예제 #1
0
int main(int argc, char *argv[])
{
	int opt, sock, dev_id, lap = 0, uap = 0, delay = 5;
	int have_lap = 0;
	int have_uap = 0;
	int afh_enabled = 0;
	uint8_t mode, afh_map[10];
	char *end, ubertooth_device = -1;
	char *bt_dev = "hci0";
    char addr[19] = { 0 };
	struct libusb_device_handle *devh = NULL;
	uint32_t clock;
	uint16_t accuracy, handle, offset;
	bdaddr_t bdaddr;
	btbb_piconet *pn;
	struct hci_dev_info di;
	int cc = 0;


	pn = btbb_piconet_new();

	while ((opt=getopt(argc,argv,"hl:u:U:e:d:ab:w:")) != EOF) {
		switch(opt) {
		case 'l':
			lap = strtol(optarg, &end, 16);
			if (end != optarg) {
				++have_lap;
			}
			break;
		case 'u':
			uap = strtol(optarg, &end, 16);
			if (end != optarg) {
				++have_uap;
			}
			break;
		case 'U':
			ubertooth_device = atoi(optarg);
			break;
		case 'e':
			max_ac_errors = atoi(optarg);
			break;
		case 'd':
			dumpfile = fopen(optarg, "w");
			if (dumpfile == NULL) {
				perror(optarg);
				return 1;
			}
			break;
		case 'a':
			afh_enabled = 1;
			break;
		case 'b':
			bt_dev = optarg;
			if (bt_dev == NULL) {
				perror(optarg);
				return 1;
			}
			break;
		case 'w': //wait
			delay = atoi(optarg);
			break;
		case 'h':
		default:
			usage();
			return 1;
		}
	}

	dev_id = hci_devid(bt_dev);
	sock = hci_open_dev(dev_id);
	hci_read_clock(sock, 0, 0, &clock, &accuracy, 0);

	if ((have_lap != 1) || (have_uap != 1)) {
		printf("No address given, reading address from device\n");
		hci_read_bd_addr(sock, &bdaddr, 0);
		lap = bdaddr.b[0] | bdaddr.b[1] << 8 | bdaddr.b[2] << 16;
		btbb_init_piconet(pn, lap);
		uap = bdaddr.b[3];
		btbb_piconet_set_uap(pn, uap);
		printf("LAP=%06x UAP=%02x\n", lap, uap);
	} else if (have_lap && have_uap) {
		btbb_init_piconet(pn, lap);
		btbb_piconet_set_uap(pn, uap);
		printf("Address given, assuming address is remote\n");
		sprintf(addr, "00:00:%02X:%02X:%02X:%02X",
			uap,
			(lap >> 16) & 0xFF,
			(lap >> 8) & 0xFF,
			lap & 0xFF
		);
		str2ba(addr, &bdaddr);
		printf("Address: %s\n", addr);
	
		if (hci_devinfo(dev_id, &di) < 0) {
			perror("Can't get device info");
			return 1;
		}

		if (hci_create_connection(sock, &bdaddr,
					htobs(di.pkt_type & ACL_PTYPE_MASK),
					0, 0x01, &handle, 25000) < 0) {
			perror("Can't create connection");
			return 1;
		}
		sleep(1);
		cc = 1;

		if (hci_read_clock_offset(sock, handle, &offset, 1000) < 0) {
			perror("Reading clock offset failed");
		}
		clock += offset;

		//Experimental AFH map reading from remote device
		if(afh_enabled) {
			if(hci_read_afh_map(sock, handle, &mode, afh_map, 1000) < 0) {
				perror("HCI read AFH map request failed");
				//exit(1);
			}
			if(mode == 0x01) {
				btbb_piconet_set_afh_map(pn, afh_map);
				btbb_print_afh_map(pn);
			} else {
				printf("AFH disabled.\n");
				afh_enabled = 0;
			}
		}
		if (cc) {
			usleep(10000);
			hci_disconnect(sock, handle, HCI_OE_USER_ENDED_CONNECTION, 10000);
		}
	} else {
예제 #2
0
int main(int argc, char *argv[])
{
	int opt, sock, dev_id, lap = 0, uap = 0, delay = 5;
	int have_lap = 0;
	int have_uap = 0;
	int afh_enabled = 0;
	uint8_t mode, afh_map[10];
	char *end, ubertooth_device = -1;
	char *bt_dev = "hci0";
    char addr[19] = { 0 };
	uint32_t clock;
	uint16_t accuracy, handle, offset;
	bdaddr_t bdaddr;
	btbb_piconet *pn;
	struct hci_dev_info di;
	int cc = 0;


	pn = btbb_piconet_new();

