int do_tftpb(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
{
int ret;
bootstage_mark_name(BOOTSTAGE_KERNELREAD_START, "tftp_start");
ret = netboot_common(TFTPGET, cmdtp, argc, argv);
bootstage_mark_name(BOOTSTAGE_KERNELREAD_STOP, "tftp_done");
return ret;
}
static int initr_bootstage(void)
{
/* We cannot do this before initr_dm() */
bootstage_mark_name(BOOTSTAGE_ID_START_UBOOT_R, "board_init_r");
return 0;
}
/*
* Handle a BOOTP received packet.
*/
static void bootp_handler(uchar *pkt, unsigned dest, struct in_addr sip,
unsigned src, unsigned len)
{
struct bootp_hdr *bp;
debug("got BOOTP packet (src=%d, dst=%d, len=%d want_len=%zu)\n",
src, dest, len, sizeof(struct bootp_hdr));
bp = (struct bootp_hdr *)pkt;
/* Filter out pkts we don't want */
if (check_packet(pkt, dest, src, len))
return;
/*
* Got a good BOOTP reply. Copy the data into our variables.
*/
#ifdef CONFIG_STATUS_LED
status_led_set(STATUS_LED_BOOT, STATUS_LED_OFF);
#endif
store_net_params(bp); /* Store net parameters from reply */
/* Retrieve extended information (we must parse the vendor area) */
if (net_read_u32((u32 *)&bp->bp_vend[0]) == htonl(BOOTP_VENDOR_MAGIC))
bootp_process_vendor((uchar *)&bp->bp_vend[4], len);
net_set_timeout_handler(0, (thand_f *)0);
bootstage_mark_name(BOOTSTAGE_ID_BOOTP_STOP, "bootp_stop");
debug("Got good BOOTP\n");
net_auto_load();
}
/*
* Handle a BOOTP received packet.
*/
static void
BootpHandler(uchar *pkt, unsigned dest, IPaddr_t sip, unsigned src,
unsigned len)
{
struct Bootp_t *bp;
debug("got BOOTP packet (src=%d, dst=%d, len=%d want_len=%zu)\n",
src, dest, len, sizeof(struct Bootp_t));
bp = (struct Bootp_t *)pkt;
/* Filter out pkts we don't want */
if (BootpCheckPkt(pkt, dest, src, len))
return;
/*
* Got a good BOOTP reply. Copy the data into our variables.
*/
#ifdef CONFIG_STATUS_LED
status_led_set(STATUS_LED_BOOT, STATUS_LED_OFF);
#endif
BootpCopyNetParams(bp); /* Store net parameters from reply */
/* Retrieve extended information (we must parse the vendor area) */
if (NetReadLong((uint *)&bp->bp_vend[0]) == htonl(BOOTP_VENDOR_MAGIC))
BootpVendorProcess((uchar *)&bp->bp_vend[4], len);
NetSetTimeout(0, (thand_f *)0);
bootstage_mark_name(BOOTSTAGE_ID_BOOTP_STOP, "bootp_stop");
debug("Got good BOOTP\n");
net_auto_load();
}
ulong bootstage_mark_code(const char *file, const char *func, int linenum)
{
char *str, *p;
__maybe_unused char *end;
int len = 0;
/* First work out the length we need to allocate */
if (linenum != -1)
len = 11;
if (func)
len += strlen(func);
if (file)
len += strlen(file);
str = malloc(len + 1);
p = str;
end = p + len;
if (file)
p += snprintf(p, end - p, "%s,", file);
if (linenum != -1)
p += snprintf(p, end - p, "%d", linenum);
if (func)
p += snprintf(p, end - p, ": %s", func);
return bootstage_mark_name(BOOTSTAGE_ID_ALLOC, str);
}
static int
do_vboot_twostop(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
{
uint32_t selection;
int ro_firmware;
bootstage_mark_name(BOOTSTAGE_VBOOT_TWOSTOP, "do_vboot_twostop");
/*
* Empty keyboard buffer before boot. In case EC did not clear its
* buffer between power cycles, this prevents vboot of current power
* cycle being affected by keystrokes of previous power cycle.
*/
while (tstc())
getc();
if (cros_init()) {
VBDEBUG("fail to init cros library\n");
goto on_error;
}
/*
* TODO: We should clear screen later if we load graphics optionally.
* In normal mode, we don't need to load graphics driver and clear
* screen.
*/
display_clear();
/*
* A processor reset jumps to the reset entry point (which is the
* read-only firmware), otherwise we have entered U-Boot from a
* software jump.
*
* Note: If a read-only firmware is loaded to memory not because of a
* processor reset, this instance of read-only firmware should go to the
* readwrite firmware code path.
*/
ro_firmware = is_processor_reset();
VBDEBUG("Starting %s firmware\n", ro_firmware ? "read-only" :
"read-write");
if (ro_firmware)
selection = twostop_boot(0);
else
selection = twostop_readwrite_main_firmware();
VBDEBUG("selection of main firmware: %s\n",
str_selection(selection));
if (selection == TWOSTOP_SELECT_COMMAND_LINE)
return 0;
if (selection == TWOSTOP_SELECT_POWER_OFF)
power_off();
assert(selection == TWOSTOP_SELECT_ERROR);
on_error:
cold_reboot();
return 0;
}
static int initr_reloc(void)
{
/* tell others: relocation done */
gd->flags |= GD_FLG_RELOC | GD_FLG_FULL_MALLOC_INIT;
bootstage_mark_name(BOOTSTAGE_ID_START_UBOOT_R, "board_init_r");
return 0;
}
static int bootm_start(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
{
memset((void *)&images, 0, sizeof(images));
images.verify = getenv_yesno("verify");
boot_start_lmb(&images);
bootstage_mark_name(BOOTSTAGE_ID_BOOTM_START, "bootm_start");
images.state = BOOTM_STATE_START;
return 0;
}
static int spl_common_init(bool setup_malloc)
{
int ret;
debug("spl_early_init()\n");
#if CONFIG_VAL(SYS_MALLOC_F_LEN)
if (setup_malloc) {
#ifdef CONFIG_MALLOC_F_ADDR
gd->malloc_base = CONFIG_MALLOC_F_ADDR;
#endif
gd->malloc_limit = CONFIG_VAL(SYS_MALLOC_F_LEN);
gd->malloc_ptr = 0;
}
#endif
ret = bootstage_init(true);
if (ret) {
debug("%s: Failed to set up bootstage: ret=%d\n", __func__,
ret);
return ret;
}
bootstage_mark_name(BOOTSTAGE_ID_START_SPL, "spl");
if (CONFIG_IS_ENABLED(OF_CONTROL) && !CONFIG_IS_ENABLED(OF_PLATDATA)) {
ret = fdtdec_setup();
if (ret) {
debug("fdtdec_setup() returned error %d\n", ret);
return ret;
}
}
if (CONFIG_IS_ENABLED(DM)) {
bootstage_start(BOOTSTATE_ID_ACCUM_DM_SPL, "dm_spl");
/* With CONFIG_SPL_OF_PLATDATA, bring in all devices */
ret = dm_init_and_scan(!CONFIG_IS_ENABLED(OF_PLATDATA));
bootstage_accum(BOOTSTATE_ID_ACCUM_DM_SPL);
if (ret) {
debug("dm_init_and_scan() returned error %d\n", ret);
return ret;
}
}
return 0;
}
void
