		err = do_one_pass(journal, &info, PASS_REVOKE);
	if (!err)
		err = do_one_pass(journal, &info, PASS_REPLAY);

	jbd_debug(1, "JBD2: recovery, exit status %d, "
		  "recovered transactions %u to %u\n",
		  err, info.start_transaction, info.end_transaction);
	jbd_debug(1, "JBD2: Replayed %d and revoked %d/%d blocks\n",
		  info.nr_replays, info.nr_revoke_hits, info.nr_revokes);

	journal->j_transaction_sequence = ++info.end_transaction;

	jbd2_journal_clear_revoke(journal);
	err2 = sync_blockdev(journal->j_fs_dev);
	if (!err)
		err = err2;
	
	if (journal->j_flags & JBD2_BARRIER)
		blkdev_issue_flush(journal->j_fs_dev, GFP_KERNEL, NULL);
	return err;
}
예제 #11
0
int nilfs_sync_file(struct file *file, loff_t start, loff_t end, int datasync)
{
	/*
	 * Called from fsync() system call
	 * This is the only entry point that can catch write and synch
	 * timing for both data blocks and intermediate blocks.
	 *
	 * This function should be implemented when the writeback function
	 * will be implemented.
	 */
	struct the_nilfs *nilfs;
	struct inode *inode = file->f_mapping->host;
	int err;

	err = filemap_write_and_wait_range(inode->i_mapping, start, end);
	if (err)
		return err;
	mutex_lock(&inode->i_mutex);

	if (nilfs_inode_dirty(inode)) {
		if (datasync)
			err = nilfs_construct_dsync_segment(inode->i_sb, inode,
							    0, LLONG_MAX);
		else
			err = nilfs_construct_segment(inode->i_sb);
	}
	mutex_unlock(&inode->i_mutex);

	nilfs = inode->i_sb->s_fs_info;
	if (!err && nilfs_test_opt(nilfs, BARRIER)) {
		err = blkdev_issue_flush(inode->i_sb->s_bdev, GFP_KERNEL, NULL);
		if (err != -EIO)
			err = 0;
	}
	return err;
}
예제 #12
0
파일: fsync.c 프로젝트: mdamt/linux
int ext4_sync_file(struct file *file, loff_t start, loff_t end, int datasync)
{
	struct inode *inode = file->f_mapping->host;
	struct ext4_inode_info *ei = EXT4_I(inode);
	journal_t *journal = EXT4_SB(inode->i_sb)->s_journal;
	int ret = 0, err;
	tid_t commit_tid;
	bool needs_barrier = false;

	if (unlikely(ext4_forced_shutdown(EXT4_SB(inode->i_sb))))
		return -EIO;

	J_ASSERT(ext4_journal_current_handle() == NULL);

	trace_ext4_sync_file_enter(file, datasync);

	if (inode->i_sb->s_flags & MS_RDONLY) {
		/* Make sure that we read updated s_mount_flags value */
		smp_rmb();
		if (EXT4_SB(inode->i_sb)->s_mount_flags & EXT4_MF_FS_ABORTED)
			ret = -EROFS;
		goto out;
	}

	if (!journal) {
		ret = __generic_file_fsync(file, start, end, datasync);
		if (!ret)
			ret = ext4_sync_parent(inode);
		if (test_opt(inode->i_sb, BARRIER))
			goto issue_flush;
		goto out;
	}

	ret = file_write_and_wait_range(file, start, end);
	if (ret)
		return ret;
	/*
	 * data=writeback,ordered:
	 *  The caller's filemap_fdatawrite()/wait will sync the data.
	 *  Metadata is in the journal, we wait for proper transaction to
	 *  commit here.
	 *
	 * data=journal:
	 *  filemap_fdatawrite won't do anything (the buffers are clean).
	 *  ext4_force_commit will write the file data into the journal and
	 *  will wait on that.
	 *  filemap_fdatawait() will encounter a ton of newly-dirtied pages
	 *  (they were dirtied by commit).  But that's OK - the blocks are
	 *  safe in-journal, which is all fsync() needs to ensure.
	 */
	if (ext4_should_journal_data(inode)) {
		ret = ext4_force_commit(inode->i_sb);
		goto out;
	}

	commit_tid = datasync ? ei->i_datasync_tid : ei->i_sync_tid;
	if (journal->j_flags & JBD2_BARRIER &&
	    !jbd2_trans_will_send_data_barrier(journal, commit_tid))
		needs_barrier = true;
	ret = jbd2_complete_transaction(journal, commit_tid);
	if (needs_barrier) {
	issue_flush:
		err = blkdev_issue_flush(inode->i_sb->s_bdev, GFP_KERNEL, NULL);
		if (!ret)
			ret = err;
	}
out:
	trace_ext4_sync_file_exit(inode, ret);
	return ret;
}
예제 #13
0
파일: super.c 프로젝트: JamesAng/lx-sk
int hfsplus_sync_fs(struct super_block *sb, int wait)
{
	struct hfsplus_sb_info *sbi = HFSPLUS_SB(sb);
	struct hfsplus_vh *vhdr = sbi->s_vhdr;
	int write_backup = 0;
	int error, error2;

	if (!wait)
		return 0;

	dprint(DBG_SUPER, "hfsplus_write_super\n");

	sb->s_dirt = 0;

