MainWindow::MainWindow(QWidget *parent) :
QMainWindow(parent),ui(new Ui::MainWindow),options(new channelOptions(this)),modOptions(new moduleDialog(this)),serialPortOpt(new serialPortOptions(this)),thePlaylist(new playlist(this))//thePlayer(new QMediaPlayer),
{
thePlayer = NULL;
ui->setupUi(this);
playbackRate=1;
serialPortName="COM3";
//serialPortName="/dev/ttyUSB0";
//thePort.setPortName("/dev/ttyACM0");
thePort.setPortName(serialPortName);
thePort.setBaudRate(QSerialPort::Baud9600);
serialOutputOn=0;
connect(ui->label_2,SIGNAL(playScroll(int)),ui->horizontalScrollBar,SLOT(setValue(int)));
connect(ui->label_2,SIGNAL(trackSelected(uint,QColor)),this,SLOT(channelSelected(uint,QColor)));
connect(ui->label_2,SIGNAL(updatePicture(binaryTrack)),ui->label,SLOT(whatToLightUp(binaryTrack)));
connect(ui->label_2,SIGNAL(updatePicture(binaryTrack)),this,SLOT(writeToSerialPort(binaryTrack)));
connect(ui->actionExit,SIGNAL(triggered()),this,SLOT(close()));
connect(options,SIGNAL(removeChannel(int)),this,SLOT(removeChannel(int)));
connect(options,SIGNAL(theColorChanged(uint,QColor)),this,SLOT(channelColorHasChanged(uint,QColor)));
connect(options,SIGNAL(changeEditMode(bool)),ui->label,SLOT(changeEditMode(bool)));
connect(options,SIGNAL(channelEnableButtonPushed(int,bool)),this,SLOT(channelEnabledButtonPushed(int,bool)));
connect(serialPortOpt,SIGNAL(setNewSerialPort(QString)),this,SLOT(serialPortNameChanged(QString)));
connect(thePlaylist,SIGNAL(changeSong(QString)),this,SLOT(playlistChangeSong(QString)));
tempTrackCount=0;
}
void CdWidget::previous()
{
if ( !channelsLb->count() )
return;
if ( (lastChannel-1)<1 )
return;
lastChannel--;
channelSelected( channelsLb->text( lastChannel-1 ) );
}
void CdWidget::next()
{
if ( !channelsLb->count() )
return;
if ( (lastChannel+1)>(int)channelsLb->count() )
return;
lastChannel++;
channelSelected( channelsLb->text( lastChannel-1 ) );
}
void CdWidget::playLastChannel()
{
if ( !channelsLb->count() )
return;
if ( !lastChannel ) {
lastChannel++;
}
else if ( lastChannel>(int)channelsLb->count() ) {
lastChannel = 1;
}
channelSelected( channelsLb->text( lastChannel-1 ) );
}
void scanControl(vmacApInfo_t *vmacSta_p)
{
#ifdef MRVL_DFS
if((!channelSelected(vmacSta_p,*(vmacSta_p->Mib802dot11->mib_ApMode) >=AP_MODE_A_ONLY))
&& !vmacSta_p->dfsCacExp)
#else
if(!channelSelected(vmacSta_p,*(vmacSta_p->Mib802dot11->mib_ApMode) >=AP_MODE_A_ONLY))
#endif
{
if(SetupScan(vmacSta_p))
return;
}
else
{
PrepareNextScan(vmacSta_p);
}
#ifdef MRVL_DFS
vmacSta_p->dfsCacExp = 0;
#endif
extStaDb_ProcessKeepAliveTimerInit(vmacSta_p);
MonitorTimerInit(vmacSta_p);
}
