void test_handle_message(struct cfw_message * msg, void * param)
{
cfw_log("%s:%s for param: %s conn:%p id:%d\n", __FILE__, __func__,
(char*) param, msg->conn, CFW_MESSAGE_ID(msg));
//cfw_dump_message(msg);
switch (CFW_MESSAGE_ID(msg)) {
case MSG_ID_CFW_REGISTER_SVC_AVAIL_EVT_RSP:
break;
case MSG_ID_CFW_SVC_AVAIL_EVT: {
int svc_id = ((cfw_svc_available_evt_msg_t *)msg)->service_id;
if (svc_id == SOC_GPIO_SERVICE_ID) {
cfw_open_service_conn(client, SOC_GPIO_SERVICE_ID, "Conn1");
}
break;
}
case MSG_ID_CFW_OPEN_SERVICE_RSP: {
cfw_log("%s:%s for conn: %s\n", __FILE__, __func__,
(char*) CFW_MESSAGE_PRIV(msg));
cfw_open_conn_rsp_msg_t * cnf = (cfw_open_conn_rsp_msg_t*) msg;
gpio_service_conn = cnf->service_conn;
gpio_configure(gpio_service_conn, 26, 1, NULL);
break;
}
case MSG_ID_GPIO_CONFIGURE_RSP:
gpio_set_state(gpio_service_conn, 26, 1, NULL);
break;
case MSG_ID_GPIO_SET_RSP: {
int val;
void * next;
if (!((int) CFW_MESSAGE_PRIV(msg))) {
val = 0;
next = (void*) 1;
} else {
val = 1;
next = (void*) 0;
}
printf("Got response: %d %d \n", val, (int) next);
if (count ++ > 100) {
cfw_close_service_conn(gpio_service_conn, NULL);
} else {
gpio_set_state(gpio_service_conn, 26, val, next);
}
}
break;
case MSG_ID_CFW_CLOSE_SERVICE_RSP: {
cfw_close_conn_rsp_msg_t * resp = (cfw_close_conn_rsp_msg_t*) msg;
cfw_log("%s: res: %d\n", __func__, resp->rsp_header.status);
exit(0);
}
break;
default: {
cfw_log("%s: Unhandled message: %d\n", __func__, CFW_MESSAGE_ID(msg));
break;
}
}
cfw_msg_free(msg);
}
int press_simulation(unsigned int service_id, unsigned int input_pin,
unsigned int output_pin)
{
cfw_service_conn_t *gpio_service_conn = NULL;
cfw_client_t *gpio_client = cfw_client_init(
get_test_queue(), pwrbtn_tst_handle_msg, NULL);
if (!cfw_service_registered(service_id)) {
cu_print("TST_PWRBTN: ss gpio service not registered\n");
return DRV_RC_FAIL;
}
cfw_open_service_conn(gpio_client, service_id, &gpio_service_conn);
SRV_WAIT((!gpio_service_conn), 2000);
CU_ASSERT("TST_PWRBTN: can not open ss gpio service",
(gpio_service_conn));
if (gpio_service_conn == NULL) {
return DRV_RC_FAIL;
}
/* The configuration put the pin to 0 => the pin have to be set to 1
* before first press simulation */
TEST_PWRBTN(configure, "TST_PWRBTN: gpio configuration failed",
gpio_service_conn, output_pin, 1,
"SS pin 2 output");
SRV_WAIT((!tst_pwrbtn_configure), 2000);
TEST_PWRBTN(set_state, "TST_PWRBTN: set 1 failed (re)",
gpio_service_conn, output_pin, 1,
"set_output 1");
/* wait state response */
SRV_WAIT((!tst_pwrbtn_set_state), 2000);
/* wait 3s */
local_task_sleep_ms(3000);
tst_step = VERY_SH_PRESS;
cu_print("Start pattern with press_duration = 700ms\n");
TEST_PWRBTN(set_state, "TST_PWRBTN: set 0 failed (re)",
gpio_service_conn, output_pin, 0,
"set_output 0");
local_task_sleep_ms(700);
TEST_PWRBTN(set_state, "TST_PWRBTN: set 1 failed (re)",
gpio_service_conn, output_pin, 1,
"set_output 1");
/* wait pattern detection */
SRV_WAIT((!tst_very_short), 2000);
/* wait 3s */
local_task_sleep_ms(3000);
cu_print("Start pattern with press_duration = 2500ms\n");
tst_step = SH_PRESS;
TEST_PWRBTN(set_state, "TST_PWRBTN: set 0 failed (re)",
gpio_service_conn, output_pin, 0,
"set_output 0");
local_task_sleep_ms(2500);
TEST_PWRBTN(set_state, "TST_PWRBTN: set 1 failed (re)",
gpio_service_conn, output_pin, 1,
"set_output 1");
/* wait pattern detection */
SRV_WAIT((!tst_short), 2000);
/* wait 3s */
local_task_sleep_ms(3000);