BootpRequest(void)
{
uchar *pkt, *iphdr;
struct Bootp_t *bp;
int extlen, pktlen, iplen;
int eth_hdr_size;
#ifdef CONFIG_BOOTP_RANDOM_DELAY
ulong i, rand_ms;
#endif
bootstage_mark_name(BOOTSTAGE_ID_BOOTP_START, "bootp_start");
#if defined(CONFIG_CMD_DHCP)
dhcp_state = INIT;
#endif
#ifdef CONFIG_BOOTP_RANDOM_DELAY /* Random BOOTP delay */
if (BootpTry == 0)
srand_mac();
if (BootpTry <= 2) /* Start with max 1024 * 1ms */
rand_ms = rand() >> (22 - BootpTry);
else /* After 3rd BOOTP request max 8192 * 1ms */
/* Record the board_init_f() bootstage (after arch_cpu_init()) */
static int initf_bootstage(void)
{
bool from_spl = IS_ENABLED(CONFIG_SPL_BOOTSTAGE) &&
IS_ENABLED(CONFIG_BOOTSTAGE_STASH);
int ret;
ret = bootstage_init(!from_spl);
if (ret)
return ret;
if (from_spl) {
const void *stash = map_sysmem(CONFIG_BOOTSTAGE_STASH_ADDR,
CONFIG_BOOTSTAGE_STASH_SIZE);
ret = bootstage_unstash(stash, CONFIG_BOOTSTAGE_STASH_SIZE);
if (ret && ret != -ENOENT) {
debug("Failed to unstash bootstage: err=%d\n", ret);
return ret;
}
}
bootstage_mark_name(BOOTSTAGE_ID_START_UBOOT_F, "board_init_f");
return 0;
}
static uint32_t
twostop_select_and_set_main_firmware(struct twostop_fmap *fmap,
firmware_storage_t *file, void *gbb,
size_t gbb_size, crossystem_data_t *cdata,
void *vb_shared_data, int *boot_mode,
void **fw_blob_ptr, uint32_t *fw_size_ptr)
{
uint32_t selection;
uint32_t id_offset = 0, id_length = 0;
int firmware_type;
#ifndef CONFIG_HARDWARE_MAPPED_SPI
uint8_t firmware_id[ID_LEN];
#else
uint8_t *firmware_id;
#endif
VbCommonParams cparams;
bootstage_mark_name(BOOTSTAGE_VBOOT_SELECT_AND_SET,
"twostop_select_and_set_main_firmware");
if (twostop_init_cparams(fmap, gbb, vb_shared_data, &cparams)) {
VBDEBUG("failed to init cparams\n");
return TWOSTOP_SELECT_ERROR;
}
if (twostop_init_vboot_library(file, gbb, fmap->readonly.gbb.offset,
gbb_size, cdata, &cparams)
!= VBERROR_SUCCESS) {
VBDEBUG("failed to init vboot library\n");
return TWOSTOP_SELECT_ERROR;
}
selection = twostop_make_selection(fmap, file, &cparams,
fw_blob_ptr, fw_size_ptr);
VBDEBUG("selection: %s\n", str_selection(selection));
if (selection == TWOSTOP_SELECT_ERROR)
return TWOSTOP_SELECT_ERROR;
switch(selection) {
case VB_SELECT_FIRMWARE_RECOVERY:
case VB_SELECT_FIRMWARE_READONLY:
id_offset = fmap->readonly.firmware_id.offset;
id_length = fmap->readonly.firmware_id.length;
break;
case VB_SELECT_FIRMWARE_A:
id_offset = fmap->readwrite_a.firmware_id.offset;
id_length = fmap->readwrite_a.firmware_id.length;
break;
case VB_SELECT_FIRMWARE_B:
id_offset = fmap->readwrite_b.firmware_id.offset;
id_length = fmap->readwrite_b.firmware_id.length;
break;
default:
VBDEBUG("impossible selection value: %d\n", selection);
assert(0);
}
if (file->read(file, id_offset,
MIN(sizeof(firmware_id), id_length),
BT_EXTRA firmware_id)) {
VBDEBUG("failed to read active firmware id\n");
firmware_id[0] = '\0';
}
if (selection == VB_SELECT_FIRMWARE_RECOVERY)
firmware_type = FIRMWARE_TYPE_RECOVERY;
else if (cdata->boot_developer_switch)
firmware_type = FIRMWARE_TYPE_DEVELOPER;
else
firmware_type = FIRMWARE_TYPE_NORMAL;
*boot_mode = firmware_type;
VBDEBUG("active main firmware type : %d\n", firmware_type);
VBDEBUG("active main firmware id : \"%s\"\n", firmware_id);
if (crossystem_data_set_main_firmware(cdata,
firmware_type, firmware_id)) {
VBDEBUG("failed to set active main firmware\n");
return TWOSTOP_SELECT_ERROR;
}
return selection;
}
static int bootm_start(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
{
const void *os_hdr;
int ret;
memset((void *)&images, 0, sizeof(images));
images.verify = getenv_yesno("verify");
boot_start_lmb(&images);
bootstage_mark_name(BOOTSTAGE_ID_BOOTM_START, "bootm_start");
/* get kernel image header, start address and length */
os_hdr = boot_get_kernel(cmdtp, flag, argc, argv,
&images, &images.os.image_start, &images.os.image_len);
if (images.os.image_len == 0) {
puts("ERROR: can't get kernel image!\n");
return 1;
}
/* get image parameters */
switch (genimg_get_format(os_hdr)) {
case IMAGE_FORMAT_LEGACY:
images.os.type = image_get_type(os_hdr);
images.os.comp = image_get_comp(os_hdr);
images.os.os = image_get_os(os_hdr);
images.os.end = image_get_image_end(os_hdr);
images.os.load = image_get_load(os_hdr);
break;
#if defined(CONFIG_FIT)
case IMAGE_FORMAT_FIT:
if (fit_image_get_type(images.fit_hdr_os,
images.fit_noffset_os, &images.os.type)) {
puts("Can't get image type!\n");
bootstage_error(BOOTSTAGE_ID_FIT_TYPE);
return 1;
}
if (fit_image_get_comp(images.fit_hdr_os,
images.fit_noffset_os, &images.os.comp)) {
puts("Can't get image compression!\n");
bootstage_error(BOOTSTAGE_ID_FIT_COMPRESSION);
return 1;
}
if (fit_image_get_os(images.fit_hdr_os,
images.fit_noffset_os, &images.os.os)) {
puts("Can't get image OS!\n");
bootstage_error(BOOTSTAGE_ID_FIT_OS);
return 1;
}
images.os.end = fit_get_end(images.fit_hdr_os);
if (fit_image_get_load(images.fit_hdr_os, images.fit_noffset_os,
&images.os.load)) {
puts("Can't get image load address!\n");
bootstage_error(BOOTSTAGE_ID_FIT_LOADADDR);
return 1;
}
break;
#endif
default:
puts("ERROR: unknown image format type!\n");
return 1;
}
/* find kernel entry point */
if (images.legacy_hdr_valid) {
images.ep = image_get_ep(&images.legacy_hdr_os_copy);
#if defined(CONFIG_FIT)
} else if (images.fit_uname_os) {
ret = fit_image_get_entry(images.fit_hdr_os,
images.fit_noffset_os, &images.ep);
if (ret) {
puts("Can't get entry point property!\n");
return 1;
}
#endif
} else {
puts("Could not find kernel entry point!\n");
return 1;
}
if (images.os.type == IH_TYPE_KERNEL_NOLOAD) {
images.os.load = images.os.image_start;
images.ep += images.os.load;
}
if (((images.os.type == IH_TYPE_KERNEL) ||
(images.os.type == IH_TYPE_KERNEL_NOLOAD) ||
