void ChatWindow::updateConnection(ConnectionObject *connection) { if( connection == m_chatConnection ){ return; } disconnect( this, SLOT(connectionChanged()) ); disconnect( this, SLOT(connectionDestroyed()) ); m_chatConnection = connection; connect( m_chatConnection, SIGNAL(sigChange(ConnectionObject*)), this, SLOT(connectionChanged()) ); connect( m_chatConnection, SIGNAL(destroyed()), this, SLOT(connectionDestroyed()) ); connectionChanged(); }
void Connection::setUserEmail(const QString &v) { if (userEmail_ == v) return; userEmail_ = v; emit connectionChanged(); }
void ContactUser::onConnected() { m_settings->write("lastConnected", QDateTime::currentDateTime()); if (m_contactRequest && m_connection->purpose() == Protocol::Connection::Purpose::OutboundRequest) { qDebug() << "Sending contact request for" << uniqueID << nickname(); m_contactRequest->sendRequest(m_connection); } if (!m_settings->read("sentUpgradeNotification").isNull()) m_settings->unset("sentUpgradeNotification"); /* The 'rejected' mark comes from failed authentication to someone who we thought was a known * contact. Normally, it would mean that you were removed from that person's contacts. It's * possible for this to be undone; for example, if that person sends you a new contact request, * it will be automatically accepted. If this happens, unset the 'rejected' flag for correct UI. */ if (m_settings->read("rejected").toBool()) { qDebug() << "Contact had marked us as rejected, but now they've connected again. Re-enabling."; m_settings->unset("rejected"); } updateStatus(); if (isConnected()) { emit connected(); emit connectionChanged(m_connection); } if (m_status != Online && m_status != RequestPending) { BUG() << "Contact has a connection while in status" << m_status << "which is not expected."; m_connection->close(); } }
void NetworkSession::onNetworkConfigurationChanged(const QNetworkConfiguration& config) { if (d.enabled && config.state() == QNetworkConfiguration::Active && d.config.state() != QNetworkConfiguration::Active) { d.config = config; emit connectionChanged(); } }
void HexySerial::closeSerialPort() { if (serial->isOpen()) { serial->close(); emit connectionChanged(); } qDebug()<<"Disconnected"; }
bool OSCQueryDevice::reconnect() { const auto& cur_settings = settings(); const auto& stgs = cur_settings.deviceSpecificSettings.value<OSCQuerySpecificSettings>(); if (m_dev && m_mirror && m_oldSettings == cur_settings) { // TODO update settings try { m_mirror->reconnect(); m_connected = true; } catch (std::exception& e) { qDebug() << "Could not connect: " << e.what(); m_connected = false; } catch (...) { // TODO save the reason of the non-connection. m_connected = false; } connectionChanged(m_connected); return connected(); } disconnect(); std::thread resolver([this, host = stgs.host.toStdString()] { bool ok = resolve_ip(host); if (ok) { sig_createDevice(); } m_connected = false; connectionChanged(m_connected); }); resolver.detach(); return connected(); }
void Connection::setApiKey(const QString &v) { if (apiKey_ == v) return; apiKey_ = v; emit connectionChanged(); updateValidFlag(); }
void BrowseModel::setEnabled(bool e) { if (e==enabled) { return; } enabled=e; if (enabled) { connect(MPDConnection::self(), SIGNAL(folderContents(QString,QStringList,QList<Song>)), this, SLOT(folderContents(QString,QStringList,QList<Song>))); connect(MPDConnection::self(), SIGNAL(connectionChanged(MPDConnectionDetails)), this, SLOT(connectionChanged())); connect(MPDConnection::self(), SIGNAL(statsUpdated(MPDStatsValues)), this, SLOT(statsUpdated(MPDStatsValues))); } else { disconnect(MPDConnection::self(), SIGNAL(folderContents(QString,QStringList,QList<Song>)), this, SLOT(folderContents(QString,QStringList,QList<Song>))); disconnect(MPDConnection::self(), SIGNAL(connectionChanged(MPDConnectionDetails)), this, SLOT(connectionChanged())); disconnect(MPDConnection::self(), SIGNAL(statsUpdated(MPDStatsValues)), this, SLOT(statsUpdated(MPDStatsValues))); clear(); } }
