void JIT::compileOpCall(OpcodeID opcodeID, Instruction* instruction, unsigned i, unsigned)
{
int dst = instruction[1].u.operand;
int callee = instruction[2].u.operand;
int argCount = instruction[3].u.operand;
int registerOffset = instruction[4].u.operand;
// Handle eval
JmpSrc wasEval;
if (opcodeID == op_call_eval) {
emitGetVirtualRegister(callee, X86::ecx, i);
compileOpCallEvalSetupArgs(instruction);
emitCTICall(i, Interpreter::cti_op_call_eval);
__ cmpl_i32r(asInteger(JSImmediate::impossibleValue()), X86::eax);
wasEval = __ jne();
}
emitGetVirtualRegister(callee, X86::ecx, i);
// The arguments have been set up on the hot path for op_call_eval
if (opcodeID == op_call)
compileOpCallSetupArgs(instruction);
else if (opcodeID == op_construct)
compileOpConstructSetupArgs(instruction);
// Check for JSFunctions.
emitJumpSlowCaseIfNotJSCell(X86::ecx, i);
__ cmpl_i32m(reinterpret_cast<unsigned>(m_interpreter->m_jsFunctionVptr), X86::ecx);
m_slowCases.append(SlowCaseEntry(__ jne(), i));
// First, in the case of a construct, allocate the new object.
if (opcodeID == op_construct) {
emitCTICall(i, Interpreter::cti_op_construct_JSConstruct);
emitPutVirtualRegister(registerOffset - RegisterFile::CallFrameHeaderSize - argCount);
emitGetVirtualRegister(callee, X86::ecx, i);
}
// Speculatively roll the callframe, assuming argCount will match the arity.
__ movl_rm(X86::edi, (RegisterFile::CallerFrame + registerOffset) * static_cast<int>(sizeof(Register)), X86::edi);
__ addl_i32r(registerOffset * static_cast<int>(sizeof(Register)), X86::edi);
__ movl_i32r(argCount, X86::edx);
emitNakedCall(i, m_interpreter->m_ctiVirtualCall);
if (opcodeID == op_call_eval)
__ link(wasEval, __ label());
// Put the return value in dst. In the interpreter, op_ret does this.
emitPutVirtualRegister(dst);
#if ENABLE(CODEBLOCK_SAMPLING)
__ movl_i32m(reinterpret_cast<unsigned>(m_codeBlock), m_interpreter->sampler()->codeBlockSlot());
#endif
}
void JIT::compileOpCall(OpcodeID opcodeID, Instruction* instruction, unsigned)
{
int dst = instruction[1].u.operand;
int callee = instruction[2].u.operand;
int argCount = instruction[3].u.operand;
int registerOffset = instruction[4].u.operand;
// Handle eval
Jump wasEval;
if (opcodeID == op_call_eval) {
emitGetVirtualRegister(callee, X86::ecx);
compileOpCallEvalSetupArgs(instruction);
emitCTICall(Interpreter::cti_op_call_eval);
wasEval = jnePtr(X86::eax, ImmPtr(JSImmediate::impossibleValue()));
}
emitGetVirtualRegister(callee, X86::ecx);
// The arguments have been set up on the hot path for op_call_eval
if (opcodeID == op_call)
compileOpCallSetupArgs(instruction);
else if (opcodeID == op_construct)
compileOpConstructSetupArgs(instruction);
// Check for JSFunctions.
emitJumpSlowCaseIfNotJSCell(X86::ecx);
addSlowCase(jnePtr(Address(X86::ecx), ImmPtr(m_interpreter->m_jsFunctionVptr)));
// First, in the case of a construct, allocate the new object.
if (opcodeID == op_construct) {
emitCTICall(Interpreter::cti_op_construct_JSConstruct);
emitPutVirtualRegister(registerOffset - RegisterFile::CallFrameHeaderSize - argCount);
emitGetVirtualRegister(callee, X86::ecx);
}
// Speculatively roll the callframe, assuming argCount will match the arity.