IRCAddContactPage::IRCAddContactPage( QWidget *parent, IRCAccount *a )
: AddContactPage(parent), Ui::ircAddUI(), d(new Private)
{
setupUi(this);
// d->search = new ChannelList( hbox, a->client() );
// QVBoxLayout *layout = new QVBoxLayout( hbox );
// hbox->setLayout(layout);
// layout->addWidget(d->search);
d->account = a;
connect( d->search, SIGNAL(channelSelected(QString)),
this, SLOT(slotChannelSelected(QString)) );
connect( d->search, SIGNAL(channelDoubleClicked(QString)),
this, SLOT(slotChannelDoubleClicked(QString)) );
}
void StopAutoChannel(vmacApInfo_t *vmacSta_p)
{
UINT8 cur_channel;
UINT8 *mib_autochannel_p = vmacSta_p->ShadowMib802dot11->mib_autochannel;
vmacSta_p->busyScanning = 0;
if(*mib_autochannel_p)
{
vmacSta_p->autochannelstarted = 1;
cur_channel = channelSelected(vmacSta_p,*(vmacSta_p->Mib802dot11->mib_ApMode) >=AP_MODE_A_ONLY);
wlUpdateAutoChan(vmacSta_p,cur_channel,0);
DisableBlockTrafficMode(vmacSta_p);
}
Disable_ScanTimerProcess(vmacSta_p);
return;
}
void CdWidget::playNumChannel( int num )
{
if ( num>0 && num<=(int)channelsLb->count() )
channelSelected( channelsLb->text( num-1 ) );
}
void ChannelList::slotItemSelected( QListViewItem *i )
{
emit channelSelected( i->text(0) );
}
/******************************************************************************
*
* Name: SendStartCmd
*
* Description:This function is called to send the Start command to MLME. Called
* after init, and also when ever the Config param belonging to the Start command
*
* Conditions For Use:
*
* Arguments:
* None.
*
* Return Value:
* None.
*
* Notes:
* None.
*
* PDL:
* END PDL
*
*****************************************************************************/
UINT32 SendStartCmd(vmacApInfo_t *vmacSta_p)
{
MIB_802DOT11 *mib=vmacSta_p->Mib802dot11;
MIB_STA_CFG *mib_StaCfg_p=vmacSta_p->Mib802dot11->StationConfig;
MIB_OP_DATA *mib_OpData_p=vmacSta_p->Mib802dot11->OperationTable;
MIB_PHY_DSSS_TABLE *PhyDSSSTable_p=vmacSta_p->Mib802dot11->PhyDSSSTable;
MIB_PRIVACY_TABLE *mib_PrivacyTable_p=vmacSta_p->Mib802dot11->Privacy;
#ifdef AP_URPTR
extern UINT8 mib_urMode;
#endif
#ifdef AP_MAC_LINUX
macmgmtQ_SmeCmd_t SmeCmd;
#endif
macmgmtQ_SmeCmd_t *SmeCmd_p;
UINT32 i, j, k;
#ifdef BRS_SUPPORT
UINT32 rateMask;
UINT32 basicRateMask;
#endif
/* code for sending Start Cmd */
SmeCmd_p = &SmeCmd;
memset(SmeCmd_p,
0,
sizeof(macmgmtQ_SmeCmd_t));
SmeCmd_p->CmdType = SME_CMD_START;
CopySsId(SmeCmd_p->Body.StartCmd.SsId, mib_StaCfg_p->DesiredSsId);
{
SmeCmd_p->Body.StartCmd.BssType = mib_StaCfg_p->DesiredBssType;
SmeCmd_p->Body.StartCmd.BcnPeriod = *(mib->mib_BcnPeriod);
SmeCmd_p->Body.StartCmd.DtimPeriod = mib_StaCfg_p->DtimPeriod;