//============================================================================== // Client Connection Changed Slot //============================================================================== void TestClient::clientConnectionChanged(const unsigned int& aID, const bool& aConnected) { qDebug() << "TestClient::clientConnectionChanged - aID: " << aID << " - aConnected: " << aConnected; // ... // Emit Connection Changed Signal emit connectionChanged(this, aConnected); }
void OSCQueryDevice::slot_createDevice() { const auto& cur_settings = settings(); const auto& stgs = cur_settings.deviceSpecificSettings.value<OSCQuerySpecificSettings>(); try { std::unique_ptr<ossia::net::protocol_base> ossia_settings = std::make_unique<ossia::oscquery::oscquery_mirror_protocol>( stgs.host.toStdString()); auto& p = static_cast<ossia::oscquery::oscquery_mirror_protocol&>( *ossia_settings); m_mirror = &p; if (stgs.rate) { ossia_settings = std::make_unique<ossia::net::rate_limiting_protocol>( std::chrono::milliseconds{*stgs.rate}, std::move(ossia_settings)); } // run the commands in the Qt event loop // FIXME they should be disabled upon manual disconnection m_dev = std::make_unique<ossia::net::generic_device>( std::move(ossia_settings), settings().name.toStdString()); deviceChanged(nullptr, m_dev.get()); p.set_command_callback([=] { sig_command(); }); p.set_disconnect_callback([=] { sig_disconnect(); }); p.set_fail_callback([=] { sig_disconnect(); }); setLogging_impl(Device::get_cur_logging(isLogging())); enableCallbacks(); m_connected = true; } catch (std::exception& e) { qDebug() << "Could not connect: " << e.what(); m_connected = false; if (!m_dev) m_mirror = nullptr; } catch (...) { // TODO save the reason of the non-connection. m_connected = false; if (!m_dev) m_mirror = nullptr; } connectionChanged(m_connected); }
HexyTool::HexyTool(QWidget *parent) : QWidget(parent) , ui(new Ui::HexyTool) , serial(new HexySerial(this)) , settings(nullptr) { ui->setupUi(this); ui->tryToggleConnect->configure("Connect","Connecting","Connected", "#e1be4e"); if(!connect(serial,SIGNAL(settingsChanged()), this, SLOT(onHexySettingsChanged()))) { qWarning()<<"ERROR: could not connect"; } if(!connect(serial,SIGNAL(connectionChanged()), this, SLOT(onHexyConenctionChanged()))) { qWarning()<<"ERROR: could not connect"; } if(!connect(ui->tryToggleConnect, SIGNAL(stateChanged(const TryToggleState, const TryToggleState)), this, SLOT(onConnectChanged(const TryToggleState, const TryToggleState)))) { qWarning()<<"ERROR: could not connect"; } if(!connect(ui->widgetLimbIK, SIGNAL(IKUpadted()), this, SLOT(onLimbIKUpdated()))) { qWarning()<<"ERROR: could not connect"; } for(quint32 i=0; i<HexySerial::SERVO_COUNT; ++i) { ServoInput *si=new ServoInput(); if(0!=si) { si->configure(settings,i); if(!connect(si,SIGNAL(servoMoved(quint32, qreal)),this,SLOT(onServoMoved(quint32, qreal)),OC_CONTYPE)) { qWarning()<<"ERROR: could not connect"; } if(!connect(si,SIGNAL(servoKilled(quint32)),this,SLOT(onServoKilled(quint32)),OC_CONTYPE)) { qWarning()<<"ERROR: could not connect"; } ui->scrollAreaWidgetContents->layout()->addWidget(si); } } QSpacerItem *vs = new QSpacerItem(20, 40, QSizePolicy::Minimum, QSizePolicy::Expanding); ui->verticalLayoutServos->addItem(vs); ui->scrollAreaServos->setEnabled(false); ui->widgetGait->setGait(gait); killAll(); gaitTimer.setTimerType(Qt::PreciseTimer); gaitTimer.setInterval(40); if(!connect(&gaitTimer,SIGNAL(timeout()),this,SLOT(onUpdateGaitTimer()))) { qWarning()<<"ERROR: Could not connect"; } gait.setDirection(0.5,0.5); }