storePtr(callFrameRegister, Address(callFrameRegister, (RegisterFile::CallerFrame + registerOffset) * static_cast<int>(sizeof(Register))));
addPtr(Imm32(registerOffset * static_cast<int>(sizeof(Register))), callFrameRegister);
move(Imm32(argCount), X86::edx);
emitNakedCall(m_interpreter->m_ctiVirtualCall);
if (opcodeID == op_call_eval)
wasEval.link(this);
// Put the return value in dst. In the interpreter, op_ret does this.
emitPutVirtualRegister(dst);
#if ENABLE(CODEBLOCK_SAMPLING)
storePtr(ImmPtr(m_codeBlock), m_interpreter->sampler()->codeBlockSlot());
#endif
}
void JIT::compileOpCall(OpcodeID opcodeID, Instruction* instruction, unsigned callLinkInfoIndex)
{
int dst = instruction[1].u.operand;
int callee = instruction[2].u.operand;
int argCount = instruction[3].u.operand;
int registerOffset = instruction[4].u.operand;
// Handle eval
Jump wasEval;
if (opcodeID == op_call_eval) {
emitGetVirtualRegister(callee, X86::ecx);
compileOpCallEvalSetupArgs(instruction);
emitCTICall(Interpreter::cti_op_call_eval);
wasEval = jnePtr(X86::eax, ImmPtr(JSValuePtr::encode(JSImmediate::impossibleValue())));
}
// This plants a check for a cached JSFunction value, so we can plant a fast link to the callee.
// This deliberately leaves the callee in ecx, used when setting up the stack frame below
emitGetVirtualRegister(callee, X86::ecx);
DataLabelPtr addressOfLinkedFunctionCheck;
Jump jumpToSlow = jnePtrWithPatch(X86::ecx, addressOfLinkedFunctionCheck, ImmPtr(JSValuePtr::encode(JSImmediate::impossibleValue())));
addSlowCase(jumpToSlow);
ASSERT(differenceBetween(addressOfLinkedFunctionCheck, jumpToSlow) == patchOffsetOpCallCompareToJump);
m_callStructureStubCompilationInfo[callLinkInfoIndex].hotPathBegin = addressOfLinkedFunctionCheck;
// The following is the fast case, only used whan a callee can be linked.
// In the case of OpConstruct, call out to a cti_ function to create the new object.
if (opcodeID == op_construct) {
int proto = instruction[5].u.operand;
int thisRegister = instruction[6].u.operand;
emitPutJITStubArg(X86::ecx, 1);
emitPutJITStubArgFromVirtualRegister(proto, 4, X86::eax);
emitCTICall(Interpreter::cti_op_construct_JSConstruct);
emitPutVirtualRegister(thisRegister);
emitGetVirtualRegister(callee, X86::ecx);
}
// Fast version of stack frame initialization, directly relative to edi.
// Note that this omits to set up RegisterFile::CodeBlock, which is set in the callee
storePtr(ImmPtr(JSValuePtr::encode(noValue())), Address(callFrameRegister, (registerOffset + RegisterFile::OptionalCalleeArguments) * static_cast<int>(sizeof(Register))));
storePtr(X86::ecx, Address(callFrameRegister, (registerOffset + RegisterFile::Callee) * static_cast<int>(sizeof(Register))));
loadPtr(Address(X86::ecx, FIELD_OFFSET(JSFunction, m_scopeChain) + FIELD_OFFSET(ScopeChain, m_node)), X86::edx); // newScopeChain
store32(Imm32(argCount), Address(callFrameRegister, (registerOffset + RegisterFile::ArgumentCount) * static_cast<int>(sizeof(Register))));
storePtr(callFrameRegister, Address(callFrameRegister, (registerOffset + RegisterFile::CallerFrame) * static_cast<int>(sizeof(Register))));
storePtr(X86::edx, Address(callFrameRegister, (registerOffset + RegisterFile::ScopeChain) * static_cast<int>(sizeof(Register))));
addPtr(Imm32(registerOffset * sizeof(Register)), callFrameRegister);
// Call to the callee
m_callStructureStubCompilationInfo[callLinkInfoIndex].hotPathOther = emitNakedCall(reinterpret_cast<void*>(unreachable));
if (opcodeID == op_call_eval)
wasEval.link(this);
// Put the return value in dst. In the interpreter, op_ret does this.