cu_print("Start pattern with press_duration = 4000ms\n");
tst_step = SINGLE_PRESS;
TEST_PWRBTN(set_state, "TST_PWRBTN: set 0 failed (re)",
gpio_service_conn, output_pin, 0,
"set_output 0");
local_task_sleep_ms(4000);
TEST_PWRBTN(set_state, "TST_PWRBTN: set 1 failed (re)",
gpio_service_conn, output_pin, 1,
"set_output 1");
/* wait pattern detection */
SRV_WAIT((!tst_single), 2000);
/* wait 3s */
local_task_sleep_ms(3000);
cu_print("Start pattern with press_duration = 7000ms\n");
tst_step = L_PRESS;
TEST_PWRBTN(set_state, "TST_PWRBTN: set 0 failed (re)",
gpio_service_conn, output_pin, 0,
"set_output 0");
local_task_sleep_ms(7000);
TEST_PWRBTN(set_state, "TST_PWRBTN: set 1 failed (re)",
gpio_service_conn, output_pin, 1,
"set_output 1");
/* wait pattern detection */
SRV_WAIT((!tst_long), 2000);
/* wait 3s */
local_task_sleep_ms(3000);
cu_print("Start pattern with press_duration = 12000ms\n");
tst_step = VERY_L_PRESS;
TEST_PWRBTN(set_state, "TST_PWRBTN: set 0 failed (re)",
gpio_service_conn, output_pin, 0,
"set_output 0");
local_task_sleep_ms(12000);
TEST_PWRBTN(set_state, "TST_PWRBTN: set 1 failed (re)",
gpio_service_conn, output_pin, 1,
"set_output 1");
/* wait 3s */
local_task_sleep_ms(3000);
/* Start failed double press pattern : very_short_press + 550 ms delay max + short_press */
cu_print("Start double pattern press failed...\n");
tst_step = DBLE_PRESS_FAIL_1;
TEST_PWRBTN(set_state, "TST_PWRBTN: set 0 failed (re)",
gpio_service_conn, output_pin, 0,
"set_output 0");
local_task_sleep_ms(700);
TEST_PWRBTN(set_state, "TST_PWRBTN: set 1 failed (re)",
gpio_service_conn, output_pin, 1,
"set_output 1");
/* wait pattern detection */
SRV_WAIT((!tst_double_fail_1), 2000);
/* wait between the very short press */
local_task_sleep_ms(550);
tst_step = DBLE_PRESS_FAIL_2;
TEST_PWRBTN(set_state, "TST_PWRBTN: set 0 failed (re)",
gpio_service_conn, output_pin, 0,
"set_output 0");
local_task_sleep_ms(2700);
TEST_PWRBTN(set_state, "TST_PWRBTN: set 1 failed (re)",
gpio_service_conn, output_pin, 1,
"set_output 1");
/* wait pattern detection */
SRV_WAIT((!tst_double_fail_2), 2000);
/* wait 3s */
local_task_sleep_ms(3000);
cu_print("Start too short pattern with duration = 300ms\n");
tst_step = TOO_SHORT_PRESS;
TEST_PWRBTN(set_state, "TST_PWRBTN: set 0 failed (re)",
gpio_service_conn, output_pin, 0,
"set_output 0");
local_task_sleep_ms(300);
TEST_PWRBTN(set_state, "TST_PWRBTN: set 1 failed (re)",
gpio_service_conn, output_pin, 1,
"set_output 1");
/* wait pattern detection */
SRV_WAIT((!tst_double_fail_2), 2000);
/* wait 3s */
local_task_sleep_ms(3000);
/* Start double press pattern : very_short_press + 350 ms delay max + very_short_press */
cu_print("Start double pattern press...\n");
tst_step = DBLE_PRESS;
TEST_PWRBTN(set_state, "TST_PWRBTN: set 0 failed (re)",
gpio_service_conn, output_pin, 0,
"set_output 0");
local_task_sleep_ms(700);
TEST_PWRBTN(set_state, "TST_PWRBTN: set 1 failed (re)",
gpio_service_conn, output_pin, 1,
"set_output 1");
/* wait between the very short press */
local_task_sleep_ms(350);
TEST_PWRBTN(set_state, "TST_PWRBTN: set 0 failed (re)",
gpio_service_conn, output_pin, 0,
"set_output 0");
local_task_sleep_ms(900);
TEST_PWRBTN(set_state, "TST_PWRBTN: set 1 failed (re)",
gpio_service_conn, output_pin, 1,
"set_output 1");
/* wait pattern detection */
SRV_WAIT((!tst_double), 2000);
/* wait 2s */
local_task_sleep_ms(2000);
cfw_close_service_conn(gpio_service_conn, NULL);
return DRV_RC_OK;
}