MpdLibraryDb::MpdLibraryDb(QObject *p) : LibraryDb(p, "MPD") , loading(false) , coverQuery(nullptr) , albumIdOnlyCoverQuery(nullptr) , artistImageQuery(nullptr) { connect(MPDConnection::self(), SIGNAL(updatingLibrary(time_t)), this, SLOT(updateStarted(time_t))); connect(MPDConnection::self(), SIGNAL(librarySongs(QList<Song>*)), this, SLOT(insertSongs(QList<Song>*))); connect(MPDConnection::self(), SIGNAL(updatedLibrary()), this, SLOT(updateFinished())); connect(MPDConnection::self(), SIGNAL(statsUpdated(MPDStatsValues)), this, SLOT(statsUpdated(MPDStatsValues))); connect(this, SIGNAL(loadLibrary()), MPDConnection::self(), SLOT(loadLibrary())); connect(MPDConnection::self(), SIGNAL(connectionChanged(MPDConnectionDetails)), this, SLOT(connectionChanged(MPDConnectionDetails))); DBUG; }
void HexySerial::openSerialPort() { SerialSettings p = settings->settings(); serial->setPortName(p.name); serial->setBaudRate(p.baudRate); serial->setDataBits(p.dataBits); serial->setParity(p.parity); serial->setStopBits(p.stopBits); serial->setFlowControl(p.flowControl); if (serial->open(QIODevice::ReadWrite)) { qDebug()<<tr("Connected to %1 : %2, %3, %4, %5, %6").arg(p.name).arg(p.stringBaudRate).arg(p.stringDataBits).arg(p.stringParity).arg(p.stringStopBits).arg(p.stringFlowControl); emit connectionChanged(); } else { qDebug()<<"ERROR OPENING: "<<serial->errorString(); } }
void Client::setConnection(Connection *connection) { Q_D(Client); if (d->connection != connection) { if (d->connection) { d->connection.data()->deleteLater(); } d->connection = connection; connect(connection, SIGNAL(connectionStateChanged(Vreen::Client::State)), this, SLOT(_q_connection_state_changed(Vreen::Client::State))); connect(connection, SIGNAL(error(Vreen::Client::Error)), this, SIGNAL(error(Vreen::Client::Error))); emit connectionChanged(d->connection); } }
void MainWindow::startSensorThread() { sensorThread = new SensorThread(); //QObject::connect(sensorThread, SIGNAL(receivedData(QPair<SensorData*,SensorData*>,QPair<SensorData*,SensorData*>,QPair<SensorData*,SensorData*>)), this, SLOT(printData(QPair<SensorData*,SensorData*>,QPair<SensorData*,SensorData*>,QPair<SensorData*,SensorData*>))); QObject::connect(sensorThread, SIGNAL(receivedData(QPair<SensorData*,SensorData*>,QPair<SensorData*,SensorData*>,QPair<SensorData*,SensorData*>)), this, SLOT(updateCursors(QPair<SensorData*,SensorData*>,QPair<SensorData*,SensorData*>,QPair<SensorData*,SensorData*>))); QObject::connect(sensorThread, SIGNAL(receivedData(QPair<SensorData*,SensorData*>,QPair<SensorData*,SensorData*>,QPair<SensorData*,SensorData*>)), getWidget(WidgetType::settingsWidget), SLOT(displayData(QPair<SensorData*,SensorData*>,QPair<SensorData*,SensorData*>,QPair<SensorData*,SensorData*>))); QObject::connect(sensorThread, SIGNAL(receivedData(QPair<SensorData*,SensorData*>,QPair<SensorData*,SensorData*>,QPair<SensorData*,SensorData*>)), getWidget(WidgetType::homeWidget), SLOT(switchMenu(QPair<SensorData*,SensorData*>,QPair<SensorData*,SensorData*>,QPair<SensorData*,SensorData*>))); QObject::connect(sensorThread, SIGNAL(receivedData(QPair<SensorData*,SensorData*>,