static void stubSendAcceleration()
{
open_radio();
// Set SimpliciTI mode
sRFsmpl.mode = SIMPLICITI_ACCELERATION;
// Set SimpliciTI timeout to save battery power
sRFsmpl.timeout2 = SIMPLICITI_TIMEOUT2;
if (simpliciti_link())
{
simpliciti_main_sync();
setFlag(simpliciti_flag, SIMPLICITI_TRIGGER_SEND_DATA);
simpliciti_main_tx_only();
}
// Set SimpliciTI state to OFF
sRFsmpl.mode = SIMPLICITI_OFF;
close_radio();
}
// *************************************************************************************************
// @fn start_simpliciti_sync
// @brief Start SimpliciTI (sync mode).
// @param none
// @return none
// *************************************************************************************************
void start_simpliciti_sync(void)
{
// Clear LINE1
clear_line(LINE1);
fptr_lcd_function_line1(LINE1, DISPLAY_LINE_CLEAR);
// Stop data logging and close session
stop_datalog();
// Turn on beeper icon to show activity
display_symbol(LCD_ICON_BEEPER1, SEG_ON_BLINK_ON);
display_symbol(LCD_ICON_BEEPER2, SEG_ON_BLINK_ON);
display_symbol(LCD_ICON_BEEPER3, SEG_ON_BLINK_ON);
// Prepare radio for RF communication
open_radio();
// Set SimpliciTI mode
sRFsmpl.mode = SIMPLICITI_SYNC;
// Set SimpliciTI timeout to save battery power
sRFsmpl.timeout = SIMPLICITI_TIMEOUT;
// Start SimpliciTI stack. Try to link to access point.
// Exit with timeout or by a DOWN button press.
if (simpliciti_link())
{
// Enter sync routine. This will send ready-to-receive packets at regular intervals to the
// access point.
// The access point always replies a command (NOP if no other command is set)
simpliciti_main_sync();
}
// Set SimpliciTI state to OFF
sRFsmpl.mode = SIMPLICITI_OFF;
// Powerdown radio
close_radio();
// Clear last button events
Timer0_A4_Delay(CONV_MS_TO_TICKS(BUTTONS_DEBOUNCE_TIME_OUT));
BUTTONS_IFG = 0x00;
button.all_flags = 0;
// Clear icons
display_symbol(LCD_ICON_BEEPER1, SEG_OFF_BLINK_OFF);
display_symbol(LCD_ICON_BEEPER2, SEG_OFF_BLINK_OFF);
display_symbol(LCD_ICON_BEEPER3, SEG_OFF_BLINK_OFF);
// Force full display update
display.flag.full_update = 1;
}
// *************************************************************************************************
// @fn start_simpliciti_tx_only
// @brief Start SimpliciTI (tx only).
// @param simpliciti_state_t SIMPLICITI_ACCELERATION, SIMPLICITI_BUTTONS
// @return none
// *************************************************************************************************
void start_simpliciti_tx_only(simpliciti_mode_t mode)
{
// Turn on beeper icon to show activity
display_symbol(LCD_ICON_BEEPER1, SEG_ON_BLINK_ON);
// Prepare radio for RF communication
open_radio();
// Set SimpliciTI mode
sRFsmpl.mode = mode;
// Set SimpliciTI timeout to save battery power
sRFsmpl.timeout = SIMPLICITI_TIMEOUT;
// Start SimpliciTI stack. Try to link to access point.
// Exit with timeout or by a button DOWN press.
if (simpliciti_link())
{
// Enter TX only routine. This will transfer button events and/or acceleration data to access point.
simpliciti_main_tx_only();
}
// Set SimpliciTI state to OFF
sRFsmpl.mode = SIMPLICITI_OFF;
// Stop acceleration sensor
as_stop();
// Powerdown radio
close_radio();
// Clear last button events
BUTTONS_IFG = 0x00;
button.all_flags = 0;
// Clear icons
display_symbol(LCD_ICON_BEEPER1, SEG_OFF_BLINK_OFF);
}
void gkrellm_radio_turn_onoff(void) {
if (!onoff_state) {
if (open_radio() == -1) {
gkrellm_message_window("GKrellM radio plugin",
_("Couldn't open /dev/radio"), NULL);
} else {
/* radio was opened */
onoff_state = 1; /* on */
start_mute_timer();
radio_setfreq(radio_getfreq());
set_text_freq(radio_getfreq());
set_onoff_button(onoff_state);
}
} else {
onoff_state = 0; /* off */
set_onoff_button(onoff_state);
close_radio();
}
}
// *************************************************************************************************
// @fn start_simpliciti_sync
// @brief Start SimpliciTI (sync mode).
// @param none
// @return none
// *************************************************************************************************
void start_simpliciti_sync(void)
{
display_symbol(LCD_ICON_BEEPER1, SEG_ON_BLINK_ON);
// Debounce button event
//Timer0_A4_Delay(CONV_MS_TO_TICKS(BUTTONS_DEBOUNCE_TIME_OUT));
// Prepare radio for RF communication
open_radio();
// Set SimpliciTI mode
sRFsmpl.mode = SIMPLICITI_SYNC;
// Set SimpliciTI timeout to save battery power
sRFsmpl.timeout = SIMPLICITI_TIMEOUT;
// Start SimpliciTI stack. Try to link to access point.