emitPutVirtualRegister(dst);
#if ENABLE(CODEBLOCK_SAMPLING)
storePtr(ImmPtr(m_codeBlock), m_interpreter->sampler()->codeBlockSlot());
#endif
}
void JIT::compileOpCall(OpcodeID opcodeID, Instruction* instruction, unsigned callLinkInfoIndex)
{
int dst = instruction[1].u.operand;
int callee = instruction[2].u.operand;
int argCount = instruction[3].u.operand;
int registerOffset = instruction[4].u.operand;
// Handle eval
JmpSrc wasEval;
if (opcodeID == op_call_eval) {
emitGetVirtualRegister(callee, X86::ecx);
compileOpCallEvalSetupArgs(instruction);
emitCTICall(Interpreter::cti_op_call_eval);
__ cmpl_ir(asInteger(JSImmediate::impossibleValue()), X86::eax);
wasEval = __ jne();
}
// This plants a check for a cached JSFunction value, so we can plant a fast link to the callee.
// This deliberately leaves the callee in ecx, used when setting up the stack frame below
emitGetVirtualRegister(callee, X86::ecx);
__ cmpl_ir_force32(asInteger(JSImmediate::impossibleValue()), X86::ecx);
JmpDst addressOfLinkedFunctionCheck = __ label();
addSlowCase(__ jne());
ASSERT(X86Assembler::getDifferenceBetweenLabels(addressOfLinkedFunctionCheck, __ label()) == repatchOffsetOpCallCall);
m_callStructureStubCompilationInfo[callLinkInfoIndex].hotPathBegin = addressOfLinkedFunctionCheck;
// The following is the fast case, only used whan a callee can be linked.
// In the case of OpConstruct, call out to a cti_ function to create the new object.
if (opcodeID == op_construct) {
int proto = instruction[5].u.operand;
int thisRegister = instruction[6].u.operand;
emitPutJITStubArg(X86::ecx, 1);
emitPutJITStubArgFromVirtualRegister(proto, 4, X86::eax);
emitCTICall(Interpreter::cti_op_construct_JSConstruct);
emitPutVirtualRegister(thisRegister);
emitGetVirtualRegister(callee, X86::ecx);
}
// Fast version of stack frame initialization, directly relative to edi.
// Note that this omits to set up RegisterFile::CodeBlock, which is set in the callee
__ movl_i32m(asInteger(noValue()), (registerOffset + RegisterFile::OptionalCalleeArguments) * static_cast<int>(sizeof(Register)), X86::edi);
__ movl_rm(X86::ecx, (registerOffset + RegisterFile::Callee) * static_cast<int>(sizeof(Register)), X86::edi);
__ movl_mr(FIELD_OFFSET(JSFunction, m_scopeChain) + FIELD_OFFSET(ScopeChain, m_node), X86::ecx, X86::edx); // newScopeChain
__ movl_i32m(argCount, (registerOffset + RegisterFile::ArgumentCount) * static_cast<int>(sizeof(Register)), X86::edi);
__ movl_rm(X86::edi, (registerOffset + RegisterFile::CallerFrame) * static_cast<int>(sizeof(Register)), X86::edi);
__ movl_rm(X86::edx, (registerOffset + RegisterFile::ScopeChain) * static_cast<int>(sizeof(Register)), X86::edi);
__ addl_ir(registerOffset * sizeof(Register), X86::edi);
// Call to the callee
m_callStructureStubCompilationInfo[callLinkInfoIndex].hotPathOther = emitNakedCall(reinterpret_cast<void*>(unreachable));
if (opcodeID == op_call_eval)
__ link(wasEval, __ label());
// Put the return value in dst. In the interpreter, op_ret does this.
emitPutVirtualRegister(dst);
#if ENABLE(CODEBLOCK_SAMPLING)
__ movl_i32m(reinterpret_cast<unsigned>(m_codeBlock), m_interpreter->sampler()->codeBlockSlot());
#endif
}
