int
com_ioc_probe(struct device *parent, void *match, void *aux)
{
struct cfdata *cf = match;
struct ioc_attach_args *iaa = aux;
bus_space_tag_t iot = iaa->iaa_memt;
bus_space_handle_t ioh;
int rv = 0, console = 0;
if (strcmp(iaa->iaa_name, com_cd.cd_name) != 0)
return 0;
if (comconsiot != NULL)
console = iaa->iaa_memh + iaa->iaa_base ==
comconsiot->bus_base + comconsaddr;
/* if it's in use as console, it's there. */
if (!(console && !comconsattached)) {
if (bus_space_subregion(iot, iaa->iaa_memh,
iaa->iaa_base, COM_NPORTS, &ioh) == 0)
rv = comprobe1(iot, ioh);
} else
rv = 1;
/* make a config stanza with exact locators match over a generic line */
if (cf->cf_loc[0] != -1)
rv += rv;
return rv;
}
int
com_commulti_probe(struct device *parent, void *match, void *aux)
{
struct commulti_attach_args *ca = aux;
struct cfdata *cf = match;
bus_space_handle_t ioh;
bus_space_tag_t iot;
int iobase;
if (cf->cf_loc[0] != -1 && cf->cf_loc[0] != ca->ca_slave)
return (0);
iot = ca->ca_iot;
iobase = ca->ca_iobase;
ioh = ca->ca_ioh;
#ifdef KGDB
if (iobase == com_kgdb_addr)
return (1);
#endif
/* if it's in use as console, it's there. */
if (iobase == comconsaddr && !comconsattached)
return (1);
return (comprobe1(iot, ioh));
}
int
com_isa_probe(struct device *parent, void *match, void *aux)
{
struct isa_attach_args *ia = aux;
bus_space_handle_t ioh;
bus_space_tag_t iot;
int iobase;
int rv;
iot = ia->ia_iot;
iobase = ia->ia_iobase;
#ifdef KGDB
if (iobase == com_kgdb_addr)
goto out;
#endif
if (iobase == comconsaddr && !comconsattached)
goto out;
if (bus_space_map(iot, iobase, COM_NPORTS, 0, &ioh))
return (0);
rv = comprobe1(iot, ioh);
bus_space_unmap(iot, ioh, COM_NPORTS);
if (rv == 0)
return (0);
out:
ia->ia_iosize = COM_NPORTS;
ia->ia_msize = 0;
return (1);
}
int
cn30xxuart_probe(struct device *parent, void *match, void *aux)
{
struct cfdata *cf = match;
struct uartbus_attach_args *uba = aux;
bus_space_tag_t iot = uba->uba_memt;
bus_space_handle_t ioh;
int rv = 0, console;
if (strcmp(uba->uba_name, com_cd.cd_name) != 0)
return 0;
console = 1;
/* if it's in use as console, it's there. */
if (!(console && !comconsattached)) {
if (bus_space_map(iot, uba->uba_baseaddr, COM_NPORTS, 0, &ioh)) {
printf(": can't map uart registers\n");
return 1;
}
rv = comprobe1(iot, ioh);
} else
rv = 1;
/* make a config stanza with exact locators match over a generic line */
if (cf->cf_loc[0] != -1)
rv += rv;
return rv;
}
static int
gemini_com_match(device_t parent, cfdata_t cf, void *aux)
{
struct obio_attach_args *obio = aux;
bus_space_handle_t bh;
int rv;
if (obio->obio_addr == -1 || obio->obio_intr == -1)
panic("gemini_com must have addr and intr specified in config.");
if (obio->obio_size == 0)
obio->obio_size = GEMINI_UART_SIZE;
if (com_is_console(obio->obio_iot, obio->obio_addr, NULL))
return (1);
if (bus_space_map(obio->obio_iot, obio->obio_addr, obio->obio_size,
0, &bh))
return (0);