	while ((opt=getopt(argc,argv,"hl:u:U:e:d:ab:w:r:q:")) != EOF) {
		switch(opt) {
		case 'l':
			lap = strtol(optarg, &end, 16);
			if (end != optarg) {
				++have_lap;
			}
			break;
		case 'u':
			uap = strtol(optarg, &end, 16);
			if (end != optarg) {
				++have_uap;
			}
			break;
		case 'U':
			ubertooth_device = atoi(optarg);
			break;
		case 'r':
			if (!h_pcapng_bredr) {
				if (btbb_pcapng_create_file( optarg, "Ubertooth", &h_pcapng_bredr )) {
					err(1, "create_bredr_capture_file: ");
				}
			}
			else {
				printf("Ignoring extra capture file: %s\n", optarg);
			}
			break;
#ifdef ENABLE_PCAP
		case 'q':
			if (!h_pcap_bredr) {
				if (btbb_pcap_create_file(optarg, &h_pcap_bredr)) {
					err(1, "btbb_pcap_create_file: ");
				}
			}
			else {
				printf("Ignoring extra capture file: %s\n", optarg);
			}
			break;
#endif
		case 'e':
			max_ac_errors = atoi(optarg);
			break;
		case 'd':
			dumpfile = fopen(optarg, "w");
			if (dumpfile == NULL) {
				perror(optarg);
				return 1;
			}
			break;
		case 'a':
			afh_enabled = 1;
			break;
		case 'b':
			bt_dev = optarg;
			if (bt_dev == NULL) {
				perror(optarg);
				return 1;
			}
			break;
		case 'w': //wait
			delay = atoi(optarg);
			break;
		case 'h':
		default:
			usage();
			return 1;
		}
	}

	dev_id = hci_devid(bt_dev);
	sock = hci_open_dev(dev_id);
	hci_read_clock(sock, 0, 0, &clock, &accuracy, 0);

	if ((have_lap != 1) || (have_uap != 1)) {
		printf("No address given, reading address from device\n");
		hci_read_bd_addr(sock, &bdaddr, 0);
		lap = bdaddr.b[0] | bdaddr.b[1] << 8 | bdaddr.b[2] << 16;
		btbb_init_piconet(pn, lap);
		uap = bdaddr.b[3];
		btbb_piconet_set_uap(pn, uap);
		printf("LAP=%06x UAP=%02x\n", lap, uap);
	} else if (have_lap && have_uap) {
		btbb_init_piconet(pn, lap);
		btbb_piconet_set_uap(pn, uap);
		printf("Address given, assuming address is remote\n");
		sprintf(addr, "00:00:%02X:%02X:%02X:%02X",
			uap,
			(lap >> 16) & 0xFF,
			(lap >> 8) & 0xFF,
			lap & 0xFF
		);
		str2ba(addr, &bdaddr);
		printf("Address: %s\n", addr);
	
		if (hci_devinfo(dev_id, &di) < 0) {
			perror("Can't get device info");
			return 1;
		}

		if (hci_create_connection(sock, &bdaddr,
					htobs(di.pkt_type & ACL_PTYPE_MASK),
					0, 0x01, &handle, 25000) < 0) {
			perror("Can't create connection");
			return 1;
		}
		sleep(1);
		cc = 1;

		if (hci_read_clock_offset(sock, handle, &offset, 1000) < 0) {
			perror("Reading clock offset failed");
		}
		clock += offset;
	} else {
예제 #3
0
int main(int argc, char *argv[])
{
	int opt, have_lap = 0, have_uap = 0;
	int timeout = 0;
	int reset_scan = 0;
	char *end;
	char ubertooth_device = -1;
	btbb_piconet *pn = NULL;
	uint32_t lap = 0;
	uint8_t uap = 0;

	while ((opt=getopt(argc,argv,"hVi:l:u:U:d:e:r:sq:t:")) != EOF) {
		switch(opt) {
		case 'i':
			infile = fopen(optarg, "r");
			if (infile == NULL) {
				printf("Could not open file %s\n", optarg);
				usage();
				return 1;
			}
			break;
		case 'l':
			lap = strtol(optarg, &end, 16);
			have_lap++;
			break;
		case 'u':
			uap = strtol(optarg, &end, 16);
			have_uap++;
			break;
		case 'U':
			ubertooth_device = atoi(optarg);
			break;
		case 'r':
			if (!h_pcapng_bredr) {
				if (btbb_pcapng_create_file( optarg, "Ubertooth", &h_pcapng_bredr )) {
					err(1, "create_bredr_capture_file: ");
				}
			}
			else {
				printf("Ignoring extra capture file: %s\n", optarg);
			}
			break;
#ifdef ENABLE_PCAP
		case 'q':
			if (!h_pcap_bredr) {
				if (btbb_pcap_create_file(optarg, &h_pcap_bredr)) {
					err(1, "btbb_pcap_create_file: ");
				}
			}
			else {
				printf("Ignoring extra capture file: %s\n", optarg);
			}
			break;
#endif
		case 'd':
			dumpfile = fopen(optarg, "w");
			if (dumpfile == NULL) {
				perror(optarg);
				return 1;
			}
			break;
		case 'e':
			max_ac_errors = atoi(optarg);
			break;
		case 's':
			++reset_scan;
			break;
		case 't':
			timeout = atoi(optarg);
			break;
		case 'V':
			print_version();
			return 0;
		case 'h':
		default:
			usage();
			return 1;
		}
	}