QPair<SensorData*,SensorData*>,QPair<SensorData*,SensorData*>)), getWidget(WidgetType::desktopWidget), SLOT(switchMenu(QPair<SensorData*,SensorData*>,QPair<SensorData*,SensorData*>,QPair<SensorData*,SensorData*>))); QObject::connect(sensorThread, SIGNAL(receivedData(QPair<SensorData*,SensorData*>,QPair<SensorData*,SensorData*>,QPair<SensorData*,SensorData*>)), getWidget(WidgetType::galleryWidget), SLOT(displayData(QPair<SensorData*,SensorData*>,QPair<SensorData*,SensorData*>,QPair<SensorData*,SensorData*>))); QObject::connect(sensorThread, SIGNAL(connectionChanged(QString)), getWidget(WidgetType::loadingWidget), SLOT(updateSubtitle(QString))); QObject::connect(sensorThread, SIGNAL(initializationChanged(WidgetType)), this, SLOT(setActiveWidget(WidgetType))); QObject::connect(getWidget(WidgetType::homeWidget), SIGNAL(menuSelected(WidgetType)), this, SLOT(setActiveWidget(WidgetType))); QObject::connect(sensorThread, SIGNAL(finished()), sensorThread, SLOT(deleteLater())); for (int i = 0; i < widgetsList.size(); i++){ QObject::connect(sensorThread, SIGNAL(receivedData(QPair<SensorData*,SensorData*>,QPair<SensorData*,SensorData*>,QPair<SensorData*,SensorData*>)), widgetsList[i], SLOT(collapse(QPair<SensorData*,SensorData*>,QPair<SensorData*,SensorData*>,QPair<SensorData*,SensorData*>))); QObject::connect(widgetsList[i], SIGNAL(returnHome(WidgetType)), this, SLOT(setActiveWidget(WidgetType)));} sensorThread->start(); }
void XmppStream::setConnection(IConnection *AConnection) { if (FStreamState==SS_OFFLINE && FConnection!=AConnection) { if (FConnection) FConnection->instance()->disconnect(this); if (AConnection) { connect(AConnection->instance(),SIGNAL(connected()),SLOT(onConnectionConnected())); connect(AConnection->instance(),SIGNAL(readyRead(qint64)),SLOT(onConnectionReadyRead(qint64))); connect(AConnection->instance(),SIGNAL(error(const QString &)),SLOT(onConnectionError(const QString &))); connect(AConnection->instance(),SIGNAL(disconnected()),SLOT(onConnectionDisconnected())); } FConnection = AConnection; emit connectionChanged(AConnection); } }
void ContactUser::onDisconnected() { qDebug() << "Contact" << uniqueID << "disconnected"; m_settings->write("lastConnected", QDateTime::currentDateTime()); if (m_connection) { if (m_connection->isConnected()) { BUG() << "onDisconnected called, but connection is still connected"; return; } m_connection.clear(); } else { BUG() << "onDisconnected called without a connection"; } updateStatus(); emit disconnected(); emit connectionChanged(m_connection); }
void AbstractInputSlot::setFeedback(bool isFeedback) { m_isFeedback = isFeedback; connectionChanged(); }
FastForwardImporterConfig::FastForwardImporterConfig( QWidget *parent ) : DatabaseImporterConfig( parent ) { QString fastForwardDataPath = QDir::homePath() + "/.kde/share/apps/amarok"; QWidget *gridHolder = new QWidget( this ); QGridLayout *databaseLayout = new QGridLayout( gridHolder ); QLabel *connectionLabel = new QLabel( i18n( "Connection" ), gridHolder ); m_connectionCombo = new QComboBox( gridHolder ); m_connectionCombo->insertItem( 0, "SQLite", FastForwardImporter::SQLite ); m_connectionCombo->insertItem( 1, "MySQL", FastForwardImporter::MySQL ); m_connectionCombo->insertItem( 2, "PostgreSQL", FastForwardImporter::PostgreSQL ); m_databaseLocationLabel = new QLabel( i18n( "Database Location" ), gridHolder ); m_databaseLocationInput = new QLineEdit( gridHolder ); QCompleter *completer = new QCompleter( this ); completer->setModel( new QDirModel( completer ) ); m_databaseLocationInput->setCompleter( completer ); m_databaseLocationInput->setText( fastForwardDataPath + "/collection.db" ); m_databaseLocationLabel->setBuddy( m_databaseLocationInput ); m_usernameLabel = new QLabel( i18n( "Username" ), gridHolder ); m_usernameInput = new QLineEdit( gridHolder ); m_usernameLabel->setBuddy( m_usernameInput ); m_passwordLabel = new QLabel( i18n( "Password" ), gridHolder ); m_passwordInput = new QLineEdit( gridHolder ); m_passwordInput->setEchoMode( QLineEdit::Password ); m_passwordLabel->setBuddy( m_passwordInput ); m_databaseLabel = new QLabel( i18n( "Database Name" ), gridHolder ); m_databaseInput = new QLineEdit( gridHolder ); m_databaseLabel->setBuddy( m_databaseInput ); m_hostnameLabel = new QLabel( i18n( "Hostname" ), gridHolder ); m_hostnameInput = new QLineEdit( gridHolder ); m_hostnameInput->setText( "localhost" ); m_hostnameLabel->setBuddy( m_hostnameInput ); databaseLayout->addWidget( connectionLabel, 0, 0 ); databaseLayout->addWidget( m_connectionCombo, 0, 1 ); databaseLayout->addWidget( m_usernameLabel, 1, 0 ); databaseLayout->addWidget( m_usernameInput, 1, 1 ); databaseLayout->addWidget( m_passwordLabel, 2, 0 ); databaseLayout->addWidget( m_passwordInput, 2, 1 ); databaseLayout->addWidget( m_databaseLabel, 3, 0 ); databaseLayout->addWidget( m_databaseInput, 3, 1 ); databaseLayout->addWidget( m_hostnameLabel, 4, 0 ); databaseLayout->addWidget( m_hostnameInput, 4, 1 ); databaseLayout->addWidget( m_databaseLocationLabel, 5, 0 ); databaseLayout->addWidget( m_databaseLocationInput, 5, 1 ); gridHolder->setLayout( databaseLayout ); connect( m_connectionCombo, SIGNAL( currentIndexChanged( int ) ), SLOT( connectionChanged( int ) ) ); connectionChanged( m_connectionCombo->currentIndex() ); // Make sure we sync the UI as appropriate m_smartMatchCheck = new QCheckBox( i18n( "Match tracks by meta tags" ), this ); m_smartMatchCheck->setToolTip( i18n( "Perform meta information search on non-existing " "files, possibly detecting file renames. See <b>What's This</b>" ) ); m_smartMatchCheck->setWhatsThis( i18n( "If enabled, tracks from the old collection that " "do not exist anymore in the file system are searched for (by metadata) in the current " "collection. If a match is found, statistics for the matched track are updated, " "even if the file locations differ." ) ); m_smartMatchCheck->setChecked( true ); m_importArtworkCheck = new QCheckBox( i18n( "Import downloaded artwork" ), this ); m_importArtworkCheck->setChecked( true ); const QString oldCoverPath = fastForwardDataPath + "/albumcovers/large/"; QWidget *artworkDirHolder = new QWidget( this ); QGridLayout *artworkDirLayout = new QGridLayout( artworkDirHolder ); QLabel *artworkDirLabel = new QLabel( i18n( "Artwork directory" ), artworkDirHolder ); m_importArtworkDirInput = new QLineEdit( artworkDirHolder ); m_importArtworkDirInput->setText( oldCoverPath ); artworkDirLayout->addWidget( artworkDirLabel, 0, 0 ); artworkDirLayout->addWidget( m_importArtworkDirInput, 0, 1 ); artworkDirHolder->setLayout( artworkDirLayout ); connect( m_importArtworkCheck, SIGNAL( stateChanged( int ) ), SLOT( importArtworkChanged( int ) ) ); QWidget *spacer = new QWidget( this ); spacer->setSizePolicy( QSizePolicy::MinimumExpanding, QSizePolicy::MinimumExpanding ); }
void ContactWrapper::setupAccountConnects() { // keep track of presence (online/offline is all we need) connect(m_account.data(), SIGNAL(connectionChanged(Tp::ConnectionPtr)), this, SLOT(onConnectionChanged(Tp::ConnectionPtr))); connect(m_account.data(), SIGNAL(currentPresenceChanged(Tp::Presence)), this, SIGNAL(accountPresenceChanged())); }