(images.os.type == IH_TYPE_MULTI)) &&
(images.os.os == IH_OS_LINUX)) {
/* find ramdisk */
ret = boot_get_ramdisk(argc, argv, &images, IH_INITRD_ARCH,
&images.rd_start, &images.rd_end);
if (ret) {
puts("Ramdisk image is corrupt or invalid\n");
return 1;
}
#if defined(CONFIG_OF_LIBFDT)
/* find flattened device tree */
ret = boot_get_fdt(flag, argc, argv, &images,
&images.ft_addr, &images.ft_len);
if (ret) {
puts("Could not find a valid device tree\n");
return 1;
}
set_working_fdt_addr(images.ft_addr);
#endif
}
images.os.start = (ulong)os_hdr;
images.state = BOOTM_STATE_START;
return 0;
}
static int
twostop_init(struct twostop_fmap *fmap, firmware_storage_t *file,
void **gbbp, size_t gbb_size, crossystem_data_t *cdata,
void *vb_shared_data)
{
struct vboot_flag_details wpsw, recsw, devsw, oprom;
GoogleBinaryBlockHeader *gbbh;
uint8_t hardware_id[ID_LEN];
#ifndef CONFIG_HARDWARE_MAPPED_SPI
uint8_t readonly_firmware_id[ID_LEN];
#else
uint8_t *readonly_firmware_id;
#endif
int oprom_matters = 0;
int ret = -1;
void *gbb;
bootstage_mark_name(BOOTSTAGE_VBOOT_TWOSTOP_INIT, "twostop_init");
if (vboot_flag_fetch(VBOOT_FLAG_WRITE_PROTECT, &wpsw) ||
vboot_flag_fetch(VBOOT_FLAG_RECOVERY, &recsw) ||
vboot_flag_fetch(VBOOT_FLAG_DEVELOPER, &devsw) ||
vboot_flag_fetch(VBOOT_FLAG_OPROM_LOADED, &oprom)) {
VBDEBUG("failed to fetch gpio\n");
return -1;
}
vboot_flag_dump(VBOOT_FLAG_WRITE_PROTECT, &wpsw);
vboot_flag_dump(VBOOT_FLAG_RECOVERY, &recsw);
vboot_flag_dump(VBOOT_FLAG_DEVELOPER, &devsw);
vboot_flag_dump(VBOOT_FLAG_OPROM_LOADED, &oprom);
if (cros_fdtdec_config_has_prop(gd->fdt_blob, "oprom-matters")) {
VBDEBUG("FDT says oprom-matters\n");
oprom_matters = 1;
}
if (!fmap->readonly.fmap.length &&
cros_fdtdec_flashmap(gd->fdt_blob, fmap)) {
VBDEBUG("failed to decode fmap\n");
return -1;
}
dump_fmap(fmap);
/* We revert the decision of using firmware_storage_open_twostop() */
if (firmware_storage_open_spi(file)) {
VBDEBUG("failed to open firmware storage\n");
return -1;
}
/* Read read-only firmware ID */
if (file->read(file, fmap->readonly.firmware_id.offset,
MIN(sizeof(readonly_firmware_id),
fmap->readonly.firmware_id.length),
BT_EXTRA readonly_firmware_id)) {
VBDEBUG("failed to read firmware ID\n");
readonly_firmware_id[0] = '\0';
}
VBDEBUG("read-only firmware id: \"%s\"\n", readonly_firmware_id);
/* Load basic parts of gbb blob */
#ifdef CONFIG_HARDWARE_MAPPED_SPI
if (gbb_init(gbbp, file, fmap->readonly.gbb.offset, gbb_size)) {
VBDEBUG("failed to read gbb\n");
goto out;
}
gbb = *gbbp;
#else
gbb = *gbbp;
if (gbb_init(gbb, file, fmap->readonly.gbb.offset, gbb_size)) {
VBDEBUG("failed to read gbb\n");
goto out;
}
#endif
gbbh = (GoogleBinaryBlockHeader *)gbb;
memcpy(hardware_id, gbb + gbbh->hwid_offset,
MIN(sizeof(hardware_id), gbbh->hwid_size));
VBDEBUG("hardware id: \"%s\"\n", hardware_id);
/* Initialize crossystem data */
/*
* TODO There is no readwrite EC firmware on our current ARM boards. But
* we should have a mechanism to probe (or acquire this information from
* the device tree) whether the active EC firmware is R/O or R/W.
*/
if (crossystem_data_init(cdata,
&wpsw, &recsw, &devsw, &oprom,
oprom_matters,
fmap->readonly.fmap.offset,
ACTIVE_EC_FIRMWARE_RO,
hardware_id,
readonly_firmware_id)) {
VBDEBUG("failed to init crossystem data\n");
goto out;
}
ret = 0;
#ifdef CONFIG_VIDEO_TEGRA
tegra_lcd_check_next_stage(gd->fdt_blob, 0);
#endif
#ifdef CONFIG_EXYNOS_DISPLAYPORT
exynos_lcd_check_next_stage(gd->fdt_blob, 0);
#endif
out:
if (ret)
file->close(file);
return ret;
}
int net_loop(enum proto_t protocol)
{
int ret = -EINVAL;
net_restarted = 0;
net_dev_exists = 0;
net_try_count = 1;
debug_cond(DEBUG_INT_STATE, "--- net_loop Entry\n");
bootstage_mark_name(BOOTSTAGE_ID_ETH_START, "eth_start");
net_init();
if (eth_is_on_demand_init() || protocol != NETCONS) {
eth_halt();
eth_set_current();
ret = eth_init();
if (ret < 0) {
eth_halt();
return ret;
}
} else {
eth_init_state_only();
}
restart:
#ifdef CONFIG_USB_KEYBOARD
net_busy_flag = 0;
#endif
net_set_state(NETLOOP_CONTINUE);
/*
* Start the ball rolling with the given start function. From
* here on, this code is a state machine driven by received
* packets and timer events.
*/
debug_cond(DEBUG_INT_STATE, "--- net_loop Init\n");
net_init_loop();
switch (net_check_prereq(protocol)) {
case 1:
/* network not configured */
eth_halt();
return -ENODEV;
case 2:
/* network device not configured */
break;
case 0:
net_dev_exists = 1;
net_boot_file_size = 0;
switch (protocol) {
case TFTPGET:
#ifdef CONFIG_CMD_TFTPPUT
case TFTPPUT:
#endif
/* always use ARP to get server ethernet address */
tftp_start(protocol);
break;
#ifdef CONFIG_CMD_TFTPSRV
case TFTPSRV:
tftp_start_server();
break;
#endif
#if defined(CONFIG_CMD_DHCP)
case DHCP:
bootp_reset();
net_ip.s_addr = 0;
dhcp_request(); /* Basically same as BOOTP */
break;
#endif
case BOOTP:
bootp_reset();
net_ip.s_addr = 0;
bootp_request();
break;
#if defined(CONFIG_CMD_RARP)
case RARP:
rarp_try = 0;
net_ip.s_addr = 0;
rarp_request();
break;
#endif
#if defined(CONFIG_CMD_PING)
case PING:
ping_start();
break;
#endif
#if defined(CONFIG_CMD_NFS)
case NFS:
nfs_start();
break;
#endif
#if defined(CONFIG_CMD_CDP)
case CDP:
cdp_start();
break;
#endif
#if defined(CONFIG_NETCONSOLE) && !(CONFIG_SPL_BUILD)
case NETCONS:
nc_start();
break;
#endif
#if defined(CONFIG_CMD_SNTP)
case SNTP:
sntp_start();
break;
#endif
#if defined(CONFIG_CMD_DNS)
case DNS:
dns_start();
break;
#endif
#if defined(CONFIG_CMD_LINK_LOCAL)
case LINKLOCAL:
link_local_start();
break;
#endif
default:
break;
}
break;
}
#if defined(CONFIG_MII) || defined(CONFIG_CMD_MII)
#if defined(CONFIG_SYS_FAULT_ECHO_LINK_DOWN) && \
defined(CONFIG_STATUS_LED) && \
defined(STATUS_LED_RED)
/*
* Echo the inverted link state to the fault LED.