// Exit with timeout or by a button DOWN press.
if (simpliciti_link())
{
// Enter sync routine. This will send ready-to-receive packets at regular intervals to the access point.
// The access point replies with a command (NOP if no other command is set)
simpliciti_main_sync();
}
// Set SimpliciTI state to OFF
sRFsmpl.mode = SIMPLICITI_OFF;
// Powerdown radio
close_radio();
BUTTONS_IFG = 0x00;
button.all_flags = 0;
// Clear icons
display_symbol(LCD_ICON_BEEPER1, SEG_OFF_BLINK_OFF);
}
// *************************************************************************************************
// @fn stop_bluerobin
// @brief Stop communication and put peripherals in power-down mode.
// @param none
// @return none
// *************************************************************************************************
void stop_bluerobin(void)
{
// Reset connection status byte
sBlueRobin.state = BLUEROBIN_OFF;
// Stop channel
BRRX_Stop_v(HR_CHANNEL);
// Powerdown radio
close_radio();
// Force full display update to clear heart rate and speed data
sBlueRobin.heartrate = 0;
display.flag.full_update = 1;
// Clear heart and RF symbol
display_symbol(LCD_ICON_HEART, SEG_OFF_BLINK_OFF);
display_symbol(LCD_ICON_BEEPER1, SEG_OFF_BLINK_OFF);
display_symbol(LCD_ICON_BEEPER2, SEG_OFF_BLINK_OFF);
display_symbol(LCD_ICON_BEEPER3, SEG_OFF_BLINK_OFF);
}
void
sx_gate (u8 line)
{
u16 i;
if (button.flag.down)
{
display_symbol (LCD_ICON_BEEPER1, SEG_ON);
open_radio();
gate_init();
for(i=0;i<50;i++) {
GATE_Transmit(open, GATE_SETTING_PKTLEN);
Timer0_A4_Delay(CONV_MS_TO_TICKS(11));
}
close_radio();
display_symbol (LCD_ICON_BEEPER1, SEG_OFF);
}
else
{
}
}
// *************************************************************************************************
// @fn start_simpliciti_tx_only
// @brief Start SimpliciTI (tx only).
// @param simpliciti_state_t SIMPLICITI_ACCELERATION, SIMPLICITI_BUTTONS
// @return none
// *************************************************************************************************
void start_simpliciti_tx_only(simpliciti_mode_t mode)
{
// Display time in line 1
clear_line(LINE1);
fptr_lcd_function_line1(LINE1, DISPLAY_LINE_CLEAR);
display_time(LINE1, DISPLAY_LINE_UPDATE_FULL);
// Preset simpliciti_data with mode (key or mouse click) and clear other data bytes
if (mode == SIMPLICITI_ACCELERATION)
{
simpliciti_data[0] = SIMPLICITI_MOUSE_EVENTS;
}
else
{
simpliciti_data[0] = SIMPLICITI_KEY_EVENTS;
}
simpliciti_data[1] = 0;
simpliciti_data[2] = 0;
simpliciti_data[3] = 0;
// Turn on beeper icon to show activity
display_symbol(LCD_ICON_BEEPER1, SEG_ON_BLINK_ON);
display_symbol(LCD_ICON_BEEPER2, SEG_ON_BLINK_ON);
display_symbol(LCD_ICON_BEEPER3, SEG_ON_BLINK_ON);
// Debounce button event
Timer0_A4_Delay(CONV_MS_TO_TICKS(BUTTONS_DEBOUNCE_TIME_OUT));
// Prepare radio for RF communication
open_radio();
// Set SimpliciTI mode
sRFsmpl.mode = mode;
// Set SimpliciTI timeout to save battery power
sRFsmpl.timeout = SIMPLICITI_TIMEOUT;
// Start SimpliciTI stack. Try to link to access point.
// Exit with timeout or by a button DOWN press.
if (simpliciti_link())
{
if (mode == SIMPLICITI_ACCELERATION)
{
// Start acceleration sensor
as_start();
}
// Enter TX only routine. This will transfer button events and/or acceleration data to
// access point.
simpliciti_main_tx_only();
}
// Set SimpliciTI state to OFF
sRFsmpl.mode = SIMPLICITI_OFF;
// Stop acceleration sensor
as_stop();
// Powerdown radio
close_radio();
// Clear last button events
Timer0_A4_Delay(CONV_MS_TO_TICKS(BUTTONS_DEBOUNCE_TIME_OUT));
BUTTONS_IFG = 0x00;
button.all_flags = 0;
// Clear icons
display_symbol(LCD_ICON_BEEPER1, SEG_OFF_BLINK_OFF);
display_symbol(LCD_ICON_BEEPER2, SEG_OFF_BLINK_OFF);
display_symbol(LCD_ICON_BEEPER3, SEG_OFF_BLINK_OFF);
// Clean up line 1
clear_line(LINE1);
display_time(LINE1, DISPLAY_LINE_CLEAR);
// Force full display update
display.flag.full_update = 1;
}
static void exit_func(void) {
if (close_atexit) close_radio();
}