static PyObject *
channel_setstate(PyObject *self, PyObject *args)
{
PyChannelObject *ch = (PyChannelObject *) self;
PyTaskletObject *t;
PyObject *lis;
int flags, balance;
int dir;
Py_ssize_t i, n;
if (!PyArg_ParseTuple(args, "iiO!:channel",
&balance,
&flags,
&PyList_Type, &lis))
return NULL;
channel_clear((PyObject *) ch);
n = PyList_GET_SIZE(lis);
*(int *)&ch->flags = flags;
dir = balance > 0 ? 1 : -1;
for (i = 0; i < n; i++) {
t = (PyTaskletObject *) PyList_GET_ITEM(lis, i);
if (PyTasklet_Check(t) && !t->flags.blocked) {
Py_INCREF(t);
slp_channel_insert(ch, t, dir);
}
}
Py_INCREF(self);
return self;
}
/*---------------------------------------------------------------------------*/
static int
transmit(unsigned short transmit_len)
{
uint8_t counter;
int ret = RADIO_TX_ERR;
rtimer_clock_t t0;
transmit_len; /* hush the warning */
if(!(rf_flags & RX_ACTIVE)) {
t0 = RTIMER_NOW();
on();
rf_flags |= WAS_OFF;
while (RTIMER_CLOCK_LT(RTIMER_NOW(), t0 + ONOFF_TIME));
}
if(channel_clear() == CC2530_RF_CCA_BUSY) {
RIMESTATS_ADD(contentiondrop);
return RADIO_TX_COLLISION;
}
/*
* prepare() double checked that TX_ACTIVE is low. If SFD is high we are
* receiving. Abort transmission and bail out with RADIO_TX_COLLISION
*/
if(FSMSTAT1 & FSMSTAT1_SFD) {
RIMESTATS_ADD(contentiondrop);
return RADIO_TX_COLLISION;
}
/* Start the transmission */
RF_TX_LED_ON();
ENERGEST_OFF(ENERGEST_TYPE_LISTEN);
ENERGEST_ON(ENERGEST_TYPE_TRANSMIT);
CC2530_CSP_ISTXON();
counter = 0;
while(!(FSMSTAT1 & FSMSTAT1_TX_ACTIVE) && (counter++ < 3)) {
clock_delay_usec(6);
}
if(!(FSMSTAT1 & FSMSTAT1_TX_ACTIVE)) {
PUTSTRING("RF: TX never active.\n");
CC2530_CSP_ISFLUSHTX();
ret = RADIO_TX_ERR;
} else {
/* Wait for the transmission to finish */
while(FSMSTAT1 & FSMSTAT1_TX_ACTIVE);
ret = RADIO_TX_OK;
}
ENERGEST_OFF(ENERGEST_TYPE_TRANSMIT);
ENERGEST_ON(ENERGEST_TYPE_LISTEN);
if(rf_flags & WAS_OFF){
off();
}
RIMESTATS_ADD(lltx);
RF_TX_LED_OFF();
/* OK, sent. We are now ready to send more */
return ret;
}
/*---------------------------------------------------------------------------*/
static int
transmit(unsigned short transmit_len)
{
uint8_t counter;
int ret = RADIO_TX_ERR;
rtimer_clock_t t0;
uint8_t was_off = 0;
PRINTF("RF: Transmit\n");
if(!(rf_flags & RX_ACTIVE)) {
t0 = RTIMER_NOW();
on();
was_off = 1;
while(RTIMER_CLOCK_LT(RTIMER_NOW(), t0 + ONOFF_TIME));
}
if(channel_clear() == CC2538_RF_CCA_BUSY) {
RIMESTATS_ADD(contentiondrop);
return RADIO_TX_COLLISION;
}
/*
* prepare() double checked that TX_ACTIVE is low. If SFD is high we are
* receiving. Abort transmission and bail out with RADIO_TX_COLLISION
*/
if(REG(RFCORE_XREG_FSMSTAT1) & RFCORE_XREG_FSMSTAT1_SFD) {
RIMESTATS_ADD(contentiondrop);
return RADIO_TX_COLLISION;
}
/* Start the transmission */
ENERGEST_OFF(ENERGEST_TYPE_LISTEN);
ENERGEST_ON(ENERGEST_TYPE_TRANSMIT);
CC2538_RF_CSP_ISTXON();
counter = 0;
while(!((REG(RFCORE_XREG_FSMSTAT1) & RFCORE_XREG_FSMSTAT1_TX_ACTIVE))
&& (counter++ < 3)) {
clock_delay_usec(6);
}
if(!(REG(RFCORE_XREG_FSMSTAT1) & RFCORE_XREG_FSMSTAT1_TX_ACTIVE)) {
PRINTF("RF: TX never active.\n");
CC2538_RF_CSP_ISFLUSHTX();
ret = RADIO_TX_ERR;
} else {
/* Wait for the transmission to finish */
while(REG(RFCORE_XREG_FSMSTAT1) & RFCORE_XREG_FSMSTAT1_TX_ACTIVE);
ret = RADIO_TX_OK;
}
ENERGEST_OFF(ENERGEST_TYPE_TRANSMIT);
ENERGEST_ON(ENERGEST_TYPE_LISTEN);
if(was_off) {
off();
}
RIMESTATS_ADD(lltx);
return ret;
}