*/
if (miiphy_link(eth_get_dev()->name, CONFIG_SYS_FAULT_MII_ADDR))
status_led_set(STATUS_LED_RED, STATUS_LED_OFF);
else
status_led_set(STATUS_LED_RED, STATUS_LED_ON);
#endif /* CONFIG_SYS_FAULT_ECHO_LINK_DOWN, ... */
#endif /* CONFIG_MII, ... */
#ifdef CONFIG_USB_KEYBOARD
net_busy_flag = 1;
#endif
/*
* Main packet reception loop. Loop receiving packets until
* someone sets `net_state' to a state that terminates.
*/
for (;;) {
WATCHDOG_RESET();
#ifdef CONFIG_SHOW_ACTIVITY
show_activity(1);
#endif
if (arp_timeout_check() > 0)
time_start = get_timer(0);
/*
* Check the ethernet for a new packet. The ethernet
* receive routine will process it.
* Most drivers return the most recent packet size, but not
* errors that may have happened.
*/
eth_rx();
/*
* Abort if ctrl-c was pressed.
*/
if (ctrlc()) {
/* cancel any ARP that may not have completed */
net_arp_wait_packet_ip.s_addr = 0;
net_cleanup_loop();
eth_halt();
/* Invalidate the last protocol */
eth_set_last_protocol(BOOTP);
puts("\nAbort\n");
/* include a debug print as well incase the debug
messages are directed to stderr */
debug_cond(DEBUG_INT_STATE, "--- net_loop Abort!\n");
ret = -EINTR;
goto done;
}
/*
* Check for a timeout, and run the timeout handler
* if we have one.
*/
if (time_handler &&
((get_timer(0) - time_start) > time_delta)) {
thand_f *x;
#if defined(CONFIG_MII) || defined(CONFIG_CMD_MII)
#if defined(CONFIG_SYS_FAULT_ECHO_LINK_DOWN) && \
defined(CONFIG_STATUS_LED) && \
defined(STATUS_LED_RED)
/*
* Echo the inverted link state to the fault LED.
*/
if (miiphy_link(eth_get_dev()->name,
CONFIG_SYS_FAULT_MII_ADDR))
status_led_set(STATUS_LED_RED, STATUS_LED_OFF);
else
status_led_set(STATUS_LED_RED, STATUS_LED_ON);
#endif /* CONFIG_SYS_FAULT_ECHO_LINK_DOWN, ... */
#endif /* CONFIG_MII, ... */
debug_cond(DEBUG_INT_STATE, "--- net_loop timeout\n");
x = time_handler;
time_handler = (thand_f *)0;
(*x)();
}
if (net_state == NETLOOP_FAIL)
ret = net_start_again();
switch (net_state) {
case NETLOOP_RESTART:
net_restarted = 1;
goto restart;
case NETLOOP_SUCCESS:
net_cleanup_loop();
if (net_boot_file_size > 0) {
printf("Bytes transferred = %d (%x hex)\n",
net_boot_file_size, net_boot_file_size);
setenv_hex("filesize", net_boot_file_size);
setenv_hex("fileaddr", load_addr);
}
if (protocol != NETCONS)
eth_halt();
else
eth_halt_state_only();
eth_set_last_protocol(protocol);
ret = net_boot_file_size;
debug_cond(DEBUG_INT_STATE, "--- net_loop Success!\n");
goto done;
case NETLOOP_FAIL:
net_cleanup_loop();
/* Invalidate the last protocol */
eth_set_last_protocol(BOOTP);
debug_cond(DEBUG_INT_STATE, "--- net_loop Fail!\n");
goto done;
case NETLOOP_CONTINUE:
continue;
}
}
done:
#ifdef CONFIG_USB_KEYBOARD
net_busy_flag = 0;
#endif
#ifdef CONFIG_CMD_TFTPPUT
/* Clear out the handlers */
net_set_udp_handler(NULL);
net_set_icmp_handler(NULL);
#endif
return ret;
}
static uint32_t
twostop_main_firmware(struct twostop_fmap *fmap, void *gbb,
crossystem_data_t *cdata, void *vb_shared_data)
{
VbError_t err;
VbSelectAndLoadKernelParams kparams;
VbCommonParams cparams;
size_t size = 0;
#ifdef CONFIG_BOOTSTAGE_STASH
bootstage_unstash((void *)CONFIG_BOOTSTAGE_STASH,
CONFIG_BOOTSTAGE_STASH_SIZE);
#endif
bootstage_mark_name(BOOTSTAGE_VBOOT_TWOSTOP_MAIN_FIRMWARE,
"twostop_main_firmware");
if (twostop_init_cparams(fmap, gbb, vb_shared_data, &cparams)) {
VBDEBUG("failed to init cparams\n");
return TWOSTOP_SELECT_ERROR;
}
/*
* Note that in case "kernel" is not found in the device tree, the
* "size" value is going to remain unchanged.
*/
kparams.kernel_buffer = cros_fdtdec_alloc_region(gd->fdt_blob,
"kernel", &size);
kparams.kernel_buffer_size = size;
VBDEBUG("kparams:\n");
VBDEBUG("- kernel_buffer: : %p\n", kparams.kernel_buffer);
VBDEBUG("- kernel_buffer_size: : %08x\n",
kparams.kernel_buffer_size);
#ifdef CONFIG_EXYNOS_DISPLAYPORT
/*
* Make sure the LCD is up before we load the kernel. Partly this
* is because VbSelectAndLoadKernel may do a software sync.
*/
exynos_lcd_check_next_stage(gd->fdt_blob, 1);
#endif
if ((err = VbSelectAndLoadKernel(&cparams, &kparams))) {
VBDEBUG("VbSelectAndLoadKernel: %d\n", err);
switch (err) {
case VBERROR_SHUTDOWN_REQUESTED:
return TWOSTOP_SELECT_POWER_OFF;
case VBERROR_BIOS_SHELL_REQUESTED:
return TWOSTOP_SELECT_COMMAND_LINE;
case VBERROR_EC_REBOOT_TO_RO_REQUIRED:
request_ec_reboot_to_ro();
return TWOSTOP_SELECT_POWER_OFF;
}
return TWOSTOP_SELECT_ERROR;
}
VBDEBUG("kparams:\n");
VBDEBUG("- kernel_buffer: : %p\n", kparams.kernel_buffer);
VBDEBUG("- kernel_buffer_size: : %08x\n",
kparams.kernel_buffer_size);
VBDEBUG("- disk_handle: : %p\n", kparams.disk_handle);
VBDEBUG("- partition_number: : %08x\n",
kparams.partition_number);
VBDEBUG("- bootloader_address: : %08llx\n",
kparams.bootloader_address);
VBDEBUG("- bootloader_size: : %08x\n",
kparams.bootloader_size);
VBDEBUG("- partition_guid: :");
#ifdef VBOOT_DEBUG
int i;
for (i = 0; i < 16; i++)
VbExDebug(" %02x", kparams.partition_guid[i]);
VbExDebug("\n");
#endif /* VBOOT_DEBUG */
/* EC might jump between RO and RW during software sync. We need to
* update active EC copy in cdata. */
set_active_ec_firmware(cdata);
crossystem_data_dump(cdata);
#if defined(CONFIG_SANDBOX)
return TWOSTOP_SELECT_COMMAND_LINE;
#else
boot_kernel(&kparams, cdata);
/* It is an error if boot_kenel returns */
return TWOSTOP_SELECT_ERROR;
#endif
}
void board_init_f(ulong bootflag)
{
bd_t *bd;
init_fnc_t **init_fnc_ptr;
gd_t *id;
ulong addr, addr_sp;
#ifdef CONFIG_PRAM
ulong reg;
#endif
bootstage_mark_name(BOOTSTAGE_ID_START_UBOOT_F, "board_init_f");
/* Pointer is writable since we allocated a register for it */
gd = (gd_t *) ((CONFIG_SYS_INIT_SP_ADDR) & ~0x07);
/* compiler optimization barrier needed for GCC >= 3.4 */
__asm__ __volatile__("": : :"memory");
memset((void *)gd, 0, sizeof(gd_t));
gd->mon_len = _bss_end_ofs;
#ifdef CONFIG_OF_EMBED
/* Get a pointer to the FDT */
gd->fdt_blob = _binary_dt_dtb_start;
#elif defined CONFIG_OF_SEPARATE
/* FDT is at end of image */
gd->fdt_blob = (void *)(_end_ofs + _TEXT_BASE);
#endif
/* Allow the early environment to override the fdt address */
gd->fdt_blob = (void *)getenv_ulong("fdtcontroladdr", 16,
(uintptr_t)gd->fdt_blob);
for (init_fnc_ptr = init_sequence; *init_fnc_ptr; ++init_fnc_ptr) {
if ((*init_fnc_ptr)() != 0) {
hang ();
}
}
#ifdef CONFIG_OF_CONTROL
/* For now, put this check after the console is ready */
if (fdtdec_prepare_fdt()) {
panic("** CONFIG_OF_CONTROL defined but no FDT - please see "
"doc/README.fdt-control");
}
#endif
debug("monitor len: %08lX\n", gd->mon_len);
/*
* Ram is setup, size stored in gd !!