rv = comprobe1(obio->obio_iot, bh);
bus_space_unmap(obio->obio_iot, bh, obio->obio_size);
return (rv);
}
void
hd64465uart_attach(struct device *parent, struct device *self, void *aux)
{
struct hd64465_attach_args *ha = aux;
struct hd64465uart_softc *sc = (struct hd64465uart_softc *)self;
struct com_softc *csc = &sc->sc_com;
sc->sc_chip = &hd64465uart_chip;
sc->sc_module_id = ha->ha_module_id;
if (!sc->sc_chip->console)
hd64465uart_init();
csc->sc_iot = sc->sc_chip->io_tag;
bus_space_map(csc->sc_iot, 0, 8, 0, &csc->sc_ioh);
csc->sc_iobase = 0;
csc->sc_frequency = COM_FREQ;
/* supply clock XXX notyet */
/* sanity check */
if (!comprobe1(csc->sc_iot, csc->sc_ioh)) {
printf(": device problem. don't attach.\n");
/* stop clock XXX notyet */
return;
}
com_attach_subr(csc);
/* register interrupt handler */
hd64465_intr_establish(HD64465_UART, IST_LEVEL, IPL_TTY,
comintr, self);
}
static int
ixsipcom_match(device_t parent, cfdata_t match, void *aux)
{
struct ixpsip_attach_args *sa = aux;
bus_space_tag_t bt = &ixp425_a4x_bs_tag;
bus_space_handle_t bh;
int rv;
if (strcmp(match->cf_name, "ixsipcom") == 0)
return 1;
if (com_is_console(bt, sa->sa_addr, NULL))
return (1);
if (bus_space_map(bt, sa->sa_addr, sa->sa_size, 0, &bh))
return (0);
/* Make sure the UART is enabled */
bus_space_write_1(bt, bh, com_ier, IER_EUART);
rv = comprobe1(bt, bh);
bus_space_unmap(bt, bh, sa->sa_size);
return (rv);
}
static int
com_obio_match(device_t parent, cfdata_t cf, void *aux)
{
union obio_attach_args *uoba = aux;
struct sbus_attach_args *sa = &uoba->uoba_sbus;
int tadpole = 0;
int need_probe = 0;
int rv = 0;
uint8_t auxregval = 0;
if (uoba->uoba_isobio4 != 0) {
return (0);
}
/*
* Tadpole 3GX/3GS uses "modem" for a 16450 port
* (We need to enable it before probing)
*/
if (strcmp("modem", sa->sa_name) == 0) {
auxregval = *AUXIO4M_REG;
*AUXIO4M_REG = auxregval | (AUXIO4M_LED|AUXIO4M_LTE);
DELAY(100);
tadpole = 1;
need_probe = 1;
}
/*
* Sun JavaStation 1 uses "su" for a 16550 port
*/
if (strcmp("su", sa->sa_name) == 0) {
need_probe = 1;
}
if (need_probe) {
bus_space_handle_t ioh;
if (sbus_bus_map(sa->sa_bustag,
sa->sa_slot, sa->sa_offset, sa->sa_size,
BUS_SPACE_MAP_LINEAR, &ioh) == 0) {
rv = comprobe1(sa->sa_bustag, ioh);
#if 0
printf("modem: probe: lcr=0x%02x iir=0x%02x\n",
bus_space_read_1(sa->sa_bustag, ioh, 3),
bus_space_read_1(sa->sa_bustag, ioh, 2));
#endif
bus_space_unmap(sa->sa_bustag, ioh, sa->sa_size);
}
}
/* Disable the com port if tadpole */
if (tadpole)
*AUXIO4M_REG = auxregval;
return (rv);
}
int
comprobe(struct device *parent, struct cfdata *cfp, void *aux)
{
int iobase = (int)&IODEVbase->psx16550;
if (strcmp(aux, "com") || com_attached)
return 0;
if (!comprobe1(iobase))
return 0;
return 1;
}
int
com_isa_probe(device_t parent, cfdata_t match, void *aux)
{
bus_space_tag_t iot;
bus_space_handle_t ioh;
int iobase;
int rv = 1;
struct isa_attach_args *ia = aux;