	/*
	 * Explicitly write out the special metadata inodes.
	 *
	 * While these special inodes are marked as hashed and written
	 * out peridocically by the flusher threads we redirty them
	 * during writeout of normal inodes, and thus the life lock
	 * prevents us from getting the latest state to disk.
	 */
	error = filemap_write_and_wait(sbi->cat_tree->inode->i_mapping);
	error2 = filemap_write_and_wait(sbi->ext_tree->inode->i_mapping);
	if (!error)
		error = error2;
	error2 = filemap_write_and_wait(sbi->alloc_file->i_mapping);
	if (!error)
		error = error2;

	mutex_lock(&sbi->vh_mutex);
	mutex_lock(&sbi->alloc_mutex);
	vhdr->free_blocks = cpu_to_be32(sbi->free_blocks);
	vhdr->next_cnid = cpu_to_be32(sbi->next_cnid);
	vhdr->folder_count = cpu_to_be32(sbi->folder_count);
	vhdr->file_count = cpu_to_be32(sbi->file_count);

	if (test_and_clear_bit(HFSPLUS_SB_WRITEBACKUP, &sbi->flags)) {
		memcpy(sbi->s_backup_vhdr, sbi->s_vhdr, sizeof(*sbi->s_vhdr));
		write_backup = 1;
	}

	error2 = hfsplus_submit_bio(sb->s_bdev,
				   sbi->part_start + HFSPLUS_VOLHEAD_SECTOR,
				   sbi->s_vhdr, WRITE_SYNC);
	if (!error)
		error = error2;
	if (!write_backup)
		goto out;

	error2 = hfsplus_submit_bio(sb->s_bdev,
				  sbi->part_start + sbi->sect_count - 2,
				  sbi->s_backup_vhdr, WRITE_SYNC);
	if (!error)
		error2 = error;
out:
	mutex_unlock(&sbi->alloc_mutex);
	mutex_unlock(&sbi->vh_mutex);

	if (!test_bit(HFSPLUS_SB_NOBARRIER, &sbi->flags))
		blkdev_issue_flush(sb->s_bdev, GFP_KERNEL, NULL);

	return error;
}
예제 #14
0
int ext4_sync_file(struct file *file, loff_t start, loff_t end, int datasync)
{
	struct inode *inode = file->f_mapping->host;
	struct ext4_inode_info *ei = EXT4_I(inode);
	journal_t *journal = EXT4_SB(inode->i_sb)->s_journal;
	int ret, err;
	tid_t commit_tid;
	bool needs_barrier = false;

	J_ASSERT(ext4_journal_current_handle() == NULL);

	trace_ext4_sync_file_enter(file, datasync);

	ret = filemap_write_and_wait_range(inode->i_mapping, start, end);
	if (ret)
		return ret;
	if (!mutex_trylock(&inode->i_mutex)) {
		ret = blkdev_issue_flush(inode->i_sb->s_bdev, GFP_KERNEL, NULL);
		trace_ext4_sync_file_exit(inode, ret);
		return ret;
	}

	if (inode->i_sb->s_flags & MS_RDONLY)
		goto out;

	ret = ext4_flush_unwritten_io(inode);
	if (ret < 0)
		goto out;

	if (!journal) {
		ret = __sync_inode(inode, datasync);
		if (!ret && !hlist_empty(&inode->i_dentry))
			ret = ext4_sync_parent(inode);
		goto out;
	}

	/*
	 * data=writeback,ordered:
	 *  The caller's filemap_fdatawrite()/wait will sync the data.
	 *  Metadata is in the journal, we wait for proper transaction to
	 *  commit here.
	 *
	 * data=journal:
	 *  filemap_fdatawrite won't do anything (the buffers are clean).
	 *  ext4_force_commit will write the file data into the journal and
	 *  will wait on that.
	 *  filemap_fdatawait() will encounter a ton of newly-dirtied pages
	 *  (they were dirtied by commit).  But that's OK - the blocks are
	 *  safe in-journal, which is all fsync() needs to ensure.
	 */
	if (ext4_should_journal_data(inode)) {
		ret = ext4_force_commit(inode->i_sb);
		goto out;
	}

	commit_tid = datasync ? ei->i_datasync_tid : ei->i_sync_tid;
	if (journal->j_flags & JBD2_BARRIER &&
	    !jbd2_trans_will_send_data_barrier(journal, commit_tid))
		needs_barrier = true;
	ret = jbd2_complete_transaction(journal, commit_tid);
	if (needs_barrier) {
		err = blkdev_issue_flush(inode->i_sb->s_bdev, GFP_KERNEL, NULL);
		if (!ret)
			ret = err;
	}
 out:
	mutex_unlock(&inode->i_mutex);
	trace_ext4_sync_file_exit(inode, ret);
	return ret;
}