*/
//gd->ram_size = gd->bd->bi_dram[0].size;
debug("ramsize: %08lX\n", gd->ram_size);
#if defined(CONFIG_SYS_MEM_TOP_HIDE)
/*
* Subtract specified amount of memory to hide so that it won't
* get "touched" at all by U-Boot. By fixing up gd->ram_size
* the Linux kernel should now get passed the now "corrected"
* memory size and won't touch it either. This should work
* for arch/ppc and arch/powerpc. Only Linux board ports in
* arch/powerpc with bootwrapper support, that recalculate the
* memory size from the SDRAM controller setup will have to
* get fixed.
*/
gd->ram_size -= CONFIG_SYS_MEM_TOP_HIDE;
#endif
addr = CONFIG_SYS_SDRAM_BASE + gd->ram_size;
#ifdef CONFIG_LOGBUFFER
#ifndef CONFIG_ALT_LB_ADDR
/* reserve kernel log buffer */
addr -= (LOGBUFF_RESERVE);
debug("Reserving %dk for kernel logbuffer at %08lx\n", LOGBUFF_LEN,
addr);
#endif
#endif
#ifdef CONFIG_PRAM
/*
* reserve protected RAM
*/
reg = getenv_ulong("pram", 10, CONFIG_PRAM);
addr -= (reg << 10); /* size is in kB */
debug("Reserving %ldk for protected RAM at %08lx\n", reg, addr);
#endif /* CONFIG_PRAM */
#if !(defined(CONFIG_SYS_ICACHE_OFF) && defined(CONFIG_SYS_DCACHE_OFF))
/* reserve TLB table */
addr -= (4096 * 4);
/* round down to next 64 kB limit */
addr &= ~(0x10000 - 1);
gd->tlb_addr = addr;
debug("TLB table at: %08lx\n", addr);
#endif
/* round down to next 4 kB limit */
addr &= ~(4096 - 1);
debug("Top of RAM usable for U-Boot at: %08lx\n", addr);
#ifdef CONFIG_LCD
#ifdef CONFIG_FB_ADDR
gd->fb_base = CONFIG_FB_ADDR;
#else
/* reserve memory for LCD display (always full pages) */
addr = lcd_setmem(addr);
gd->fb_base = addr;
#endif /* CONFIG_FB_ADDR */
#endif /* CONFIG_LCD */
/*
* reserve memory for U-Boot code, data & bss
* round down to next 4 kB limit
*/
addr -= gd->mon_len;
addr &= ~(4096 - 1);
debug("Reserving %ldk for U-Boot at: %08lx\n", gd->mon_len >> 10, addr);
#ifndef CONFIG_SPL_BUILD
/*
* reserve memory for malloc() arena
*/
addr_sp = addr - TOTAL_MALLOC_LEN;
debug("Reserving %dk for malloc() at: %08lx\n",
TOTAL_MALLOC_LEN >> 10, addr_sp);
/*
* (permanently) allocate a Board Info struct
* and a permanent copy of the "global" data
*/
addr_sp -= sizeof (bd_t);
bd = (bd_t *) addr_sp;
gd->bd = bd;
debug("Reserving %zu Bytes for Board Info at: %08lx\n",
sizeof (bd_t), addr_sp);
#ifdef CONFIG_MACH_TYPE
gd->bd->bi_arch_number = CONFIG_MACH_TYPE; /* board id for Linux */
#endif
addr_sp -= sizeof (gd_t);
id = (gd_t *) addr_sp;
debug("Reserving %zu Bytes for Global Data at: %08lx\n",
sizeof (gd_t), addr_sp);
/* setup stackpointer for exeptions */
gd->irq_sp = addr_sp;
#ifdef CONFIG_USE_IRQ
addr_sp -= (CONFIG_STACKSIZE_IRQ+CONFIG_STACKSIZE_FIQ);
debug("Reserving %zu Bytes for IRQ stack at: %08lx\n",
CONFIG_STACKSIZE_IRQ+CONFIG_STACKSIZE_FIQ, addr_sp);
#endif
/* leave 3 words for abort-stack */
addr_sp -= 12;
/* 8-byte alignment for ABI compliance */
addr_sp &= ~0x07;
#else
addr_sp += 128; /* leave 32 words for abort-stack */
gd->irq_sp = addr_sp;
#endif
debug("New Stack Pointer is: %08lx\n", addr_sp);
#ifdef CONFIG_POST
post_bootmode_init();
post_run(NULL, POST_ROM | post_bootmode_get(0));
#endif
gd->bd->bi_baudrate = gd->baudrate;
/* Ram ist board specific, so move it to board code ... */
dram_init_banksize();
display_dram_config(); /* and display it */
gd->relocaddr = addr;
gd->start_addr_sp = addr_sp;
gd->reloc_off = addr - _TEXT_BASE;
debug("relocation Offset is: %08lx\n", gd->reloc_off);
memcpy(id, (void *)gd, sizeof(gd_t));
relocate_code(addr_sp, id, addr);
/* NOTREACHED - relocate_code() does not return */
}
int board_init(void)
{
struct fdt_memory mem_config;
/* Record the time we spent before SPL */
bootstage_add_record(BOOTSTAGE_ID_START_SPL, "spl_start", 0,
CONFIG_SPL_TIME_US);
bootstage_mark_name(BOOTSTAGE_ID_BOARD_INIT, "board_init");
if (fdtdec_decode_memory(gd->fdt_blob, &mem_config)) {
debug("%s: Failed to decode memory\n", __func__);
return -1;
}
gd->bd->bi_boot_params = mem_config.start + 0x100UL;
#ifdef CONFIG_OF_CONTROL
gd->bd->bi_arch_number = fdtdec_get_config_int(gd->fdt_blob,
"machine-arch-id", -1);
if (gd->bd->bi_arch_number == -1U)
debug("Warning: No /config/machine-arch-id defined in fdt\n");
#endif
#ifdef CONFIG_EXYNOS_SPI
spi_init();
#endif
if (board_i2c_arb_init(gd->fdt_blob))
return -1;
board_i2c_init(gd->fdt_blob);
#ifdef CONFIG_TPS65090_POWER
tps65090_init();
/*
* If we just reset, disable the backlight and lcd fets before
* [re-]initializing the lcd. This ensures we are always in the same
* state during lcd init. We've seen some oddities with these fets, so
* this removes a bit of uncertainty.