if (ia->ia_nio < 1)
return (0);
if (ia->ia_nirq < 1)
return (0);
if (ISA_DIRECT_CONFIG(ia))
return (0);
/* Disallow wildcarded i/o address. */
if (ia->ia_io[0].ir_addr == ISA_UNKNOWN_PORT)
return (0);
/* Don't allow wildcarded IRQ. */
if (ia->ia_irq[0].ir_irq == ISA_UNKNOWN_IRQ)
return (0);
iot = ia->ia_iot;
iobase = ia->ia_io[0].ir_addr;
/* if it's in use as console, it's there. */
if (!com_is_console(iot, iobase, 0)) {
if (bus_space_map(iot, iobase, COM_NPORTS, 0, &ioh)) {
return 0;
}
rv = comprobe1(iot, ioh);
bus_space_unmap(iot, ioh, COM_NPORTS);
}
if (rv) {
ia->ia_nio = 1;
ia->ia_io[0].ir_size = COM_NPORTS;
ia->ia_nirq = 1;
ia->ia_niomem = 0;
ia->ia_ndrq = 0;
}
return (rv);
}
static int
awin_com_match(device_t parent, cfdata_t cf, void *aux)
{
struct awinio_attach_args * const aio = aux;
const struct awin_locators * const loc = &aio->aio_loc;
bus_space_tag_t iot = aio->aio_core_a4x_bst;
bus_space_handle_t bsh;
const struct awin_gpio_pinset *pinset;
if (awin_chip_id() == AWIN_CHIP_ID_A31) {
pinset = awin_com_pinsets_a31;
} else if (awin_chip_id() == AWIN_CHIP_ID_A80) {
pinset = awin_com_pinsets_a80;
} else {
pinset = loc->loc_port + ((cf->cf_flags & 1) ?
awin_com_alt_pinsets : awin_com_pinsets);
}
KASSERT(!strcmp(cf->cf_name, loc->loc_name));
#if defined(ALLWINNER_A80)
KASSERT(loc->loc_offset >= AWIN_A80_UART0_OFFSET);
KASSERT(loc->loc_offset <= AWIN_A80_UART5_OFFSET);
#else
KASSERT(loc->loc_offset >= AWIN_UART0_OFFSET);
KASSERT(loc->loc_offset <= AWIN_UART7_OFFSET);
#endif
KASSERT((loc->loc_offset & 0x3ff) == 0);
KASSERT((awin_com_ports & __BIT(loc->loc_port)) == 0);
KASSERT(cf->cf_loc[AWINIOCF_PORT] == AWINIOCF_PORT_DEFAULT
|| cf->cf_loc[AWINIOCF_PORT] == loc->loc_port);
if (!awin_gpio_pinset_available(pinset))
return 0;
if (com_is_console(iot, AWIN_CORE_PBASE + loc->loc_offset, NULL))
return 1;
awin_gpio_pinset_acquire(pinset);
bus_space_subregion(iot, aio->aio_core_bsh,
loc->loc_offset, loc->loc_size, &bsh);
const int rv = comprobe1(iot, bsh);
awin_gpio_pinset_release(pinset);
return rv;
}
int
pxauart_match(struct device *parent, void *cf, void *aux)
{
struct pxaip_attach_args *pxa = aux;
bus_space_tag_t bt = &pxa2x0_a4x_bs_tag; /* XXX: This sucks */
bus_space_handle_t bh;
int rv;
switch (pxa->pxa_addr) {
case PXA2X0_FFUART_BASE:
if (pxa->pxa_intr != PXA2X0_INT_FFUART)
return (0);
break;
case PXA2X0_STUART_BASE:
if (pxa->pxa_intr != PXA2X0_INT_STUART)
return (0);
break;
case PXA2X0_BTUART_BASE: /* XXX: Config file option ... */
if (pxa->pxa_intr != PXA2X0_INT_BTUART)
return (0);
break;
default:
return (0);
}
pxa->pxa_size = 0x20;
{
extern bus_addr_t comconsaddr;
if (comconsaddr == pxa->pxa_addr)
return (1);
}
if (bus_space_map(bt, pxa->pxa_addr, pxa->pxa_size, 0, &bh))
return (0);
/* Make sure the UART is enabled */
bus_space_write_1(bt, bh, com_ier, IER_EUART);
rv = comprobe1(bt, bh);
bus_space_unmap(bt, bh, pxa->pxa_size);
return (rv);
}
int