/* Number of beacon intervals between DTIMs */
SmeCmd_p->Body.StartCmd.SsParamSet.CfParamSet.ElementId = CF_PARAM_SET;
SmeCmd_p->Body.StartCmd.SsParamSet.CfParamSet.CfpCnt = 0; /* HW MAC fills later */
SmeCmd_p->Body.StartCmd.SsParamSet.CfParamSet.CfpPeriod = mib_StaCfg_p->CfPeriod;
SmeCmd_p->Body.StartCmd.SsParamSet.CfParamSet.CfpMaxDuration = mib_StaCfg_p->CfpMax;
SmeCmd_p->Body.StartCmd.SsParamSet.CfParamSet.CfpDurationRemaining = 0; /* HW MAC */
SmeCmd_p->Body.StartCmd.SsParamSet.CfParamSet.Len = sizeof(IEEEtypes_CfParamSet_t) -
sizeof(IEEEtypes_ElementId_t) - sizeof(IEEEtypes_Len_t);
SmeCmd_p->Body.StartCmd.PhyParamSet.DsParamSet.ElementId = DS_PARAM_SET;
SmeCmd_p->Body.StartCmd.PhyParamSet.DsParamSet.Len = 1;
#ifdef AUTOCHANNEL
if(PhyDSSSTable_p->CurrChan ==0 ||PhyDSSSTable_p->CurrChan2==0) // || g_urAutoCfg)
{
UINT8 chsel_a, chsel_g;
chsel_a = channelSelected(vmacSta_p,1);
chsel_g = channelSelected(vmacSta_p,0);
if(PhyDSSSTable_p->CurrChan ==0)
{
if(*(mib->mib_ApMode)>=AP_MODE_A_ONLY)
{
SmeCmd_p->Body.StartCmd.PhyParamSet.DsParamSet.CurrentChan = chsel_a;
}
else
{
SmeCmd_p->Body.StartCmd.PhyParamSet.DsParamSet.CurrentChan = chsel_g;
}
}
else
{
SmeCmd_p->Body.StartCmd.PhyParamSet.DsParamSet.CurrentChan = PhyDSSSTable_p->CurrChan;
}
RfSwitchChanA = PhyDSSSTable_p->CurrChan?PhyDSSSTable_p->CurrChan:chsel_a;
RfSwitchChanG = PhyDSSSTable_p->CurrChan2?PhyDSSSTable_p->CurrChan2:chsel_g;
}
else
#endif
{
SmeCmd_p->Body.StartCmd.PhyParamSet.DsParamSet.CurrentChan = PhyDSSSTable_p->CurrChan;
RfSwitchChanA=PhyDSSSTable_p->CurrChan;
RfSwitchChanG= PhyDSSSTable_p->CurrChan2;
}
SmeCmd_p->Body.StartCmd.ProbeDelay = 10;
SmeCmd_p->Body.StartCmd.CapInfo.Ess = 1;
SmeCmd_p->Body.StartCmd.CapInfo.Ibss = 0;
SmeCmd_p->Body.StartCmd.CapInfo.CfPollable = mib_StaCfg_p->CfPollable ? 1 : 0;
SmeCmd_p->Body.StartCmd.CapInfo.CfPollRqst = 0;
if (*(mib->mib_ApMode) != AP_MODE_B_ONLY && *(mib->mib_ApMode) !=AP_MODE_AandG)
SmeCmd_p->Body.StartCmd.CapInfo.ShortSlotTime = *(mib->mib_shortSlotTime);
else
SmeCmd_p->Body.StartCmd.CapInfo.ShortSlotTime = 0;
// if(mib_StaCfg_p->PrivOption == TRUE && mib_PrivacyTable_p->PrivInvoked == TRUE)
if (mib_PrivacyTable_p->PrivInvoked)
{
SmeCmd_p->Body.StartCmd.CapInfo.Privacy = 1;
}
else
{
if (mib_PrivacyTable_p->RSNEnabled)
SmeCmd_p->Body.StartCmd.CapInfo.Privacy = 1;
else
SmeCmd_p->Body.StartCmd.CapInfo.Privacy = 0;
}
if (mib_StaCfg_p->mib_preAmble == PREAMBLE_LONG || mib_StaCfg_p->mib_preAmble == PREAMBLE_AUTO_SELECT || *(mib->mib_ApMode)==AP_MODE_A_ONLY)
{
SmeCmd_p->Body.StartCmd.CapInfo.ShortPreamble = 0;
}
else
{
SmeCmd_p->Body.StartCmd.CapInfo.ShortPreamble = 1;
}
SmeCmd_p->Body.StartCmd.CapInfo.Pbcc = 0;