*/
if (board_is_processor_reset()) {
tps65090_fet_disable(1);
tps65090_fet_disable(6);
}
#endif
exynos_lcd_check_next_stage(gd->fdt_blob, 0);
if (max77686_enable_32khz_cp()) {
debug("%s: Failed to enable max77686 32khz coprocessor clock\n",
__func__);
return -1;
}
#if defined CONFIG_EXYNOS_CPUFREQ
if (exynos5250_cpufreq_init(gd->fdt_blob)) {
debug("%s: Failed to init CPU frequency scaling\n", __func__);
return -1;
}
#endif
#if defined CONFIG_EXYNOS_TMU
if (tmu_init(gd->fdt_blob)) {
debug("%s: Failed to init TMU\n", __func__);
return -1;
}
#endif
/* Clock Gating all the unused IP's to save power */
clock_gate();
/* Disable USB3.0 PLL to save 250mW of power */
disable_usb30_pll();
if (board_init_mkbp_devices(gd->fdt_blob))
return -1;
board_configure_analogix();
board_enable_audio_codec();
exynos_lcd_check_next_stage(gd->fdt_blob, 0);
bootstage_mark_name(BOOTSTAGE_ID_BOARD_INIT_DONE, "board_init_done");
return 0;
}
void board_init_r(gd_t *id, ulong dest_addr)
{
ulong malloc_start;
#if !defined(CONFIG_SYS_NO_FLASH)
ulong flash_size;
#endif
gd = id;
gd->flags |= GD_FLG_RELOC; /* tell others: relocation done */
bootstage_mark_name(BOOTSTAGE_ID_START_UBOOT_R, "board_init_r");
monitor_flash_len = _end_ofs;/*u-boot.lds中定义*/
/* Enable caches */
enable_caches();
debug("monitor flash len: %08lX\n", monitor_flash_len);
board_init(); /* Setup chipselects//打印一些版本信息，电源管理信息 */
/*
* TODO: printing of the clock inforamtion of the board is now
* implemented as part of bdinfo command. Currently only support for
* davinci SOC's is added. Remove this check once all the board
* implement this.
*/
#ifdef CONFIG_CLOCKS
set_cpu_clk_info(); /* Setup clock information */
#endif
#ifdef CONFIG_SERIAL_MULTI
#ifndef CONFIG_CPU_EXYNOS5410
serial_initialize();
#endif
#endif
debug("Now running in RAM - U-Boot at: %08lx\n", dest_addr);
#ifdef CONFIG_LOGBUFFER
logbuff_init_ptrs();
#endif
#ifdef CONFIG_POST
post_output_backlog();
#endif
/* The Malloc area is immediately below the monitor copy in DRAM */
malloc_start = dest_addr - TOTAL_MALLOC_LEN;
mem_malloc_init (malloc_start, TOTAL_MALLOC_LEN);
#ifdef CONFIG_ARCH_EARLY_INIT_R
arch_early_init_r();
#endif
#if !defined(CONFIG_SYS_NO_FLASH)
puts("Flash: ");
flash_size = flash_init();
if (flash_size > 0) {
# ifdef CONFIG_SYS_FLASH_CHECKSUM
char *s = getenv("flashchecksum");
print_size(flash_size, "");
/*
* Compute and print flash CRC if flashchecksum is set to 'y'
*
* NOTE: Maybe we should add some WATCHDOG_RESET()? XXX
*/
if (s && (*s == 'y')) {
printf(" CRC: %08X", crc32(0,
(const unsigned char *) CONFIG_SYS_FLASH_BASE,
flash_size));
}
putc('\n');
# else /* !CONFIG_SYS_FLASH_CHECKSUM */
print_size(flash_size, "\n");
# endif /* CONFIG_SYS_FLASH_CHECKSUM */
} else {
puts(failed);
hang();
}
#endif
#if defined(CONFIG_CMD_NAND)
puts("NAND: ");
nand_init(); /* go init the NAND */
#endif
#if defined(CONFIG_CMD_ONENAND)
onenand_init();
#endif
#ifdef CONFIG_GENERIC_MMC
puts("MMC: ");
mmc_initialize(gd->bd);
#endif
#ifdef CONFIG_HAS_DATAFLASH
AT91F_DataflashInit();
dataflash_print_info();
#endif
/* initialize environment */
env_relocate();
#if defined(CONFIG_CMD_PCI) || defined(CONFIG_PCI)
arm_pci_init();
#endif
stdio_init(); /* get the devices list going. */
jumptable_init();
#if defined(CONFIG_API)
/* Initialize API */
api_init();
#endif
console_init_r(); /* fully init console as a device */
#if defined(CONFIG_ARCH_MISC_INIT)
/* miscellaneous arch dependent initialisations */
arch_misc_init();
#endif
#if defined(CONFIG_MISC_INIT_R)
/* miscellaneous platform dependent initialisations */
misc_init_r();
#endif
/* set up exceptions */
interrupt_init();
/* enable exceptions */
enable_interrupts();
/* Perform network card initialisation if necessary */
#if defined(CONFIG_DRIVER_SMC91111) || defined (CONFIG_DRIVER_LAN91C96)
/* XXX: this needs to be moved to board init */
if (getenv("ethaddr")) {
uchar enetaddr[6];
eth_getenv_enetaddr("ethaddr", enetaddr);
smc_set_mac_addr(enetaddr);
}
#endif /* CONFIG_DRIVER_SMC91111 || CONFIG_DRIVER_LAN91C96 */
/* Initialize from environment */
load_addr = getenv_ulong("loadaddr", 16, load_addr);
#ifdef CONFIG_BOARD_LATE_INIT
board_late_init();//晚点执行的初始化在smdk5420.c
#endif
#ifdef CONFIG_BITBANGMII
bb_miiphy_init();
#endif
#if defined(CONFIG_CMD_NET)
puts("Net: ");
eth_initialize(gd->bd);
#if defined(CONFIG_RESET_PHY_R)
debug("Reset Ethernet PHY\n");
reset_phy();
#endif
#endif
#ifdef CONFIG_POST
post_run(NULL, POST_RAM | post_bootmode_get(0));
#endif
#if defined(CONFIG_PRAM) || defined(CONFIG_LOGBUFFER)
/*
* Export available size of memory for Linux,
* taking into account the protected RAM at top of memory
*/
{
ulong pram = 0;
uchar memsz[32];
#ifdef CONFIG_PRAM
pram = getenv_ulong("pram", 10, CONFIG_PRAM);
#endif
#ifdef CONFIG_LOGBUFFER
#ifndef CONFIG_ALT_LB_ADDR
/* Also take the logbuffer into account (pram is in kB) */
pram += (LOGBUFF_LEN + LOGBUFF_OVERHEAD) / 1024;
#endif
#endif
sprintf((char *)memsz, "%ldk", (gd->ram_size / 1024) - pram);
setenv("mem", (char *)memsz);
}
#endif
/* main_loop() can return to retry autoboot, if so just run it again. */
for (;;) {
main_loop();//进入命令行模式
}
/* NOTREACHED - no way out of command loop except booting */
}
int NetLoop(enum proto_t protocol)
{
bd_t *bd = gd->bd;
int ret = -1;
NetRestarted = 0;
NetDevExists = 0;
NetTryCount = 1;
debug_cond(DEBUG_INT_STATE, "--- NetLoop Entry\n");
bootstage_mark_name(BOOTSTAGE_ID_ETH_START, "eth_start");
net_init();
if (eth_is_on_demand_init() || protocol != NETCONS) {
eth_halt();
eth_set_current();
if (eth_init(bd) < 0) {
eth_halt();
return -1;
}
} else
eth_init_state_only(bd);
restart:
#ifdef CONFIG_USB_KEYBOARD
net_busy_flag = 0;
#endif
net_set_state(NETLOOP_CONTINUE);
/*
* Start the ball rolling with the given start function. From
* here on, this code is a state machine driven by received
* packets and timer events.