	if (have_lap) {
		pn = btbb_piconet_new();
		btbb_init_piconet(pn, lap);
		if (have_uap)
			btbb_piconet_set_uap(pn, uap);
		if (h_pcapng_bredr) {
			btbb_pcapng_record_bdaddr(h_pcapng_bredr,
						  (((uint32_t)uap)<<24)|lap,
						  have_uap ? 0xff : 0x00, 0);
		}
	} else if (have_uap) {
		printf("Error: UAP but no LAP specified\n");
		usage();
		return 1;
	}

	if (infile == NULL) {
		devh = ubertooth_start(ubertooth_device);
		if (devh == NULL) {
			usage();
			return 1;
		}

		/* Scan all frequencies. Same effect as
		 * ubertooth-utils -c9999. This is necessary after
		 * following a piconet. */
		if (reset_scan) {
			cmd_set_channel(devh, 9999);
		}

		/* Clean up on exit. */
		register_cleanup_handler(devh);

		rx_live(devh, pn, timeout);

		// Print AFH map from piconet if we have one
		if (pn)
			btbb_print_afh_map(pn);

		ubertooth_stop(devh);
	} else {
		rx_file(infile, pn);
		fclose(infile);
	}

	return 0;
}
예제 #4
0
int main(int argc, char *argv[])
{
	int opt, have_lap = 0, have_uap = 0;
	int reset_scan = 0;
	char *end;
	char ubertooth_device = -1;
	btbb_piconet *pn = NULL;
	uint32_t lap;
	uint8_t uap;

	while ((opt=getopt(argc,argv,"hi:l:u:U:d:e:sc:")) != EOF) {
		switch(opt) {
		case 'i':
			infile = fopen(optarg, "r");
			if (infile == NULL) {
				printf("Could not open file %s\n", optarg);
				usage();
				return 1;
			}
			break;
		case 'l':
			lap = strtol(optarg, &end, 16);
			have_lap++;
			break;
		case 'u':
			uap = strtol(optarg, &end, 16);
			have_uap++;
			break;
		case 'U':
			ubertooth_device = atoi(optarg);
			break;
		case 'c':
#ifdef USE_PCAP
			pcap_dumpfile = pcap_open_dead(DLT_PPI, 128);
			if (pcap_dumpfile == NULL)
				err(1, "pcap_open_dead: ");
			dumper = pcap_dump_open(pcap_dumpfile, optarg);
			pcap_dump_flush(dumper);
			if (dumper == NULL) {
				warn("pcap_dump_open");
				pcap_close(pcap_dumpfile);
				exit(1);
			}
#else
                        printf("Not compiled with 'USE_PCAP', -c ignored\n");
#endif // USE_PCAP
			break;
		case 'd':
			dumpfile = fopen(optarg, "w");
			if (dumpfile == NULL) {
				perror(optarg);
				return 1;
			}
			break;
		case 'e':
			max_ac_errors = atoi(optarg);
			break;
		case 's':
			++reset_scan;
			break;
		case 'h':
		default:
			usage();
			return 1;
		}
	}
	
	if (have_lap) {
		pn = btbb_piconet_new();
		btbb_init_piconet(pn, lap);
		if (have_uap)
			btbb_piconet_set_uap(pn, uap);
	} else if (have_uap) {
		printf("Error: UAP but no LAP specified\n");
		usage();
		return 1;
	}

	if (infile == NULL) {
		devh = ubertooth_start(ubertooth_device);
		if (devh == NULL) {
			usage();
			return 1;
		}

		/* Scan all frequencies. Same effect as
		 * ubertooth-utils -c9999. This is necessary after
		 * following a piconet. */
		if (reset_scan) {
			cmd_set_channel(devh, 9999);
		}

		/* Clean up on exit. */
		signal(SIGINT,cleanup);
		signal(SIGQUIT,cleanup);
		signal(SIGTERM,cleanup);

		rx_live(devh, pn, 0);

		// Print AFH map from piconet if we have one
		if (pn)
			btbb_print_afh_map(pn);

		ubertooth_stop(devh);
	} else {
		rx_file(infile, pn);
		fclose(infile);
	}

	return 0;
}