SmeCmd_p->Body.StartCmd.CapInfo.ChanAgility = 0;
#ifdef IEEE80211H
SmeCmd_p->Body.StartCmd.CapInfo.SpectrumMgmt = mib_StaCfg_p->SpectrumManagementRequired ? 1:0;
#endif /* IEEE80211H */
/* Form the Rate from the mib, separate the Basic and Op rate set */
#ifdef BRS_SUPPORT
i = j = k = 0;
rateMask = *(mib->BssBasicRateMask) | *(mib->NotBssBasicRateMask);
basicRateMask = *(mib->BssBasicRateMask);
while ( i < IEEEtypes_MAX_DATA_RATES_G && mib_StaCfg_p->OpRateSet[i] != '\0') {
if (rateMask & 0x01) {
if ( basicRateMask & 0x01) {
SmeCmd_p->Body.StartCmd.BssBasicRateSet[j] = (mib_StaCfg_p->OpRateSet[i] & 0x7F);
SmeCmd_p->Body.StartCmd.OpRateSet[k] = (mib_StaCfg_p->OpRateSet[i] & 0x7F);
j++;k++;
}
else
{
SmeCmd_p->Body.StartCmd.OpRateSet[k] = (mib_StaCfg_p->OpRateSet[i] & 0x7F);
k++;
}
}
i++;
rateMask >>= 1;
basicRateMask >>= 1;
}
#else
i = j = k = 0;
while ( i < IEEEtypes_MAX_DATA_RATES_G && mib_StaCfg_p->OpRateSet[i] != '\0') {
if ( mib_StaCfg_p->OpRateSet[i] & 0x80) {
SmeCmd_p->Body.StartCmd.BssBasicRateSet[j] = (mib_StaCfg_p->OpRateSet[i] & 0x7f);
SmeCmd_p->Body.StartCmd.OpRateSet[k] = mib_StaCfg_p->OpRateSet[i] & 0x7f;
i++;j++;k++;
}
else
{
SmeCmd_p->Body.StartCmd.OpRateSet[k] = mib_StaCfg_p->OpRateSet[i] & 0x7f;
i++;k++;
}
}
#endif
if (i < IEEEtypes_MAX_DATA_RATES_G )
{
SmeCmd_p->Body.StartCmd.BssBasicRateSet[j] = '\0';
SmeCmd_p->Body.StartCmd.OpRateSet[k] = '\0';
}
i = j = k = 0;
if(*(mib->mib_ApMode)==AP_MODE_AandG)
{
while ( i < IEEEtypes_MAX_DATA_RATES_G && mib_StaCfg_p->OpRateSet2[i] != '\0')
{
if ( mib_StaCfg_p->OpRateSet2[i] & 0x80)
{
SmeCmd_p->Body.StartCmd.BssBasicRateSet2[j] = (mib_StaCfg_p->OpRateSet2[i] & 0x7f);
SmeCmd_p->Body.StartCmd.OpRateSet2[k] = mib_StaCfg_p->OpRateSet2[i] & 0x7f;
i++;j++;k++;
}
else
{
SmeCmd_p->Body.StartCmd.OpRateSet2[k] = mib_StaCfg_p->OpRateSet2[i] & 0x7f;
i++;k++;
}
}
if (i < IEEEtypes_MAX_DATA_RATES_G )
{
SmeCmd_p->Body.StartCmd.BssBasicRateSet2[j] = '\0';
SmeCmd_p->Body.StartCmd.OpRateSet2[k] = '\0';
}
}
/* printf("SmeTask: Sending Start Cmd to MacMgmtAp Task\n"); */
memcpy(&vmacSta_p->macStaAddr, mib_OpData_p->StaMacAddr, sizeof(IEEEtypes_MacAddr_t));
if(*(mib->mib_ApMode)==AP_MODE_AandG)
memcpy(&vmacSta_p->macStaAddr2, &vmacSta_p->macBssId2, sizeof(IEEEtypes_MacAddr_t));
memcpy(&vmacSta_p->macBssId, mib_OpData_p->StaMacAddr, sizeof(IEEEtypes_MacAddr_t));
//printk(KERN_CRIT "Event Initialize send SME start command\n");
#ifdef IEEE80211_DH
evtSmeCmdMsg(vmacSta_p,(UINT8 *)SmeCmd_p);
#else
//evtSmeCmdMsg(wlpptr->vmacSta_p,SmeCmd_p);
#endif /*IEEE80211_DH*/
macMgmtMlme_StartCmd(vmacSta_p,&SmeCmd_p->Body.StartCmd);
}
return(OS_SUCCESS);
}