*/
debug_cond(DEBUG_INT_STATE, "--- NetLoop Init\n");
NetInitLoop();
switch (net_check_prereq(protocol)) {
case 1:
/* network not configured */
eth_halt();
return -1;
case 2:
/* network device not configured */
break;
case 0:
NetDevExists = 1;
NetBootFileXferSize = 0;
switch (protocol) {
case TFTPGET:
#ifdef CONFIG_CMD_TFTPPUT
case TFTPPUT:
#endif
/* always use ARP to get server ethernet address */
TftpStart(protocol);
break;
#ifdef CONFIG_CMD_TFTPSRV
case TFTPSRV:
TftpStartServer();
break;
#endif
#if defined(CONFIG_CMD_DHCP)
case DHCP:
BootpReset();
NetOurIP = 0;
DhcpRequest(); /* Basically same as BOOTP */
break;
#endif
case BOOTP:
BootpReset();
NetOurIP = 0;
BootpRequest();
break;
#if defined(CONFIG_CMD_RARP)
case RARP:
RarpTry = 0;
NetOurIP = 0;
RarpRequest();
break;
#endif
#if defined(CONFIG_CMD_PING)
case PING:
ping_start();
break;
#endif
#if defined(CONFIG_CMD_NFS)
case NFS:
NfsStart();
break;
#endif
#if defined(CONFIG_CMD_CDP)
case CDP:
CDPStart();
break;
#endif
#if defined (CONFIG_NETCONSOLE) && !(CONFIG_SPL_BUILD)
case NETCONS:
NcStart();
break;
#endif
#if defined(CONFIG_CMD_SNTP)
case SNTP:
SntpStart();
break;
#endif
#if defined(CONFIG_CMD_DNS)
case DNS:
DnsStart();
break;
#endif
#if defined(CONFIG_CMD_LINK_LOCAL)
case LINKLOCAL:
link_local_start();
break;
#endif
default:
break;
}
break;
}
#if defined(CONFIG_MII) || defined(CONFIG_CMD_MII)
#if defined(CONFIG_SYS_FAULT_ECHO_LINK_DOWN) && \
defined(CONFIG_STATUS_LED) && \
defined(STATUS_LED_RED)
/*
* Echo the inverted link state to the fault LED.
*/
if (miiphy_link(eth_get_dev()->name, CONFIG_SYS_FAULT_MII_ADDR))
status_led_set(STATUS_LED_RED, STATUS_LED_OFF);
else
status_led_set(STATUS_LED_RED, STATUS_LED_ON);
#endif /* CONFIG_SYS_FAULT_ECHO_LINK_DOWN, ... */
#endif /* CONFIG_MII, ... */
#ifdef CONFIG_USB_KEYBOARD
net_busy_flag = 1;
#endif
/*
* Main packet reception loop. Loop receiving packets until
* someone sets `net_state' to a state that terminates.
*/
for (;;) {
WATCHDOG_RESET();
#ifdef CONFIG_SHOW_ACTIVITY
show_activity(1);
#endif
/*
* Check the ethernet for a new packet. The ethernet
* receive routine will process it.
*/
eth_rx();
/*
* Abort if ctrl-c was pressed.
*/
if (ctrlc()) {
/* cancel any ARP that may not have completed */
NetArpWaitPacketIP = 0;
net_cleanup_loop();
eth_halt();
/* Invalidate the last protocol */
eth_set_last_protocol(BOOTP);
puts("\nAbort\n");
/* include a debug print as well incase the debug
messages are directed to stderr */
debug_cond(DEBUG_INT_STATE, "--- NetLoop Abort!\n");
goto done;
}
ArpTimeoutCheck();
/*
* Check for a timeout, and run the timeout handler
* if we have one.
*/
if (timeHandler && ((get_timer(0) - timeStart) > timeDelta)) {
thand_f *x;
#if defined(CONFIG_MII) || defined(CONFIG_CMD_MII)
#if defined(CONFIG_SYS_FAULT_ECHO_LINK_DOWN) && \
defined(CONFIG_STATUS_LED) && \
defined(STATUS_LED_RED)
/*
* Echo the inverted link state to the fault LED.
*/
if (miiphy_link(eth_get_dev()->name,
CONFIG_SYS_FAULT_MII_ADDR)) {
status_led_set(STATUS_LED_RED, STATUS_LED_OFF);
} else {
status_led_set(STATUS_LED_RED, STATUS_LED_ON);
}
#endif /* CONFIG_SYS_FAULT_ECHO_LINK_DOWN, ... */
#endif /* CONFIG_MII, ... */
debug_cond(DEBUG_INT_STATE, "--- NetLoop timeout\n");
x = timeHandler;
timeHandler = (thand_f *)0;
(*x)();
}
switch (net_state) {
case NETLOOP_RESTART:
NetRestarted = 1;
goto restart;
case NETLOOP_SUCCESS:
net_cleanup_loop();
if (NetBootFileXferSize > 0) {
printf("Bytes transferred = %ld (%lx hex)\n",
NetBootFileXferSize,
NetBootFileXferSize);
setenv_hex("filesize", NetBootFileXferSize);
setenv_hex("fileaddr", load_addr);
}
if (protocol != NETCONS)
eth_halt();
else
eth_halt_state_only();
eth_set_last_protocol(protocol);
ret = NetBootFileXferSize;
debug_cond(DEBUG_INT_STATE, "--- NetLoop Success!\n");
goto done;
case NETLOOP_FAIL:
net_cleanup_loop();
/* Invalidate the last protocol */
eth_set_last_protocol(BOOTP);
debug_cond(DEBUG_INT_STATE, "--- NetLoop Fail!\n");
goto done;
case NETLOOP_CONTINUE:
continue;
}
}
done:
#ifdef CONFIG_USB_KEYBOARD
net_busy_flag = 0;
#endif
#ifdef CONFIG_CMD_TFTPPUT
/* Clear out the handlers */
net_set_udp_handler(NULL);
net_set_icmp_handler(NULL);
#endif
return ret;
}
/* Record the board_init_f() bootstage (after arch_cpu_init()) */
static int mark_bootstage(void)
{
bootstage_mark_name(BOOTSTAGE_ID_START_UBOOT_F, "board_init_f");
return 0;
}
static int initr_bootstage(void)
{
bootstage_mark_name(BOOTSTAGE_ID_START_UBOOT_R, "board_init_r");
return 0;
}
void board_init_r(gd_t *id, ulong dest_addr)
{
ulong malloc_start;
#if !defined(CONFIG_SYS_NO_FLASH)
ulong flash_size;
#endif
gd->flags |= GD_FLG_RELOC; /* tell others: relocation done */
bootstage_mark_name(BOOTSTAGE_ID_START_UBOOT_R, "board_init_r");
monitor_flash_len = (ulong)&__rel_dyn_end - (ulong)_start;
/* Enable caches */
enable_caches();
debug("monitor flash len: %08lX\n", monitor_flash_len);
board_init(); /* Setup chipselects */
/*
* TODO: printing of the clock inforamtion of the board is now
* implemented as part of bdinfo command. Currently only support for
* davinci SOC's is added. Remove this check once all the board
* implement this.
