/**
* Get the next byte in the RX buffer. Before calling this function, the
* i2c1IsGetReady() function should be called to check if there is any
* data available.
*
* @return Returns next byte in receive buffer.
*/
BYTE i2c1BusGetByte(void) {
BYTE c;
if (busRxBufHasData(BUSID1)) {
c = busPeekByteRxBuf(BUSID1);
busRemoveByteRxBuf(BUSID1);
}
return c;
}
/**
* Get the next byte in the RX buffer. Before calling this function, the
* serIsGetReady() function should be called to check if there is any
* data available on the serial port.
*
* @preCondition serIsGetReady() must be called before calling this function to
* confirm the receive buffer has data!
*
* @return Returns byte received via the serial port.
*/
BYTE serGetByte(void) {
BYTE c;
if (busRxBufHasData(BUSID)) {
c = busPeekByteRxBuf(BUSID);
busRemoveByteRxBuf(BUSID);
}
return c;
}
/**
* Must be called every couple of ms
*
*/
void busTask(void) {
BYTE c;
BYTE bytesRead;
BYTE busId;
BYTE linkedMask;
/////////////////////////////////////////////////
//UDP 1
//Get bus to link to UDP 1
busId = appcfgGetc(BUSCFG_UDP1_LINK);
#if defined(BRD_SBC65EC)
//Currently UDP 1 can only be linked to Serial 1, Serial 2 and I2C for SBC65EC
if ((busId >= BUSID_SER1) && (busId <= BUSID_I2C1) && (udpBus1 != INVALID_UDP_SOCKET)) {
#else
//Currently UDP 1 can only be linked to Serial 1 and I2C for SBC68EC
if ( ((busId == BUSID_SER1) || (busId == BUSID_I2C1)) && (udpBus1 != INVALID_UDP_SOCKET)) {
#endif
//Is there any data waiting for us on this UDP port?
if (UDPIsGetReady(udpBus1)) {
if (busIsEnabled(busId)) {
//Read bytes
while (UDPGet(&c)) {
//Wait until a byte is transmitted by the interrupt routine and buffer has place again.
while (busIsTxBufFull(busId)) {
busService(busId);
FAST_USER_PROCESS();
}
//Add byte to TX buffer, and update buffer pointers
busPutByteTxBuf(busId, c);
}
//Initiate transmitting if not already transmitting
if (!busIsTxing(busId)) {
busService(busId);
}
}
//Discard the socket buffer.
UDPDiscard();
}
//Is there any data to send on UDP port
if(busRxBufHasData(busId)) {
if (UDPIsPutReady(udpBus1)) {
while(busRxBufHasData(busId)) {
//Read and remove byte from buffer
c = busPeekByteRxBuf(busId);
busRemoveByteRxBuf(busId);
UDPPut(c);
}
// Now transmit it.
UDPFlush();
}
}
}
/////////////////////////////////////////////////
//UDP 2
//Get bus to link to UDP 2
busId = appcfgGetc(BUSCFG_UDP2_LINK);
#if defined(BRD_SBC65EC)
//Currently UDP 1 can only be linked to Serial 1, Serial 2 and I2C for SBC65EC
if ((busId >= BUSID_SER1) && (busId <= BUSID_I2C1) && (udpBus1 != INVALID_UDP_SOCKET)) {
#else
//Currently UDP 1 can only be linked to Serial 1 and I2C for SBC68EC
if ( ((busId == BUSID_SER1) || (busId == BUSID_I2C1)) && (udpBus1 != INVALID_UDP_SOCKET)) {
#endif
//Is there any data waiting for us on this UDP port?
if (UDPIsGetReady(udpBus2)) {
if (busIsEnabled(busId)) {
//Read bytes
while (UDPGet(&c)) {
//Wait until a byte is transmitted by the interrupt routine and buffer has place again.
while (busIsTxBufFull(busId)) {
busService(busId);
FAST_USER_PROCESS();
}
//Add byte to TX buffer, and update buffer pointers
busPutByteTxBuf(busId, c);
}
//Initiate transmitting if not already transmitting
if (!busIsTxing(busId)) {
busService(busId);
}
}
//Discard the socket buffer.
UDPDiscard();
}
//Is there any data to send on UDP port
if(busRxBufHasData(busId)) {
if (UDPIsPutReady(udpBus2)) {
while(busRxBufHasData(busId)) {
//Read and remove byte from buffer
c = busPeekByteRxBuf(busId);
busRemoveByteRxBuf(busId);
UDPPut(c);
}
// Now transmit it.
UDPFlush();
}
}
}
/////////////////////////////////////////////////
//Service all serial buses
for (busId=0; busId<BUS_COUNT; busId++) {
busService(busId);
}
}
/**
* Service the given bus. If our code has a section where it has to wait for the transmit
* buffer of a bus to be empties, it should call this function while waiting.
*
* @param busId The bus ID of the requested bus. Is a BUSID_XXX variable
*
*/
void busService(BYTE busId) {
switch(busId) {
case BUSID_SER1:
serService();
break;
#if defined(BRD_SBC65EC)
case BUSID_SER2:
ser2Service();
break;
#endif
case BUSID_I2C1:
i2cBusService();
break;
case BUSID_SPI1:
NOP();
break;
}
}
/**
* Gets a byte at the given offset from the Transmit Buffer, without removing it.
* The byte is NOT removed from the buffer, and the buffer pointers are NOT updated!
* The byte at the given offset it returned. The offset is how deep the byte is in
* the buffer. For example, 0 will return first byte in buffer, 5 will return the 6th
* byte in the buffer.
*
* @preCondition Ensure offset parameter is not larger than current number of bytes
* contained in buffer. Call busGetTxBufCount() to get current number of bytes in buffer.
*
* @param busId The bus ID of the requested bus. Is a BUSID_XXX variable
* @param offset Offset of byte to return. Is a value from 0-n, where n = (busGetTxBufCount() - 1)
*
* @return Returns the byte at the given offset in the given bus's Transmit buffer.
*/
BYTE busPeekByteTxBufAt(BYTE busId, BYTE offset) {
BYTE ofst;
ofst = busInfo.buf[busId].getTx + offset;
//Check if offset wrap around
if (ofst >= busInfo.buf[busId].txBufSize) {
ofst = ofst - busInfo.buf[busId].txBufSize;
}
return *(busInfo.buf[busId].txBuf + ofst);
}
/**
* Gets a byte at the given offset from the Receive Buffer, without removing it.
* The byte is NOT removed from the buffer, and the buffer pointers are NOT updated!
* The byte at the given offset it returned. The offset is how deep the byte is in
* the buffer. For example, 0 will return first byte in buffer, 5 will return the 6th
* byte in the buffer.
*
* @preCondition Ensure offset parameter is not larger than current number of bytes
* contained in buffer. Call busGetRxBufCount() to get current number of bytes in buffer.
*
* @param busId The bus ID of the requested bus. Is a BUSID_XXX variable
* @param offset Offset of byte to return. Is a value from 0-n, where n = (busGetRxBufCount() - 1)
*
* @return Returns the byte at the given offset in the given bus's Receive buffer.
*/
BYTE busPeekByteRxBufAt(BYTE busId, BYTE offset) {
BYTE ofst;
ofst = busInfo.buf[busId].getRx + offset;
//Check if offset wrap around
if (ofst >= busInfo.buf[busId].rxBufSize) {
ofst = ofst - busInfo.buf[busId].rxBufSize;
}
return *(busInfo.buf[busId].rxBuf + ofst);
}