com_macebus_probe(struct device *parent, void *match, void *aux)
{
struct macebus_attach_args *maa = aux;
bus_space_handle_t ioh;
int rv;
/* If it's in use as the console, then it's there. */
if (maa->maa_baseaddr == comconsaddr && !comconsattached)
return (1);
if (bus_space_map(maa->maa_iot, maa->maa_baseaddr, COM_NPORTS, 0, &ioh))
return (0);
rv = comprobe1(maa->maa_iot, ioh);
bus_space_unmap(maa->maa_iot, ioh, COM_NPORTS);
return rv;
}
int
com_multi_probe(device_t parent, cfdata_t match, void *aux)
{
int iobase;
struct cfdata *cf = match;
struct commulti_attach_args *ca = aux;
if (cf->cf_loc[COMMULTICF_SLAVE] != COMMULTICF_SLAVE_DEFAULT &&
cf->cf_loc[COMMULTICF_SLAVE] != ca->ca_slave)
return (0);
iobase = ca->ca_iobase;
/* if it's in use as console, it's there. */
if (com_is_console(ca->ca_iot, iobase, 0))
return 1;
return comprobe1(ca->ca_iot, ca->ca_ioh);
}
static int
obiouart_match(device_t parent, cfdata_t cf, void *aux)
{
struct obio_attach_args *obio = aux;
bus_space_handle_t bsh;
bus_addr_t ioaddr;
switch (obio->obio_base) {
case ROCKCHIP_CORE0_BASE:
KASSERT(obio->obio_offset == ROCKCHIP_UART0_OFFSET ||
obio->obio_offset == ROCKCHIP_UART1_OFFSET);
break;
case ROCKCHIP_CORE1_BASE:
KASSERT(obio->obio_offset == ROCKCHIP_UART2_OFFSET ||
obio->obio_offset == ROCKCHIP_UART3_OFFSET);
break;
default:
panic("obiouart must have addr specified in config.");
}
ioaddr = obio->obio_base + obio->obio_offset;
#if 0
/*
* XXX this should be ifdefed on a board-dependent switch
* We don't know what is the irq for com0 on the sdp2430
*/
if (obio->obio_intr == OBIOCF_INTR_DEFAULT)
panic("obiouart must have intr specified in config.");
#endif
if (obio->obio_size == OBIOCF_SIZE_DEFAULT)
obio->obio_size = ROCKCHIP_UART_SIZE;
if (com_is_console(obio->obio_bst, ioaddr, NULL))
return 1;
bus_space_subregion(obio->obio_bst, obio->obio_bsh, obio->obio_size, 0,
&bsh);
return comprobe1(obio->obio_bst, bsh);
}
static int
com_ebus_match(device_t parent, cfdata_t cf, void *aux)
{
struct ebus_attach_args *ea = aux;
bus_space_handle_t ioh;
int match;
if (strcmp(ea->ea_name, "su") != 0)
return (0);
match = 0;
if (bus_space_map(ea->ea_bustag, EBUS_ADDR_FROM_REG(&ea->ea_reg[0]),
ea->ea_reg[0].size, 0, &ioh) == 0)
{
match = comprobe1(ea->ea_bustag, ioh);
bus_space_unmap(ea->ea_bustag, ioh, ea->ea_reg[0].size);
}
return (match);
}
static int
amlogic_com_match(device_t parent, cfdata_t cf, void *aux)
{
struct amlogicio_attach_args * const aio = aux;
const struct amlogic_locators * const loc = &aio->aio_loc;
bus_space_tag_t iot = aio->aio_core_a4x_bst;
bus_space_handle_t bsh;
KASSERT(!strcmp(cf->cf_name, loc->loc_name));
KASSERT((amlogic_com_ports & __BIT(loc->loc_port)) == 0);
KASSERT(cf->cf_loc[AMLOGICIOCF_PORT] == AMLOGICIOCF_PORT_DEFAULT
|| cf->cf_loc[AMLOGICIOCF_PORT] == loc->loc_port);
if (com_is_console(iot, AMLOGIC_CORE_BASE + loc->loc_offset, NULL))
return 1;