*/
#ifdef CONFIG_CLOCKS
set_cpu_clk_info(); /* Setup clock information */
#endif
serial_initialize();
debug("Now running in RAM - U-Boot at: %08lx\n", dest_addr);
#ifdef CONFIG_LOGBUFFER
logbuff_init_ptrs();
#endif
#ifdef CONFIG_POST
post_output_backlog();
#endif
/* The Malloc area is immediately below the monitor copy in DRAM */
malloc_start = dest_addr - TOTAL_MALLOC_LEN;
mem_malloc_init (malloc_start, TOTAL_MALLOC_LEN);
#ifdef CONFIG_ARCH_EARLY_INIT_R
arch_early_init_r();
#endif
power_init_board();
#if !defined(CONFIG_SYS_NO_FLASH)
puts("Flash: ");
flash_size = flash_init();
if (flash_size > 0) {
# ifdef CONFIG_SYS_FLASH_CHECKSUM
print_size(flash_size, "");
/*
* Compute and print flash CRC if flashchecksum is set to 'y'
*
* NOTE: Maybe we should add some WATCHDOG_RESET()? XXX
*/
if (getenv_yesno("flashchecksum") == 1) {
printf(" CRC: %08X", crc32(0,
(const unsigned char *) CONFIG_SYS_FLASH_BASE,
flash_size));
}
putc('\n');
# else /* !CONFIG_SYS_FLASH_CHECKSUM */
print_size(flash_size, "\n");
# endif /* CONFIG_SYS_FLASH_CHECKSUM */
} else {
puts(failed);
hang();
}
#endif
#if defined(CONFIG_CMD_NAND)
puts("NAND: ");
nand_init(); /* go init the NAND */
#endif
#if defined(CONFIG_CMD_ONENAND)
onenand_init();
#endif
#ifdef CONFIG_GENERIC_MMC
puts("MMC: ");
mmc_initialize(gd->bd);
#endif
#ifdef CONFIG_CMD_SCSI
puts("SCSI: ");
scsi_init();
#endif
#ifdef CONFIG_HAS_DATAFLASH
AT91F_DataflashInit();
dataflash_print_info();
#endif
/* initialize environment */
if (should_load_env())
env_relocate();
else
set_default_env(NULL);
#if defined(CONFIG_CMD_PCI) || defined(CONFIG_PCI)
arm_pci_init();
#endif
stdio_init(); /* get the devices list going. */
jumptable_init();
#if defined(CONFIG_API)
/* Initialize API */
api_init();
#endif
console_init_r(); /* fully init console as a device */
#ifdef CONFIG_DISPLAY_BOARDINFO_LATE
# ifdef CONFIG_OF_CONTROL
/* Put this here so it appears on the LCD, now it is ready */
display_fdt_model(gd->fdt_blob);
# else
checkboard();
# endif
#endif
#if defined(CONFIG_ARCH_MISC_INIT)
/* miscellaneous arch dependent initialisations */
arch_misc_init();
#endif
#if defined(CONFIG_MISC_INIT_R)
/* miscellaneous platform dependent initialisations */
misc_init_r();
#endif
/* set up exceptions */
interrupt_init();
/* enable exceptions */
enable_interrupts();
/* Initialize from environment */
load_addr = getenv_ulong("loadaddr", 16, load_addr);
#ifdef CONFIG_BOARD_LATE_INIT
board_late_init();
#endif
#ifdef CONFIG_FASTBOOT
fastboot_setup();
#endif
#ifdef CONFIG_BITBANGMII
bb_miiphy_init();
#endif
#if defined(CONFIG_CMD_NET)
puts("Net: ");
eth_initialize(gd->bd);
#if defined(CONFIG_RESET_PHY_R)
debug("Reset Ethernet PHY\n");
reset_phy();
#endif
#endif
#ifdef CONFIG_POST
post_run(NULL, POST_RAM | post_bootmode_get(0));
#endif
#if defined(CONFIG_PRAM) || defined(CONFIG_LOGBUFFER)
/*
* Export available size of memory for Linux,
* taking into account the protected RAM at top of memory
*/
{
ulong pram = 0;
uchar memsz[32];
#ifdef CONFIG_PRAM
pram = getenv_ulong("pram", 10, CONFIG_PRAM);
#endif
#ifdef CONFIG_LOGBUFFER
#ifndef CONFIG_ALT_LB_ADDR
/* Also take the logbuffer into account (pram is in kB) */
pram += (LOGBUFF_LEN + LOGBUFF_OVERHEAD) / 1024;
#endif
#endif
sprintf((char *)memsz, "%ldk", (gd->ram_size / 1024) - pram);
setenv("mem", (char *)memsz);
}
#endif
#ifdef CONFIG_FASTBOOT
check_fastboot();
#endif
/* main_loop() can return to retry autoboot, if so just run it again. */
for (;;) {
main_loop();
}
/* NOTREACHED - no way out of command loop except booting */
}
void board_init_r(gd_t *dummy1, ulong dummy2)
{
u32 spl_boot_list[] = {
BOOT_DEVICE_NONE,
BOOT_DEVICE_NONE,
BOOT_DEVICE_NONE,
BOOT_DEVICE_NONE,
BOOT_DEVICE_NONE,
};
struct spl_image_info spl_image;
debug(">>spl:board_init_r()\n");
spl_set_bd();
#ifdef CONFIG_SPL_OS_BOOT
dram_init_banksize();
#endif
#if defined(CONFIG_SYS_SPL_MALLOC_START)
mem_malloc_init(CONFIG_SYS_SPL_MALLOC_START,
CONFIG_SYS_SPL_MALLOC_SIZE);
gd->flags |= GD_FLG_FULL_MALLOC_INIT;
#endif
if (!(gd->flags & GD_FLG_SPL_INIT)) {
if (spl_init())
hang();
}
#if !defined(CONFIG_PPC) && !defined(CONFIG_ARCH_MX6)
/*
* timer_init() does not exist on PPC systems. The timer is initialized
* and enabled (decrementer) in interrupt_init() here.
*/
timer_init();
#endif
#ifdef CONFIG_SPL_BOARD_INIT
spl_board_init();
#endif
memset(&spl_image, '\0', sizeof(spl_image));
#ifdef CONFIG_SYS_SPL_ARGS_ADDR
spl_image.arg = (void *)CONFIG_SYS_SPL_ARGS_ADDR;
#endif
board_boot_order(spl_boot_list);
if (boot_from_devices(&spl_image, spl_boot_list,
ARRAY_SIZE(spl_boot_list))) {
puts("SPL: failed to boot from all boot devices\n");
hang();
}
#ifdef CONFIG_CPU_V7M
spl_image.entry_point |= 0x1;
#endif
switch (spl_image.os) {
case IH_OS_U_BOOT:
debug("Jumping to U-Boot\n");
break;
#if CONFIG_IS_ENABLED(ATF)
case IH_OS_ARM_TRUSTED_FIRMWARE:
debug("Jumping to U-Boot via ARM Trusted Firmware\n");
spl_invoke_atf(&spl_image);
break;
#endif
#ifdef CONFIG_SPL_OS_BOOT
case IH_OS_LINUX:
debug("Jumping to Linux\n");
spl_fixup_fdt();
spl_board_prepare_for_linux();
jump_to_image_linux(&spl_image);
#endif
default:
debug("Unsupported OS image.. Jumping nevertheless..\n");
}
#if CONFIG_VAL(SYS_MALLOC_F_LEN) && !defined(CONFIG_SYS_SPL_MALLOC_SIZE)
debug("SPL malloc() used %#lx bytes (%ld KB)\n", gd->malloc_ptr,
gd->malloc_ptr / 1024);
#endif
#ifdef CONFIG_BOOTSTAGE_STASH
int ret;
bootstage_mark_name(BOOTSTAGE_ID_END_SPL, "end_spl");
ret = bootstage_stash((void *)CONFIG_BOOTSTAGE_STASH_ADDR,
CONFIG_BOOTSTAGE_STASH_SIZE);
if (ret)
debug("Failed to stash bootstage: err=%d\n", ret);
#endif
debug("loaded - jumping to U-Boot...\n");
spl_board_prepare_for_boot();
jump_to_image_no_args(&spl_image);
}