FastForwardImporterConfig::FastForwardImporterConfig( QWidget *parent ) : DatabaseImporterConfig( parent ) { QWidget *gridHolder = new QWidget( this ); QGridLayout *databaseLayout = new QGridLayout( gridHolder ); QLabel *connectionLabel = new QLabel( i18n("Connection"), gridHolder ); m_connectionCombo = new QComboBox( gridHolder ); m_connectionCombo->insertItem( 0, "SQLite", FastForwardImporter::SQLite ); m_connectionCombo->insertItem( 1, "MySQL", FastForwardImporter::MySQL ); m_connectionCombo->insertItem( 2, "PostgreSQL", FastForwardImporter::PostgreSQL ); m_databaseLocationLabel = new QLabel( i18n("Database Location"), gridHolder ); m_databaseLocationInput = new QLineEdit( gridHolder ); QCompleter *completer = new QCompleter( this ); completer->setModel( new QDirModel( completer ) ); m_databaseLocationInput->setCompleter( completer ); m_databaseLocationInput->setText( QDir::homePath() + "/.kde/share/apps/amarok/collection.db" ); m_databaseLocationLabel->setBuddy( m_databaseLocationInput ); m_usernameLabel = new QLabel( i18n("Username"), gridHolder ); m_usernameInput = new QLineEdit( gridHolder ); m_usernameLabel->setBuddy( m_usernameInput ); m_passwordLabel = new QLabel( i18n("Password"), gridHolder ); m_passwordInput = new QLineEdit( gridHolder ); m_passwordInput->setEchoMode( QLineEdit::Password ); m_passwordLabel->setBuddy( m_passwordInput ); m_databaseLabel = new QLabel( i18n("Database Name"), gridHolder ); m_databaseInput = new QLineEdit( gridHolder ); m_databaseLabel->setBuddy( m_databaseInput ); m_hostnameLabel = new QLabel( i18n("Hostname"), gridHolder ); m_hostnameInput = new QLineEdit( gridHolder ); m_hostnameInput->setText( "localhost" ); m_hostnameLabel->setBuddy( m_hostnameInput ); databaseLayout->addWidget( connectionLabel, 0, 0 ); databaseLayout->addWidget( m_connectionCombo, 0, 1 ); databaseLayout->addWidget( m_usernameLabel, 1, 0 ); databaseLayout->addWidget( m_usernameInput, 1, 1 ); databaseLayout->addWidget( m_passwordLabel, 2, 0 ); databaseLayout->addWidget( m_passwordInput, 2, 1 ); databaseLayout->addWidget( m_databaseLabel, 3, 0 ); databaseLayout->addWidget( m_databaseInput, 3, 1 ); databaseLayout->addWidget( m_hostnameLabel, 4, 0 ); databaseLayout->addWidget( m_hostnameInput, 4, 1 ); databaseLayout->addWidget( m_databaseLocationLabel, 5, 0 ); databaseLayout->addWidget( m_databaseLocationInput, 5, 1 ); gridHolder->setLayout( databaseLayout ); connect( m_connectionCombo, SIGNAL( currentIndexChanged(int) ), SLOT( connectionChanged(int) ) ); connectionChanged( m_connectionCombo->currentIndex() ); // Make sure we sync the UI as appropriate m_importArtworkCheck = new QCheckBox( i18n("Import downloaded artwork"), this ); m_importArtworkCheck->setChecked( true ); const QString oldCoverPath = Amarok::saveLocation( "albumcovers/large/" ).replace("kde4", "kde"); QWidget *artworkDirHolder = new QWidget( this ); QGridLayout *artworkDirLayout = new QGridLayout( artworkDirHolder ); QLabel *artworkDirLabel = new QLabel( i18n("Artwork directory"), artworkDirHolder ); m_importArtworkDirInput = new QLineEdit( artworkDirHolder ); m_importArtworkDirInput->setText( oldCoverPath ); artworkDirLayout->addWidget( artworkDirLabel, 0, 0 ); artworkDirLayout->addWidget( m_importArtworkDirInput, 0, 1 ); artworkDirHolder->setLayout( artworkDirLayout ); connect( m_importArtworkCheck, SIGNAL( stateChanged(int) ), SLOT( importArtworkChanged(int) ) ); QWidget *spacer = new QWidget( this ); spacer->setSizePolicy( QSizePolicy::MinimumExpanding, QSizePolicy::MinimumExpanding ); }