bus_space_subregion(iot, aio->aio_bsh,
loc->loc_offset, loc->loc_size, &bsh);
const int rv = comprobe1(iot, bsh);
return rv;
}
static int
pxauart_match(device_t parent, cfdata_t cf, void *aux)
{
struct pxaip_attach_args *pxa = aux;
bus_space_tag_t bt = &pxa2x0_a4x_bs_tag; /* XXX: This sucks */
bus_space_handle_t bh;
struct pxa2x0_gpioconf *gpioconf;
u_int gpio;
int rv, i;
switch (pxa->pxa_addr) {
case PXA2X0_FFUART_BASE:
if (pxa->pxa_intr != PXA2X0_INT_FFUART)
return (0);
gpioconf = CPU_IS_PXA250 ? pxa25x_com_ffuart_gpioconf :
pxa27x_com_ffuart_gpioconf;
break;
case PXA2X0_STUART_BASE:
if (pxa->pxa_intr != PXA2X0_INT_STUART)
return (0);
gpioconf = CPU_IS_PXA250 ? pxa25x_com_stuart_gpioconf :
pxa27x_com_stuart_gpioconf;
break;
case PXA2X0_BTUART_BASE: /* XXX: Config file option ... */
if (pxa->pxa_intr != PXA2X0_INT_BTUART)
return (0);
gpioconf = CPU_IS_PXA250 ? pxa25x_com_btuart_gpioconf :
pxa27x_com_btuart_gpioconf;
break;
case PXA2X0_HWUART_BASE:
if (pxa->pxa_intr != PXA2X0_INT_HWUART)
return (0);
if (CPU_IS_PXA270)
return (0);
gpioconf = pxa25x_com_hwuart_gpioconf;
break;
default:
return (0);
}
for (i = 0; gpioconf[i].pin != -1; i++) {
gpio = pxa2x0_gpio_get_function(gpioconf[i].pin);
if (GPIO_FN(gpio) != GPIO_FN(gpioconf[i].value) ||
GPIO_FN_IS_OUT(gpio) != GPIO_FN_IS_OUT(gpioconf[i].value))
return (0);
}
pxa->pxa_size = 0x20;
if (com_is_console(bt, pxa->pxa_addr, NULL))
return (1);
if (bus_space_map(bt, pxa->pxa_addr, pxa->pxa_size, 0, &bh))
return (0);
/* Make sure the UART is enabled */
bus_space_write_1(bt, bh, com_ier, IER_EUART);
rv = comprobe1(bt, bh);
bus_space_unmap(bt, bh, pxa->pxa_size);
return (rv);
}
int
ioat66probe(device_t parent, cfdata_t self, void *aux)
{
struct isa_attach_args *ia = aux;
bus_space_tag_t iot = ia->ia_iot;
bus_space_handle_t ioh;
int iobase;
int i, rv = 1;
if (ia->ia_niomem < 1)
return (0);
if (ia->ia_nirq < 1)
return (0);
/*
* Do the normal com probe for the first UART and assume
* its presence, and the ability to map the other UARTS,
* means there is a multiport board there.
* XXX Needs more robustness.
*/
/* Disallow wildcarded i/o address. */
if (ia->ia_io[0].ir_addr == ISA_UNKNOWN_PORT)
return 0;
if (ia->ia_irq[0].ir_irq == ISA_UNKNOWN_IRQ)
return (0);
iobase = ia->ia_io[0].ir_addr;
/* if the first port is in use as console, then it. */
if (com_is_console(iot, iobase, 0))
goto checkmappings;
if (bus_space_map(iot, iobase, COM_NPORTS, 0, &ioh)) {
rv = 0;
goto out;
}
rv = comprobe1(iot, ioh);
bus_space_unmap(iot, ioh, COM_NPORTS);
if (rv == 0)
goto out;
checkmappings:
for (i = 1; i < NSLAVES; i++) {
iobase = ioatbases[i];
if (com_is_console(iot, iobase, 0))
continue;
if (bus_space_map(iot, iobase, COM_NPORTS, 0, &ioh)) {
rv = 0;
goto out;
}
bus_space_unmap(iot, ioh, COM_NPORTS);
}
out:
if (rv) {
ia->ia_nio = 1;
ia->ia_io[0].ir_size = NSLAVES * COM_NPORTS;
ia->ia_nirq = 1;
ia->ia_niomem = 0;
ia->ia_ndrq = 0;
}
return (rv);
}